0-10 PWM LOW VOLTAGE OUTPUT STATION-DIN
Load Controls
The 0-10 PWM Low Voltage Output Station-DIN is used for
the control and automation of LED, CLF and CCFL lighting
loads requiring either 0-10 or PWM for dimming control.
Each LVOS DIN features eight 0-10 outputs with four that
can be turned into PWM outputs. The LVOS DIN is firmware
upgradable in the field through its station bus, has four dry
contact inputs with two addtional override inputs and is
powered by 13.8 to 36VDC.
The dry contact inputs can be used with motion sensors,
light sensors, pressure sensors, IR input, magnetic switches,
and more.
Product Highlights
• Controls up to eight separate sets of LED, CFL, or CCFL lighting loads
• Offers control of either 0-10 or PWM type loads
• Allows for the addition of dry contact inputs to the automation network
including motion sensors, light sensor, IR input, pressure sensors,
magnetic switches, and more
• Manual control and LED status for all eight outputs on front
• Installs on DIN rail
• Powered by 13.8 to 36VDC
• Firmware upgradable in the field
0-10 PWM Low Voltage Output Station-DIN
STATION LVOS-0-10- 1 2 3 4 STATION
OUT
OUT
OUT
OUT
GND
OFF
GND
ON
BUS IR SENS SERIAL NUMBER BUS
CLASS 2 PWM-DIN CLASS 2
TOP VIEW 60mm
96mm
SET
1 2 3 4 5 6 7 8
RED = 0-10
GREEN = PWM LOW VOLTAGE OUTPUT STATION-0-10-PWM-DIN
STATUS
1 2 3 4 5 6 7 8
SIDE VIEW
INPUT LVOS-0-10-PWM-DIN
GND
GND
GND
GND
GND
GND
GND
GND
GND
0-10: 10VDC@100mA MAX
OUT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
13.8-36
VDC PWM: 12VDC@100mA MAX
157mm
FRONT VIEW BOTTOM VIEW
Specifications
Dimensions, HWD
3.4” x 6.18” x 2.375”
86mm x 157mm x 60mm
General Specifications
Model LVOS-0-10-PWM-DIN
Weight 2lbs 8oz (1.13kg)
Mounting DIN Rail
Ambient Operating Humidity 5-95% non-condensing
Ambient Operating Temperature 0-35°C (32-95°F)
Auxiliary Inputs 4 Dry Contacts
Override Inputs 2 (On and Off Contacts)
Input power 13.8 - 36VDC
Power Consumption 15W
LED Indicators Microprocessor Status, Configuration, Load
Number of Low Voltage Loads 8 Low Voltage Loads
100mA Sink/Source (0-10)
100mA Source (PWM)
Station Equivalent InFusion 0.35W on IC-24 / 0.55W on IC-36
Station Bus Connections 24V / 36V Station Bus
CE Listed Yes
Wiring Specifications
Station Bus Wiring Minimum 2 conductor, 16 AWG stranded, non-shielded twisted pair, 30 pF/foot max, UL rated CL2
Station Bus Topology Any combination of daisy chain or star or branch
Station Bus should be separated a minimum of 18” from other parallel communication
and/or high voltage runs
System Compatibility
InFusion
1061 South 800 East Orem, Utah 84097 800.555.9891 801.224.0355 fax www.vantagecontrols.com
