Print - Create PDF - Create EXCEL file 10.10.
2010
-
17:15:34h
Datasheet - SSW 301HV-115V
Fail-safe standstill monitors / SSW 301HV
• Fail-safe standstill monitors
• This fail-safe standstill monitor has the particular advantage that no adjustment
for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
• Control category 4 to EN 954-1
(Minor differences between the printed image and the original product
may exist!)
Ordering details
Product type description SSW 301HV-115V
Article number 1196812
EAN code 4030661364971
Approval
Approval
USA/CAN
Global Properties
Product name SSW 301HV
Standards IEC/EN 60204-1, IEC 60947-5-3, EN 954-1, BG-GS-ET-14, BG-GS-ET-20
Compliance with the Directives (Y/N) Yes
Climatic stress EN 60068-2-3
Mounting snaps onto standard DIN rail to EN 60715
Terminal designations EN 50005, EN 50013
Materials
- Material of the housings Plastic, glass-fibre reinforced thermoplastic
- Material of the contacts , self-cleaning, positive action
Weight
Start conditions Automatic after detection of the standstill
Start input (Y/N) No
Feedback circuit (Y/N) Yes
Start-up test (Y/N) No
Reset after disconnection of supply voltage (Y/N) -
Automatic reset function (Y/N) Yes
Reset with edge detection (Y/N) No
Pull-in delay
- ON delay with automatic start approx. 7 s after detection of the standstill
Drop-out delay
- Drop-out delay in case of emergency stop < 15 ms
Mechanical data
Connection type Screw connection
Cable section
- Min. Cable section 0,5 mm²
- Max. Cable section 2.5 mm²
Pre-wired cable rigid or flexible
Tightening torque for the terminals 0,6 Nm
Detachable terminals (Y/N) No
Mechanical life 10.000.000 operations
Electrical lifetime Derating curve available on request
restistance to shock 30 g / 11 ms
Resistance to vibration To EN 60068-2-6 10 ... 55 Hz, Amplitude 0,35 mm
Ambient conditions
Ambient temperature
- Min. environmental temperature - 25°C
- Max. environmental temperature + 45°C
Storage and transport temperature
- Min. Storage and transport temperature - 25°C
- Max. Storage and transport temperature + 70°C
Protection class
- Protection class-Enclosure IP40
- Protection class-Terminals IP20
- Protection class-Clearance IP54
Air clearances and creepage distances To IEC/EN 60664-1
- Rated impulse withstand voltage Uimp 6 kV
- Overvoltage category III To VDE 0110
- Degree of pollution 2 To VDE 0110
Electromagnetic compatibility (EMC)
EMC rating conforming to EMC Directive
Electrical data
Rated DC voltage for controls
- Min. rated DC voltage for controls -
- Max. rated DC voltage for controls -
Rated AC voltage for controls, 50 Hz
- Min. rated AC voltage for controls, 50 Hz 97.75 V
- Max. rated AC voltage for controls, 50 Hz 126.5 V
Rated AC voltage for controls, 60 Hz
- Min. rated AC voltage for controls, 60 Hz 97.75 V
- Max. rated AC voltage for controls, 60 Hz 126.5 V
Contact resistance max. 100 mΩ
Power consumption 3.0 W, 4 VA
Type of actuation AC
Rated operating voltage Ue 115 VAC
Frequency range 50 / 60 Hz
Electronic protection (Y/N) No
Fuse rating for the operating voltage 80 mA slow blow
Inputs
Monitored inputs
- Short-circuit recognition (Y/N) Yes
- Wire breakage detection (Y/N) Yes
- Earth connection detection (Y/N) Yes
Number of shutters 0 piece
Number of openers 0 piece
Cable length 10 m
Outputs
Stop category 0
Number of safety contacts 3 piece
Number of auxiliary contacts 0 piece
Number of signalling outputs 1 piece
Switching capacity
- Switching capacity of the safety contacts max. 250 VAC, 6 A ohmic ( inductive in case of appropriate protective wiring)
- Switching capacity of the signaling/diagnostic outputs 24 VDC, 2 A
Fuse rating
- Protection of the safety contacts 6 A gG D-fuse
- Fuse rating for the signaling/diagnostic outputs 2 A gG D-fuse A
Number of undelayed semi-conductor outputs with signaling
function 0 piece
Number of undelayed outputs with signaling function (with
contact) 1 piece
Number of delayed semi-conductor outputs with signaling
function. 0 piece
Number of delayed outputs with signalling function (with contact). 0 piece
Number of secure undelayed semi-conductor outputs with
signaling function 0 piece
Number of secure, undelayed outputs with signaling function, with
contact. 3 piece
Number of secure, delayed semi-conductor outputs with signaling
function 0 piece
Number of secure, delayed outputs with signaling function (with
contact). 0 piece
LED switching conditions display
LED switching conditions display (Y/N) Yes
Number of LED´s 5 piece
LED switching conditions display
- The integrated LEDs indicate the following operating states.
- UB: Supply voltage available
- B: Frequency at channel B
- A: Frequency at channel A
- OUT: Enabling safety contacts 13-14, 23-24 closed
- ERR: Error functional defect
Miscellaneous data
Applications
safe standstill monitoring
Dimensions
Dimensions
- Width 90 mm
- Height 83 mm
- Depth 127 mm
notice
Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit.
notice - Wiring example
The sensor-free standstill monitor checks the e.m.f. of the three phase motor.
To secure a guard door
The wiring diagram is shown with guard doors closed and in de-energised condition.
Documents
Operating instructions and Declaration of conformity (de) 1 MB, 25.06.2010
http://127.0.0.1/Bilddata/Si_baust/Pdf/ssw301hv/bedien/DE/mrl_ssw_301hv_de.pdf
Operating instructions and Declaration of conformity (en) 899 kB, 21.01.2010
http://127.0.0.1/Bilddata/Si_baust/Pdf/ssw301hv/bedien/EN/mrl_ssw_301hv_en.pdf
Wiring example (99) 18 kB, 20.08.2008
http://127.0.0.1/Bilddata/Si_baust/ssw301hv/schaltun/kssw3l01.pdf
Images
Wiring example
K.A. Schmersal GmbH, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 10.10.2010 - 17:15:35h Kasbase 1.4.0 DBI
