AB

OU
T
Flexstone is a decorative
concrete system with a unique
technology developed in India
by a group of young and driven
entrepreneurs.

Understanding the need of

designers and the evolution of the
construction industry, a new
culture with sustainable &
handmade stones,​ concrete floors,
synthetic textures &

US
waterproofing
is developed by FlexStone Inc.

Inspired by nature and its

splendid beauty, FlexStone
offers a wide range of modern
and classical cladding
options. These are the result
of our continuous innovation
through research and product
development.
TH
E
ID
The endeavour has been to
make a green product where
stone-mining from mother
nature for cladding is reduced.
Flexstone products unlike
natural stones, are light
weight, easy to install and free
from algae and fungus. 80%

EA
of the raw materials used are
from recycled products, hence
making the product ecofriendly,
while contributing to preserve
nature.
CLUSTER
STONE
FlexStone introduces it’s unique stone aptly named ‘Cluster Stone’. This cladding consists of
a selection of “engineered stone” combined together to create a complete cluster, just as
nature had intended. Created with intense R&D using a cementatious base with polymers
and light weight aggregates, Cluster Stone is finished totally as a natural stone in its final
appearance, without the anomalies of stone.
CHISEL STONE

Uncoloured** Coverage 1.30 sq.ft /pc

Thickness 26mm approx
Kgs/Sq.ft 4.09 approx
Dimensions 23.5”x 8.5” (LxH)

WATERFALL STONE

Uncoloured**
Coverage 1.40 sq.ft /pc
Thickness 26mm approx
Kgs/Sq.ft 3.80 approx
Dimensions 23”x 9” (LxH)

** Any exterior-grade water based paint can be applied on uncolored stone

LEDGESTONE

Graphite Blended Slate

Coverage 1.65 sq.ft /pc

Thickness 65mm approx
Kgs/Sq.ft 3.83 approx
Dimensions 23”x 11” (LxH)
Corners Available in all colours
European Sand Cloudy White Mossy Oak

QUICKSTACK

Graphite Blended Slate

Coverage 0.90 sq.ft /pc

Thickness 50mm approx
Kgs/Sq.ft 4.06 approx
Dimensions 16.25”x 7.75” (LxH)
Corners Available in all colours
European Sand Cloudy White Mossy Oak

CASTLE ROCK

Graphite Blended Slate

Coverage 0.86 sq.ft /pc

Thickness 40mm approx
Kgs/Sq.ft 3.02 approx
Cloudy White European Sand
Dimensions 15.5”x 8” (LxH)
Corners Available in all colours
MUNICH STONE

Graphite Blended Slate

Coverage 0.55 sq.ft /pc
Thickness 34mm approx
Kgs/Sq.ft 3.27 approx
8”x 4” (LxH)
Dimensions 11.75”x 4” (LxH)
20”x 4” (LxH)
Corners Available in all colours
Cloudy White European Sand Mossy Oak

CALGARY STONE

Graphite Blended Slate

Coverage 0.55 sq.ft /pc
Thickness 40mm approx
Kgs/Sq.ft 3.36 approx
9”x 4” (LxH)
Dimensions 11”x 4” (LxH)
20”x 4” (LxH)

New Teak Mossy Oak Cloudy White

SERRA

European Sand

Coverage 0.25 sq.ft /pc

Thickness 25mm approx
Kgs/Sq.ft 3.00 approx
13.75”x 4” (LxH)
Dimensions
8 ”x 4” (LxH)
Graphite Cloudy White Corners Available in all colours
SPECTRE

Graphite
Coverage 0.44 sq.ft /pc
Thickness 30mm approx
Kgs/Sq.ft 2.50 approx
Dimensions 15.75”x 4” (LxH)

Feather White Mocha

RUBBLE STONE

Graphite Blended Slate

Coverage 1.75 sq.ft /pc
Thickness 65mm approx
Kgs/Sq.ft 5.50-10 approx
Dimensions 23”x 11” (LxH)

European Sand Mossy Oak Cloudy White

JASPER

European Sand Blended Slate

Coverage 2.30 sq.ft /pc

Thickness 37 mm approx
Kgs/Sq.ft 3.75-3.85 approx

Dimensions 21.50”x 16” (LxH)

Feather White Graphite Corners Available in all colours

COCO SQUARE

Feather White Graphite

Coverage 2.00 sq.ft /pc
Thickness 20mm approx
Kgs/Sq.ft 2.40 approx
Dimensions 23.5”x 11.75” (LxH)

Mocha New Teak

TORINO

Graphite Blended Slate 1.05sq.ft /pc

0.32sq.ft /pc
Coverage 0.52sq.ft /pc
0.21sq. ft /pc
Thickness 35mm approx
Kgs/Sq.ft 3.54 approx
19”x 8” (LxH)
11.5”x 4” (LxH)
Dimensions 19”x 4” (LxH)
Mocha Leopard Print Sandstone 7.5”x 4” (LxH)

Corners Available in all colours

FLAKY

Graphite Silver Grey

Coverage 2.50 sq.ft/piece

Thickness 25mm approx
Kgs/Sq.ft 2.45 kgs/sq.ft
Dimensions 24”x 15” (LxH)
Mocha Feather White
FOSSIL

Feather White

Coverage 3.25 sq.ft /pc

Thickness 25mm approx
Kgs/Sq.ft 3.57-3.65 approx
Dimensions 26”x 18” (LxH)
Mocha Graphite

FATHER CASTLE

Coverage 1.90 sq.ft /pc

Thickness 50mm approx
Kgs/Sq.ft 4.21-4.30 approx
Dimensions 22.75”x 12” (LxH)
Feather White Silver Grey

SKYFALL

Graphite Mesa Buff

Coverage 3.10 sq.ft/piece

Thickness 18mm approx
Kgs/Sq.ft 2.60 kgs/sq.ft
Dimensions 26.75”x 16.75” (LxH)
Mocha Feather White
AEH BRICK

Graphite

Coverage 0.17 sq.ft /pc

Thickness 20 – 24 mm approx
Kgs/Sq.ft 2.65 – 2.75 approx
Dimensions 9”x 3” (LxH)
Red Mocha Corners Available in all colours

DEMONETISED BRICK

Calcinated Wyno

Coverage 0.17 sq.ft /pc

Thickness 20 – 24 mm approx
Kgs/Sq.ft 2.65 – 2.75 approx
Dimensions 9”x 3” (LxH)
Calcinated Red Cloudy Ash Corners Available in all colours

FOSSIL BRICK

Coverage 0.17 sq.ft /pc

Thickness 20 – 24 mm approx
Kgs/Sq.ft 2.65 – 2.75 approx
Dimensions 7.5”x 2.16” (LxH)

Graphite
*Available in all Fossil Stone’s colors
FS BRICK

Burnt Red Brick Mossy Oak

Coverage 0.14 sq.ft /pc

Thickness 13mm approx
Kgs/Sq.ft 1.79 approx
Dimensions 8.46”x 2.36” (LxH)
Amber Cloudy White

WOODEN BRICK

Coverage 0.15 sq.ft /pc

Thickness 13mm approx
Kgs/Sq.ft 1.34 approx
Dimensions 9”x 2.4” (LxH)

Mocha

FLAME BRICK

Graphite

Coverage 0.12 sq.ft /pc

Thickness 13mm approx
Kgs/Sq.ft 1.67 Approx
Dimensions 7.5”x 2.16” (LxH)
Red Brick Cloudy White
BRICK NATURALE

Natural Graphite

Coverage 0.17 sq.ft /pc

Thickness 18 – 20 mm approx
Kgs/Sq.ft 2.65 approx
Dimensions 9”x 3” (LxH)
Corners Available in all colours
Red Brick Cloudy White

TRAVERTINE BRICK

Coverage 0.17 sq.ft /pc

Thickness 20 – 25 mm approx
Kgs/Sq.ft 2.65 – 2.75 approx
Dimensions 9”x 3” (LxH)

Mud Color

WRINKLE STONE

Cloudy White Graphite

Coverage 2.16 sq.ft /pc

Thickness 32 mm approx
Kgs/Sq.ft 4.70 Approx
Dimensions 26”x 12” (LxH)
Silver Grey Mocha
BASALT

European Sand Cloudy White

Coverage 1.15 sq.ft /pc

Thickness 60mm approx
Kgs/Sq.ft 4.00 approx
Dimensions 22”x 11.5” (LxH)
Blended Slate
Graphite

MADRID STONE

Graphite

Coverage 1.10 sq.ft /pc

1.05 sq.ft / pc
Thickness 50mm approx
Kgs/Sq.ft 5.00 approx
Dimensions 16”x 10 ” (LxH)
19”x 8” (LxH)
Sandstone Mossy Oak

NANO

Graphite

0.58 sq.ft /pc

Coverage 0.35 sq.ft /pc
0.23 sq.ft /pc
Thickness 40mm approx
Kgs/Sq.ft 3.85 approx
European Sand Cloudy White 21”x 4” (LxH)
Dimensions 12.5”x 4” (LxH)
8.5”x 4” (LxH)
Corners Available in all colours
SLEEPER WOOD

Coverage 1.70 sq.ft /pc

Thickness 27mm approx
Kgs/Sq.ft 3 approx
12”x 7.25” (LxH)
Dimensions
20.75”x 7.25” (LxH)
Natural

TRAVERTINE

Graphite Sliver Grey

Coverage 4.16 sq.ft /pc

Thickness 25mm approx
Kgs/Sq.ft 4.08 approx
Dimensions 30”x 20” (LxH)
Mocha Beige Dyna

TREE BARK

Coverage 2.58 sq.ft /pc

Thickness 25mm approx
Kgs/Sq.ft 2.90 approx
Dimensions 19.25”x 19.25” (LxH)
Natural
FS BAMBOO

Coverage 1.70 sq.ft /pc

Thickness 27mm approx
Kgs/Sq.ft 3.30-3.35 approx

Dimensions 24”x 6” (LxH)

Graphite Mocha

RANDOM LEATHER

Graphite Concrete

Coverage 4.20 sq.ft /pc

Thickness 25mm approx
Kgs/Sq.ft 3.35 approx
Dimensions 30”x 20” (LxH)
Mocha Beige

CONCRETE PANEL

Coverage 4.20 sq.ft /pc

Thickness 25mm approx
Kgs/Sq.ft 3.35 approx
Dimensions 30”x 20” (LxH)
Natural
 VEGAS STONE

Coverage 1.33 sq.ft /pc

Thickness 25mm approx
Kgs/Sq.ft 5.75 approx
Dimensions 24”x 8” (LxH)
Mocha Natural

ROYAL EGYPTIAN STONE

Coverage 0.88 sq.ft /pc

Thickness 20mm approx
Kgs/Sq.ft 3.10 approx
Dimensions 11.25”x 11.25” (LxH)
Natural Mocha
 RETROTINE STONE

Dyna

Graphite Beige

Coverage 4.66 sq.ft /pc

Thickness 35-40 mm approx
*Colors available Kgs/Sq.ft 4 approx
Dimensions 32”x 21” (LxH)
 ITALIAN LIMESTONE

Mocha

Coverage 3.13 sq.ft /pc

Thickness 25mm approx
Kgs/Sq.ft 16.2 approx

Dimensions 22.50”x 20” (LxH)

Natural Graphite

VOLCANIC ROCK

Silver Grey Cloudy White

Coverage 0.88 sq.ft /pc

Thickness 25mm approx
Kgs/Sq.ft 3.85 approx
Dimensions 15.75”x 8” (LxH)
Mocha Graphite

STITCH STONE

Graphite Charcoal Copper

Coverage 2.70 sq.ft /pc
Thickness 37mm approx
Kgs/Sq.ft 3.50 approx
Dimensions 26”x 15” (LxH)
BUBBLE STONE

Coverage 2.60 sq.ft /pc

Thickness 27mm approx
Kgs/Sq.ft 3.50 approx

Dimensions 26.75”x 14” (LxH)

Kahlua Color*

WAVE STONE

Coverage 2.44 sq.ft /pc

Thickness 25mm approx
Kgs/Sq.ft 3.50 approx
Dimensions 25”x 14” (LxH)
Silver Grey*

HEXA STONE

Coverage 2.34 sq.ft /pc

Thickness 25mm approx
Kgs/Sq.ft 3.85 approx
Dimensions 24”x 14” (LxH)
Kahlua Color*

*Available in other colors.

MERC STONE

Coverage 1.62 sq.ft /pc

Thickness 32mm approx
Kgs/Sq.ft 3.50 approx

Dimensions 16”x 16” (LxH)

Silver Grey Color*

QUBE STONE

Coverage 0.93 sq.ft /pc

Thickness 23mm approx
Kgs/Sq.ft 3.50 approx
Dimensions 11.60”x 11.60” (LxH)

Uncolored & Cloudy White Color*

Being hexagonal in shape do not use the measurement to determine Sqft of product

*Available in other colors.

WOOD BONES

Coverage 3.55 sq.ft /pc

Thickness 25-40mm approx
Kgs/Sq.ft 3.50 approx

Dimensions 16”x 32” (LxH)

*Available in other colors.

// TREE BARK (NATURAL) // TRAVERTINE (MOCHA)

// TORINO (GRAPHITE) // CALGARY (NEW TEAK)

// QUICKSTACK (EUROPEAN SAND) // NANO (GRAPHITE)

VERTICAL
STAMPING
Stamped concrete, also referred to as imprinted concrete, textured or embossed concrete, is concrete that
has been made to look like another material such as granite, stone, tile, slate, etc.

Stamped concrete has been around for many decades and is found on driveways, pool decks,
entryways, patios, courtyards, and walkways, both commercial and residential properties. FlexStone
takes this proven technology one step ahead with its 5 step methodology, which enhances the
aesthetic look of the floor with its unique shadow impact technique.

Vertical Stamping is very suitable for one of a kind and unique application; it is also a perfect
choice for designers to use this product in houses, restaurants, hotels, clubs, showrooms and
other such suitable areas.
VS001 – Granite Texture Skin

VS002 – Stone Texture Skin

SYNTHETIC
STUCCO
TEXTURES
DESCRIPTION: Flex Stone Inc. Synthetic Stucco is a durable, high quality, integrally colored, acrylic
copolymer textured finish offered in unique textures. It is formulated to ensure a superior finish that resists
water, mold and dirt accumulation. Drying of the finish is dependent on the air temperature, relative
humidity and coating thickness.

TYPICAL USES: Flex Stone Inc. Synthetic Stucco is specifically designed to provide texture and color over
Portland cement plaster, cast-on-site, pre-cast concrete and concrete masonry units.
FEATURES & BENEFITS:
• Predominately acrylic resins used as binder with expanded glass beads
• Minimal ageing effect
• 5°C temperature variation observed amongst the interior & exterior area
• 100% water proof
• Made from recycled material (80% by vol.)
• Resists water, mold and dirt accumulation
• Can earn Leadership in Energy & Environmental Design (LEED) points
SS - 11 SS - 71 SS - 81

SS - 21 SS - 51 SS - 61

SS - 110 SS - 31 SS - 41
 SS - 120

GLASS AGGREGATE BASE

BRICK TEXTURES ALSO AVAILABLE

CONCRETE FLOORS
• Decorative Stamp Concrete Floor – 12 stamps
• FlexHyQot Floor
• AEH Floor
• Deck Wood Floor
• Floor Brick
• Penta Floor
DECORATIVE
STAMP
CONCRETE
FLOOR
Stamped concrete, also referred to as imprinted concrete, textured or embossed concrete, is concrete that has
been made to look like another material such as rock, cobblestone, tile, slate, brick or wood.

Stamped concrete has been around for many decades and is found on driveways, pool decks, entryways,
patios, courtyards, and walkways, both commercial and residential properties. FlexStone takes this proven
technology one step ahead with its 5 step methodology, which enhances the aesthetic look of the floor with its
unique shadow impact technique.

Decorative Stamp Concrete Floor is created by using a super strong concrete mix which is then stamped
with specialized textured mats to create a surface texture that resembles natural stone, brick, paving or
any other of countless variations.
Decorative Stamp Concrete floor is non-porous, impermeable surface, which means that weeds can’t
grow through it and that stains such as oil can be easily cleaned off. The colors are 100% UV and do not
fade away as a result of direct sunlight.
GARDEN STONE EUROPEAN FAN STONE

No. ITB-001 (106 x 106 cm) No. ITB-003 (66 x 117 cm)

ASHLAR STONE RANDOM BLUE STONE

No. ITB-007 (61 x 61 cm) No. ITB-008

HERRINGBONE STAMP LONDON COBBLE STAMP

No. ITB-009 (81 x 91 cm) No. ITB-010 (43 x 76 cm)

OLD ENGLISH STAMP WESTERN ASHLAR

No. ITB-011 (43 x 76 cm) No. ITB-012 (61 x 61 cm)

GRANITE SKIN STAMP WOOD PLANK

TS-001 (90 x 90 cm) No. ITB-015 (30 x 90 cm) / (30 x 120 cm)

PALLADIAN SLATE STONE PEBBLE STONE

No. ITB-002 (91 x 91 cm) No. ITB-014 (81 x 81 cm)

PENTA FLOOR

Statuario finish

FEAUTRES -

• UHPC – Ultra High Performance Concrete Coverage 5.76 sq.ft /pc

Thickness 30mm approx
• High Compression strength .
Kgs/Sq.ft 6.94 approx
• Exterior & Interior applications Dimensions 40”x 30” (LxH)
• No VOC
• Easy to install, no framing needed.
*Being pentagonal in shape do not use the dimensions to determine sqft of product.
 AEH - AQUEOUS EPOXY HYBRID

The newly developed AEH system is without any solvent addition during manufacturing
and application. This has the benefit of easy application and high performance/cost ratio.
This new product not only provides the desired mechanical properties for floor protective
coatings and adhesive but also offers excellent weather availability, in the final
formulated products with the unique hybrid technology.

Advantages Uses
•Economical •Floors, Walls & Roofs
•Water Resistant •Ponds
•Sun Reflectivity •Wet Areas
•Crack-Bridging •Pedestrian Decks
•Simple Application •Detail Waterproofing
•Anti-Root Properties •Balconies and Terraces
•Full Surface Adhesion •Parking Decks / Bridges
•Water Vapor Permeable •Decorative Waterproofing
•Resistant to Detergents, Oils, and Common Chemicals •Acrylic/Epoxy Liquid Membrane
•Forms Seamless Membrane without Joints or Leak
Risk Areas
•Easy Local Repair, in Case Membrane is
Mechanically Damaged
•Maintaining Mechanical Properties at a Temperature
Range of -30o C to +90o C
•Waterproofed Surfaces Usable for Medium to Heavy
Pedestrian Traffic/ Light vehicular traffic, Dependent
on FlexStone AEH System Top Coat
Properties
Type AEH (Acrylic Epoxy Hybrid)
Colour Standard / Customized
Density 8.2 ± .15 lbs/gal
Application Trowel, Brush roller
Application Temperature +5°C to 35°C
Cure Time 120 Hours
Thickness Varies from 1mm to 2mm
Adhesion to Concrete (Peel, N/m) Results: 1200 N/m Method: ASTM C-836
Elongation Results: 100% Method: ASTM D-412
Low Temperature Flexibility Results: Flexible to Method: CGSB 37.58-M86
-20°C (-4°F)
Crack Bridging Ability Results: Exceed 30 Cycles Method: CGSB 37.58-M86
at -20°C (-4°F)

Water Vapour Permeance Results: <1 perms for 60-mil Method: ASTM E-96
wet coating (grains/sf/hr) Wet Method
Resistance to Degradation in Soil Results: Good Method: ASTM E-154

Mould Growth and Results: No Degradation Methods:ASTM D-3273,

Bacterial Attack ASTM D-3274
PLAYGROUNDS

BLEACHERS
CORRIDORS
 Epoxyself-levelling flooring

PRODUCT DESCRIPTION

Self-leveling epoxy based electrostatic dissipative hygienic floor coating

FEATURES

• Electrostatically static dissipative SL floor coating, meets the ANSI/ESD S 20 20 2014 and DIN EN1081
• Easy to clean and maintain
• Seamless and hygienic in nature
• High abrasion and impact resistance
• Excellent chemical resistance
• Finds application in pharmaceutical units,Electronics manufacture and assembly, Hospital operation room

TECHNICALDATA

Colour Any Color

Gloss Matt
Recommended DFT/ Coat 1.5 mm
Theoretical Covering Capacity Minimum 0.40 sq.mtr/ kg
Drying Time Surface Dry : 4 hours
Hard Dry : 24 hours
Full Cure : 7 days
Mixing Ratio (By weight) Base : Hardener : Aggregates : fibre
30.40 : 18.60 : 51 : 0.07
Pot life
30 minutes

MECHANICAL PROPERTIES

Compressive Strength (ASTM C 579) 60 MPa

Flexural Strength (ASTM C 580) 33 MPa
Tensile Strength (ASTM C 307) 16 MPa
Shore D Hardness, (ASTM D 2240) 70 - 75
Abrasion resistance, CS 17, 1000 cycles (ASTM D 4060) 72 mg

ELECTRICAL RESISTANCE, ANSI / ESD S 20 20 2014

Surface to Ground resistance 1 x 10 5 - 1 x 109Ohms

Body Voltage < 20 volts

The data given is for guideline only. The physical values are subject to normal manufacturing tolerances, colour and testing variances
The coverage & consumption figures are theoretical and do not allow for any additional material required due to surface porosity, surface
profile, variations in level or wastage etc
The actual drying time/ overcoat interval may be shorter or longer, depending on film thickness, ventilation, humidity, temperature etc
The information provided above is at 30°C and 65% relative humidity
 APPLICATIONS INSTRUCTIONS

Substrate Quality

• Concrete substrates must be sound and of sufficient compressive strength (minimum 20 Mpa) with a minimum
tensile strength of 1.5 Mpa

• A sound, clean and dry substrate is absolutely essential for successful coating application and ensuring maximum
bonding between the substrate and coating system

• Thesubstrate must be clean, dry and free of all contaminants such as dirt, oil, grease, coatings and surface treatments,
etc. and have a moisture content less than 5% prior to application of the primer. Ensure that the substrate does not
suffer from rising moisture and potential osmosis problems

New concrete floors

Should be at least 28 days old or have a moisture content of less than 5% before proceeding with epoxy primer
application. Laitance and deposits on new concrete floors are preferably removed by light grit/ shot blasting,
mechanical scarifying or grinding to achieve an open textured surface.

Old concrete floors

• Determine the general condition, soundness, presence of contaminants, presence of moisture vapour emissions and
the best methods to prepare the surface to receive floor coating system. Mechanical surface profiling by grit or shot
blasting, grinding or scarifying are the preferred floor preparation methods on old concrete floors

• Hydrophobic contaminants can be identified by asimple water drop test. Other contaminants can be identified by pH
• Remove localized weak or deteriorated materials from the surface. Remove bond-inhibiting materials such as oils,
grease, wax, fatty acids, and other contaminants. This can be accomplished by the use of detergent scrubbing,
low pressure water cleaning (less than 5000 psi), steam cleaning, or chemical cleaning. Acids and alkalis can be
removed by neutralizing to form a water soluble salt and then high pressure water cleaning and mopping it off to dry
state

• In the areas where the contaminants cannot be removed, complete removal and replacement of the contaminated
surface is typically considered

• Surface defects such as voids, bug holes, excess porosity, and physical and chemical damage are usually filled
or repaired prior to the installation of the floor coating system. Materials such as slurries, mortars, and polymer
concrete are used to level, smooth and patch concrete surfaces. High spots must be removed by grinding

Note: Acid etching of the surface is not recommended as a preparation technique partly because of the implications
for Health & Safety but also because the surface is left saturated with water and calcareous salts which may ultimately
lead to debonding or osmotic blistering

Floor Joints

• All cracks and construction joints present, based on the depth of the crack, should be filled either with epoxy putty
or mortar after primer application
• The expansion joints should not be overcoated with the coating and to be addressed with suitable material

Priming

• All surfaces to be primed with FlexHyQotHFP 120 penetrating primer designed for maximum absorption and
adhesion to concrete substrates. The primer should be applied immediately to the prepared substrate using stiff
brushes and/ or roll ers. The primer should be well ‘scrubbed’ into the substrate to ensure full coverage, but care
should be taken to avoid over application or ‘ponding’
• Allow the primer to dry before proceeding to the next stage; do not proceed whilst the primer is ‘tacky’ as this will
lead to unsightly marks in the finished surface
• After application ofpenetrating primer place a self-adhesive conductive tape as per specification
• Apply a coat of FlexHyQot ESD undercoat primer over dried penetrating primer (FlexHyQot HFP 120). The
FlexHyQot ESD primer shall be applied with a roller or brush to achieve total film thickness of 80 -100 microns.
The primer should be allowed to “set” prior to the placement of FlexHyQot ESD SL topcoat.
• Freshly applied primer should be protected from damp, condensation and water for at least 24 hours

System

Application Product Thickness (microns)

Penetrating primer FlexHyQot HFP 120 125 - 150
Conductive adhesive tape
Conductive primer FlexHyQot ESD primer 80 - 100
Top coat FlexHyQot ESD SL 1500 - 2000

Mixing

• ESD SL flooring is supplied in 4 pre-weighed packs (Base, Hardener, Aggregate and conductive fibre) which are
ready for immediate on-site use. Part mixing of these components is not acceptable and will affect both
performance and appearance of the finished floor.

• A suitable power driven mixer such as a bucket mixer is recommended for uniform mixing of the screed material.
Stir the base and hardener separately. Blend the aggregates in the bag. Mix hardener gradually into the base
under continuous stirring. Mix the aggregates into the mixed resin portion uniformly under continuous mechanical
agitation. Then mix the conductive fibre at slow speed in mix composition. Mix well for 3-4 minutes till the
components become homogenous. Apply after induction time and before expiry of pot life.

Application

• The product may be applied by a serrated/ notch trowel to the required thickness. The entire mixed material should
be poured onto the prepared and primed surface and spread slowly and evenly. To ensure proper levelling and
appearance avoid overspreading. The laid material should be rolled firmly with a spike roller to ensure compactness
and de-aeration of the film. Always wear spike shoes when rolling with spike roller. The rolling should be carried out
using a ‘back and forth’ technique along the same path. An overlap of 50% with adjacent paths is recommended.
Further light rolling may be required to remove surface imperfections, or for subsequent release of trapped air. This
should be done prior to the setting of the product. To avoid roller marks prevent over rolling of the coating

• The coverage & levelling would vary significantly based on the nature & levelling of the concrete surface

• Freshly applied FlexHyQot ESD SL should be protected from damp, condensation and water for at least 24 hours
• At low temperatures, the chemical reactions are slowed down; this lengthens the pot life, open time & curing
times. High temperatures speed up the chemical reactions thus the time frames mentioned above are shortened
accordingly

Application Conditions

• Residual moisture content of the concrete substrate should not exceed 5%

• No rising moisture & potential osmosis problems

• Substrate temperature should be at least 3°C above dew point but not above 50°C

• Recommended ambient temperature for application is between 10°C - 40°C

• Relative Air Humidity (RH) to not exceed beyond 80%
 Cleaning

All tools and equipment can be cleaned with Thinner T 141 immediately after use.
Note: FlexHyQot ESD SL should not be applied to asphalt, weak or friable concrete, unmodified sand/cement
screeds, PVC tiles or sheet or substrates known to move substantially e.g. steel walkways. In common with
all epoxy materials some light shade changes may be experienced over the long term when placed in adverse
exposure conditions. Any such change in shade is not regarded as being detrimental to performance.

PACK SIZE 10 kg (Base: 3.04kg, Hardener: 1.86 kg, Aggregate: 5.1 kg, Conductive fibre: 7
gm.)

STORAGE Shelf Life: At least 12 months if stored properly in original, unopened

andundamaged sealed packaging, in dry conditions at temperatures
between 5°C to 35°C, subject to inspection thereafter.
Store in a cool, dry place and in accordance with local regulations

REGULATORY Flash Point: Base - Not less than 24°C; Hardener - Not less than 24°C

INFORMATION VOC: 52gm/ ltr as per USA-EPA Method 24

SAFETY INFORMATION

• As a general safety measure, inhalation of solvent vapours or paint mist and contact of liquid paint with skin
& eyes should be avoided. Forced ventilation should be provided when applying paint in confined spaces or
stagnant air. Even when ventilation is provided, respiratory, skin and eye protection is always recommended
while spraying paint

• Please refer our Material Safety Data Sheet prior to using the product
•

•
•
–
–
–
–

–
–

–
–
–
–
–
–

–
–
–

•
•
–
•
–
•
•
–

°
 °

Water Swell Water Swell PERMS Wet Peel Adh; Water tightness 7d* Ignitability
7 day 14 day SBS (EN 14891 A.7) (EN ISO 11925-2**, 15s)

(%) (%) US Perm N/25m Mode (ml)

m
F1-58 - White 8.6% 7.8% 5.75 5.25 A 0 Pass, no burning
droplets
F1-58 – Light 7.5% 6.9% 4.9 5.25 A 0 NA
Gray
•

•
°

•
 °

• °

•
•
•
 Ɛ

–
www.flexstoneinc.com
&