Scribd
Upload
18 views1 page

Weinzierl 312 KNX Usb Interface 5229 Datasheet en

Uploaded by

bas.delang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
18 views1 page

Weinzierl 312 KNX Usb Interface 5229 Datasheet en

Uploaded by

bas.delang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Specification Installation Instructions

EN ▪ The device may be used for permanent interior


Electrical safety installations in dry locations or within distribution
▪ Protection (acc. EN 60529): IP20 boards with DIN rail.
Data sheet
CE marking according to
KNX USB Interface 312 ▪ EMC directive 2014 / 30 / EU
Compact USB Interface between PC and KNX bus ▪ RoHS directive 2011 / 65 / EU
▪ EN 63044-3: 2018
▪ EN 50491-5-1: 2010
EN 50491-5-2: 2010
EN 50491-5-3: 2010
▪ EN 61000-6-2: 2019
EN 61000-6-3: 2007 + A1: 2011
▪ EN 63000: 2018

Environmental requirements
▪ Ambient temp. operating: - 5 ... + 45 °C
▪ Ambient temp. non-op.: - 25 ... + 70 °C
▪ Rel. humidity (non-condensing): 5 … 93 %
(Art. # 5229)
Mechanical data WARNING
Application area ▪ Housing: plastic (PC)
▪ DIN rail mounted device, width: 1 unit (18 mm) ▪ The device must be mounted and commissioned by an
The KNX USB Interface 312 is a data interface between a ▪ Weight: approx. 40 g authorized electrician.
PC or laptop and the KNX installation bus. It can be used ▪ The prevailing safety rules must be heeded.
as a programming interface for ETS® Software Version 3 Controls and indicators ▪ The device must not be opened.
▪ For planning and construction of electric installations, the
(or higher) and supports KNX long frames. Long telegrams ▪ 2 LEDs, multicolor
relevant guidelines, regulations and standards of the
enable a faster download to devices that can receive these respective country are to be considered.
KNX
telegrams.
▪ Medium TP
The LEDs on the device indicate the operating status and ▪ Interface protocol: HID/cEMI
communication errors on the bus. The USB connector is ▪ Max. APDU length: 55
galvanic isolated from the KNX bus. ▪ Object Server: BAOS V2
▪ Device model: System B

Power supply
Notes for developers: In addition to the telegram inter-face
▪ USB < 15 mA
via cEMI, the KNX USB Interface 312 includes a complete
▪ KNX < 3 mA
KNX Stack with communication objects and BAOS protocol
V2. Thus, the device offers the possibility to extend devices Connectors
ETS6 Database WEINZIERL ENGINEERING GmbH
with USB connection to full KNX devices, which can even ▪ Connector for KNX TP Bus (red/black) www.weinzierl.de/en/products/312/ets6 Achatz 3-4
be programmed by ETS. USB: Connector type B, Manual 84508 Burgkirchen an der Alz
www.weinzierl.de/en/products/312/manual GERMANY
max. cable length: 5 m CE Declaration
For more information about this solution and available www.weinzierl.de/en/products/312/ Tel.: +49 8677 / 916 36 – 0
SDKs please contact WEINZIERL. ce-declaration E-Mail: [email protected]
Web: www.weinzierl.de

2022-05-12

You might also like