Scribd
Upload
78 views2 pages

AQ Elite Aluminum Capacitors 2450/35

The document provides specifications for aluminum electrolytic capacitors in the AQ Series, including their temperature range, voltage range, capacitance range and tolerance, dissipation factor, leakage current, endurance, shelf life, permissible ripple current, frequency multipliers, dimensions, and conformance to industry standards.

Uploaded by

zuigh899g
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
78 views2 pages

AQ Elite Aluminum Capacitors 2450/35

The document provides specifications for aluminum electrolytic capacitors in the AQ Series, including their temperature range, voltage range, capacitance range and tolerance, dissipation factor, leakage current, endurance, shelf life, permissible ripple current, frequency multipliers, dimensions, and conformance to industry standards.

Uploaded by

zuigh899g
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

A L U M I N U M E L E C T R O LY T I C C A PA C I T O R S

AQ Series
High ripple current capability.
High stability.

SPECIFICATIONS
Item Performance Characteristics
Category Temperature Range -25 ~ +85℃
Working Voltage Range 400 ~ 450Vdc
Capacitance Range 330 ~820μF
Capacitance Tolerance ±20% (at 25℃ and 120Hz)

Dissipation Factor Rated Voltage (V) 400 420 450


(tanδ)
(at 25℃, 120Hz) tanδ(Max) 0.15 0.15 0.15

I= CV or 3000μA, whichever is smaller.


Leakage Current I : Leakage current (μA) C : Rated capacitance (μF) V : Rated voltage (V)
Impress the rated voltage for 5 minutes.

The following requirements shall be satisfied when the capacitor are restored to 25℃ after the rated
voltage applied for 3,000 hours at 85℃.
Capacitance change ≦ ±20% of the initial value
Endurance
Dissipation factor(tanδ) ≦ 200% of the specified value
Leakage current ≦ specified value

The following requirements shall be satisfied when the capacitor are restored to 25℃ after the rated
voltage applied for 1,000 hours at 85℃ without voltage applied.
Capacitance change ≦ ±20% of the initial value
Shelf Life
Dissipation factor(tanδ) ≦ 200% of the specified value
Leakage current ≦ 200% of the specified value

Others Conforms to JIS-C-5101-4 (1998), characteristic W.

DIMENSIONS (mm)
A L U M I N U M E L E C T R O LY T I C C A PA C I T O R S

AQ Series
Case size & Permissible rated ripple current (mA rms) 120Hz / 85℃:
Vdc 400 420 450

ФD Ф30 Ф35 Ф30 Ф35 Ф30 Ф35

uF ФD×L RC ФD×L RC ФD×L RC ФD×L RC ФD×L RC ФD×L RC

330 30×40 1500 35×35 1500 30×40 1350 35×35 1350 30×45 1250 35×40 1250

360 30×40 1600 35×35 1600 30×40 1450 35×35 1450 30×50 1350 35×40 1350

390 30×40 1700 35×35 1700 30×45 1550 35×40 1550 35×45 1450

420 30×45 1800 35×40 1800 30×50 1700 35×40 1700 35×45 1550

440 30×50 1900 35×40 1900 30×50 1900 35×45 1900 35×50 1700

470 30×50 2000 35×40 2000 35×45 2050 35×50 1800

510 35×45 2150 35×50 2150 35×58 2000

560 35×50 2300 35×50 2300

620 35×50 2450 35×58 2400

680 35×50 2600

820 35×58 2850

RIPPLE CURRENT MULTIPLIERS


Frequency Multipliers

Frequency (Hz)
Vdc
60 120 360 1K 10K

400 ~ 450 0.80 1.00 1.10 1.20 1.30

You might also like