DCR-PC330/PC330E RMT-831

SERVICE MANUAL LEVEL 2

US Model
Ver 1.2 2004. 09 Canadian Model
Revision History Korea Model
DCR-PC330
AEP Model
UK Model
How to use East European Model
Acrobat Reader Australian Model
Hong Kong Model
Chinese Model
DCR-PC330E
E Model
Tourist Model
DCR-PC330/PC330E

Photo : DCR-PC330
Z MECHANISM
本资料由ＯＫＸＩＡ视听皮带资源库ｗｗｗ．ｏｋｘｉａ．ｃｎ提供
Link

SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS

SERVICE NOTE FRAME SCHEMATIC DIAGRAMS REPAIR PARTS LIST

DISASSEMBLY SCHEMATIC DIAGRAMS

• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987627251.pdf).

• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987627241.pdf).
• For MECHANISM ADJUSTMENTS, refer to the “DV MECHANICAL ADJUSTMENT MANUAL
Z MECHANISM ” (9-876-210-11).
• Reference No. search on printed wiring boards is available.

On the CD-452, VC-325 and BT-021 boards

This service manual provides the information that is premised the circuit board replacement service and not intended repair
inside the CD-452, VC-325 and BT-021 boards.
Therefore, schematic diagram, printed wiring board, waveforms, mounted parts location and electrical parts list of the CD-452,
VC-325 and BT-021 boards are not shown.
The following pages are not shown.
Schematic diagram ............................. Pages 4-11 to 4-48 Mounted parts location .................. Pages 4-101 to 4-103
Printed wiring board ............................ Pages 4-75 to 4-82 Electrical parts list ......................... Pages 5-18 to 5-27
Waveforms ........................................... Page 4-97 to 98

DIGITAL VIDEO CAMERA RECORDER

DCR-PC330/PC330E

COVER

SPECIFICATIONS

System Input/Output connectors AC Adaptor AC-L15A/L15B

Video recording system Audio/Video input/output Power requirements
2 rotary heads, Helical scanning system 10-pin connector AC 100 - 240 V, 50/60 Hz
Sitll image recording system Video signal: 1 Vp-p, 75 Ω (ohms), Current consumption
Exif Ver. 2.2 *1 unbalanced 0.35 - 0.18 A
*1 “Exif” is a file format for still images, Luminance signal: 1 Vp-p, 75Ω (ohms), Power consumption
established by the JEITA (Japan Electronics unbalanced 18 W
and Information Technology Industries Chrominance signal: DCR-PC330: 0.286Vp-p Output voltage
Association). Files in this format can have DCR-PC330E: 0.3Vp-p DC 8.4 V, 1.5 A
additional information such as your 75Ω (ohms), unbalanced Operating temperature
camcorder’s setting information at the time of Audio signal: 327 mV (at output impedance 0° C to 40° C (32° F to 104° F)
recording. more than 47 kΩ (kilohms)), Input impedance Storage temperature
Audio recording system more than 47 kΩ (kilohms), Output impedance -20° C to + 60° C (-4° F to + 140° F)
Rotary heads, PCM system with less than 2.2 kΩ (kilohms) Dimensions (approx.)
Quantization: 12 bits (Fs 32 kHz, stereo 1, DV input/output 56 × 31 × 100 mm (2 1/4 × 1 1/4 × 4 in.) (w/h/
stereo 2), 16 bits (Fs 48 kHz, stereo) 4-pin connector d) excluding the projecting parts
Video signal Headphones jack Mass (approx.)
DCR-PC330: NTSC color, EIA standards Stereo minijack (φ 3.5 mm) 190 g (6.7 oz) excluding the power cord
DCR-PC330E: PAL color, CCIR standards LANC jack
Usable cassette Stereo mini-minijack (φ 2.5 mm) Rechargeable battery pack (NP-FM30)
Mini DV cassette with the mark USB jack Maximum output voltage
printed mini-B DC 8.4 V
Tape speed MIC jack Output voltage
SP: Approx. 18.81 mm/s Minijack, 0.388 mV low impedance with DC DC 7.2 V
LP: Approx. 12.56 mm/s 2.5 to 3.0 V, output impedance 6.8 kΩ Capacity
Recording/playback time (using a DVM60 (kilohms) (φ 3.5 mm), Stereo type 5.0 Wh (700 mAh)
cassette) Dimensions (approx.)
SP: 60 min LCD screen 38.2 × 20.5 × 55.6 mm
LP: 90 min Picture (1 9/16 × 13/16 × 2 1/4 in.) (w/h/d)
Fast forward/rewind time (using a DVM60 6.2 cm (2.5 type) Mass (approx.)
cassette) Total dot number 65 g (2.2 oz)
Approx. 2 min 40 s 211 200 (960 × 220) Operating temperature
Viewfinder 0° C to 40° C (32° F to 104° F)
Electric viewfinder (color) General Type
Image device Power requirements Lithium ion
5.9 mm (1/3 type) CCD (Charge Coupled DC 7.2 V (battery pack)
Device) DC 8.4 V (AC Adaptor) “Memory Stick”
Gross: Approx. 3 310 000 pixels Average power consumption (when using the Memory
Effective (still): Approx. 3 050 000 pixels battery pack) Flash memory
Effective (movie): Approx. 2 050 000 pixels During camera recording using the viewfinder 16MB: MSA-16A
Lens 3.3 W Operating voltage
Carl Zeiss Vario-Sonnar T* During camera recording using the LCD DC 2.7 - 3.6 V
Combined power zoom lens 3.8 W Power consumption
Filter diameter: 37 mm (1 1/2 in.) Operating temperature Approx. 45 mA during operation mode
10 × (Optical), 120 × (Digital) 0° C to 40° C (32° F to 104° F) Approx. 130 µA during tape recording standby
F = 1.8 ~ 2.1 Storage temperature Dimensions (approx.)
Focal length -20° C to + 60° C (-4° F to + 140° F) 21.5 × 50 × 2.8 mm (7/8 × 2 × 1/8 in.) (w/h/d)
5.1 - 51 mm (7/32 - 2 1/8 in.) Dimensions (approx.) Mass (approx.)
When converted to a 35 mm still camera 59 × 119 × 113 mm (2 3/8 × 4 3/4 × 4 1/2 in.) 4 g (0.14 oz)
In CAMERA-TAPE: (w/h/d)
45 - 450 mm (1 13/16 - 17 3/4 in.) Mass (Approx.)
Design and specifications are subject to change
In CAMERA-MEMORY: 540 g (1 lb 3 oz) main unit only
without notice.
37 - 370 mm (1 1/2 - 14 5/8 in.) 630 g (1 lb 6 oz) including the NP-FM30
Colour temperature rechargeable battery pack, DVM60 cassette
[AUTO], [HOLD], [INDOOR] (3 200 K), and lens cap.
[OUTDOOR] (5 800 K) Supplied accessories
Minimum illumination See page 4.
7 lx (lux) (F 1.8)
0 lx (lux) (during NightShot function)*
*Objects unable to be seen due to the dark can be
shot with infrared lighting.

—2—
 DCR-PC330/PC330E

SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.

SAFETY CHECK-OUT

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

1. Check the area of your repair for unsoldered or poorly-soldered Unleaded solder
connections. Check the entire board surface for solder splashes Boards requiring use of unleaded solder are printed with the lead-
and bridges. free mark (LF) indicating the solder contains no lead.
2. Check the interboard wiring to ensure that no wires are (Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
"pinched" or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point : LEAD FREE MARK
them out to the customer and recommend their replacement. Unleaded solder has the following characteristics.
4. Look for parts which, through functioning, show obvious signs • Unleaded solder melts at a temperature about 40°C higher than
of deterioration. Point them out to the customer and ordinary solder.
recommend their replacement. Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
5. Check the B+ voltage to see it is at the values specified.
Soldering irons using a temperature regulator should be set to
6. Flexible Circuit Board Repairing about 350°C.
• Keep the temperature of the soldering iron around 270˚C Caution: The printed pattern (copper foil) may peel away if the
during repairing. heated tip is applied for too long, so be careful!
• Do not touch the soldering iron on the same conductor of the • Strong viscosity
circuit board (within 3 times). Unleaded solder is more viscous (sticky, less prone to flow) than
• Be careful not to apply force on the conductor when soldering ordinary solder so use caution not to let solder bridges occur such
or unsoldering. as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.

—3—
DCR-PC330/PC330E

• SUPPLIED ACCESSORIES
Make sure that the following accessories are supplied with your camcorder.

1 2 3

4 5 6 7 8

9 qa qs qd

qf qg

1 AC Adaptor (1), Mains lead (1) 9 Battery terminal cover (1)

2 NP-FM30 rechargeable battery pack (1) q; 2-pin Conversion adaptor (1)
3 A/V connecting cable (1) (AV multi)(1.5m) (PC330: JE/PC330E: JE)
qa 2-pin Conversion adaptor (1)
4 Wireless Remote Commander (1)
(PC330: E/PC330E: E, HK)
(RMT-831)
qs Lens cap (Large) (1)
5 USB cable (1)
6 CD-ROM (1) qd Lens cap (Small) (1)
SPVD-010 USB Driver (DCR-PC330: E, JE, KR/PC330E) When you use the lens food,
SPVD-010 (I) USB Driver (DCR-PC330: US, CND) use the small lens cap.
7 Cleaning cloth (1) qf Lens hood (1)
8 21-pin adaptor (1) (Models with mark qg Memory stick (MSA-16A) (1)
printed on their bottom surfaces only)
(PC330E: AEP, UK, EE)

—4—
 DCR-PC330/PC330E

TABLE OF CONTENTS
1. SERVECE NOTE FRAME SCHEMATIC DIAGRAM (2/4) ······················· 4-3
1-1. SERVICE NOTE ····························································· 1-1 FRAME SCHEMATIC DIAGRAM (3/4) ······················· 4-5
1. POWER SUPPLY DURING REPAIRS ·························· 1-1 FRAME SCHEMATIC DIAGRAM (4/4) ······················· 4-7
2. TO TAKE OUT A CASSETTE WHEN NOT EJECT 4-2. SCHEMATIC DIAGRAMS
(FORCE EJECT) ····························································· 1-1
3. HOW TO OPEN THE FLASH WHEN THE FLASH Schematic diagram of the CD-452, VC-325 and
DOSEN’T OPEN ···························································· 1-1 BT-021 board are not shown.
4. DISCHARGING OF THE FLASHLIGHT POWER Pages from 4-11 to 4-48 are not shown.
SUPPLY CAPACITOR ··················································· 1-2
5. NOTES ON HANDLING THE LASER DIODE • BJ-005/FP-705 FLEXIBLE (DC/USB/DV JACK,
[LASER UNIT (D7609 of FP-706 flexible)] ·················· 1-3 PANEL SWITCH)
1-2. SELF-DIAGNOSIS FUNCTION ···································· 1-4 SCHEMATIC DIAGRAM ···························· 4-49
1. SELF-DIAGNOSIS FUNCTION ···································· 1-4 • PD-198 (RGB DRIVE, BACKLIGHT DRIVE)
2. SELF-DIAGNOSIS DISPLAY ······································· 1-4 SCHEMATIC DIAGRAM ···························· 4-51
3. SELF-DIAGNOSIS CODE TABLE ································ 1-5 • VF-158 (1/3) (RGB DRIVE, TIMING GENERATOR,
BACK LIGHT)
2. DISASSEMBLY SCHEMATIC DIAGRAM ···························· 4-53
2-1. LCD CABINET (R) ASSEMBLY ··································· 2-2 • VF-158 (2/3) (MIC AMP)
2-2. CABINET (F) SECTION ················································ 2-3 SCHEMATIC DIAGRAM ···························· 4-55
2-3. CABINET (REAR) SECTION ······································· 2-3 • VF-158 (3/3) (CONNECTOR, PITCH/YAW SENSOR
2-4. CONTROL SWITCH BLOCK (PS5000) ······················· 2-4 AMP)
2-5. CABINET (R) SECTION ··············································· 2-4 SCHEMATIC DIAGRAM ···························· 4-57
2-6. TRIPOD SCREW ···························································· 2-5 • AV-081/JK-257 (AV MULTI/HP/LANC/MIC JACK)
2-7. BJ-005 BOARD ······························································· 2-5 SCHEMATIC DIAGRAM ···························· 4-59
2-8. BT-021 BOARD, LITHIUM BATTERY • FP-704 FLEXIBLE (MS CONNECTOR)
(SECONDARY) ······························································ 2-6 SCHEMATIC DIAGRAM ···························· 4-61
2-9. LOUD SPEAKER (1.6CM), FP-704 BOARD, MEMORY • FP-706 FLEXIBLE (REMOCON SENSOR, MF SW)
STICK CONNECTOR ···················································· 2-7 SCHEMATIC DIAGRAM ···························· 4-63
2-10. HINGE BLIND ASSEMBLY ·········································· 2-8 • FP-702/FP-707 FLEXIBLE (FLASH DRIVE)
2-11. LCD UNIT ······································································ 2-8 SCHEMATIC DIAGRAM ···························· 4-65
2-12. PD-198 BOARD ······························································ 2-9 • FLASH UNIT (ST5000)
2-13. HINGE ASSEMBLY ····················································· 2-10 SCHEMATIC DIAGRAM ···························· 4-67
2-14. EVF SECTION ······························································ 2-11 • FP-467/468/228 FLEXIBLE (MD BLOCK)
2-15. VF-158 BOARD ···························································· 2-12 SCHEMATIC DIAGRAM ···························· 4-69
2-16. STROBOSCOPE SECTION ········································· 2-13 • CONTROL SWITCH BLOCK (FK5000)
2-17. FP-707 BOARD ···························································· 2-13 SCHEMATIC DIAGRAM ···························· 4-71
2-18. MIC UNIT (MIC5000) ·················································· 2-14 • CONTROL SWITCH BLOCK (PS5000)
2-19. STROBOSCOPE LUMINOUS UNIT (ST5000), SCHEMATIC DIAGRAM ···························· 4-73
STROBOSCOPE ASSEMBLY ····································· 2-14
2-20. LENS SECTION ··························································· 2-15 4-3. PRINTED WIRING BOARDS
2-21. FP-706 BOARD - (1) ···················································· 2-15
2-22. FP-706 BOARD - (2) ···················································· 2-16 Printed wiring board of the CD-452, VC-325
2-23. CD-452 BOARD, LENS DEVICE LSV-870A ············· 2-17 and BT-021 board are not shown.
2-24. GMR (M) SENSOR ······················································ 2-17 Pages from 4-75 to 4-82 are not shown.
2-25. IRIS (IR870), STEPPING MOTOR Z870A ·················· 2-18
2-26. VC-325 BOARD ··························································· 2-19 • BJ-005 (DC/USB/DV JACK)
2-27. MECHANISM DECK ··················································· 2-19 PRINTED WIRING BOARD ······················· 4-83
2-28. AV-081 BOARD ···························································· 2-20 • FP-705 FLEXIBLE (PANEL SWITCH)
2-29. JK-257 BOARD ····························································· 2-20 PRINTED WIRING BOARD ······················· 4-85
2-30. CONTROL SWITCH BLOCK (FK5000) ····················· 2-22 • PD-198 (RGB DRIVE, BACK LIGHT DRIVE)
2-31. CABINET (L) ASSEMBLY ·········································· 2-22 PRINTED WIRING BOARD ······················· 4-85
2-32. CABINET (G) ASSEMBLY ········································· 2-23 • AV-081 (AV MULTI)
2-33. CIRCUIT BOARDS LOCATION ································· 2-24 PRINTED WIRING BOARD ······················· 4-87
2-34. FLEXIBLE BOARDS LOCATION ······························ 2-25 • JK-257 (HP/LANC/MIC JACK)
HELP (List of caution points is shown here.) PRINTED WIRING BOARD ······················· 4-87
• VF-158 (RGB DRIVE, TIMING GENERATOR, BACK
3. BLOCK DIAGRAMS LIGHT, MIC AMP, CONNECTOR, PITCH/YAW
3-1. OVERALL BLOCK DIAGRAM (1/4) ··························· 3-1 SENSOR AMP)
3-2. OVERALL BLOCK DIAGRAM (2/4) ··························· 3-3 PRINTED WIRING BOARD ······················· 4-89
3-3. OVERALL BLOCK DIAGRAM (3/4) ··························· 3-5 • FP-704 FLEXIBLE (MS CONNECTOR)
3-4. OVERALL BLOCK DIAGRAM (4/4) ··························· 3-7 PRINTED WIRING BOARD ······················· 4-91
3-5. POWER BLOCK DIAGRAM (1/2) ································ 3-9 • FP-707 FLEXIBLE (FLASH DRIVE)
3-6. POWER BLOCK DIAGRAM (2/2) ······························ 3-11 PRINTED WIRING BOARD ······················· 4-92
• FP-706 FLEXIBLE (REMOCON SENSOR, MF SW)
4. PRINTED WIRING BOARDS AND PRINTED WIRING BOARD ······················· 4-93
SCHEMATIC DIAGRAMS • FP-467/468/228 FLEXIBLE (MD BLOCK)
PRINTED WIRING BOARD ······················· 4-95
4-1. FRAME SCHEMATIC DIAGRAM (1/4) ······················· 4-1

—5—
DCR-PC330/PC330E

4-4. WAVEFORMS ······························································ 4-99

Waveforms of the CD-452 and VC-325 board are not

shown.
Pages 4-97 to 4-98 are not shown.

4-5. MOUNTED PARTS LOCATION ······························· 4-104

Mounted parts location of the CD-452, VC-325

and BT-021 board are not shown.
Page 4-101 to 4-103 is not shown.

5. REPAIR PARTS LIST

5-1-1. OVERALL ······································································ 5-3
5-1-2. CABINET (R) SECTION-1 ············································ 5-4
5-1-3. CABINET (R) SECTION-2 ············································ 5-5
5-1-4. CABINET (L) SECTION-1 ············································ 5-6
5-1-5. CABINET (L) SECTION-2 ············································ 5-7
5-1-6. EVF SECTION ································································ 5-8
5-1-7. STROBOSCOPE SECTION ··········································· 5-9
5-1-8. LENS SECTION ··························································· 5-10
5-1-9. OVERALL (MECHANISM DECK-Z101) ···················· 5-11
5-1-10. LS CHASSIS BLOCK ASSEMBLY ·························· 5-12
5-1-11. MECHANICAL CHASSIS BLOCK ASSEMBLY ···· 5-13
5-2. ELECTRICAL PARTS LIST ········································ 5-14

Parts list of the BT-021, CD-452 and VC-325

board are not shown.
Pages from 5-18 to 5-27 are not shown.

—6—
 DCR-PC330/PC330E

COVER SECTION 1
SERVICE NOTE

1-1. SERVICE NOTE

1. POWER SUPPLY DURING REPAIRS
In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so
that the unit cannot operate.
This following two methods are available to prevent this. Take note of which to use during repairs.

Method 1.
Use the AC power adaptor (AC-L15, AC-VQ800 etc.).

Method 2.
Connect the servicing remote commander RM-95 (J-6082-053-B) to the LANC jack, and set the commander switch to the “ADJ” side.

2. TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)

1 Open the flash. (When the flash doesn’t open, refer to “3. HOW TO OPEN THE FLASH WHEN THE FLASH DOSEN’T OPEN”.)
2 Refer to page 2-3 to remove the cabinet (F) section.
3 Refer to page 2-3 to remove the cabinet (Rear) section.
4 Refer to page2-4 to remove the cabinet (R) section.
5 Refer to page2-11 to remove the EVF section.
6 Refer to page2-13 to remove the stroboscope section.
7 Refer to page2-15 to remove the lens section.
8 Open the VC-325 board.
9 Refer to page 2-19 to remove the VC-325 board and the mechanism deck.
q; Disconnect CN2502 (27P, 0.3mm) of VC-325 board.
qa Supply +4.5V from the DC power supply to the loading motor and unload with a pressing the cassette compartment.

Loading motor
Disconnect the flexible board from
CN2502 of VC-325 board. DC power supply
(+ 4.5Vdc)

CN2502

VC-325 board

3. HOW TO OPEN THE FLASH WHEN THE FLASH DOSEN’T OPEN

1-1
DCR-PC330/PC330E

4. DISCHARGING OF THE FLASHLIGHT POWER SUPPLY CAPACITOR

The power supply capacitor (C4208) of the FP-707 flexible is charged up to the maximum 300V potential.
There is a danger of electric shock by this high voltage when the capacitor is handled by hand. The electric shock is caused by the charged
voltage which is kept without discharging when the main power of the unit is simply turned off. Therefore, the remaining voltage must be
discharged as described below.

4-1. PREPARING THE SHORT JIG

To preparing the short jig. a small clip is attached to each end of a resistor of 1kΩ/1W (1-215-869-119)
Wrap insulating tape fully around the reads of the resistor to prevent electric shock.

1 kΩ/1 W

Wrap insulating tape.

4-2. DISCHARGING THE CAPACITOR

1 Open the flash. (When the flash doesn’t open, refer to “3. HOW TO OPEN THE FLASH WHEN THE FLASH DOSEN’T OPEN”.)
2 Refer to page 2-3 to remove the cabinet (F) section.
3 Refer to page 2-3 to remove the cabinet (Rear) section.
4 Refer to page 2-4 to remove the cabinet (R) section.
5 Refer to page 2-11 to remove the EVF section.
6 Refer to page 2-13 to remove the stroboscope section.
7 Remove the insulation sheet of the capacitor (C4208) of the FP-707 flexible.
8 Short-circuit between (+) and (–) terminal of the capacitor (C4208) with the short jig about 10 seconds.

Short jig

C4208

1-2
 DCR-PC330/PC330E

5. NOTES ON HANDLING THE LASER DIODE [LASER UNIT (D7609 of FP-706 flexible)]
The laser diode may suffer electrostatic breakdown because of the potential difference generated by the charged electrostatic load, etc. on
clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use the procedure in the printed matter which is included in the repair parts.
The flexible board is easily damaged and should be handled with care.

5-1. Soldering Conditions of Laser Unit (D7609)

Temperature of Less than 350 °C
the Soldering Iron
Time to Solder 3 seconds
Interval to Solder Next terminal is soldered after
waiting for 1 second

Note: Adjustment is needed when laser unit (D7609) is replaced. Refer

to “24. AF Laser Output Adjustment”, “25. AF Laser Axis Check
(1)” and “26. AF Laser Axis Check (2)” of SERVICE MANUAL,
ADJ (987627251.pdf).

Laser Unit (D7609)

1-3
DCR-PC330/PC330E

1-2. SELF-DIAGNOSIS FUNCTION

1. SELF-DIAGNOSIS FUNCTION 2. SELF-DIAGNOSIS DISPLAY
When problems occur while the unit is operating, the self-diagnosis When problems occur while the unit is operating, the counter of the
function starts working, and displays on the viewfinder, or LCD viewfinder or LCD screen consists of an alphabet and 4-digit number,
screen what to do. This function consists of two display; self- which blinks at 3.2Hz. This 5-character display indicates the
diagnosis display and service mode display. “repaired by:”, “block” in which the problem occurred, and “detailed
Details of the self-diagnosis functions are provided in the Instruction code” of the problem.
manual.
Viewfinder or LCD screen
C:31:11

Blinks at 3.2Hz

C 31 11

Repaired by: Block Detailed Code

C : Corrected by customer Indicates the appropriate Refer to page 1-5.
H : Corrected by dealer step to be taken. Self-diagnosis Code Table.
E : Corrected by service E.g.
engineer 31 ....Reload the tape.
32 ....Turn on power again.

Note: The self-diagnosis display data will be kept even if the lithium battery (BT9901 of BT-021 board) is removed.

1-4
 DCR-PC330/PC330E
Ver 1.1 2003. 11

3. SELF-DIAGNOSIS CODE TABLE

Self-diagnosis Code
Repaired by:

Block Detailed Symptom/State Correction

Function Code

C 0 4 0 0 Non-standard battery is used. Use the info LITHIUM battery.

C 2 1 0 0 Condensation. Remove the cassette, and insert it again after one hour.
C 2 2 0 0 Video head is dirty. Clean with the optional cleaning cassette.
C 3 1 1 0 LOAD direction. Loading does not
complete within specified time Load the tape again, and perform operations from the beginning.
C 3 1 1 1 UNLOAD direction. Loading does not
complete within specified time Load the tape again, and perform operations from the beginning.
C 3 1 2 0 T reel side tape slacking when unloading. Load the tape again, and perform operations from the beginning.
C 3 1 2 1 Winding S reel fault when counting the
rest of tape. Load the tape again, and perform operations from the beginning.
C 3 1 2 2 T reel fault. Load the tape again, and perform operations from the beginning.
C 3 1 2 3 S reel fault. Load the tape again, and perform operations from the beginning.
C 3 1 2 4 T reel fault. Load the tape again, and perform operations from the beginning.
C 3 1 3 0 FG fault when starting capstan. Load the tape again, and perform operations from the beginning.
C 3 1 4 0 FG fault when starting drum. Load the tape again, and perform operations from the beginning.
C 3 1 4 2 FG fault during normal drum operations. Load the tape again, and perform operations from the beginning.
LOAD direction loading motor time- Remove the battery or power cable, connect, and perform
C 3 2 1 0 out. operations from the beginning.
UNLOAD direction loading motor Remove the battery or power cable, connect, and perform
C 3 2 1 1 time-out. operations from the beginning.
T reel side tape slacking when Remove the battery or power cable, connect, and perform
C 3 2 2 0 unloading. operations from the beginning.
Winding S reel fault when counting the Remove the battery or power cable, connect, and perform
C 3 2 2 1 rest of tape. operations from the beginning.
Remove the battery or power cable, connect, and perform
C 3 2 2 2 T reel fault. operations from the beginning.
Remove the battery or power cable, connect, and perform
C 3 2 2 3 S reel fault. operations from the beginning.
Remove the battery or power cable, connect, and perform
C 3 2 2 4 T reel fault. operations from the beginning.
Remove the battery or power cable, connect, and perform
C 3 2 3 0 FG fault when starting capstan. operations from the beginning.
Remove the battery or power cable, connect, and perform
C 3 2 4 0 FG fault when starting drum operations from the beginning.
FG fault during normal drum Remove the battery or power cable, connect, and perform
C 3 2 4 2 operations operations from the beginning.
Inspect the lens block focus MR sensor (Pin ql, wa of CN1301 of
Difficult to adjust focus VC-325 board) when focusing is performed when the focus ring is
E 6 1 0 0
(Cannot initialize focus.) rotated in the focus manual mode, and the focus motor drive circuit
(IC1303 of VC-325 board) when the focusing is not performed.
Inspect the lens block zoom MR sensor (Pin qh, qj of CN1301 of
Zoom operations fault VC-325 board) when zooming is performed when the zoom switch
E 6 1 1 0
(Cannot initialize zoom lens.) is operated and the zoom motor drive circuit (IC1303 of VC-325
board) when zooming is not performed.
Steadyshot function does not work well.
E 6 2 0 0 (With pitch angular velocity sensor output Inspect pitch angular velocity sensor (SE3502 of VF-158 board)
stopped.) peripheral circuits.
Steadyshot function does not work well.
E 6 2 0 1 (With yaw angular velocity sensor output Inspect yaw angular velocity sensor (SE3501 of VF-158 board)
stopped.) peripheral circuits.
Abnormality when the power supply
E 9 1 0 1 capacitor of the flash unit is being Checking or replacement of the flash unit.
charged.

1-5E
 DCR-PC330/PC330E

COVER SECTION 2
DISASSEMBLY HELP
The following flow chart shows the disassembly procedure.

DISASSEMBLY
HELP

PD-198 board
service position

DISASSEMBLY DISASSEMBLY DISASSEMBLY

DISASSEMBLY

DISASSEMBLY DISASSEMBLY

HELP DISASSEMBLY

DISASSEMBLY

SERVICE POSITION TO
CHECK THE VTR SECTION
HELP
DISASSEMBLY

DISASSEMBLY
DISASSEMBLY

HELP
DISASSEMBLY DISASSEMBLY Discharging the Capacitor

PROCEDURE OF REMOVING THE MECHANISM DECK.

(VTR CHECK SERVICE POSITION)
1 2-2. CABINET (F) SECTION ................................... (page 2-3) qa 2-27. MECHANISM DECK .................................... (page 2-19)
2 2-3. CABINET (REAR) SECTION ........................... (page 2-3) qs 2-28. AV-081 BOARD ............................................ (page 2-20)
3 2-5. CABINET (R) SECTION .................................. (page 2-4) qd 2-29. JK-257 BOARD ............................................ (page 2-20)
4 2-6. TRIPOD SCREW ............................................. (page 2-5) qf SERVICE POSITION TO CHECK
5 2-7. BJ-005 BOARD ................................................ (page 2-5) THE VTR SECTION.............................................. (page 2-21)
6 2-14. EVF SECTION ............................................... (page 2-11)
7 2-16. STROBOSCOPE SECTION .......................... (page 2-13)
8 2-20. LENS SECTION ............................................ (page 2-15)
9 2-21. FP-706 BOARD - (1) ..................................... (page 2-15)
0 2-26. VC-325 BOARD ............................................. (page 2-19)

2-1
DCR-PC330/PC330E

2-1. LCD CABINET (R) ASSEMBLY

3 LCD cabinet (R) assembly 1 Two MI screws

(M1.7 × 2.5)

Caution
Attach the tape (A) as shown 2 Two claws
in the illustration.

Tape (A)
Harness (PB-053)
4 Tape (A)

5 Sheet (panel)

PD-198

-
PD 98
1

Caution
Attach the sheet (panel)
as shown in the illustration.

Sheet (panel)

PD-198

[PD-198 BOARD SERVICE POSITION]

LANC jack Adjustment remote

commander (RM-95)
PD-198 board

-
PD 98
1

AC IN AC power
adaptor

DC IN connector

2-2
 DCR-PC330/PC330E

2-2. CABINET (F) SECTION

3 Open the
cassette lid.

1 Open the jack cover (F) assembly.

2 Tapping screw 6
(TP1.7 × 3.5) (black)
9 Cabinet (F) section

7 Claw

4 Screw (M1.7 × 2.5),

lock ace, p2 (black)

5 Screw (M1.7 × 2.5),

lock ace, p2 (black)

8 Jack cover (F) assembly.

2-3. CABINET (REAR) SECTION

Caution
When install the cabinet (rear) section to
the main body, install the flexible board of
control switch block (PS5000) as shown
in the illustration.

4 Control switch block

(PS5000) (14P)

5 Cabinet (rear) section

2 Two screws
(M1.7 × 4),
lock ace, p2
1 Screw (M1.7 × 2.5),
lock ace, p2 (black)
3 Screw
(M1.7 × 2.5),
lock ace, p2
(black)

2-3
DCR-PC330/PC330E

2-4. CONTROL SWITCH BLOCK (PS5000)

2 Cabinet (rear) assembly

3 Control switch block

(PS5000)

1 Two tapping screws

(M1.7 × 3.5) (black)

2-5. CABINET (R) SECTION

Caution
Be careful not to drop it.

7 Open the
stroboscope. qg Compression spring
8 Screw (M1.7 × 2.5),
qf Battery lock ace, p2 (black)
lock knob
qs FP-704 flexible board (15P)

4 Screw (M1.7 × 2.5),

lock ace, p2 (black)

Caution
If the Cabinet (R) section is removed
with extra force, the FP-704 flexible
board and the BJ-005 board can be
9 Open the cassette lid. damaged. Be careful not to damage
qa them.

5 Screw (M1.7 × 2.5),

q; BJ-005 board (80P) lock ace, p2 (black)

1 Screw (M1.7 × 2.5),

6 Screw (M1.7 × 2.5), lock ace, p2 (black)
lock ace, p2 (black)
3 CPC lid
qd Cabinet (R) section
2 Claw

2-4
 DCR-PC330/PC330E

2-6. TRIPOD SCREW

2 Two tapping screws

(M1.7 × 3.5) (silver) 1 Claw

4 BT terminal retainer

6 Bottom frame assembly 3 Three screws

(M1.7 × 5),
lock ace, p2
7 Tripod screw
5 Tapping screw
(TP1.7 × 3.5) (silver)

2-7. BJ-005 BOARD

1 FP-705 flexible
board (6P)

5 FP-703 flexible
board (15P)

6 BJ-005 board

4 Jack retainer DC

2 Harness 3 Tapping screw

(PB-053) (20P) (M1.7 × 3.5)
(silver)

2-5
DCR-PC330/PC330E

2-8. BT-021 BOARD, LITHIUM BATTERY (SECONDARY)

3 FP-703 flexible
board (15P)

4 BT-021 board

5 Two soldering

2 BT-021 board, 1 Screw (M1.7 × 2.5),

FP-703 flexible board lock ace, p2 (silver)
6 Lithium battery

2-6
 DCR-PC330/PC330E

2-9. LOUD SPEAKER (1.6CM), FP-704 BOARD, MEMORY STICK CONNECTOR

Caution

When re-assembling, align

the switch position beforehand.
9 LCD back light knob

8 Memory stick connector,

Loud speaker (1.6cm),
FP-704 board
6 Speaker retainer q; Indication
assembly 7 Screw selection
(TP1.7 × 2.5) switch
(silver)
4 Screw
(TP1.7 × 2.5)

5 Two tapping
screw
(TP1.7 × 3.5)
(silver)

2 Tapping screw
(TP1.7 × 3.5)
(silver)

1 Tapping screw 3 BB retainer

(TP1.7 × 5)
(silver)
qs Loud speaker (1.6cm)
qf Memory stick connector

qa Remove the
two solderings

qd FP-704 board (15P)

2-7
DCR-PC330/PC330E

2-10.HINGE BLIND ASSEMBLY

2 Open the LCD panel.

3 Two screws (M1.7 × 2.5),

lock ace, p2 (silver)

1 Screw
(M1.7 × 2.5)

Caution
When re-assembling, pass the harness (PB-053)
through the groove the hinge blind assembly.

Groove 4 Hinge blind assembly

The harness must

be hooked here.

Harness (PB-053)

2-11.LCD UNIT
3 LCD cabinet (R) assembly
1 Two MI screws
(M1.7 × 2.5)
2 Two claws
5 Harness
(PB-053) (20P)

Caution A

When re-assembling,
attach the tape (A) as shown.

Tape (A) 4 Tape (A)

Harness (PB-053)

PD-198 -
PD 98
1
6 Two screws
(M1.7 × 2.5),
lock ace, p2 (black)

7 LCD unit

2-8
 DCR-PC330/PC330E

2-12.PD-198 BOARD

1 Sheet (panel)

Caution
6 Screw
When re-assembling, attach
(M1.7 × 2.5),
the sheet (panel) as shown.
lock ace, p2
(silver)
Sheet (panel)
- 9 PD-198 board
PD 98
1
2 Two screws
7 Two claws
(M1.7 × 2.5),
lock ace, p2
(silver) PD-198

8 Back light (6P)

Cold cathode
fluorescent tube (24P)

(6P)
5 Liquid crystal
indicator module

4 Panel protection sheet

3 LCD cabinet (L) assembly

2-9
DCR-PC330/PC330E

2-13.HINGE ASSEMBLY

3
1 Rotate the hinge in the 2 Two tapping screws
direction of the arrow A. (M1.7 × 3.5) (silver)

7 Claw

6 Claw
9 Hinge cover (rear)

8 FP-705 flexible board 5 Screw (grip)

(M1.7 × 2.5) (black)

qs Harness (PB-053)

4 Tape (A)
qd Hinge assembly
qa Hinge cover (front) q; Claw

2-10
 DCR-PC330/PC330E

2-14.EVF SECTION
5 FP-701 flexible
board (10P)

6 MIC unit (MIC5000) (4P)

4 VF protection sheet

Caution
FP-701
flexible board

1 VF-158 board (60P) Harness

2 FP-700 flexible (MIC unit)
board (23P)

3 Control switch block

(FK5000) (8P)

VF protection
sheet

Attach the VF protection sheet in the way

that the PF-701 flexible board is positioned
9 FP-702 flexible in the right angle with the harness (MIC unit).
board (16P)

qa EVF section

7 Three claws

q; Screw (M1.7 × 2.5),

lock ace, p2 (silver)

Caution
The power capacitor of the flash unit is charged up to 300 V maximum. If you touch
the capacitor terminal that is charged to high voltage, you will receive an electric
shock. This high voltage is not discharged even if you turned off the main power
of this set, and it residues. Discharge the residual voltage referring to the service
note (page 1-2).

2-11
DCR-PC330/PC330E

2-15.VF-158 BOARD

3 Slide the Finder in the

direction of the arrow.

2 Two claws

4 Two screws (M1.7 × 2.5),

1 Screw (M1.7 × 2.5), lock ace, p2 (silver)
lock ace, p2 (silver)
5 VF lens assembly,
VF regulation ring assembly

6 Two screws
(M1.7 × 2.5),
lock ace, p2 (silver)

qa VF light sheet

q; LCD cushion (044)

9 Sleeve guide assembly
8 Two claws

7 VF PC board fixed plate

Caution
Be careful not to drop the LCD
cushion (044) and VF light sheet.

Caution
qs Be careful not to drop the LCD cushion (2)
and BL cushion (B)

qg Three claws

qd LCX033AN-1
w; VF-158 board (16P)
qf LCD cushion (2)

qh Back light holder

qj BL cushion (B)

ql Light guide plate block (0.44)

qk BL retainer sheet metal

2-12
 DCR-PC330/PC330E

2-16.STROBOSCOPE SECTION

Caution
The power capacitor of the flash unit is charged up to 300 V maximum. If you touch
the capacitor terminal that is charged to high voltage, you will receive an electric
shock. This high voltage is not discharged even if you turned off the main power
of this set, and it residues. Discharge the residual voltage referring to the service
note (page 1-2).

1 Screw (M1.7 × 2.5),

lock ace, p2 (black)

3 Stroboscope section

2 Three tapping screws

(M1.7 × 3.5) (silver)
2-17.FP-707 BOARD

Caution
The power capacitor of the flash unit is charged up to 300 V maximum. If you touch
the capacitor terminal that is charged to high voltage, you will receive an electric
shock. This high voltage is not discharged even if you turned off the main power
4 Screw (M1.7 × 2.5), of this set, and it residues. Discharge the residual voltage referring to the service
lock ace, p2 (silver) note (page 1-2).

2 Remove the
two solderings

9 FP-707 board
3 Elect 80MF cap
8 ST insulating sheet
6 Make the FP-707
board inside-out.

1 Condenser insulating sheet

7 Stroboscope luminous
7

unit (ST5000) (24P)

0
-7
P
F

5 Two claws

2-13
DCR-PC330/PC330E

2-18.MIC UNIT (MIC5000)

2 Two screws
(M1.7 × 2.5), 5 Two screws
4 Two tapping screws (M1.7 × 2.5) (silver)
lock ace, p2 (silver)
(M1.7 × 3.5) (silver)

6 Claw

7 Hot shoe frame

qa Microphone
qs MIC unit cushion
(MIC5000)

q; Cabinet (upper)

8 FP-701 flexible
1 Two screws board (10P)
(M1.7 × 1.8)
9 External connector
(hot shoe)

2-19.STROBOSCOPE LUMINOUS UNIT (ST5000), STROBOSCOPE ASSEMBLY

Caution
6 Screw (M1.7 × 2.5),
lock ace, p2 (silver) switch

1 Two tapping screws

(M1.7 × 5) (black)
When re-assembling,
confirm the switch position.

4 Two 7 Screw (bolt)

claws 8 Stroboscope luminous (M1.4 × 3)
unit (ST5000)

qa Two cushions
(stroboscope)
5 Unit cover
assembly q; Blind cabinet

2 Claw
3 Stroboscope
cabinet qs Stroboscope
assembly
9 Three claws

2-14
 DCR-PC330/PC330E

2-20.LENS SECTION

Caution

6 Lens section
- Tape (A)
VC5
32 When re-assembling,
attach the tape (A) as shown.

1 CD-452 board
(80P)

2 Tape (A)

3 Flexible board
(from lens device)(33P)
5 Screw 4 FP-706 board (18P)
(M1.7 × 2.5),
lock ace, p2(silver)

2-21.FP-706 BOARD - (1)

5 MF ring assembly,
FP-706 board
1 Tapping screw
(M1.7 × 5) (silver)

4 Lens device LSV-870A,

CD-452 board, etc.

2 Tapping screw
(M1.7 × 5) (silver)

3 Remove the
four dowels and
convex part

2-15
DCR-PC330/PC330E

2-22.FP-706 BOARD - (2)

2 Screw (M1.7 × 2.5),
lock ace, p2 (silver) 6 MF ring assembly

5 Screw (M1.7 × 2.5),

lock ace, p2 (silver)

3 Tapping screw
(M1.7 × 3.5) (silver)
1 Two
claws
4 IR frame

7 Caution

FP-706 board

Caution
q; FP-706 board When soldering the laser unit on the FP-706 board,
observe the following things.
(Refer to Service Note (page 1-3)).

Observe the following conditions of temperature

and time of soldering.
Temperature of soldering iron : 350°
Time of contacting the soldering : 3 seconds
iron with the solder

8 Three solderings The laser diode may suffer electrostatic breakdown

because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the
human body.
9 Laser unit
During repair, pay attention to electrostatic breakdown
and also use the procedure in the printed matter which
is included in the repair parts.

The flexible board is easily damaged and should be

handled with care.

2-16
 DCR-PC330/PC330E

2-23.CD-452 BOARD, LENS DEVICE LSV-870A

(CD radiation sheet)
4 CD heat sink,
CD radiation sheet, 3 Tapping screw
8 Lens device LSV-870A
MD flexible guard sheet, etc. (M1.7 × 5) (silver)

(CD heat sink)

CD radiation sheet
9 Optical filter block (L)(large)
(OFB-04-30)
q; Seal rubber (870)

qs CCD block
assembly
qd CD-452
board (MD flexible guard sheet)
(CD radiation sheet (small))

5 CDF sheet
qa Remove the 2 CD shield
solderings sheet (A)

7 Two tapping screws

(M1.7 × 5) (silver)

6 BB retainer cushion (A)

1 FK flexible
fixed sheet

2-24.GMR (M) SENSOR

1 Screw (M1.4 × 3.5)
3 Remove the
four solderings

4 GMR (M) sensor

2 MR spacer (760)

Caution
Be careful not to drop Caution
the MR spacer (760).
Be careful not to drop
the MR spacer (760).
6 MR spacer (760)

8 GMR (M) sensor

5 Screw
(M1.4 × 3.5)

7 Remove the
four solderings

2-17
DCR-PC330/PC330E

2-25.IRIS (IR870), STEPPING MOTOR Z870A

1 Remove the
two solderings
Caution

2 Remove the
two solderings

3 Peel off the

adhesion
part.

Iris (IR870)

5 Tapping screw
6 Iris (IR870) (B1.7 × 5) (black)

7 Two tapping screws

(B1.7 × 5) (black)

8 Stepping motor
Z870A
4 Remove the
four solderings

2-18
 DCR-PC330/PC330E

2-26.VC-325 BOARD

2 Two claws

6 Flexible board
(from the video head) (10P)
5 Flexible board
(from the drum motor) (10P) 7 FP-702 flexible
board (16P)

5 8 VC-325 board
- 32
3 Flexible board VC
(from the capstan motor) (27P)

4 Flexible board 1 Screw (M1.7 × 2.5),

(from the sensor) (27P) lock ace, p2 (silver)

2-27.MECHANISM DECK 6 Mechanism deck

5 MD frame assembly

1 Screw (M1.7 × 2.5),

lock ace, p2 (silver)
4 Four screws
3 Mechanism deck, (M1.4 × 1.5),
MD frame assembly
2 Screw (M1.7 × 2.5),
lock ace, p2 (silver)

2-19
DCR-PC330/PC330E

2-28.AV-081 BOARD

1 AV-081 board (10P)

2-29. JK-257 BOARD

6 Claw
4 Jack cover (AV) assembly 7 Jack retainer (AV)

8 JK-257 board
3

2 Two tapping screws

(M1.7 × 3.5) (silver)
5 Three screws
(M1.7 × 2.5),
lock ace, p2
(silver)

1 FP-700 flexible
board (23P)

2-20
 DCR-PC330/PC330E

[SERVICE POSITION TO CHECK THE VTR SECTION]

Connection to Check the VTR Section
To check the VTR section, set the VTR to the “Forced VTR power ON” mode.
Operate the VTR functions using the adjustment remote commander (with the HOLD switch set in the OFF position).
Setting the “Forced VTR Power ON” mode Exiting the “Forced VTR Power ON” mode
1) Select page: 0, address: 01, and set data: 01. 1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00. 2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 02, and press 3) Select page: D, address: 10, set data: 00, and press the
the PAUSE button of the adjustment remote commander. PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.

Note1: When the flash error code (E: 91: **) is displayed. After completion of “VTR check”,
clear the error flag in the following method.
1) Select page: 0, address: 10, and set data: 00.
2) Select page: 7, address: 00, and set data: 80.
3) Select page: 7, address: 01, set data: 80 and press the PAUSE button.
4) Check that the data of page: 7, address: 02 is “01”.
Note2: If the power can not be turned on, after
removing the LCD block. Connect a jumper
wire between Pins 5 (LCD 2.8V) and qg
(BL CONT) of CN1005 on BJ-005 board.

Lens section
1 5 15 20
CN1005

BJ-005 board
CD-452 board
DC IN jack Mechanism deck Monitor TV

CN2502
CN2501
CN2503 AV-081 board

AC power
adaptor AC IN
CN1801 LANC jack EVF section
V 32

Control switch block

C 5
-

19 CN1007
20 (PS5000)
VC-325 board 1
2

CN1005 CN1008
CN1006 CN1501
(CPC)

CPC-6 flexible jig VF-158 board

(J-6082-370-C)
JK-257 board
To eject a cassette, connect
the control switch block
(PS5000). Cabinet (rear) section Adjustment remote
commander (RM-95)
CPC-6 jig
(J-6082-371-A)

PROCEDURE OF REMOVING THE MECHANISM DECK.

(VTR CHECK SERVICE POSITION)
1 2-2. CABINET (F) SECTION ................................... (page 2-3) 8 2-20. LENS SECTION ........................................... (page 2-15)
2 2-3. CABINET (REAR) SECTION ........................... (page 2-3) 9 2-21. FP-706 BOARD - (1) .................................... (page 2-15)
3 2-5. CABINET (R) SECTION .................................. (page 2-4) 0 2-26. VC-325 BOARD ........................................... (page 2-19)
4 2-6. TRIPOD SCREW ............................................. (page 2-5) qa 2-27. MECHANISM DECK .................................... (page 2-19)
5 2-7. BJ-005 BOARD ................................................ (page 2-5) qs 2-28. AV-081 BOARD ............................................ (page 2-20)
6 2-14. EVF SECTION ............................................... (page 2-11) qd 2-29. JK-257 BOARD ............................................ (page 2-20)
7 2-16. STROBOSCOPE SECTION .......................... (page 2-13)

2-21
DCR-PC330/PC330E

2-30.CONTROL SWITCH BLOCK (FK5000)

2 Claw

3 Control switch block (FK5000)

1 Four tapping screws

(M1.7 × 3.5) (silver)

2-31.CABINET (L) ASSEMBLY

3 Cabinet (L) assembly

1 Screw (M1.7 × 2.5), 2 Two tapping screws

(M1.7 × 3.5) (silver)
lock ace, p2 (black)

2-22
 DCR-PC330/PC330E

2-32.CABINET (G) ASSEMBLY

Caution
groove
8 Cabinet (G) assembly
G arm assembly
Claw

Grip lock
knob

7 Claw When re-assembling, align one claw of the grip lock knob
with the groove of the G arm assembly.

3 Hold grip q; G arm assembly

assembly

1 Two screws
(M1.7 × 2.5), 4 Two screws
lock ace, p2 (M1.7 × 2.5),
(black) lock ace, p2 6 Two tapping
(black) screws
(M1.7 × 3.5)
(silver)

2 Two screws
(M1.7 × 2.5)
5 Two screws 9 Grip lock knob
(M1.7 × 2.5),
lock ace, p2
(black)

2-23
DCR-PC330/PC330E

2-33.CIRCUIT BOARDS LOCATION

VF-158
CD-452 AV-081

JK-257

VC-325

BJ-005 PD-198

BT-021

NAME FUNCTION
AV-081 AV MULTI
BJ-005 DC/USB/DV JACK
BT-021 BATTERY (SECONDARY)
CD-452 CCD IMAGER, TG
JK-257 HP/LANC/MIC JACK
PD-198 RGB DRIVE, BACKLIGHT DRIVE
CAMERA A/D CONVERTER, EVR (D/A), AFLD, IRIS/FOCUS/ZOOM/ND FILTER DRIVE,
CAMERA PROCESS, MPEG MOVIE/DIGITAL STILL PROCESS, HI CONTROL, DIGITAL
VC-325 STILL CONTROL, FLASH MEMORY, DV SIGNAL PROCESS, DV INTERFACE, REC/PB AMP,
VIDEO I/O, A/D CONV, DRUM/CAPSTAN/LOADING DRIVE, CAMERA/MECHA CONTROL,
AUDIO I/O, CONNECTOR, DC IN, CHARGE, DC/DC CONVERTER
RGB DRIVE, TIMING GENERATOR, BACK LIGHT, MIC AMP, CONNECTOR,
VF-158
PITCH/YAW SENSOR AMP

2-24
 DCR-PC330/PC330E

2-34.FLEXIBLE BOARDS LOCATION

The flexible boards contained in the mechanism deck and that in the lens device are not shown.

FP-701
FP-702 FP-707

FP-705
FP-706

CONTROL SWITCH BLOCK

(PS5000)
STROBOSCOPE
LUMINOUS UNIT (ST5000) CONTROL SWITCH BLOCK FP-700
(FK5000)

FP-704
FP-703

2-25E
 DCR-PC330/PC330E

2003.09.03

HELP
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.

LCD UNIT Tape (A)

Harness (PB-053) Sheet (panel)

PD-198
PD-198

CABINET (R) SECTION

BT flexible
protection sheet
Hinge blind assembly

Groove

The harness must

be hooked here.

BB retainer cushion (A) Harness (PB-053)

(3-085-319-01)
VC-325 BOARD
BB retainer cushion (A)
(3-085-318-01)
Tape (A) BB retainer cushion (A) VC spacer
(3-085-319-01) VC spacer

VC 325
VC electrostatic
CD radiation sheet (A)
VC-325 sheet (VC)

BB retainer cushion (A) VC electrostatic sheet (A)

Fuse replacement caution label (3-085-318-01)

CABINET (L) SECTION CABINET (REAR) SECTION

FP-701
flexible board

Harness
(MIC unit) Control switch block
(PS5000)

VF protection
sheet
HELP
DCR-PC330/PC330E

STROBOSCOPE SECTION

Flexible
board
Adjust the flexible
Condenser insulating sheet
board so that it
comes to this
width of the cap.

Condenser insulating sheet

ST insulating sheet
FP-707 board
Elect 80MF cap

LENS SECTION FK flexible fixed sheet CDF sheet CD-452 board

Tape (A)

CD shield sheet (A)

Light guide
cover
LED

Vibration proof tape Vibration proof cushion

FP-706 board

Caution
When soldering the laser unit on the FP-706 board,
observe the following things.
(Refer to Service Note (page 1-3)).

FP-706 board Observe the following conditions of temperature

and time of soldering.
Temperature of soldering iron : 350°
Time of contacting the soldering : 3 seconds
iron with the solder

The laser diode may suffer electrostatic breakdown

because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the
human body.
During repair, pay attention to electrostatic breakdown
Three solderings and also use the procedure in the printed matter which
is included in the repair parts.

The flexible board is easily damaged and should be

Laser unit handled with care.

HELP
 DCR-PC330/PC330E

COVER

3. BLOCK DIAGRAMS

Link

OVERALL BLOCK DIAGRAM (1/4) POWER BLOCK DIAGRAM (1/2)

OVERALL BLOCK DIAGRAM (2/4) POWER BLOCK DIAGRAM (2/2)

OVERALL BLOCK DIAGRAM (3/4)

OVERALL BLOCK DIAGRAM (4/4)

 DCR-PC330/PC330E

COVER SECTION 3 3. BLOCK DIAGRAMS

BLOCK DIAGRAMS

3-1. OVERALL BLOCK DIAGRAM (1/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

CD-452 BOARD VC-325 BOARD(1/3) SPCK BJ-005

LENS ASSY CN7001 CN1501
BOARD(2/4)
CLPDM
25 25 78
IRIS (3/17) (4/17)
SPCK CN1003
(SHUTTER) 122
4 TPA CN1005 CN1001

VOUT1 18
CCD OUT CCD OUT
54
(1/17) 2
56
IC1601 115
VCK
241 IC2101 LCK0 VCK
(7/17)
LCK0
(8/17) NTPA
TPB
45 45
1P, 1N 14 14 1P, 1N
IC7001 26 15
IC7004 • • • • 1 AD0 0-13 | CAMERA
20 143
IC2301 79
IC2201
9 NTPB 46 46
19
CCD OUT
12 12
CCD OUT
52
IC1501 72
71
PROCESS
208
268 119 149 |
49 49
DV
CCD S/H 7 38 61 216 DV 45 6
VOUT2 2P, 2N 4 4 2P, 2N | 269 162 186
IMAGER IMAGER • • • • SIGNAL DV 50 50
14 10 | RYO0-RYO3,DEHD,DEVD.DEFLD.SGOUT LBUS0-LBUS3 |
6 6 6 40 55 202 IFI Y0-Y7 270 120 PROCESS 150 INTERFACE
A/D CONV.
17 223 RF 42
6-3 16 17 21-24 2 3 22 23 AD1 0-13 | 199 271 163 SIGNAL 187
30 39 TRCK0
RG1, RG2, SHD1, 2 PROCESS
279 70 104 47
LH1, LH2, SHP1, 2
H1, H2 CLPDM 9 224 280 121 29 37
14 8 RCO0-RCO3,EDHD,EDVD.EDFLD.FRMREF
V1-V4 | |
IFI C0-C3 281 71
6 227 REC DT REC DT
MPEG 282 122 45
MOVIE REC CK REC CK
PROCESS 264 13 41
CLPOB CLPOB RF IN RF IN
77 IFI HD 265 72
33 37 38 41 11 228 139
CN7001 CN1501 IFI VD RYI0-RYI3,DE0-DE3
IFI OE 266 14
X7001 51 9 92 12 229
49 49 54 107
67.5MHz HD,VD,FLD HD,VD,FLD HD,VD,FLD 267 73
(PC330) 10 91 13 230
48 48 152 189
54MHz 49 272 123
90
(PC330E)
13
IC7002 12

CHCK
47 47
CHCK
273
RCI0-RCI3,DE4-DE7
166
55 153 MC BUS MC BUS
CHCK DV 190 109
| 53 71 71 137 275 124
SIGNAL TO
18 TIMING 155 192
25 GENERATOR
PROCESS 276
HY1 PLL 27IN HY1 PLL 27IN
125
60
SWP
FRRV
SWP
FRRV
2 OVERALL
BLOCK DIAGRAM
31 22 284 12 (3/4)
TRRT TRRT
FRRV ADATAIN0
32 1 57 57 23 168 TRRT ADATAIN1 168
58 TRRV TRRV (PAGE 3-5)
67 56 56 112
2 CAM SO,SI,SCK 20 TRRV
69 86 127
58 58 EXT STROBO ADATAOUT0
71 5 102 111
169 167 SPCK
ADATAOUT1
72 STROBO ON A0-A13 D0-D15 SPCK 114
101 139 126
161 144 195 174 EVF R SFD BCK 157 VSP SO,SI,SCK VSP SO,SI,SCK
47 EVF G 21
EVF B 3
46
185
IRIS DRIVE
7 44 (2/17) HALL AD A0-A13 |
52 VD SO,SCK
M +,- 41
95
EVF HD

IC1302

A0-A10, A12
1 45 170 EVF VD
96
IRIS HALL PANEL R
H 3
5
+,-
36 FOCUS/ (1/17) D0-D15
215
|
40
39
PANEL G
PANEL B
ZOOM/
37 IRIS/ ND HALL 198 45 VD SO,SCK
(2/17) ND FILTER
CONTROL
40
IC1701 92
PANEL HD
PANEL VD
ND HALL
12 +,- IR PWM 93 CN1005 PANEL R
H A6 C7 IR EN 10 6 EVR 20 27 2 13 19

DO-D15
10 PANEL G
IRIS DRIVE 29 33 TO
ND FILTER 11 7 PANEL B
METER
ND DRIVE
B5 C8 35 36 40 53 15 3 OVERALL
BLOCK DIAGRAM
14 ND PWM 17 (2/4)
M 8
+,- B4

A4
ND
FILTER
B7

B8
ND EN 8
9
IC1602
EN01
DIR1A 248 24
PANEL HD
PANEL VD
(BJ-005)
DIR1B
DRIVE 250 23 (PAGE 3-3)
128Mbit
21 FMR A,B
MR 19 IC1303
SDRAM 251

(3/17)
FC PWM CN1007
24 H4 G2 FC EN 14 158
FOCUS
MOTOR
M 25
FOCUS +,-
G4
FOCUS MOTOR
DRIVE G1 15 CAM SO,SCK 159
46 EVF R
EVF G
43 EVF B
EN01 156
ZOOM DIR1A 18 44
30 A,B,XA,XB D2 E2 B3 B2
ZOOM
MOTOR M |
33 C1 E1
ZOOM MOTOR
DRIVE A2 A1
DIR1B SPCK
(IC2101) USB D+, USB D-
28

29
42
EVF HD
EVF VD
4
TO
OVERALL
40 BLOCK DIAGRAM
27 NF SW, (5/17) 24
9 10 MIC L (2/4)
NF DRIVE +,- H6 G3 NF EN 23 MIC R (VF-158)
NF
MOTOR M 26
28
G5
NF MOTOR
DRIVE H2 IC2705 USB CLK 53
IC2101 Y OUT
IC2101 C OUT 46 (10/17)
25 (PAGE 3-3)
(5/17) USB 60 7
29 61 1
4
I/F IC1901 Y
60
5 X2701
48MHz
IC2703 4
2
33
IC1901 C OUT
34
VIDEO
18
C
6 14
16 ZMR A,B 53 IN/OUT V
MR 17 52
3 XTAL
OSC A/D
252
| AD0 C - AD9 C
24
| VIDEO 5
IC901 Y OUT
36
AGC
ACC
22
Y
CONV. 39
CN1301 15 A/D
260 CONV. C
ADCK27 48
245 14 V

ADATAIN0
IC2001 42

NF SW, 301 ADATAIN1

NF EN 131 (12/17) 136
ND HALL
(10/17) CN1007 CN107 CN101 CN401
302
132 (5/17) AUDIO ADATAOUT0 SY I/O
IC2601 239 SIGNAL 298 ADATAOUT1
SC I/O
8 8 3 21

(1/2) HALL AD
USB D+,USB D-
238 IC2704 PROCESS 299 12 12 4 20
FP-706 (FLEXIBLE) SFD BCK

(1/2)
128
(1/2) 184
USB CLK
DIGITAL
82
DATA FROM SFD
AV-081
CAMERA CONTROL DIGITAL STILL 89

PH7601,7602
77

78 CAM SO,SI,SCK
MS BS
MS DIO
STILL
CONTROL 187
DSCK LK
119
PROCESS 87
DATA TO SFD BOARD
CN1001 MS SCLK 215 151
MANUAL 75
5 210 MS BS,DIO,SCLK |
FOCUS 152 VSP SO,SI,SCK
PHOTO 6 211 213
SENSOR A1-A19 D0-D15 150
CN412
116 98 121 137 10
1 1
X2601 5
20MHz 2
3 VIDEO I/O CN081
9
A1-A22 D0-D15 15 14 10 10 5 19 3
(3/3) L AUDIO L I/O 1 A/V
62 92 60 39 (14/17) 54 33 33 9 15 10 (AUDIO/
DATA FROM SFD
9 15
L
19
(14/17) R AUDIO R I/O 6 VIDEO)
55 31 31 8 16 9
SE3501
IC3501
DATA TO SFD IC2901 R

YAW SENSOR 12 18
CN107
3 3
CN1007
YAW AD
130 135 SFD BCK
8 16
L
17
IC3001 L
51
SE3502 YAW/PITCH
PITCH AD
12 D/A CONV.
A/D CONV.
3
2
R
25
23
AUDIO 53
R VF-158 JK-257
SENSOR I/O SP+
PITCH SENSOR 8 AMP 2 1 1 129
8 SP- BOARD BOARD
10

VF-158 BOARD(1/4) A1-A22

64
HP L
HP R 32 32
(2/4) 18 6
(1/3) L J421

2
(HEADPHONES)
34 34 17 7
STROBO ON MIC L R
TO 46

BJ-005 1 OVERALL
BLOCK DIAGRAM
EXT STROBO
49
MIC R
(4/4)
ZOOM VR AD

CN1004
BOARD(1/4) CN1001 CN1005
(PAGE 3-8)
D0-D15
53 53
54 54
(USB) USB D+,USB D-

25 13 28 36

10 1 48 38 45

(6/17)

IC2803
FP-704 FLASH MEMORY

(FLEXIBLE)(1/2) CN7401 CN1004

AUDIO SIGNAL
VIDEO SIGNAL
3 3
VIDEO/AUDIO SIGNAL
MEMORY MS BS,DIO,SCLK 5 5
STICK
7 7

11 11
SP901
SPEAKER 12 12

3-1 3-2
DCR-PC330/PC330E

COVER 3. BLOCK DIAGRAMS

3-2. OVERALL BLOCK DIAGRAM (2/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

BJ-005 BOARD(3/4) PD-198 BOARD(1/2)

PANEL R
CN1005 CN600 CN604
PANEL G LCD901(1/2)
TO PANEL B
19 CN1001 PANEL R,G,B 3 3 40 IC600 19 4
VR,VG,VB
3 OVERALL 15 2 2 39 RGB 20 5 2.5 INCH
BLOCK DIAGRAM (1/4) 17 1 1 38 DRIVE 21 3 COLOR
PANEL HD
(VC-325) LCD
PANEL VD 24 VP PSIG
25 6 UNIT
(PAGE 3-2) 23
COM
23 COM
23
2 2
7
4 8
6 11
47 |
14
48 13
TIMING 15
46 GENERATOR 19
32
HD |
14 14 43
VD 35 22
5 TO 13 13 42
OVERALL 31 28
29 11 11
BLOCK DIAGRAM (3/4)
VD SO,SI,SCK 30 VD SO,SI,SCK 12 12 PWM EXT BL ND901
(VC-325)
27 9 9
(PAGE 3-5) BACK
6 TO OVERALL LIGHT
BLOCK DIAGRAM (4/4) CN606
BL CONT BL CONT BACK LIGHT 1
(VC-325) 22 15 15
DRIVE 3
(PAGE 3-8)
Q600, 601, 612, 613

VF-158 BOARD
(3/4)

CN104
(2/3)
MIC901 MIC 18 35
L IC3601 22
MIC L
MIC R
MIC 14
20 1 MIC AMP
R

CN401 CN101
36 CN102
INTELLIGENT
J431 R SHOE MIC L
MIC
16 16
L
3
48 8 3 ACCESSORY
14 14 33
(PLUG IN POWER) SHOE (1/2)
JK-257 BOARD
(2/3)
MIC L
MIC R 23
25 LCD902
EVF R
(1/3) CN500 EVF
EVF G
46 40 19 14 COLOR LCD
TO EVF B EVF R,G,B R,G,B
4 OVERALL
43 39 IC1650 20 15 UNIT
BLOCK DIAGRAM 44 38 21 13
RGB COM
(1/4) 23 16
DRIVE
(VC-325) BLK, HCK1/2, HST, RGT, DWN, EN, STB, VCK, VST 12
EVF HD
(PAGE 3-2) EVF VD 42 3
2
40
TO
7 OVERALL 15 47 TIMING 5 10
BLOCK DIAGRAM VD SO,SI,SCK 17 VD SO,SI, SCK 48 GENERATOR 14
(1/3)
(3/4) 13 46 31
(VC-325) CN107 HD
43 IC500
(PAGE 3-5) VD 35
42 Q501-503
16 D500,501
XEVF LED ON/OFF BACK LIGHT BACK
DRIVE LIGHT
AUDIO SIGNAL
VIDEO SIGNAL

3-3 3-4
 DCR-PC330/PC330E

COVER 3. BLOCK DIAGRAMS

3-3. OVERALL BLOCK DIAGRAM (3/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

CPC CN1006
FOR ADJUSTMENTS Z MECHA DECK
17 20

SWP RF MON
VC-325 BOARD(2/3) (9/17)
REC CK REC CK
CN1801
REC DT REC DT
44

46
IC1801 6
10 ODD
REC/PB 9 5
AMP DRUM
RF IN RF IN 4 EVEN 3
35
3 2
RF MON
30

SWP RF SWP
39
TO
2 OVERALL
BLOCK DIAGRAM SWP
38
(1/4)

(PAGE 3-2)

MC BUS 172

164 SPCK
35 (11/17)
38
SPCK VSP SO, SCK
36
IC2501
(1/2) M903
(12/17)
CN2503
SWP, FRRV, TRRT, TRRV
IC2601 190
CAP FG
4 CAPSTAN
FG AMP
7 8
FG 1,2 22 CAPSTAN
FG
25
(2/2) 165 CAP ON,CAP FWD
MECHA
52 CONTROL 166 80 20
| |
(12/17) 45 1 17
74
33 CAPSTAN CAP U,V,W 4
IC2602 32
MOTOR
DRIVE
76 | M CAPSTAN
MOTOR

FRRV
(11/17) Q1212,1222 78 1
EEPROM 23 75
TRRT
89
CAP PWM
41 43
CAP ERROR (17/17) SWITCHING
CAP VS
11
TRRV
5 2 6 178
IC2501 H6 G11 77 |
179
LPF (2/2)
IC1201 G9
14

69 (1/2) CN2501 M901

VSP SO,SI,SCK VSP SO,SI,SCK 70 PWM Q1213,1223 63 6 DRUM
DRIVE 64 DRUM U,V,W
67 88
DRUM PWM
44 45
DRUM ERROR
J6 G8
SWITCHING
DRUM VS
67
65 | M MOTOR

68 1
H10 DRUM
LPF MOTOR
82 DRIVE
VD SO, SCK VD SO, SI, SCK 83

80 10 DRUM FG

9 DRUM PG
CN1005
TO
5 OVERALL 29
BLOCK DIAGRAM
(2/4) VD SO, SI, SCK 30 DRUM FG DRUM FG AMP
(BJ-005) 197 53 52
27
(PAGE 3-3)
15
DRUM PG
TO 198 50 DRUM PG AMP 49
7 OVERALL VD SO, SI, SCK 17 CN2502
BLOCK DIAGRAM
(2/4) 13 1 M902
(VF-158) CN1007 LOADING
(PAGE 3-3) 15
13
LOAD,UNLOAD 32

33
LOADING MOTOR
DRIVE
69

72
LM +, – |
M MOTOR
4

TREEL FG
192 29 26 27
SREEL FG REEL FG AMP DEW AD DEW
193 25 22 23 5
LD ON LD ON SENSOR
176
PD OUT PD OUT
133 TAPE END
31 21 TAPE END DETECT 20 T REEL +, – 26 T REEL
H902
1 25 SENSOR

3 TAPE TOP
30 19 TAPE TOP DETECT 18 S REEL +, – 22 S REEL
X2601 H901
20MHz 23 SENSOR
TO
8 OVERALL 66
DEW AD Q901
BLOCK DIAGRAM 65 119
(4/4) HI SO,SI,SCK TAPE END SENSOR
20
(PAGE 3-8) 63
TAPE LED ON
REC PROOF 180
Q902
CHIME SDA,CHIME SCK,CHIME VDD TAPE TOP SENSOR
11
XCC DOWN

106 D901
MODE SW A - MODE SW C
| TAPE LED
108 18

REC PROOF

12 S901
13
4PIN
| MIC902
CONNECTOR
15
XCC DOWN
17 S903
(C.C.DOWN)
7
MODE
|
SWITCH
9
S902
16 VIDEO/AUDIO SIGNAL

3-5 3-6
DCR-PC330/PC330E

COVER 3. BLOCK DIAGRAMS

3-4. OVERALL BLOCK DIAGRAM (4/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

VF-158 BOARD VC-325 BOARD(3/3) XCC DOWN

(4/4)
CN102 CN107 CN1007
JK-257 BOARD INTELLIGENT
4 6
EXT STROBO
20 20 REC PROOF 3
REC PROOF

55
. 55
(3/3) ACCESSORY 8
1.
2
SHOE UNREG
57
.
. 57
. SHOE UNREG
CHIME SDA 160
.
CHIME SCK 162 CHIME SDA
59 59 . TO
SHOE 6. 4.
HOT SHOE ID1
52 57 CHIME AD0 228
.
CHIME SCK
CHIME VDD 8 OVERALL
HOT SHOE ID2 . 52
. . HOT SHOE ID1 (13/17) CHIME AD1 229
BLOCK DIAGRAM(3/4)
(2/2) 5 5
LANC SIG
54 54 58 HOT SHOE ID2
(5/17)
.
CHIME AD2 230 LD ON (PAGE 3-5)
CN401
7 3 50 50
IC3102 CAM DD ON PD OUT
J401
LANC 11
FP700
12 HI CONTROL XCC DOWN 5
189
IC2704 (2/2)
CN101 TXD 23 HI CONTROL
. 190 TXD HI SO 200
. ..
RXD 24 TXD,RXD,SCK 191 RXD HI SI 201
. HI SO,SI,SCK
CN105 . .
RV801 ZOOM VR AD .
SCK 25 XHI SCK 199
6 9 9 185 SCK
CONTROL S801-805
ZOOM

XSCHARGE FULL
SWITCH PHOTO(PHOTO REC,PHOTO FREEZE)
FOCUS, BACK LIGHT 5
KEY AD0
22 22 59 KEY AD0 X 0A 52
157
NIGHT SHOT/NIGHT FRAMING X3101 SCHARGE ON (5/17)
BLOCK X 1A 51 32.768KHz
STROBO DOWN
95 EEP TXD 207
.
5
.
S800 XRESET 14 EEP RXD 206 2
(FK5000) RESET 2 28 28 73 XRESET X TAL 29 X3102 IR ON
16
.
EEP SCK 205
.
6 IC2702
X TAL 10MHz EEPROM
28
TP L
TP R CN602 CN600 CN1005 CN1001 CN1005 Q3104 ZOOM VR AD
LCD901(2/2) Q606,607 34
TP TOP 2 . TOP SEL1 TO
17 17 12. 12 TOUCH EXT STROBO
TOUCH
PANEL
TP BOT
5.
TOUCH PANEL
I/F TP SEL1
.
18
.
.
18
. 9.
.
9. PANEL
48
.
70
TOP SEL2
TP X STROBO ON
1 OVERALL
BLOCK DIAGRAM(1/4)
4 16 16 11 11 I/F .
TP X 71 TP Y (PAGE 3-1)
TP Y
PLUNGER 76

BT9901 BT-021 PD-198 BOARD(2/2)

LITHIUM CN1008 S904
BATTERY CONTROL
(SECONDARY) BOARD CN1006 XS/S SW 6 2 START/STOP S902
S7501
4 1 1 65 KEY AD3 SWITCH
FP-705 (PANEL OPEN) XPOWER SW 1 3
MODE S903
POWER

BLOCK
XMODE SW 2 4 S901

9
CN9901 (FLEXBLE) S7502
(PANEL REVERSE)
2 2 2 66 KEY AD4
XEJECT SW 4 5 OPEN / ZEJECT (PS5000)
KEY AD7 69 6 (FLASH) S900
7
CN1002

20 HI EVER SO
.
21 HI EVER SCK
CN1004 CN7401 S7402
XBATT INFO SW 3 14 14 DISPLAY/BATT INFO

S7401

K2
LANC SIG
LANC I/O
L3
.
40
.
LANC OUT KEY AD1 60 15 15 BACK LIGHT FP-704
K3 39 LANC IN
(FLEXIBLE)
SIRCS PWM 45
RESET A3 (2/2)
LI 3V 14 SIRCS SIG 41
40 40 D2 .
D3 53 VCC
. Q3101
62
C1 3V REG C2 EVER 3.0V IB SO 42
. I/F
35 VTR DO ON IB SI 43
D7601,7602
E2 37 FAST CHARGE (Remote sensor/Infrared ray emitter,
. HI EVER SO,SCK CN1001 Q7601,7602 Camera recording)
E3 75 SHOE ON IR ON
(17/17) 12 LED
IC7601
BL CONT 74 BATT/XEXT SIRCS PWM DRIVE
13
BJ-005 VTR DD ON

SHOE ON
D1
IC1201 (2/2) BL -15V BATT SIG
REMOTE
COMMANDER
RECEIVER
7 4
BOARD BATT/XEXT
DC/DC
CONVERTER,
MT 5V

A 1.5V
(4/4) FAST CHARGE RESET,
LANC I/O D 1.5V
BATT SIG A 1.2V (1/17)
D 1.2V PD OUT PD OUT 17
1 5 .
18 D7609
RP 2.8V
LD ON
IC3902 16
LASER UNIT
FP-706
A 2.8V 4
AF LD DRIVE
D 2.8V (FLEXIBLE)(2/2)
AU 2.8V

EP 2.8V CN1005
70
. 70
. D 1.9V TO
22
72
.
74
72
.
74
A 4.6V BL CONT 6 OVERALL
BLOCK DIAGRAM(2/4)
. .
76
. 76
. AU 4.6V (BJ-005)
78
. 78
. EP 4.6V (PAGE 3-3)
80 80
BT1001
RP 4.6V
BATTERY S 60 60
TERMINAL
EP 13.5V FLASH UNIT
CN1003 CN4201 Q4201-4203,4206
USB 3.1V
1 1 ST UNREG TP4201
(ST5000)
CAM 15V CN4204 CN001
4 4 HIGHT
XE A 20
CAM -7.5V SCHARGE ON VOLTAGE
69 69 Q1201, 5 5 24
. . CHARGER
Q1202 CAM DD ON XSCHARGE FULL C4208
71
. 71
. 6 6 L001
73
. 73
. BATT UNREG TRIGGER
75 75 XENON
J1001
.
77
.
.
77
.
VTR UNREG IC4201 TRANS
FORMAR
TUBE

DC IN 79 79 Q4208
59 59 STROBO ON FLASH XE K 16
16 16
PLUN GER DRIVE 12
CN1001 CN1005
STROBO DOWN S001
SHOE UNREG Q1001,1002 15 15 1 (FLASH CLOSE)
Q1225,
PLUNGER PLUNGER 4.
Q1226 12 12 RY001
DRIVE 5
ST UNREG

FP-707(FLEXIBLE)

3-7 3-8
 DCR-PC330/PC330E

COVER 3. BLOCK DIAGRAMS

3-5. POWER BLOCK DIAGRAM (1/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

BJ-005 VC-325 BOARD (1/2)

CN1005
BT1001
BATTERY
BOARD 70 70
F1205
ST UNREG ST UNREG
TERMINAL
(1/2) 72 72

74 74 F1201
BATT UNREG
76 76

78 78

S 80 80
BATT SIG
Q1201,1202
Q1203,1204
F1202

60 60 CHARGE
SWITCH F1206

69 69
F1207
J1001 71 71
DC IN F1204
LF1003 73 73 VTR UNREG
VTR UNREG
75 75 Q1225,1226
F1203

INIT CHARGE ON
SHOE UNREG
77 77

AST CHARGE
79 79
BATT/XEXT Q1207
59 59 SHOE ON SWITCHING L1203 L1219
A 1.5V
L1213
D 1.5V
D1212
BATT UNREG H01 A9
VTR UNREG L01 A10
BT-021 C1 3V REG
EVER 3.0V C2 Q1217
BOARD B2 V01 B8
SWITCHING
D1204
9 7 40 40 D2
CN1001 Q1208
CN9901 CN1002 (13/17) SWITCHING L1204 L1220
BATTERY A 1.2V A 1.2V
BT9901
LITHIUM IC3102 IN
DETECT L1214
D 1.2V D 1.2V
BATTERY
(SECONDARY) HI CONTROL
H02 B11
54 BATT SENS 14
L02 C10
55 ACV SENS VCC 43 D3
CN105 CN107 CN1007 43 Q1218
SWITCHING
2 28 28 XRESET 73 A3 RESET V02 A8
S800
RESET 75 SHOE ON BATT IN 31 A2
74 BATT/XEXT
Q1209
CONTROL SWITCH RV801 38 INT CHARGE ON HI EVER SO 20 E2 DIN
SWITCHING L1205 L1221
D 1.9V
A 2.8V
BLOCK (FK-5000) ZOOM VR 7 4 4
37 FAST CHARGE HI EVER SCK 21 E3 CLK (17/17)
Q3101
42 IB SO
BATT SIG
I/F
43 IB SI
XCS DD
VTR DD ON
49
35
E4
D1
LD
CTL 1
IC1201 H03 C9

L03 D10
(17/17)
2 USB 3.1V
D 2.8V DC/DC CONVERTER
75 SHOE ON
RESET,LANC I/O Q1219 3 IC1203 3

2
XPOWER SW

XMODE SW
V03 D7
SWITCHING
3.1V REG 1
VTR DD ON 35 L2 TO
INTELLIGENT CN102
55 55 Q1211
VTR UNREG POWER
BLOCK
ACCESSORY 8
1
57 57 SWITCHING L1207 L1227 EP 4.6V
AU 4.6V
DIAGRAM
AU 2.8V
SHOE 2
59 59
5.6V
L1225
(2/2)
REG RP 4.6V RP 4.6V
H1 (PAGE 3-11)
H05 E10 L1223 RP 2.8V
VF-158 L05 E8
A 4.6V
A 2.8V
LANC DC LANC DC L1218
BOARD 53 53 J2
Q1221
AU 4.6V A 1.5V
D 1.5V
(1/2) L1208
Q1212
SWITCHING
G4 CT V05 A5
SWITCHING
USB 3.1V
CAP VS
G3 RT
CN107 D 1.9V
Q1210
11 CDET A4
SWITCHING D 2.8V
L1206 L1226 RP 2.8V
G11 H07 PVCCL1 C8 MT 5V
13 Q1222 G9 L07 L1224 A 2.8V A 1.6V
J401 CN401 SWITCHING
H04 D9 L1222
LANC AU 2.8V
JK-257 CAP ERR
L04 E11 L1217
D 2.8V
H6 INP7
BOARD Q1213
Q1220
SWITCHING D1210
L1216
EP 2.8V
L1209 SWITCHING V04 D5 RECT
DRUM VS C1259
Q1227
SWITCH
VBATP K10
G8 H08
Q1223 H10 L08
SWITCHING PVCCH F11

Q1214
DRUM ERR
J6 INP8 SWITCHING L1210 MT 5V

CAP VS
H06 F10
CAP ERROR
L06 F8 DRUM VS
Q1224 D1209 DRUM ERROR
SWITCHING RECT CAM 15V
5V
V06 K4 C1252
-15V
2
(17/17) 1
CAM -7.5V

PVCCL2 K11
L1201 L1211 IC1204
-7.5V REG

SWV09 J11 3 5
DRV9 H9

Q1215
CAM DD ON
SWITCHING
V09 H8

CAM 15V
K1 1.5 REG
EP 13.5V G2
J1 13.5 REG 1V
SSD0 H2
Q1216
SWITCHING&RECT
L1212 BL -15V

DRV10 J10
L1202

BL CONT
INM10 L9

EP 4.6V
EP 13.5V
EP 2.8V
ON OFF (CHG) BL -15V
CONTROL S902
POWER
CN1008 EP 13.5V BL CONT
XPOWER SW
SWITCH S903
MODE
3
4
XMODE SW

BLOCK
D 2.8V
(PS5000) LED 8

3-9 3-10
DCR-PC330/PC330E

COVER 3. BLOCK DIAGRAMS

3-6. POWER BLOCK DIAGRAM (2/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

VC-325 BOARD (2/2) PD-198 BOARD VF-158 BOARD(2/2)

CN1007
LCD901 A 2.8V L3501
4 4
CN1005 CN1001 CN1005 CN600 Q605 CN604 2.5 INCH
EP 13.5V VDD COLOR
10 10 6 6 18 LCD UNIT SE3501,3502
(2/3) (3/3)
VDOG

D604
16
2 2
AU 2.8V IC3601 IC3501 PITCH/YAW
SENSOR

5 5 EP 2.8V
5 5
IC600 MIC AMP PITCH/YAW
SENSOR AMP
7 7
RGB DRIVE XPOFF
TIMING GENERATOR 16
ND901
(1/3) (1/3)
BACK

EP 4.6V
Q600,601,612,613
CN606
LIGHT
41 41
EP 4.6V IC500 IC1650
41 41 7 7 BL ANODE
BL CONT BACK LIGHT DRIVE 1 BACK LIGHT RGB DRIVE LCD902
22 22 15 15 DRIVE TIMING GENERATOR
EVF
COLOR
6 6 BL -1.5V BL CATHODE LCD UNIT
20 20 3 EP 2.8V
8 8 37 37
Q3313,3319, EP 13.5V VDD
Q3322-3329 39 39 1
VTR UNREG FB1601
5V REG CN107 CN500
& SW
EP 4.6V

EP 13.5V CN1004
VBUS 61 61 V BUS
FP-707 (FLEXIBLE)
EP 2.8V

BL -15V
63 63
USB
FLASH UNIT
BL CONT BJ-005 BOARD(2/2) (ST5000)
Q1001,1002
CN1003 CN4201
PLUNGER
DRIVE
13 13 MT 5V IC4201
14 14
Q4201-4203,4206 FLASH DRIVE
1 1
ST UNREG CN4204 CN001
| | TP4201
4 4 HIGHT 20 20
XE A XENON
SCHARGE ON VOLTAGE | | TUBE
5 5
CHARGER 24 24
XSCHARGE FULL
6 6 C4208

ST UNREG

MT 5V
(14/17) (14/17) (12/17)
(12/17) (15/17)
A 1.2V

D 1.2V
IC3001 IC2901 IC2601 IC1001 CN1004 CN7401
VTR UNREG
Q3001
REG
SP VCC AUDIO AUDIO IC2602 CAMERA 153
XREEL
HALL ON
MT 5V
3.1V 4 4 MS VCC MEMORY
I/O D/A CONV. CONTROL 5 REG 4
A/D CONV. EEPROM MECHA 8 8 STICK
AU 4.6V AU 4.6V
CONTROL

AU 2.8V AU 2.8V
FP-704 (FLEXIBLE)
1

D 2.8V
MS VCC ON FP-706
D 1.9V (5/17) (5/17) (5/17) (5/17) (6/17) (FLEXIBLE)

TO
A 1.2V
CAM DD ON
IC2704 IC2702 IC2703 IC2705 IC2803 IC7601
D 1.2V 189
1 POWER BLOCK
DIAGRAM MS VCC ON
HI
EEPROM XTAL NAND 64Mbit REMOTE
(1/2)
(9/17) (7/17) (4/17) (3/17) (10/17) (3/17) 5 CONTROL OSC FLASH COMMANDER
CHIME PWR CONT DIGITAL MEMORY
4 RECEIVER
(PAGE 3-10) STILL
IC1801 IC2301 IC2101 IC1602 IC2001 IC1601 SCHARGE ON

XSCHARGE FULL
95 CONTROL
157
REC/PB DV SIGNAL DV SIGNAL PROCESS 128Mbit VIDEO CAMERA
RP 4.6V RP 4.6V AMP PROCESS MPEG MOVIE PROCESS SDRAM A/D PROCESS PH7601,7602
RF SIGNAL DIGITAL STILL PROCESS CONV. CN1001 MANUAL
PROCESS AUDIO SIGNAL PROCESS A 4.6V A 4.6V FOCUS
4
PHOTO
FB2703 D7601,7602
D 2.8V 8 MT 5V SENSOR
NIGHTSHOT LED
9
A 2.8V
15 LED
(11/17)
EP 13.5V
RP 2.8V RP 2.8V
IC2501
A 2.8V A 2.8V CAP VS 75
77 CAPSTAN FG AMP Q2705
CN2502
A 1.5V A 1.5V A 1.5V DRUM CHIME VDD
DRUM ERROR 45 MOTOR DRIVE 13 4PIN
CONNECTOR MIC902
DRUM FG,PG AMP
D 1.5V D 1.5V D 1.5V CAP ERROR LOADING
43
MOTOR DRIVE
DRUM VS REEL FG AMP Q2501
USB 3.1V USB 3.1V USB 3.1V 64
TAPE TOP,END DET SENSOR VCC
67 DRUM,CAP ERROR AMP 27 T REEL, H901
D 1.9V D 1.9V D 1.9V S REEL H902
SENSOR
D 2.8V D 2.8V D 2.8V

CHIME PWR CONT

XREEL HALL ON
MT 5V MT 5V
A 4.6V

VTR UNREG VTR UNREG

CAM DD ON

MT 5V TAPE LED A R2515

19 TAPE LED D901

CAP VS

CAP ERROR Z MECHA DECK

DRUM VS A 2.8V

D 2.8V
DRUM ERROR
A 4.6V

39 39 CAM 15V CD-452 BOARD

(1/17) 41 41
CAM 15V Q1501,1502 CAM 15V CAM 15V A4.6V
CAM -7.5V 2 5
IC1501 43 43

CAM DD ON (1/17) (8/17) (10/17) (2/17) (2/17) A/D CAM -7.5V CAM -7.5V CAM -7,5V
(2/17) (1/17) CONV.
37 37

IC3902 IC2201 IC1901 IC1303 IC1302 A2.8V 21 21 A2.8V

IC1304 IC1701 23 23
FOCUS/ZOOM/ FOCUS/ZOOM/
AF LD VIDEO
DRIVE 2.8V
DV
IN/OUT EVR IRIS/ND/NF IRIS/ND LENS ASSY
INTERFACE CONTROL
REG AGC DRIVE Z MR VCC ZOOM MR CAM DD ON
18 45 45 60
SENSOR
CPC
FOR 5
D 2.8V
IC7002 IC7001 IC7003 IC7004
ADJUSTMENTS CN1006
1
2.8V 2.8V F MR VCC
20
FOCUS MR A4.6V
29 29
2 IC7005 3
3.4V
TIMING
GENERATOR
CCD
IMAGER
AMP S/H
SENSOR 5
CN1301 3.4V
CN1500 CN7001 REG.

3-11 3-12E
 DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS

SECTION 4
PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
4-1. FRAME SCHEMATIC DIAGRAM (1/4)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

FRAME SCHEMATIC DIAGRAM(1/4) CCD IMAGER

A CD-452 BOARD

B S001
(FLASH CLOSE)
FLASH UNIT

CN7001
79

77
75

73

71
69

67
65
63

61
59

57

55
53
51

49

47

45
43

41
39

37

35

33
31

29

27
25

23

21
19

17

15
13

11

9
7

3
1
(ST5000)

CAM_PLLSEL1

GND
CSUB

GND

CHCK

GND
FRQ
GND
ZV1

ZSG1
GND

CAM_SO
CAM_CS

GND
GND

TG_HD

TG_FLD

CAM_DD_ON
CAM_15V_FREQ
CAM_15V

CAM_15V

CAM_-7.5V

GND
A_2.5V
A_2.5V
A_4.6V

GND
CLPDM

A_2.8V

A_2.8V
GND
GND
GND
GND

GND
GND
GND

GND

GND
GND
RY001
(PLUNGER)

C
FP-707

B TO B
CN4204 24P
FLEXIBLE

80P
1 STROBO_DOWN

CAM_PLLSEL0
CN4201 16P CN7202 CN7201 16P CN1003
2 ST_GND

XRST_VTR
1 STUNREG 1 1 STUNREG 1

CCDout1N

CCDout2N
CAM_SCK

CCDout1P

CCDout2P
3 ST_GND

CAM_SI

TG_VD
2 STUNREG 2 2 STUNREG 2

TG_ID

STBY
4 PLUNGER

GND
GND

GND

GND
GND

GND

GND

GND

GND

GND
GND

GND
GND

GND
GND

GND

GND
GND
GND

GND

GND

GND
GND

GND

GND
GND

GND
GND

GND
3 STUNREG 3 3 STUNREG 3
D 5 PLUNGER
4 STUNREG 4 4 STUNREG 4

80

78
76

74

72
70

68
66
64

62

60
58

56

54
52

50

48

46
44

42

40
38

36

34
32

30

28
26

24

22
20

18

16
14

12

10
CN1501

4
2
6 N.C.
5 SCHARGE_ON 5 5 SCHARGE_ON 5
7 ST_GND
6 XSCHARGE_FULL 6 6 XSCHARGE_FULL 6
8 ST_GND

9 N.C.
7 ST_GND 7
FP-702 7 ST_GND 7

8 ST_GND 8 8 ST_GND 8
10 N.C.
9 ST_GND 9
FLEXIBLE 9 ST_GND 9
11 N.C.
10 ST_GND 10 10 ST_GND 10
12 XE_K
11 ST_GND 11 11 ST_GND 11
E 13 XE_K
12 PLUNGER 12 12 PLUNGER 12
14 XE_K
13 MT_5V 13 13 MT_5V 13
15 XE_K
14 MT_5V 14 14 MT_5V 14 VC-325 BOARD(1/4)
16 XE_K
15 STROBO_DOWN 15 15 STROBO_DOWN 15
17 N.C.
16 STROBO_ON 16 16 STROBO_ON 16
18 N.C.

19 N.C.

20 XE_A
CN1301 33P
F 21 XE_A
1 I_DRIVE-
22 XE_A
2 I_BIAS+
23 XE_A
3 I_HALL+
24 XE_A
4 I_BIAS-
5 I_HALL-
6 NC_GND

7 I_DRIVE+

8 ND_DRIVE-
G 9 ND_BIAS-

10 ND_HALL-

11 ND_BIAS+

12 ND_HALL+

13 NC_GND

14 ND_DRIVE+

15 Z_MR_GND

16 Z_MR_A
H 17 Z_MR_B
18 Z_MR_VCC

19 F_MR_B
LENS 20 F_MR_VCC
UNIT 21 F_MR_A

22 F_MR_GND/TEMP_GND

23 TEMP_OUT

24 FOCUS+
I 25 FOCUS-

26 NF_DRIVE+

27 NF_DRIVE+
28 NF_DRIVE-

29 NF_DRIVE-

30 ZOOM_A

31 ZOOM_B
32 ZOOM_XA
J 33 ZOOM_XB

16

4-1 4-2 FRAME SCHEMATIC DIAGRAM (1/4)

DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS

FRAME SCHEMATIC DIAGRAM (2/4)

1 2 3 4 5 6 7 8 9 10 11 12 13 14

FRAME SCHEMATIC DIAGRAM(2/4)

A 10P
AUDIO_L 1

N.C. 2

S_GND 3
AV-081 BOARD
N.C. 4
CN081
S_C_I/O 5
A/V
(audio/video) AUDIO_R 6

JACK_AD 7
B VIDEO/AUDIO_GND 8
VIDEO_I/O 9

S_Y_I/O 10

10
1

3
4

5
6
7

8
9
MIC901

10P
S_Y_I/O
S_C_I/O

VIDEO_I/O
N.C.

VIDEO/AUDIO_GND
S GND
JACK_AD

N.C.
AUDIO_R

AUDIO_L
(MIC UNIT)
CN104 4P

CN412
MIC_GND 1
(L)
MIC_L 2
MIC_GND 3
(R) MIC_R 4
CN107 60P B TO B CN1007

D VF-158 BOARD
1 PITCH_AD AU_2.8V 2
VC-325 BOARD(2/4)
3 YAW_AD A_2.8V 4
CN401 23P CN702 CN701 23P CN101
5 VST_C_RESET REG_GND 6
1 EXT_IN_L 1 23 EXT_IN_L 23
7 JACK_AD S_Y_I/O 8
JK-257 BOARD 2
3
MIC_GND
EXT_IN_R
2
3
22
21
MIC_GND
EXT_IN_R
22
21
9 ZOOM_VR_AD VIDEO_I/O 10
11 XCS_EVF S_C_I/O 12
4 MIC_GND 4 20 MIC_GND 20
13 VD_SCK REG_GND 14
5 REG_GND 5 19 REG_GND 19
J431
6 HP_L_OUT 6 FP-700 18 HP_L_OUT 18
15 VD_SO ZOOM_MIC_CONT 16

E MIC
(PLUG IN POWER)
7 HP_R_OUT 7 FLEXIBLE 17 HP_R_OUT 17
17 VD_SI XHP_JACK_IN 18
19 XRST_VTR EXT_STROBO 20
8 REG_GND 8 16 REG_GND 16
21 MIC_GND KEY_AD0 22
9 XHP_JACK_IN 9 15 XHP_JACK_IN 15
23 MIC_L MIC_GND 24
10 REG_GND 10 14 REG_GND 14
J421 25 MIC_R MIC_GND 26
11 XLANC_JACK_IN 11 13 XLANC_JACK_IN 13
27 MIC_GND XRESET 28
(HEADPHONES) 12 LANC_SIG 12 12 LANC_SIG 12
29 REG_GND REG_GND 30
13 LANC_DC 13 11 LANC_DC 11
31 AUDIO_R_I/O HP_L_OUT 32
14 REG_GND 14 10 REG_GND 10
F 15 AUDIO_L_I/O 15 9 AUDIO_L_I/O 9
33 AUDIO_L_I/O HP_R_OUT 34
35 REG_GND REG_GND 36
J401 16 AUDIO_R_I/O 16 8 AUDIO_R_I/O 8
37 EP_2.8V REG_GND 38
17 JACK_AD 17 7 JACK_AD 7
LANC 39 EP_13.5V EVF_VD 40
18 REG_GND 18 6 REG_GND 6
41 EP_4.6V EVF_HD 42
19 VIDEO_I/O 19 5 VIDEO_I/O 5
43 EVF_G EVF_B 44
20 S_C_I/O 20 4 S_C_I/O 4
45 REG_GND EVF_R 46
21 S_Y_I/O 21 3 S_Y_I/O 3
47 MIC_IN REG_GND 48
22 REG_GND 22 2 REG_GND 2
G 23 REG_GND 23 1 REG_GND 1
49 MIC_MONO LANC_SIG 50

51 XLANC_JACK_IN HOTSHOE_ID1 52
53 LANC_DC HOTSHOE_ID2 54
55 SHOE_UNREG SHOE_GND 56

CN7101 10P CN102 57 SHOE_UNREG SHOE_GND 58

10 SHOE_UNREG_GND 10 59 SHOE_UNREG SHOE_GND 60
9 SHOE_UNREG_GND 9
CPC(FOR CHECK)
FP-701 8 SHOE_MIC_L 8
CN1006 20P
H INTELLIGENT
FLEXIBLE
7 SHOE_MIC_GND 7
2 D_2.8V N.C. 1
ACCESSORY 6 EXT_STROBO 6
4 N.C. N.C. 3
SHOE 5 HOTSHOE_ID2 5 CN500 16P
6 REG_GND N.C. 5
4 HOTSHOE_ID1 4 16 COM
8 XCS_MC_FLASH MD2 7
3 LANC_SIG 3 15 G
10 EEP_SI XSYS_RST 9
2 SHOE_UNREG 2 14 R
12 EEP_SCK EEP_SO 11
1 SHOE_UNREG 1 13 B
14 REC_CRRT0 REC_CRRT1 13
12 BLK
LCD902 16 XCS_EEP REG_GND 15
I 11 HCK1
EVF
COLOR
18 FRRV SWP 17
10 HCK2
LCD UNIT 20 RF_MON REG_GND 19
9 HST
8 RGT

CN105 8P 7 DWN
1 REG_GND 6 EN
2 XRESET 5 STB

CONTROL SWITCH BLOCK 3 REG_GND 4 VCK

J (FK5000)
4 REG_GND 3 VST

5 KEY_AD0 2 VSS
6 ZOOM_VR_AD 1 VDD
7 A_2.8V
8 REG_GND

K
16

FRAME SCHEMATIC DIAGRAM (2/4) 4-3 4-4

 DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS

FRAME SCHEMATIC DIAGRAM (3/4)

1 2 3 4 5 6 7 8 9 10 11 12 13 14

A FRAME SCHEMATIC DIAGRAM(3/4)

CN1002 15P CN7301 CN7302 15P CN9901
15 GND 15 1 GND 1
CN1006 6P
14 GND 14 2 GND 2
S7501 S7502 6 GND
(PANEL OPEN) (PANEL REVERSE) 13 N.C. 13 3 N.C. 3
5 GND

4 KEY_AD3
12
11
BT_RTS
BT_TXD
12
11
FP-703 4
5
BT_RTS
BT_TXD
4

5 BT-021
3 GND
FLEXIBLE BOARD
B 2 KEY_AD4
10

9
BT_RXD

BT_CTS
10

9
6

7
BT_RXD

BT_CTS
6
7
FP-705 1 GND
8 N.C. 8 8 N.C. 8

FLEXIBLE 7 LI_3V 7 9 LI_3V 9

6 LCD_4.6V 6 10 LCD_4.6V 10

5 BT_WAKEUP 5 11 BT_WAKEUP 11

4 BT_LED 4 12 BT_LED 12

3 BT_XRST 3 13 BT_XRST 13

C BJ-005 BOARD 2 GND 2 14 GND 14

BT9901
1 GND 1 15 GND 15 LITHIUM BATTERY
(SECONDARY)

CN1005 80P B TO B CN1001

2 KEY_AD4 KEY_AD3 1

4 LCD_GND LCD_GND 3

6 BL_-15V EP_2.8V 5

8 BL_-15V EP_2.8V 7

10 EP_13.5V TP_X 9
D 12 TP_SEL1 TP_Y 11

14 LCD_GND LCD_GND 13 ND901

BACK LIGHT
16 LCD_GND PANEL_G 15
CN604 24P
18 REG_GND PANEL_B 17
TEST1 24
20 REG_GND PANEL_R 19
COM 23
22 BL_CONT LCD_GND 21
VST 22

3
4

5
6
24 PANEL_HD PANEL_VD 23
VCK 21

6P
26 REG_GND REG_GND 25

BL_ANODE 4.6V

N.C.

N.C.

THERM_B(FB)
THERM_G
BL_CATHODE -15V
E 28 XCS_LCD VD_SCK 27
EN 20

CN606
DWN 19
30 VD_SI VD_SO 29
VC-325 BOARD(3/4) 32 REG_GND REG_GND 31
VDD 18

VSS 17
34 BT_TXDT BT_LED_ON 33
VDOG 16
36 BT_XRST BT_RXDT 35
VVSSG 15
38 BT_CTS BT_RTS 37
CN1005 20P 20P CN600 CS 14
40 LI_3V BT_WAKEUP 39
20 BL_-15V 20 1 PANEL_B 1 WIDE 13
42 REG_GND EP_4.6V 41
F 44 REG_GND REG_GND 43
19

18
REG_GND

TP_X
19

18
2

3
PANEL_G

PANEL_R
2

3
HST 12

11
REF
46 TPA- TPA+ 45
17 TP_SEL1 17 4 REG_GND 4 SOUT 10
48 REG_GND REG_GND 47
16 TP_Y 16 5 LCD_2.8V 5 CRext 9
50 TPB- TPB+ 49
15 BL_CONT 15 PB-053 6 EP_13.3V 6 HCK2 8 LCD901
52 REG_GND REG_GND 51
14 PANEL_HD 14 HARNESS 7 EP_4.6V 7 PD-198 BOARD HCK1 7 2.5INCH
COLOR LCD
54 USB_D- USB_D+ 53
13 PANEL_VD 13 8 REG_GND 8 PSIG 6 UNIT
56 REG_GND REG_GND 55
12 VD_SI 12 9 VD_SCK 9 G 5
58 REG_GND OTG_ID 57
G 60 BATT_SIG BATT/XEXT 59
11 VD_SO 11 10 XCS_LCD 10 R 4

10 XCS_LCD 10 11 VD_SO 11 B 3
62 REG_GND VBUS 61
9 VD_SCK 9 12 VD_SI 12 RGT 2 (WITH TOUCH PANEL)
64 REG_GND VBUS 63
8 REG_GND 8 13 PANEL_VD 13 TEST2 1
66 REG_GND REG_GND 65
7 EP_4.6V 7 14 PANEL_HD 14
68 REG_GND REG_GND 67 CN602 6P
6 EP_13.3V 6 15 BL_CONT 15
70 BATT_S_UNREG ACV_UNREG 69 N.C. 6
5 LCD_2.8V 5 16 TP_Y 16
72 BATT_S_UNREG ACV_UNREG 71 TP_TOP 5
4 REG_GND 4 17 TP_SEL1 17
74 BATT_S_UNREG ACV_UNREG 73 TP_BOT 4
H 76 BATT_S_UNREG ACV_UNREG 75
3 PANEL_R 3 18 TP_X 18
N.C. 3

XX
2 PANEL_G 2 19 REG_GND 19
78 BATT_S_UNREG ACV_UNREG 77 TP_L 2
1 PANEL_B 1 20 BL_-15V 20

EXT_BL
80 BATT_S_UNREG ACV_UNREG 79 TP_R 1

CN605

PSIG

HD0
GND

COM

VG
6

5
4

3
2
1
4 TPA BT1001
CN1003
S BATTERY
I DV
3

2
NTPA

TPB
TERMINAL

1 NTPB

5 USB GND
CN1004
4 ID J1001
(USB) 3 D+ DC IN

J 2

1
D-

VCC

16

4-5 4-6 FRAME SCHEMATIC DIAGRAM (3/4)

DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS

FRAME SCHEMATIC DIAGRAM (4/4)

1 2 3 4 5 6 7 8 9 10

FRAME SCHEMATIC DIAGRAM(4/4)

A

CN1801 10P
CN1004 15P
Z MECHANISM 10 GND
15 KEY_AD1 15 CN7401 2P
9 YSDL
14 XBATT_INFO_SW 14 SP- 1
8 XSDL SP901
SPEAKER

B 7 GND
13
12
REG_GND
SP-
13
12
FP-704 SP+ 2

VIDEO HEAD
6 XODD
11 SP+ 11 FLEXIBLE 10P
5 YODD VSS 1
10 REG_GND 10
4 GND VCC 2
9 REG_GND 9 MEMORY
3 YEVEN SCLK 3 STICK
8 MS_VCC 8
2 XEVEN N.C. 4 MEMORY
7 MS_SCLK 7 STICK
1 GND INS 5 CONNECTOR
6 MS_INSERT 6
CN2501 10P N.C. 6
5 MS_DIO 5
C 10 FG
4 MS_VCC 4
DIO 7

9 PG VCC 8
3 MS_BS 3
8 FG/PG_COM BS 9
2 REG_GND 2
7 M_COM VSS 10
1 REG_GND 1
6 DRUM_U
DRUM MOTOR
5 DRUM_U

4 DRUM_W

3 DRUM_W

D 2 DRUM_V

1 DRUM_V

CN2502 27P
1 LM_LOAD
2 LM_LOAD
3 LM_UNLOAD
4 LM_UNLOAD VC-325 BOARD(4/4)
5 DEW+

E 6
7
DEW-

XMODE_SW_A
8 XMODE_SW_B
9 XMODE_SW_C
10 SW_COM/SW_GND
11 TAPE_TOP
12 XREC_PROOF

LOADING MOTOR/ 13 CHIME_VDD

MODE SWITCH/
F TAPE SENSOR/
S.T REEL
14 CHIME_SDA
15 CHIME_SCK
16 MIC/REC_SW_GND
CONTROL SWITCH BLOCK
17 XCCDOWN_SW
18 TAPE_LED_K
(PS5000)
19 TAPE_LED_A
20 TAPE_END CN1008 14P
21 TOP/END_GND REG_GND 1

G 22 SREEL+ XS/S_SW 2

23 SREEL- XPOWER_SW 3

24 HALL_GND XMODE_SW 4

25 TREEL- XEJECT_SW 5

26 TREEL+ KEY_AD7 6

27 HALL_VCC SCHARGE_LED 7

CN2503 27P D_2.8V 8

1 CAP_V CHARGE_LED 9

H 2 CAP_V EVER_3.0V 10
3 CAP_V XVTR_LED 11
4 CAP_V XMEM_LED 12

5 HE_GND XCAM_LED 13

6 UHE+ MS_LED_ON 14
7 UHE-
8 VHE+ CN1001 18P D7608 D7609
PH7601 (TALLY) (LASER UNIT)
9 VHE- AF_LD 18 (MF-A)

I 10 WHE+ AF_LD 17
11 CAP_W AF_PD 16
12 CAP_W A_2.8V 15 PH7602 D7601
CAPSTAN (MF-B) REMOTE SENSOR/
MOTOR D7602
13 CAP_W F_TALLY_LED 14 INFRARED RAY
(CAMERA RECORDING)
EMITTER
14 CAP_W SIRCS_PWM 13
15 WHE- IR_ON 12
16 HE_VCC MT_GND 11
17 CAP_U MT_GND 10

J 18 CAP_U MT_5V 9
19 CAP_U MT_5V 8
20 CAP_U SIRCS_SIG 7 FP-706 3 4
IC7601
21 N.C. MF_B 6 FLEXIBLE REMOTE
COMMANDER
22 FG1 MF_A 5 RECEIVER
23 FG_VCC A_4.6V 4 1 2

24 FG_VCC MF_LED 3

25 FG2 REG_GND 2

K 26 FG_GND REG_GND 1
27 FG_GND

16

FRAME SCHEMATIC DIAGRAM (4/4) 4-7 4-8

 DCR-PC330/PC330E

COVER

4-2. SCHEMATIC DIAGRAMS

Link
BJ-005 BOARD/FP-705 FLEXIBLE BOARD FP-706 FLEXIBLE BOARD
(DC/USB/DV JACK, PANEL SWITCH) (REMOCON SENSOR, MF SW)
FP-702/FP-707 FLEXIBLE BOARD
PD-198 BOARD (RGB DRIVE, BACKLIGHT DRIVE) (FLASH DRIVE)
VF-158 BOARD (1/3)
(RGB DRIVE, TIMING GENERATOR, BACK LIGHT) FLASH UNIT (ST5000)

VF-158 BOARD (2/3) (MIC AMP) FP-467/468/228 FLEXIBLE (MD BLOCK)

VF-158 BOARD (3/3) / FP-700/FP-701 FLEXIBLE BOARD

(CONNECTOR, PITCH/YAW SENSOR AMP) CONTROL SWITCH BLOCK (FK5000)

AV-081/JK-257 BOARD
(AV MULTI/HP/LANC/MIC JACK) CONTROL SWITCH BLOCK (PS5000)

FP-704 FLEXIBLE BOARD (MS CONNECTOR)

COMMON NOTE FOR SCHEMATIC DIAGRAMS WAVEFORMS

 DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS

THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS

(In addition to this, the necessary note is printed in each block)

(For schematic diagrams) 1. Connection

• All capacitors are in µF unless otherwise noted. pF : µ Pattern box
Link
µF. 50 V or less are not indicated except for electrolytics
and tantalums.
• Chip resistors are 1/10 W unless otherwise noted.
kΩ=1000 Ω, MΩ=1000 kΩ.
• Caution when replacing chip parts.
New parts must be attached after removal of chip.
1.0 m
Be careful not to heat the minus side of tantalum
capacitor, Because it is damaged by the heat.
• Some chip part will be indicated as follows.
Example C541 L452
22U 10UH
TA A 2520

Front of the lens

Kinds of capacitor
Temperature characteristics
External dimensions (mm)

• Constants of resistors, capacitors, ICs and etc with XX

indicate that they are not used.
In such cases, the unused circuits may be indicated.
• Parts with * differ according to the model/destination. 2. Adjust the distance so that the output waveform of
Refer to the mount table for each function. Fig. a and the Fig. b can be obtain.
• All variable and adjustable resistors have characteristic H
curve B, unless otherwise noted.
Yellow

Magenta
White
Cyan
• Signal name Green
XEDIT → EDIT PB/XREC → PB/REC

Red
Blue
• 2: non flammable resistor
• 5: fusible resistor
• C: panel designation
• A: B+ Line
• B: B– Line
• J : IN/OUT direction of (+,–) B LINE. A B A=B B A
• C: adjustment for repair. Fig. a (Video output terminal output waveform)
• A: VIDEO SIGNAL (ANALOG)
• A: AUDIO SIGNAL (ANALOG)
• A: VIDEO/AUDIO SIGNAL (ANALOG)
• A: VIDEO/AUDIO/SERVO SIGNAL
• A: SERVO SIGNAL
• Circled numbers refer to waveforms.
(Measuring conditions voltage and waveform)
• Voltages and waveforms are measured between the
measurement points and ground when camera shoots
color bar chart of pattern box. They are reference values Fig.b (Picture on monitor TV)
and reference waveforms.
(VOM of DC 10 MΩ input impedance is used) When indicating parts by reference number, please
• Voltage values change depending upon input include the board name.
impedance of VOM used.)
Note : Note :
The components identified by Les composants identifiés par
mark 0 or dotted line with mark une marque 0 sont critiques
0 are critical for safety. pour la sécurité.
Replace only with part number Ne les remplacer que par une
specified. pièce portant le numéro spécifié.

4-9
Schematic diagram of the CD-452, VC-325 and BT-021
boards are not shown.
Pages from 4-11 to 4-48 are not shown.
DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS BJ-005 BOARD FP-705 BOARD

For Schematic Diagram

• Refer to page 4-85 for printed wiring board of BJ-005 board.
• Refer to page 4-87 for printed wiring board of FP-705 board.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

BJ-005 BOARD
A DC/USB/DV JACK TO VC-325 BOARD (15/17) CN1005

XX MARK:NO MOUNT (PAGE 4-42 of LEVEL3)

CN1001 80P B TO B
2 KEY_AD4 KEY_AD3 1

4 LCD_GND LCD_GND 3
BL_-15V EP_2.8V
6 BL_-15V EP_2.8V 5

8 BL_-15V EP_2.8V 7
EP_13.5V TP_X

TP_SEL1
10 EP_13.5V TP_X 9
TP_Y FP705 PANEL SWITCH
B 12

14
TP_SEL1
LCD_GND
TP_Y

LCD_GND
11

13 FLEXIBLE
PANEL_G
16 LCD_GND PANEL_G 15
PANEL_B S7501
18 REG_GND PANEL_B 17 (PANEL OPEN)
PANEL_R
20 REG_GND PANEL_R 19
BL_CONT CN1006 6P 6P
22 BL_CONT LCD_GND 21
PANEL_HD PANEL_VD 6 GND GND 6
24 PANEL_HD PANEL_VD 23
5 GND GND 5 S7502
26 REG_GND REG_GND 25 (PANEL REVERSE)
XCS_LCD VD_SCK 4 KEY_AD3 KEY_AD3 4
C VD_SI
28
30
XCS_LCD
VD_SI
VD_SCK

VD_SO
27
29
VD_SO 3 GND GND 3
2 KEY_AD4 KEY_AD4 2
32 REG_GND REG_GND 31
BT_TXDT BT_LED_ON 1 GND N.C. 1
34 BT_TXDT BT_LED_ON 33 D1013 D1014
BT_XRST BT_RXDT XX XX
36 BT_XRST BT_RXDT 35
BT_CTS BT_RTS
38 BT_CTS BT_RTS 37
LI_3V BT_WAKEUP
40 LI_3V BT_WAKEUP 39
EP_4.6V
42 REG_GND EP_4.6V 41

D TPA-
44
46
REG_GND

TPA-
REG_GND
TPA+
43

45
TPA+ CN1002 15P
15 GND
48 REG_GND REG_GND 47
TPB- TPB+ 14 GND
50 TPB- TPB+ 49
13 N.C.
52 REG_GND REG_GND 51 BT_RTS
USB_D- USB_D+ 12 BT_RTS
54 USB_D- USB_D+ 53 BT_TXDT
11 BT_TXD
56 REG_GND REG_GND 55 BT_RXDT
OTG_ID 10 BT_RXD
58 REG_GND OTG_ID 57 BT_CTS TO
BATT_SIG BATT/XEXT 9 BT_CTS
FP-703
E 60

62
BATT_SIG

REG_GND
BATT/XEXT

VBUS
59

61
VBUS 8 N.C. FLEXIBLE
CN7301
LI_3V
7 LI_3V
64 REG_GND VBUS 63 (PAGE 4-47
6 LCD_4.6V of LEVEL3)
66 REG_GND REG_GND 65 BT_WAKEUP
5 BT_WAKEUP
68 REG_GND REG_GND 67 BT_LED_ON
4 BT_LED
70 BATT_S_UNREG ACV_UNREG 69 BT_XRST
3 BT_XRST
72 BATT_S_UNREG ACV_UNREG 71
2 GND
74 BATT_S_UNREG ACV_UNREG 73
1 GND
SIGNAL PATH
F 76 BATT_S_UNREG ACV_UNREG 75
VIDEO SIGNAL
78 BATT_S_UNREG ACV_UNREG 77
AUDIO
80 BATT_S_UNREG ACV_UNREG 79 CHROMA Y Y/CHROMA SIGNAL

REC
PB
D1016
NSAD500H-T1-A

G
TPA+
4 TPA
TPA- CN1003
3 NTPA
TPB+ DV
2 TPB
TPB-
PB-053 1 NTPB

LF1001
20P
HARNESS 20P CN1005 20P
0uH
PANEL_B USB_D+
PANEL_B 1 1 PANEL_B PANEL_B 1
H PANEL_G 2 2 PANEL_G PANEL_G 2
PANEL_G R1008
0 5 USB GND
CN1004
PANEL_R
PANEL_R 3 3 PANEL_R PANEL_R 3 4 ID

USB
REG_GND 4 4 REG_GND REG_GND 4 3 D+ (USB)
EP_2.8V USB_D-
LCD_2.8V 5 5 LCD_2.8V LCD_2.8V 5 2 D-
EP_13.5V VBUS
EP_13.3V 6 6 EP_13.3V EP_13.3V 6 1 VCC
LF1002
EP_4.6V OTG_ID 0uH
EP_4.6V 7 7 EP_4.6V EP_4.6V 7
D1006-1009,1015

D1007

D1008

D1009
REG_GND 8 8 REG_GND REG_GND 8 D1015
VD_SCK MAZS082008SO
VD_SCK 9 9 VD_SCK VD_SCK 9 D1003 D1006
I TO
PD-198 BOARD XCS_LCD 10 10 XCS_LCD XCS_LCD 10
XCS_LCD MA8120-TX
CN600 VD_SO
VD_SO 11 11 VD_SO VD_SO 11 D1002
(PAGE 4-51) VD_SI MA8120-TX
VD_SI 12 12 VD_SI VD_SI 12
PANEL_VD
PANEL_VD 13 13 PANEL_VD PANEL_VD 13 BATT_SIG
PANEL_HD BT1001
PANEL_HD 14 14 PANEL_HD PANEL_HD 14
BL_CONT D1001 S BATTERY TERMINAL
BL_CONT 15 15 BL_CONT BL_CONT 15 MAZS082008SO
TP_Y
TP_Y 16 16 TP_Y TP_Y 16
TP_SEL1 BATT/XEXT
TP_SEL1 17 17 TP_SEL1 TP_SEL1 17
J TP_X 18 18 TP_X TP_X 18
TP_X
R1003
XX R1005
1k A
REG_GND 19 19 REG_GND REG_GND 19
BL_-15V LF1003 J1001
BL_-15V 20 20 BL_-15V BL_-15V 20 COLD
DC IN
HOT
C1001 C1002
0.1u 0.1u
B B D1011
MA8120-TX
R1004 D1010
XX MAZS082008SO D1012
MA8120-TX LD1001

K CHASSIS_GND

LD1002
CHASSIS_GND
16
LD1003
CHASSIS_GND

BJ-005/FP-705 4-49 4-50

 DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS PD-198 PRINTED WIRING BOARD

For Schematic Diagram

• Refer to page 4-88 for printed wiring board.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PD-198 BOARD
RBG DRIVE,BACKLIGHT DRIVE
A XX MARK:NO MOUNT
NO MARK:REC/PB MODE
L601
CN600 XX R623
20P Q605 CN605 XX
NDS356AP XX
PANEL_B 1 SWITCH 6 PSIG
13.4 13.4
PANEL_G 2 5 EXT_BL
FB601 C617
0uH R620
PANEL_R 3 C600 C628 C609 100k 0.01u 4 HD0
22u 22u 1.5u

VST

VCK

EN

DWN
C601 B GND
REG_GND 4 6.3V 6.3V 0.1u FB600 C629 25V XPOFF 0 3
TA A TA A B 0uH XX TA A
LCD_2.8V 5 R619 2 COM
C606 0
C602
B EP_13.3V

EP_4.6V
6

7
L600
10uH
C630
XX 1u
B
0.01u
B
1 VG

REG_GND 8
SCK VP
VD_SCK 9
TO XCS C615
PB-053 XCS_LCD 10 4.7u
HARNESS SI B
VD_SO 11

13.4
1.4

2.5

2.8

2.8

2.8

2.5

2.5

7.0
(PAGE 4-49) SO

0
VD_SI 12
XVD
PANEL_VD 13 36 35 34 33 32 31 30 29 28 27 26 25
HD CN604 24P
C PANEL_HD 14

VSS

VST

VCK

EN

DWN

PWM

BLDET

FBACK

EXTDA

XLED

VCC3

VP
24 TEST1
BL_CONT 15
23 COM
TP_Y 16 VST

TP_SEL1 17
4 VCK
22 VST
2.8 21 VCK

37

24
TP_X 18 VDD NC EN
20 EN
REG_GND 19 C603 0.01u 1.8 5 6.9 DWN

38

23
BIN COM 19 DWN
BL_-15V 20 C604 0.01u
1.8 6 14.4 18 VDD

39

22
GIN VCC2
C605 0.01u 3 R614
D604
RD3.3UM-T1B 17 VSS
LCD901(1/2)
2.5INCH
D 1.8
7 IC600 7.0 10 VB

40

21
RIN VB 16 VDOG COLOR LCD
R615 UNIT
7.0 10 VG C618 15 VVSSG
2

41

20
SCAN RGB DRIVE, VG 1u
TIMING GENERATOR R616 B 14 CS
XVD 2.7 8 IC600
7.0 10 VR WIDE

42

19
XVD VR 13 WIDE
CXA3622BR-T4 HST (WITH TOUCH PANEL)
HD 2.6 1 12 HST

43

18
HD GND2 REF
2.8
9 C619 0.1u B 11 REF

44

17
VCC1 GND1 10 SOUT
R622
XCS 2.7 0 XPOFF 150k 9 CRext
E

45

16
XCS XPOFF HCK2
R602 8 HCK2
SCK 470 2.7 0.1 WIDE HCK1

46

15
XSCK WIDE 7 HCK1
SI 0 0 HST 6 PSIG

47

14
SI HST VG
5 G
SO 2.6 2.8 VR

48

13
SO VDD 4 R
VB

XWRT/CLKIN
3 B
RGT
2 RGT

OP_OUT

OP_IN

Filter2
HCK1

HCK2

XCLR

Filter
1 TEST2

HDO
CN602 6P

RGT

VSS
REF
F N.C. 6 R621
10k
TP_TOP 5 1 2 3 4 5 6 7 8 9 10 11 12
LCD901(2/2) TP_BOT 4 7.6 13.4

2.8

1.4

1.4

0.3

1.4

1.4

1.4

2.5

1.7

1.1
Q604
TOUCH UP04601008S0 4 6
PANEL N.C. 3
VP 7.0 5 2
TP_L 2
7.6
TP_R 1 R605 R606 3 1
C616
0 0 0.1U
7.0

R611

HCK1

HCK2
G R641
RGT
R618

REF
C625 XX C611 10k 10k
XX Q611 560p 1/16W 6.4
XX CH ± 0.5%
1 3
2 5
C623 C624 C626 R612
2200p C610 R608 7.0 6.4
B R642 XX 0.1u 68k 100k
XX B 6 4
XX B 1/16W
± 0.5% 13.4 7.0
D605 Q603
R629 XX UP04601008S0
XX
Q603,604
PSIG DRIVE
H 2.8 2.8
R630 L602
XX 10uH
Q606
XP4111-TXE 1 4 R601
2200
± 0.5% Q601 R604
3.0 2 5 3.0 UP04601008S0 22
4.0 4 6 4.5 ± 0.5%
C627 CN606 6P
6 3 4.7u 3.4 5 2 4.0
B 1 BL_ANODE 4.6V
0 2.8 ND901
2.7 3 1 2 N.C.
Q600 BACK
2.8 UN9113J-(K8).SO 1.0 3.4 3 BL_CATHODE -15V LIGHT

I 2.7 0 R645 4 N.C. (THERM SENSOR)

6 3 6800
1.0 5 THERM_B(FB)
0 ± 5%
2 5
Q612 6 THERM_G
Q600,601,612,613 UP04601008S0 R648
3.0 BACKLIGHT DRIVE R603 560 R653 R654 R651
Q607 10k 2.4 2.8 1k
XP4211-TXE XX 0
1 4 4 6
1.9 2.4 2.4
Q606,607
TOUCH PANEL
5 2 C631
XX SIGNAL PATH
I/F 3 1
1.0 1.9
1.9 VIDEO SIGNAL
J R600
3300
C607
XX R646
R652
3300 CHROMA Y Y/CHROMA
R639 ± 5% 22k
LND601
XX REC
CHASSIS GND
16 Q613
R649
2SB1462J-QR(K8).SO
47
PB

Note : Note :
The components identified by Les composants identifiés par
mark 0 or dotted line with mark une marque 0 sont critiques
0 are critical for safety. pour la sécurité.
Replace only with part number Ne les remplacer que par une
specified. pièce portant le numéro spécifié.

4-51 4-52 PD-198

DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS VF-158 PRINTED WIRING BOARD

For Schematic Diagram

• Refer to page 4-91 for printed wiring board.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Q503
UN9112J-(K8).SO
SWITCH
VF-158 BOARD(1/3)
A RGB DRIVE,TIMING GENERATOR,BACK LIGHT(EVF,BL BLOCK) 4.6 D500
NSCW215T-TC5
D501
NSCW215T-TC5
XX MARK:NO MOUNT (BACK LIGHT) (BACK LIGHT)

0.1
NO MARK:REC/PB MODE
4.5

2SB1462J-QR(K8).SO
EP_4.6V R501 R505 1.6 1.5
150k 3300
FB1651 ± 0.5% IC500

Q501

SWITCH
6 4
0uH NJM2125F(TE2)
EP_13.5V 0.9 5 3
0.2 VCC 4.6
L1650

5
FB1650 0.9 0.9
B 10uH 0uH 1 2 Q502

2
EP_2.8V XP6501-(TX).SO

EVF_VST

EVF_VCK

EVF_EN

EVF_STB
EVF_DWN
0.2 0.3 0.2 0.2 LED DRIVE

4
R509
C1652 C1656 C1658 R503 C502 XX
C1650 C1651 1u 0.01u 2.2u 33k XX
22u
C1663 0.1u B 25V ± 0.5% B
XX B
4V B TA C500 R507 R508
TA P 0.1u 22 22
B ± 0.5% ± 0.5%
REG_GND
TH500
XX
1 (3/3)
IC500

13.4
1.3

1.4

2.6

2.8

1.2

1.2
EVF_B
C

0
C1662 ,Q501-503
EVF_G 4.7u BACK LIGHT DRIVE
36 35 34 33 32 31 30 29 28 27 26 25 B
EVF_R

VSS

VST

VCK

EN

DWN

STB

COMPIN

FBACK

EXTDA

OC2

VCC3

VP
EVF_VD
EVF_VD
EVF_HD
EVF_HD 2.8
37

24
XCS_EVF VDD NC
XCS_EVF
VD_SCK 1.7 4 6.8
CN500 16P
38

23
VD_SCK BIN COM 16 COM
D VD_SO
VD_SO C1653 0.01u
1.7 13.4
EVF_VG
15 G
5
39

22
VD_SI GIN VCC2
VD_SI
XRST_VTR
C1654 0.01u
1.7
3 7.1 R1663 10 EVF_VB
EVF_VR
EVF_VB
14 R
40

21
XRST_VTR
C1655 0.01u
RIN
IC1650 VB 13 B

6 2 7.1 R1664 10 EVF_VG 12 BLK

LCD902
EVF
41

20
SCAN RGB DRIVE,TIMING GENERATOR VG EVF_HCK1
11 HCK1 COLOR
EVF_VD 2.7 7.1 R1665 10 EVF_VR LCD UNIT
IC1650 EVF_HCK2
42

19
XVD
7 CXM3008R-T4
VR 10 HCK2

EVF_HD 2.6 1 EVF_HST

9 HST
43

18
XHD GND2 EVF_RGT
8 RGT
E 2.8
8 EVF_DWN
44

17
VCC1 GND1 7 DWN
EVF_EN
XCS_EVF 2.7 0.1 6 EN
45

16
XCS OC1 EVF_STB
5 STB
VD_SCK 2.7 EVF_VCK
46

15
XSCK PCG 4 VCK
EVF_VST
VD_SO 2.7 0 EVF_HST 3 VST
47

14
SI HST
C501 2 VSS
VD_SI 2.7 2.8 2.2u
48

13
SO VDD F 1 VDD

F
OP_OUT

OP_IN

Filter2
HCK1

HCK2

XCLR
PSIN

Filter
RGT

VSS
BLK

REF

R1666
XX
1 2 3 4 5 6 7 8 9 10 11 12
0

1.4

1.4

1.4

1.1

1.2

2.2

1.3

1.1

R1650
XRST_VTR XX SIGNAL PATH
0

C1657 VIDEO SIGNAL

G
R1651

R1652

XX
B
C1661 R1661
CHROMA Y Y/CHROMA
560p 10k
C1659 CH ± 0.5% REC
0.1u
EVF_HCK1

EVF_HCK2
EVF_RGT

B
C1660
0.1u
R1662
100k
PB
B ± 0.5%
R1658
68k

16

VF-158 (1/3) 4-53 4-54

 DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS VF-158 PRINTED WIRING BOARD

For Schematic Diagram

• Refer to page 4-91 for printed wiring board.

1 2 3 4 5 6 7 8 9 10 11 12

VF-158 BOARD(2/3) C3635

0.1u
C3637
0.1u

A MIC AMP(MIC BLOCK) B B

XX MARK:NO MOUNT R3601

18k
R3602
33k
R3629
11k
R3618 XX C3627 XX B ± 0.5%
NO MARK:REC/PB MODE
C3622 R3626
R3631 11k
R3608 XX
6800 B
0 C3628 1000p B ± 0.5%
R3627
C3620 R3614 R3620 5600
R3606 0.1u XX 12k ± 0.5%
2200 B

1k
C3636 C3638
R3612 R3615 0.1u 0.1u

B XX 22k
C3626
B B

R3611
R3607 C3617 100p CH 0.022u
2200 B

B
C3618 XX R3628
MIC901
XX

0.1u
(MIC UNIT)
C3613
CN104 4P C3602 C3614
100p

C3623
0.015u 0.001u
MIC_GND 1 CH
B B
(L) MIC_L 2

2.4
1.4

1.4

1.4
1.4
1.4
1.4

1.4
0
MIC_GND 3
(R) C3603
C MIC_R 4 0.022u
B
36 35 34 33 32 31 30 29 28 27 26 25

1.4
SUB_IN_L
1.4
INT_IN_L

REG_2.5V
EXT_IN_L

MODE_CTL_2

AMP_OUT_L

SG_IN_L

INVT_OUT_L

SUB_SIG_OUT_L
MTX_AMP_IN_L

MTX_AMP_OUT_L
HPF_OUT_L
C3606 C3634
22u 22u EXT_IN_L
4V 4V C3608
1.2 TA SHOE_MIC_L
XX

48 47 46 45 44 43 42 41 40 39 38 37

13 14 15 16 17 18 19 20 21 22 23 24
C_REG HPF_AMP_IN_L P B
GND NC
1.4
R3604 NC L_OUT MIC_L
4700

D
1.4
1.4
ZOOM_AMP_OUT IC3601 MIC_MONO
2.7
2.7 R3623 1200
MIC_MONO

ZOOM_AMP_IN MIC AMP ZOOM_BAL ZOOM_MIC_CONT

C3605 1.4
NC ZOOM_POSI C3632 22u 4V P
0.01u IC3601 2.8 R3624
R3603 B AN2901FHQ-EB VCC 33k
10k 2.6 C3631
1.4 0.1
0.1u B
C3633
R3625 2 (3/3)

SIGNAL PATH MIX_OUT EXT_MIC

1.8
0.22u
F
18k

GND HPF_ON/OFF
C3611 10u 6.3V P 1.4 1.4
AUDIO C_1/2VCC R_OUT
1.4 MIC_IN

MTX_AMP_OUT_R
E

SUB_SIG_OUT_R
SIGNAL SUB_IN_R NC

MTX_AMP_IN_R

HPF_AMP_IN_R
C3601
MODE_CTL_1
R3632 L3601

INVT_OUT_R
AMP_OUT_R

HPF_OUT_R
0.022u 100uH
REC 33k
EXT_IN_R
REG_2.5V
INT_IN_R

AU_2.8V

SG_IN_R
B

PB MIC_R

MIC_GND

1 2 3 4 5 6 7 8 9 10 11 12 EXT_IN_R
C3604
1.4

2.4
1.4
2.2
1.4
1.4

1.4
1.4
1.4
1.4
0.015u
B

F C3610
0.001u
C3612
100p C3615
1k

CH XX
B
C3621
R3610

0.1u
B

C3616
0.1u

100p
CH
C3625
R3613 R3617 0.022u
C3619

XX B
22k R3621
12k

G R3616
XX
6800

C3629 1000P
C3624
XX R3630
0
R3609

C3630 XX
R3619
XX

C3607
H XX

16

4-55 4-56 VF-158 (2/3)

DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS VF-158 PRINTED WIRING BOARD

For Schematic Diagram

• Refer to page 4-91 for printed wiring board of VC-158 board.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

VF-158 BOARD(3/3)
A CONNECTOR,PITCH/YAW SENSOR AMP(CN,SE BLOCK)
XX MARK:NO MOUNT
NO MARK:REC/PB MODE ZOOM_MIC_CONT

ZOOM_MIC_CONT
MIC_L ZOOM_MIC_CONT
MIC_L
TO VC-325 BOARD(15/17) CN1007 MIC_R
MIC_R
(PAGE 4-42 of LEVEL3) MIC_IN
MIC_IN
MIC_MONO
B CN107 60P B TO B MIC_MONO
PITCH_AD
1 PITCH_AD AU_2.8V 2 AU_2.8V
2 (2/3)
YAW_AD
3 YAW_AD A_2.8V 4 EXT_IN_R
VST_C_RESET
5 VST_C_RESET REG_GND 6 MIC_GND
JACK_AD S_Y_I/O
7 JACK_AD S_Y_I/O 8 EXT_IN_L
ZOOM_VR_AD VIDEO_I/O
9 ZOOM_VR_AD VIDEO_I/O 10 SHOE_MIC_L
S_C_I/O
XCS_EVF 11 XCS_EVF S_C_I/O 12
VD_SCK 13 VD_SCK REG_GND 14
C VD_SO 15 VD_SO ZOOM_MIC_CONT 16
XHP_JACK_IN
VD_SI 17 VD_SI XHP_JACK_IN 18
EXT_STROBO
XRST_VTR 19 XRST_VTR EXT_STROBO 20
KEY_AD0

MIC_L
21 MIC_GND KEY_AD0 22
FP-700
23 MIC_L MIC_GND 24
MIC_R
25 MIC_R MIC_GND 26 CN101 23P CN701 23P
FLEXIBLE CN702 23P
XRESET
27 MIC_GND XRESET 28 23 EXT_IN_L EXT_IN_L 23 1 EXT_IN_L

29 REG_GND REG_GND 30 22 MIC_GND MIC_GND 22 2 MIC_GND

D AUDIO_R_I/O
31 AUDIO_R_I/O HP_L_OUT 32
HP_L_OUT
21 EXT_IN_R EXT_IN_R 21 3 EXT_IN_R
AUDIO_L_I/O HP_R_OUT
33 AUDIO_L_I/O HP_R_OUT 34 20 MIC_GND MIC_GND 20 4 MIC_GND

35 REG_GND REG_GND 36 19 REG_GND REG_GND 19 5 REG_GND

HP_L_OUT
EP_2.8V 37 EP_2.8V REG_GND 38 18 HP_L_OUT HP_L_OUT 18 6 HP_L_OUT
EVF_VD HP_R_OUT
EP_13.5V 39 EP_13.5V EVF_VD 40 17 HP_R_OUT HP_R_OUT 17 7 HP_R_OUT
EVF_HD
EP_4.6V 41 EP_4.6V EVF_HD 42 16 REG_GND REG_GND 16 8 REG_GND
EVF_B XHP_JACK_IN
1 (1/3) EVF_G 43 EVF_G EVF_B 44
EVF_R
15 XHP_JACK_IN XHP_JACK_IN 15 9 XHP_JACK_IN

45 REG_GND EVF_R 46 14 REG_GND REG_GND 14 10 REG_GND

E MIC_IN
47 MIC_IN REG_GND 48
XLANC_JACK_IN
13 XLANC_JACK_IN XLANC_JACK_IN 13 11 XLANC_JACK_IN TO
MIC_MONO LANC_SIG LANC_SIG JK-257 BOARD
49 MIC_MONO LANC_SIG 50 12 LANC_SIG LANC_SIG 12 12 LANC_SIG CN401
XLANC_JACK_IN HOTSHOE_ID1 LANC_DC
51 XLANC_JACK_IN HOTSHOE_ID1 52 11 LANC_DC LANC_DC 11 13 LANC_DC (PAGE 4-60)
LANC_DC HOTSHOE_ID2
53 LANC_DC HOTSHOE_ID2 54 10 REG_GND REG_GND 10 14 REG_GND
AUDIO_L_I/O
55 SHOE_UNREG SHOE_GND 56 9 AUDIO_L_I/O AUDIO_L_I/O 9 15 AUDIO_L_I/O
AUDIO_R_I/O
57 SHOE_UNREG SHOE_GND 58 8 AUDIO_R_I/O AUDIO_R_I/O 8 16 AUDIO_R_I/O
JACK_AD
59 SHOE_UNREG SHOE_GND 60 7 JACK_AD JACK_AD 7 17 JACK_AD

6 REG_GND REG_GND 6 18 REG_GND

F VIDEO_I/O
5 VIDEO_I/O VIDEO_I/O 5 19 VIDEO_I/O
S_C_I/O
C104 4 S_C_I/O S_C_I/O 4 20 S_C_I/O
0.1u S_Y_I/O
B 3 S_Y_I/O S_Y_I/O 3 21 S_Y_I/O

2 REG_GND REG_GND 2 22 REG_GND

1 REG_GND REG_GND 1 23 REG_GND

EVF_B
EVF_B LANC_SIG
EVF_R
EVF_R
EVF_VD
EVF_VD
G EVF_HD
EVF_HD
CN105 8P
REG_GND R104 1 REG_GND
XRESET 1k
2 XRESET

IC3501 3
4
REG_GND
REG_GND TO
YAW/PITCH SENSOR AMP KEY_AD0 CONTROL SWITCH BLOCK
5 KEY_AD0 FK5000
ZOOM_VR_AD
R3503 C3504 6 ZOOM_VR_AD (PAGE 4-69)
22u C3513
0 C3511 XX
4V 7 A_2.8V
TA P 10u R3513 B
H R3507 R3509
C3510
0.047u
10k R3515
XX C3514
8 REG_GND
22k 22k B 4.7u L3501
B 10uH
R3504 C3512
0 C3501 10u R3514 C3515 D102
C3506 XX D103
0.1u 1M MAZW082HOLSO MAZW082HOLSO
B 0.047u B
B
1 2 C105 C103
PITCH_AD 0.1u
XX
SE3502
(PITCH SENSOR)
Vref Out
B FP-701
0.7

0.9

1.4

1.4
1.3

1.3

1.3

1.3

CN102 10P CN7101 10P FLEXIBLE

I Gnd Vcc C106
0.001u 10 SHOE_UNREG_GND SHOE_UNREG_GND 10 8P
3 4 10 9 8 7 6 5 4 3 2 1
9 SHOE_UNREG_GND SHOE_UNREG_GND 9 1 SHOE_UNREG_GND
UPC6756GR-8JG-E2
GND

AM1
HO1

OUT1
LO1

PASS
HI1
LIB1
LIA1

Vref1

8 SHOE_MIC_L SHOE_MIC_L 8 2 SHOE_MIC_L

IC3501

7 SHOE_MIC_GND SHOE_MIC_GND 7 3 SHOE_MIC_GND

EXT_STROBO INTELLIGENT
Vref2

R3501 6 EXT_STROBO EXT_STROBO 6 4 EXT_STROBO

LIB2
LIA2

OUT2
CRST

ACCESSORY
LO2

HI2
HO2

AM2

VCC

0 HOTSHOE_ID2 R110 0 SHOE

5 HOTSHOE_ID2 HOTSHOE_ID2 5 5 SHOE_ID2
HOTSHOE_ID1 R111 0
R3505 11 12 13 14 15 16 17 18 19 20 4 HOTSHOE_ID1 HOTSHOE_ID1 4 6 SHOE_ID1
0
3 LANC_SIG LANC_SIG 3 7 LANC_SIG
0.7

0.9

1.4

1.4

1.3

1.3

1.3
1.3

2.8

J R3506
R112
0
FB101
0uH 2 SHOE_UNREG SHOE_UNREG 2 8 SHOE_UNREG

0 VST_C_RESET 1 SHOE_UNREG SHOE_UNREG 1

1 2 C3505 YAW_AD
Vref Out R3508 R3510 0.047u
22k 22k B R3511
SE3501
(YAW SENSOR) C3508 1M

Gnd Vcc C3502

C3507
0.047u
10u
SIGNAL PATH
0.1u B
3 4 B
R3512
VIDEO SIGNAL FP-700,FP701 FLEXIBLE are replaced as a block.
C3509
10k AUDIO So that there PRINTED WIRING BOARD are omitted.
10u
K R3502
CHROMA Y Y/CHROMA SIGNAL
0 C3503
22u REC
4V
16 TA P
PB

VF-158 (3/3)/FP-700/FP-701 4-57 4-58

 DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS AV-081 BOARD JK-257 BOARD

For Schematic Diagram

• Refer to page 4-89 for printed wiring board of AV-081 board and JK-257 board.

1 2 3 4 5 6 7 8 9 10 11 12

A JK-257 BOARD
HP/LANC/MIC JACK
XX MARK:NO MOUNT
EXT_IN_L R432 0
FB432 FB431
0uH 0uH
1
2 J431
EXT_IN_R R434 0 3 MIC
(PLUG IN POWER)
4
LND401 FB434 FB433
0uH
B CN401 23P CHASSIS GND
R431
0uH

EXT_IN_L
EXT_IN_L 1 0

MIC_GND 2 C431

VDR432

VDR434
1000p

1000p
EXT_IN_R 0.01u
EXT_IN_R 3 B

MIC_GND 4
FB422 0uH
REG_GND 5 FB421
0uH 1 J421
HP_L_OUT 6 2
FB424 0uH
3
HP_R_OUT 7 (HEADPHONES)
C REG_GND 8
FB423 0uH
4

XHP_JACK_IN 9
REG_GND 10 R421
TO LANC_SIG 0
XLANC_JACK_IN 11 R422
FP-700 FLEXIBLE
CN702
LANC_SIG 12
XLANC_JACK_IN 0
SIGNAL PATH
(PAGE 4-58) LANC_DC LND402

VDR424

VDR422

VDR423
1000p

1000p

1000p
LANC_DC 13
CHASSIS GND
VIDEO SIGNAL
REG_GND 14
AUDIO
AUDIO_L_I/O
AUDIO_L_I/O CHROMA Y Y/CHROMA SIGNAL
15
D AUDIO_R_I/O 16
AUDIO_R_I/O
FB401 0uH REC
JACK_AD LANC_SIG 4 J401
JACK_AD 17 1
XLANC_JACK_IN R405 0 5 (LANC)
PB
REG_GND 18 2
VIDEO_I/O LANC_DC FB402 0uH 3
VIDEO_I/O 19
S_C_I/O
S_C_I/O 20
S_Y_I/O
S_Y_I/O 21 FB404
0uH R403
REG_GND 22
0
REG_GND 23
E

UDZSTE-178.2B

UDZSTE-178.2B

VDR401
400p
D402

D405
AV-081 BOARD
AV MULTI
LND403
CHASSIS GND

CN412 10P 10P

AUDIO_L_I/O LND101
10 AUDIO_L AUDIO_L 1 1 AUDIO_L
AUDIO_R_I/O LND102
F 9
8
AUDIO_R
N.C.
AUDIO_R
N.C.
2
3
LND103
2 N.C.(LANC_SIG)
S GND
3

10
JACK_AD LND104
7 JACK_AD JACK_AD 4 4 N.C.(LANC_DC)
LND105 CN081 10P
6 S GND S GND 5 5 S_C_I/O A/V
LND106
5 VIDEO/AUDIO_GND AV_GND 6 6 AUDIO_R (audio/video)
LND107
4 N.C.(LANC_DC) N.C. 7 7 JACK_AD

1
VIDEO_I/O LND108
3 VIDEO_I/O VIDEO_I/O 8 8 VIDEO/AUDIO_GND
S_C_I/O LND109
2 S_C_I/O S_C_I/O 9 9 VIDEO_I/O
S_Y_I/O LND110
G 1 S_Y_I/O S_Y_I/O 10 10 S_Y_I/O

R413
0
16
VDR410

VDR419

VDR417

VDR416

VDR415

VDR411
30p

30p

30p

30p

30p

30p

4-59 4-60 AV-081/JK-257

DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS FP-704 PRINTED WIRING BOARD

For Schematic Diagram

• Refer to page 4-93 for printed wiring board.

1 2 3 4 5 6 7 8

FP-704 FLEXIBLE
A MS CONNECTOR
XX MARK:NO MOUNT
LND703
GND

S7401 S7402
D7401 BACK LIGHT DISPLAY/BATTERY INFO
XX

B D7402

1
4

3
2
5 7 XX
LND701
CN7401 15P 6 1 SP- SP901
8 LND702 SPEAKER
KEY_AD1 15 2 SP+
XBATT_INFO_SW 14
REG_GND 13
SP- 12 10P
LND704
SP+ 11 1 VSS
LND705
REG_GND 10 2 VCC
C TO
VC-325 BOARD
REG_GND 9
LND706
3 SCLK MEMORY
STICK
LND707
(15/17) MS_VCC 8 4 N.C.
CN1004 LND708 MOMERY
MS_SCLK 7 5 INS STICK
(PAGE 4-41 LND709 CONNECTOR
of LEVEL3) MS_INSERT 6 6 N.C.
LND710
MS_DIO 5 7 DIO
LND711
MS_VCC 4 8 VCC
LND712
MS_BS 3 9 BS
LND713
REG_GND 2 10 VSS
D REG_GND 1

LND714
SIGNAL PATH GND

VIDEO SIGNAL
AUDIO
CHROMA Y Y/CHROMA SIGNAL

REC

E PB

16

FP-704 4-61 4-62

 DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS FP-706 PRINTED WIRING BOARD

For Schematic Diagram

• Refer to page 4-95 for printed wiring board.

1 2 3 4 5 6 7 8 9

FP-706 FLEXIBLE
REMOCON SENSOR,MF SW
A XX MARK:NO MOUNT
NO MARK:REC/PB MODE R7607
R:REC MODE 680

P:PB MODE
R7601 R7602
56 56 D7608
SML-310LTT86
(TALLY)
C7602 R3.9
D7602
XX P2.3 Adjustment is needed when
B D7607
B DCZ2805
Camera recording
XX 3.0
D7609
LASER UNIT
D7610
XX
laser unit(D7609) is replaced.

Q7603
UN9211J-(K8).SO
LND762 LED DRIVE D7611 18P
Q7601,7602 XX
D7601 LED DRIVE
DCZ2805 CHASSIS GND 18 AF_LD
Remote sensor/ 17 AF_LD
Infrared ray emitter R7603 Q7602
68 R4.6 UN9211J-(K8).SO 16 AF_PD
P3.8
0 15 A_2.8V

C 4.2
R7604
14

13
F_TALLY_LED

SIRCS_PWM
Q7601 0 1k
12 IR_ON
2SC5585H-T2L
TO
11 MT_GND
VC-325 BOARD
10 MT_GND (15/17)
CN1001
9 MT_5V
D7605
8 MT_5V (PAGE 4-41
MA111-(K8).S0
of LEVEL3)
7 SIRCS_SIG

D IC7601 6 MF_B
R7605 5 MF_A
REMOTE COMMANDER RECEIVER 47
4 A_4.6V
3 MF_LED
C7601 4.5 3.0
4.7u 2 REG_GND
3 4
B 1 REG_GND
VCC OUT
PH7601
GND GND GP1S092HCPI
(MF SENSOR) R7606
1 2 IC7601 2 330
3
E SBX3055-01

4 1
PH7602
GP1S092HCPI
(MF SENSOR) Note : Note :
3 2 The components identified by Les composants identifiés par
mark 0 or dotted line with mark une marque 0 sont critiques
0 are critical for safety. pour la sécurité.
4 1 Replace only with part number Ne les remplacer que par une
D7606
specified. pièce portant le numéro spécifié.
XX
F
16

4-63 4-64 FP-706

DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS FP-707 PRINTED WIRING BOARD

For Schematic Diagram

• Refer to page 4-94 for printed wiring board of FP-707 board.

1 2 3 4 5 6 7 8 9 10 11 12 13

FP-707 FLEXIBLE
FLASH DRIVE CN4204 24P

A XX MARK:NO MOUNT
1 STROBO_DOWN
2 ST_GND
Q4201-4203,4206
NO MARK:REC/PB MODE FP-702 HIGH VOLTAGE CHARGER
3

4
ST_GND

PLUNGER

CN7201 16P
FLEXIBLE CN7202 16P CN4201 16P L4201
Q4202
CPH3109-TL-E D4205 5 PLUNGER
2.2uH 8.3 0 MA111-(K8).S0
STUNREG 1 1 STUNREG STUNREG 1 6 N.C.
STUNREG 2 2 STUNREG STUNREG 2 C4205 7 ST_GND
R4204 1u
B
STUNREG 3 3 STUNREG STUNREG 3 100k 8.2 8 ST_GND
R4209
T4201
B STUNREG

SCHARGE_ON
4 4 STUNREG STUNREG 4 C4210
1u
B
22k
D-D CONVERTOR
TRANSFORMER D4206
9 N.C.

5 5 SCHARGE_ON SCHARGE_ON 5 0 TP4201 10 N.C.

HAU160C030TP XX
XSCHARGE_FULL 6 6 XSCHARGE_FULL XSCHARGE_FULL 6 0 11 N.C. TO
C4202 4 6
ST_GND 7 7 ST_GND ST_GND 7 R4207 F 12 XE_K FLASH UNIT
TO 22u Q4203
100 16V (ST5000)
VC-325 BOARD CPH3109-TL-E CN001
ST_GND 8 8 ST_GND ST_GND 8 TA 0 3 13 XE_K
(15/17) R4210 S
CN1003 ST_GND 9 9 ST_GND ST_GND 9 Q4201 C4203
390 14 XE_K (PAGE 4-67)
UN9213J-(K8).SO 8.2 2
ST_GND 10 10 ST_GND ST_GND 10 4.7u 15 XE_K
(PAGE 4-41 0 B P 5
of LEVEL3) ST_GND 11 11 ST_GND ST_GND 11 16 XE_K
R4202 R4208
C PLUNGER

MT_5V
12 12 PLUNGER PLUNGER 12 4700 47
R4211
R4215
4700
17 N.C.

13 13 MT_5V MT_5V 13 18 N.C.

5600
C4204
MT_5V 14 14 MT_5V MT_5V 14 0.01u 19 N.C.
B
STROBO_DOWN 15 15 STROBO_DOWN STROBO_DOWN 15 20 XE_A
C4208
STROBO_ON 16 16 STROBO_ON STROBO_ON 16 80uF 21 XE_A
300V
22 XE_A

23 XE_A
2.7 0
5 24 XE_A
4

D FP-702 FLEXIBLE is replaced as a block. 0

1 3 0

C4207
So that this PRINTED WIRING BOARD is omitted. 1u
Q4206 2 B
XP1211-TXE

R4219 LND421 Q4208

XX
LND420 CHASSIS_GND IC4201 ,Q4208
GT8G132(TE12L)

270

6
7

8
CHASSIS_GND FLASH DRIVE

E IC4201
TND721MH5-S-TL-E

0 4.9

4
3

2
1
R4217

3
0 47 0

2
R4218

1
C4209
0.1u 1M
B

Note : Note :
The components identified by Les composants identifiés par
mark 0 or dotted line with mark une marque 0 sont critiques
0 are critical for safety. pour la sécurité.
Replace only with part number Ne les remplacer que par une
G specified. pièce portant le numéro spécifié.

16

FP-702/FP-707 4-65 4-66

 DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS

For Schematic Diagram

• Refer to page 4-97 for printed wiring board.
1 2 3 4 5 1 2 3 4 5 6 7 8

TO VC-325 BOARD(11/17)
FLASH UNIT(ST5000) CN2502
(PAGE 4-33 of LEVEL3)
A
CN001 24P
S001
(FLASH CLOSE) A

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27
1

9
STROBO_DOWN 1

27P

LM_LOAD

LM_LOAD

LM_UNLOAD

LM_UNLOAD

DEW+

DEW-

XMODE_SW_A

XMODE_SW_B

XMODE_SW_C

MODE_SW_COM/SW_GND

TAPE_TOP

XREC_PROOF

CHIME_VDD

CHIME_SDA

CHIME_SCK
MIC/REC_SW_GND/
XCCDOWN_SW_GND
XCCDOWN_SW

TAPE_LED_K

TAPE_LED_A

TAPE_END

END_GND

SREEL+

SREEL-

HALL_VCC

TREEL-

TREEL+

HALL_GND
ST_GND 2

ST_GND 3
RY001 (PLUNGER)
PLUNGER 4

PLUNGER 5
N.C. 6

B ST_GND 7

ST_GND 8

N.C. 9 B
N.C. 10 M902
TO N.C. 11
LOADING
MOTOR
M 8P
LM_LOAD 1
FP-707 FLEXIBLE
CN4204 XE_K 12
FP-467 LM_UNLOAD 2
(PAGE 4-66) XE_K 13 LND001
XE_K 14 XE_K FLEXIBLE S902
MODE
MODE_SW_COM 3
Vcc -
SWITCH XMODE_SW_A 4
C XE_K 15
XMODE_SW_B 5
+ G
XE_K 16
XMODE_SW_C 6
N.C.
N.C.
17
18
C DEW- 7 Q901
H901
S REEL
TAPE END SENSOR
R001 C002 L001 XENON DEW+ 8
N.C. 19 1M SENSOR
0.047u TUBE
1/8W B DEW
XE_A 20
XE_A 21
FP-228 SENSOR
Q902
TAPE TOP
Vcc -

XE_A 22 FLEXIBLE SENSOR

D901
(TAPE LED)
D XE_A
XE_A
23
24
LND002
XE_A S903
+ G

(CC DOWN) H902

T REEL

FLASH UNIT(ST5000) is replaced as a block. D SENSOR

So that this PRINTED WIRING BOARD is omitted.

E FP-468
MIC902

FLEXIBLE S901
(REC PROOF)
16
E
Note : Note :
The components identified by Les composants identifiés par 16
F mark 0 or dotted line with mark une marque 0 sont critiques
0 are critical for safety. pour la sécurité.
Replace only with part number Ne les remplacer que par une
specified. pièce portant le numéro spécifié.

4-67 4-68 FLASH UNIT (ST5000)/FP-467/468/228

DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS

1 2 3 4 5

CONTROL SWITCH BLOCK(FK5000) LND808

FUNCTION KEY CHASSIS GND

A
8P

REG_GND 8
CL
A_2.8V 7
WIDE
TO ZOOM_VR_AD 6 RV801
VF-158 BOARD KEY_AD0 5 ZOOM
(3/3)
CN105 REG_GND 4
(PAGE 4-58) REG_GND 3
TELE

B XRESET 2
D801
REG_GND 1 MA8062-M-TX

D803
MA8062-M-TX

S803
PHOTO(REC)

C
S804
R800
1200 PHOTO(FREEZE)

S805
R801
1500 FOCUS

D R802
2200
S802
R803 BACK LIGHT
3900

S801

R804
8200 NIGHT NIGHT
SHOT FRAMING

CONTROL SWITCH BLOCK(FK5000)

E is replaced as a block.
So that this PRINTED WIRING BOARD R805
27k
is omitted.

1
6
S800

RESET

D800
F MA8062-M-TX

16

CONTROL SWITCH BLOCK (FK5000) 4-69 4-70

 DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS

1 2 3 4 5 6 7 8

CONTROL SWITCH BLOCK(PS5000)

A POWER SW,LED
XX MARK:NO MOUNT JS901
XX

NO MARK:REC/PB MODE
R :REC MODE
D902 D901
P :PB MODE XX XX
S903 D903 D919
XX S904 XX S900
MODE
START/STOP (FLASH)

S902
B POWER

14P OFF(CHG)-ON
LND900
REG_GND 1
LND901
XS/S_SW 2
LND902
XPOWER_SW 3
LND903
XMODE_SW 4
LND904 JS902
XEJECT_SW 5
LND905
TO KEY_AD7 6
C VC-325 BOARD
(13/17)
SCHARGE_LED 7
LND906

LND907 R901
D906
CN1008 D_2.8V 8 470
LND908 REC-TAPE
CHARGE_LED 9
(PAGE 4-37 LND909 (GREEN) R902
of LEVEL3) EVER_3.0V 10 1k
LND910 D909
XVTR_LED 11
LND911 REC-MEMORY D911
XMEM_LED 12 D913
LND912 (GREEN) PLAYBACK-EDIT TLRMV1020(T15SOY,F)
XCAM_LED 13
LND913 (GREEN) ACCESS
MS_LED_ON 14
D R904
470
(RED)

D917 S901
TLAU1008(T05,SOY)
OPEN/ EJECT
CHG
R3.9
P4.4

0
Q904 R903
E DTC144EMT2L 470

D905
TLAU1008(T05,SOY)
(FLASH)

R3.6
P4.1

0
Q901
F DTC144EMT2L
LED DRIVE LND914
CHASSIS GND

16 CONTROL SWITCH BLOCK(PS5000) is replaced as a block.

So that this PRINTED WIRING BOARD is omitted.

4-71 4-72 CONTROL SWITCH BLOCK (PS5000)

 DCR-PC330/PC330E

COVER

4-3. PRINTED WIRING BOARDS

Link

BJ-005 BOARD VF-158 BOARD

FP-705 FLEXIBLE BOARD FP-704 FLEXIBLE BOARD

PD-198 BOARD FP-707 FLEXIBLE BOARD

AV-081 BOARD FP-706 FLEXIBLE BOARD

JK-257 BOARD FP-467/468/228 FLEXIBLE BOARD

COMMON NOTE FOR PRINTED WIRING BOARDS WAVEFORMS

MOUNTED PARTS LOCATION CIRCUIT BOARDS LOCATION FLEXIBLE BOARDS LOCATION

 DCR-PC330/PC330E

COVER 4-3. PRINTED WIRING BOARDS

THIS NOTE IS COMMON FOR WIRING BOARDS

(In addition to this, the necessary note is printed in each block)

(For printed wiring boards)

• : Uses unleaded solder. • Chip parts.
• : Pattern from the side which enables seeing. Transistor Diode
(The other layers’ patterns are not indicated) C 6 5 4 4 5 6 5 4 4 5 3 3 3 1 23
• Through hole is omitted.
• Circled numbers refer to waveforms.
B E 1 2 3 3 2 1 1 2 3 3 2 1 2 1 2 1 2 1 6 54
• There are a few cases that the part printed on diagram
1 2 2 1 3 4 1 2 3 4 4 3 3 4
isn’t mounted in this model.
• C: panel designation
5 4 3 3 4 5 2 1 4 3 2 1 1 2 2 1
5 4

1 3

BOARD INFORMATION
parts location waveform pattern
board name CSP IC
(shown on page) (shown on page) number of layers layers not shown
CD-452 4-101 4-97 4 2 to 3 IC7002
IC1201, 1301, 1501,
1601,1602, 1901, 2101,
VC-325 4-101, 102 4-97 8 2 to 7 2201, 2301, 2501, 2601,
2704, 2803, 2901, 3001,
3102
BT-021 4-103 – 2 – –
BJ-005 4-104 – 6 2 to 5 –
FP-705 – – 1 – –
PD-198 4-104 4-99 2 – –
AV-081 – – 6 2 to 5 –
JK-257 – – 2 – –
VF-158 4-104 4-100 6 2 to 5 –
FP-704 – – 1 – –
FP-707 – – 1 – –
FP-706 – – 1 – –

4-73
 DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION

BJ-005 (DC/USB/DV JACK) PRINTED WIRING BOARD • Refer to page 4-73 for common note for printed wiring board.
• : Uses unleaded solder.

BJ-005 BOARD(SIDE A) BJ-005 BOARD(SIDE B) Printed wiring board of the

CD-452, VC-325 and BT-021
A board are not shown. A
CN1006 Pages from 4-75 to 4-82 are
1 5 10 15 20 not shown.
CN1005 6 1
A K A
K
D1014 D1013

B B

C C

15 5 1 LD1001
CN1002
14 10 2

D D

1
6
4 CN1003
3
2 DV
1
5
2

5 1

LD1002

5 4
10

D1016
15

1 3
20

D1006 D1015 D1008

A
7
LF1001
25

3
4
30

KK
5

CN1004
2
1
D1003
45 35
CN1001

LF1002

E E
2
1
40

(USB)

BT1001
KA
3
4

1
50

A
55

D1002 D1009

2
6
60

D1007 K A
D1001
A
65

K A
D1012
70

K A

R1008
79 75

D1010
D1011

C1002 R1005
4 R1004 3

2 R1003 1
80

LF1003

5
2

1-689-790- 13
J1001 C1001
3

DC IN

F F
1
LD1003

1-689-790- 13

3
16
1 2 3 4 4 3 2 1 16

4-83 4-84 BJ-005

DCR-PC330/PC330E
Ver 1.1 2003. 11
COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION

FP-705 (PANEL SWITCH) FLEXIBLE BOARD PD-198 (RGB DRIVE, BACK LIGHT DRIVE) PRINTED WIRING BOARD • Refer to page 4-73 for common note for printed wiring board.
• Refer to page 4-73 for common note for printed wiring board. • : Uses unleaded solder.

• : Uses unleaded solder. PD-198 BOARD

LND601

CN605
A 6 1

R639
R623
2 1

4 3

S7501 1-689-799- 11
PANEL OPEN

R606
R605
C610
R641 CN600

C611
B C625 20 15 10 5 1

R612
C626 R608 R600

1
D605
R611

Q600
E C B
C

48
9 C628 C607

10
12
Q611

5
E

15 13
R602

L600
+

R645

3
Q612
A
R642

45
R616 L602

C601
L601

1
1

R651
R615 IC600 8 R648

C605
+ A

20
R614 C627

FB601
2 R646

40
7 C631
3
C604 C600

E C B
C

Q613
Q604

D604
R601R603
6

Q603

A
1

R622
C616
C618

25

30

3
R621

Q601
5 C630

37
24
S7502 C603 R652
2

3
R618

C606
C619
R654

R649

R604
C602
PANEL REVERSE

36
+

C609 +

C629 +
C615

1
A
4

35
R653

1
3

4
Q605
C617

1 1 6 1 6
FB600

R630
2 3 1 5 10 15 20 24
CN604 CN602 C624 R629 C623 CN606

1
3

1
D R619 R620

6
4

6
Q606 Q607 1-689-793- 11

16
1 2 3 4 5 6 7

FP-705/PD-198 4-85 4-86

 DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS

AV-081 (AV MULTI) PRINTED WIRING BOARD • Refer to page 4-73 for common note for printed wiring board.
• : Uses unleaded solder.

LND101

11

12
LND102

10 5 9 4 8 3 7 2 6 1
LND104 LND103
LND106
LND105 CN081 A/V
LND107 (AUDIO/VIDEO)
LND108
LND109

13

14
LND110

1-689-789- 13

JK-257 (HP/LANC/MIC JACK) PRINTED WIRING BOARD • Refer to page 4-73 for common note for printed wiring board.
• : Uses unleaded solder.

JK-257 BOARD(SIDE A) JK-257 BOARD(SIDE B)

FB432

C431
LND401
A VDR432 A
VDR434

R431
1 2
R432
J431
MIC
FB433

R422
5 1

R434 (PLUG IN POWER)

3
4
CN401
10

FB434
15

LND402
FB431
R421
22 20
23

VDR422

FB421
FB422

B 1 2 B
VDR423

J421
FB423

i (HEADPHONES)
1

3 VDR410
CN412

VDR424

4
5

FB424

VDR419
FB404 VDR417
10

1-689-792- 11

R413
VDR416
R405

FB401
1

FB402
VDR401

VDR411
5
C VDR415
C
D405

D402

R403
J401
3
(LANC)
LND403 2
4
1-689-792- 11
16
1 2 2 1 61

4-87 4-88 AV-081/JK-257

DCR-PC330/PC330E
Ver 1.1 2003. 11
COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION

VF-158 (RGB DRIVE, TIMING GENERATOR, BACK LIGHT, MIC AMP, CONNECTOR, PITCH/YAW SENSOR AMP) PRINTED WIRING BOARD • Refer to page 4-73 for common note for printed wiring board.
• : Uses unleaded solder.
VF-158 BOARD(SIDE A) VF-158 BOARD(SIDE B)

A K A K D501
A D500 A
R3502

C3502
C3505
R3503

C3510C3506

R3507
C3501
R3509
(YAW SENSOR)

R3510

R3508

C3507

11

10
R3505
SE3501

CN500
3 1 15 10 5

C3509

C3508

IC3501
16 1

C3512

C3511
15
B

P + C3504
SE3502
B

5
2

R3511
Q502

C3503
C501
(PITCH SENSOR) R3513

P +
Q503
6 4

R3512

R3514
C500 R3506 C3515
4 2 E C B

R503 R501

C3513
20
R509 1 3

3 2 1

R3515
R3501
R3504
C3514

IC500
R505

C502
B C E

R507
R508
TH500
1 2

4
Q501
L3501

C C
R3606
C3602
C3613
C3614

C3607

R3608 C3622 R3618 C3608 23 15 5 1 CN105

R104
R3601

R3631 CN101 1 5 8 C106

C3620

R3611

C3603 22 20 10 2

5 1
C3627

2
R3602 D102
C3606

R3614
+ P

C3626

1
R3626

C3623

R3612

R3615
C3635

R3628

C3617

10

10
C3628
R3620

C1662
C3618 FB1651
2 3
R3623

15
R3629
C3637
D
L3601

CN102
C3638 36

3
D 25

30 20

1
C1658
24
R3627

C3636

35 30 FB1650

5
+ P C3634

25
37 D103

CN107

2
35 FB101
R3604
R3624

40 36 25

C1656

C104

1
20

35

C1652
C3605
37 30 24
IC3601 4

40
C1653
C3632
R3625 C3633
C3631

P +

45 C1654 5 3

45
R3603 15 40 2 20 R1663
C1655 7

50

4
13 6 IC1650 R1664
48 5 10 12 1

C1651
59 55
C1663 R1665

C1650
R3621

+ P

CN104
C3629

1 R3632 45 8
60
C3612 P + 15

R110
C3616 C3625
C3619

R3610

C3630
R3613

R3617

1
C3611

R111
1 2 R1650 48 5 10 13
C3601 + P
R3609 C3621

1
E R3616 R3630 L1650
R1666
12
E

R1661
C3624

R3607 C3610 R3619 R1651

C1657 R1652 C1661
C3604

C105
C103
C3615

C1659
R1662
13 R1658 1-689-788- 13
1-689-788- C1660

16
1 2 3 4 5 6 6 5 4 3 2 1 16

VF-158 4-89 4-90

 DCR-PC330/PC330E
Ver 1.1 2003. 11
COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS

FP-704 (MS CONNECTOR) FLEXIBLE PRINTED WIRING BOARD FP-707 (FLASH DRIVE) FLEXIBLE PRINTED WIRING BOARD
• Refer to page 4-73 for common note for printed wiring board. • : Uses unleaded solder. • Refer to page 4-73 for common note for printed wiring board. • : Uses unleaded solder.
CN7401
15P 1P R4209
2 1 1 2
R4207 C4210

C4202

C4203
Q4201 2 1 R4210
2 1 1 2
R4204
D4205 1 C4204 2

B
R4202 2 1 3 3 2
2 1 Q4202 R4208
1 1 2

C4205
2

2
R4211
R4218
6

L4201
Q4203 5

D7402
D7401
5 1 2 3 4 7 Q4206 T4201

1
S7401

1
4 3

1
6 8

5 1 3 4 2

2
2 1
4 1

5
C4207

CN4201
S7401 S7402

2
C4209

R4217
BACK LIGHT DISPLAY/

10
R4215
BATT INFO Q4208

1
1 2
3 1
IC4201 1 2

15

16
5 8

LND714
D4206

LND703
4 5
3
LND701
1 5 10 15 20 24

1
R4219
CN4204

2
1-689-801- 11

LND420
LND702

2 1

C4208
LND704
LND705
LND706
LND707
LND708
LND709
LND710
LND711
LND712
LND713

1-689-798- 11

4-91 4-92 FP-704/FP-707

DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS

FP-706 (REMOCON SENSOR, MF SW) FLEXIBLE PRINTED WIRING BOARD • Refer to page 4-73 for common note for printed wiring board.
• : Uses unleaded solder.
FP-706 BOARD (SIDE A) FP-706 BOARD (SIDE B)

2 D7609
3 LASER UNIT
1

Q7602
1

1
D7611

D7610
2

2
D7607

C7601
D7608
3

1
D7602 R7607 Q7603

2
R7601 2

R7602 2

R7604
2 1

2
1

1
Q7601

C7602
2
LND762

R7605

1
1 2

D7606
1 1 3 R7603

1
3 D7601 IC7601

2
D7605
2 2 4
1
R7606
2

4
3

2 PH7602
1

4
3
2
1 PH7601

LND763
LND764
LND765
LND766
LND767
LND768
LND769
LND770

LND772
LND773
LND774
LND775
LND776
LND777
LND778
LND779
LND780
LND771
1-689-800- 11 1 18

1-689-800- 11

Note: Adjustment is needed when laser unit (D7609) is replaced. Refer

to “24. AF Laser Output Adjustment”, “25. AF Laser Axis Check
(1)” and “26. AF Laser Axis Check (2)” of SERVICE MANUAL,
ADJ (987627251.pdf).

FP-706 4-93 4-94

 DCR-PC330/PC330E

COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS

FP-467/468/228 FLEXIBLE PRINTED WIRING BOARD (MD BLOCK) • Refer to page 4-73 for common note for printed wiring board.
• : Uses unleaded solder.
Q902
TAPE TOP
SENSOR

FP-468 FLEXIBLE BOARD 27

1
H902 S903
H901 T REEL (C. C. DOWN)
S REEL SENSOR
SENSOR
1
Q901
TAPE END 8
SENSOR
12
S901
(REC PROOF) 1-686-799-

MIC902

D901
(TAPE LED)
S902
MODE SWITCH

M902
LOADING
MOTOR
M
FP-228
FLEXIBLE BOARD

DEW
SENSOR
11 1
1-677-049-

FP-467 FLEXIBLE BOARD 1-686-798- 11

4-95 4-96 FP-467/468/228

 DCR-PC330/PC330E

COVER PD-198 PRINTED WIRING BOARD

4-4. WAVEFORMS

PD-198 BOARD

1 IC600 ql 6 IC600 el

7.4 Vp-p 400m Vp-p

2H
H

2 IC600 w; 7 IC600 r;

400m Vp-p
7.4 Vp-p
2H H

3 IC600 wa 8 IC600 rs

3.0 Vp-p
7.4 Vp-p
2H V

4 IC600 wg 9 IC600 rd

5.0 Vp-p
3.0 Vp-p

2H H

5 IC600 ek

330m Vp-p

Waveforms of the CD-452 and VC-325 boar ds

are not sho wn.
Pages fr om 4-97 to 4-98 are not sho wn.

4-99 PD-198
DCR-PC330/PC330E

COVER VF-158 PRINTED WIRING BOARD

VF-158 BOARD

1 IC1650 ql 5 IC1650 el

470m Vp-p
7.3 Vp-p
2H H

2 IC1650 w; 6 IC1650 r;

470m Vp-p
7.3 Vp-p H

2H

3 IC1650 wa 7 IC1650 rs

7.3 Vp-p 2.9 Vp-p

2H V

4 IC1650 ek 8 IC1650 rd

2.9 Vp-p
470m Vp-p
H H

VF-158 4-100
DCR-PC330/PC330E

COVER 4-3. PRINTED WIRING BOARDS

4-5. MOUNTED PARTS LOCATION no mark : side A

* mark : side B
BJ-005 BOARD PD-198 BOARD VF-158 BOARD
* BT1001 E-2 C600 C-6 * C103 E-3 * CN101 D-4 R3612 D-4
C601 C-5 * C104 D-3 * CN102 D-3 R3613 E-4
* C1001 F-3 C602 C-5 * C105 E-3 * CN104 E-3 R3614 D-4
* C1002 F-3 C603 C-5 * C106 D-3 * CN105 D-3 R3615 D-4
C604 C-5 C500 B-4 CN107 D-6 R3616 E-4
CN1001 E-1 C605 C-5 C501 B-4 CN500 B-4 R3617 E-4
CN1002 D-3 C606 C-4 C502 B-4 R3618 D-4
CN1003 D-4 C607 B-7 * C1650 E-4 * D102 D-3 R3619 E-4
CN1004 E-4 C609 C-4 * C1651 E-4 * D103 D-3 R3620 D-4
CN1005 A-3 C610 B-4 * C1652 D-4 D500 A-4 R3621 E-4
* CN1006 A-3 C615 C-3 * C1653 D-4 D501 A-4 R3623 D-4
C616 C-3 * C1654 D-4 R3624 D-4
D1001 E-3 C617 D-1 * C1655 E-4 * FB101 D-3 R3625 E-4
D1002 E-3 C618 C-3 * C1656 D-3 * FB1650 D-4 R3626 D-3
D1003 E-3 C619 C-2 * C1657 E-4 * FB1651 D-4 R3627 D-3
* D1006 E-3 C623 D-6 * C1658 D-4 R3628 D-3
* D1007 E-3 C624 D-5 * C1659 E-4 * IC1650 E-4 R3629 D-3
* D1008 E-3 C625 B-4 * C1660 E-4 * IC3501 B-1 R3630 E-4
* D1009 E-3 C626 B-4 * C1661 E-4 IC3601 D-4 R3631 D-4
* D1010 E-3 C627 C-7 * C1662 D-3 IC500 B-4 R3632 E-4
* D1011 F-3 C628 C-6 * C1663 E-5
* D1012 E-3 C629 C-4 * C3501 B-1 * L1650 E-5 SE3501 B-2
* D1013 A-3 C630 C-6 * C3502 B-2 * L3501 B-2 SE3502 B-1
* D1014 A-3 C631 C-7 * C3503 B-2 L3601 D-5
* D1015 E-3 * C3504 B-1 TH500 B-4
D1016 E-3 CN600 B-6 * C3505 B-2 Q501 B-4
CN602 D-4 * C3506 B-1 Q502 B-4
J1001 F-4 CN604 D-3 * C3507 B-2 Q503 B-4
CN605 A-2 * C3508 B-2
LF1001 E-3 CN606 D-7 * C3509 B-2 * R104 D-4
LF1002 E-3 * C3510 B-1 * R110 E-3
LF1003 F-3 D604 C-3 * C3511 B-1 * R111 E-3
D605 B-4 * C3512 B-1 R501 B-4
R1003 F-3 * C3513 B-1 R503 B-4
R1004 F-3 FB600 D-6 * C3514 B-2 R505 B-4
* R1005 F-3 FB601 C-3 * C3515 B-2 R507 B-4
* R1008 E-3 C3601 E-3 R508 B-4
IC600 C-5 C3602 D-3 R509 B-4
C3603 D-3 * R1650 E-4
L600 C-6 C3604 E-3 * R1651 E-4
L601 C-3 C3605 D-3 * R1652 E-4
L602 C-7 C3606 D-3 * R1658 E-4
C3607 D-5 * R1661 E-4
Q600 B-7 C3608 C-4 * R1662 E-4
Q601 C-7 C3610 E-3 * R1663 D-3
Q603 C-1 C3611 E-3 * R1664 E-3
Q604 C-2 C3612 E-3 * R1665 E-3
Q605 D-1 C3613 D-3 * R1666 E-4
Q606 D-5 C3614 D-3 * R3501 B-1
Q607 D-6 C3615 E-3 R3502 A-2
Q611 B-4 C3616 E-3 R3503 B-2
Q612 C-7 C3617 D-4 * R3504 B-1
Q613 C-7 C3618 D-3 * R3505 B-2
C3619 E-3 * R3506 B-2
R600 B-7 C3620 D-4 * R3507 B-1
R601 C-6 C3621 E-4 * R3508 B-2
R602 C-5 C3622 D-4 * R3509 B-1
R603 C-7 C3623 D-4 * R3510 B-2
R604 C-6 C3624 E-4 * R3511 B-2
R608 B-4 C3625 E-4 * R3512 B-2
R611 B-4 C3626 D-4 * R3513 B-1
R612 B-4 C3627 D-4 * R3514 B-1
R614 C-4 C3628 D-4 * R3515 B-1
R615 C-4 C3629 E-4 R3601 D-3
R616 C-4 C3630 E-4 R3602 D-3
R618 C-1 C3631 D-4 R3603 D-3
R619 D-1 C3632 D-4 R3604 D-3
R620 D-1 C3633 D-4 R3606 D-3
R621 C-2 C3634 D-4 R3607 E-3
R622 C-2 C3635 D-3 R3608 D-4
R623 A-1 C3636 D-3 R3609 E-4
R629 D-6 C3637 D-3 R3610 E-4
R630 D-5 C3638 D-3 R3611 D-4
R639 A-1
R641 B-4
R642 B-4
R645 C-7
R646 C-7
R648 C-7
R649
R651
C-6
C-7
Mounted parts location of the CD-452, VC-325 and
R652 C-7 BT-021 boards are not shown.
R653 C-7
R654 C-7 Pages from 4-101 to 4-103 are not shown.

BJ-005/PD-198/VF-158 4-104E
 DCR-PC330/PC330E

COVER NOTE

5. REPAIR PARTS LIST

NOTE: Characters A to Z of the electrical parts list indicate location of exploded views in which the desired part is shown.

Link EXPLODED VIEWS

A B C

OVERALL CABINET (R) SECTON-1 CABINET (R) SECTION-2 CABINET (L) SECTION-1

D E F G

CABINET (L) SECTION-2 EVF SECTION STROBOSCOPE SECTION LENS SECTION

OVERALL LS CHASSIS MECHANICAL CHASSIS

(MECHANISM DECK-Z101) BLOCK ASSEMBLY BLOCK ASSEMBLY

Link ELECTRICAL PARTS LIST ACCESSORIES

AV-081 BOARD D FP-706 FLEXIBLE BOARD G VF-158 BOARD E

BJ-005 BOARD A FP-707 FLEXIBLE BOARD F BT-021 BOARD A

FP-704 FLEXIBLE BOARD A JK-257 BOARD D CD-452 BOARD G

FP-705 FLEXIBLE BOARD B PD-198 BOARD B VC-325 BOARD C

 DCR-PC330/PC330E

COVER 5. REPAIR PARTS LIST

NOTE:
• -XX, -X mean standardized parts, so they may have some differences from When indicating parts by reference number,
the original one. please include the board name.
• Items marked “*” are not stocked since they are seldom required for routine
service. Some delay should be anticipated when ordering these items. The components identified by mark 0 or
• The mechanical parts with no reference number in the exploded views are not dotted line with mark 0 are critical for safety.
supplied. Replace only with part number specified.
• Due to standardization, replacements in the parts list may be different from Les composants identifiés par une marque
the parts specified in the diagrams or the components used on the set. 0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
• CAPACITORS:
le numéro spécifié.
uF: µF
• COILS
uH: µH
• RESISTORS
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F: nonflammable
• SEMICONDUCTORS
In each case, u: µ, for example:
uA...: µA... , uPA... , µPA... ,
uPB... , µPB... , uPC... , µPC... ,
uPD..., µPD...
• Abbreviation
CND : Canadian model
AUS : Australian model
CH : Chinese model
EE : East European model
HK : Hong Kong model
KR : Korea model
JE : Tourist model

5-1
 DCR-PC330/PC330E

COVER 5. REPAIR PARTS LIST

5-1. EXPLODED VIEWS

5-1-1. OVERALL
ns : not supplied

8
Cabinet (L) section-1, 2
(See page 5-6, 5-7)
15 7
1 9
2

5 1 Cabinet (R) section

(See page 5-4, 5-5)
12

1
ns 13 1
4

2
1
1 1 10

14 11 16
ns 1

6 3
(Note)
14

Note: When you use the lens hood, use the small lens cap.

Ref. No. Part No. Description Ref. No. Part No. Description
1 3-080-198-11 SCREW(M1.7),LOCK ACE,P2 9 3-080-198-31 SCREW(M1.7),LOCK ACE,P2
2 3-080-204-01 SCREW, TAPPING, P2 10 3-085-314-01 LID, CPC
3 X-3953-685-2 COVER (F) ASSY, JACK 11 3-085-319-01 CUSHION (A), BB RETAINER
4 X-3953-715-1 CABINET (F) ASSY (PC330E) 12 3-085-920-01 SHEET (VC), CD RADIATION
4 X-3953-778-1 CABINET (F) ASSY (PC330) 13 3-085-897-01 LABEL,FUSE REPLACEMENT CAUTION

5 X-3952-743-1 CAP ASSY, LENS (SMALL) 14 3-979-194-12 STRING, CAP

6 X-3949-944-1 CAP ASSY, LENS (LARGE) 15 3-085-916-01 SHEET, PROTECTION, VF
7 1-478-204-11 SWITCH BLOCK, CONTROL (PS5000) 16 3-057-482-01 COVER, BATTERY
8 X-3953-719-1 CABINET (REAR) ASSY

5-3
DCR-PC330/PC330E

COVER 5. REPAIR PARTS LIST

5-1-2. CABINET (R) SECTION-1

ns : not supplied
57 Cabinet (R) section-2
SP901 56 (See page 5-5)

54

66
55
52
66 59

51
BT9901
60
59
61
51 51
66
ns 65
67
53
62
70
68
ns

64
51 63

69 51

: BT9901 (Lithium battery) BT-021 board on the mount position.

(See page 4-82 of LEVEL 3)

CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.

Ref. No. Part No. Description Ref. No. Part No. Description
51 3-078-890-01 SCREW, TAPPING 62 1-689-797-11 FP-703 FLEXIBLE BOARD
52 X-3953-676-1 RETAINER ASSY, SPEAKER 63 A-7111-353-A BJ-005 BOARD, COMPLETE
53 3-078-890-21 SCREW, TAPPING 64 3-085-301-01 DC, JACK RETAINER
54 A-7111-355-A FP-704 BOARD, COMPLETE 65 X-3953-683-1 BLIND ASSY, HINGE
55 1-816-271-21 MEMORY STICK CONNECTOR 10P 66 3-085-397-01 SCREW

56 3-085-291-01 SWITCH, INDICATION SELECTION 67 3-085-294-01 RETAINER, BT TERMINAL

57 3-085-290-01 KNOB, LCD BACK LIGHT 68 3-085-297-01 FRAME, BOTTOM
59 3-078-889-11 SCREW (M1.7) 69 3-085-298-01 SCREW, TRIPOD
60 A-7111-414-A BT-021 (A) BOARD, COMPLETE 70 X-3953-810-2 FRAME ASSY, BOTTOM
61 3-080-198-41 SCREW(M1.7),LOCK ACE,P2 SP901 1-825-262-11 LOUD SPEAKER (1.6CM)

5-4
 DCR-PC330/PC330E

COVER 5. REPAIR PARTS LIST

5-1-3. CABINET (R) SECTION-2

ns : not supplied
117
118 119
116
B

108
ns
114

112

115
120
113

102
111
B

121

114
107 103
106
110 103 105
PD
109 19 - LCD901
8

A ND901
104

101
Ref. No. Part No. Description Ref. No. Part No. Description
101 X-3953-716-1 CABINET (R) ASSY, LCD 113 3-085-300-01 COVER (FRONT), HINGE
102 3-080-198-11 SCREW(M1.7),LOCK ACE,P2 114 CAUTION TAPE (A)
103 3-078-889-11 SCREW (M1.7) 115 X-3953-680-1 HINGE ASSY
104 A-7111-357-A PD-198 BOARD, COMPLETE 116 3-078-890-01 SCREW, TAPPING
105 3-085-308-01 SHEET, PROTECTION, PANEL 117 A-7111-356-A FP-705 BOARD, COMPLETE

106 X-3953-679-1 CABINET (L) ASSY, LCD 118 3-085-299-01 COVER (REAR), HINGE
107 1-962-478-21 HARNESS (PB-053) 119 3-084-817-11 GRIP
108 X-3953-717-1 CABINET (R) ASSY 120 3-085-309-01 RETAINER, DC JACK
109 4-223-676-11 SCREW (1.7), MI 121 3-085-917-01 SHEET, PROTECTION, BT FLEXIBLE
110 3-085-316-01 SHEET (PANEL) LCD901 8-753-052-41 ACX500DMM-J

111 3-085-263-01 FOOT, RUBBER 0 ND901 1-477-759-11 BLOCK LIGHT GUIDE PLATE (2.5)
112 3-085-260-01 CUSHION, PANEL

Note : Note :
CAUTION : The components identified by Les composants identifiés par
mark 0 or dotted line with mark une marque 0 sont critiques
For the parts of 114: TAPE (A) (3-941-343-01) cut
0 are critical for safety. pour la sécurité.
WOVEN (T0.25), FABRIC NON (3-076-631-01) into Replace only with part number Ne les remplacer que par une
the desired length and use it. specified. pièce portant le numéro spécifié.
5-5
DCR-PC330/PC330E

COVER 5. REPAIR PARTS LIST

5-1-4. CABINET (L) SECTION-1

ns : not supplied

Stroboscope section
154 (See page 5-9)

154
EVF section
G (See page 5-8)
Cabinet (L) section-2
(See page 5-7)

156

155
ns 152
163
153 151
E D G
C
Mechanism deck B
158
(See page 5-11 to 5-13) 151 166 161
A

F D
E C
157 160 A B

152 166
Lens section
(See page 5-10) -
151 164 VC5
3 2 F
159

162 151
151
165

Ref. No. Part No. Description Ref. No. Part No. Description
151 3-078-889-11 SCREW (M1.7) 159 3-059-718-01 SCREW (M1.4X1.5)
152 3-085-319-01 CUSHION (A), BB RETAINER 160 3-085-318-01 CUSHION (A), BB RETAINER
153 3-085-312-01 KNOB, BATTERY LOCK 161 1-689-796-11 FP-702 FLEXIBLE BOARD
154 3-080-198-11 SCREW(M1.7),LOCK ACE,P2 162 A-7111-419-A VC-325 (A) BOARD, COMPLETE (SERVICE)
155 1-689-794-11 FP-700 FLEXIBLE BOARD 163 3-086-658-01 SPRING, COMPRESSION

156 3-078-890-01 SCREW, TAPPING 164 3-086-698-01 SHEET (A), VC ELECTROSTATIC

157 3-081-221-01 LABEL (Z), LS 165 CAUTION TAPE (A)
158 X-3953-682-1 FRAME ASSY, MD 166 3-087-175-01 SPACER, VC

CAUTION :
For the parts of 114: TAPE (A) (3-941-343-01) cut
WOVEN (T0.25), FABRIC NON (3-076-631-01) into
the desired length and use it.
5-6
 DCR-PC330/PC330E

COVER 5. REPAIR PARTS LIST

5-1-5. CABINET (L) SECTION-2

ns : not supplied
ns 211

208 209
212
210 204

213

201
206

ns 204
201 ns

204

201 214
207

203
204
202
201
204

215
205

Ref. No. Part No. Description Ref. No. Part No. Description
201 3-080-198-11 SCREW(M1.7),LOCK ACE,P2 209 X-3953-684-1 COVER (AV) ASSY, JACK
202 X-3953-718-2 CABINET (G) ASSY 210 X-3953-720-1 CABINET (L) ASSY
203 3-085-366-01 FOOT (G), RUBBER 211 A-7111-350-A AV-081 BOARD, COMPLETE
204 3-078-890-01 SCREW, TAPPING 212 A-7111-351-A JK-257 BOARD, COMPLETE
205 3-085-315-01 KNOB, GRIP LOCK 213 3-078-889-11 SCREW (M1.7)

206 3-085-352-11 BELT, GRIP 214 X-3953-681-1 ARM ASSY, G

207 X-3953-376-1 GRIP ASSY, HOLD 215 3-973-497-91 SCREW (M1.7), 0-NO. +P 2
208 1-478-203-21 SWITCH BLOCK, CONTROL (FK5000)

5-7
DCR-PC330/PC330E

COVER 5. REPAIR PARTS LIST

5-1-6. EVF SECTION

ns : not supplied
ns 256

254

252 ns

251 251
253
251
ns
252
251
LCD902
263
258
259 257
260
255

261
251

262

Ref. No. Part No. Description Ref. No. Part No. Description
251 3-078-889-11 SCREW (M1.7) 258 3-069-976-01 CUSHION (2), LCD
252 3-080-198-11 SCREW(M1.7),LOCK ACE,P2 259 3-085-347-01 HOLDER, BACK LIGHT
253 X-3953-678-1 GUIDE ASSY, SLEEVE 260 3-062-205-11 CUSHION (B), BL
254 X-3953-687-1 RING ASSY, VF REGULATION 261 3-069-940-01 SHEET METAL, BL RETAINER
255 1-476-810-11 BLOCK(0.44), LIGHT GUIDE PLATE 262 A-7111-345-A VF-158 BOARD, COMPLETE

256 X-3953-677-1 LENS ASSY, VF 263 3-087-338-01 SHEET, VF LIGHT

257 3-085-350-01 CUSHION (044), LCD LCD902 8-753-036-72 LCX033ANA-1

5-8
 DCR-PC330/PC330E

COVER 5. REPAIR PARTS LIST

5-1-7. STROBOSCOPE SECTION

ns : not supplied

308
318
309

A
B 310

MIC901
307 301

303 317
312
311
316

306 317
A
301
B 314 319

305 312
313
304 ns 315
302

C4208
301

Ref. No. Part No. Description Ref. No. Part No. Description
311 3-085-310-01 FRAME, HOT SHOE
301 3-078-889-11 SCREW (M1.7) 312 3-085-313-01 SCREW
302 A-7111-347-A FP707 BOARD, COMPLETE 313 3-078-890-01 SCREW, TAPPING
303 3-085-307-01 CABINET, BLIND 314 1-689-795-11 FP-701 FLEXIBLE BOARD
304 3-080-204-21 SCREW, TAPPING, P2 315 3-973-497-91 SCREW (M1.7), 0-NO. +P 2
305 X-3953-750-1 COVER ASSY, UNIT 316 3-085-324-01 SHEET, INSULATING, CONDENSER

306 X-3953-675-1 STROBOSCOPE ASSY 317 3-085-389-01 CUSHION (STROBOSCOPE)

0 307 1-478-205-11 LUMINOUS UNIT, STROBOSCOPE (ST5000) 318 3-052-245-01 BOLT (M1.4)
308 3-085-306-01 CABINET, STROBOSCOPE 319 3-083-904-01 CUSHION, MICROPHONE
309 1-793-996-11 CONNECTOR, EXTERNAL 0 C4208 1-100-296-21 CAP, ELECT 80MF (80uF/310V)
310 3-085-303-01 CABINET (UPPER) MIC901 1-542-553-11 MIC UNIT (MIC5000)

Note : Note :
The components identified by Les composants identifiés par
mark 0 or dotted line with mark une marque 0 sont critiques
0 are critical for safety. pour la sécurité.
Replace only with part number Ne les remplacer que par une
specified. pièce portant le numéro spécifié.
5-9
DCR-PC330/PC330E
Ver 1.2 2004. 09
COVER 5. REPAIR PARTS LIST

5-1-8. LENS SECTION

ns : not supplied
368 ns
366
353
364

354
367
357 351
355
D7601
D7602 IC7001
D7609 359
(Note) ns
ns
353 365 356
360
ns ns
363
351
369
360
ns
ns 358
ns 359
370

351

362
M904
371

351
361
352 361

Note :
Adjustment is needed when laser unit (D7609) is replaced. Be sure to read “Precautions upon replacing CCD imager”
Refer to “24. AF Laser Output Adjustment”, “25. AF Laser on page 4-12 of LEVEL 3 when changing the CCD imager.
Axis Check (1)” and “26. AF Laser Axis Check (2)” of
SERVICE MANUAL, ADJ (987627251.pdf).

Ref. No. Part No. Description Ref. No. Part No. Description
351 3-078-890-21 SCREW, TAPPING 364 3-086-492-01 SHEET, CDF
352 X-3953-674-1 RING ASSY, MF 365 3-085-932-01 CUSHION, VIBRATION PROOF
353 3-078-889-11 SCREW (M1.7) 366 3-085-914-01 SHEET (A), SHIELD, CD
354 A-7111-364-A FP-706 BOARD, COMPLETE 367 3-085-293-01 COVER, GUIDE, LIGHT
355 3-085-311-01 FRAME, IR 368 3-078-890-01 SCREW, TAPPING

356 1-758-992-11 OPTICAL FILTER BLOCK 369 3-086-814-01 TAPE, VIBRATION PROOF
357 A-7111-363-A CD-452 BOARD, COMPLETE (PC330) 370 3-087-340-01 SHEET (SMALL), CDF
357 A-7111-412-A CD-452 (A) BOARD, COMPLETE (PC330E) 371 3-085-913-01 SHEET, MD FLEXIBLE GUARD
358 8-848-773-01 DEVICE, LENS LSV-870A D7601 8-719-079-78 DIODE DCZ2805
359 3-078-297-01 TAPPING (M1.4) D7602 8-719-079-78 DIODE DCZ2805

360 1-477-458-11 SENSOR, GMR (M) 0 D7609 1-804-947-11 LASER UNIT

361 3-713-791-35 SCREW (M1.7X5), TAPPING, P2 IC7001 A-7111-386-A CCD BLOCK ASSY (CCD IMAGER)
362 1-758-989-11 IRIS (IR870) M904 1-787-042-11 MOTOR, STEPPING Z870A (ZOOM)
363 3-085-918-01 SHEET (L) (LARGE),CD RADIATION

Note : Note :
The components identified by Les composants identifiés par
mark 0 or dotted line with mark une marque 0 sont critiques
0 are critical for safety. pour la sécurité.
Replace only with part number Ne les remplacer que par une
specified. pièce portant le numéro spécifié.
5-10
 DCR-PC330/PC330E

COVER 5. REPAIR PARTS LIST

5-1-9. OVERALL (MECHANISM DECK-Z101)

ns : not supplied

703

704 707
711

705

706

710
707
709 712

708
702

M901
LS chassis block assembly
(See page 5-12)

Mechanical chassis
701 block assembly
(See page 5-13)

715

713

714

Ref. No. Part No. Description Ref. No. Part No. Description
701 X-3952-938-5 GEAR ASSY, GOOSENECK 709 3-079-364-01 RETAINER, LS GUIDE
702 3-075-097-11 SCREW (M1.4X1.4), SPECIAL HEAD 710 X-3952-937-1 TABLE ASSY, T REEL
703 3-079-206-02 SPRING (POP UP S), TXTENSION 711 3-079-366-01 RELEASE, REEL LOCK
704 X-3952-939-3 COMPARTMENT ASSY, CASSETTE 712 X-3953-257-1 PLATE ASSY,RETAINER
705 3-079-367-01 DAMPER, CASSETTE COMPARTMENT 713 A-7095-393-A MD (Z100) SUB ASSY

706 3-079-215-02 SPRING (POP UP T), EXTENSION 714 3-079-741-02 SCREW,DRUM FIXING
707 3-085-330-01 SCREW, SPECIAL 715 3-748-682-01 WASHER, T
708 3-080-545-01 COVER, SENSOR S M901 A-7048-992-A DRUM (DEH-30D-R)

5-11
DCR-PC330/PC330E

COVER 5. REPAIR PARTS LIST

5-1-10. LS CHASSIS BLOCK ASSEMBLY

ns : not supplied
765
762
761 766
MIC902
Q901
763
774 ns
760

D901 FP-468
(Note)

769
759 773
H901 Q902 770
758 768
H902
771
S903 764

757 772
767

756

755 754

753
ns
752

751 Note: FP-468 is included in the LS block assy and is attached

to chassis by hot-press.
Because installation of FP-468 requires a very high
accuracy, FP-468 is not supplied as an independent
service parts.

Ref. No. Part No. Description Ref. No. Part No. Description
751 A-7095-402-E BRAKE (T) BLOCK ASSY 767 3-079-243-02 SPRING (PINCH RETURN), TORSION
752 3-079-241-01 PLATE, LS CAM 768 X-3952-934-1 ARM ASSY, PINCH
753 3-075-097-11 SCREW (M1.4X1.4), SPECIAL HEAD 769 3-052-062-02 NUT, TG7
754 3-079-246-01 SPRING(RELEASE RACK),EXTENSION 770 3-079-219-02 TG7
755 3-079-248-01 POSITIONING(S), CASSETTE 771 3-081-591-01 SPRING, COMPRESSION (TG7)

756 3-079-244-01 SPRING (ULE), EXTENSION 772 X-3952-935-3 ARM ASSY, TG7
757 X-3952-932-1 BRAKE ASSY, ULE 773 3-079-237-01 ADJUSTOR, BAND
758 3-079-245-01 RACK (S), RELEASE 774 A-7095-403-B TG2 ARM BLOCK ASSY
759 3-079-247-01 BRAKE (S) D901 6-500-652-01 DIODE GL453SE0000F (TAPE LED)
760 3-059-090-11 SCREW (M1.4X2.5), SPECIAL HEAD H901 8-719-067-74 ELEMENT, HOLE HW-105A-CDE-T (S REEL)

761 3-079-242-01 SPRING, TENSION (TENSION REGULATOR) H902 8-719-067-74 ELEMENT, HOLE HW-105A-CDE-T (T REEL)
762 A-7095-401-A LS BLOCK ASSY MIC902 1-817-175-12 PIN, CONNECTOR (WITH DETECTION SWITCH)
763 3-079-267-01 HOLDER (S), SENSOR Q901 6-550-672-01 TRANSISTOR PT4850FJE00F (TAPE END)
764 3-079-268-01 HOLDER (T), SENSOR Q902 6-550-672-01 TRANSISTOR PT4850FJE00F (TAPE TOP)
765 X-3952-936-2 TABLE ASSY, S REEL S903 1-529-566-51 SWITCH, PUSH (1 KEY) (C.C.DOWN)

766 3-085-330-01 SCREW, SPECIAL

5-12
 DCR-PC330/PC330E

COVER 5. REPAIR PARTS LIST

5-1-11. MECHANICAL CHASSIS BLOCK ASSEMBLY

ns : not supplied 827

809
813
806 M902
816

S902 822 820

814
811 812 815

829
816 821
810
819 830
825

826
817 823
807
818
808
824

828

805 ns

803

804 802
ns
801

Ref. No. Part No. Description Ref. No. Part No. Description
801 3-079-314-01 SPRING (EJ), EXTENSION 817 3-079-308-01 SHAFT, WORM
802 3-079-327-01 ARM, EJ 818 3-079-309-01 GEAR, DECELERATION
803 3-079-323-01 GEAR, CONVERSION 819 X-3952-942-2 ROLLER ASSY, TG3
804 3-079-324-03 ARM, GL DRIVING 820 3-079-325-01 RAIL, GUIDE
805 X-3952-928-1 GL (S) ASSY 821 3-079-295-02 SPRING, TG5

806 3-079-315-01 ROLLER (S1), LS GUIDE 822 1-677-049-11 FP-228 FLEXIBLE BOARD
807 X-3952-925-1 ARM ASSY, LS 823 3-079-328-01 SCREW (M1.4), SPECIAL HEAD
808 3-079-320-01 ROLLER, LS 824 3-079-326-02 SUPPORT, TG7
809 3-079-316-01 ROLLER (S2), LS GUIDE 825 3-079-301-01 SPRING (GLT), TORSION
810 3-079-319-01 GEAR, CAM 826 3-079-298-01 GEAR (T), GL

811 X-3952-941-1 SLIDER ASSY, M 827 1-686-798-11 FP-467 FLEXIBLE BOARD

812 3-079-321-02 SPRING (PINCH), EXTENSION 828 X-3952-927-2 COASTER (S) ASSY
813 X-3952-940-2 PLATE ASSY, TG2 CAM 829 X-3952-930-3 ROLLER ASSY, TG5
814 3-079-312-01 SHIELD, MOTOR 830 X-3952-929-5 COASTER (T) ASSY
815 3-079-307-02 HOLDER, MOTOR M902 A-7095-396-A MOTOR BLOCK ASSY, L (LOARDING)

816 3-085-330-01 SCREW, SPECIAL S902 1-477-679-11 ROTARY, ENCODER (MODE SWITCH)

5-13
DCR-PC330/PC330E
AV-081 BJ-005 FP-704 FP-705 FP-706 FP-707

5-2. ELECTRICAL PARTS LIST

Ref. No. Part No. Description Ref. No. Part No. Description
A-7111-350-A AV-081 BOARD, COMPLETE A-7111-356-A FP-705 BOARD, COMPLETE
********************** **********************

< CONNECTOR > S7501 1-786-148-11 SWITCH, PUSH (1 KEY) (PANEL OPEN)
S7502 1-786-179-31 SWITCH, PUSH (1KEY) (PANEL REVERSE)
CN081 1-815-794-21 CONNECTOR (MULTIPLE) ************************************************************
************************************************************
A-7111-364-A FP-706 BOARD, COMPLETE
A-7111-353-A BJ-005 BOARD, COMPLETE **********************
********************** (D7601, 7602 and D7609 is not included in this
complete board.)
< BATTERY >
< CAPACITOR >
BT1001 1-694-990-11 BATTERY TERMINAL BOARD
C7601 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V
< CAPACITOR >
< DIODE >
C1001 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C1002 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V D7601 8-719-079-78 DIODE DCZ2805
D7602 8-719-079-78 DIODE DCZ2805
< CONNECTOR > D7605 8-719-073-01 DIODE MA111-(K8).S0
D7608 8-719-064-07 DIODE SML-310LTT86
CN1001 1-816-925-11 CONNECTOR BOARD TO BOARD 80P 0 D7609 1-804-947-11 LASER UNIT
CN1002 1-815-330-11 CONNECTOR, FPC (ZIF) 15P
CN1003 1-794-276-11 CONNECTOR, SQUARE TYPE 4P ( DV) < IC >
CN1004 1-794-962-11 CONNECTOR, SQUARE TYPE(USB 5P) ( USB)
CN1005 1-794-997-11 PIN, CONNECTOR 20P IC7601 8-742-221-00 HYB IC SBX3055-01

CN1006 1-816-654-11 FFC/FPC CONNECTOR (LIF) 6P < PHOTO INTERRUPTER >

< DIODE > PH7601 8-749-016-83 IC GP1S092HCPI (MF SENSOR)

PH7602 8-749-016-83 IC GP1S092HCPI (MF SENSOR)
D1001 8-719-056-61 DIODE MAZS082008SO
D1002 8-719-158-49 DIODE MA8120-TX < TRANSISTOR >
D1003 8-719-158-49 DIODE MA8120-TX
D1006 8-719-056-61 DIODE MAZS082008SO Q7601 8-729-049-92 TRANSISTOR 2SC5585H-T2L
D1007 8-719-056-61 DIODE MAZS082008SO Q7602 8-729-037-72 TRANSISTOR UN9211J-(K8).SO
Q7603 8-729-037-72 TRANSISTOR UN9211J-(K8).SO
D1008 8-719-056-61 DIODE MAZS082008SO
D1009 8-719-056-61 DIODE MAZS082008SO < RESISTOR >
D1010 8-719-056-61 DIODE MAZS082008SO
D1011 8-719-158-49 DIODE MA8120-TX R7601 1-216-019-00 METAL CHIP 56 5% 1/10W
D1012 8-719-158-49 DIODE MA8120-TX R7602 1-216-019-00 METAL CHIP 56 5% 1/10W
R7603 1-216-807-11 METAL CHIP 68 5% 1/16W
D1015 8-719-056-61 DIODE MAZS082008SO R7604 1-216-821-11 METAL CHIP 1K 5% 1/16W
D1016 6-500-750-01 DIODE NSAD500H-T1-A R7605 1-216-805-11 METAL CHIP 47 5% 1/16W

< JACK > R7606 1-216-815-11 METAL CHIP 330 5% 1/16W

R7607 1-216-819-11 METAL CHIP 680 5% 1/16W
J1001 1-817-361-11 DC-IN CONNECTOR (DC IN) ************************************************************

< LINE FILTER > A-7111-347-A FP-707 BOARD, COMPLETE

**********************
LF1001 1-428-914-11 INDUCTOR 0uH (C4208 is not included in this complete board.)
LF1002 1-428-914-11 INDUCTOR 0uH
LF1003 1-411-957-11 FILTER, COMMON MODE < CAPACITOR >

< RESISTOR > C4202 1-119-751-11 TANTAL. CHIP 22uF 20% 16V
C4203 1-115-566-11 CERAMIC CHIP 4.7uF 10% 10V
R1005 1-218-953-11 RES-CHIP 1K 5% 1/16W C4204 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
R1008 1-218-990-11 SHORT CHIP 0 C4205 1-109-982-11 CERAMIC CHIP 1uF 10% 10V
************************************************************ C4207 1-109-982-11 CERAMIC CHIP 1uF 10% 10V

A-7111-355-A FP-704 BOARD, COMPLETE 0 C4208 1-100-296-21 CAP, ELECT 80MF (80uF/310V)
********************** C4209 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C4210 1-165-908-11 CERAMIC CHIP 1uF 10% 10V
< SWITCH >
Note : Note :
The components identified by Les composants identifiés par
S7401 1-762-650-21 SWITCH, SLIDE (BACK LIGHT)
mark 0 or dotted line with mark une marque 0 sont critiques
S7402 1-771-138-82 SWITCH, KEY BOARD (DISPLAY/BATTERY INFO) 0 are critical for safety. pour la sécurité.
************************************************************ Replace only with part number Ne les remplacer que par une
specified. pièce portant le numéro spécifié.
5-14
 DCR-PC330/PC330E
FP-707 JK-257 PD-198

Ref. No. Part No. Description Ref. No. Part No. Description
< CONNECTOR > FB423 1-500-444-11 FERRITE 0uH
FB424 1-500-444-11 FERRITE 0uH
CN4201 1-816-646-11 FFC/FPC CONNECTOR (LIF) 16P FB431 1-469-581-21 FERRITE 0uH
CN4204 1-785-905-11 CONNECTOR, FFC/FPC (ZIF) 24P FB432 1-469-581-21 FERRITE 0uH
FB433 1-469-581-21 FERRITE 0uH
< DIODE >
FB434 1-469-581-21 FERRITE 0uH
D4205 8-719-073-01 DIODE MA111-(K8).S0
0 D4206 6-500-237-01 DIODE HAU160C030TP < JACK >

< IC > J401 1-793-995-11 JACK, SUPER SMALL TYPE ( LANC)

J421 1-569-950-41 JACK (SMALL TYPE) (i HEADPHONES)
IC4201 6-703-635-01 IC TND721MH5-S-TL-E J431 1-691-737-41 JACK (SMALL TYPE) (MIC(PLUG IN POWER))

< COIL > < RESISTOR >

L4201 1-412-027-11 INDUCTOR 2.2uH R403 1-216-864-11 METAL CHIP 0 5% 1/16W

R405 1-216-864-11 METAL CHIP 0 5% 1/16W
< TRANSISTOR > R413 1-216-864-11 METAL CHIP 0 5% 1/16W
R421 1-216-864-11 METAL CHIP 0 5% 1/16W
Q4201 8-729-037-74 TRANSISTOR UN9213J-(K8).SO R422 1-216-864-11 METAL CHIP 0 5% 1/16W
Q4202 8-729-048-75 TRANSISTOR CPH3109-TL-E
Q4203 8-729-048-75 TRANSISTOR CPH3109-TL-E R431 1-216-864-11 METAL CHIP 0 5% 1/16W
Q4206 8-729-426-24 TRANSISTOR XP1211-TXE R432 1-218-990-11 SHORT CHIP 0
Q4208 8-729-053-74 TRANSISTOR GT8G132(TE12L) R434 1-218-990-11 SHORT CHIP 0

< RESISTOR > < VARISTOR >

R4202 1-216-829-11 METAL CHIP 4.7K 5% 1/16W VDR401 1-801-923-11 VARISTOR, CHIP (1608)
R4204 1-216-845-11 METAL CHIP 100K 5% 1/16W VDR410 1-803-974-21 VARISTOR, CHIP (1608)
R4207 1-216-809-11 METAL CHIP 100 5% 1/16W VDR411 1-803-974-21 VARISTOR, CHIP (1608)
R4208 1-216-805-11 METAL CHIP 47 5% 1/16W VDR415 1-803-974-21 VARISTOR, CHIP (1608)
R4209 1-216-837-11 METAL CHIP 22K 5% 1/16W VDR416 1-803-974-21 VARISTOR, CHIP (1608)

R4210 1-216-816-11 METAL CHIP 390 5% 1/16W VDR417 1-803-974-21 VARISTOR, CHIP (1608)
R4211 1-216-830-11 METAL CHIP 5.6K 5% 1/16W VDR419 1-803-974-21 VARISTOR, CHIP (1608)
R4215 1-216-829-11 METAL CHIP 4.7K 5% 1/16W VDR422 1-801-862-11 VARISTOR, CHIP (1608)
R4217 1-216-805-11 METAL CHIP 47 5% 1/16W VDR423 1-801-862-11 VARISTOR, CHIP (1608)
R4218 1-216-857-11 METAL CHIP 1M 5% 1/16W VDR424 1-801-862-11 VARISTOR, CHIP (1608)

< TRANSFORMER > VDR432 1-801-862-11 VARISTOR, CHIP (1608)

VDR434 1-801-862-11 VARISTOR, CHIP (1608)
0 T4201 1-437-532-11 TRANSFORMER, DC-DC CONVERTER ************************************************************
************************************************************
A-7111-357-A PD-198 BOARD, COMPLETE
A-7111-351-A JK-257 BOARD, COMPLETE ***********************
**********************
< CAPACITOR >
< CAPACITOR >
C600 1-119-750-11 TANTAL. CHIP 22uF 20% 6.3V
C431 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V C601 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C602 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
< CONNECTOR > C603 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C604 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
CN401 1-816-595-31 CONNECTOR, FPC (ZIF) 23P
CN412 1-691-348-11 CONNECTOR, FFC/FPC (ZIF) 10P C605 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C606 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
< DIODE > C609 1-107-688-11 TANTAL. CHIP 1.5uF 20% 25V
C610 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
D402 8-719-056-85 DIODE UDZSTE-178.2B C611 1-164-739-11 CERAMIC CHIP 560PF 5% 50V
D405 8-719-056-85 DIODE UDZSTE-178.2B
C615 1-115-566-11 CERAMIC CHIP 4.7uF 10% 10V
< FERRITE BEAD > C616 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C617 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
FB401 1-500-444-11 FERRITE 0uH C618 1-165-908-11 CERAMIC CHIP 1uF 10% 10V
FB402 1-500-444-11 FERRITE 0uH C619 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
FB404 1-469-581-21 FERRITE 0uH
FB421 1-469-581-21 FERRITE 0uH
FB422 1-500-444-11 FERRITE 0uH
Note : Note :
The components identified by Les composants identifiés par
mark 0 or dotted line with mark une marque 0 sont critiques
0 are critical for safety. pour la sécurité.
Replace only with part number Ne les remplacer que par une
specified. pièce portant le numéro spécifié.
5-15
DCR-PC330/PC330E
PD-198 VF-158

Ref. No. Part No. Description Ref. No. Part No. Description
C624 1-164-939-11 CERAMIC CHIP 0.0022uF 10% 50V R648 1-218-950-11 RES-CHIP 560 5% 1/16W
C627 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V R649 1-218-937-11 RES-CHIP 47 5% 1/16W
C628 1-119-750-11 TANTAL. CHIP 22uF 20% 6.3V R651 1-218-953-11 RES-CHIP 1K 5% 1/16W
R652 1-218-959-11 RES-CHIP 3.3K 5% 1/16W
< CONNECTOR > R654 1-218-990-11 SHORT CHIP 0
************************************************************
CN600 1-794-997-11 PIN, CONNECTOR 20P
CN602 1-691-344-11 CONNECTOR, FFC/FPC (ZIF) 6P A-7111-345-A VF-158 BOARD, COMPLETE
CN604 1-785-905-11 CONNECTOR, FFC/FPC (ZIF) 24P **********************
CN606 1-691-344-11 CONNECTOR, FFC/FPC (ZIF) 6P
< CAPACITOR >
< DIODE >
C103 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
D604 8-719-050-42 DIODE RD3.3UM-T1B C104 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C106 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V
< FERRITE BEAD > C500 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C501 1-164-505-11 CERAMIC CHIP 2.2uF 16V
FB600 1-414-760-21 FERRITE 0uH
FB601 1-414-760-21 FERRITE 0uH C1624 1-127-895-91 TANTAL. CHIP 22uF 20% 4V
C1650 1-127-895-91 TANTAL. CHIP 22uF 20% 4V
< IC > C1651 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C1652 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
IC600 8-752-115-66 CXA3622BR-T4 C1653 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

< COIL > C1654 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C1655 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
L600 1-469-525-91 INDUCTOR 10uH C1656 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
L602 1-414-771-91 INDUCTOR 10uH C1658 1-113-986-11 TANTAL. CHIP 2.2uF 20% 25V
C1659 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
< TRANSISTOR >
C1660 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
Q600 8-729-037-61 TRANSISTOR UN9113J-(K8).SO C1661 1-164-739-11 CERAMIC CHIP 560PF 5% 50V
Q601 8-759-054-48 TRANSISTOR UP04601008S0 C1662 1-115-566-11 CERAMIC CHIP 4.7uF 10% 10V
Q603 8-759-054-48 TRANSISTOR UP04601008S0 C3501 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
Q604 8-759-054-48 TRANSISTOR UP04601008S0 C3502 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
Q605 8-729-041-23 TRANSISTOR NDS356AP
C3503 1-127-895-91 TANTAL. CHIP 22uF 20% 4V
Q606 8-729-427-12 TRANSISTOR XP4111-TXE C3504 1-127-895-91 TANTAL. CHIP 22uF 20% 4V
Q607 8-729-427-42 TRANSISTOR XP4211-TXE C3505 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10V
Q612 8-759-054-48 TRANSISTOR UP04601008S0 C3506 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10V
Q613 8-729-042-26 TRANSISTOR 2SB1462J-QR(K8).SO C3507 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10V

< RESISTOR > C3508 1-137-710-11 CERAMIC CHIP 10uF 20% 6.3V
C3509 1-137-710-11 CERAMIC CHIP 10uF 20% 6.3V
R600 1-218-959-11 RES-CHIP 3.3K 5% 1/16W C3510 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10V
R601 1-208-691-11 METAL CHIP 2.2K 0.5% 1/16W C3511 1-137-710-11 CERAMIC CHIP 10uF 20% 6.3V
R602 1-218-949-11 RES-CHIP 470 5% 1/16W C3512 1-137-710-11 CERAMIC CHIP 10uF 20% 6.3V
R603 1-218-965-11 RES-CHIP 10K 5% 1/16W
R604 1-208-643-11 METAL CHIP 22 0.5% 1/16W C3514 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V
C3601 1-107-819-11 CERAMIC CHIP 0.022uF 10% 16V
R605 1-218-990-11 SHORT CHIP 0 C3602 1-127-988-81 CERAMIC CHIP 15000PF 10% 16V
R606 1-218-990-11 SHORT CHIP 0 C3603 1-107-819-11 CERAMIC CHIP 0.022uF 10% 16V
R608 1-218-975-11 RES-CHIP 68K 5% 1/16W C3604 1-127-988-81 CERAMIC CHIP 15000PF 10% 16V
R611 1-208-707-11 METAL CHIP 10K 0.5% 1/16W
R612 1-208-935-11 METAL CHIP 100K 0.5% 1/16W C3605 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C3606 1-127-895-91 TANTAL. CHIP 22uF 20% 4V
R614 1-208-635-11 RES-CHIP 10 5% 1/16W C3610 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V
R615 1-208-635-11 RES-CHIP 10 5% 1/16W C3611 1-117-919-11 TANTAL. CHIP 10uF 20% 6.3V
R616 1-208-635-11 RES-CHIP 10 5% 1/16W C3612 1-164-874-11 CERAMIC CHIP 100PF 5% 50V
R618 1-218-965-11 RES-CHIP 10K 5% 1/16W
R619 1-218-990-11 SHORT CHIP 0 C3613 1-164-874-11 CERAMIC CHIP 100PF 5% 50V
C3614 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V
R620 1-218-977-11 RES-CHIP 100K 5% 1/16W C3616 1-164-874-11 CERAMIC CHIP 100PF 5% 50V
R621 1-218-965-11 RES-CHIP 10K 5% 1/16W C3617 1-164-874-11 CERAMIC CHIP 100PF 5% 50V
R622 1-216-847-11 METAL CHIP 150K 5% 1/16W C3619 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
R645 1-218-963-11 RES-CHIP 6.8K 5% 1/16W
R646 1-218-969-11 RES-CHIP 22K 5% 1/16W

5-16
 DCR-PC330/PC330E
VF-158

Ref. No. Part No. Description Ref. No. Part No. Description
C3620 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V R505 1-218-959-11 RES-CHIP 3.3K 5% 1/16W
C3621 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V R507 1-208-643-11 METAL CHIP 22 0.5% 1/16W
C3623 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V R508 1-208-643-11 METAL CHIP 22 0.5% 1/16W
C3625 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V R1651 1-218-990-11 SHORT CHIP 0
C3626 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V R1652 1-218-990-11 SHORT CHIP 0

C3628 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V R1658 1-218-975-11 RES-CHIP 68K 5% 1/16W
C3629 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V R1661 1-208-707-11 METAL CHIP 10K 0.5% 1/16W
C3631 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V R1662 1-208-935-11 METAL CHIP 100K 0.5% 1/16W
C3632 1-127-895-91 TANTAL. CHIP 22uF 20% 4V R1663 1-208-635-11 RES-CHIP 10 5% 1/16W
C3633 1-165-128-11 CERAMIC CHIP 0.22uF 16V R1664 1-208-635-11 RES-CHIP 10 5% 1/16W

C3634 1-127-895-91 TANTAL. CHIP 22uF 20% 4V R1665 1-208-635-11 RES-CHIP 10 5% 1/16W
C3635 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V R3501 1-218-990-11 SHORT CHIP 0
C3636 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V R3502 1-218-990-11 SHORT CHIP 0
C3637 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V R3503 1-218-990-11 SHORT CHIP 0
C3638 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V R3504 1-218-990-11 SHORT CHIP 0

< CONNECTOR > R3505 1-218-990-11 SHORT CHIP 0

R3506 1-218-990-11 SHORT CHIP 0
CN101 1-816-595-31 CONNECTOR, FPC (ZIF) 23P R3507 1-218-969-11 RES-CHIP 22K 5% 1/16W
CN102 1-794-767-31 FFC/FPC CONNECTOR (LIF) 10P R3508 1-218-969-11 RES-CHIP 22K 5% 1/16W
CN104 1-794-376-21 PIN, CONNECTOR 4P R3509 1-218-969-11 RES-CHIP 22K 5% 1/16W
CN105 1-816-655-11 FFC/FPC CONNECTOR (LIF) 8P
CN107 1-816-873-11 CONNECTOR BOARD TO BOARD 60P R3510 1-218-969-11 RES-CHIP 22K 5% 1/16W
R3511 1-218-989-11 RES-CHIP 1M 5% 1/16W
CN500 1-691-354-21 CONNECTOR, FFC/FPC (ZIF) 16P R3512 1-218-965-11 RES-CHIP 10K 5% 1/16W
R3513 1-218-965-11 RES-CHIP 10K 5% 1/16W
< DIODE > R3514 1-218-989-11 RES-CHIP 1M 5% 1/16W

D102 6-500-289-01 DIODE MAZW082H0LS0 R3601 1-218-968-11 RES-CHIP 18K 5% 1/16W

D103 6-500-289-01 DIODE MAZW082H0LS0 R3602 1-218-971-11 RES-CHIP 33K 5% 1/16W
D500 6-500-371-01 DIODE NSCW215T-TC5 R3603 1-218-965-11 RES-CHIP 10K 5% 1/16W
D501 6-500-371-01 DIODE NSCW215T-TC5 R3604 1-218-961-11 RES-CHIP 4.7K 5% 1/16W
R3606 1-218-957-11 RES-CHIP 2.2K 5% 1/16W
< FERRITE BEAD >
R3607 1-218-957-11 RES-CHIP 2.2K 5% 1/16W
FB101 1-469-581-21 FERRITE 0uH R3608 1-218-963-11 RES-CHIP 6.8K 5% 1/16W
FB1650 1-414-760-21 FERRITE 0uH R3609 1-218-963-11 RES-CHIP 6.8K 5% 1/16W
FB1651 1-414-760-21 FERRITE 0uH R3610 1-218-953-11 RES-CHIP 1K 5% 1/16W
R3611 1-218-953-11 RES-CHIP 1K 5% 1/16W
< IC >
R3615 1-218-969-11 RES-CHIP 22K 5% 1/16W
IC500 8-759-581-11 IC NJM2125F(TE2) R3617 1-218-969-11 RES-CHIP 22K 5% 1/16W
IC1650 8-752-109-93 IC CXM3008R-T4 R3620 1-218-966-11 RES-CHIP 12K 5% 1/16W
IC3501 8-759-489-19 IC uPC6756GR-8JG-E2 R3621 1-218-966-11 RES-CHIP 12K 5% 1/16W
IC3601 8-759-638-50 IC AN2901FHQEBV R3623 1-218-954-11 RES-CHIP 1.2K 5% 1/16W

< COIL > R3624 1-218-971-11 RES-CHIP 33K 5% 1/16W

R3625 1-218-968-11 RES-CHIP 18K 5% 1/16W
L1650 1-469-570-11 INDUCTOR 10uH R3626 1-208-912-11 METAL CHIP 11K 0.5% 1/16W
L3501 1-469-570-11 INDUCTOR 10uH R3627 1-208-701-11 METAL CHIP 5.6K 0.5% 1/16W
L3601 1-469-528-91 INDUCTOR 100uH R3629 1-208-912-11 METAL CHIP 11K 0.5% 1/16W

< TRANSISTOR > R3630 1-218-990-11 SHORT CHIP 0

R3631 1-218-990-11 SHORT CHIP 0
Q501 8-729-042-26 TRANSISTOR 2SB1462J-QR(K8).SO R3632 1-218-971-11 RES-CHIP 33K 5% 1/16W
Q502 8-729-427-83 TRANSISTOR XP6501-(TX).SO
Q503 8-729-042-59 TRANSISTOR UN9112J-(K8).SO < SENSOR >

< RESISTOR > SE3501 1-476-807-31 SENSOR, ANGULAR VELOCITY (YAW SENSOR)
SE3502 1-476-807-41 SENSOR, ANGULAR VELOCITY (PITCH SENSOR)
R104 1-218-953-11 RES-CHIP 1K 5% 1/16W ************************************************************
R110 1-218-990-11 SHORT CHIP 0
R111 1-218-990-11 SHORT CHIP 0
R501 1-208-939-11 METAL CHIP 150K 0.5% 1/16W
R503 1-208-719-11 METAL CHIP 33K 0.5% 1/16W

5-17
DCR-PC330/PC330E
BT-021 CD-452 VC-325

Ref. No. Part No. Description

A-7111-414-A BT-021 (A) BOARD, COMPLETE
*************************

************************************************************

A-7111-363-A CD-452 BOARD, COMPLETE (PC330)

A-7111-412-A CD-452 (A) BOARD, COMPLETE (PC330E)
**********************************

************************************************************

A-7111-419-A VC-325 (A) BOARD, COMPLETE (SERVICE)

**********************************
************************************************************

Electrical parts list of the BT-021, CD-452

and VC-325 board are not shown.
Pages from 5-18 to 5-27 are not shown.
DCR-PC330/PC330E

Checking supplied accessories.

Make sure that the following accessories are supplied with your camcorder.

USB cable (1)

Lens cap (Small, 1) 1-823-931-11 Cleaning cloth (1)
X-3952-743-1 3-073-861-01
AC Adaptor (1) When you use the lens hood, use the
0 1-477-533-32 small lens cap.

21-pin adaptor (1)

(PC330E:AEP,UK,EE model)
1-770-783-21
Lens hood (1) String, Cap (1)
3-085-395-01 3-979-194-12 Rechargeable battery pack (1)
Power cord (Main lead) (1)
(NP-FM30)
(PC330E:AUS model)
A-7096-387-A
0 1-696-819-21
(PC330:US,CND model)
Power cord (Main lead) (1)
Rechargeable battery pack (1)
(PC330:KR model)
(NP-FM30)
0 1-776-985-11
A-7096-388-A 2-pin conversion adaptor (1)
Power cord (Main lead) (1)
(PC330:E,JE,KR model/ (PC330:JE model/
(PC330:E model/
PC330E model) PC330E:JE model)
PC330E:AEP,EE,E model)
0 1-769-608-11 1-569-007-12
Battery Holder (1)
Power cord (Main lead) (1)
3-083-973-01
(PC330E:UK,HK model)
0 1-783-374-11
Power cord (Main lead) (1) Wireless Remote Commander (1)
(PC330:US,CND model) (RMT-831)
0 1-790-107-22 1-477-898-41
Power cord (Main lead) (1) 2-pin conversion adaptor (1)
Battery terminal cover (1)
(PC330:JE model (PC330:E model/
3-057-482-01
/PC330E:JE model) PC330E:E,HK model)
0 1-790-732-12 1-569-008-12
Power cord (Main lead) (1)
(PC330E:CH model) A/V connecting cable (1)
• Abbreviation
0 1-782-476-13 (AV multi) (1.5m)
CND : Canadian model
1-823-156-12 CD-ROM AUS : Australian model
(SPVD-010 USB Driver) (1) CH : Chinese model
(PC330:E,JE,KR model/PC330E) EE : East European model
3-078-942-05 HK : Hong Kong model
Lens cap (Large, 1) CD-ROM KR : Korea model
X-3949-944-1 Memory stick (1) (MSA-16A) (SPVD-010 (I) USB Driver) (1) JE : Tourist model
(not supplied) (PC330:US,CND model)
3-078-943-05
Other accessories
3-084-863-11 MANUAL, INSTRUCTION (ENGLISH) 3-084-945-21 COMPUTER APPLICATIONS GUIDE
(PC330:US,CND,E,JE) (TRADITIONAL CHINESE) (PC330:E/PC330E:HK)
3-084-863-21 MANUAL, INSTRUCTION (FRENCH) (PC330:CND) 3-084-945-31 COMPUTER APPLICATIONS GUIDE
3-084-863-31 MANUAL, INSTRUCTION (SIMPLILIED CHINESE) (PC330E:CH,E,JE)
(SPANISH/PORTUGUESE) (PC330:E,JE) 3-084-945-41 COMPUTER APPLICATIONS GUIDE (RUSSIAN)
3-084-863-41 MANUAL, INSTRUCTION (TRADITIONAL CHINESE) (PC330E:E,JE)
(PC330:E) 3-084-945-51 COMPUTER APPLICATIONS GUIDE (KOREAN)
3-084-863-51 MANUAL, INSTRUCTION (KOREAN) (PC330:JE,KR) (PC330:JE,KR)
3-084-946-11 MANUAL, INSTRUCTION (FOR COMPUTER)(ENGLISH)
3-084-863-61 MANUAL, INSTRUCTION (ARABIC) (PC330:E) (PC330:US,CND,E,JE/PC330E:AEP,UK,E,HK,AUS,CH,JE)
3-084-864-11 MANUAL, INSTRUCTION (ENGLISH/FRENCH)
(PC330E:AEP,UK,E,HK,AUS,CH,JE) 3-084-946-21 MANUAL, INSTRUCTION (FOR COMPUTER)(FRENCH)
3-084-864-21 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE) (PC330:CND/PC330E:AEP,E,JE)
(PC330E:AEP) 3-084-946-31 MANUAL, INSTRUCTION (FOR COMPUTER)
3-084-864-31 MANUAL, INSTRUCTION (ITALIAN/GREEK) (PC330E:AEP) (GERMAN/DUTCH)(PC330E:AEP)
3-084-864-41 MANUAL, INSTRUCTION (GERMAN/DUTCH) 3-084-946-41 MANUAL, INSTRUCTION (FOR COMPUTER)
(PC330E:AEP) (SPANISH/PORTUGUESE)(PC330:E,JE/PC330E:AEP)
3-084-946-51 MANUAL, INSTRUCTION (FOR COMPUTER)
3-084-864-51 MANUAL, INSTRUCTION (RUSSIAN) (PC330E:E,JE) (ITALIAN/GREEK)(PC330E:AEP)
3-084-864-61 MANUAL, INSTRUCTION (ARABIC/PERSIAN) (PC330E:E)
3-084-864-71 MANUAL, INSTRUCTION (TRADITIONAL CHINESE) Note : Note :
(PC330E:HK) The components identified by Les composants identifiés par
3-084-864-81 MANUAL, INSTRUCTION (SIMPLILIED CHINESE) mark 0 or dotted line with mark une marque 0 sont critiques
(PC330E:CH,E,JE) 0 are critical for safety. pour la sécurité.
3-084-945-11 COMPUTER APPLICATIONS GUIDE (ARABIC/PERSIAN) Replace only with part number Ne les remplacer que par une
specified. pièce portant le numéro spécifié.
(PC330:E/PC330E:E)

5-28E
DCR-PC330/PC330E

Sony EMCS Co. 2004I1600-1

9-876-272-31 ©2004.9
— 132 — Published by DI Technical Support Section
 COVER

[Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)]

Toolbar

Printing a text Moving with link

1. Click the Print button .
1. Select either palm tool , zoom tool , text selection tool
2. Specify a printer, print range, number of copies, and other op-
tions, and then click [OK]. , or graphic selection tool .
2. Place the pointer in the position in a text where the link exists
(such as a button on cover and the table of contents page, or
Application of printing:
blue characters on the removal flowchart page or drawing
To set a range to be printed within a page, select the graphic
page), and the pointer will change to the forefinger form .
selection tool and drag on the page to enclose a range to 3. Then, click the link. (You will go to the link destination.)
be printed, and then click the Print button.

Moving with bookmark:

Click an item (text) on the bookmark pallet, and you can move
Finding a text to the link destination. Also, clicking can display the
1. Click the Find button . hidden items.
2. Enter a character string to be found into a text box, and click (To go back to original state, click )
the [Find]. (Specify the find options as necessary)
3. Open the find dialog box again, and click the [Find Again] and
you can find the matched character strings displayed next.
(Character strings entered previously are displayed as they are
in the text box.)

Application to the Service Manual:

The parts on the drawing pages (block diagrams, circuit dia-
grams, printed circuit boards) and parts list pages in a text
can be found using this find function. For example, find a
Ref. No. of IC on the block diagram, and click the [Find Again] Zooming or rotating the screen display
continuously, so that you can move to the Ref. No. of IC on “Zoom in”
the circuit diagram or printed circuit board diagram succes- • Select the zoom tool and click the page.
sively. • Select the zoom tool and drag a range to be zoomed in.
Note: The find function may not be applied to the Service
Manual depending on the date of issue.
“Zoom out”
• Select the zoom-out tool and click the page.

Switching a page • Select the zoom-out tool and drag a range to be zoomed
• To move to the first page, click the . out.

• To move to the last page, click the .

“Zoom in/out”
• To move to the previous page, click the . • Click the triangle button in the zoom control box to select the
• To move to the next page, click the . display magnification. Or, you may click or for zoom-
ing in or out.

Reversing the screens displayed once

• To reverse the previous screens (operation) one by one, click
the .
• To advance the reversed screens (operation) one by one, click “Rotate”
the . • Click rotate tool , and the page then rotates 90 degrees each.

Application to the Service Manual: Application to the Service Manual:

The printed circuit board diagram you see now can be changed
This function allows you to go and back between circuit dia-
to the same direction as the set.
gram and printed circuit board diagram, and accordingly it
will be convenient for the voltage check.
Reverse 987627233.pdf

Revision History

S.M. Rev.
Ver. Date History Contents
issued
1.0 2003.09 Official Release — —
1.1 2003.11 Correction-1 Correction of self-diagnosis code table and Yes
printed wiring boards
S.M. Correction: Page 1-5E, 4-85, 4-89, 4-92
1.2 2004.09 Correction-2 Correction of repair parts list Yes
S.M. Correction: Page 5-10