er to pages 6 - 7.

ww.armstrongceilings.com.au

CEILING SY S T E M S
Between us, ideas become reality™

PeakForm
SUSPENSION SYSTEMS
 The PeakForm Range:
WHERE INNOVATION MEETS PERFORMANCE

PeakForm is a comprehensive range of suspended ceiling grid

solutions designed to meet most commercial design
requirements:
• General Application: Including PRELUDE XL 24mm and
SUPRAFINE XL 15mm systems.
• Designer Applications: Including the minimalist SILHOUETTE
system.
• Perimeter Trims and Accessories.
PeakForm suspension systems meet the requirements of
Australian Standard 2785-2000 “Suspended Ceilings Design and
Installation” and are designed for use with a wide variety of
Armstrong ceiling products including: mineral and soft fibre,
metal, wood and special solutions.

PeakForm Grid Profiles

PeakForm is an innovative design for Main Bars and Cross
Runner. The taller PeakForm profiles are engineered to create a
stronger, more stable suspension system making installation both
faster and easier. PeakForm Main Bars feature a firm, quick and
easy assembled Main Bar to Main Bar / bulb to-bulb connection.
The staked-on Superlock joiner clip allows for Main Bars to be
disconnected and reconnected laterally in low clearance areas or
in the middle of a room. Superlock is an industry first
staked-on clip for Main Bars which provide tighter, secure
bulb-to-bulb connections; connections are confirmed by an
audible click.

Hot Dipped Galvanized Steel: PeakForm “click” installation

Inhibits red rusting better and longer than electro galvanised or PeakForm Cross Runner in both 24mm and 15mm widths
painted systems feature an advanced stab system that locates with an audible
• Installation of grid can start before the building is enclosed. “click”, ensuring a solid installation at all times. The stab end is
• Long term system performance because entire system is precision stamped from a separate piece of high grade steel
hot dipped galvanised steel. permitting an increased accuracy and economy of production
over the more conventional integral forming of the Cross Runner
Thin gauge technology: ends. All 1200 long Cross Runner feature the PeakForm design.
The Cross Runner are inserted to the right of each other through
A lighter carton weight enables easier
the Main Bar slots and easily pushed home.
handling on site, plus the added
benefit of the PeakForm bulb allows
easy cutting of the grid.

Physical detail
All grid sections are made from double-web galvanised steel with
a surface finish of baked polyester paint.

Rotary Stitched for strength

All PeakForm components feature a unique “rotary stitched”
construction. The two metal layers of
the vertical web are mechanically
locked together in a sophisticated Sustainability
in-line process. Stitching enhances
Armstrong PeakForm suspension systems contain 25%
the torsional resistance and general
recycled content and can be fully recycled at the end of life.
“feel” of the PeakForm components.
PeakForm grid systems are modular and can be disassembled
and reused.

2 For additional information and drawings, please refer to www.armstrongceilings.com.au

19 CARRINGTON STREET (CNR HINCKSMAN ST)

PO BOX 6008 | QUEANBEYAN NSW 2620
PH: (02) 6299 5817 FAX: (02) 6299 5863
EMAIL: [email protected]
www.aluforminteriors.com.au
 PeakForm SUPRAFINE 15 XL 2
PeakForm SUPRAFINE XL 2 suspension system is a refined narrow profile,
exposed 15mm “tee” grid, suitable for tegular edge ceiling panels.

Main Bar: SUPRAFINE 15 with Superlock Clip (bulb-to-bulb connection)

Item Number Dimensions Rout Centres Content / Carton Weight / Carton

length (mm) height (mm) width (mm) mm pcs lm kg

HBP 75 40 42 3600 43 15 100 20 72,00 22,50

Cross Runner: SUPRAFINE 15 XL2 (stab system, override)

HBP 75 30 42 1200 43 15 300 60 72,00 20,70

HBP 75 20 42 600 43 15 – 60 36,00 10,30

Section Drawings

Universal Main Bars SUPRAFINE 15

Length

3600 50 100 33 x 100 100 50

Cross Runner SUPRAFINE 15 XL2 Cross Runner SUPRAFINE 15 XL

2

Length

1200 300 2 x 300 300 600

System Drawing and Installation (Typical modules are 1200 x 600mm and 600 x 600mm. Special sizes available
upon request.)
Standard lay-in installation of 15mm exposed suspension system
for Tegular Edge Panels.

Module Installation Quantities required per 100m2 (no waste included)

6 Ceiling Main Bar Hangers 1 Main Bar 2 Cross Runner 3 Cross Runner 4 Hanger
Panels centres centres 1200mm 600mm

1200 x 600mm 1200mm 1200mm 23 pcs 139 pcs - 70 pcs

139 pcs
600mm 1200mm 48 pcs - 139 pcs 140 pcs

600 x 600mm 1200mm 1200mm 23 pcs 139 pcs 139 pcs 70 p cs

278 pcs -
600mm 1200mm 48 pcs 278 pcs 140 pcs

5 The chart is for general guidance only.

Perimeter trim quantity depends upon room geometry

Cross Runner alignment is achieved by locating the tees to the right-hand side of the adjoining section.
All measurements in millimetres. All sizes are nominal.
For perimeter details, hangers and accessories, please refer to pages 6 - 7.

4 For additional information and drawings, please refer to www.armstrongceilings.com.au

19 CARRINGTON STREET (CNR HINCKSMAN ST)

PO BOX 6008 | QUEANBEYAN NSW 2620
PH: (02) 6299 5817 FAX: (02) 6299 5863
EMAIL: [email protected]
www.aluforminteriors.com.au
 PERIMETER TRIMS AND
ACCESSORIES

Perimeter Trims

Item Number Description Length (mm) Content / Carton Weight / Carton

pcs / lm kg

Steel Perimeter Trims:

Roll Formed and Prepainted
HBPT1932H Long Leg Wall Angle 3600 30 / 108 21
HBP 784003 Shadow Line Wall Angle 3600 30 / 108 20

Aluminium Perimeter Trims:

Extruded and Powdercoated
AL008RCPGW Wall Angle for Roll In Clip Attachment 3600 20 / 72 14
AL009RCPGW Shadow Line Wall Angle for Roll In Clip Attachment 3600 20 / 72 14
ALBULK3600GW Bulkhead Trim (suits both 10 and 13mm Pb) 3600 10 / 40 10
AL*CURVE Curved Wall Angle (* any of above Wall Angles) 3600 -/- -
COLRING* Column Ring (* any of above Wall Angles) Defined by column radius

15
19

21
20
32

38
6

10
6

15
20
19 14 19 10
28

HBPT1932H HBP 784003 AL008RCPGW AL009RCPGW ALBULK3600GW

Suspension & Accessories

Grid Accessories

Item Number Description Dimensions Content / Carton Weight / Carton

length (mm) pcs kg

2424 Hook Suspension Clip for 5mm Rod 165 100 2.2
ARM-051 Direct Fix Clip 175 100 2.6
Trclip Suspension Clip for 6mm Threaded Rod 80 100 2.0
M6 Rod 6mm Threaded Rod 1200 50 11.0
ARM-051 M6 Nuts 6mm nuts for Threaded Rod – 200 0.4
DLCC Direct Load Ceiling Clip 80 250 5.5
UHDC Universal Hold Down Clip – 1000 4.065
ALRICS Roll In Clip 65 100 5
5mm 5mm Suspension Rod 4000 40 24.2
2.5mm 2.5mm Suspension Wire 4000 160 25.0
ALRICS 188 Angle Bracket 47 x 47 100 1.2
247 Suspension Rod Angle Bracket 55 100 2.1
274 Suspension Rod Bracket 80 100 2.1
254 Suspension Rod Joiner – 100 0.9
ES4 4" Expansion Sleeve 100 100 5.0
DW50 Drywall Transition Clip – 200 11.0
MBAC Main Beam Adapter Clip – 100 7.1
7895 Grid Touch Up Paint (128g net) – 6 1.3
UPC UPC – Partition Clip – 200 10

UHDC
2424 Trclip and threaded 188 247 UPC
DLCC
rod/nut Partition Clip

274 254 DW50 ES4 TOUCH UP

MBAC
PAINT

6 For additional information and drawings, please refer to www.armstrongceilings.com.au

19 CARRINGTON STREET (CNR HINCKSMAN ST)

PO BOX 6008 | QUEANBEYAN NSW 2620
PH: (02) 6299 5817 FAX: (02) 6299 5863
EMAIL: [email protected]
www.aluforminteriors.com.au
PERIMETER SOLUTIONS
Mineral suspension system.

Perimeter Detailing Recommendations

Square Edge Panels

Grid, Wall Angle and “Square Edge Panel” at Grid, Wall Angle and “Square Edge Panel” at Tee Bar is secured to Wall Angle via Roll In Clip
same level same level

Note: Wall Angles should be fixed to wall at 450mm centres

Tegular Edge Panels

TEGULAR ED
"L" WAL

Panel edge is field “tegulated” at Wall Angle Wall Angle position is dropped to level of face Panel edge is field “tegulated” at Wall Angle
of Panel; Tee Grid is packed at Wall Angle and
Panel is square cut at wall angle

For information on Armstrong Aluminium Grid and Axiom Perimeter /

Pelmet systems, refer to the following brochures.

CEILING SY S T E M S
Between us, ideas become reality™

AXIOM ™
Perimeter Trim

Wall Angle position is dropped to level of face of CEILING SYSTEMS

Panel; Tee Grid is packed at Wall Angle and Armstrong Blue Tongue™
Aluminium Grid and
Between us, ideas become reality ®

Panel is square cut at wall angle

Perimeter/Pelmet Systems

For additional information and drawings, please refer to www.armstrongceilings.com.au 7

19 CARRINGTON STREET (CNR HINCKSMAN ST)

PO BOX 6008 | QUEANBEYAN NSW 2620
PH: (02) 6299 5817 FAX: (02) 6299 5863
EMAIL: [email protected]
www.aluforminteriors.com.au
CEILING SYSTEMS
Between us, ideas become reality™

Specifications Perimeter Detail

Wall Angles should be fixed to wall at 450mm centres.
not to exceed the design ceiling load or as may otherwise be
required to prevent deflection in excess of 1/360 of the span
Scope Exposed ceiling grid members intersecting with the Wall of the spacers or Main Bars. Where light fittings, air
The contractor to furnish all materials, labour and equipment Angle or Shadowline Wall Angle, may either be unfixed, or conditioning fixtures etc are to be supported by the grid
for the erection of the exposed ceiling system where so fastened with a Roll In Clip. system, extra hangers may be required. Down bracing to be
indicated on the architectural drawings.
incorporated in ceiling systems when used externally or
Installation adjacent to opening prone to sudden uplift caused by
Material The Main Bar shall be hung with a 5mm galvanised rod and external wind forces.
Ceiling suspension shall be Armstrong PeakForm two way clip system or 2.5mm wire, accurately levelled. Suspension
exposed, hot dipped galvanised steel system; (either): Prelude * For suspension points greater than 1200mm centres along
points shall be spaced at 1200mm* centres along the Main
XL2 24mm Tee, SupraFine XL2 15mm Tee, or Silhouette XL2 the Main Bar, contact your local Armstrong representative for
Bar. Cross Runner shall intersect and be positively locked to
15mm “shadowline hat” profiles. All materials supplied by load ratings.
Main Bars. Panel Hold Down Clips to be used as required.
Armstrong meet the requirements of Australian Standard
Hangers, Main Bars and Cross Runner shall be spaced so as
2785-2000 “Suspended Ceilings Design and Installation”.

Maximum Fixture Weight Connection Strength

Main Bar to Main Bar (Fixture / Panel Orientation) (SEISMIC)
1200 CT 1200 CT 1200 CT 1200 CT
Main Bar Main Bar
600 CT

600 CT
Cross Runner x 600 HBP734042
Main Bar

Main Bar

Main Bar

Main Bar

Main Bar
1200 CT
Cross Runner x 1200 Minimum KGS to Pull Out
1200 CT 1200 CT 1200 CT Compression / Tension

600 CT
174 kg / 133 kg
1200 CT 1200 CT 1200 CT
Cross Runner
1. FIXTURE* (mm) 1200 x 600 600 x 600 1200 x 300 600 x 600 All Cross Runner exceed 136 kg in both
2. PLANNING MODULE (mm) 1200 x 1200 1200 x 1200 1200 x 600 1200 x 600 compression / tension.
3. HANGER SPACING (mm) 1200 1200 1200 1200
Max Fixture Weight (kgs)
4. PRELUDE 24 21.2 kg 14.0 kg 17.4 kg 14.0 kg
5. SUPRAFINE 15 27.9 kg 13.9 kg 24.9 kg 13.9 kg Loading Parameters
6. SILHOUETTE 15 – – – 14.2 kg • Main Bars at 1200mm centres

Cross Runner to Cross Runner (Fixture / Panel Orientation) • Cross Runner 1200mm at 600mm spacing

600 CT
• Suspension points spaced at 1200mm on
1200 CT 1200 CT 600 CT 1200 CT
Main Bar
Main Bar
Cross Runner x 600
Main Bar

Main Bar

Main Bar

Main Bar

Main Bar
1200 CT

1200 CT
1200 CT

1200 CT

600 CT 600 CT
Cross Runner x 1200 *Note: Additional independent support of
600 CT
heavy fixtures should be considered for
safety purposes.
1200 CT 1200 CT 600 CT 600 CT 1200 CT The above data is based on 1200mm hanger
1. FIXTURE* (mm) 1200 x 600 600 x 600 600 x 600 1200 x 300 spacing, board weight of 4.8kg/m2, maximum
2. PLANNING MODULE (mm) 1200 x 1200 1200 x 1200 600 x 600 1200 x 1200 deflection of tees not to exceed 1/360 of the
3. HANGER SPACING (mm) 1200 1200 1200 1200 span and suspension system installed in
Max Fixture Weight (kgs) accordance with AS2785–2000.
4. PRELUDE 24 10.6 kg 10.6 kg 37.5 kg 17.4 kg
5. SUPRAFINE 15 – – 37.3 kg –
6. SILHOUETTE 15 – – 37.9 kg –

Armstrong, the Global Leader in Acoustic Ceiling Systems

NSW VIC/TAS QLD/NT
Armstrong World Industries Pty. Ltd. Armstrong World Industries Pty. Ltd. Armstrong World Industries Pty. Ltd.
99 Derby Street, 29-39 Mills Road, 6 Barrinia Street,
Silverwater NSW 2128 Braeside VIC 3195 Slacks Creek QLD 4127
Telephone (02) 9748 1588 Telephone (03) 9580 9633 Telephone (07) 3809 5565
Facsimile (02) 9748 8449 Facsimile (03) 9587 5139 Facsimile (07) 3809 5507

SCAN* THIS CODE to

learn more about our
PeakForm Suspension
Systems
*Download a Free QR
code reader app available
from Apple store

www.armstrongceilings.com.au

Printed on Zanders Mega Recycled paper ©2013 Armstrong World Industries Pty Ltd. AWP1113

19 CARRINGTON STREET (CNR HINCKSMAN ST)

PO BOX 6008 | QUEANBEYAN NSW 2620
PH: (02) 6299 5817 FAX: (02) 6299 5863
EMAIL: [email protected]
www.aluforminteriors.com.au