0% found this document useful (0 votes)
45 views19 pages3rd Sem Papers
qp
Uploaded by
anchalgaokaramayCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
0% found this document useful (0 votes)
45 views19 pages3rd Sem Papers
qp
Uploaded by
anchalgaokaramayCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
/ 19
Government College of Engineering, Aurangabad
(An Autonomous Institute of Government of Maharashtra}
SY, B.Tech, Mech Engineering Examination (CBCS)
Class Test 1, 27 September 2022
MEPC2004: Material Science and Metallurgy
Date of Examination: 27-9-2022
Time: One Hour Max. Marks: 15
“Verify the course code and check whether you have got the correct question pape:
©) Explain the micro structure of cast iron
jay. ‘Questions 1co Max
LNo. | 1
| Qi. | Auempt any TWO.
| a) Explain Crystal imperfections COL
| | b) Explain Surface defects or Planar Defects cor
| c) Explain Gibbs Phase rule | cor
Q2. | Attempt any TWO | 73
| 2) Draw iron carbon diagram | co2
{ ®) Explain ron carbon diagram | CO2
! | co2
C03), BTL: Blooms Taxonomy:
‘Scanned with CamScanner ¥
pee ‘
i Government College of Engincering, Aurangabad
+ (An Autonomous Institute of Government of Maharashtra)
~~ B.Tech. S.Y.Civil/Mech (CBCS)Class Test-1, September 2022
2a _MABS 2001: Engineering Mathematics
. Time: One Hour Date of Examination: 28-Sep-2022 Max. Marks: IS.
“Verify the course code and check whether you have got the carrect question paper”
NB 1. Use ofnon programmable caleulaior is allowed
2. Attempt all questions in sequence os
x * Questions
CO [BFE [Marks
Define the n™ order Linear Differential Equation with constant coefficients cor {Ki {i
cos |K2 [8
@. | Attempt any two 2 ©
a) Using Taylors series method, solve the’ dilferentt equation i
z= = x2y — 1, given that y(0) = 1; tea ‘y(0.1),9(0.2)
8b) ‘Solve the equation 22 = x? + y, given‘that y(O) = 4, find y(0.1), using
0.05 7
Euler's modified method taking
a
©) Use Fourth order Runge-Kutta method, solve the equation = x? + y?,
1.5 to find y(1.1), by taking h = 0.1
given that x9 = 1,94
‘Scanned with CamScanner F oy dy =a _ 4]
Bie o
Baus
CF atqgeade® a
3 | Attempt any ewo cos |K2 |6
a) Solve (D? — 1)y = x3
_| 8) Solve (D? — 6D.+ 13)y = 8e%* sin 4x
©) Solve by using method of Variation of parameters
(D? — 2D + 2)y = e* tanx
HEEL feeee “=
‘Scanned with CamScanner Government College of Engineering, Aurangabad
(An autonomous Institute of Goverment of Maharashtra)
SY Mechanical Engineering (III Sem.) Examination
Class Test- I (September 2022)
INMC2010: ENVIRONMENTAL STUDIES
Max. Marks:
Time: I Hour
NB.
1-All questions carry equal marks
2. Figures tothe right indicate full marks
5. Assume Suitable data tables, diagrams if necessary and state it clearly
QI. Define Engineering. Explain in detail Factors affecting occurrence and availability of Natural Resourees. 5
(COLBT?
5
(cor: BY 2)
5
Q.2. What is Natural resource? Elaborate how water may act as resource.
Q 3. Discuss in detail comprehensive nature of Env. Studies with reference to scope and need.
(COR BLy
Scanned with CamScanner ~
Not
Government College of Engineering, Aurangabad
“(An Autonomous Institute of Government of Maharashtra)
'S. E. Mechanical CBCS-New (Full Time)
CLASS TES
‘MEPC2001: ENGINEERING
I
THERMODYNAMICS
Time: One Hour 10.00 10 11.00.am__ 26/09/2022 Max. Marks: 15
fe: 1. Assume suitable data if necessary.
2. Use of non-programmable caleulator is permitted.
(J Question
Marks | CO | BT |
Solve any One
Ti) A gas turbine developing 14.7 MW receives 20 kg/s of hot gases
from the combustion chamber with enthalpy 1150 kiskg and the |
Velocity 60 mvs. The gases leave the turbine with the enthalpy of 335
ivkg and the velocity of 150 mvs. Calculate the rate at which heat is
transfered to the surroundings Ifthe combustion gases at inlet 0 | gy
turbine have specific volume 0.5 m*/ks. Caleulate the inlet pipe eross
| sectional area.
Q
2
&
|B) Tn a Seady Tow apparatus, 135 KI of work is done by each kg oF T i
| fluid. The specific volume of the fluid, pressure, and velocity at the
| inlet are 0.37 m'rkg, 600 kPa, and 16 m/sec. The inlet is 32 m above
| the floor, and the discharge pipe is at floor level. The discharge
conditions are 0.62 m'/kg, 100 kPa, and 270 msec. The total heat |
|
| “oss between the inlet and discharge i
| through this apparatus, does the specific internal energy increase or |
decrease, and by how much?
Solve any Two
9 ki/kg of fluid. In flowing | |
]1. Show that “efficiency of all reversible heat engines operating
between the same temp. levels is the same”,
|
L
| 2. Establish the equivalence of Kelvin-Planks and Cla
tatements. | 5 co2 | KI
3. A domestic food freezer maintains a temperature of -15 °C.
ambient air temperature is 30°C. If the heat leaks into the freezer at
the continuous rate of 1.75 ki/s, What
pump this heat out continuously?
he
s C02 | K3
the least power necessary to
14.7 x1lOS 1-4
1.
vl
Scanned with CamScanner Government College of Engine:
| Cla
i Time: 1 Hour
Tnstructions to Candidates:
i, Attempt all the questi
2. Figures to right indicate full marks.
Assume suitable data wherever necessary and state the assumptions made,
(An Autonomous Insttite of Government of Matterehta)
Department of Mechanical Engineering
Class:Second Year Mechanical (Third Semester)
Test No, !Date 26-09-2022 ‘Time 1.45 to2.45pm
MEPC2002: Manufacturing Processes
Max. Marks:-15
r 1 Marks |CO_ | BT
Q.1 | Attempt any one question, 3
| a) | Describe necessity of shrinkage and draft allowance provided to Ol | BTi,
| pattern with the help of figures. | BT2
b) | Describe Sweep pattern with the help of figure. State its col | BTL,
applications. | Br2
Z 10 | |
Q2 | Attempt any two questions.
rite i properties of a moulding sand
Five imp
) | State any three advantages, any three disadvantages and any two
applications of CO» mouldis —
©), Describe Shell moulding process with the help of figure. State its
| applications.
Course Outcome
I T CourseOuteomes
(cor Interpret foundry practices like pattern making and core making,
[Geox Interpret foundry practices like moulding.
| Cos Classify different plastic molding processes, fabricating methods of plastie,
Lamination and joining of plastic,
1s metal forming processes such as Hot and Cold wor
| C04
| | Rolling, Forging, Extrusion and Drawing Processes.
[cos | Identify appropriate Joining Processes to join workpiece.
Bloom's Taxonomy
BTI- Remember, BT2- Understand, BT3- Apply, BT4- Analyze, BTS- Evaluate, BT6- Create
‘Scanned with CamScanner Government College of Engineering, Aurangabad
a tes (An Autonomous Institute of Government of Maharashtra)
f } Department of Mechanical Engineering
*e Class: SE Mechanical Semester: II]__AcademicYear: 2022-23
“semawoees Class Test Date: 27-09-2022,
‘MEPC2003: Mechanisms of Machine
Note: {attempt al questions
it Assume suitable data ifnecessory
FE Ue ofnon programmable ealuator is permitted,
iu This paper contains —1__pages. ‘
[Qi [Attempt any THREE questions Marks [CO [BT
‘a)___] What is machine? Giving example, differentiate between a machine 3 ‘cor [BIT
and structure.
})_| Explain Grashof's Law fora four bar chain? 3 cor_| BTi2
©) | State and prove the ‘Aronhold Kennedy’ theorem of three 3 co2_| BTI2
instantaneous centres.
@_| Sketch and explain any three inversions of a Single slider crank chain | 3 cor (gr. =
2 | Attempt any ONE questions. |
2) | Explain different kinds of kinematic pairs giving example for each of | 6 cor_|BT2
‘them?
1b) | Locate all instantaneous centres of the slider crank mechanism as | 6 coz [BTS
shown in figure. The length of crank OB and connecting rod AB are
100 mm and 400 mm respectively. Ifthe crank rotates clockwise with
an angular velocity of 10 rad/s
find: 1. Velocity of slider A
2. Angular velocity of the connecting rod AB.
course Outcome
‘COI: Explain the basic concept of kinem:
‘CO2:- Apply the knowledge of velocity of linked mechanisms to formulate,
and solve practical problem,
is links and applications
mute, understand motion to analyze
‘leom's Taxonomy BT: Remember, T2- Understand, BTS App, BT Analae, T5- Evaluate, OTE Create >
Scanned with CamScanner ment College of Engineering, Aurangabad
(An Autonomous Institute of Government of Maharashtra)
S.¥. B. Tech, (Civil and Mechanical ) (New CBCS)
ISE - Il, November 2022
MARS 2001: Engineering Mathematies-I11
Time: One How __Date: 03/11/2022 Ma. Marks.
“Verifs the course code and check whether you have got the corre
xa
1. Assume stele dota if necessary and sti cleany
{se nmprogronmabiecolerlorar i alowed
“tenga questions nsequence
xy Quest
Qi. [Attempt any one
|
Gov
Time 01.45 10 02:45pm
8 Define. the Homogeneous Linear Paial Differential Equation with constant] CO1 | KI | 2
coefficients and Simple Harmonic motion.
[eo- Tar |
J» Secret i |
i
@ | ‘Attempt any two
a) Solve p?+q?=x? +y? cos/K2] 8 |
|») Solve (D3 — 2D2D')z = 2e* + 3x2y |
|) Solve (D? - DD' + D'—1)z = sin(x + zy) | |
@ [Attempt any two TI i
| A long column ofiength sfc one end andis completely fee athe other tf} || |
the load p is axilly applied to > see end, so the defection eurve is
| y=afs—cos{( 2) 2] i: he eat
deflection of the beam is given by £12 = p(a y) and origin is taken at the
: @ a
cement of the free end, The
fixed end. The leat value ofthe critical load p = cos |K3| 5
b. A body weighting 20kg is hung from a spring. A pull of 40kg weight will stretch
the spring o 10cm. The body is pulled down to 20cm below the static equilibrium
Position and then released, Find the displacement of the body from its equilibrium
Position at time ¢ seconds, the maximum velocity and the period of oscillation,
© Determine the transient and steady stute solutions of mechanical system with
Weight 6 1b, stiffness Gonstant 12 lb/ft, damping force 1 Stimes instantaneous
"elocity, extemal foree 24 cos dean initial contions x = £ fe Bs0
‘Scanned with CamScanner Government College of Engineering, Aurangabad
(An autonomous Institute of Government of Maharashtra)
SY Electrical, Civil & Mechanical Engineering (11 Sem.) Examination
Class Test- II (November 2022)
INMC2010: ENVIRONMENTAL STUDIES
Time: 1 Hour Max. Marks: 15
NB.
1. Attempt any three questions
2.Allquestions carry equal marks
3. Figures to the right indicate full marks
4. Assume Suitable data, tables, diagrams if necessary and state it clearly
Q. 1. Explain Interception, transpiration and evapo-transpiration processes as a crucial part of
(CO2; BT2)
hydrological cycle. (5 Marks)
Q. 2. Describe types and forms of water. Enlist and elaborate causes and effects associated
(5 Marks) (CO1; BT1)
with use and over utilization of water.
Q.3. Explain in detail physical and chemical characteristics of water with reference to potable
water. (SMarks) (C02; BT 2)
Q. 4. Define forest cover and tree cover. Explain in detail forest resource with its national and
international status. (SMarks) (C02; BT 1)
Scanned with CamScanner GovernmentCollegeofEnginecring,Aurangabad —
DepartmentofMechanicalEngineering |
fechanical Semester: 1 Academie Year: 2022-23 |
ClassTest it Date: 02-13-2022
MEPC2003: Mechanisms of Machine |
—Time:OneHour—___ ———Max.Marksi1s— |
Note: LAtenptatquesions
itAssume state date necssan
8 4s fn prograsp
in "Ths paper conta pages,
or Adempt any Two following questions a Marks [CO__|BT_
Define rubbing velocity ata pin join What will Be the ribbing} 5 | COS] BITS |
locity at pin joint when the two links move in the same and |
opposite directions?
What are the different types of motion with which @ follower ean
move?
) | The rank oF a slider crank mechanism rotates clockwise ata constant | 5 | CO2 | BTS
speed of 300 r-p.m. The erank is 150 mm and the connecting rod is
600 mm long. Determine : 1. Linear velocity and acceleration of the |
‘midpoint of the connecting rod, and 2. angular velocity and angular
acceleration of the connecting rod, at a crank angle of 45° from inner |
dead centre position. H
©) | Define the following terms as applied to cam with a neat sketch = 3 [cos |Br24
© Base cel, (Pitch cre, (6) Pressure angle and (6) Soke of | \
L the follower. \
[2 Attempt any One folowing questions: T
| a) | PQRS is a four bar chain with fink PS fixed. The lengths of the Tinks |_5_ [CO2 | BTS
| are PQ = 62.5 mm ; QR = 175 mm ; RS = 112.5 mm ; and PS = 200 |
mm. The crank PQ rotates at 10 rad/s clockwise. Draw the velocity
and acceleration diagram when angle QPS = 60° and Q and R lie on
the same side of PS. Find the angular velocity and angular
acceleration of links QR and RS.
| A cam, with a minimum radius of 25 mm, rotating clockwise ata] 5 | CO3 | BT24
Uniform speed is to be designed to give a roller follower, at the end of | |
a valve rod, motion described below
1. To raise the valve through 50 mm during 120° rotation of the cam ;
2. To keep the valve fully raised through next 30°;
3. To lower the valve during next 60°; and
4, To keep the valve closed during rest of the revolution i.e, 150°
“The diameter of the roller is 20 mm and the diameter of the cam shaft |
i
|
|
|
|
|
|
is 25 mm. |
|
|
Draw the profile of the cam when (a) the line of stroke of the valve
rod passes through the axis of the cam shaft.
‘The displacement of the valve, while being raised and lowered, is to
take place with simple harmonic motion. Determine the maximum
acceleration of the valve rod when the cam shaft rotates at 100 rp.m._| |
CourseOutcome
{oi Understand inet, Krank ads eens
(C02. Apply the knowledge cf veloc and acceleration nays to formulate
eee the son mectanism ts motion and acleairs andthe geometry am profes fr anaiyss of egiearng
probiemsrelsteg to cm mechanism.
bloom'sTaxonomySTl Remember T2-Under
stand S12 AopyaTé Anaya sTS-LauateSTE-Croate
‘Scanned with CamScanner Jovernment C
| (An Autonomous fi
| Department of Mechanical E:
i Class: Second Year Mechanic:
Class Test No. 2Date 01-10-2022
Instructions to Candidates:
lege of Engineering, Aurangabad
stitute of Government of Maharashtra)
gineering
(Third Semester)
1.45 t02.45pm.
MEPC2002: Manufacturing Processes
Time: 1 Hour Max. Marks:-15
1. Attempt all the questions which multiple choice. Select the correct choice.
2. Each question carries one mark.
5. Figures to right indicate full marks,
4. Assume suitable data wherever necessary and state the assumption mode.
Marks |CO_| BT
15
8) | Describe any five design consideration in castings with the help of cos | BT,
I figures, BI2
| ©) | Differentiate between hot chamber die casting and cold chamber die C03 / BTI,
| casting, State any five differences. (Do not draw figures) BI2
|e) [Deseribe following casting defects in castings with the figures, C03 | BTI,
|_| sauses and remedies. i) Blow holes ii) Cold shut iti) Warpage iv) BI2
| Hot tears v) Mis run |
| 4) | State any two advantages and any two disadvantages and any two COS | BTT.
\ applications of continuous casting. it | Br2
| ¢) | Describe the process of investment casting with the help of figures. | COs | BT,
Jameel BI2
Course Outcome
= T
CourseOutcomes
[cor | Interpretfoundrypracticeslikepatternmakingand core making.
[coz | Interpret foundry practices like moulding,
[cos [ Understand different casting processes.
L
Coe Differentiate various metal forming processes such as Hot and Cold working,
|
Rolling, Forging, Extrusion and Drawing Processes.
|
[COs | IdentifyappropriateJoiningProcessestojoinworkpiece,
L 1
Bloom's Taxonomy
BT1- Remember, BT2- Understand, BT3- Apply, BT4- Analyze, BTS- Evaluate, BT6- Create
‘Scanned with CamScanner ngincering, Aurangabad
c of Government of Maharashtra)
al CBCS-New (Full T
ASS TEST-AL
RING THERMODYNAMICS,
PC2O1: ENGI
Time: One Hour
Note: 1. Assume suitable data if necessar
2. Use of non-programmable eal
[ ON]
lator and steam tables is permitted.
Max. Marks: 18
Question
Marks | CO | BT
Solve any One
€ with neat sketeh the working oF separating calorimeter for
s |coz| KI
‘measuring the dryness fraction of steam, State the limitations
2) low the analysis of exhaust and fue gas is carried out using ORSAT| S| coy] Kr
apparatus,
~ Solv =
iets 1) Show A steam at 10 MPa & 600°C is trotted io MPa, Determine
4 K3
the exit condition of steam, (Use Moller chart) Real S02
throttling calorimeter was used to determine the dryness
(eam flowing through a steam main at 900 kPa. The
Pressure and temperature after throttling were 105 kPa and 115 °C
respectively. The mass of the steam condensed after throttling was 1.8
kg & mass of water collected in the separating calorimeter was 0.16 |
kg, Determine the dryness fraction ofthe steam flowing through the
steam mi
fraction of s
5 |co2|K2
3) The ultimate analysis ofa sample of coal gave the following analysis
by wei
i, C = 65%, H = 6%, S = 1.5% and O2 = 18%, Find the HCV
& LCV of this coal using Dulong’s formula.
S| CO4} K3
‘Scanned with CamScanner crament College of Foginecring, Auraogatad
(An Autonomous Institute of Government of Maharashtra
Department of Mechanical Engineering
Class:
‘Semester Examination Jan 202
MEPE 200:
Time: Three Hours 1 1 SAN.
|: structions to Candidates:
|. Attempt all the questions
2. Figures to right indicate full marks,
3. Draw figures or diagrams wherever necessary
4
3
lanufacturing Processes
3 Max. Marks:
ible data wherever necessary and state the assumption mode.
Second Year Mechanical (Third Semester)
Assume s
171 [ Solve any two questions Maris [CO [er |
| a) | State any six ways in which a pattern differs from an actal component | COL KILK2
i.c., casting. ile
}) | Describe shrinkage allowance and machining allowance provided wo |CO1 | K1,K2
pattem with the help of figures. ie
| e)_| Describe follow board pattem with the help of figure. cor [Ki K2
[Q2 | Solve any two questions. 2x 6= 12Marks
a) | Describe the importance of ingredients like silica sand, clay and|CO2 | K1,K2
moisture of a moulding sand. Bees is
5)_| Differentiate between green sand mould and dry sand mould. Coo [Kika
02] Ki, K2,K3—
] Which type of moulding process is used for casting large bells? Why?
Describe with the help of figure.
‘Solve any two questions. 2x = Marks
While designing of casting, how rounded comer or sharp comers,
abrupt changes in sections and interior wall and sections
recommended and not recommended. Describe with the help of figures.
|b) | Why permanent mold casting is used heavily in the automotive industry | CO3__| K1, K2
to create parts like gears, castings, suspensions, fuel injection housings,
|__| and engine pistons?
| c)_| Compare investment casting with sand casting. Co3__[ KI, K2
| Q.4 | Solve any two questions. ‘2x 6= 12Marks
a) | Products such as wire spools, packaging, boitle caps, automotive parts | CO4 | KI, K2, K3
and components, toys, pocket combs, some musical instruments are to
be manufactured for producing high volumes. Select the appropriate
plastic manufacturing process. Justify your answer.
Compare plastic ‘Processes extrusion, injection moulding and blow | CO4 KI, K2,K3
moulding with cach other based on complexity of parts produced,
example of parts produced, forming action and type of mould.
Fale ree advantages and any three disadvantages of drape |CO4 | K1,K2
ing.
: 2x 6= 12Marks
ei hot rolling used to manufacture various bars with the help of | COS _ | KI,K2
Differentiate between hot
<= = a cos. KI.K2
-| Deseribe cold wire drawing process with COS__|KI,K2
1.0)
Scanned with CamScanner —— oe
Government Catlege of Engineering, Aurangabad
(An Autonunnons istic of Cometninent of Marasbera)
¥. (Mechanical, Ulectrical, Civil) Examination
1nd temester Vaamunatio Yay 2073
INMC 2011 NVIRONMENTAL STUDIES
20 Jan 0a
Time: 3 Hours = Max. Marks: 64
a Toe Cale ond cc whether yn la Wi te Corect Baton Pot
Na
1. Attempt all queutons
2 Higures ta the vt indicate fll marbs .
1 Avcunne suitable daa if wecessary and state it clearly,
4. Uaeaf Nom Programmable Calewlator and Nata Shect ts allowed,
[O1 | Atemptany TWO oo fee
A. Describe in detail remote sensing and GIS with its |COF | B11 |06
applications ee
1, Write detailed note on Climate change. re eee
C, What should be the role of an Engineer to protect and[CO2 {B.T.1 | 06
conserve ecological components.
02 | Attempt any TWO co —
A. Give comprchersive account on structural and Coz 06
functional aspects of an ecolopjcal systems. |
Describe levels of organization in the environment. | COL | BI.2 | 06
b C. Explain in detail Bioremediation and Phytoremediation | CO! | B.T.2 | 06
with itsadvantapes
03 | Ademptany TWO Coz | BT. | Marks
Level
A. Explain in detail Water resources with causes and | COT | B.T.1 | 06
fects of overutlization of water
1B. Deseribe in detail chemical composition of wood and [Cor | BT1 | 06
scientific relevance of forest in the water cycle.
C. What is RUSLE? Write a comprehensive note on land | Cos | RT2 | 06
resources with its depradation and control measures,
04 [Attempt any TWO C02 | BT. | Marks
a 7 Level
A. Explain In-situ and Fxaita conservation methods of cor |BT.2 | 06
biodiversity, nani
1. Explain why India is referred as a mega diversity cor |Er1 [06
nation with respect to Flora and Fauna
C. Write a detailed note on Liqui Coz |B? | 06
5 | Attempt any TWO — CO | RT. | Marks
Level
A. Global warming, .
Hobal warming Col |Br2 [06
1. Tioreactor- De
Wioreactor- Design and applications coz |ErT | 06
©, Water Pottutia ae
er Pollution Cor lena 106
Nate: CO: Course Oudcome,
BT. Level: Bloom's Taxono
Page 1/1
Scanned with CamScanner ‘ering, Aurangat
SVM Teen. (CHUM
MANS 2001: Engin
Some Bate uf Vsamination:
Vest the Tose ake wa ches d whe
CBCS) Exam
4
of Mahara)
1 Mathemation tH
A A tN ate ac
O he | Ovestions | 60s | rts [Maas
O18 | Attemph any ba of the follwing Le
4) Vind (04) hy using Milne's predictor-corrector method given
Wy.
oy st
1) Using fot onder Runge-kutta method, solve the equation
1 subject the conditions 0, y= 1 find co | «2 | 2
de Poe 7
110.2) taking Ob
©) Using Taylors series method, solve the differential equation
be eee aman panel ates yay ea
fee f 4 —_- t
[DFP Aatempn oy ine ofthe Tolowing
oe J anemoh iy Fi e =I
2) alvetecwunion 2 «Yad yO)~1 08nd (0A),
using modified Fulet’s method vlsen f= 0.2 co | wm | 6
[OW inlve xr 2p 4ye~x yg =2"(~y)
|W Find partial differential equation of all spheres of given
I sds Toe
o1 ‘Attempt any two of the following
| 4) Solve
(D?-Nyy- coshxcosx
| 6) Solve by using method of variation of parameters cor} 2
| 2
| DP dy (er)
|e) Siotve the equation 272" Ay sy a x?
| eee
04 | Atteot any te 6 the following
Solve (DY appr) xy ae
|) salve (osu 20" von Di) e = sine +») cof x | 2
|) tale te enti 2 pes gy ep? a |
1
‘Scanned with CamScanner | Attempt any two of the following,
ms eee
7 ame at engi ‘one end and is completely fee
pied to the free end, show
|
| | ne
| P
| | that the deflection curve is y=] 1~ £25) 1h psec
| | tateral displacement ofthe free end. The deflection ofthe beam is
| | given by ET cs ‘P(b—y)and origin is taken atthe fixed end, The
| © sep = EH
| least value of the critical load is p = =
1b) A body weighting 20kg is hung from a spring. A pull of 60kg,
‘weight will tech the spring to.20cm, The body i pled do cos | xs
30em below the static equilibrium position and then released. Find 2
ie displacement of the body from its equilibrium position at time t
seconds, the maximum velocity and the period of oscillation.
©) Solve 2 = or
| | (i) u(x.0)
(ii) w(aay
| Go) u(b)=
[O67 Aempt any one of the following
au eu
Solve Mg? 2 iy
. a a ¥
@ wOn=0
(i) un=0
3)
ity (2
(i) (2 .
() H(,0)= asi 2) Ocx
