Wrenches — Cat Standard Wrenches
Metric Combination Wrench Set, 10 Piece - 233-1632
Warranty: Lifetime
• Increased torque — wrench box end contacts the fastener on the flats rather
than on the corners, preventing rounding of the fastener and allowing for more
torque to be applied
• Concentric or uniform wall thickness on the box end eliminates weak spots while
allowing for a thin wall design for greater accessibility
• Continuous arc open end design evenly distributes applied stress over the entire
radius of the open end, enhancing the wrench strength and life of the tool
• Long handles for better reach and greater applied torque
• Highly polished nickel/chrome plating — tough nickel for corrosion resistance
and chrome plating for wear resistance and a mirror-like finish
Drive Part Number Description Length
— 233-1632 Metric Wrench Set —
10.0 mm 6V-9090 Wrench 171.0 mm (6.73 in)
11.0 mm 6V-9091 Wrench 184.0 mm (7.24 in)
12.0 mm 6V-9092 Wrench 195.0 mm (7.68 in)
13.0 mm 6V-9093 Wrench 207.0 mm (8.15 in)
14.0 mm 6V-9094 Wrench 219.0 mm (8.62 in)
15.0 mm 6V-9095 Wrench 233.0 mm (9.17 in)
16.0 mm 6V-9096 Wrench 242.0 mm (9.53 in)
17.0 mm 6V-9097 Wrench 256.0 mm (10.08 in)
18.0 mm 6V-9098 Wrench 267.0 mm (10.51 in)
19.0 mm 6V-9099 Wrench 280.0 mm (11.02 in)
Fractional Combination Wrenches
Warranty: Lifetime
• 15° angle on open end and 15° offset on box end
• Box end is 12 point except 8H-8502 which is 6 point
• All are polished chrome finish except 9U-5130
Part Number Size Length Part Number Size Length
1S-0253 3/4 in (short) 174.8 mm (6.88 in) 4C-9601 7/8 in 318.3 mm (12.53 in)
1S-0254 9/16 in (short) 165.1 mm (6.50 in) 4C-9602 15/16 in 338.1 mm (13.31 in)
4C-9592 3/8 in 165.1 mm (6.50 in) 4C-9603 1 in 357.1 mm (14.06 in)
4C-9593 7/16 in 184.2 mm (7.25 in) 4C-9604 1/4 in 114.3 mm (4.50 in)
4C-9594 1/2 in 204 mm (8.03 in) 4C-9605 5/16 in 124 mm (4.88 in)
4C-9595 9/16 in 222.3 mm (8.75 in) 4C-9606 3/8 in 132.6 mm (5.22 in)
4C-9596 5/8 in 241.3 mm (9.50 in) 4C-9607 7/16 in 138.2 mm (5.44 in)
4C-9597 11/16 in 260.4 mm (10.25 in) 4C-9608 1/2 in 146.1 mm (5.75 in)
4C-9598 3/4 in 280.2 mm (11.03 in) 4C-9609 5/8 in 157.2 mm (6.19 in)
4C-9599 13/16 in 299.2 mm (11.78 in) 4C-9611 11/16 in 167.4 mm (6.59 in)
30
