PolyFlexTM TPU90

For other languages, please visit

www.polymaker.com
INDEX

1.0 My first print 4,5 4.0 Polymaker Technologies

2.0 PolyFlexTM TPU90 4.1 Jam-Free™ 10

2.1 Product data sheet 6 4.2 Warp-Free™ 10

2.2 Product comparison charts 7 4.3 Ash-Free™ 10

3.0 Product Families 4.4 Layer-Free™ 11

3.1 PolyLite™ 8 4.5 Nano-Reinforcement 11

3.2 PolyMax™ 8 4.6 Stabilized Foaming™ 11

3.3 PolyFlex™ 8 5.0 Hardware

3.4 PolyMide™ 9 5.1 PolyBoxTM 12

3.5 PolyDissolve™ 9 5.2 Polysher TM

13

3.6 Specialty 9 6.0 About Polymaker 14

7.0 Contact Us 15
 My first print
1) Prepare the gcode
Download the MyFirstPrint.stl on www.polymaker.com
Load the stl file in your favorite slicer.
Enter the correct settings for PolyFlex™ TPU90;

Property Value
Nozzle temperature 210˚C - 230˚C
Bed temperature 25˚C - 60˚C
Nozzle speed 30mm/s – 60mm/s
Cooling fan ON
Layer height 0.2
Infill 20%
Number of outlines (shell) 3
Top/Bottom layers 4

Note: It is recommended to slightly increase the extrusion multiplier (+0.2) to ensure a more
consistent extrusion.

2) Prepare the printer

- Clean the build plate and prepare it with the right surface:
We recommend to print PolyFlex™ TPU90 on BuildTak®, glass with glue
or painters tape.
- Level the build plate.
- It is recommended to clean the nozzle when you change the material to
prevent partial clog.

Note: It is recommended to place the printer in a well ventilated area.

4
3) Prepare the filament

- Carefully open the resealable bag, remove the spool and close the bag
back to preserve the desiccant bag.
- It is recommended to store PolyFlex™ TPU90 in the PolyBox™ to pre-
vent moisture absorption which will lower the quality and the mechanical
properties of the print.
- Load the filament in your printer and wait until you have a consistent
extrusion.
- At the end of the print, make sure to correctly store the filament back in
the resealable bag if you are not using the PolyBox™

4) Start the print

When the print begins make sure the first layer is correctly laid down and
sticking well to the bed before leaving the printer to finish the print.

5
 PolyFlexTM TPU90
PolyFlex™ TPU90, created from Covestro’s Addigy® family, is a
thermoplastic polyurethane (TPU) based filament designed to provide
great flexibility without compromising on printing speed. It also have the
ability to resist ultra-violet (UV) light or sunlight.

Available colors:

Physical properties

Property Testing method Typical value

Density ASTM D792 (ISO 1183, GB/T 1033) 1.12 (g/cm3 at 21.5°C)
Melt Index 185 °C, 1.2 kg 6.1 (g/10 min)

Mechanical properties
Property Testing method Typical value
100% modulus (X-Y) ASTM D638 (ISO 527, GB/T 1040) 3.40 ± 0.42 (MPa)
Tensile strength (X-Y) ASTM D638 (ISO 527, GB/T 1040) 12.1 ± 0.82 (MPa)
Elongation at break (X-Y) ASTM D638 (ISO 527, GB/T 1040) 638.8 ± 15.5 (%)
Shore hardness ASTM D2240 (ISO 7619, GB/T 31) 90A

Note: Please refer to the TDS for the data with specimens printed with 1.20 extrusion
multiplier

Drying settings Diameter accuracy (2.85/1.75 mm): Weight accuracy:

70˚C for 12h 70% is within +/- 0.01 600g +/- 20g
97% is within +/- 0.02 750g +/- 20g
99% is within +/- 0.03 1000g +/- 30g
99.9% is within +/- 0.04 3000g +/- 60g

6
TOUGHNESS
Impact Strength
25kJ/m2 PolyMaxTM PC

PolyMideTM CoPA (wet)

PolyLiteTM ABS

PolyMaxTM PLA PolyLite™ ASA

PolyMaxTM PETG PolyMideTM CoPA (dry)

PolySmoothTM

PolyLiteTM PETG
PolyLiteTM PC
PolyLiteTM PLA
PolyWoodTM
STIFFNESS
Bending Strength

100MPa

Tensile Strength Vicat Softening Temp

66MPa
PolyMideTM CoPA (dry) PolyMideTM CoPA (dry)
180°C
PolyLiteTM PC

PolyMaxTM PC
160°C

140°C

PolyLiteTM PLA
120°C PolyMaxTM PC
PolyLite™ ASA PolyLiteTM PC
PolyLite™ ASA
PolySmoothTM PolyLiteTM ABS
100°C
PolyLiteTM PETG
PolyLite TM
ABS PolyMaxTM PETG
PolyMide CoPA (wet)
TM
80°C
PolySmoothTM
PolyLiteTM PETG
PolyMaxTM PETG PolyLiteTM PLA
PolyMax TM
PLA PolyMaxTM PLA
60°C PolyWoodTM
PolyWood TM

40°C

20°C

0°C

7
 Product Families

PolyLiteTM
ABS, PETG, PLA, PC, ASA
PolyLite™ is a family of 3D printing filaments made with the best raw materials to deliver
exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials
to meet your everyday needs in design and prototyping.

PolyMaxTM
PLA, PC, PETG, PC-FR
PolyMax™ is a family of advanced 3D printing filaments produced with Polymaker’s
Nano-reinforcement technology, to deliver exceptional mechanical properties and printing
quality.

PolyFlexTM
TPU90, TPU95, TPU95-HF
PolyFlex™ is a family of high-quality flexible materials. It provides the perfect solution for
applications where high flexibility and durability are required.

8
PolyMideTM
CoPA, PA6-CF, PA6-GF
PolyMide™ is a family of Nylon/polyamide based filaments. Produced with Polymaker’s
Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to
Nylon and ease of printing.

PolyDissolveTM
S1, S2
PolyDissolve™ is a family of dissolvable support filaments. This family offers support solu-
tion for our portfolio of filaments. It enables a greater design freedom.

Specialty
PolyWoodTM, PolySupportTM, PolySmoothTM, PolyCastTM
PolymakerTM PC-ABS, PolymakerTM PC-PBT
The Specialty family provides unique filaments from Polymaker to unlock new 3D printing
applications.

Hardware
Polysher™, PolyBox™
Polymaker offers 3D printing accessories to optimize the user experience with their
filaments.

9
 Technologies
Regular PLA With Jam-FreeTM

JAM-FREE™
Jam-Free™ technology improves the heat stability
of Polymaker’s PLA filaments with softening
temperatures over 140 °C. As a result, Polymaker’s
PLA filaments show minimal softening in the “cold
end” and can melt rapidly once entering the heating
zone, leading to excellent printing quality with zero
risk of nozzle jams.

WARP-FREE™
Regular Nylon With Warp-FreeTM
Warp-Free™ technology enables the production
of Nylon-based filaments that can be 3D printed
with excellent dimensional stability and near-zero
warpage. This is achieved by the fine control of
micro-structure and crystallization behavior of
Nylon, which enables the material to fully release the
internal stress before solidification.

Without Ash-FreeTM
Ash content: 0.5%

ASH-FREE™
Ash-Free™ technology allows Polymaker’s filament
which has been designed for investment casting With Ash-FreeTM
to burn off cleanly without any residue, enabling Ash content: 0.003%
defect-free metal parts. 3D printing has been used
to produce investment casting patterns as it cuts
down both the cost and lead time for small-volume
production runs.

10
 Rough surface With Layer-FreeTM

LAYER-FREE™
Layer-Free™ technology involves exposing a 3D
printed part to an aerosol of micro-sized alcohol
droplets, generated by a rapidly vibrating,
perforated membrane called the nebulizer. The
aerosol will then be adsorbed by the surface of the
3D printed part and render it smooth and layer-free.

NANO-REINFORCEMENT
Nano-reinforcement technology is applied to
produce filaments with excellent mechanical
properties and printing quality. It dramatically
improves the toughness of the material by increasing
its impact resistance.

Wood Stabilized FoamingTM

STABILIZED FOAMING™
Stabilized Foaming™ technology is used to produce
foamed filaments, whose foam structure can survive
the printing process and be inherited by the printed
parts. This enables light weight 3D printed parts with
unprecedented surface finish.

FIBER ADHESION™
Fiber Adhesion™ technology improves the layer
adhesion of fiber reinforced materials, by optimizing
the surface chemistry of the fibers to achieve better
dispersion and bonding to the matrix. This results
in better strength along the Z-axis and reduced
mechanical anisotropy.

11
 Hardware
Polymaker offers 3D printing accessories to optimize the user experience
with their filaments.

PolyBox™ PolysherTM
PolyBox™ is a dry storage The Polysher™ is a desktop post
box designed to provide the processing unit designed to remove
optimum environment for layer lines from PolySmooth™ and
3D printing filaments. The PolyCast™ prints. The Polysher™
PolyBox™ is compatible with all uses Polymaker’s Layer-Free™
3D printers and can house two technology to create a fine mist of
1kg spools or one 3kg spool. alcohol which evenly smooths the
model.

12
Monitor your prints from anywhere with

The Spaghetti Detective’s automatic failure detection can give added peace of
mind, help prevent messy failures, and keep your printer up and running longer.

Advantages
MANAGE CATCH PRINT MANAGE SAVE
PRINTING HAZARDS EQUIPMENT TIME &
REMOTELY EARLY DAMAGE RISK MONEY

Overview

Pause Cancel Pause Cancel Pause Cancel Pause Cancel

Scan to Learn More

thespaghettidetective.com/polymaker.html
Polymaker hereby declares that our company and the above-mentioned company are only for commercial
cooperation. There is no affiliation between Polymaker and the above-mentioned company, and Polymaker does
not act as an agent of the above-mentioned company.
 About Polymaker

Our Values

Customer Responsible Entrepreneurial Embracing

Oriented Innovation

Mission

Polymaker is committed to lowering the barriers to innovation and

manufacturing, by continuously developing advanced 3D printing
material technologies for industries and consumers.

14
Contact us

For any inquiries please contact:

[email protected]

For technical support please contact:

[email protected]

The information provided in this document is intended to serve as basic guidelines on

how particular product can be used. Users can adjust the printing conditions based on
their needs and actual situations. It is normal for the product to be used outside of the
recommended ranges of conditions. Each user is responsible for determining the safety,
lawfulness, technical suitability, and disposal/recycling practices of Polymaker materials
for the intended application. Polymaker makes no warranty of any kind, unless announced
separately, to the fitness for any particular use or application. Polymaker shall not be made
liable for any damage, injury or loss induced from the use of Polymaker materials in any
particular application

15