canfield connector
8510 Foxwood Court
Youngstown, Ohio 44514
(330) 758-8299 Fax: (330) 758-8912
www.canfieldconnector.com
series 5J Lighted and LOAD Suppressed Molded Mini, iso
and sub-micro solenoid valve connectors
General Description
The Canfield Series 5J all-molded DIN solenoid valve connector/gasket/cord
assembly offers a completely molded design that is far better for environmental
integrity than field wire versions. Made from rugged yet flexible polyurethane, the
connector housing boasts high durability factors and application versatility. The low
profile “90°” interface/cord configuration allows for installation in many limited space
applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes
it impossible to lose the gasket. The 5J and 5F are the only molded valve connectors
in the industry that feature a HARD USAGE cord as a standard option in any length
required, bi-directional indicator lights, and load suppression (not intended for UL
1449). UL and CSA versions are available as well. Canfield offers any version of the
5J connector with special wires including high flex, media compatible wire, special
use wire, high temperature wire on request.
ISO shown above
Dimensional Data Technical Data
all dimensions are IN Millimeters unless otherwise noted
• Cable outlet: Molded construction with wire exiting out perpendicular
MINI to the face of the coil
• Available in no circuit, lighted and load suppressed version for all
connectors
48.5 • Cable conductor colors:
28 European color code: Brown, blue, and yellow/green,
(with 4th conductor version black)
US color code: White, black, and green,
25.5 (with 4th conductor version red)
21 11
Specials on request
4.0 • Cable types: Pressure extruded PVC jacket
M3 Hard Usage cordage
“S” type with SJTOW standard PVC jacket
(ISO and Mini only)
• Cross section of conductor wire: 18 Gauge standard (ISO and Mini)
ISO 20 Gauge standard (Sub-Micro)
DIN 43650 Form “A”
• Rated voltage max.: 250V AC 50/60 Hz, 300V DC
• Rated current max.: 10 Amps (ISO and Mini), 6 Amps (Sub-Micro)
27 48.5 • Enclosure and molded in gasket materials: Polyurethane
• Ambient rated temperatures: -25° to 80°C
27 18
25.5 • Environment protection: IP 67 and NEMA 6, dust tight and water
resistant
4.0 • Available in four sizes:
M3 DIN 43650 Form “A” (ISO), EN175301-803:2000
18 DIN Form “C” (Sub-Micro 8mm), EN175301-803:2000
Industry standard (Sub-Micro 9.4mm pin spacing)
Available in 3+ Ground
Industry standard (Mini 11mm pin spacing)
SUB-MICRO • Pin configurations: For single solenoid valves - 2 connections plus
DIN 43650 Form “C” = 8mm, Standard = 9.4mm ground – Mini, ISO, Sub-Micro 8mm and Sub-Micro 9.4mm
For pressure switches, double solenoid valves and other devices, 3
connections plus ground – ISO, Sub-Micro 8mm and 9.4mm
16
Note: Slight discoloration may occur to translucent material after
prolonged exposure to UV rays.
8 or
16 9.4mm 27
Consult factory for available versions listed
by Canadian Standards Association for use
L with certified electrical equipment.
L=2.5 M3, (9.4mm) C US
L=1.9, M2.5 (8mm)
Available in 3+ Ground Consult factory for available versions
recognized under the Component
Program of Underwriters Laboratories, Inc.
A56-1336 Rev.07
Ordering Information Wiring Information
5J - - MINI ISO SUB-MICRO
Connector Type
3 - 8mm SM*
4 - 9.4mm SM*
5 - MINI**
6 - ISO
Wire Length
6 - 6 ft cord
F - 15 ft cord
Note:
ISO & SUB-MICRO
For additional wire lengths, consult factory. connectors available
in 3+ Ground
Contacts
0 - 2+ground down (MINI only)
1 - 2+ground up (MINI only)
2 - 3+ground down
3 - 3+ground up G 1 2 G 1 2 3 G 1 2 3
4 - 2+dual ground EUR yel & grn brn blu yel & grn brn blu blk yel & grn brn blu blk
(ISO/8mm/9.4mm only) US grn blk wht grn blk wht red grn blk wht red
HU
Ground left / right available, consult factory.
Operating Voltage Normal polarity: 1 = (+) Positive, Hot
0 - No light, no suppression*** 2 = (-) Negative, Neutral
2 - 6-24V AC/DC 50/60 Hz = Chassis Ground
5 - 48-120V AC/DC 50/60Hz
8 - 208-240V AC 50/60Hz
A - 6-24VDC
Suppression Type
0 - None
1 - Diode (DC only) Ground Up:
5 - Metal Oxide Varistor (MOV)**
Lighting Option
0 - Unlighted
1 - Lighted**
Wire Option
US - U.S.A. wire code / PVC jacket
EU - European wire code / PVC jacket Ground Down:
HU - Hard Usage / SJTOW jacket
(MINI & ISO only)
High flex, shielded and high temperature wire available on request.
For convenience and faster shipping, this
Housing Color
series is available in Can-Paks.
0 - Black (standard)
Translucent (if lighted)
1 - Gray
Packaging Code
A - Bulk Accessories:
G - Individual bagged WM-315 ISO/MINI Standard Wire Markers 10X Bag
L - Bulk MAC screw WM-218 Sub-Micro Standard Wire Markers 10X Bag
N - Individual bagged MAC screw
MAC is the registered trademark of MAC Valves, Inc. Ordering Example:
5J360-251-US0A
All connectors come standard with integrated gasket.
* 240 VAC voltage suppression and lighting not available. 8mm SM, 6 ft wire length, 2+ ground, 6-24V AC/DC
** NOT available in 3+ ground. 50/60 Hz, MOV, lighted, U.S.A. wire code / PVC
*** Rated 250V AC 50/60Hz, 300V DC. jacket, standard housing color, bulk w/ Canfield p/n
