Technical specifications Optical interface specifications
....................................................................................................................................................................................................................................
STM-64/OC-192 interface specifications
Item Characteristics
Location Optical connectors on XFPs. Connectors are mounted on
front panel of modules.
Function Couples STM-64/OC-192 optical data into and out of shelf.
Capacity One STM-64/OC-192 per XFP.
Frequency 9.95 Gb/s
Line code Nonreturn-to-zero (NRZ)
Input Cable Single-mode fiber
Output Cable 5D single-mode fiber with 3.0 in. bending radius
Optical transmitter
Extinction ratio (logic 0 to 1) XI-641: 1310 nm
LS-642: 1550 nm
Center wavelength XI-641: 1310 nm
LS-642: 1550 nm
RMS spectral width IR XI-641: NA (SLM)
LS-642: NA (SLM)
Mating connector type LC
Optical transmission and receiver levels
The following specifications apply to Alcatel-Lucent 1850 TSS-100 with regard to optical
transmission and receiver levels:
Signal Type Module TransmitterTransmitter Output Receiver Sensitivity
Reach Power (dBm) (dBm)
Minimum Maximum Minimum Maximum
STM-1/OC-3 SS-11 IR -15.0 -8.0 -30.0 -8.0
STM-1/OC-3 SL-11 LR -5.0 0.0 -34.0 -10.0
STM-1/OC-3 SL-12 LR -5.0 0.0 -34.0 -10.0
STM-4/OC-12 SS-41 IR -15.0 -8.0 -28.0 -8.0
STM-4/OC-12 SL-41 LR -3.0 2.0 -28.0 -8.0
STM-4/OC-12 SL-42 LR -3.0 2.0 -28.0 -8.0
STM-16/OC-48 SI-161 SR -10.0 3.0 -19.0 3.0
STM-16/OC-48 SS-161 IR -5.0 0.0 -19.0 0.0
....................................................................................................................................................................................................................................
10-10 8DG25698AAAATQZZA
Issue 3 March 2010
Technical specifications Optical interface specifications
....................................................................................................................................................................................................................................
Signal Type Module TransmitterTransmitter Output Receiver Sensitivity
Reach Power (dBm) (dBm)
Minimum Maximum Minimum Maximum
STM-16/OC-48 SL-161 LR -2.0 3.0 -27.0 -9.0
STM-16/OC-48 SL-162 LR -2.0 3.0 -28.0 -9.0
STM-64/OC-192 XI-641 SR -6.0 -1.0 -11.0 0.5
STM-64/OC-192 XS-642 IR -1.0 2.0 -14.0 -1.0
(XFP)
STM-64/OC-192 XS-642 IR -1.0 2.0 -14.0 -1.0
(XFP-E)
STM-64/OC-192 XP1L1-2D2 LR -1.0 2.0 -24.0 -7.0
(XFP-E)
Ethernet interface specifications
GbE interface specifications
Item Characteristics
Location Optical connectors on SFPs. Connectors are mounted on
front panel of main and access modules.
Function Couples GigaBit Ethernet optical data into and out of shelf
Capacity One GE per SFP
Frequency 1 Gb/s
Line code Nonreturn-to-zero (NRZ)
Format IEEE 802.3
Input Cable Multi mode for 1000BASE-SX and single mode for
1000BASE-LX and 1000BASE-ZX
Output Cable Multi mode
Optical transmitter:
Extinction ratio (logic 0 to 1) 9 dB
Center wavelength 850 nm (1000BASE-SX), 1300 nm (1000BASE-LX), 1550
nm (1000BASE-ZX)
RMS spectral width IR 0.85 nm (1000BASE-SX), 4 nm (1000BASE-LX), 1 nm
(1000BASE-ZX)
Mating connector type LC
....................................................................................................................................................................................................................................
8DG25698AAAATQZZA 10-11
Issue 3 March 2010
