0% found this document useful (0 votes)

306 views40 pages

2x5 - Design Report

This document describes the wind load calculation for a structure with multiple modules. It provides the dimensions of the modules, wind speed calculations, pressure coefficients, and resulting loads on each member. Tables show member properties and load combinations that will be analyzed.

Uploaded by

Sharma Vishal

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

306 views40 pages

2x5 - Design Report

Uploaded by

Sharma Vishal

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 40

Wind Load Calculation

Module Dimenstion :- 2.278 x 1.134 x 35

Area of Module :- 2.583 sqm
Module Weight :- 29.0 kg
:- 0.28 kN
Load on Each Purlin :- 0.125 kN/m

Wind Speed Vb :- 150 kmph

Vb :- 41.67 m/s

Design Wind Speed Vz :- Vb x K1 x K2 x K3 x K4

Where,
K1 :- 0.915 Cl 6.3.1 IS 875 Part-3
K2 :- 0.91 Cl 6.3.2.2 IS 875 Part-3
K3 :- 1.00 Cl 6.3.3.1 IS 875 Part-3
K4 :- 1.00 Cl 6.3.4 IS 875 Part-3

Design Wind Speed Vz :- 34.70 m/s

Wind Pressure Pz :- 0.6 x Vz X Vz

Pz :- 722.31 N/sqm
Pz :- 0.722 kN/sqm

Design Wind Pressure Pd :- Kd x Ka x Kc x Pz

Where,
Kd :- 0.90 Cl 7.2.1 IS 875 Part-3
Area of Table :- 26.31 sqm > 10 sqm
Ka :- 1.00 Cl 7.2.2 IS 875 Part-3
Kc :- 1.00 Cl 7.3.3.13 IS 875 Part-3

Design Wind Pressure Pd :- 0.650 kN/sqm

Check Design Wind Pressure Pd :- 0.7 x PZ

Check Design Wind Pressure Pd :- 0.506 kN/sqm

Taken Dsesign Wind Presure Pz :- 0.650 kN/sqm

Presure Coefficient For 20 Degree mono Slope

Upward Coefficient (-Cft) :- 1.30
Downward Coefficient (+Cft) :- 0.80

Upward Wind Pressure :- 0.845 kN/sqm

Downward Wind Pressure :- 0.520 kN/sqm
Upward Load on Each Module :- 2.183 kN
Downward Load on Each Module :- 1.343 kN

Upward Load on Each Purlin :- 0.963 kN/m

Downward Load on EachPurlin :- 0.592 kN

Members Details Length (L) Web (w) Flenge (f) (L/w) Z Dirx (L/f) x Dirx Cft
Column-1 0.501 0.1 0.05 5.01 10.02 2.05
Column-2 1.411 0.08 0.05 17.64 28.22 2.05
Rafter 4.018 0.08 0.05 50.23 80.36 2.05
Bracing 1.284 0.04 0.04 32.10 32.10 2.10

Load In +X Direction Load In -X Direction

Load on Column-1 :- 0.046 kN/m Load on Column-1 :- 0.046 kN/m
Load on Column-2 :- 0.056 kN/m Load on Column-2 :- 0.056 kN/m
Load on Bracing :- 0.046 kN/m Load on Bracing :- 0.046 kN/m

Load In +Z Direction Load In -Z Direction

Load on Column-1 :- 0.088 kN/m Load on Column-1 :- 0.088 kN/m
Load on Column-2 :- 0.083 kN/m Load on Column-2 :- 0.083 kN/m
Load on Rafter :- 0.096 kN/m Load on Rafter :- 0.096 kN/m
Load on Bracing :- 0.046 kN/m Load on Bracing :- 0.046 kN/m

2.500m

Column to Column
3D View
Job Title:

Client:

Engineer:
STAAD SPACE DXF IMPORT OF 2X5_R0
START JOB INFORMATION
ENGINEER DATE 30Jan24
END JOB INFORMATION
INPUT WIDTH 79
UNIT MMS NEWTON
JOINT COORDINATES
1 0 0 0; 2 93.9693 34.2021 0; 3 637.842 232.156 0; 4 1597.48 581.434 0;
5 1887.84 687.118 0; 6 2253.38 820.164 0; 7 3137.84 1142.08 0;
8 3756.89 1367.4 0; 9 3775.68 1374.24 0; 10 3137.84 392.081 0;
11 3137.84 268.98 0; 12 637.842 268.98 0; 13 0 0 2500.01;
14 93.9693 34.2021 2500.01; 15 637.842 232.156 2500.01;
16 1597.48 581.434 2500.01; 17 1887.84 687.118 2500.01;
18 2253.38 820.164 2500.01; 19 3137.84 1142.08 2500.01;
20 3756.89 1367.4 2500.01; 21 3775.68 1374.24 2500.01;
22 3137.84 392.081 2500.01; 23 3137.84 268.98 2500.01;
24 637.842 268.98 2500.01; 25 0 0 5000.01; 26 93.9693 34.2021 5000.01;
27 637.842 232.156 5000.01; 28 1597.48 581.434 5000.01;
29 1887.84 687.118 5000.01; 30 2253.38 820.164 5000.01;
31 3137.84 1142.08 5000.01; 32 3756.89 1367.4 5000.01;
33 3775.68 1374.24 5000.01; 34 3137.84 392.081 5000.01;
35 3137.84 268.98 5000.01; 36 637.842 268.98 5000.01;
37 93.9693 34.2021 375.001; 38 1597.48 581.434 375.001;
39 2253.38 820.164 375.001; 40 3756.89 1367.4 375.001;
41 93.9693 34.2021 5375.01; 42 1597.48 581.434 5375.01;
43 2253.38 820.164 5375.01; 44 3756.89 1367.4 5375.01;
MEMBER INCIDENCES
1 1 2; 2 2 3; 3 3 4; 4 4 5; 5 5 6; 6 6 7; 7 7 8; 8 8 9; 9 7 10; 10 10 11;
11 3 12; 12 10 5; 13 13 14; 14 14 15; 15 15 16; 16 16 17; 17 17 18; 18 18 19;
19 19 20; 20 20 21; 21 19 22; 22 22 23; 23 15 24; 24 22 17; 25 25 26; 26 26 27;
27 27 28; 28 28 29; 29 29 30; 30 30 31; 31 31 32; 32 32 33; 33 31 34; 34 34 35;
35 27 36; 36 34 29; 37 37 2; 38 2 14; 39 14 26; 40 26 41; 41 38 4; 42 4 16;
43 16 28; 44 28 42; 45 39 6; 46 6 18; 47 18 30; 48 30 43; 49 40 8; 50 8 20;
51 20 32; 52 32 44;
DEFINE MATERIAL START
ISOTROPIC STEEL
E 199947
POISSON 0.3
DENSITY 7.68191e05
ALPHA 6.5e06
DAMP 0.03
G 77221
TYPE STEEL
STRENGTH RY 1.5 RT 1.2
END DEFINE MATERIAL
MEMBER PROPERTY COLDFORMED INDIAN
9 TO 11 21 TO 23 33 TO 35 TABLE ST 100CS50X3.15
1 TO 8 13 TO 20 25 TO 32 TABLE ST 80CS50X2
37 TO 52 TABLE ST 80CS50X2
D:\2024-25\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.STD Page 1 of 0
Job Title:

Client:

Engineer:
12 24 36 TABLE ST 40LU40X3.15
CONSTANTS
BETA 20 MEMB 37 TO 52
MATERIAL STEEL ALL
SUPPORTS
11 12 23 24 35 36 FIXED
MEMBER TRUSS
12 24 36
MEMBER OFFSET
37 TO 52 START 0 40 0
37 TO 52 END 0 40 0
UNIT METER KN
LOAD 1 LOADTYPE Dead TITLE DEAD LOAD
SELFWEIGHT Y 1
MEMBER LOAD
37 TO 52 UNI GY 0.125
LOAD 2 LOADTYPE Wind TITLE UPWARD WL
MEMBER LOAD
37 TO 52 UNI GY 0.963
LOAD 3 LOADTYPE Wind TITLE DOWNWARD WL
MEMBER LOAD
37 TO 52 UNI GY 0.592
LOAD 4 LOADTYPE Wind TITLE WL IN +X DIRX
MEMBER LOAD
11 23 35 UNI GX 0.046
9 10 21 22 33 34 UNI GX 0.056
12 24 36 UNI GX 0.046
LOAD 5 LOADTYPE Wind TITLE WL IN X DIRX
MEMBER LOAD
11 23 35 UNI GX 0.046
9 10 21 22 33 34 UNI GX 0.056
12 24 36 UNI GX 0.046
LOAD 6 LOADTYPE Wind TITLE WL IN +Z DIRX
MEMBER LOAD
11 23 35 UNI GZ 0.088
9 10 21 22 33 34 UNI GZ 0.083
1 TO 8 13 TO 20 25 TO 32 UNI GZ 0.096
12 24 36 UNI GZ 0.046
LOAD 7 LOADTYPE Wind TITLE WL IN Z DIRX
MEMBER LOAD
11 23 35 UNI GZ 0.088
9 10 21 22 33 34 UNI GZ 0.083
1 TO 8 13 TO 20 25 TO 32 UNI GZ 0.096
12 24 36 UNI GZ 0.046
LOAD COMB 8 DL+ UPWARD WL
1 1.0 2 1.0
LOAD COMB 9 DL+ UPWARD WL+ WL IN +X DIRX
1 1.0 2 1.0 4 1.0
LOAD COMB 10 DL+ UPWARD WL+ WL IN X DIRX
D:\2024-25\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.STD Page 2 of 0
Job Title:

Client:

Engineer:
1 1.0 2 1.0 5 1.0
LOAD COMB 11 DL+ UPWARD WL+ WL IN +Z DIRX
1 1.0 2 1.0 6 1.0
LOAD COMB 12 DL+ UPWARD WL+ WL IN Z DIRX
1 1.0 2 1.0 7 1.0
LOAD COMB 13 DL+DOWNWARD WL
1 1.0 3 1.0
LOAD COMB 14 DL+ DOWNWARD WL+ WL IN +X DIRX
1 1.0 3 1.0 4 1.0
LOAD COMB 15 DL+ DOWNWARD WL+ WL INX DIRX
1 1.0 3 1.0 5 1.0
LOAD COMB 16 DL+ DOWNWARD WL+ WL IN +Z DIRX
1 1.0 3 1.0 6 1.0
LOAD COMB 17 DL+ DOWNWARD WL+ WL IN Z DIRX
1 1.0 3 1.0 7 1.0
PERFORM ANALYSIS PRINT ALL
PARAMETER 1
CODE IS801
FYLD 350000 ALL
CHECK CODE ALL
FINISH

D:\2024-25\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.STD Page 3 of 0

30 January 2024 12:10

PAGE NO. 1

****************************************************
* *
* STAAD.Pro 2023 *
* Version 23.00.01.25 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= JAN 31, 2024 *
* Time= 21:35:28 *
* *
* Licensed to: only @::LAVteam::® *
****************************************************

1. STAAD SPACE DXF IMPORT OF 2X5_R0

INPUT FILE: D:\2024‐25\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.STD
2. START JOB INFORMATION
3. ENGINEER DATE 30‐JAN‐24
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT MMS NEWTON
7. JOINT COORDINATES
8. 1 0 0 0; 2 93.9693 34.2021 0; 3 637.842 232.156 0; 4 1597.48 581.434 0
9. 5 1887.84 687.118 0; 6 2253.38 820.164 0; 7 3137.84 1142.08 0
10. 8 3756.89 1367.4 0; 9 3775.68 1374.24 0; 10 3137.84 392.081 0
11. 11 3137.84 ‐268.98 0; 12 637.842 ‐268.98 0; 13 0 0 2500.01
12. 14 93.9693 34.2021 2500.01; 15 637.842 232.156 2500.01
13. 16 1597.48 581.434 2500.01; 17 1887.84 687.118 2500.01
14. 18 2253.38 820.164 2500.01; 19 3137.84 1142.08 2500.01
15. 20 3756.89 1367.4 2500.01; 21 3775.68 1374.24 2500.01
16. 22 3137.84 392.081 2500.01; 23 3137.84 ‐268.98 2500.01
17. 24 637.842 ‐268.98 2500.01; 25 0 0 5000.01; 26 93.9693 34.2021 5000.01
18. 27 637.842 232.156 5000.01; 28 1597.48 581.434 5000.01
19. 29 1887.84 687.118 5000.01; 30 2253.38 820.164 5000.01
20. 31 3137.84 1142.08 5000.01; 32 3756.89 1367.4 5000.01
21. 33 3775.68 1374.24 5000.01; 34 3137.84 392.081 5000.01
22. 35 3137.84 ‐268.98 5000.01; 36 637.842 ‐268.98 5000.01
23. 37 93.9693 34.2021 ‐375.001; 38 1597.48 581.434 ‐375.001
24. 39 2253.38 820.164 ‐375.001; 40 3756.89 1367.4 ‐375.001
25. 41 93.9693 34.2021 5375.01; 42 1597.48 581.434 5375.01
26. 43 2253.38 820.164 5375.01; 44 3756.89 1367.4 5375.01
27. MEMBER INCIDENCES
28. 1 1 2; 2 2 3; 3 3 4; 4 4 5; 5 5 6; 6 6 7; 7 7 8; 8 8 9; 9 7 10; 10 10 11
29. 11 3 12; 12 10 5; 13 13 14; 14 14 15; 15 15 16; 16 16 17; 17 17 18; 18 18 19
30. 19 19 20; 20 20 21; 21 19 22; 22 22 23; 23 15 24; 24 22 17; 25 25 26; 26 26 27
31. 27 27 28; 28 28 29; 29 29 30; 30 30 31; 31 31 32; 32 32 33; 33 31 34; 34 34 35
32. 35 27 36; 36 34 29; 37 37 2; 38 2 14; 39 14 26; 40 26 41; 41 38 4; 42 4 16
33. 43 16 28; 44 28 42; 45 39 6; 46 6 18; 47 18 30; 48 30 43; 49 40 8; 50 8 20
34. 51 20 32; 52 32 44
35. DEFINE MATERIAL START
36. ISOTROPIC STEEL
37. E 199947
38. POISSON 0.3

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 1 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 ‐‐ PAGE NO. 2

39. DENSITY 7.68191E‐05

40. ALPHA 6.5E‐06
41. DAMP 0.03
42. G 77221
43. TYPE STEEL
44. STRENGTH RY 1.5 RT 1.2
45. END DEFINE MATERIAL
46. MEMBER PROPERTY COLDFORMED INDIAN
47. 9 TO 11 21 TO 23 33 TO 35 TABLE ST 100CS50X3.15
48. 1 TO 8 13 TO 20 25 TO 32 TABLE ST 80CS50X2
49. 37 TO 52 TABLE ST 80CS50X2
50. 12 24 36 TABLE ST 40LU40X3.15
51. CONSTANTS
52. BETA 20 MEMB 37 TO 52
53. MATERIAL STEEL ALL
54. SUPPORTS
55. 11 12 23 24 35 36 FIXED
56. MEMBER TRUSS
57. 12 24 36
58. MEMBER OFFSET
59. 37 TO 52 START 0 40 0
60. 37 TO 52 END 0 40 0
61. UNIT METER KN
62. LOAD 1 LOADTYPE DEAD TITLE DEAD LOAD
63. SELFWEIGHT Y ‐1
64. MEMBER LOAD
65. 37 TO 52 UNI GY ‐0.125
66. LOAD 2 LOADTYPE WIND TITLE UPWARD WL
67. MEMBER LOAD
68. 37 TO 52 UNI GY 0.963
69. LOAD 3 LOADTYPE WIND TITLE DOWNWARD WL
70. MEMBER LOAD
71. 37 TO 52 UNI GY ‐0.592
72. LOAD 4 LOADTYPE WIND TITLE WL IN +X DIRX
73. MEMBER LOAD
74. 11 23 35 UNI GX 0.046
75. 9 10 21 22 33 34 UNI GX 0.056
76. 12 24 36 UNI GX 0.046
77. LOAD 5 LOADTYPE WIND TITLE WL IN ‐X DIRX
78. MEMBER LOAD
79. 11 23 35 UNI GX ‐0.046
80. 9 10 21 22 33 34 UNI GX ‐0.056
81. 12 24 36 UNI GX ‐0.046
82. LOAD 6 LOADTYPE WIND TITLE WL IN +Z DIRX
83. MEMBER LOAD
84. 11 23 35 UNI GZ 0.088
85. 9 10 21 22 33 34 UNI GZ 0.083
86. 1 TO 8 13 TO 20 25 TO 32 UNI GZ 0.096
87. 12 24 36 UNI GZ 0.046
88. LOAD 7 LOADTYPE WIND TITLE WL IN ‐Z DIRX
89. MEMBER LOAD
90. 11 23 35 UNI GZ ‐0.088
91. 9 10 21 22 33 34 UNI GZ ‐0.083
92. 1 TO 8 13 TO 20 25 TO 32 UNI GZ ‐0.096
93. 12 24 36 UNI GZ ‐0.046
94. LOAD COMB 8 DL+ UPWARD WL

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 2 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 ‐‐ PAGE NO. 3

95. 1 1.0 2 1.0

96. LOAD COMB 9 DL+ UPWARD WL+ WL IN +X DIRX
97. 1 1.0 2 1.0 4 1.0
98. LOAD COMB 10 DL+ UPWARD WL+ WL IN ‐X DIRX
99. 1 1.0 2 1.0 5 1.0
100. LOAD COMB 11 DL+ UPWARD WL+ WL IN +Z DIRX
101. 1 1.0 2 1.0 6 1.0
102. LOAD COMB 12 DL+ UPWARD WL+ WL IN ‐Z DIRX
103. 1 1.0 2 1.0 7 1.0
104. LOAD COMB 13 DL+DOWNWARD WL
105. 1 1.0 3 1.0
106. LOAD COMB 14 DL+ DOWNWARD WL+ WL IN +X DIRX
107. 1 1.0 3 1.0 4 1.0
108. LOAD COMB 15 DL+ DOWNWARD WL+ WL IN‐X DIRX
109. 1 1.0 3 1.0 5 1.0
110. LOAD COMB 16 DL+ DOWNWARD WL+ WL IN +Z DIRX
111. 1 1.0 3 1.0 6 1.0
112. LOAD COMB 17 DL+ DOWNWARD WL+ WL IN ‐Z DIRX
113. 1 1.0 3 1.0 7 1.0
114. PERFORM ANALYSIS PRINT ALL

P R O B L E M S T A T I S T I C S
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

NUMBER OF JOINTS 44 NUMBER OF MEMBERS 52

NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 6

Using 64‐bit analysis engine.

SOLVER USED IS THE IN‐CORE ADVANCED MATH SOLVER

TOTAL PRIMARY LOAD CASES = 7, TOTAL DEGREES OF FREEDOM = 228

TOTAL LOAD COMBINATION CASES = 10 SO FAR.

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 3 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 ‐‐ PAGE NO. 4

LOADING 1 LOADTYPE DEAD TITLE DEAD LOAD

‐‐‐‐‐‐‐‐‐‐‐

SELFWEIGHT Y ‐1.000

ACTUAL WEIGHT OF THE STRUCTURE = 1.403 KN

MEMBER LOAD ‐ UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

37 ‐0.1250 GY 0.00 0.38

38 ‐0.1250 GY 0.00 2.50
39 ‐0.1250 GY 0.00 2.50
40 ‐0.1250 GY 0.00 0.37
41 ‐0.1250 GY 0.00 0.38
42 ‐0.1250 GY 0.00 2.50
43 ‐0.1250 GY 0.00 2.50
44 ‐0.1250 GY 0.00 0.37
45 ‐0.1250 GY 0.00 0.38
46 ‐0.1250 GY 0.00 2.50
47 ‐0.1250 GY 0.00 2.50
48 ‐0.1250 GY 0.00 0.37
49 ‐0.1250 GY 0.00 0.38
50 ‐0.1250 GY 0.00 2.50
51 ‐0.1250 GY 0.00 2.50
52 ‐0.1250 GY 0.00 0.37

LOADING 2 LOADTYPE WIND TITLE UPWARD WL

‐‐‐‐‐‐‐‐‐‐‐

MEMBER LOAD ‐ UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

37 0.9630 GY 0.00 0.38

38 0.9630 GY 0.00 2.50
39 0.9630 GY 0.00 2.50
40 0.9630 GY 0.00 0.37
41 0.9630 GY 0.00 0.38
42 0.9630 GY 0.00 2.50
43 0.9630 GY 0.00 2.50
44 0.9630 GY 0.00 0.37
45 0.9630 GY 0.00 0.38
46 0.9630 GY 0.00 2.50
47 0.9630 GY 0.00 2.50
48 0.9630 GY 0.00 0.37
49 0.9630 GY 0.00 0.38
50 0.9630 GY 0.00 2.50
51 0.9630 GY 0.00 2.50
52 0.9630 GY 0.00 0.37

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 4 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 5

LOADING 3 LOADTYPE WIND TITLE DOWNWARD WL

MEMBER LOAD UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

37 0.5920 GY 0.00 0.38

38 0.5920 GY 0.00 2.50
39 0.5920 GY 0.00 2.50
40 0.5920 GY 0.00 0.37
41 0.5920 GY 0.00 0.38
42 0.5920 GY 0.00 2.50
43 0.5920 GY 0.00 2.50
44 0.5920 GY 0.00 0.37
45 0.5920 GY 0.00 0.38
46 0.5920 GY 0.00 2.50
47 0.5920 GY 0.00 2.50
48 0.5920 GY 0.00 0.37
49 0.5920 GY 0.00 0.38
50 0.5920 GY 0.00 2.50
51 0.5920 GY 0.00 2.50
52 0.5920 GY 0.00 0.37

LOADING 4 LOADTYPE WIND TITLE WL IN +X DIRX

MEMBER LOAD UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

11 0.0460 GX 0.00 0.50

23 0.0460 GX 0.00 0.50
35 0.0460 GX 0.00 0.50
9 0.0560 GX 0.00 0.75
10 0.0560 GX 0.00 0.66
21 0.0560 GX 0.00 0.75
22 0.0560 GX 0.00 0.66
33 0.0560 GX 0.00 0.75
34 0.0560 GX 0.00 0.66
12 0.0460 GX 0.00 1.28
24 0.0460 GX 0.00 1.28
36 0.0460 GX 0.00 1.28

LOADING 5 LOADTYPE WIND TITLE WL IN X DIRX

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 5 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 6

MEMBER LOAD UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

11 0.0460 GX 0.00 0.50

LOADING 6 LOADTYPE WIND TITLE WL IN +Z DIRX

MEMBER LOAD UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

11 0.0880 GZ 0.00 0.50

23 0.0880 GZ 0.00 0.50
35 0.0880 GZ 0.00 0.50
9 0.0830 GZ 0.00 0.75
10 0.0830 GZ 0.00 0.66
21 0.0830 GZ 0.00 0.75
22 0.0830 GZ 0.00 0.66
33 0.0830 GZ 0.00 0.75
34 0.0830 GZ 0.00 0.66
1 0.0960 GZ 0.00 0.10
2 0.0960 GZ 0.00 0.58
3 0.0960 GZ 0.00 1.02
4 0.0960 GZ 0.00 0.31
5 0.0960 GZ 0.00 0.39
6 0.0960 GZ 0.00 0.94
7 0.0960 GZ 0.00 0.66
8 0.0960 GZ 0.00 0.02
13 0.0960 GZ 0.00 0.10
14 0.0960 GZ 0.00 0.58
15 0.0960 GZ 0.00 1.02
16 0.0960 GZ 0.00 0.31
17 0.0960 GZ 0.00 0.39
18 0.0960 GZ 0.00 0.94
19 0.0960 GZ 0.00 0.66
20 0.0960 GZ 0.00 0.02
25 0.0960 GZ 0.00 0.10
26 0.0960 GZ 0.00 0.58
27 0.0960 GZ 0.00 1.02

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 6 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 7

28 0.0960 GZ 0.00 0.31

29 0.0960 GZ 0.00 0.39
30 0.0960 GZ 0.00 0.94
31 0.0960 GZ 0.00 0.66
32 0.0960 GZ 0.00 0.02
12 0.0460 GZ 0.00 1.28
24 0.0460 GZ 0.00 1.28
36 0.0460 GZ 0.00 1.28

LOADING 7 LOADTYPE WIND TITLE WL IN Z DIRX

MEMBER LOAD UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

11 0.0880 GZ 0.00 0.50

FOR LOADING 1

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 7 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 8

APPLIED JOINT EQUIVALENT LOADS

JOINT FORCEX FORCEY FORCEZ MOMX MOMY MOMZ
18.23982E121.48261E03 0.00000E+00 0.00000E+00 0.00000E+002.32200E05
2 7.76328E092.32377E01 0.00000E+00 7.87363E022.49325E107.54609E04
3 1.54719E103.66375E02 0.00000E+00 0.00000E+00 0.00000E+001.64378E03
4 7.87751E092.42035E01 0.00000E+00 7.87363E022.49325E10 2.19991E03
5 1.56663E102.17440E02 0.00000E+00 0.00000E+00 0.00000E+001.29666E04
6 7.61679E092.42035E01 0.00000E+00 7.87363E022.49325E101.70569E03
71.85948E104.30514E02 0.00000E+00 0.00000E+00 0.00000E+00 1.04933E03
8 7.56032E092.32377E01 0.00000E+00 7.87363E022.49325E10 1.00680E03
9 7.66575E132.96465E04 0.00000E+00 0.00000E+00 0.00000E+00 9.28427E07
10 1.22011E104.77625E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
11 0.00000E+001.70374E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
12 0.00000E+001.29157E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
138.23982E121.48261E03 0.00000E+00 0.00000E+00 0.00000E+002.32200E05
14 2.69617E093.96695E01 0.00000E+006.45555E07 1.53574E097.54609E04
15 1.54719E103.66375E02 0.00000E+00 0.00000E+00 0.00000E+001.64378E03
16 2.81041E094.06353E01 0.00000E+006.45555E07 1.53574E09 2.19991E03
17 1.56663E102.17440E02 0.00000E+00 0.00000E+00 0.00000E+001.29666E04
18 2.54969E094.06353E01 0.00000E+006.45555E07 1.53574E091.70569E03
191.85948E104.30514E02 0.00000E+00 0.00000E+00 0.00000E+00 1.04933E03
20 2.49321E093.96695E01 0.00000E+006.45555E07 1.53574E09 1.00680E03
21 7.66575E132.96465E04 0.00000E+00 0.00000E+00 0.00000E+00 9.28427E07
22 1.22011E104.77625E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
23 0.00000E+001.70374E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
24 0.00000E+001.29157E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
258.23982E121.48261E03 0.00000E+00 0.00000E+00 0.00000E+002.32200E05
261.51785E092.32376E01 0.00000E+007.87357E024.46299E107.54609E04
27 1.54719E103.66375E02 0.00000E+00 0.00000E+00 0.00000E+001.64378E03
281.40361E092.42034E01 0.00000E+007.87357E024.46299E10 2.19991E03
29 1.56663E102.17440E02 0.00000E+00 0.00000E+00 0.00000E+001.29666E04
301.66434E092.42034E01 0.00000E+007.87357E024.46299E101.70569E03
311.85948E104.30514E02 0.00000E+00 0.00000E+00 0.00000E+00 1.04933E03
321.72081E092.32376E01 0.00000E+007.87357E024.46299E10 1.00680E03
33 7.66575E132.96465E04 0.00000E+00 0.00000E+00 0.00000E+00 9.28427E07
34 1.22011E104.77625E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
35 0.00000E+001.70374E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
36 0.00000E+001.29157E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
371.25624E092.89974E02 0.00000E+00 1.81234E03 2.35355E11 5.02495E11
381.25624E092.89974E02 0.00000E+00 1.81234E03 2.35355E11 5.02495E11
391.25624E092.89974E02 0.00000E+00 1.81234E03 2.35355E11 5.02495E11
401.25624E092.89974E02 0.00000E+00 1.81234E03 2.35355E11 5.02495E11
41 2.25090E102.89973E02 0.00000E+001.81233E031.62679E119.00359E12
42 2.25090E102.89973E02 0.00000E+001.81233E031.62679E119.00359E12
43 2.25090E102.89973E02 0.00000E+001.81233E031.62679E119.00359E12
44 2.25090E102.89973E02 0.00000E+001.81233E031.62679E119.00359E12

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 1

LOADTYPE DEAD TITLE DEAD LOAD

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 8 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 9

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).

(FORCES IN NONGLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.197018783E+01
Y = 0.670577619E+00
Z = 0.250000476E+01
TOTAL APPLIED LOAD 1

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 1 )

SUMMATION FORCEX = 0.00
SUMMATION FORCEY = 4.28
SUMMATION FORCEZ = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN

MX= 10.70 MY= 0.00 MZ= 8.43

TOTAL REACTION LOAD 1

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 1 )

SUMMATION FORCEX = 0.00
SUMMATION FORCEY = 4.28
SUMMATION FORCEZ = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN

MX= 10.70 MY= 0.00 MZ= 8.43

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 1)

MAXIMUMS AT NODE
X = 1.31299E02 13
Y = 6.82084E02 13
Z = 5.89547E03 7
RX= 7.14332E04 2
RY= 2.21773E04 5
RZ= 1.28864E03 13

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )

JT EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
INT FX INT FY INT FZ INT MX INT MY INT MZ

SUPPORT=1
11 0.00 0.02 0.00 0.00 0.00 0.00
0.17 0.60 0.00 0.00 0.00 0.04 111111

12 0.00 0.01 0.00 0.00 0.00 0.00

0.21 0.48 0.01 0.00 0.00 0.13 111111

23 0.00 0.02 0.00 0.00 0.00 0.00

0.37 1.15 0.00 0.00 0.00 0.10 111111

24 0.00 0.01 0.00 0.00 0.00 0.00

0.29 0.88 0.00 0.00 0.00 0.22 111111

35 0.00 0.02 0.00 0.00 0.00 0.00

0.17 0.60 0.00 0.00 0.00 0.04 111111

36 0.00 0.01 0.00 0.00 0.00 0.00

0.21 0.48 0.01 0.00 0.00 0.13 111111

FOR LOADING 2
APPLIED JOINT EQUIVALENT LOADS
JOINT FORCEX FORCEY FORCEZ MOMX MOMY MOMZ

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 9 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 10

APPLIED JOINT EQUIVALENT LOADS

JOINT FORCEX FORCEY FORCEZ MOMX MOMY MOMZ
21.51111E08 1.38432E+00 0.00000E+004.90281E01 8.97263E09 6.04444E10
41.51111E08 1.38432E+00 0.00000E+004.90281E01 8.97263E09 6.04444E10
61.51111E08 1.38432E+00 0.00000E+004.90281E01 8.97263E09 6.04444E10
81.51111E08 1.38432E+00 0.00000E+004.90281E01 8.97263E09 6.04444E10
14 4.26155E08 2.40750E+00 0.00000E+00 4.01371E061.11801E091.70462E09
16 4.26155E08 2.40750E+00 0.00000E+00 4.01371E061.11801E091.70462E09
18 4.26155E08 2.40750E+00 0.00000E+00 4.01371E061.11801E091.70462E09
20 4.26155E08 2.40750E+00 0.00000E+00 4.01371E061.11801E091.70462E09
26 3.18309E08 1.38431E+00 0.00000E+00 4.90277E01 4.20571E091.27323E09
28 3.18309E08 1.38431E+00 0.00000E+00 4.90277E01 4.20571E091.27323E09
30 3.18309E08 1.38431E+00 0.00000E+00 4.90277E01 4.20571E091.27323E09
32 3.18309E08 1.38431E+00 0.00000E+00 4.90277E01 4.20571E091.27323E09
37 7.54708E09 1.80563E01 0.00000E+001.12852E026.43154E113.01883E10
38 7.54708E09 1.80563E01 0.00000E+001.12852E026.43154E113.01883E10
39 7.54708E09 1.80563E01 0.00000E+001.12852E026.43154E113.01883E10
40 7.54708E09 1.80563E01 0.00000E+001.12852E026.43154E113.01883E10
41 2.73806E09 1.80562E01 0.00000E+00 1.12852E023.48633E101.09522E10
42 2.73806E09 1.80562E01 0.00000E+00 1.12852E023.48633E101.09522E10
43 2.73806E09 1.80562E01 0.00000E+00 1.12852E023.48633E101.09522E10
44 2.73806E09 1.80562E01 0.00000E+00 1.12852E023.48633E101.09522E10

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 2

LOADTYPE WIND TITLE UPWARD WL

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).

(FORCES IN NONGLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.192542979E+01
Y = 0.700800002E+00
Z = 0.250000430E+01
TOTAL APPLIED LOAD 2

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 2 )

SUMMATION FORCEX = 0.00
SUMMATION FORCEY = 22.15
SUMMATION FORCEZ = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN

MX= 55.37 MY= 0.00 MZ= 42.65

TOTAL REACTION LOAD 2

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 2 )

SUMMATION FORCEX = 0.00
SUMMATION FORCEY = 22.15
SUMMATION FORCEZ = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN

MX= 55.37 MY= 0.00 MZ= 42.65

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 10 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 11

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 2)

MAXIMUMS AT NODE
X = 8.16575E02 13
Y = 4.14707E01 13
Z = 3.67103E02 7
RX= 4.44806E03 1
RY= 1.38095E03 5
RZ= 7.84731E03 13

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )

JT EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
INT FX INT FY INT FZ INT MX INT MY INT MZ

SUPPORT=1
11 0.00 0.00 0.00 0.00 0.00 0.00
0.83 2.91 0.02 0.03 0.00 0.18 111111

12 0.00 0.00 0.00 0.00 0.00 0.00

1.08 2.49 0.05 0.02 0.00 0.74 111111

23 0.00 0.00 0.00 0.00 0.00 0.00

2.07 6.35 0.00 0.00 0.00 0.52 111111

24 0.00 0.00 0.00 0.00 0.00 0.00

1.57 5.01 0.00 0.00 0.00 1.29 111111

35 0.00 0.00 0.00 0.00 0.00 0.00

0.83 2.91 0.02 0.03 0.00 0.18 111111

36 0.00 0.00 0.00 0.00 0.00 0.00

1.08 2.49 0.05 0.02 0.00 0.74 111111

FOR LOADING 3
APPLIED JOINT EQUIVALENT LOADS
JOINT FORCEX FORCEY FORCEZ MOMX MOMY MOMZ
2 3.53638E088.51003E01 0.00000E+00 3.01398E01 4.10798E091.41455E09
4 3.53638E088.51003E01 0.00000E+00 3.01398E01 4.10798E091.41455E09
6 3.53638E088.51003E01 0.00000E+00 3.01398E01 4.10798E091.41455E09
8 3.53638E088.51003E01 0.00000E+00 3.01398E01 4.10798E091.41455E09
147.81215E091.48000E+00 0.00000E+002.46484E061.30211E09 3.12486E10
167.81215E091.48000E+00 0.00000E+002.46484E061.30211E09 3.12486E10
187.81215E091.48000E+00 0.00000E+002.46484E061.30211E09 3.12486E10
207.81215E091.48000E+00 0.00000E+002.46484E061.30211E09 3.12486E10
26 4.27900E098.51000E01 0.00000E+003.01396E015.93510E091.71160E10
28 4.27900E098.51000E01 0.00000E+003.01396E015.93510E091.71160E10
30 4.27900E098.51000E01 0.00000E+003.01396E015.93510E091.71160E10
32 4.27900E098.51000E01 0.00000E+003.01396E015.93510E091.71160E10
37 5.70482E101.11000E01 0.00000E+00 6.93754E031.83554E102.28193E11
38 5.70482E101.11000E01 0.00000E+00 6.93754E031.83554E102.28193E11
39 5.70482E101.11000E01 0.00000E+00 6.93754E031.83554E102.28193E11
40 5.70482E101.11000E01 0.00000E+00 6.93754E031.83554E102.28193E11
41 1.54380E091.11000E01 0.00000E+006.93750E03 3.23157E116.17519E11
42 1.54380E091.11000E01 0.00000E+006.93750E03 3.23157E116.17519E11
43 1.54380E091.11000E01 0.00000E+006.93750E03 3.23157E116.17519E11
44 1.54380E091.11000E01 0.00000E+006.93750E03 3.23157E116.17519E11

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 3

LOADTYPE WIND TITLE DOWNWARD WL

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 11 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 12

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).

(FORCES IN NONGLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.192542980E+01
Y = 0.700800002E+00
Z = 0.250000434E+01
TOTAL APPLIED LOAD 3

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 3 )

SUMMATION FORCEX = 0.00
SUMMATION FORCEY = 13.62
SUMMATION FORCEZ = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN

MX= 34.04 MY= 0.00 MZ= 26.22

TOTAL REACTION LOAD 3

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 3 )

SUMMATION FORCEX = 0.00
SUMMATION FORCEY = 13.62
SUMMATION FORCEZ = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN

MX= 34.04 MY= 0.00 MZ= 26.22

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 3)

MAXIMUMS AT NODE
X = 5.01986E02 13
Y = 2.54940E01 13
Z = 2.25675E02 7
RX= 2.73442E03 2
RY= 8.48936E04 5
RZ= 4.82410E03 14

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )

JT EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
INT FX INT FY INT FZ INT MX INT MY INT MZ

SUPPORT=1
11 0.00 0.00 0.00 0.00 0.00 0.00
0.51 1.79 0.01 0.02 0.00 0.11 111111

12 0.00 0.00 0.00 0.00 0.00 0.00

0.66 1.53 0.03 0.01 0.00 0.46 111111

23 0.00 0.00 0.00 0.00 0.00 0.00

1.27 3.90 0.00 0.00 0.00 0.32 111111

24 0.00 0.00 0.00 0.00 0.00 0.00

0.97 3.08 0.00 0.00 0.00 0.79 111111

35 0.00 0.00 0.00 0.00 0.00 0.00

0.51 1.79 0.01 0.02 0.00 0.11 111111

36 0.00 0.00 0.00 0.00 0.00 0.00

0.66 1.53 0.03 0.01 0.00 0.46 111111

FOR LOADING 4
APPLIED JOINT EQUIVALENT LOADS
JOINT FORCEX FORCEY FORCEZ MOMX MOMY MOMZ

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 12 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 13

APPLIED JOINT EQUIVALENT LOADS

JOINT FORCEX FORCEY FORCEZ MOMX MOMY MOMZ
3 1.15261E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 9.62693E04
5 2.95400E02 7.02005E10 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
7 2.10000E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 2.62499E03
10 6.90497E02 7.02005E10 0.00000E+00 0.00000E+00 0.00000E+005.85651E04
11 1.85097E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+002.03934E03
12 1.15261E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+009.62693E04
15 1.15261E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 9.62693E04
17 2.95400E02 7.02005E10 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
19 2.10000E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 2.62499E03
22 6.90497E02 7.02005E10 0.00000E+00 0.00000E+00 0.00000E+005.85651E04
23 1.85097E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+002.03934E03
24 1.15261E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+009.62693E04
27 1.15261E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 9.62693E04
29 2.95400E02 7.02005E10 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
31 2.10000E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 2.62499E03
34 6.90497E02 7.02005E10 0.00000E+00 0.00000E+00 0.00000E+005.85651E04
35 1.85097E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+002.03934E03
36 1.15261E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+009.62693E04

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 4

LOADTYPE WIND TITLE WL IN +X DIRX

CENTER OF FORCE BASED ON X FORCES ONLY (METE).

(FORCES IN NONGLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.255109076E+01
Y = 0.409248108E+00
Z = 0.250000661E+01
TOTAL APPLIED LOAD 4

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 4 )

SUMMATION FORCEX = 0.48
SUMMATION FORCEY = 0.00
SUMMATION FORCEZ = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN

MX= 0.00 MY= 1.21 MZ= 0.20

TOTAL REACTION LOAD 4

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 4 )

SUMMATION FORCEX = 0.48
SUMMATION FORCEY = 0.00
SUMMATION FORCEZ = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN

MX= 0.00 MY= 1.21 MZ= 0.20

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 13 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 14

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 4)

MAXIMUMS AT NODE
X = 1.70156E03 34
Y = 1.71527E03 25
Z = 1.94570E17 9
RX= 4.98902E19 8
RY= 4.70950E19 40
RZ= 2.67718E05 1

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )

JT EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
INT FX INT FY INT FZ INT MX INT MY INT MZ

SUPPORT=1
FOR LOADING 5
APPLIED JOINT EQUIVALENT LOADS
JOINT FORCEX FORCEY FORCEZ MOMX MOMY MOMZ
31.15261E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+009.62693E04
52.95400E027.02005E10 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
72.10000E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+002.62499E03
106.90497E027.02005E10 0.00000E+00 0.00000E+00 0.00000E+00 5.85651E04
111.85097E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 2.03934E03
121.15261E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 9.62693E04
151.15261E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+009.62693E04
172.95400E027.02005E10 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
192.10000E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+002.62499E03
226.90497E027.02005E10 0.00000E+00 0.00000E+00 0.00000E+00 5.85651E04
231.85097E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 2.03934E03
241.15261E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 9.62693E04
271.15261E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+009.62693E04
292.95400E027.02005E10 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
312.10000E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+002.62499E03
346.90497E027.02005E10 0.00000E+00 0.00000E+00 0.00000E+00 5.85651E04
351.85097E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 2.03934E03
361.15261E02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 9.62693E04

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 5

LOADTYPE WIND TITLE WL IN X DIRX

CENTER OF FORCE BASED ON X FORCES ONLY (METE).

(FORCES IN NONGLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.255109076E+01
Y = 0.409248108E+00
Z = 0.250000661E+01
TOTAL APPLIED LOAD 5

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 5 )

SUMMATION FORCEX = 0.48
SUMMATION FORCEY = 0.00
SUMMATION FORCEZ = 0.00

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 14 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 15

SUMMATION OF MOMENTS AROUND THE ORIGIN

MX= 0.00 MY= 1.21 MZ= 0.20

TOTAL REACTION LOAD 5

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 5 )

SUMMATION FORCEX = 0.48
SUMMATION FORCEY = 0.00
SUMMATION FORCEZ = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN

MX= 0.00 MY= 1.21 MZ= 0.20

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 5)

MAXIMUMS AT NODE
X = 1.70156E03 34
Y = 1.71527E03 25
Z = 1.94570E17 9
RX= 4.98902E19 8
RY= 4.70950E19 40
RZ= 2.67718E05 1

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )

JT EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
INT FX INT FY INT FZ INT MX INT MY INT MZ

SUPPORT=1
FOR LOADING 6
APPLIED JOINT EQUIVALENT LOADS
JOINT FORCEX FORCEY FORCEZ MOMX MOMY MOMZ
1 0.00000E+00 0.00000E+00 4.80000E03 2.73617E057.51755E05 0.00000E+00
2 0.00000E+00 0.00000E+00 3.25813E02 8.89208E042.44307E03 0.00000E+00
3 0.00000E+00 0.00000E+00 9.88501E02 9.52874E055.32180E03 0.00000E+00
4 0.00000E+00 0.00000E+00 6.38506E022.59228E03 7.12229E03 0.00000E+00
5 0.00000E+00 0.00000E+00 6.30437E02 1.52792E044.19800E04 0.00000E+00
6 0.00000E+00 0.00000E+00 6.38507E02 2.00992E035.52223E03 0.00000E+00
7 0.00000E+00 0.00000E+00 1.07925E015.12708E03 3.39724E03 0.00000E+00
8 0.00000E+00 0.00000E+00 3.25813E021.18640E03 3.25954E03 0.00000E+00
9 0.00000E+00 0.00000E+00 9.59817E041.09419E06 3.00582E06 0.00000E+00
10 0.00000E+00 0.00000E+00 8.80990E02 8.68019E04 0.00000E+00 0.00000E+00
11 0.00000E+00 0.00000E+00 2.74340E02 3.02259E03 0.00000E+00 0.00000E+00
12 0.00000E+00 0.00000E+00 2.20500E02 1.84167E03 0.00000E+00 0.00000E+00
13 0.00000E+00 0.00000E+00 4.80000E03 2.73617E057.51755E05 0.00000E+00
14 0.00000E+00 0.00000E+00 3.25813E02 8.89208E042.44307E03 0.00000E+00
15 0.00000E+00 0.00000E+00 9.88501E02 9.52874E055.32180E03 0.00000E+00
16 0.00000E+00 0.00000E+00 6.38506E022.59228E03 7.12229E03 0.00000E+00
17 0.00000E+00 0.00000E+00 6.30437E02 1.52792E044.19800E04 0.00000E+00
18 0.00000E+00 0.00000E+00 6.38507E02 2.00992E035.52223E03 0.00000E+00
19 0.00000E+00 0.00000E+00 1.07925E015.12708E03 3.39724E03 0.00000E+00
20 0.00000E+00 0.00000E+00 3.25813E021.18640E03 3.25954E03 0.00000E+00
21 0.00000E+00 0.00000E+00 9.59817E041.09419E06 3.00582E06 0.00000E+00
22 0.00000E+00 0.00000E+00 8.80990E02 8.68019E04 0.00000E+00 0.00000E+00
23 0.00000E+00 0.00000E+00 2.74340E02 3.02259E03 0.00000E+00 0.00000E+00

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 15 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 16

APPLIED JOINT EQUIVALENT LOADS

JOINT FORCEX FORCEY FORCEZ MOMX MOMY MOMZ
24 0.00000E+00 0.00000E+00 2.20500E02 1.84167E03 0.00000E+00 0.00000E+00
25 0.00000E+00 0.00000E+00 4.80000E03 2.73617E057.51755E05 0.00000E+00
26 0.00000E+00 0.00000E+00 3.25813E02 8.89208E042.44307E03 0.00000E+00
27 0.00000E+00 0.00000E+00 9.88501E02 9.52874E055.32180E03 0.00000E+00
28 0.00000E+00 0.00000E+00 6.38506E022.59228E03 7.12229E03 0.00000E+00
29 0.00000E+00 0.00000E+00 6.30437E02 1.52792E044.19800E04 0.00000E+00
30 0.00000E+00 0.00000E+00 6.38507E02 2.00992E035.52223E03 0.00000E+00
31 0.00000E+00 0.00000E+00 1.07925E015.12708E03 3.39724E03 0.00000E+00
32 0.00000E+00 0.00000E+00 3.25813E021.18640E03 3.25954E03 0.00000E+00
33 0.00000E+00 0.00000E+00 9.59817E041.09419E06 3.00582E06 0.00000E+00
34 0.00000E+00 0.00000E+00 8.80990E02 8.68019E04 0.00000E+00 0.00000E+00
35 0.00000E+00 0.00000E+00 2.74340E02 3.02259E03 0.00000E+00 0.00000E+00
36 0.00000E+00 0.00000E+00 2.20500E02 1.84167E03 0.00000E+00 0.00000E+00

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 6

LOADTYPE WIND TITLE WL IN +Z DIRX

CENTER OF FORCE BASED ON Z FORCES ONLY (METE).

(FORCES IN NONGLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.209937865E+01
Y = 0.572972322E+00
Z = 0.250000661E+01
TOTAL APPLIED LOAD 6

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 6 )

SUMMATION FORCEX = 0.00
SUMMATION FORCEY = 0.00
SUMMATION FORCEZ = 1.82

SUMMATION OF MOMENTS AROUND THE ORIGIN

MX= 1.04 MY= 3.82 MZ= 0.00

TOTAL REACTION LOAD 6

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 6 )

SUMMATION FORCEX = 0.00
SUMMATION FORCEY = 0.00
SUMMATION FORCEZ = 1.82

SUMMATION OF MOMENTS AROUND THE ORIGIN

MX= 1.04 MY= 3.82 MZ= 0.00

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 6)

MAXIMUMS AT NODE
X = 4.98592E02 38
Y = 1.89734E02 38
Z = 3.83809E01 9
RX= 3.71638E03 19
RY= 1.98499E03 15
RZ= 4.40528E05 41

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 16 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 17

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )

JT EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
INT FX INT FY INT FZ INT MX INT MY INT MZ

SUPPORT=1
11 0.00 0.00 0.03 0.00 0.00 0.00
0.02 0.01 0.25 0.28 0.00 0.01 111111

12 0.00 0.00 0.02 0.00 0.00 0.00

0.10 0.05 0.32 0.16 0.00 0.04 111111

23 0.00 0.00 0.03 0.00 0.00 0.00

0.00 0.00 0.25 0.28 0.00 0.00 111111

24 0.00 0.00 0.02 0.00 0.00 0.00

0.00 0.00 0.30 0.15 0.00 0.00 111111

35 0.00 0.00 0.03 0.00 0.00 0.00

0.02 0.01 0.25 0.28 0.00 0.01 111111

36 0.00 0.00 0.02 0.00 0.00 0.00

0.10 0.05 0.32 0.16 0.00 0.04 111111

FOR LOADING 7
APPLIED JOINT EQUIVALENT LOADS
JOINT FORCEX FORCEY FORCEZ MOMX MOMY MOMZ
1 0.00000E+00 0.00000E+004.80000E032.73617E05 7.51755E05 0.00000E+00
2 0.00000E+00 0.00000E+003.25813E028.89208E04 2.44307E03 0.00000E+00
3 0.00000E+00 0.00000E+009.88501E029.52874E05 5.32180E03 0.00000E+00
4 0.00000E+00 0.00000E+006.38506E02 2.59228E037.12229E03 0.00000E+00
5 0.00000E+00 0.00000E+006.30437E021.52792E04 4.19800E04 0.00000E+00
6 0.00000E+00 0.00000E+006.38507E022.00992E03 5.52223E03 0.00000E+00
7 0.00000E+00 0.00000E+001.07925E01 5.12708E033.39724E03 0.00000E+00
8 0.00000E+00 0.00000E+003.25813E02 1.18640E033.25954E03 0.00000E+00
9 0.00000E+00 0.00000E+009.59817E04 1.09419E063.00582E06 0.00000E+00
10 0.00000E+00 0.00000E+008.80990E028.68019E04 0.00000E+00 0.00000E+00
11 0.00000E+00 0.00000E+002.74340E023.02259E03 0.00000E+00 0.00000E+00
12 0.00000E+00 0.00000E+002.20500E021.84167E03 0.00000E+00 0.00000E+00
13 0.00000E+00 0.00000E+004.80000E032.73617E05 7.51755E05 0.00000E+00
14 0.00000E+00 0.00000E+003.25813E028.89208E04 2.44307E03 0.00000E+00
15 0.00000E+00 0.00000E+009.88501E029.52874E05 5.32180E03 0.00000E+00
16 0.00000E+00 0.00000E+006.38506E02 2.59228E037.12229E03 0.00000E+00
17 0.00000E+00 0.00000E+006.30437E021.52792E04 4.19800E04 0.00000E+00
18 0.00000E+00 0.00000E+006.38507E022.00992E03 5.52223E03 0.00000E+00
19 0.00000E+00 0.00000E+001.07925E01 5.12708E033.39724E03 0.00000E+00
20 0.00000E+00 0.00000E+003.25813E02 1.18640E033.25954E03 0.00000E+00
21 0.00000E+00 0.00000E+009.59817E04 1.09419E063.00582E06 0.00000E+00
22 0.00000E+00 0.00000E+008.80990E028.68019E04 0.00000E+00 0.00000E+00
23 0.00000E+00 0.00000E+002.74340E023.02259E03 0.00000E+00 0.00000E+00
24 0.00000E+00 0.00000E+002.20500E021.84167E03 0.00000E+00 0.00000E+00
25 0.00000E+00 0.00000E+004.80000E032.73617E05 7.51755E05 0.00000E+00
26 0.00000E+00 0.00000E+003.25813E028.89208E04 2.44307E03 0.00000E+00
27 0.00000E+00 0.00000E+009.88501E029.52874E05 5.32180E03 0.00000E+00
28 0.00000E+00 0.00000E+006.38506E02 2.59228E037.12229E03 0.00000E+00
29 0.00000E+00 0.00000E+006.30437E021.52792E04 4.19800E04 0.00000E+00
30 0.00000E+00 0.00000E+006.38507E022.00992E03 5.52223E03 0.00000E+00
31 0.00000E+00 0.00000E+001.07925E01 5.12708E033.39724E03 0.00000E+00
32 0.00000E+00 0.00000E+003.25813E02 1.18640E033.25954E03 0.00000E+00
33 0.00000E+00 0.00000E+009.59817E04 1.09419E063.00582E06 0.00000E+00

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 17 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 18

APPLIED JOINT EQUIVALENT LOADS

JOINT FORCEX FORCEY FORCEZ MOMX MOMY MOMZ
34 0.00000E+00 0.00000E+008.80990E028.68019E04 0.00000E+00 0.00000E+00
35 0.00000E+00 0.00000E+002.74340E023.02259E03 0.00000E+00 0.00000E+00
36 0.00000E+00 0.00000E+002.20500E021.84167E03 0.00000E+00 0.00000E+00

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 7

LOADTYPE WIND TITLE WL IN Z DIRX

CENTER OF FORCE BASED ON Z FORCES ONLY (METE).

(FORCES IN NONGLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.209937865E+01
Y = 0.572972322E+00
Z = 0.250000661E+01
TOTAL APPLIED LOAD 7

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 7 )

SUMMATION FORCEX = 0.00
SUMMATION FORCEY = 0.00
SUMMATION FORCEZ = 1.82

SUMMATION OF MOMENTS AROUND THE ORIGIN

MX= 1.04 MY= 3.82 MZ= 0.00

TOTAL REACTION LOAD 7

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 7 )

SUMMATION FORCEX = 0.00
SUMMATION FORCEY = 0.00
SUMMATION FORCEZ = 1.82

SUMMATION OF MOMENTS AROUND THE ORIGIN

MX= 1.04 MY= 3.82 MZ= 0.00

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 7)

MAXIMUMS AT NODE
X = 4.98592E02 38
Y = 1.89734E02 38
Z = 3.83809E01 9
RX= 3.71638E03 19
RY= 1.98499E03 15
RZ= 4.40528E05 41

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )

JT EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
INT FX INT FY INT FZ INT MX INT MY INT MZ

SUPPORT=1
11 0.00 0.00 0.03 0.00 0.00 0.00
0.02 0.01 0.25 0.28 0.00 0.01 111111

12 0.00 0.00 0.02 0.00 0.00 0.00

0.10 0.05 0.32 0.16 0.00 0.04 111111

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 18 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 19

23 0.00 0.00 0.03 0.00 0.00 0.00

0.00 0.00 0.25 0.28 0.00 0.00 111111

24 0.00 0.00 0.02 0.00 0.00 0.00

0.00 0.00 0.30 0.15 0.00 0.00 111111

35 0.00 0.00 0.03 0.00 0.00 0.00

0.02 0.01 0.25 0.28 0.00 0.01 111111

36 0.00 0.00 0.02 0.00 0.00 0.00

0.10 0.05 0.32 0.16 0.00 0.04 111111

LOAD COMBINATION NO. 8

DL+ UPWARD WL

LOADING 1. 2.
FACTOR 1.00 1.00

LOAD COMBINATION NO. 9

DL+ UPWARD WL+ WL IN +X DIRX

LOADING 1. 2. 4.
FACTOR 1.00 1.00 1.00

LOAD COMBINATION NO. 10

DL+ UPWARD WL+ WL IN X DIRX

LOADING 1. 2. 5.
FACTOR 1.00 1.00 1.00

LOAD COMBINATION NO. 11

DL+ UPWARD WL+ WL IN +Z DIRX

LOADING 1. 2. 6.
FACTOR 1.00 1.00 1.00

LOAD COMBINATION NO. 12

DL+ UPWARD WL+ WL IN Z DIRX

LOADING 1. 2. 7.
FACTOR 1.00 1.00 1.00

LOAD COMBINATION NO. 13

DL+DOWNWARD WL

LOADING 1. 3.
FACTOR 1.00 1.00

LOAD COMBINATION NO. 14

DL+ DOWNWARD WL+ WL IN +X DIRX

LOADING 1. 3. 4.
FACTOR 1.00 1.00 1.00

LOAD COMBINATION NO. 15

DL+ DOWNWARD WL+ WL INX DIRX

LOADING 1. 3. 5.
FACTOR 1.00 1.00 1.00

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 19 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 20

LOAD COMBINATION NO. 16

DL+ DOWNWARD WL+ WL IN +Z DIRX

LOADING 1. 3. 6.
FACTOR 1.00 1.00 1.00

LOAD COMBINATION NO. 17

DL+ DOWNWARD WL+ WL IN Z DIRX

LOADING 1. 3. 7.
FACTOR 1.00 1.00 1.00

END OF DATA FROM INTERNAL STORAGE

115. PARAMETER 1
116. CODE IS801
117. FYLD 350000 ALL
118. CHECK CODE ALL
STEEL DESIGN
STAAD.Pro CODE CHECKING ( IS:801 ) v3.0
***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 1 SECTION: 80CS50X2 LEN: 0.100 LOC: 0.100 |
| STATUS: PASS RATIO: 6.1E04 REF: 6.7.1(T) LC: 12 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 2 SECTION: 80CS50X2 LEN: 0.579 LOC: 0.579 |
| STATUS: PASS RATIO: 0.404 REF: 6.7.2(a)2 LC: 11 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 20 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 21

||
| MEMBER: 3 SECTION: 80CS50X2 LEN: 1.021 LOC: 0.000 |
| STATUS: PASS RATIO: 0.290 REF: 6.7.1(T) LC: 11 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 4 SECTION: 80CS50X2 LEN: 0.309 LOC: 0.000 |
| STATUS: PASS RATIO: 0.162 REF: 6.7.1(T) LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 5 SECTION: 80CS50X2 LEN: 0.389 LOC: 0.389 |
| STATUS: PASS RATIO: 0.197 REF: 6.7.2(a)2 LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 6 SECTION: 80CS50X2 LEN: 0.941 LOC: 0.000 |
| STATUS: PASS RATIO: 0.221 REF: 6.7.2(a)2 LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 7 SECTION: 80CS50X2 LEN: 0.659 LOC: 0.000 |
| STATUS: PASS RATIO: 0.427 REF: 6.7.1(T) LC: 2 |
||

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 21 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 22

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 8 SECTION: 80CS50X2 LEN: 0.020 LOC: 0.000 |
| STATUS: PASS RATIO: 7.0E05 REF: 6.4.3 LC: 11 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 9 SECTION: 100CS50X3.15 LEN: 0.750 LOC: 0.750 |
| STATUS: PASS RATIO: 0.157 REF: 6.7.2(a)2 LC: 16 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 10 SECTION: 100CS50X3.15 LEN: 0.661 LOC: 0.661 |
| STATUS: PASS RATIO: 0.228 REF: 6.7.2(a)2 LC: 16 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 11 SECTION: 100CS50X3.15 LEN: 0.501 LOC: 0.501 |
| STATUS: PASS RATIO: 0.265 REF: 6.7.1(T) LC: 12 |
||

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 22 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 23

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 12 SECTION: 40LU40X3.15 LEN: 1.284 LOC: 0.000 |
| STATUS: PASS RATIO: 0.207 REF: 6.6.1.1 LC: 14 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 13 SECTION: 80CS50X2 LEN: 0.100 LOC: 0.100 |
| STATUS: PASS RATIO: 6.1E04 REF: 6.7.1(T) LC: 12 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 14 SECTION: 80CS50X2 LEN: 0.579 LOC: 0.579 |
| STATUS: PASS RATIO: 0.754 REF: 6.7.2(a)2 LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 15 SECTION: 80CS50X2 LEN: 1.021 LOC: 0.000 |
| STATUS: PASS RATIO: 0.529 REF: 6.7.1(T) LC: 2 |
||

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 23 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 24

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 16 SECTION: 80CS50X2 LEN: 0.309 LOC: 0.000 |
| STATUS: PASS RATIO: 0.232 REF: 6.7.1(T) LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 17 SECTION: 80CS50X2 LEN: 0.389 LOC: 0.389 |
| STATUS: PASS RATIO: 0.332 REF: 6.7.2(a)2 LC: 12 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 18 SECTION: 80CS50X2 LEN: 0.941 LOC: 0.941 |
| STATUS: PASS RATIO: 0.387 REF: 6.7.2(a)2 LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 19 SECTION: 80CS50X2 LEN: 0.659 LOC: 0.000 |
| STATUS: PASS RATIO: 0.854 REF: 6.7.1(T) LC: 2 |
||

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 24 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 25

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 20 SECTION: 80CS50X2 LEN: 0.020 LOC: 0.000 |
| STATUS: PASS RATIO: 7.0E05 REF: 6.4.3 LC: 11 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 21 SECTION: 100CS50X3.15 LEN: 0.750 LOC: 0.000 |
| STATUS: PASS RATIO: 0.288 REF: 6.7.1(T) LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 22 SECTION: 100CS50X3.15 LEN: 0.661 LOC: 0.661 |
| STATUS: PASS RATIO: 0.323 REF: 6.7.2(a)2 LC: 16 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 23 SECTION: 100CS50X3.15 LEN: 0.501 LOC: 0.501 |
| STATUS: PASS RATIO: 0.380 REF: 6.7.1(T) LC: 12 |
||

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 25 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 26

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 24 SECTION: 40LU40X3.15 LEN: 1.284 LOC: 0.000 |
| STATUS: PASS RATIO: 0.467 REF: 6.6.1.1 LC: 14 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 25 SECTION: 80CS50X2 LEN: 0.100 LOC: 0.100 |
| STATUS: PASS RATIO: 6.1E04 REF: 6.7.1(T) LC: 12 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 26 SECTION: 80CS50X2 LEN: 0.579 LOC: 0.579 |
| STATUS: PASS RATIO: 0.372 REF: 6.7.2(a)2 LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 27 SECTION: 80CS50X2 LEN: 1.021 LOC: 0.000 |
| STATUS: PASS RATIO: 0.334 REF: 6.7.1(T) LC: 12 |
||

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 26 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 27

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 28 SECTION: 80CS50X2 LEN: 0.309 LOC: 0.000 |
| STATUS: PASS RATIO: 0.198 REF: 6.7.1(T) LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 29 SECTION: 80CS50X2 LEN: 0.389 LOC: 0.389 |
| STATUS: PASS RATIO: 0.238 REF: 6.7.2(a)2 LC: 12 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 30 SECTION: 80CS50X2 LEN: 0.941 LOC: 0.941 |
| STATUS: PASS RATIO: 0.207 REF: 6.7.2(a)2 LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 31 SECTION: 80CS50X2 LEN: 0.659 LOC: 0.000 |
| STATUS: PASS RATIO: 0.415 REF: 6.7.1(T) LC: 2 |
||

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 27 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 28

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 32 SECTION: 80CS50X2 LEN: 0.020 LOC: 0.000 |
| STATUS: PASS RATIO: 7.0E05 REF: 6.4.3 LC: 11 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 33 SECTION: 100CS50X3.15 LEN: 0.750 LOC: 0.750 |
| STATUS: PASS RATIO: 0.170 REF: 6.7.2(a)2 LC: 16 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 34 SECTION: 100CS50X3.15 LEN: 0.661 LOC: 0.661 |
| STATUS: PASS RATIO: 0.248 REF: 6.7.2(a)2 LC: 16 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 35 SECTION: 100CS50X3.15 LEN: 0.501 LOC: 0.501 |
| STATUS: PASS RATIO: 0.257 REF: 6.7.1(T) LC: 12 |
||

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 28 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 29

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 36 SECTION: 40LU40X3.15 LEN: 1.284 LOC: 0.000 |
| STATUS: PASS RATIO: 0.207 REF: 6.6.1.1 LC: 14 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 37 SECTION: 80CS50X2 LEN: 0.375 LOC: 0.375 |
| STATUS: PASS RATIO: 0.056 REF: 6.7.1(T) LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 38 SECTION: 80CS50X2 LEN: 2.500 LOC: 2.500 |
| STATUS: PASS RATIO: 0.546 REF: 6.3 LTB LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 39 SECTION: 80CS50X2 LEN: 2.500 LOC: 0.000 |
| STATUS: PASS RATIO: 0.546 REF: 6.3 LTB LC: 2 |
||

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 29 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 30

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 40 SECTION: 80CS50X2 LEN: 0.375 LOC: 0.000 |
| STATUS: PASS RATIO: 0.056 REF: 6.7.1(T) LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 41 SECTION: 80CS50X2 LEN: 0.375 LOC: 0.375 |
| STATUS: PASS RATIO: 0.056 REF: 6.7.1(T) LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 42 SECTION: 80CS50X2 LEN: 2.500 LOC: 2.500 |
| STATUS: PASS RATIO: 0.580 REF: 6.3 LTB LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 43 SECTION: 80CS50X2 LEN: 2.500 LOC: 0.000 |
| STATUS: PASS RATIO: 0.580 REF: 6.3 LTB LC: 2 |
||

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 30 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 31

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 44 SECTION: 80CS50X2 LEN: 0.375 LOC: 0.000 |
| STATUS: PASS RATIO: 0.056 REF: 6.7.1(T) LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 45 SECTION: 80CS50X2 LEN: 0.375 LOC: 0.375 |
| STATUS: PASS RATIO: 0.056 REF: 6.7.1(T) LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 46 SECTION: 80CS50X2 LEN: 2.500 LOC: 2.500 |
| STATUS: PASS RATIO: 0.570 REF: 6.3 LTB LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 47 SECTION: 80CS50X2 LEN: 2.500 LOC: 0.000 |
| STATUS: PASS RATIO: 0.570 REF: 6.3 LTB LC: 2 |
||

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 31 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 32

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 48 SECTION: 80CS50X2 LEN: 0.375 LOC: 0.000 |
| STATUS: PASS RATIO: 0.056 REF: 6.7.1(T) LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 49 SECTION: 80CS50X2 LEN: 0.375 LOC: 0.375 |
| STATUS: PASS RATIO: 0.056 REF: 6.7.1(T) LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 50 SECTION: 80CS50X2 LEN: 2.500 LOC: 2.500 |
| STATUS: PASS RATIO: 0.540 REF: 6.3 LTB LC: 2 |
||

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 51 SECTION: 80CS50X2 LEN: 2.500 LOC: 0.000 |
| STATUS: PASS RATIO: 0.540 REF: 6.3 LTB LC: 2 |
||

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 32 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 33

STAAD.Pro CODE CHECKING ( IS:801 ) v3.0

***********************
ALL UNITS ARE IN METE KN (U.N.O.)
||
| MEMBER: 52 SECTION: 80CS50X2 LEN: 0.375 LOC: 0.000 |
| STATUS: PASS RATIO: 0.056 REF: 6.7.1(T) LC: 2 |
||

119. FINISH

* END OF THE STAAD.Pro RUN *

DATE= JAN 31,2024 TIME= 21:35:30

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 33 of 34

30 January 2024 12:10

DXF IMPORT OF 2X5_R0 PAGE NO. 34

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://www.bentley.com/en/support/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help>Technical Support *
* *
* Copyright (c) Bentley Systems, Inc. *
* http://www.bentley.com *
************************************************************

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 34 of 34

Ballast Structure
No ratings yet
Ballast Structure
34 pages
004 - Purlin Design
No ratings yet
004 - Purlin Design
23 pages
Purlin Calculator
No ratings yet
Purlin Calculator
16 pages
Grit and Sag Rod Design Calculations
No ratings yet
Grit and Sag Rod Design Calculations
3 pages
Mathcad - C06-C7
100% (1)
Mathcad - C06-C7
9 pages
Fence Analysis
No ratings yet
Fence Analysis
27 pages
Monorail Beam Flange Stress Check
100% (1)
Monorail Beam Flange Stress Check
7 pages
Design Calculation of CVT Equipment Support Structure - R2 29.01.2025
100% (1)
Design Calculation of CVT Equipment Support Structure - R2 29.01.2025
74 pages
Modal Analysis and Rayleigh Analysis Staad Example
100% (1)
Modal Analysis and Rayleigh Analysis Staad Example
2 pages
Staad Pro British Example
No ratings yet
Staad Pro British Example
104 pages
3pile Pilecap
100% (1)
3pile Pilecap
4 pages
Solar Structure Design Report
100% (1)
Solar Structure Design Report
70 pages
Transformer Foundation Design for IBPS 13
No ratings yet
Transformer Foundation Design for IBPS 13
49 pages
Wind - PZ Calculation
No ratings yet
Wind - PZ Calculation
4 pages
Design of 160 MVA TF - FDN
No ratings yet
Design of 160 MVA TF - FDN
24 pages
9m & 12m Pole Design Calculations
No ratings yet
9m & 12m Pole Design Calculations
2 pages
Design Report - UPGRADATION MODERNIZATION OF INFRASTRUCTURE AT BIKANER
No ratings yet
Design Report - UPGRADATION MODERNIZATION OF INFRASTRUCTURE AT BIKANER
40 pages
Snow Load As Weight Per MM Calculation 330
No ratings yet
Snow Load As Weight Per MM Calculation 330
1 page
Crane Runway Design Software
No ratings yet
Crane Runway Design Software
15 pages
Pole FDN
No ratings yet
Pole FDN
24 pages
Shed Structure Output
No ratings yet
Shed Structure Output
9 pages
Mspgcl-Mskvy 2.0-12-Ghodegaon-Me-Dwg-2 - Mms - Design Report CFD and Staad - r00
No ratings yet
Mspgcl-Mskvy 2.0-12-Ghodegaon-Me-Dwg-2 - Mms - Design Report CFD and Staad - r00
281 pages
25MVA Transformer Foundation Design
No ratings yet
25MVA Transformer Foundation Design
5 pages
Steel Structure Design Report
No ratings yet
Steel Structure Design Report
40 pages
Wind Load Calculations for Multi-Story Buildings
No ratings yet
Wind Load Calculations for Multi-Story Buildings
23 pages
1.1 General Details & Load Calculations - Substation Building (Pess)
No ratings yet
1.1 General Details & Load Calculations - Substation Building (Pess)
2 pages
PEB-Preliminary Structural report-MYAUNG TAKAR FACTORY-B01-REV01-14.05.2024
No ratings yet
PEB-Preliminary Structural report-MYAUNG TAKAR FACTORY-B01-REV01-14.05.2024
51 pages
Base Plate and Anchor Bolt For F Block Peragola-R2
No ratings yet
Base Plate and Anchor Bolt For F Block Peragola-R2
3 pages
Slab Design Calculations for Control Room
No ratings yet
Slab Design Calculations for Control Room
5 pages
WH04.Wind Loads
No ratings yet
WH04.Wind Loads
6 pages
Design Basis for Steel Ladder System
100% (1)
Design Basis for Steel Ladder System
35 pages
Suspension Cable Tension Vs Tower Height Spreadsheet
100% (1)
Suspension Cable Tension Vs Tower Height Spreadsheet
10 pages
AISC Slenderness Parameters in STAAD Pro
No ratings yet
AISC Slenderness Parameters in STAAD Pro
9 pages
Structure Design Report 5H8@1000 - Purlin
No ratings yet
Structure Design Report 5H8@1000 - Purlin
64 pages
Column Design-With Biaxial Moment
No ratings yet
Column Design-With Biaxial Moment
12 pages
All Weather Climatic Chamber Design
No ratings yet
All Weather Climatic Chamber Design
13 pages
220kV Isolator Structural Specs
No ratings yet
220kV Isolator Structural Specs
15 pages
LY and LZ Explained
No ratings yet
LY and LZ Explained
31 pages
Roof Snow Load Calculation Guide
No ratings yet
Roof Snow Load Calculation Guide
5 pages
Wind Load Calculation For BLDG & Truss
No ratings yet
Wind Load Calculation For BLDG & Truss
11 pages
Staad RXN To Mat-3d Input
No ratings yet
Staad RXN To Mat-3d Input
21 pages
Footing Sliding Pressure21
No ratings yet
Footing Sliding Pressure21
452 pages
Pinned Base Plate Design Calculations-Eurocode
No ratings yet
Pinned Base Plate Design Calculations-Eurocode
2 pages
Seismic Load Analysis for Storage Tank
No ratings yet
Seismic Load Analysis for Storage Tank
5 pages
Stair Balustrade - Staircase Rev.7
No ratings yet
Stair Balustrade - Staircase Rev.7
31 pages
4PB Pilecap Design
No ratings yet
4PB Pilecap Design
2 pages
STAAD Pro Building Analysis with Raft Foundations
No ratings yet
STAAD Pro Building Analysis with Raft Foundations
4 pages
Base Plate and Anchor Bolt Design
No ratings yet
Base Plate and Anchor Bolt Design
4 pages
STAAD Generator
No ratings yet
STAAD Generator
5 pages
Concrete Base Plate and Footing Design
No ratings yet
Concrete Base Plate and Footing Design
7 pages
Wind Pressure Calculation for Circular Room
100% (1)
Wind Pressure Calculation for Circular Room
8 pages
AISC ASD Slenderness Parameters Guide
No ratings yet
AISC ASD Slenderness Parameters Guide
9 pages
Circular Footing Design Based On ACI 318-19: Input Data & Design Summary
100% (1)
Circular Footing Design Based On ACI 318-19: Input Data & Design Summary
4 pages
Fire Wall Footing and Beam Design Analysis
100% (1)
Fire Wall Footing and Beam Design Analysis
4 pages
Purlin Fixing Bolt Design
No ratings yet
Purlin Fixing Bolt Design
4 pages
Wind Load Calculations As Per IS:875 (III) - 1987
100% (1)
Wind Load Calculations As Per IS:875 (III) - 1987
13 pages
STG Column Formwork Design Guide
No ratings yet
STG Column Formwork Design Guide
18 pages
Wind Load Calculation for Steel Structure
No ratings yet
Wind Load Calculation for Steel Structure
35 pages
Staad Space (Aw)
No ratings yet
Staad Space (Aw)
5 pages
Welding Book
No ratings yet
Welding Book
117 pages
Assessment of The Durability of Concrete From Its Permeation Properties: A Review
100% (1)
Assessment of The Durability of Concrete From Its Permeation Properties: A Review
11 pages
Purchase Spec. For Tubes-Nonferrous (SB111 H55 C70600)
No ratings yet
Purchase Spec. For Tubes-Nonferrous (SB111 H55 C70600)
5 pages
Introduction To Building Climatology - Chapter 6 - Ventilation OCR
No ratings yet
Introduction To Building Climatology - Chapter 6 - Ventilation OCR
18 pages
341 Piled Foundation Design As Reflected in Codes and Standards
No ratings yet
341 Piled Foundation Design As Reflected in Codes and Standards
18 pages
Advanced Strength of Materials Overview
No ratings yet
Advanced Strength of Materials Overview
46 pages
SB330
No ratings yet
SB330
8 pages
Experimental Investigation On Shear Behaviour of Riveted Connections in Steel Structures
No ratings yet
Experimental Investigation On Shear Behaviour of Riveted Connections in Steel Structures
16 pages
Thermodynamics Basics and Definitions
No ratings yet
Thermodynamics Basics and Definitions
6 pages
Maxwell On The History of The Kinetic Theory of Gases
No ratings yet
Maxwell On The History of The Kinetic Theory of Gases
12 pages
Guidelines For Abandonment Plug
No ratings yet
Guidelines For Abandonment Plug
2 pages
API 650 Pipe Column Design
No ratings yet
API 650 Pipe Column Design
4 pages
Thermal Expansion Explained
No ratings yet
Thermal Expansion Explained
15 pages
HPHT Drilling Fluid & Cementing Guide
100% (4)
HPHT Drilling Fluid & Cementing Guide
233 pages
Engineering Thermodynamics
No ratings yet
Engineering Thermodynamics
6 pages
UF Online Structural Materials Program
No ratings yet
UF Online Structural Materials Program
5 pages
Axial Piston Variable Pump HRA11VO130DRS/10R-NSD12N00: Data Sheet
No ratings yet
Axial Piston Variable Pump HRA11VO130DRS/10R-NSD12N00: Data Sheet
12 pages
Deflection of Trusses
No ratings yet
Deflection of Trusses
9 pages
Chap 08 Soln PDF
No ratings yet
Chap 08 Soln PDF
26 pages
Thermodynamics Enthalpy and Hess Law
No ratings yet
Thermodynamics Enthalpy and Hess Law
52 pages
Hydraulic Bend Flow Optimization
No ratings yet
Hydraulic Bend Flow Optimization
10 pages
Textbook Errors Chpts 1 8 PDF
No ratings yet
Textbook Errors Chpts 1 8 PDF
4 pages
Types of Pump Impellers Explained
No ratings yet
Types of Pump Impellers Explained
9 pages
Engineering Thermodynamics Problems
No ratings yet
Engineering Thermodynamics Problems
8 pages
Moment Distribution in Plane Frames
No ratings yet
Moment Distribution in Plane Frames
22 pages
Ret Wall Shuttering Design
No ratings yet
Ret Wall Shuttering Design
4 pages
Civil Model Papers
No ratings yet
Civil Model Papers
24 pages
Mechanical Properties of Solids - Question Bank
No ratings yet
Mechanical Properties of Solids - Question Bank
17 pages
Gas Laws
No ratings yet
Gas Laws
22 pages
Pages From 112006967-PRV-Sizing-for-Exchanger-Tube-Rupture
0% (1)
Pages From 112006967-PRV-Sizing-for-Exchanger-Tube-Rupture
1 page
Fluid Mechanics and Pipe Flow
100% (2)
Fluid Mechanics and Pipe Flow
483 pages

2x5 - Design Report

Uploaded by

2x5 - Design Report

Uploaded by

Wind Load Calculation

Module Dimenstion :- 2.278 x 1.134 x 35

Wind Speed Vb :- 150 kmph

Design Wind Speed Vz :- Vb x K1 x K2 x K3 x K4

Design Wind Speed Vz :- 34.70 m/s

Wind Pressure Pz :- 0.6 x Vz X Vz

Design Wind Pressure Pd :- Kd x Ka x Kc x Pz

Design Wind Pressure Pd :- 0.650 kN/sqm

Check Design Wind Pressure Pd :- 0.7 x PZ

Taken Dsesign Wind Presure Pz :- 0.650 kN/sqm

Presure Coefficient For 20 Degree mono Slope

Upward Wind Pressure :- 0.845 kN/sqm

Upward Load on Each Purlin :- 0.963 kN/m

Load In +X Direction Load In -X Direction

Load In +Z Direction Load In -Z Direction

D:\2024-25\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.STD Page 3 of 0

1. STAAD SPACE DXF IMPORT OF 2X5_R0

D:\2024­25\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 1 of 34

DXF IMPORT OF 2X5_R0 ‐‐ PAGE NO. 2

39. DENSITY 7.68191E‐05

D:\2024­25\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 2 of 34

DXF IMPORT OF 2X5_R0 ‐‐ PAGE NO. 3

95. 1 1.0 2 1.0

NUMBER OF JOINTS 44 NUMBER OF MEMBERS 52

Using 64‐bit analysis engine.

SOLVER USED IS THE IN‐CORE ADVANCED MATH SOLVER

TOTAL PRIMARY LOAD CASES = 7, TOTAL DEGREES OF FREEDOM = 228

D:\2024­25\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 3 of 34

DXF IMPORT OF 2X5_R0 ‐‐ PAGE NO. 4

LOADING 1 LOADTYPE DEAD TITLE DEAD LOAD

ACTUAL WEIGHT OF THE STRUCTURE = 1.403 KN

MEMBER LOAD ‐ UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

37 ‐0.1250 GY 0.00 0.38

LOADING 2 LOADTYPE WIND TITLE UPWARD WL

MEMBER LOAD ‐ UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

37 0.9630 GY 0.00 0.38

D:\2024­25\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 4 of 34

DXF IMPORT OF 2X5_R0 ­­ PAGE NO. 5

LOADING 3 LOADTYPE WIND TITLE DOWNWARD WL

MEMBER LOAD ­ UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

37 ­0.5920 GY 0.00 0.38

LOADING 4 LOADTYPE WIND TITLE WL IN +X DIRX

MEMBER LOAD ­ UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

11 0.0460 GX 0.00 0.50

LOADING 5 LOADTYPE WIND TITLE WL IN ­X DIRX

D:\2024­25\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 5 of 34

DXF IMPORT OF 2X5_R0 ­­ PAGE NO. 6

MEMBER LOAD ­ UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

11 ­0.0460 GX 0.00 0.50

LOADING 6 LOADTYPE WIND TITLE WL IN +Z DIRX

MEMBER LOAD ­ UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

11 0.0880 GZ 0.00 0.50

D:\2024­25\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 6 of 34

DXF IMPORT OF 2X5_R0 ­­ PAGE NO. 7

28 0.0960 GZ 0.00 0.31

LOADING 7 LOADTYPE WIND TITLE WL IN ­Z DIRX

MEMBER LOAD ­ UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

11 ­0.0880 GZ 0.00 0.50

D:\2024­25\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 7 of 34

DXF IMPORT OF 2X5_R0 ­­ PAGE NO. 8

APPLIED JOINT EQUIVALENT LOADS

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 1

D:\2024­25\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 8 of 34

DXF IMPORT OF 2X5_R0 ­­ PAGE NO. 9

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 1 )

SUMMATION OF MOMENTS AROUND THE ORIGIN­

TOTAL REACTION LOAD 1

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 1 )

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 1 of 34

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 2 of 34

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 3 of 34

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 4 of 34

DXF IMPORT OF 2X5_R0 PAGE NO. 5

MEMBER LOAD UNIT KN METE

37 0.5920 GY 0.00 0.38

MEMBER LOAD UNIT KN METE

LOADING 5 LOADTYPE WIND TITLE WL IN X DIRX

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 5 of 34

DXF IMPORT OF 2X5_R0 PAGE NO. 6

MEMBER LOAD UNIT KN METE

11 0.0460 GX 0.00 0.50

MEMBER LOAD UNIT KN METE

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 6 of 34

DXF IMPORT OF 2X5_R0 PAGE NO. 7

LOADING 7 LOADTYPE WIND TITLE WL IN Z DIRX

MEMBER LOAD UNIT KN METE

11 0.0880 GZ 0.00 0.50

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 7 of 34

DXF IMPORT OF 2X5_R0 PAGE NO. 8

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 8 of 34

DXF IMPORT OF 2X5_R0 PAGE NO. 9

SUMMATION OF MOMENTS AROUND THE ORIGIN

SUMMATION OF MOMENTS AROUND THE ORIGIN

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )

12 0.00 0.01 0.00 0.00 0.00 0.00

23 0.00 0.02 0.00 0.00 0.00 0.00

24 0.00 0.01 0.00 0.00 0.00 0.00

35 0.00 0.02 0.00 0.00 0.00 0.00

36 0.00 0.01 0.00 0.00 0.00 0.00

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 9 of 34

DXF IMPORT OF 2X5_R0 PAGE NO. 10

SUMMATION OF MOMENTS AROUND THE ORIGIN

SUMMATION OF MOMENTS AROUND THE ORIGIN

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 10 of 34

DXF IMPORT OF 2X5_R0 PAGE NO. 11

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 11 of 34

DXF IMPORT OF 2X5_R0 PAGE NO. 12

SUMMATION OF MOMENTS AROUND THE ORIGIN

SUMMATION OF MOMENTS AROUND THE ORIGIN

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 12 of 34

DXF IMPORT OF 2X5_R0 PAGE NO. 13

SUMMATION OF MOMENTS AROUND THE ORIGIN

SUMMATION OF MOMENTS AROUND THE ORIGIN

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 13 of 34

DXF IMPORT OF 2X5_R0 PAGE NO. 14

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 14 of 34

DXF IMPORT OF 2X5_R0 PAGE NO. 15

SUMMATION OF MOMENTS AROUND THE ORIGIN

SUMMATION OF MOMENTS AROUND THE ORIGIN

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )

D:\202425\Ankit\Staad Report\Design\2x5\Staad\2x5_R0.anl Page 15 of 34

DXF IMPORT OF 2X5_R0 PAGE NO. 16