In supporting roles everywhere.

Rakks shelving and architectural specialties have been the choice of discerning
architects and interior design professionals for over 40 years.

Our Shelving systems consist of a family of fully compatible parts including

wall mounted standards, pole supports, shelf brackets and accessory
components. These component parts can be easily configured to meet a very
wide range of shelving and display applications. In both wall-mounted and
pole-supported configurations, Rakks features a classic modern design and
infinite adjustability without slots or visible hardware.

Rakks architectural specialties include mounting brackets for counters, sills,

vanities, benches and railings. Our System 700 Hand/Crash rail offers a
unique and attractive blend of aluminum and hardwood.

Please call us for additional specifications, samples or technical help. Our

experienced customer service personnel are eager to assist you.

Rakks. In Supporting roles everywhere.

CONTENTS:

Wall Mounted Standards................................1

Pole Supports................................................2-4

Shelf Support Brackets....................................5-7

L-Bracket Shelving System...............................8

Shelves.........................................................9

Counter Support Brackets...............................10-11

Handrail Products..........................................12

How to Specify..............................................13

1-800-826-6006 www.rakks.com
Rakks Wall Standards
W A L L S T A N D A R D S

WALL STANDARDS
.700”

Rakks Wall Standards are made of extruded aluminum with

.535”
precision channels that accept Rakks Shelf Support Brackets.
Standards are available in six profiles to meet a variety of surfaces C-STA ND A R D . Our most basic
extruded aluminum wall standard used
and recessed mounted applications. for either surface or recessed mounted
applications.

Standards can be specified in any length up to 12 feet. Standards

come with drilled and countersunk holes to accept color matched 1.750”

mounting screws (No. 6 x 1-1/4" Philip’s Flat-Head), which are .535”

included. When properly installed, screw heads are flush with the
M - S T A N D A R D . A decorative
back of the channel allowing shelf brackets to be positioned at profile used for surface mounted
any point. applications. The 1-3/4" wide profile
and flared sides make a dramatic
vertical statement.

Standards must be screwed into studs, blocking, or into wall

.700”
anchors sized for No. 6 screws. Toggler® Brand AF-6 and
SnapSkru wall anchors are recommended. Brackets should
TM
.625”

be mounted at least 6" from the top of the standard to better

1”
distribute the load. Shelf brackets can be mounted at the very
E - S T A N D A R D . An extruded
bottom of a standard. aluminum wall standard designed to be
recessed mounted between 5/8" drywall
panels. The front flanges cover the
rough-cut edge of the drywall.
.281”
SPECIFICATIONS
.4”
MATERIAL: SCREW HOLES:
6063-T6 extruded aluminum On center spacing is 12" typical
.250”
.25” 1.125”
LENGTH: HARDWARE: .535”

Available in lengths up to 12' No. 6 x 1-1/4" Philip’s Flat-Head color

matched screws are included 1.250”
FINISH:
RAKKS ARIA Clear anodized, black anodized, white powder- OPTIONS: G-STA ND A R D . Designed to be
coat. Custom anodized and Access slots when required mounted between 1/4" glass mirror or
Access slots (shown above)
are cut into the face of powder-coated finishes available Non-ferrous screws wood panels. The front flanges cover the
the standards (2” from Longer (2") screws panel edge.
CHANNELS:
bottom typical), allowing Wall anchors
9/32" opening accepts all styles of Rakks shelf
Rakks and Aria style
brackets to be inserted or support brackets
removedfrom the front. CAPACITY: 1.750”

Required in recessed Load capacities are determined by

applications, or when the .535”
bracket type and size (see pages 5-7)
ends of the standard are
not accessible.
D-STANDARD. Two channels allow
for independent adjustment of shelves
in both continuous and staggered
configurations.

MODEL DESCRIPTION APPLICATION

SC-XXX “C” Style Wall Standard Surface or recessed mounted 1.625”

SM-XXX “M” Style Wall Standard Surface mounted only

.625”
SE-XXX “E” Style Wall Standard Stud mounted to accept 5/8” wallboard
SG-XXX “G” Style Wall Standard Surface mounted over 1/4” mirror or panels
Q-STANDARD. A decorative profile
SD-XXX “D” Style Wall Standard Surface mounted – for maximum adjustment
designed for heavy-duty application.
SQ2-XXX “Q” Style Wall Standard Surface mounted – Heavy Duty With Rakks Style Support Brackets (BR
& TB) load capacities are increased by
Compatible with BR and TB brackets only 25%. Supplied with 2" screws and twin
XXX – Denotes length in inches. Specify finish clear anodized, black anodized, white powder-coat or custom. mounting holes at each end.

Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com
1
 Rakks Pole Supports
R A K K S P O L E S

PL WALL STORAGE POLE. Used to POLE SUPPORTS

1” create wall units with shelves and/or
cabinets in conjunction with a supporting Rakks support poles are made of extruded aluminum with
wall. Poles with spring loaded hardware
1.5” install under compression between the channels that accept Rakks Shelf Support Brackets. Poles
floor and ceiling. Front channels accept
shelf brackets; side channels accept 1/4-20 are available in five profiles to meet a wide range of storage
screws to mount cabinets.
and shelving applications. The infinite adjustability of shelf
brackets eliminates the need to level or shim poles. Anodized
aluminum finishes provide a clean and chemically resistant
1.5”
PC4 COMPRESSION SUPPORT finish.
POLE. Used to create shelving units with
or without a supporting wall. Adjustable
1.5”
mounts allow poles to be installed under
compression between floor and ceiling. 1/4-20
set screws
When used as a room divider, side
channels can accept 1/4" decorative
panels.
3.5”

1.5”
PC2 COMPRESSION SUPPORT
POLE. Similar to the PC4 pole with side
channels that accept 1/4-20 screws to attach
1.5”
L-Brackets and cabinets. Front and back C
channels accept all Rakks brackets and pole
accessories. Anchor Brackets are used
to secure poles to floor,
ceiling or to make pole-to-
pole connections.

1”

P S 4 S IN GLE SU P P O RT P O LE.
Used for floor-to-ceiling or through-counter
applications in laboratories and retail stores.
2”
Poles can also be used to create framing and
panel systems incorporating 1/4" decorative R A K K S P O L E C O N F I G U R A T I O N S
panels.

2” PD6 DOUBLE SUPPORT POLE.

Provides additional strength and versatility
and, similar to PC poles, can be installed
under compression. Double channels allow
2”
for independent support and adjustability
of shelves. Extra strength provides
maximum rigidity when used in integrated
applications.

THREADED INSERT. Used to create a

threaded channel in any pole. Facilitates the
installation of cabinets or other components OPTIONAL
TIE BRACKET
using 1/4-20 screws. Secures into pole
channel with set-screws.
A B C D

Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com
2
Rakks Pole Mounting Hardware
P O L E M O U N T I N G H A R D W A R E

POLE MOUNTING CONFIGURATIONS 1.625”

1-5/8” 1.125”
1-1/8”
SPRING COMPRESSION KIT. Used
with PL poles for installation between
A. Spring compression with supporting wall the floor and ceiling. 1-1/8" x 1-5/8" 11.5”
11-1/2”
(floor-to-ceiling) PL poles only. x 11-1/2" rectangular tube slides over
pole. Spring and spacers allow for up to
Note: loads must be rear facing against wall. 4" overall adjustment. Rubber top and
bottom pads protect ceiling and floor.
B. Threaded compression with or without supporting Note: poles should be cut 3" shorter than
the finished floor-to-ceiling height.
wall (floor-to-ceiling).
Note: loads must be balanced or mounts must be fastened at ceiling.

C. Tied back to a supporting wall with tie-bracket. THREADED MOUNTS. Install into
Note: length of tie-bracket must equal shelf depth. inserts at the top and bottom of PC2,
PC4 and PD6 poles for installation
between floor and ceiling. These non-
D. Integrated into counter or laboratory casework. skid, non-marking mounts allow for up
Note: maximum recommended shelf height is 42" above counter. to 2” overall adjustment.
Note: poles should be cut 3” shorter than 2” 1.70”
the finished floor-to-ceiling height.
E. Secured by anchor brackets and screws (floor-to-ceiling).

F. L-brackets tied to a supporting wall with mitered tie .7”

pole and anchor brackets. ANCHOR BRACKETS. One leg of

2”
these L-shaped brackets slides into the
pole channel and is secured with 1/4-20
G. Rakks brackets tied back to a supporting wall with set screws. The other leg can be used to 2”
.7”
anchor poles to the floor, ceiling or wall.
mitered tie-pole and anchor brackets. Use two AB-0035 brackets for pole-to-
3.5”
ceiling connections. AB-0202 brackets .25”
Threaded mounts are can be used to make 90-degree pole-to-
drilled so that they can pole connections. 3.5”
be easily screwed into the
ceiling.

MITERED TIE-POLE. Used to secure

poles to a wall. Mitered tie-poles are
AB-PC4C
AB-PC OR AB-PL
available in any specified length. AB-
0202 brackets are used for pole-to-pole
R A K K S P O L E C O N F I G U R A T I O N S connections. AB-PC or AB-PL brackets AB-0202
AB-0202
provide an attractive connection back to
the wall.
Note: if shelves do not touch the wall,
additional bracing may be required to
prevent side-to-side racking.

TIE-BRACKET. Used to secure any

Rakks pole to a wall. Tie-brackets have 1”
a PVC flange at the end that is screwed
to the wall. One tie-bracket should be
located at the top of the pole. Additional
tie-brackets can be added for greater
stability.

Note: tie-brackets must be specified so that

shelves touch the wall.

OPTIONAL GROMMETS. Facilitate installation of

TIE BRACKET PS4 and PD6 poles in through-counter
OR TIE POLE installations. These machined Delrin
inserts are epoxied into round holes cut
into counter tops. Eliminates need to cut
E F G square or rectangular holes. 2.5” 3.5”

Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com
3
 Rakks Pole Components
P O L E C O M P O N E N T S

POLE COMPONENTS
SPLINE CONNECTOR. Join sections
of poles when floor-to-ceiling heights
exceed inventoried lengths. Splines slide
Rakks Pole Components expand and enhance the configuration
4”
into pole channels and are secured using options of our pole-supported systems. Using anchor brackets,
four set screws. Two splines required for
each connection. spline connectors, and channel nuts, poles can be joined or
supported in an infinite variety of combinations. Custom
structures and displays can be easily created using readily
.25”
available components
CHANNEL NUT PLATES. Used for
.125” mounting accessories to poles. NP-0832
nut plate can be easily installed or removed
1.25”
from the front of the pole. NP-0420 nut
plate must slide into the end of the pole MODEL DESCRIPTION LENGTHS CONFIGURATION
.5”
or into an access slot and should be used PC2-XXX Compression pole for L-bracket Up to 12’ Floor-to-ceiling B, C, E, F, G
where a more secure attachment is required.
PC4-XXX Compression support pole Up to 12’ Floor-to-ceiling B, C, E, G
1”
PS4-XXX Single support pole Up to 12’ Floor-to-ceiling C, D, E, G

PD6-XXX Double support pole Up to 16’ Floor-to-ceiling B, C, D, E, G

PL-408/PL-409 Wall storage support pole Up to 11’ Floor-to-ceiling A, C, F, G

with 2’ extension
PANEL FRAMING CHANNELS.
Used with Rakks poles to support and frame Poles are stocked in clear and black anodized finishes.
1/4" decorative panels. Framing channels PC2, PC4 and PL poles are also stocked in white powder-coat. XXX – denotes length in inches.
are manufactured to order to fit any panel
width up to 4’. They lock securely into the MODEL DESCRIPTION APPLICATION SPECIFICATION
pole and are held in place by channel nut
plates. PL-HDW Spring Compression Kit PL pole floor-to-ceiling Finish to match PL poles

Note: panels should be 3/4" wider than inside PM-PC16 Mount and Insert PC2/PC4 Threaded compression Black or clear 3” stem
pole-to-pole dimensions.
PM-PD13 Mount and Insert Threaded compression for PD6 Black nylon only 3-1/2” stem

AB-0202 Anchor Bracket 2” x 2” Pole-to-pole connections 2 tapped holes

AB-0035 Anchor Bracket 3-1/2” x 3-1/2” Pole-to-ceiling connections 2 tapped & 2 through holes

DOOR HINGES. Pole mounted door AB-PC Tie-Pole to Wall Bracket 1-1/2” x 1” Decorative bracket for PC2/PC4 1 tapped & 1 through hole
hinges can accommodate 1/4" glass and AB-PL Tie-Pole to Wall Bracket 1-1/2” x 1-1/8” Decorative bracket for PL/PS4 1 tapped & 1 through hole
3/4" wood doors up to 18" wide. Hinges
can be configured for single or double MT-XXX Mitered Tie-Pole Pole-to-wall connection Profile & length as specified
door applications. Available in polished
BT-XXX Tie Bracket 1-1/4” Pole-to-wall connection Length & finish as specified
aluminum only.
BT2-XX Tie Bracket 2” Pole-to-wall connection Length & finish as specified

PG-PS4 Grommet for PS4 Pole - Black Integrated configuration (Type D) Fits 2-1/2” diameter hole

PG-PD6 Grommet for PD6 Pole - Black Integrated configuration (Type D) Fits 3-1/2” diameter hole

CHANNEL COVERS. PVC extrusion SP-001 Spline Connector Joins poles end-to-end Use 2 per pole
snaps into pole channels to cover opening SP-PC4 Spline Connector for PC4 Joins PC4 pole end-to-end Use 2 per pole
for improved sanitation and cleaning.
Available in 8’ lengths in translucent and NP-0832 Channel Nut w/ 8-32 screw Installs from the front of pole Steel w/ 1 tapped hole
black PVC.
NP-0420 Channel Nut w/1/4-20 screw Installs from the end of pole Steel w/ 1 tapped hole

PET-XXX Threaded Insert Installs into poles channels Lengths up to 8’

PC-SC-XXX Panel Framing Channel Kit Supports panels between poles Length as specified

PH-G25 Hinge Kit for 1/4” glass doors Attach glass doors to poles Single or double
POLE CORNER ADAPTER. This
adapter screws into the side of PL or PC2 PH-W75 Hinge Kit for 3/4” wood doors Attach wood doors to poles Single or double
poles and accepts a shelf bracket. It should
CC-096 Channel Cover 96” Covers open channel Black or transluscent
be used only in corner conditions.
PL-BA Bracket Adapter Corner condition PL or PC2 Finish to match poles

LB-025 Lamp Bracket for 1/2” Stem Attach lamp to poles or standards Clear or black anodized

EC-0102 End Cap for PS4 Pole Covers end of pole Black only

LAMP BRACKET. Accepts drafting EC-0202 End Cover for PD6 Pole Covers end of pole Black only
lamps with 1/2" diameter bottom shaft.
PF-00B Bottom Pad for PL Pole Protects floor / covers end Black, white, or gray
Available in black or clear anodized
aluminum. PF-00T Top Pad for PL-HDW Protects ceiling Black, white, or gray

Note: Contact Rakks Customer Service for additional information and specifications.
XXX denotes length in inches.

Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com
4
 Rakks Shelf Supporting Brackets
B R A C K E T S

SHELF SUPPORT BRACKETS

Manufactured from extruded aluminum and available in
attractive anodized finishes, Rakks shelf support brackets feature RAKKS STYLE. Our signature Rakks
1.25”
infinite adjustability and attach to standards and poles supports Style bracket features a distinctive
rectangular bar design that can support
without slots or visible hardware. Available in five basic styles, shelves up to 24" deep. Rakks Style
0.25”
brackets are designed to “underhang”
Rakks, Universal, Aria, Tray, and Floating brackets have a the shelf (see chart for useable length).
These brackets can be specified and
distinctive look and reflect a functional design. Aria brackets are made to order in ANY useable length up
2”

stocked in clear and black anodized aluminum. All other brackets to 24". Depending on length and load
capacities, brackets are manufactured in
are stocked in clear anodized, black anodized and white powder- 1-1/4" and 2" heights. 0.25”

coat finish.

T-STYLE T-STYLE LAB

The patented Rakks
locking system allows for
the precise location of RAKKS T-STYLE. T-style brackets 1”
shelves at any height. have a PVC shelf coupler extrusion
that is pinned to the top of the bracket
creating a 1" wide horizontal support
1.38”
surface. The horizontal surface is pre-
drilled with holes allowing shelves to be
screwed to the bracket. Any Rakks Style
bracket can be supplied in the T-style.
PVC extrusion is available in white, 1”
black or translucent.

Universal Brackets insert RAKKS T-STYLE LAB BRACKET. A

into Standards or Poles, heavy duty tapered bracket with PVC 2.13”
turn and lock into place. flange. Available in one size only for shelf
depths from 11"-14".

MODEL DESCRIPTION USEABLE WIDTH DEPTH LOAD BU-009 BU-012

LENGTH CAPACITY
UNIVERSAL. This tapered aluminum
1”
BR-004 Rakks Style for 4” Shelf 3-1/4” 1/4” 1-1/4” 100# bracket is available in two sizes to
support wood or glass shelves from 9"
BR-006 Rakks Style for 6” Shelf 5-1/4” 1/4” 1-1/4” 100#
to 14" deep. The 1" horizontal surface is
predrilled with holes allowing shelves to 2”
BR-008 Rakks Style for 8” Shelf 7-1/4” 1/4” 1-1/4” 100#
be screwed to the bracket.
BR-010 Rakks Style for 10” Shelf 9-1/4” 1/4” 1-1/4” 75#
BR2-10 Heavy Duty for 10” Shelf 9-1/4” 1/4” 2” 100#
BR-012 Rakks Style for 12” Shelf 11-1/4” 1/4” 1-1/4” 60#
GLASS SHELF
BR2-12 Heavy Duty for 12” Shelf 11-1/4” 1/4” 2” 100# 5” HOLD-DOWN SOLD
SEPERATELY
TB212-LAB T-style Lab Bracket 11” 1” 2-1/8” 100#
BR-014 Rakks Style for 14” Shelf 13-1/4” 1/4” 1-1/4” 55# 1.375”
BA-002
BR2-14 Heavy Duty for 14” Shelf 13-1/4” 1/4” 2” 85# BA-001

BR-016 Rakks Style for 16” Shelf 15-1/4” 1/4” 1-1/4” 50#
ARIA DISPLAY BRACKET. A two
BR2-16 Heavy Duty for 16” Shelf 15-1/4” 1/4” 2” 80# piece bracket that can support glass or
BR2-18 Rakks Style for 18” Shelf 17-1/4” 1/4” 2” 70# wood shelves of various thicknesses
up to 12" deep. This elegant display
BR2-24 Rakks Style for 24” Shelf 22-1/2” 1/4” 2” 45# comes in two configurations, one with
matching top and bottom, the other
TB-XXX T Option for BR Bracket as above 1” 1-3/8” as above
using a hold-down bracket on the top.
TB2-XX T Option for BR2 Bracket as above 1” 2-1/8” as above Available in clear and black anodized
aluminum with color matched set
Load capacities represent a uniformly distributed, static load, per bracket. Spacing of brackets should take into screws.
consideration both anticipated loads and shelf deflection characteristics.

Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com
5
 Rakks Shelf Support Brackets
A C C E S S O R I E S

SHELF SUPPORT BRACKETS

1.125”
Rakks Shelf Support brackets can be used for a wide range of
.625” .625” TRAY BRACKET. A minimal profile, applications. Our signature Rakks Style bracket combines
.25” medium-duty support for shelves from 6"
to 12" deep. Left, right and center brackets elegant design with exceptional flexibility and versatility. They
support shelves from the ends. When used
.875” with 1" thick shelves they create a near can be used to support shelves from 4” to 24” deep and when
"floating" appearance.
1”
specified in the heavy duty configuration are a perfect choice for
oversized books, laboratory equipment, catalogs or heavy files.
Universal Brackets feature a functional easy-to-use design for
medium-duty storage, including books. Aria, Floating, and Tray
.25”
FLOATING DISPLAY BRACKET. brackets have a distinctive look for light to medium-duty display
Fits into pre-cut channel of shelf to give and merchandising applications.
a "floating" appearance with no visible
hardware. Used for light-duty display
.5” applications with 4" to 12" deep wood or
acrylic shelves.

RETAINING PIN OPTION. Rakks

brackets with retaining pins provide an
extra measure of security, keeping shelves
from shifting on the brackets. Wood
shelves with 1/4" holes or slots fit over the
pins. When supporting long shelves across
several brackets, only the outside brackets
need retaining pins. Double-sided foam
tape is also effective in securing shelves to
the brackets.
J-Hangbar Bolt
on Bracket.

BR BOOKEND. Rakks Style brackets

make excellent bookends. Specify bookends MODEL DESCRIPTION USEABLE WIDTH DEPTH LOAD
one size smaller than the shelf depth. LENGTH CAPACITY
Note: bookends must be installed in sequence BU-009 Universal Bracket for 9” - 11” Shelf 9” 1” 2” 70#
with (and at the same time as) the shelf
brackets. BU-012 Universal Bracket for 12” - 14” Shelf 11-3/4” 1” 2” 60#

UNIVERSAL BOOKEND. A wire BA-001 Aria Display Bracket for 5” - 12” Shelf 5” 3/4” 2-3/4” 50#
8”
formed bookend that can be installed into + ST
the front of standards or poles at any point.
Powder coated silver, black, and white to BA-002 Aria Display Bracket w/ Hold Down 5” 3/4” 1-5/8” 50#
match other components. Available in 8" + ST
depth only.
BR-GH1 Glass Hold Down only 7/8” 3/4” 1/4” n/a

BTR-L-XX Tray Bracket Left 6-1/8” to 12-1/8” 5/8” 1-1/8” 45#

in 2” increments

1” SHELF COUPLER. Used with Rakks BTR-R-XX Tray Bracket Right 6-1/8” to 12-1/8” 5/8” 1-1/8” 45#
2” Style brackets to allow two shelves to join in 2” increments
at a bracket. Couplers (two per bracket)
are only required on the bracket where the BTR-C-XX Tray Bracket Center 6-1/8” to 12-1/8” 5/8” 1-1/8” 45#
two shelves join. Pre-drilled holes in the in 2” increments
couplers allow the shelves to be screwed
into place. Available in white, black and BF-04 Floating Display Bracket for 4” Shelf 3-1/2” 1/4” 1/2” 25#
translucent.
BF-06 Floating Bracket for 6” Shelf 5” 1/4” 1/2” 25#

BF-08 Floating Display Bracket for 8” Shelf 7” 1/4” 1/2” 25#

BF-10 Floating Display Bracket for 10”-12” Shelf 9” 1/4” 1/2” 20#
S HE L F REST S. These transparent
polyurethane pads cushion glass or
BL-XX L-Bracket - see page 8 for complete specifications
wood shelves and keep them from
sliding on the brackets.
.3” Load capacities represent a uniformly distributed, static load, per bracket. Spacing of brackets should take into
consideration both anticipated loads and shelf deflection characteristics. ST = Shelf Thickness

Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com
6
 Rakks Shelf Support Brackets
C U S T O M B R A C K E T S

SHELF SUPPORT BRACKETS HANGBAR. Sold in cut-to-length .25”

sizes up to 12 feet, this 1-1/4" x 1/4"

Rakks shelving can be configured and accessorized to clear anodized bar fits into notched
brackets. Bracket length and notch 1.25”
satisfy the most demanding merchandising and storage location made as specified.

applications. Face-outs, hangbars, slanted displays, notched

brackets, and waterfalls can be manufactured to your exact .75”
J-HANGBAR. This attractive profile
specifications. Our metal fabrication and machining capability provides extra stiffness for wide spans or
heavy clothing. Can be mounted at the 1.5”
allow for quick turn-around and reasonable costs. end of notched BR2 bracket (shown) or
2”

supported on J-Bar Brackets described

below.

.25”
J-BOLT-ON BRACKET. Used to
attach J-hangbar to poles. The bolt-
1.5”
on bracket screws to the side of PL
or PC2 poles. Available for left and
right configurations. BOLT-ON

8”
WIRE FACE OUT BRACKET. Fits
over BR-Hangbar and can be used for
the merchandising and point display of
card mounted product. Available in one
size, 8" silver powder coat only.

1.25”

FACE OUT. Used for merchandising or

display, Rakks brackets with retaining
MODEL DESCRIPTION APPLICATION SPECIFICATION pins make excellent face-outs.

BR-RP Retaining Pin Option Secures shelves to bracket 5/32” pin extends 1/4”
for Rakks Brackets
BR-NOTCHED Notched Option Accepts hangbar, Depth and location NOTCHED BRACKET SHELF
for Rakks Brackets stiffener or shelf lip as specified STIFFENER. Provides additional
BR-SLANTED Slanted Option Display literature Length and angle support under wood or glass shelves
for Rakks Bracket or product as specified to accommodate wide spans or control
shelf deflection. A 1-1/4" x 1/4" clear
BR-HANGBAR 1-1/4” X 1/4” Hangbar or shelf stiffener Lengths up to 144” anodized bar fits into notched brackets.
Rectangular Bar Stock Bracket length and notch location made
BR2-HANGBAR 2” X 1/4” Shelf lip Lengths up to 144” as specified.
Rectangular Bar Stock
BJ-HANGBAR J-Hangbar Hanging rod for 1-1/2” x 3/4”
merchandising or closet lengths up to 144” SLANTED BRACKET. Rakks style
BJ-BB J-Hangbar Bracket Attach J-Hangbar to sides 1-1/2” x 1-1/2” x 1/4” brackets can be made to lock in at any
Bolt-On of PL or PC2 pole w/ 2 holes angle (up or down). Retaining pin at end
keeps wood shelves in place. When used
BJ-OL & J-Hangbar Offset Attach to front of pole 1-3/8” offset with glass or aluminum shelves, brackets
BJ-OR Bracket left/right left/right side can be notched at end to accept 2" x 1/4"
BJ-0C or center “T” BJ-0C attaches to front of shelf lip bar.
pole where sections join

BR-WATERFALL Waterfall option Merchandising and display Specify length, angle

for Rakks Bracket & pin location WATERFALL BRACKET. Used for
BP-008 Universal Wire Bookend installs from Powder-coated steel to match merchandising and display, brackets
Bookend - 8” front of standard can be made to any specified length,
angle and pin configuration.
TB2-18C-DESK Reinforced Bracket for Extra support for 20” - 24” 18” bracket can
worksurface worksurface support 120#
TU-201 PVC Shelf Coupler Use 2 per bracket 1” flange. Drilled for
18”
where shelves join #6 screws DESK BRACKET. Used to support 18”
work-surfaces from 20" - 24" deep –
BMP-1 Stick-On Shelf Rest Cushion shelves and Use 2 or more per bracket these T-style brackets are reinforced 12.5”
keep them from sliding for added strength. Rated at 120# per
Most brackets are stocked in clear anodized, black anodized and white powder-coated finishes. bracket.
Hangbars are stocked in clear anodized only. Custom finishes are available for all parts.

Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com
7
 Rakks L-Bracket Shelving System
L - B R A C K E T S

L-BRACKETS
PC2 SUPPORT POLE. Threaded
side channels accept 1/4-20 screws that are
1.5”
used to mount L-Brackets and/or cabinets to
Rakks L-Bracket system (pat. pend.) provides unparalleled design
poles. Front and back C channels accept all flexibility, strength and value. Available in both floor-to-ceiling
other Rakks brackets and pole accessories.
1.5” PC2 poles can be installed between the floor and wall-supported configurations this new design features quick
and ceiling under compression or tied back
to the wall. See pages 2-3 for additional and infinite shelf adjustment utilizing one hidden screw. Brackets
information.
support wood, glass, or aluminum shelves from 8” to 24” deep in
2-inch increments. Cabinets can be easily attached to the poles to
create attractive wall storage units or merchandising displays.

.19”
L-BRACKET. L-Brackets attach to
PC2 poles at any height with one 1/4-20
screw. When used with 3⁄4" thick shelves
1.375” the mounting hardware is hidden. Wood
shelves can be screwed to the brackets using
pre-drilled and countersunk holes.
Note: shelves should be cut 1/2" shorter than
.937” the inside pole-to-pole opening.

L-BRACKET WITH RETAINING PIN. SPECIFICATIONS

L-Brackets can be ordered with retaining
pins on each end to hold Rakks extruded
aluminum shelves securely in place. SIZE: MATERIAL:
Poles: 1-1 /2” square in lengths up 6063-T6 extruded aluminum
to 144”
FINISH:
Brackets: in lengths from 8”-24” in
Clear, black anodized, white powder-coat
2-inch increments
CAPACITY:
HOLES:
Custom L Bracket pg. 8 TIE -POLE. Mitered tie-poles
MITERED One 9/32” hole is predrilled and
150 pounds per pair. All depths
AB-PC
AB-PC4C
can be used in applications where floor to countersunk to accept a 1/4-20 x 1/2” flat OPTIONS:
ceiling installation is not practical or desired. head screw - included. Supporting lip has Retaining pins, custom lengths,
AB-0202
AB-0202 Pole-to-pole and pole-to-wall connections two holes drilled and countersunk for #6 angles, configurations
are made using anchor brackets secured L-Brackets screw
screws used to secure wood shelves to
with setscrews. Tie-pole kits are sized to to poles at any height.
accommodate all L-Bracket sizes. brackets

MODEL DESCRIPTION APPLICATION SPECIFICATION

PC2-XXX PC2 Support Pole Floor to ceiling or tied back to wall Lengths up to 144”

BL-XX L-Bracket Shelf Support Supports shelves 8” - 24” deep Rated load is 150# per pair

PC2-MT-XX Mitered Tie-Pole Kit Anchors PC2 pole to wall Lengths = shelf depth plus 1-1/2”

C U S T O M L - B R A C K E T . Custom BL-RP Retaining Pin Option Secures aluminum shelf to bracket 5/32” steel pins located at each end
L-Brackets can be manufactured in a variety
of lengths and asymmetric configurations. BL-SLANTED Slanted Option Merchandising or display Length and angle
Slanted brackets are ideal for merchandising for L-Bracket as specified
and display. Offset brackets can be used to
support worksurfaces or shelves of different BL-OFFSET Offset Option Supports varying shelf depths Length and offset
depths. for L-Bracket as specified

CAB-HDW Mounting Hardware Attaches cabinets to poles 1/4-20 screws 3/8”

+ thickness of side

BMP-1 Stick-on Shelf Rests Cushion shelves and keep Use two or more per bracket
them from sliding

Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com
8
Rakks Shelves
E X T R U D E D A L U M I N U M S H E L V E S

EXTRUDED ALUMINUM SHELVES SA-04/SA-06 ALUMINUM SHELF.

4”

This 4" and/or 6" extruded shelf can be

SA-04
Rakks aluminum shelves have an attractive low-profile with supported on Rakks Style (BR-004/BR-
006) shelf brackets or used in combination 6”

strength that exceeds 3/4” plywood. Shelf depths of 4” to with other shelf sections to make 8" up to
18" deep shelves. SA-06
18” in two-inch increments can be achieved by combining 4”
and 6” deep sections and can be ordered in specified lengths
up to 12’. Shelves feature a textured top surface which hides SAF-06 ALUMINUM SHELF FILLER.
This 6" filler is used to configure shelf
scratches and assures a uniform appearance. depths requiring three sections. Vertical
front and back faces line up with and join 6”
the SA-04 or SA-06 sections to create 14",
S H E L F C O M B I N A T I O N S 16" or 18" deep shelves. Double-sided tape
is provided to keep shelf sections aligned.

8” (4”+4”) 14” (4”+6”+4”)

10” (6”+4”) 16” (6”+6”+4”)

SA-END SHELF ENDS. A decorative
aluminum cap that fits securely to the end
12” (6”+6”) 18” (6”+6”+6”)
of Rakks extruded aluminum shelves.
Shelf End attaches to shelf with set screws.
COMBINE SHELVES FOR DESIRED SIZE. Provides a finished end and protects the
Extruded sections are combined to create shelves depths up to 18”. shelf ends in high traffic areas.

SPECIFICATIONS SLIDING BOOKENDS. These adjustable

bookends integrate into the base of the 8.75”
aluminum shelves and can be secured at any
MATERIAL: SA-04 1/4” deflection @ 60#
SA-06 1/4” deflection @ 90# point along the shelf with a thumbscrew. Use
6063-T6 extruded aluminum with surface mounted standards or with pole
SAF-06 1/4” deflection @ 90#
LENGTH: Note: shelf capacities are cumulative. A
applications having clearance at the back of
Shelves are custom cut and deburred at the shelf. Sliding bookends are available in
10” deep shelf can support 150# with one size, 8-3/4".
the factory in any length up to 144” 1/4” deflection
THICKNESS: WEIGHTS:
0.585” SA-04 0.60 #/ft
FINISH: SA-06 0.91 #/ft SHELF LIP BRACKET. This Rakks Style
Stocked in Clear anodized aluminum SAF-06 1.02 #/ft bracket allows aluminum shelves to be used
Available in custom finishes for literature and other product display in
TAPE: a slante configuration. 2" shelf lip bar
1.375”
2”
.6250”
CAPACITY: 3M™ VHB 4930 double sided tape secured in the notched brackets retains the
Deflection, based on a uniform load 7/16” x 2” is provided to keep shelf shelf and creates an attractive lip. Available
across a 36” span sections aligned in any angle and all shelf depths.

SHELF HOLD-DOWN CLIP. Used

RAKKS SUSPENDED WOOD SHELVING to secure shelves to brackets so that they
cannot be easily removed. Recommended
Rakks “Suspended Bracket” is exceptionally strong with low for light-weight applications where shelves
.875”
might slide side-to-side. Clip attaches to
profile support for ¾” wood shelves up to 12” deep. Call for shelves and bracket with setscrews. Model
SA-HLD.
further specifications.
SHELF SPLINE. Used to join shelf sections
RAKKS SUSPENDED ALUMINUM SHELVING end-to-end to create a continuous shelf
in excess of 12’. Aluminum spline fits
securely into shelf bottom keeping shelves in
Rakks Suspended Aluminum Shelving is the ideal choice for alignment. Model SA-SP1.
5”

adding a modern decorative accent to any space. The sleek Note: shelves must always join at a bracket.

profile brings an architectural element to any display. Please

LABEL HOLDER. Attaches to the front
call for further specifications. edge of SA-06 and SA-04 aluminum shelves
using a hidden thumbscrew. Holds 1/2" .5”
tall labels. Lengths as specified. Model SA-
LBL.

Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com
9
 Rakks Counter Support Brackets
C O U N T E R S U P P O R T B R A C K E T S
COUNTER SUPPORT BRACKETS

9”
EH-1209. Used to support counters up to Rakks Counter Support Brackets keep work areas open and
13" deep or incorporated into casework to
12” provide structural bracing. These brackets accessible. They provide heavy duty support for counters up
provide a modern looking alternative to
wooden corbels. to 30” deep while improving the handicapped accessibility and
2” 2” ergonomics of the work area. Available in a range of sizes,
finishes and configurations Rakks counter support brackets are
manufactured from easy-to-recycle structural aluminum.
12”

EH-1212. Used to support counters up

to 18" deep or incorporated into casework
12”
to provide structural bracing. Bracket can
be easily cut in the field to accommodate
shorter counters.
2” 2”

18”

EH-1818. Used to support counters up

18”
to 25" deep, brackets should be screwed
into blocking or stud at a maximum spacing
of 48". 2" wide mounting surface provides
extra support where counter sections join.
2” 2”

SPECIFICATIONS - COUNTER SUPPORTS

Counter sections join at
MATERIAL: HARDWARE: bracket.
6063 T-6 extruded aluminum 5/16” holes accept 1/4” screws

24” FINISH: INSTALLATION:

EH-1824. Used to support counters up Stocked in mill (unfinished) aluminum, 48” maximum spacing into studs or
to 30" deep. These light-weight and easy-
off-white powder-coat, primed or clear blocking or as specified by counter top
to-ship brackets are manufactured from 2"
18” x 3" "T" to provide maximum stiffness. anodized finishes supplier
1.25”
When the 24" leg is against the wall, this CONSTRUCTION: OPTIONS:
bracket can also be used to support 24" Formed back and TIG welded Flush Mount configuration
2” 2” deep counters. 2”
along both 45º mitered sides Grommet
EH-1818 and all flush mounted Custom sizes and finishes Typical hole locations.
brackets are welded across the back. All Faceplate cover
sharp edges ground and deburred

1.25”
8.625”
1.25” 1”

5”
EC-0808 / EC-0812. Used to support
8.625” counters up to 12 inches and 18 inches MODEL HEIGHT DEPTH MATERIAL GAUGE CAPACITY APPLICATION
deep. Modern design and easy to install
11.625” without visible hardware. If your counter EH-1209 12” 9” 2” x 2” T 3/16” Top 650 lbs/Bracket 13” Counters
1”
has been installed, you can use our optional 1/4” Web
8.625”
5” Face-plate Mounting Kit. Available in clear,
black or bronze. EH-1212 12” 12” 2” x 2” T 3/16” Top 650 lbs/Bracket 18” Counters

1/4” Web

EH-1818 18” 18” 2” x 2” T 1/4” 450 lbs/Bracket 24” Counters

EH-1824 18” 24” 2” x 3” T 3/16” 450 lbs/Bracket 30” Counters

2”

EC-0808 8-5/8” 8-5/8” 1-1/4” Hollow 1/8” 125 lbs/Bracket 12” Counters
2”

EC-MP. The optional Face plate mounting EC-0812 8-5/8” 12-5/8” 1-1/4” Hollow 1/8” 100 lbs/Bracket 18” Counters
kit allows you to screw the bracket to the
8-5/8”

8.625”
wall using #8 x 2 inch color matched screws. EC-MP 8-5/8” 2” Aluminum Bar 1/4” 100-125 lbs/Bracket 12”-18” Counters

Capacities represent a uniformly distributed, static load, per bracket.

Spacing of brackets should take into consideration anticipated loads and counter top material.

Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com
10
 Rakks Counter Support Brackets
S P E C I A L T Y B R A C K E T S

COUNTER SUPPORT BRACKETS

3.25” 3.25”

Rakks counter support brackets provide a strong and easy-to- 3.75” 3.75”

install alternative to full-height laminated panels. In the surface

mounted configurations brackets are screwed into the finished
wall. In the flush-mounted configurations, the vertical leg is FLUSH MOUNT. For applications
requiring nearly invisible support, these
screwed to the side of the stud and hidden behind the drywall. brackets use an L-shaped vertical leg
that is screwed to the side of the stud.
Stocked in mill (unfinished) aluminum, off-white powder-coat, After installation of the bracket, drywall
is installed around the bracket hiding the
primed, black powder-coat and clear anodized aluminum, Rakks vertical support. Aluminum faceplates
Counter Brackets are available for immediate shipment. with adhesive backing create a finished
installation.

15.75”

BENCH MOUNT. Used for seating

applications incorporating 5" wooden
planking. The supporting arm is 14.25”
pre-drilled with 12 holes to provide
secure installation. Manufactured from
2" x 3" T to provide maximum stiffness.

3”

CUSTOM EH BRACKET. Used

in applications requiring an angled
surface, any EH bracket can be ordered
in the slant mount configuration. Please
specify size and angle.

Flush mounted
bracket mounts
to the right side
of the stud.
VANITY BRACKET. Vanity brackets
are fabricated in a standard sixe of 18” x
21-1/2”. Also offered in a custom made-
to-order brackets support sinks and
provide a stable mounting surface for 3”
MODEL HEIGHT DEPTH MATERIAL GAUGE CAPACITY APPLICATION custom-built enclosures. Wooden strips
on the front faces of the bracket provide 18”
EH-1209-FM 12” 11” 2” x 2” T & 1/4” 430 lbs/Bracket Flush Mount a convenient mounting surface for
2” x 2” L laminated or solid surface panels. Meets
ADA requirements.
EH-1212-FM 12” 14” 2” x 2” T & 1/4” 430 lbs/Bracket Flush Mount
2” x 2” L

EH-1818-FM 18” 20” 2” x 2” T & 1/4” 300 lbs/Bracket Flush Mount

2” x 2” L GROMMET OPTION. Used for
under-counter wire management. Rubber
EH-1824-FM 18” 26” 2” x 3” T & 3/16” 300 lbs/Bracket Flush Mount grommet with 5/8” diameter opening
.625”

2” x 2” L 1/4” can accommodate an RJ-45 connector

or wire ties.
EH1416B 14.25” 15.75” 2” x 3” T 3/16” 450 lbs/Bracket Bench Seating
FB-0404 3-1/2” 3-1/2” 6061 Aluminum 1/4” 120 lbs/Bracket 5” Sills

FB-0406 4” 6” 6061 Aluminum 3/8” 150 lbs/Bracket 10” Sills

3.5” .875”

MODEL DESCRIPTION APPLICATION SPECIFICATION SILL SUPPORTS. Manufactured

from structural aluminum angle, these 3.5”
EH-FP22/FP23 Stick-on Face-plate Cover To finish drywall For 2x2 and 2x3 brackets can be used anywhere low-
profile support or bracing is required.
EH-SLANTED Slanted Option Work areas Length and Available in two sizes: 6” .875”

for Counter Support angle as specified

FB-0404: 3-1/2” x 3-1/2” and
4”
EH-VANITY Stocked & Make to Order Sizes Wall mounted sinks As Specified FB-0406: 4” x 6”

EH-PG Grommet Option Wire management 5/8” diameter opening

Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com
11
 Rakks Handrail Products
R A K K S H A N D R A I L S Y S T E M

HANDRAIL SYSTEMS

SYSTEM 700. This 7” handrail Rakks Handrail System 700 beautifully combines the
system meets or exceeds all major building
1.5”
codes as well as ADA requirements for strength and economy of extruded aluminum with solid wood
handrails. Solid wood trim offers a secure
7” and ergonomic gripping surface. Extruded components to provide a sturdy, attractive, and cost effective
aluminum body provides maximum
strength to protect walls from carts and
solution for handrail and crashrail applications. Expertly
other damage. sanded and finished hardwood components, including inside
and outside corners, and ends create an ergonomic design.
1.25”

Wood components and trim are available in oak, maple, cherry,

and mahogany in either clear or stained finishes. The aluminum
railing body is available in clear and black anodized aluminum
1.25”
SYSTEM 700 CORNERS AND or in custom powder-coated and anodized finishes.
COVER CAP. This beautifully sanded
.375”
and finished solid wood component is held A two-piece mounting bracket allows for easy installation and
securely in place with 1/8”steel pins. It can
be used to make inside corners, outside
removal. Mounting brackets also function as splines— allowing
corners and return-to-wall end caps. As an multiple pieces to be joined for long runs.
7”
outside corner or end, it protects walls from
carts and other damage.

HANDRAIL MOUNTING BRACKETS

Rakks Handrail Mounting Brackets consist of two heavy gauge

R A KK S H A N D R A I L B R A C K E T S
aluminum parts; one is attached to the wall and the other
to the handrail prior to installation. The unique design of this
bracket system compensates for a wide margin of installation
HR-303 HANDRAIL MOUNTING error and wall irregularities. Slots, in perpendicular axes to
BRACKET. Manufactured from #380
cast aluminum alloy, this two-piece bracket each other, provide an automatic adjustment of up to 1/2” to
is used to install 4” to 7” nominal height
wood railings. Brackets should be mounted
assure a quality installation.
at a maximum spacing of 36” into studs or
303 HR Bracket
1.5” 203 HR Bracket
blocking. Stocked in Rollbrite polished
aluminum finish. Mounting hardware (#14
1.5” Philip’s Flat-Head screws and 1/4” carriage
1.75”
bolt and lock nut) included.
1.5-2” 2.75”

HR-203 HANDRAIL MOUNTING

BRACKET. Manufactured from #380
cast aluminum alloy, this two-piece bracket
is used to install 7” nominal height wood
railings. The vertical orientation of the
mounting holes is well suited for installation
into studs. Stocked in polished aluminum. MODEL DESCRIPTION SIZE
Mounting hardware (#14 Philip’s flat-head
HR Bracket 203 HR Bracket
1.5”
screws and 1/4” carriage bolt and lock nut) RS-700 Railing Body 9-1/2” Foot nominal lengths
1.31”
included.
RC-700 Inside/Outside Corner w/Alignment Pins 1-1/2” Inside radius
2.81”
2.81”
HR-700 Mounting Bracket Kit with Hardware Adjusts rail from 1-1/2” to 2”

1.5-2” MODEL DESCRIPTION SIZE

1.75”

HR-303 Mounting Bracket for 4” to 7” Rail 2-1/2” x 1-3/4”

HR-203 Mounting Bracket for 7” Rail 1-3/4” x 2-7/8”

Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com
12
 How to Specify Rakks Products
SPECIFYING STANDARDS SPECIFYING STANDARDS

1) Specify Model (C, M, E, G, D, Q). 1) Specify Model: BR, BR2, TB, BU, BA, BTR, BF or BL.
Note: Q-standards are compatible with BR and TB Brackets only. Note: L-Brackets (BL) must be used with PC2 poles.
2) Specify Length (up to 144”). 2) Specify Shelf Depths.
3) Specify Surface or Recessed Mounting. Note: BR, TB, and BL Brackets will support shelves up to 24” deep.
BU Universal Brackets will support shelves from 9” to 14” deep.
4) Specify Spacing. We suggest a maximum spacing of 32” for most
BA, BTR, and BF Brackets will support shelves up to 12” deep.
applications. For heavy loads shorter spans may be required.
Note: Specified spacing should be determined by the weight capacity 3) Specify Finish: clear anodized, black anodized, white powder-coat
of the brackets and the strength of the shelf. or custom.
Note: Aria (BA) Brackets are stocked in clear and black only.
5) Specify Finish: clear anodized, black anodized, white
powder coat or custom. 4) Specify Options and Accessories: Retaining Pins, Shelf Rests,
Shelf Couplers, Bookends, Glass Hold Down, Hangbars.
6) Specify Access Slot locations if required.
5) Specify Make-To-Order Configurations: Slanted, Notched,
SPECIFYING POLES Shelf Lip, Face-Out, Waterfall.
Note: Rakks Extruded Aluminum shelves should be supported with
1) Select Model (PL, PC2, PC4, PS4, PD6). Rakks Style BR or BR2 Brackets.

2) Specify Length:
SPECIFYING EXTRUDED ALUMINUM SHELVES
PL poles – up to 11’ floor-to-ceiling with extension.
PC2, PC4, PS4 up to 12’ floor-to-ceiling. 1) Specify Shelf Depth from 4” – 18” – see shelf combinations page 9.
PD6 up to 16’ floor-to-ceiling.
2) Specify Shelf Lengths up to 144”.
3) Specify Pole Configuration. See pages 2-3. Note: shelves can be joined end-to-end at a bracket, with shelf splines.
4) Specify Finish: clear anodized, black anodized, white powder- 3) Specify Finish: clear anodized (stocked) or custom.
coat or custom.
4) Specify Options-Shelf Spline, Shelf Hold-Down Clip, Label Holder.
Note: PS4 and PD6 are not stocked in white.
Note: Rakks Extruded Aluminum shelves should be supported with
5) Specify Access Slot Locations if required. Rakks Style BR or BR2 Brackets. Specify Retaining Pins for Wall-
6) Specify Options: Grommets, Spline Connectors, Mounted and L-bracket applications.
Channel Nut Plates, Panel Framing Channels, Hinges,
Endcaps, Lamp Bracket, Threaded Insert. SPECIFYING HANDRAIL PRODUCTS

SPECIFYING COUNTER SUPPORT BRACKETS 1) Handrail Mounting Brackets are available in 2 configurations:
1) Specify Counter Depth – up to 30”. We will cut any Counter HR-203 or HR-303.
Support Bracket down to a smaller size. 2) For HR-700 system. Specify wood and aluminum finishes.
2) Specify Mounting Configuration: Surface Mount or “in-wall”
Flush Mount. TECHNICAL AND DESIGN SUPPORT
3) Specify Finish: mill (unfinished) aluminum, off-white powder-
Please call Rangine Corporation’s experienced engineering and technical
coat, primed, clear anodized or custom.
sales staff for assistance in designing your project or specifying Rakks. We
4) Specify Options: Face Plates for flush mount, Grommets are eager to support you with additional technical specifications, samples,
for wire management. prototypes, or custom design.
5) Angled and Vanity Brackets are made to order. A dimensioned
drawing with specified angles may be required. ©2011 Rangine Corporation | Rakks is a registered trademark of Rangine Corporation.
Toggler™ is a trademark of Mechanical Plastics Corp.

Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com
13
RANGINE CORPORATION DESIGNS
Founded in 1971, Rangine Corporation has been devoted to the design, All designs presented are, and remain the property of Rangine
development and production of innovative architectural shelving Corporation. Rangine Corporation reserves the right to make changes
systems. Starting with the introduction of the original Rakks Shelf in specifications, design, and/or construction without prior notification.
Bracket and wall mounted Standard, our shelving systems have been
continuously improved and expanded to provide attractive, flexible, DESIGN SERVICES & ADDITIONAL INFORMATION
and affordable shelving and display solutions. Our specialty brackets
provide practical solutions for the installation of counters and railings Rangine Corporation’s experienced engineering and technical sales staff
while reducing installation costs. are eager to provide layout and design assistance. Working with your
preliminary layout or concept, we will provide a detailed design, parts
Rakks Shelving Systems and Specialty Brackets are designed and breakdown and quote for any application.
manufactured in Rangine Corporation’s headquarters, located in
Needham, Massachusetts (approximately 15 miles west of Boston).
Call Rangine Corporation at 800-826-6006 for additional
WARRANTY specifications, literature or product samples.
By Fax 781-455-8702.
Rakks Products are covered by a one year replacement warranty against By Email [email protected]
all defects in material and workmanship.

Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com