Project:

Customer:
Engineer:
Pump Manufacturer:

Technical Data
Submittal Document
GPx Series
Full Service
Electric Fire Pump Controller

Contents:
Data Sheets
Dimensional Data
Wiring Schematics
Field Connections

MEMBER
2019 -2020 MEMBER
2019 -2020

Note: The drawings included in this package are for controllers

covered under our standard offering. Actual AS BUILT
drawings may differ from what is shown in this package. MEMBER
2019 -2020
MEMBER
2019 -2020

November 2021
 Technical Data
GPx Series Full Service Electric Fire Pump Controller

Select starting method

Model GPA Model GPP

Across the line Partwinding
1M 1M T3
3L3
3L3 T3

*
3L2 T2

M
3L2 T2
*
3L1 T1

3L1 T1 CR4
1M 2M T9
M
CR4 CR5 T8
2M
1M T7
3L1

3L1 3L2 3L2

Model GPS Model GPR

Soft Start Soft Stop Autotransformer
1M 1M
3L3 3L3 T3
T3

* M
3L2 T2
3L2

* 3L1
T2

T1
M CR4 CR5 2S
3L1 T1

1S 100%
1M
0% ATR
CR5 1M CR5
1M 2S

3L1 65%
1S
2S
3L1

3L2 Soft Starter 3L2

Model GPY Model GPW

Wye-Delta Open Wye-Delta Closed
1M 3L3
1M
3L3 T3 T3

* *
3L2 T2 3L2 T2

3L1 T1
3L1 T1

M
CR4

M
CR4 1M 2M
1M 2M T5 CR5 1S
T5

T4
CR5 1S T4
2M

2M(LB) CR3A T6
2M
T6 3L1 2S
CR5 2M 2S(LB) 2M(LB) CR3A
3L1
1S
1S 1S

1S

3L2

3L2
2S
RES
RES
RES

MEMBER
2019 -2020 MEMBER
2019 -2020

*From normal incoming power through Disconnecting Means (IS/CB)

MEMBER MEMBER
2019 -2020 2019 -2020

This is a Marketing document. Please consult factory for more information.

November 2021 2
Manufacturer reserves the right to modify this information without notice
 Technical Data
GPx Series Full Service Electric Fire Pump Controller

Built to NFPA 20 (latest edition)

Underwriters Laboratory
UL218 - Fire Pump Controllers
(UL)
Standard, FM Global Class 1321/1323
Listings, New York City Accepted for use in the City of New York by the Department of Buildings
Approvals and Seismic Certification See page 7 for details
Certifications
CE Mark Various EN, IEC & CEE directives and standards
Built in Canada or U.A.E Built in Europe
CE Mark Option Supplied as Standard
Protection Rating

Built in Canada or U.A.E Built in Europe

Standard: NEMA 2 Standard: IP55

Optional

NEMA 12 NEMA 4X-304 sst painted IP54

Enclosure NEMA 3 NEMA 4X-304 sst brushed finish IP55

NEMA 3R NEMA 4X-316 sst painted IP65

NEMA 4 NEMA 4X-316 sst brushed finish IP66

Accessories Paint Specifications

• Bottom entry gland plate • Red RAL3002
• Lifting Lugs • Powder coating
• Keylock handle • Glossy textured finish

Shortcircuit 200V to 208V 220V to 240V 380V to 415V 440V to 480V 575V to 600V
Withstand 60Hz 60Hz 50 Hz / 60Hz 60Hz 60Hz
Rating
HP (kw)

Standard 100kA
5 - 150 (3.7 - 110) 5 - 200 (3.7 - 149) 5 - 300 (3.7 - 223) 5 - 400 (3.7 - 298) N/A
Optional 150kA

Standard 50kA 200 (149) 250 (186) 350 - 450 (261 - 335) 450 - 500 (335 - 373)
5 - 500 (3.7- 373)
Optional 100kA N/A N/A 350 - 500 (261 - 373) 450 - 500 (335 - 373)

Optional 200kA 5 - 150 (3.7 - 110) 5 - 200 (3.7 - 149) 5 - 300 (3.7 - 223) 5 - 400 (3.7 - 298) N/A

*Please see Disconnecting Means details on page 4

November 2021 This is a Marketing document. Please consult factory for more information.
Manufacturer reserves the right to modify this information without notice 3
 Technical Data
GPx Series Full Service Electric Fire Pump Controller

Ambient Standard: Optional:

Temperature 4°C to 40°C / 39°F to 104°F 4°C to 55°C / 39°F to 131°F
Rating
Controllers built in Dubai, UAE (Tornatech FZE) are supplied standard with 55°C rating.
Surge
Surge arrestor rated to suppress surges above line voltage
Suppression
• Isolating switch and circuit breaker assembly:
- Door interlocked in the ON position
- Isolating switch rated not less than 115% of motor full load current
Disconnecting
- Circuit breaker continuous rating not less than 115% of motor full load current
Means
- Overcurrent sensing non-thermal type, magnetic only
- Instantaneous trip setting of not more than 20 times the motor full load current
• Common flange mounted operating handle
Service Entrance
Suitable as service entrance equipment
Rating

Emergency Start • Flange mounted • Integrated limit switch

Handle • Pull and latch activation • Across the line start (direct on line)

Locked Rotor • Operate shunt trip to open circuit breaker • Trip between 8 and 20 seconds
Protector • Factory set at 600% of motor full load current

Electrical • Voltage phase to phase (normal power)

Readings • Amperage of each phase when motor is running
Pressure • Continuous system pressure display
Readings • Cut-in and Cut-out pressure settings
• Pressure readings with date stamp
• Event recording with date stamp
Pressure and
• Under regular maintained operation, events are stored in memory for the life of the controller.
Event recorder
• Data viewable on operator interface display screen
• Downloadable by USB port to external memory device
• Pressure transducer and run test solenoid valve assembly for fresh water application
• Pressure sensing line connection 1/2” Female NPT
Pressure Sensing • Drain connection 3/8”
• Rated for 0-500PSI working pressure (standard display at 0-300PSI)
• Externally mounted with protective cover

This is a Marketing document. Please consult factory for more information.

November 2021 4
Manufacturer reserves the right to modify this information without notice
 Technical Data
GPx Series Full Service Electric Fire Pump Controller

Audible Alarm 6” alarm bell - 85 dB at 10ft. (3m)

• Power available • Deluge valve start • Pump on demand/Automatic start
• Motor run • Remote automatic start • Pump room temperature (ºF or ºC)
Visual Indications
• Periodic test • Remote manual start • Lockout
• Manual start • Emergency start
Visual
• Control voltage not healthy • Overcurrent • Pump on demand
• Invalid cut-in • Overvoltage • Pump room alarm
• Lock rotor current • Phase loss L1 • Service required
• Loss of power • Phase loss L2 • Undercurrent
Visual & Audible • Phase loss L3 • Undervoltage
• Low ambient temperature
Alarms • Phase unbalanced • Check weekly test solenoid
• Low water level
• Motor trouble • Pressure transducer fault detected • Weekly test cut-in reached
• Phase reversal (normal power)
Visual and audible
• Fail to start

DPDT-8A-250V.AC
• Power available
• Phase reversal
• Motor run
• Common pump room alarm (field re-assignable)**
• Overvoltage
• Undervoltage
Remote Alarm • Phase unbalance
Contacts • Low pump room temperature
• High Pump room temperature
• Common motor trouble (field re-assignable)**
• Overcurrent
• Fail to start
• Undercurrent
• Ground fault
• Free (field programmable)**

**Tornatech reserves the right to use any of these three alarm points for special specific application requirements.

November 2021 This is a Marketing document. Please consult factory for more information.
Manufacturer reserves the right to modify this information without notice 5
 Technical Data
GPx Series Full Service Electric Fire Pump Controller

• Embedded microcomputer with software PLC logic

ViZiTouch V2 • 7.0” color touch screen (HMI technology)
Operator Interface • Upgradable software
• Multi-language
• Protocol: Modbus
Communication
• Connection type: Shielded female connector RJ45
Protocol
• Frame Format: TCP/IP
Capability
• Addresses: See bulletin MOD-GPx
• Start on pressure drop
Automatic Start • Remote start signal from automatic device
• Deluge valve start
• Start pushbutton
Manual Start • Run test pushbutton
• Remote start from manual device
• Manual with Stop pushbutton
Stopping
Operation • Automatic after expiration of minimum run timer ***
• Minimum run timer ***(off delay)
Field Adjustable &
Timers • Sequential start timer (on delay)
Visual Countdown
• Periodic test timer
• Pressure
Actuation
• Non-pressure
Visual Indication
• Automatic
Mode
• Non-automatic

***Can only be used if approved by the AHJ

This is a Marketing document. Please consult factory for more information.

November 2021 6
Manufacturer reserves the right to modify this information without notice
 Technical Data
GPx Series Full Service Electric Fire Pump Controller

Seismic
TRU Compliance, LLC
Certification TWEI Project No.: 2100139 - CR - 001
A Tobalski Watkins Affiliate
Company
Mounting
Rigid base and wall mounting
details
Seismic
Building Test Seismic AFLX-H ARIG-H AFLX-V ARIG-V
Certification
Code Criteria Parameters
SDS z/h IP
Seismic IBC ASCE 2.0 1.0 1.5
Information ICC-
2018, Standard
ES 3.20 2.40 2.13 0.85
CBC 7 - Section
AC156 13.2 3.2 0.0 1.5
2019

Notes:
• Components are tested in accordance with ICC-ES AC156, IBC 2018 & CBC 2019.
• OSHPD (OSP) Seismic Certification Preapproval.

November 2021 This is a Marketing document. Please consult factory for more information.
Manufacturer reserves the right to modify this information without notice 7
 Technical Data
GPx Series Full Service Electric Fire Pump Controller

A4 Flow switch provision C19 Emergency start alarm contact (DPDT)

Foam pump application w/o pressure C20 Manual start alarm contact (DPDT)
A8
transducer and run test solenoid valve.
C21 Deluge valve start alarm contact (DPDT)
A9 Low zone pump control function
C22 Remote automatic start alarm contact (DPDT)
A10 Middle zone pump control function
C23 Remote manual start alarm contact (DPDT)
A11 High zone pump control function
High pump room temperature alarm contact
Non-pressure actuated controller w/o pressure C24
A13 (DPDT)
transducer and run test solenoid valve
Second set of standard alarm contacts (DPDT)
Lockout/interlock circuit from equipment C25
A16 (Typical for city of Los Angeles and Denver)
installed inside the pump room
Additional visual and alarm contact (Specify
Built in alarm panel (120V.AC supervisory Cx
function) (DPDT)
power) providing indication for:
• Audible alarm & silence pushbutton for motor Low suction pressure transducer for fresh
B11 D1 water rated at 0-300PSI with visual indication
run, phase reversal, loss of phase.
• Pilot lights for loss of phase & supervisory and alarm contact
power available Low suction pressure transducer for sea water
Built in alarm panel same as B11 but 220- D1A rated at 0-300PSI with visual indication and
B11B alarm contact
240VAC supervisory power
High motor temperature c/w thermoster relay Pressure transducer and run test solenoid
B19A D5 valve for fresh water rated for 0-500PSI (for
and alarm contacts (DPDT)
factory calibration purposes only)
High motor temperature c/w PT100 relay and
B19B Pressure transducer and run test solenoid
alarm contacts (DPDT) D5D
valve for sea water rated for 0-500PSI
Ground fault alarm detection c/w visual
B21 D10 Omit mounting feet (when applicable)
indication and alarm contact (DPDT)
C1 Extra motor run alarm contact (DPDT) High withstand rating for:
• 200V to 208V @ 150HP max. = 150kA*
C4 Periodic test alarm contact (DPDT) • 200V to 208V @ 200HP = 100kA*
C6 Low discharge pressure alarm contact (DPDT) • 220V to 240V @ 200HP max. = 150kA*
• 220V to 240V @ 250HP = 100kA*
Low pump room temperature alarm contact D13
C7 • 380V to 415V @ 300HP max. = 150kA*
(DPDT) • 380V to 415V @ 350HP to 450HP = 100kA*
Low water reservoir level alarm contact • 440V to 480V @ 400HP max. = 150kA*
C10 • 440V to 480V @ 450HP to 500HP = 100kA*
(DPDT)
• 600V @ 500HP max. = 100kA*
High electric motor temperature alarm contact
C11 High withstand rating for:
(DPDT)
D13A • 380V to 480V = 65kA*
High electric motor vibration c/w visual
C12 • 600V = 25kA*
indication and alarm contact (DPDT)
High withstand rating for:
Pump on demand / automatic start alarm
C14 • 200V to 208V @ 150HP max. = 200kA*
contact (DPDT)
D13B • 220V to 240V @ 200HP max. = 200kA*
C15 Pump fail to start alarm contact (DPDT) • 380V to 415V @ 300HP max. = 200kA*
• 440V to 480V @ 400HP max. = 200kA*
C16 Control voltage healthy alarm contact (DPDT)
D14 Anti-condensation heater & thermostat
Flow meter valve loop open c/w visual
C17 D14A Anti-condensation heater & humidistat
indication and alarm contact (DPDT)
High water reservoir level c/w visual indication Anti-condensation heater & thermostat &
C18 D14B
and alarm contact (DPDT) humidistat

*For fire pump controller section only.

Note: Options chosen from this page are not electrically represented on the wiring schematics in this submittal package.
This is a Marketing document. Please consult factory for more information.
November 2021 8
Manufacturer reserves the right to modify this information without notice
 Technical Data
GPx Series Full Service Electric Fire Pump Controller

D15 Tropicalization L01 Other language and English (bilingual)

D18 CE Mark with factory certificate L02 French
Modbus with RTU frame format and RS485 L03 Spanish
D26
connection
L04 German
Motor heater connection (external single
D27 phase power source and heater on/off L05 Italian
contact)
L06 Polish
Motor heater connection (internal single
D27A phase power source and heater on/off L07 Romanian
contact)
L08 Hungarian
D28 Customized drawing set
L09 Slovak
Field programmable I/O board -
D34A L10 Croatian
5 Input / 5 output
L11 Czech
L12 Portuguese
L13 Dutch
L14 Russian
L15 Turkish
L16 Swedish
L17 Bulgarian
L18 Thai
L19 Indonesian
L20 Slovenian
L21 Danish
L22 Greek
L23 Arabic
L24 Hebrew
L25 Chinese

Additional Options:

Note: Options chosen from this page are not electrically represented on the wiring schematics in this submittal package.

November 2021 This is a Marketing document. Please consult factory for more information.
Manufacturer reserves the right to modify this information without notice 9
 Technical Data
GPx Series Full Service Electric Fire Pump Controller

ViZiTouch V2 Operator Interface

Home

2 3

8
5 6 7

1 - Color touch screen 3 - Screen protector

2 - Onscreen menu 4 - Power LED (3 colors)
• HOME page 5 - START button
• ALARM page 6 - STOP button
• CONFIGURATION page 7 - RUN TEST button
• HISTORY page 8 - USB port
• SERVICE page
• MANUAL page
• LANGUAGES page

This is a Marketing document. Please consult factory for more information.

November 2021 10
Manufacturer reserves the right to modify this information without notice
 Electric Fire Pump Controller Model:GPA/GPP/GPY
Dimensions Built to the latest edition of the NFPA 20 standard

27 1/4" [694]
26 3/8" [671]
1/2" [12] 17 3/4" [452] 24" [610]

14" [356] 22 1/2" [572]

Ø7/8" [Ø23] X2
Ø3/8" [Ø10] X4

See Notes

48" [1220]
55 1/8" [1400]

54" [1372]
51 7/8" [1318]

27" [685]
21 1/4" [541] 21 5/8" [549]

1" [25] Adjustable Feet

Sensing Line Connection - 1/2 " F.NPT

28" [711]
26" [660]
Drain - 3/8 " M.TUBE Ø1/2" [Ø13] X4 7" [178] 1" [25]

Voltage / Power Table

9 1/8" [233] Normal
7" [178] Power and
12" [305]
Motor Leads
Voltage Min HP Max HP Entrance

208 40 60 Notes: 1 1/4" [31] 3 1/2" [89] 4" [102]

1" [25]
220 - 240 40 75
- Standard NEMA: NEMA 2
- Standard paint : textured red RAL 3002.
380 - 400 - 415 75 125 - All dimensions are in inches [millimeters].
- Center of ViZiTouch screen: 47-5/8" [1208] from Bottom.
440 - 480 75 150 - Bottom conduit entrance through removable gland plate recommended.
- Use watertight conduit and connector only.
600 100 200 - Protect equipment against drilling chips.
- Door swing equal to door width.
- Seismic mounting to be rigid wall and base only.
Drawing for information only. Projection
Manufacturer reserves the right to modify this drawing without notice.
Contact manufacturer for "As Built" drawing.

REV. DESCRIPTION DD/MM/YY Drawing number

NYC 3. HP Table Modified 22/12/20
Dpt of Building
Approved
2. New Logo 10/05/18 GPX-DI261 /E
1. Valve Change 21/11/17 CDL
Copyright © Tornatech Inc. All right reserved. This drawing and the information contained or depicted herein are the sole property of Tornatech Inc. Copies are communicated to the recipient in strict confidence and may not be retransmitted, published, reproduced, copied or used in any manner, including as the basis for the manufacture or sale of any products, without the express prior written consent of Tornatech Inc.
Electric Fire Pump Controller
Reduced Voltage / Wye-Delta (Open Transition)
Model: GPY
Wiring schematic Built to the latest edition of the NFPA 20 standard

1L3 3L3
1L2 3L2
1L1 3L1

White

White

White
Black

Black

Black
17
3L3 64 66 68
3L2 65 67 69
18 20 3L1

4 2 3L1 19 21
To J2-J3-J4 To J76

2
1
3L2
NO NO +
C J40 J14 AI4
Motor Run C
TB1
NC NC -
2
1

NO NO +
C J42 J15 AI3
Power Available C
TB2
NC NC -
2
1

NO NO +
C J37 J16 AI2
Phase Reversal C
TB3
NC NC -
2
1
Red
NO NO +
C J39 J17 AI1
White
Pump Room Alarm C
TB4 Black
NC NC -
2
1
NO
NO LS1-1
C J41 LS1
Motor Trouble C
TB5 J54 LS1-2
NC NC
2
1
NO J20 UP
NO
C J55
(Field Programmable) C
TB6
NC NC J8 DOWN

Black - +
J46 Red
AB
Remote Manual Start IN1

SV1-1 Brown
SV
Lockout IN2 J43 SV1-2 Blue

Remote Automatic Start J1* IN3

4
Deluge Valve J45
J2* IN4 ST 2
J25
Water Reservoir Low IN5
J44 24V in

IN6 24V out 3L2

X1 H2
1
IN7 J47 24VAC 3 X2 H1
3L1
IN8
NC
J36 CR4-1
C
CR4 CR4-2
NO

NC
J38 CR5-1
C
CR5 CR5-2
NO

GF

69
L3 68
J76 67
L2 66 To CT1-CT2-CT3 Legend

65 1M-2M Contactors
1S Contactor
L1 64
AB Alarm Bell
CB Circuit Breaker
CR Control Relay

J53 CT Current Transformer

EB Electric I/O Board
IS Isolating Switch
J Jumper
J4 L3 3L3 LS Limit Switch
PT Pressure Transducer
SA Surge Arrester

J3 ST Shunt Trip
L2 3L2 To 3L1-3L2-3L3
SV Solenoid Valve
VMB ViZiTouch Main Board
XTR Transformer
J2 L1 3L1

Drawing for information only.

* Remove jumper to use this feature Manufacturer reserves the right to modify this drawing without notice.
** Contact closes when emergency start is in "ON" position Contact manufacturer for "As Built" drawing.

REV. DESCRIPTION DD/MM/YY Drawing number

NYC 2 Update Logo 23/04/18
Dpt of Building
Approved
1 Removed (fail safe) text from Power Available relay 20/02/17 GPY-WS600 /E
0 First issue 10/11/16 CDL
 Electric Fire Pump Controller Model: GPX
Terminal Diagram and Sizing for Isolating Switch Built to the latest edition of the NFPA 20 standard
Power Terminals
3 Phases Notes:
Bonding Incoming Power 1 - For proper wire sizing, refer to NFPA70 and NEC (USA) or CEC (Canada) or local code.
Ground 2 - Controller suitable for service entrance in USA.
3 - For more accurate motor connections refer to motor manufacturer or motor nameplate.
4 - Controller is phase sensitive. Incoming lines must be connected in ABC sequence.
L1 L2 L3
IS1

COPPER CONDUCTORS for Isolating Switch (IS1).

Field Wiring According to Bending Space (AWG or MCM). Terminals L1 - L2 - L3
Bending
Space 5 " (127 mm) 8 " (203 mm)

HP
5 7.5 10 15 20 25 30 40 50 60
Voltage

208 1x (10 to 1/0) 1x (8 to 1/0) 1x (8 to 1/0) 1x (6 to 1/0) 1x (4 to 1/0) 1x (3 to 1/0) 1x (2 to 1/0) 1x (1/0 to 3/0) 1x (3/0 to 250) 1x (4/0 to 250)

220 to 240 1x (10 to 1/0) 1x (10 to 1/0) 1x (8 to 1/0) 1x (6 to 1/0) 1x (4 to 1/0) 1x (4 to 1/0) 1x (3 to 1/0) 1x (1 to 3/0) 1x (2/0 to 3/0) 1x (3/0 to 250)

380 to 416 1x (10 to 1/0) 1x (10 to 1/0) 1x (10 to 1/0) 1x (8 to 1/0) 1x (8 to 1/0) 1x (6 to 1/0) 1x (6 to 1/0) 1x (4 to 1/0) 1x (3 to 1/0) 1x (3 to 1/0)

440 to 480 1x (10 to 1/0) 1x (10 to 1/0) 1x (10 to 1/0) 1x (10 to 1/0) 1x (8 to 1/0) 1x (8 to 1/0) 1x (6 to 1/0) 1x (6 to 1/0) 1x (4 to 1/0) 1x (3 to 1/0)

600 1x (10 to 1/0) 1x (10 to 1/0) 1x (10 to 1/0) 1x (10 to 1/0) 1x (10 to 1/0) 1x (8 to 1/0) 1x (8 to 1/0) 1x (6 to 1/0) 1x (6 to 1/0) 1x (4 to 1/0)

Bending
Space 12 " (305 mm) 16 " (406 mm)

HP
75 100 125 150 200 250 300 350 400 450 500
Voltage

208 2x (1/0 to 500) 2x (2/0 to 500) 2x (4/0 to 500) 2x (250 to 500) 3x (4/0 to 500) -------- -------- -------- -------- -------- --------

220 to 240 1x (250) 2x (2/0 to 500) 2x (3/0 to 500) 2x (4/0 to 500) 2x (350 to 500) 3x (250 to 500) -------- -------- -------- -------- --------

380 to 416 1x (1/0 to 3/0) 1x (3/0 to 250) 1x (250) 2x (1/0 to 500) 2x (3/0 to 500) 2x (4/0 to 500) 2x (300 to 500) 2x (400 to 500) 3x (250 to 500) 3x (300 to 500) --------

440 to 480 1x (1 to 3/0) 1x (2/0 to 3/0) 1x (3/0 to 250) 1x (4/0 to 250) 2x (1/0 to 500) 2x (3/0 to 500) 2x (4/0 to 500) 2x (300 to 500) 2x (350 to 500) 2x (400 to 500) 3x (250 to 500)

600 1x (3 to 1/0) 1x (1 to 3/0) 1x (2/0 to 3/0) 1x (3/0 to 250) 1x (250) 2x (2/0 to 500) 2x (3/0 to 500) 2x (4/0 to 500) 2x (250 to 500) 2x (300 to 500) 2x (350 to 500)

Bending
Space 5 " (127 mm) 8 " (203 mm) 12 " (305 mm)

ALUMINUM CONDUCTORS for Isolating Switch (IS1).

Field Wiring According to Bending Space (AWG or MCM). Terminals L1 - L2 - L3
Bending
Space 5 " (127 mm) 8 " (203 mm) 10 " (254 mm)

HP
5 7.5 10 15 20 25 30 40 50 60
Voltage
1x (300) ** or
208 1x (10 to 1/0) 1x (6 to 1/0) 1x (6 to 1/0) 1x (4 to 1/0) 1x (3 to 1/0) 1x (1 to 1/0) 1x (1/0) 1x (3/0) 1x (4/0 to 250)
1x (250) 90°C *
220 to 240 1x (10 to 1/0) 1x (8 to 1/0) 1x (6 to 1/0) 1x (4 to 1/0) 1x (3 to 1/0) 1x (2 to 1/0) 1x (1 to 1/0) 1x (2/0 to 3/0) 1x (3/0) 90°C * 1x (250)

380 to 416 1x (10 to 1/0) 1x (10 to 1/0) 1x (10 to 1/0) 1x (6 to 1/0) 1x (6 to 1/0) 1x (4 to 1/0) 1x (4 to 1/0) 1x (2 to 1/0) 1x (1 to 1/0) 1x (1/0)

440 to 480 1x (10 to 1/0) 1x (10 to 1/0) 1x (10 to 1/0) 1x (8 to 1/0) 1x (6 to 1/0) 1x (6 to 1/0) 1x (6 to 1/0) 1x (4 to 1/0) 1x (2 to 1/0) 1x (1 to 1/0)

600 1x (10 to 1/0) 1x (10 to 1/0) 1x (10 to 1/0) 1x (10 to 1/0) 1x (8 to 1/0) 1x (6 to 1/0) 1x (6 to 1/0) 1x (4 to 1/0) 1x (4 to 1/0) 1x (2 to 1/0)

Bending
12 " (305 mm) 16 " (406 mm)
Space

HP
75 100 125 150 200 250 300 350 400 450 500
Voltage

208 2x (2/0 to 500) 2x (4/0 to 500) 2x (300 to 500) 2x (350 to 500) 3x (300 to 500) -------- -------- -------- -------- -------- --------
1x (350) **
220 to 240 2x (3/0 to 500) 2x (250 to 500) 2x (300 to 500) 2x (500) 3x (400 to 500) -------- -------- -------- -------- --------
N/A
1x (350) ** 3x (300 to 500)**
380 to 416 1x (3/0) 1x (250 to 350) 2x (3/0 to 500) 2x (4/0 to 500) 2x (300 to 500) 2x (500) 3x (350 to 500) 3x (400 to 500) --------
N/A 2x (500) 90°C *
1x (300 to 350)**
440 to 480 1x (1/0 to 3/0) 1x (3/0) 1x (250) 2x (3/0 to 500) 2x (250 to 500) 2x (300 to 500) 2x (400 to 500) 2x (500) 2x (500) 90°C * 3x (350 to 500)
1x (250) 90°C *
600 1x (1 to 1/0) 1x (2/0 to 3/0) 1x (3/0) 90°C * 1x (4/0 to 250) 1x (350 to 500) 2x (3/0 to 500) 2x (4/0 to 250) 2x (300 to 500) 2x (350 to 500) 2x (400 to 500) 2x (500)

Bending
Space 5 " (127 mm) 8 " (203 mm) 12 " (305 mm)

* For standard enclosure, use 90°C aluminium wire. Consult Factory for Use of Conductors Rated Lower than 90°C. Drawing for information only.
Manufacturer reserves the right to modify this drawing without notice.
** Consult Factory Contact manufacturer for "As Built" drawing.

REV. DESCRIPTION DD/MM/YY Drawing number

N C
Dpt of Building
Approved
GPX-TD612 1/2 /E
0 First issue 22/12/20 CDL
Copyright © 2021 Tornatech Inc. All right reserved. This drawing and the information contained or depicted herein are the sole property of Tornatech Inc. Copies are communicated to the recipient in strict confidence and may not be retransmitted, published, reproduced, copied or used in any manner, including as the basis for the manufacture or sale of any products, without the express prior written consent of Tornatech Inc.
 Electric Fire Pump Controller Model: GPX
Terminal Diagram and Sizing For GPP,GPY & GPW Built to the latest edition of the NFPA 20 standard

Notes:
Motor Terminals 1 - For proper wire sizing, refer to NFPA70 and NEC (USA) or CEC (Canada) or local code.
2 - Controller suitable for service entrance in USA.
3 - For more accurate motor connections refer to motor manufacturer or motor nameplate.
2M 1M 2M 1M 4 - Controller is phase sensitive. Incoming lines must be connected in ABC sequence.
T7 T8 T9 T1 T2 T3 T6 T4 T5 T1 T2 T3

M M
Model : GPP Models : GPW & GPY

COPPER CONDUCTORS for Motor Connection (1M-2M).

Field Wiring According to Bending Space (AWG or MCM). Terminals T1-T2-T3-T4-T5-T6-T7-T8-T9
HP
5 7.5 10 15 20 25 30 40 50 60
Voltage

208 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (8 to 4) 1x (8 to 4) 1x (6 to 4) 1x (6 to 4) 1x (4 to 2/0) 1x (2 to 2/0) 1x (1 to 2/0)

220 to 240 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (8 to 4) 1x (8 to 4) 1x (6 to 4) 1x (6 to 4) 1x (4) 1x (3 to 2/0) 1x (2 to 2/0)

380 to 416 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (8 to 4) 1x (8 to 4) 1x (6 to 4) 1x (4)

440 to 480 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (8 to 4) 1x (8 to 4) 1x (6 to 4)

600 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (10 to 4) 1x (8 to 4) 1x (8 to 4)

HP
75 100 125 150 200 250 300 350 400 450 500
Voltage

208 1x (2/0 to 3/0) 1x (3/0 to 300) 1x (250 to 300) 2x (1/0 to 300) 2x (3/0 to 350) -------- -------- -------- -------- -------- --------

220 to 240 1x (1/0 to 2/0) 1x (3/0) 1x (4/0 to 300) 1x (300) 2x (2/0 to 300) 2x (4/0 to 350) -------- -------- -------- -------- --------

380 to 416 1x (4 to 2/0) 1x (2 to 2/0) 1x (1/0 to 2/0) 1x (2/0 to 3/0) 1x (4/0 to 300) 1x (300) 2x (2/0 to 300) 2x (3/0 to 300) 2x (4/0 to 350) 2x (4/0 to 350) --------

440 to 480 1x (4 to 2/0) 1x (3 to 2/0) 1x (2 to 2/0) 1x (1/0 to 3/0) 1x (2/0 to 3/0) 1x (4/0 to 300) 1x (300) 2x (1/0 to 300) 2x (2/0 to 300) 2x (3/0 to 350) 2x (4/0 to 350)

600 1x (6 to 4) 1x (4) 1x (3 to 2/0) 1x (2 to 2/0) 1x (1/0 to 3/0) 1x (2/0 to 3/0) 1x (4/0 to 300) 1x (250 to 300) 1x (300) 2x (1/0 to 300) 2x (2/0 to 300)

ALUMINUM CONDUCTORS for Contactor (1M-2M).

Field Wiring According to Bending Space (AWG or MCM). Terminals T1-T2-T3-T4-T5-T6-T7-T8-T9
HP
5 7.5 10 15 20 25 30 40 50 60
Voltage

208 1x (12 to 2/0) ** 1x (10 to 2/0) ** 1x (10 to 2/0) ** 1x (8 to 2/0) ** 1x (6 to 2/0) ** 1x (4 to 2/0) ** 1x (4 to 2/0) ** 1x (2 to 2/0) 1x (1/0 to 2/0) 1x (2/0)

220 to 240 1x (12 to 2/0) ** 1x (10 to 2/0) ** 1x (10 to 2/0) ** 1x (8 to 2/0) ** 1x (8 to 2/0) ** 1x (6 to 2/0) ** 1x (4 to 2/0) ** 1x (2 to 2/0) ** 1x (1 to 2/0) 1x (1/0 to 2/0)

380 to 416 1x (12 to 2/0) ** 1x (12 to 2/0) ** 1x (12 to 2/0) ** 1x (10 to 2/0) ** 1x (10 to 2/0) ** 1x (8 to 2/0) ** 1x (8 to 2/0) ** 1x (6 to 2/0) ** 1x (4 to 2/0) ** 1x (3 to 2/0) **

440 to 480 1x (12 to 2/0) ** 1x (12 to 2/0) ** 1x (12 to 2/0) ** 1x (12 to 2/0) ** 1x (10 to 2/0) ** 1x (10 to 2/0) ** 1x (8 to 2/0) ** 1x (8 to 2/0) ** 1x (6 to 2/0) ** 1x (4 to 2/0) **

600 1x (12 to 2/0) ** 1x (12 to 2/0) ** 1x (12 to 2/0) ** 1x (12 to 2/0) ** 1x (10 to 2/0) ** 1x (10 to 2/0) ** 1x (10 to 2/0) ** 1x (8 to 2/0) ** 1x (8 to 2/0) ** 1x (6 to 2/0) **

HP
75 100 125 150 200 250 300 350 400 450 500
Voltage

208 1x (3/0) Consult Factory 1x (300) 90°C * 2x (3/0 to 300) 2x (250 to 350) -------- -------- -------- -------- -------- --------

220 to 240 1x (2/0) 90°C * Consult Factory 1x (300) 1x (300) 90°C * 2x (4/0 to 300) 2x (300 to 350) -------- -------- -------- -------- --------

380 to 416 1x (2 to 2/0) 1x (1/0 to 2/0) 1x (1/0 to 2/0) 1x (3/0) 90°C * 1x (300) 1x (300) 90°C * 2x (4/0 to 300) 2x (250 to 300) 2x (300 to 350) 2x (300 to 350) --------

440 to 480 1x (3 to 2/0) ** 1x (2 to 2/0) 1x (2/0) 90°C * 1x (2/0 to 3/0) 1x (3/0) 90°C * 1x (300) 1x (300) 90°C * 2x (3/0 to 300) 2x (4/0 to 300) 2x (250 to 350) 2x (300 to 350)

600 1x (4 to 2/0) ** 1x (3 to 2/0) ** 1x (2 to 2/0) 1x (1/0 to 3/0) 1x (3/0) 1x (3/0) 90°C * 1x (300) 1x (300) 90°C * Consult Factory 2x (3/0 to 300) 2x (4/0 to 300)

* For standard enclosure, use 90°C aluminium wire. Consult Factory for Use of Conductors Rated Lower than 90°C.
** Option V659 required. Drawing for information only.
Manufacturer reserves the right to modify this drawing without notice.
Contact manufacturer for "As Built" drawing.

REV. DESCRIPTION DD/MM/YY Drawing number

NYC
Dpt of Building
Approved
GPX-TD612 2/2 /E
0 First issue 22/12/20 CDL
Copyright © 2021 Tornatech Inc. All right reserved. This drawing and the information contained or depicted herein are the sole property of Tornatech Inc. Copies are communicated to the recipient in strict confidence and may not be retransmitted, published, reproduced, copied or used in any manner, including as the basis for the manufacture or sale of any products, without the express prior written consent of Tornatech Inc.
Electric Fire Pump Controller Model: GPX
Terminal Diagram and Sizing Built to the latest edition of the NFPA 20 standard

Control Terminals (EB1) Remote Alarm Terminals (EB1)

Terminals Wire Size: Terminals Wire Size:
24 - 12 AWG 24 - 12 AWG
0.5 Nm 0.5 Nm

Normally open
2

NO
Normally closed Closes to alarm C
Opens to alarm NC
Remote Manual Start Close to start pump IN1 J25 Motor Run J40
Normally open
1
TB1
NO
Normally closed Closes to alarm
C
Opens to alarm NC

Normally open
2

NO
Normally closed Closes to alarm C
Opens to alarm NC
Lockout Close to block start IN2 J25 Power Available J42
Normally open
1
TB2
NO
Normally closed Closes to alarm C
Opens to alarm NC

Normally open
2

NO
Normally closed Closes to alarm
C
Opens to alarm NC
Remote Automatic Start Open to start pump J1* IN3 J25 J37
Phase Reversal Normally open
1
TB3
NO
Normally closed Closes to alarm C
Opens to alarm NC

Normally open
2

NO
Normally closed Closes to alarm C
Opens to alarm NC
Deluge Valve Open to start pump J2* IN4 J25 Pump Room Alarm ** J39
Normally open
1
TB4
NO
Normally closed Closes to alarm C
Opens to alarm NC

Normally open
2

NO
Normally closed Closes to alarm C

Alarm Inputs (EB1) Motor Trouble **

Opens to alarm NC
J41
Normally open
1
TB5
Terminals Wire Size: NO
24 - 12 AWG Normally closed Closes to alarm
C
0.5 Nm Opens to alarm NC

Normally open
2

NO
Normally closed Closes to alarm C
Opens to alarm NC
Water Reservoir Low Close to signal alarm IN5 J25 (Field Programmable ***) J55
Normally open
1
TB6
NO
Normally closed Closes to alarm C
Opens to alarm NC

Network Connection (VMB1)

Shielded Female Connector RJ45

Modbus TCP/IP

* Remove jumper to use this feature Drawing for information only.

** Re-assignable Manufacturer reserves the right to modify this drawing without notice.
*** Not available on GPS models Contact manufacturer for "As Built" drawing.

REV. DESCRIPTION DD/MM/YY Drawing number

NYC
Dpt of Building
2 Revised logo 18/06/18
Approved
1 General Revision (added AL coverage) 10/07/17 GPX-TD603 /E
0 First issue 16/03/17 CDL