RHS MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS

GREEN
105˚C Use, Miniature, High-Ripple, Long Life Capacitors CAP
105˚C
5000hours

●
Higher ripple current.
●
Guarantees 4000 to 5000 hours at 105℃.
●
Best-suited to electronic ballast.

High ripple, Long life

RHS RJ4

Marking color : White print on a black sleeve

Specifications
Item Performance
Category temperature range (℃) −40 to ＋105 (−25 to +105 at 350V or more)
Rated Voltage (V) 160 to 450
Tolerence at rated capacitance (%) ±20 (20℃,120Hz)

CV 1000：Less than 0.06CV＋40 (after 1 minutes) CV<1000：Less than 0.03CV＋70 (after 1 minutes)
Leakage current (µA)
C : Rated capacitance (µF), V : Rated voltage (V)
(20℃)

Rated voltage (V) 160 to 250 350 to 400 450

Tangent of loss angle Tangent of loss angle 0.12 0.15 0.20

(20℃,120Hz)
Rated voltage (V) 160 to 250 350 to 450
Characteristics at high Ｚ−25℃/Ｚ＋20℃ 3 6
and low temperature Impedance ratio
Ｚ−40℃/Ｚ＋20℃ 4 −
(120Hz)

φ10 : 4000 hours

Test time
φ12.5 to 18 : 5000 hours
Endurance (105℃)
Leakage current The initial specified value or less
(Applied ripple current)
Aluminum Electrolytic Capacitors

Capacitance change Within −20% to +20% of initial value

Tangent of loss angle 300% or less of the initial specified value
Miniature

Test time 1000 hours

Leakage current The initial specified value or less
Shelf life (105℃) Capacitance change Within −20% to +20% of initial value
Tangent of loss angle 200% or less of the initial specified value
Voltage application treatment

Applicable Standards JIS C 5101-01, -04 1998 (IEC 60384-1 1992, 60384-4 1985)

Outline Drawing Unit : mm Coefficient of Frequency for Rated Ripple Current

Rated Frequency (Hz) 10k
50,60 120 300 1k
voltage (V) or more
Vent Sleeve φd±0.05 copper clad steel wire (tinned)
160 to 450 0.75 1.00 1.20 1.35 1.50
φD＋0.5max.

Part numbering system (example : 400V10µF)

F±0.5

RHS ̶ 400 V 100 M Ⅰ5 # B

5
Rated voltage Rated capacitance Capacitance Casing Additional
L＋αmax. 15min. min. Series code
symbol symbol tolerance symbol symbol symbol

φD 10 12.5 16 18
F 5.0 5.0 7.5 7.5
φd 0.6 0.6 0.8 0.8
α 2.0 2.5
2.0
a
2.5
2.0 a 2.5
2.0

NOTE
Design, Specifications are subject to change without notice.
CAT.No.2010/2011Ea CAT.No.2006/2007E(2006.10.1)
Ask factory for technical specifications before purchase and/or use.
 ®
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RHS
■Standard Ratings
Rated voltage(V) 160 200 250 350
Item Rated Rated ripple Rated Rated ripple Rated Rated ripple Rated Rated ripple
capacitance ESR current capacitance ESR current capacitance ESR current capacitance ESR current
Case Casing
φD×L（mm） symbol µF Ω mArms µF Ω mArms µF Ω mArms µF Ω mArms
10×12.5 H3 − − − 4.7 41 60 4.7 41 60 3.3 72 50
10×16 H4 10 19 95 10 19 95 − − − 4.7 51 65
10×20 H5 22 9.0 145 22 9.0 145 10 19 105 − − −
12.5×20 Ⅰ5 33 6.0 190 33 6.0 190 − − − 10 24 120
47 4.0 280 47 4.0 280 22 9.0 180 22 11 180
12.5×25 Ⅰ6
− − − − − − 33 6.0 250 − − −
16×20 J5 47 4.0 280 47 4.0 280 33 6.0 250 22 11 180
16×25 J6 100 2.0 380 − − − 47 4.0 300 33 7.0 210
16×31.5 J7 − − − 100 2.0 410 100 2.0 410 − − −
16×35.5 J8 − − − − − − − − − 47 5.0 300
18×20 K5 100 2.0 380 − − − 47 4.0 300 − − −
18×25 K6 − − − 100 2.0 410 100 2.0 410 − − −
18×31.5 K7 − − − − − − − − − 47 5.0 300
18×35.5 K8 220 0.90 630 − − − − − − − − −

Rated voltage(V) 400 450

Rated Rated ripple Rated Rated ripple
Item capacitance ESR current capacitance ESR current
Case Casing
φD×L（mm） symbol µF Ω mArms µF Ω mArms
10×12.5 H3 2.2 109 40 1.0 318 30
10×16 H4 3.3 72 50 2.2 145 45
10×20 H5 4.7 51 70 3.3 96 65
12.5×20 Ⅰ5 10 24 120 − − −
− − − 4.7 68 80
12.5×25 Ⅰ6
− − − 10 32 140
22 11 200 22 14 220
16×25 J6
− − − 33 10 280
16×31.5 J7 33 7.0 245 47 5.6 420
16×35.5 J8 − − − 68 3.9 520

Aluminum Electrolytic Capacitors

18×20 K5 22 11 200 − − −
18×25 K6 33 7.0 245 − − −
18×31.5 K7 47 5.0 300 82 3.2 580

Miniature
18×35.5 K8 − − − 100 2.6 750
18×40 K9 − − − 120 2.2 800
20×40 L9 − − − 150 1.7 860
22×41 M9 − − − 180 1.4 920
(Note) ESR : 20℃, 120Hz ; Rated ripple current : 105℃, 120Hz

NOTE
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use. CAT.No.2010/2011Ea