CBT MCT INDEX

- Alert number 묻는 유형 8개

- FURUNO ECDIS 의 information 을 찾는 문제 4개

- Where do you set ~~? 8개

- When an ENC is outlined in Color 6개

- Where do you control 3개

- Which regarding function is available in the FURUNO ECDIS? 3개

- How do you add navigational chart ~~? 3개

- Which operation can you perform 8개

- Which printing option is available for the User Chart? 1개

- Which ECDIS setting is activated in ~~? 3개

- When the software of the FURUNO ECDIS is being ~~? 2개

- How are regular T&Ps updated on the ECDIS? 1개

- Where can you change ~~? 2개

- What should you remember ~~? 2개

- How do you ~~? 13개

- Where do you change ~~? 7개

- Where do you switch ~~? 1개

- Where do you offset ~~? 1개

- Where can you find ~~? 2개

- Where can you display ~~? 1개

- How can you ~~? 6개

- Which information can you find ~~? 6개

- Can you create a Manual Update ~~? 2개

- Can you ~~? 8개

- ETC. 9개
What does that alert number 257 indicate?

- a: Heading sensor not available

- b: prg track : Need higher speed

- c: prg track : Use radius Ctrl

- d: Gyor 3 COM error

What does that alert number 635 indicate?

- No official data

- Log error

- Dual axis log (WT) error

- Dual axis log (BT) error

What does the alert number 495 indicate?

- Anchor watch error

- Track control stopped

- Steering parameter error

- Filter : lnit. Error

What does the alert number 470 indicate?

- WGS 84 not used

- Different geodetic datum

- Sentence syntax error

- Datum change
What does the alert number 380 indicate?

- Route – File read error

- User chart : File not found

- AIS COM error

- User chart : File read error

What does the alert number 640 indicate?

a. Datum mismatch

b. Chart align: Over 30 min.

c. RADAR antenna ID error

d. Gyro error (Trackpilot)

What does the alert number 450 indicate?

a. Route: Illegal to WPT

b. RADAR comm. Error

c. LAN adapter version error

d. Heading sensor not available

What does the alert number 031 indicate?

a. Sensor adapter 1 COM timeout

b. Sensor adapter 2 COM timeout

c. Sensor adapter 3 COM timeout

d. Sensor adapter 4 COM timeout

Where do you find information on Magnetic Variation in the ENCs on the FURUNO ECDIS?

- In Chart Display

- In Chart Catalogue

- In Chart Alert

- In Chart Legend

Where do you find information on the Conning software version of the FURUNO ECDIS?

a. In the Voyage Log

b. In the system dialogue of the Menu

c. In the about dialogue

d. In the S52 Presentation library

Where do you find information on the presentation library used in the FURUNO ECDIS?

a. In the Basic Setting of the Menu

b. In the Record function of the Quick Access bar

c. In the System Dialogue of the Menu

d. In the About dialogue

Where do you find information on the software version of the FURUNO ECDIS?

a. In the Voyage Log

b. In the System dialogue of the Menu

c. In the About dialogue

d. In the S52 Presentation library

Where do you set up the chart watch sector to scan the ENCs for problems along own ship's

heading line?

a. In Chart Display setting

b. In Chart Alert settings

c. In Basic setting

d. In Check Area Setting

Where do you set up the Safety Contour used for planning your route?

a. On the Parameters tab of the Route Planning tool

b. In Chart Display

c. In Chart Alert settings

d. In Own Ship settings

Where do you set the Safety contour?

- In Chart Legend

- In Symbol Display

- In Chart Alert

- In Chart Display

Where do you set the Shallow Pattern?

a. In Chart Display

b. In Symbol Display

c. In basic Setting

d. In Chart Catalogue
Where do you set the Shallow Contour?

a. In Chart Legend

b. In Symbol Display

c. In Chart Alert

d. In Chart Display

Where do you set the Deep Contour?

a. In Chart Legend

b. In Symbol Display

c. In Chart Alert

d. In Chart Display

Where do you set the Safety Depth?

a. In Chart Legend

b. In Symbol Display

c. In chart Alert

d. In Chart Display

Where do you set system priority of multiple GPS connected to the FURUNO ECDIS?

a. In the Sensor dialogue

b. In Basic Setting

c. In Ship and Route Parameters

d. In Nav Tools
When an ENC is outlined in Yellow in the Chart catalogue – it means?

- License is valid – chart is NOT up-to-date

- License is available – chart not installed

- License is valid –up-to-date status doubtful

- License is not available or has expired

When an ENC is outlined in Orange in the chart Catalogue – it means?

- License is valid – Chart is up-to-date

- License is valid – chart is NOT up-to-date.

- License is available – chart not installed

- Cancelled chart

When an ENC is outlined in Magenta in the Chart Catalogue – it means?

- License is valid – chart is up-to-date

- License is valid – chart is NOT up-to-date

- License is available – chart not installed

- License is valid – up-to-date status doubtful

When an ENC is outlined in Green in the Chart Catalogue – it means?

- License is valid – chart is up-to-date

- License is valid – chart is NOT up-to-date

- License is available – chart not installed

- License is not available or has expired

When an ENC is outlined in Red in the Chart Catalogue –it means?

a. License is valid – chart is NOT up-to-date.

b. License is available –chart not installed

c. License is valid – up-to-date status doubtful

d. License is not available or has expired

When an ENC is outlined in Blue in the chart Catalogue – It means?

a. License is valid – chart is up-to-date

b. License is valid – chart is NOT up-to-date

c. License is available – Chart not installed

d. Cancelled chart

Where do you control the setting and visibility of the chart layers?

a. In Chart Legend

b. In symbol Display

c. In chart Display

d. In Basic Setting

Where do you control the Safety Contour displayed on the Charts on the FURUNO ECDIS?

a. In Chart Alert

b. In the route planning tool – on the Alerts tab

c. In Chart Display

d. No where – it is set up automatically

Where do you control the AIO?

a. In Chart Legend

b. In Symbol Display

c. In Chart Display

d. In Chart Catalogue

Which recording function is available in the FURUNO ECDIS?

a. AIS Log

b. Engine Log

c. Voyage Log

d. RADAR Log

Which recording function is available in the FURUNO ECDIS?

a. Danger Targets Log

b. Engine Log

c. Speed Log

d. GPS Log

Which recording function is available in the FURUNO ECDIS?

a. Gyro Log

b. Engine Log

c. Ship’s Log

d. Details Log
How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so

by a Navtex message?

- I cannot add any chart objects to the ECDIS unless they are included in the weekly update

CDs.

- I use the Manual Updates function

- I use the User Chart function

- I use the Chart Edit function

How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so

by information received via VHF broadcast?

a. I cannot add any chart objects to the ECDIS unless they are included in the weekly update

CDs

b. I use the Manual Updates function

c. I use the User Chart function

d. I use the Chart Edit function

How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so

by Notices To Mariners?

a. I cannot add any chart objects to the ECDIS unless they are included in the weekly update

CDs

b. I use the Manual updates function

c. I use the User Chart function

d. I use the Chart Edit function

Which operation can perform during a voyage after completion of a voyage?

- I can use the Record function to record special events in the Voyage Log

- I can create and save a screen shot for future reference

- I can view and print a copy of the Details Log.

- I can connect the ECDIS to the Internet and upload all documentation to an external

storage

Which operation can you perform on the FURUNO ECDIS?

- I can play back my ship’s past track on the ECDIS

- I can record my position manually on the RNCs.

- I can create Notes from my Voyage Log to document a voyage on the charts.

- I can set the ECDIS to include engine log information into the Voyage log automatically

Which operation can you perform after completion of a voyage?

a. I can add additional records of manual positions to the Voyage Log adding further detail

to the past

b. I can create a User Chart from the monitored Route Plan and save it to a USB memory

device

c. I can create a backup copy of the voyage log on a USB memory device

d. I can view and print a copy of the Chart usage Log

Which operation can you perform during a voyage?

a. I can use the Event function to record special events in the Event Log.

b. I can create a User Chart from the Alert Log and save it to a USB memory device

c. I can create a User Chart from the Usage Log and save it to a USB memory device

d. I can create a User Chart from the Voyage Log and save it to a USB memory device
Which operation can you perform during a voyage or after completion of a voyage?

a. I can use the Event function to record special events in the Details Log

b. I can view and print a copy of the Voyage Log

c. I can create a backup copy of Own Ship’s past rack (120 minutes max.) on a USB

memory device and in a safe location for future reference

d. I can reset the Chart Usage Log after creating a backup copy

Which operation can you perform on the FURUNO ECDIS?

a. I can record target ship’s positions in the Voyage log automatically

b. I can record a position fix manually by using just one distance and one bearing

c. I can playback my past voyage track on the charts

d. I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display on the

GPS

Which operation can you perform on the FURUNO ECDIS?

a. I can record my position manually on the ENCs

b. I can set the ECDIS to automatically choosing a Safety Contour based on my setting of

ship’s maximum ?

c. I can set Ship’s maximum height to enable chart alerts from areas in the charts where is

not su? Draft

d. I can send a copy of my Route Plan to an AIS target as a Safety Message

Which operation can you perform with the FURUNO ECDIS?

a. I can send my Route Plan and User Chart to any RADAR for display on the RADAR

b. I can send my Route Plan and User Chart to any AIS for display on the AIS

c. I can send my Route Plan and User Chart to any GPS for display on the GPS

d. I can send my Route Plan and user Chart to a FURUNO RADR for display on the RADAR
Which printing option is available for the User Chart?

a. Tidal Report

b. Full report

c. System report

d. Detailed report

Which printing option is available for the User Chart?

a. Circle Report

b. Full report

c. System report

d. Detailed report

Which ECDIS setting is adjusted in Ship and Route Parameters?

- Chart alignment

- Safety Contour

- Maximum rate of turn

- Safety depth

Which ECDIS setting is adjusted in Ship and Route Parameters?

- Position offset

- Safety contour

- Alarm volume

- Ship’s maximum speed

Which ECDIS setting is activated in Ship and Route Parameters?

a. Gyro Error

b. Safety Contour
 c. Notes alarm times

d. Ship’s minimum speed

When the software of the FURUNO ECDIS is being updated – it is important that?

- The multiple GPS connected to the ECDIS are updated with the new software version.

- That it is done when the ECDIS is not being used for navigation (in port etc.).

- The HUBs connected to the ECDIS are updated with the new software version

- The RADAR connected to the ECDIS is not being used (in port etc.).

When the software of the FURUNO ECDIS is being updated - it is important that?

a. The software should be loaded from a USB memory device

b. The FURUNO ECDIS is put in Standby mode before updating

c. You create backup copies of all critical info in the ECDIS before updating

d. The ECDIS is disconnected from the RADAR

How are regular T&Ps updated on the ECDIS?

a. T&P must always be created as Manual Updates.

b. I create a Manual Update containing the T&Ps using the Manual function in the Load &

Update function Chart Menu

c. Most T&Ps are include in the weekly update CD and these are updated automatically

together with updates on the CD

d. I cannot update T&Ps on the FURUNO ECDIS

Where can you change the setting of the Safety Contour which is used during planning of a route?

a. Nowhere – because I must never change the setting for the Safety Contour
 b. In the Settings menu and I can only change the setting if I have the service password

c. In chart Alert

d. In the route planning tool

Where can you change the settings for the Safety Contour used for monitoring?

a. Nowhere – because I must never change the setting for the Safety Contour

b. In the Settings menu and I can only change the setting if I have the service password

c. In chart Alert

d. In the route planning tool

What should you remember to set up before planning a route?

a. The settings for the Voyage Log

b. The Alarm Level in the Operation submenu

c. The conning Display in Installation Parameters

d. The Chart Viewing Dates

What should you remember to set up first when planning a route?

a. The settings for the Voyage Log

b. The Alarm Level in the Operation submenu

c. The Safety contour in the route planning tool

d. The Radar overlay

How do you enter informative notes in the User Chart?

a. I select Note as an option for the Area Line or Circle where the information should be

displayed
 b. I select Note as an option for the Tidal Label or Clearing Line Where the information

should be displayed

c. I select User Chart from the Main menu and then I select Plan and enter the note to be

displayed

d. I left click on Route in the Quick Access Bar and then I select Monitor

How do you document your previous voyage on the FURUNO ECDIS?

a. I use my paper logbook as documentation

b. I use my paper Logbook and my VDR or SVDR as documentation

c. I use the racking function in the symbol display

d. I show a playback of my past voyage track on the charts

How do you get information on an ENC object (Buoy – Beacon – Berth etc.) on the FURUNO

ECDIS?

- I right click on the User Chart function in the route planning tool.

- I click on the Chart Info in the Instant Access Bar.

- I center click on the object.

- I right click on the object.

How do you delete a specific object added using the Manual Update function?

- I select Clear in the Manual Update window

- I use the Delete function in the File Export tool

- I right click on the object and use the Manual Update window to delete it

- I set the View Until date for the Manual Update two months back in time.

How do you switch the Kalman filter on or off

- The kalman filter is always switched on when a route is put into monitor mode and
 switched off where route being monitored

- The kalman filter is always on so I never have to switch it on or off

- The kalman filter is switched on or off in the Sensor menu on the Position tab

- The Kalman filter is switched on when steering is switched to Autopilot

How do you record Own Ship’s position on the ECDIS charts when you have a Range/Bearing

observation from your RADAR?

a. I cannot record own ship’s position manually on the FURUNO ECDIS

b. I record LOP in the Record function of the Event Log.

c. I press the [CTRL] & [ACQ/ACT] button on the Control Unit

d. I select [Record][Event Log] and [User Event] from the Instant Access bar and insert the

observation Record User Event window.

How do you modify an existing Manual Update object?

a. I use the ENC tab of the chart Maintenance function

b. I use the Mariner tab of the Symbol Display function

c. I cannot modify a Manual Update – only delete it

d. I use the List tab of Manual Update tool function

How do you save your route to the- Hard Disc Drive when it has been edited?

a. I don’t. The route is automatically saved to the hard disc drive whenever changes are

applied

b. I click on Save or Save As in the Route Planning tool.

c. I select Save in the Backup and Restore dialogue.

d. I click New in the Route Planning tool.

How do you switch from Raster chart to Vector chart on the FURUNO ECDIS?

a. I select ENC in the Main menu

b. I select Vector in the Chart Legend

c. I select Vector chart from the drop down list in the Status Bar

d. I select Vector chart in the Chart Catalogue

How do you manually record Own Ship's current position in the Logs?

a. By opening the Voyage Log and entering the current position

b. By right clicking on own ship icon on the user interface

c. By pressing the Record button on the Control Unit

d. By using the record position event function of the Event Log

How do you hide (not delete) a Manual Update object?

a. I select Clear from the Manual Updates menu.

b. I select Undo Last from the Manual Updates menu.

c. I deselect that general type of chart object in the Chart Display dialogue

d. I deselect the option from the Symbol Display dialogue

How do you change the User Chart being used for monitoring?

a. I move the monitored route plan to planning mode and edit the Linked User Chart setting

b. I select a different user chart from the Menu to monitor

c. I select User Chart from the planning sidebar and then I select Monitor for the desired

user chart

d. I left click on User Chart in the Status Bar and then I select Plan
How do you start the route planning tool?

a. I press Plan on the Control Unit

b. I click on the Route icon in the Status bar

c. I select Route Plan from the Menu dialogue

d. I click on Route in the Quick Access bar

Where do you change the ship Outlines?

a. In the Quick Access bar

b. In Chart Display

c. In symbol Display

d. In the Status Bar

Where do you change the visibility of your Monitored route?

a. In Chart Legend

b. In Symbol Display

c. In Chart Display

d. In Chart Catalogue

Where do you change the visibility of your Circles?

a. In Chart Legend

b. In Symbol Display

c. In Chart Display

d. In Chart Catalogue
Where do you change the Velocity Vectors style?

a. In the Quick Access bar

b. In Chart Display

c. In Symbol Display

d. In the Status Bar

Where do you change the display of Own Ship Past Track and other user overlays?

a. In the Information Sidebar

b. In chart Display

c. In Symbol Display

d. In the Status Bar

Where do you change the Tracked Target size?

a. In the Quick Access bar

b. In Chart Display

c. In Symbol Display

d. In the Status Bar

Where do you change the visibility of your User Chart?

a. In Chart Legend

b. In Symbol Display

c. In Chart Display

d. In Chart Catalogue
Where do you switch between Multicolor and Two color setting for the chart?

a. In Chart Legend

b. In Symbol Display

c. In Basic Setting

d. In Chart Display

Where do you offset own ship chart position on the FURUNO ECDIS?

a. In Symbol Display

b. In Chart Display

c. In Chart Menu

d. In own ship functions box

Where can you find a list of the Manual Updates that have been applied to the Furuno ECDIS?

a. In the Chart Legend

b. In the Manual Update Window

c. In the Chart Catalogue

d. In the Chart Display menu

Where can you find information concerning the charts stored on the HDD?

a. On the Internet

b. The Chief Officer will know

c. In the chart catalogue

d. In the Chart Display menu

Where can you display your planned or monitored User Chart on the FURUNO ECDIS?

a. Only on official charts

b. On all charts

c. Only on vector charts

d. Only on raster charts

How can you tell if you FURUNO ECDIS is displaying an ENC?

- There is an “ENC Data available” indication in the Own Ship Functions Box

- There is an “RNC data” indication in the Own Ship Functions Box.

- The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.

- There is no special indication in the Own Ship Functions Box

How can you verify which route is being monitored?

a. By clicking on “Route” and then on “Route Info” in the Quick Access Sidebar in

Plan mode.

b. The name of the route will be displayed in the Status Bar.

c. By clicking on “Route” and then on “route Info” in the Quick Access Sidebar in

Navi mode.

d. I cannot get information on the route which is being monitored.

How can you verify which route is being monitored?

a. The name of the route will be displayed on my own vector

b. The name of the route will be displayed in the Route Information box

c. By right clicking on own ship icon

d. I cannot get information on the route which is being monitored

How can you see if a chart object is created using Manual Updates?

a. The Manual Update will be larger than any other chart objects

b. It is always shown in red

c. It will have a special orange marker.

d. There is no way I can see if a chart object is created using Manual Updates.

How can you reset the odometer?

a. I can reset the odometer from the Voyage tab of the Menu

b. I can reset the odometer from the Sensor Setting dialogue

c. I can reset the odometer from the Symbol Display dialogue

d. I can reset the odometer from the Quick Access sidebar

How can you verify which User Chart is being monitored?

a. The name of the User Chart will be displayed in the top right corner of the ECDIS screen

b. The name of the User Chart will be displayed in the Information Sidebar

c. By clicking on “Route” and then on “Route Info” in the Quick Access Bar when in

Plan mode

d. By clicking on “Route” and then on “Route Info” in the Quick Access Bar when in

Navi mode

How can you reset the trip counter?

a. I can reset the Trip Counter by resetting the Voyage Log in the Reset submenu of the

Record menu
 b. I can reset the Trip Counter by resetting it in the Voyage tab of the Menu

c. I cannot reset the Trip Counter

d. The Trip Counter can be reset by deleting it using the Backup and Restore dialogue

Which information can you find in the Raster Chart Legend?

- Horizontal datum

- Safety Depth

- User Permit number

- License number

Which information can you find in the Vector Chart Legend?

- T&P Notices

- Name

- Warnings

- Safety Contour setting

Which information can you find in the Vector chart Legend?

- Notices To Mariners

- Presentation Library edition number

- Chart edition & Update date

- Safety contour setting

Which information can you find in the Vector chart Legend?

 - Magnetic Variation

- Base CD number

- Permit expiration date

- Safety Contour setting

Which information can you find in the Raster Chart Legend?

- Magnetic Variation

- Safety Contour setting

- Quality of data

- T&P Notice

Which information can you find in the Raster Chart Legend?

- Edition number

- Last displayed update

- Edition date

- Update issue date

Which information can you find in the Raster Chart Legend?

- Shallow Contour

- Chart Name

- Chart Viewing date

- Deep Contour

Can you create a Manual Update from a Navtex Message shown on the ECDIS?
 - YES – by manually creating the object

- YES – by letting the ECDIS create the object automatically

- YES – either by creating it manually or letting the ECDIS create it automatically

- No

Can you create a Manual update from an AIS Safety Message shown on the ECDIS?

- Yes – by manually creating the object

- Yes – by letting the ECDIS create the object automatically

- Yes – either by creating it manually or letting the ECDIS create it automatically

- No

Can you plan a route while you monitor another route?

a. No

b. Yes but only if I have two ECDIS

c. Yes the route planning function is independent from the route monitoring function

d. Yes but I must select the same Safety Contour for both route plans

Can you move your User Chart from one FURUNO ECDIS to another?

a. No

b. Yes but only by using the harmonization process.

c. Yes by using the Export/Import tool in the Settings function of the Status Bar
 d. Yes but only to an ECDIS with the exact same software version number

Can you open the route planning tool when the ECDIS is in chart mode?

a. Yes If I open the Menu dialogue first.

b. Yes if I right click on the chart and select Event

c. Yes if I select Plan in the Chart Catalogue

d. No

Can you edit a route without removing it from the route monitoring function?

a. No

b. Yes but I must copy it to another ECDIS where it can be edited without interfering with

the monitoring the FURUNO ECDIS

c. Yes if I create a copy of the route plan in ANTS format on a USB edit the file on a normal

office

d. Yes if I select copy from monitor in the Route plan menu and edit the copy. When is

complete select-Exchange with monitor in the Route Plan menu

Can you copy your Manual Updates from one FURUNO ECDIS to another?

a. No

b. Yes – by using the Backup and Restore dialogue to transfer the Manual Updates to a

USB

c. Yes – By sending the Manual updates via an email

d. No – but I can transfer them to another manufacturer’s type of ECDIS

Can you monitor a route even though it indicates an active Alert when you have completed the

Route Plan Check?

a. Yes – the only thing preventing me from monitoring would be an Impossible Turn

message in the WPT

 b. Yes – if I enter the Service Safety Password

c. No

d. It depends on the type of Alert generated (Safety Contour – Restricted Area – Caution

Area etc.)

When do you use a Manual Update?

a. Always when I have to update my charts.

b. When I receive information which must be displayed on my ECDIS and his is not yet

included in the updates.

c. I should never use Manual Updates.

d. When I have to update the software of the ECDIS

Which of these settings generate an alarm from the Chart Alert setting?

a. Shallow Contour

b. Safety Depth

c. Safety Contour

d. Deep contour

Which Manual Update objects can be hidden from view by operator selection?

a. Only the Manual Updates Special Areas (from the Chart Display dialogue)

b. All manual Updates objects(from the Chart Display dialogue)

c. Only the Manual Updates Buoys(from the Chart Display dialogue)

d. Only the Manual Updates Soundings (from the Chart Display dialogue)

Which Operating System is used on the FURUNO ECDIS

a. Linux

b. DOS

c. Window XP
 d. Window 8

Which color scheme is used for a Manual update on the Furuno ECDIS?

a. Blue ENC symbols

b. Standard ENC symbols

c. Orange ENC symbols

d. Red ENC symbols

Where can Manual Updates be displayed?

- Only on ENCs

- Only on RNCs

- Only on Vector charts

- On all types of charts in the ECDIS

What is the maximum limit of the Check Area?

a. No limit

b. 240min. + 20NM + 3km + 999m

c. 120min. + 10NM + 3km + 500m

d. 999min + 999NM + 999km + 999m

What should you do if you have to leave your planned route during a voyage?

a. Switch off the FURUNO ECDIS and concentrate on the RADAR

b. Disable the route monitoring on the FURUNO ECDIS

c. Change the display of the FURUNO ECDIS to IMO All Other

d. Configure and enable the check Area function to assist me in scanning the ENCs for

danger to Navigator hazardous objects.

 If your primary GPS fails – how do you switch to another position sensor in the FURUNO ECDIS?

- I cannot switch to another position sensor – a service technician is required to make the

switch

- The ECDIS will normally switch to the secondary position sensor automatically if such is

connected to ????

- I change the position sensor in the initial Settings submenu.

- I change the position sensor in the Conning Display

If your primary GPS fails - how do you switch to another position sensor in the FURUNO ECDIS?

a. I cannot switch to another position sensor – a service technician is required to make the

switch

b. I change the position sensor in the in the Chart Display dialogue

c. I change the position sensor in the Sensor dialogue of the Menu

d. I change the position sensor in the Conning Display dialogue

What is a Manual Update?

a. A Manual update is an update applied using the Manual function in Load & Update

Charts.

b. A Manual Update is an update to the charts created by the operator from information

received from a Navtex message – a VHF broadcast etc.

c. A Manual update is an update applied to the charts by an official representative of the

chart product

d. A Manual update is a chart created using the digitizer function of the FURUNO ECDIS

Where do you change the Target post position density?

 a. In the Quick Access bar

b. In Chart display

c. In Symbol Display

d. In the status Bar

추가

Where do you select the color Palette used to display the charts?

a. In Chart Legend

b. In Chart Display

c. In Quick Access Bar

d. In Chart Catalogue

What is Kalman Filter in the FURUNO ECDIS?

a. The Kalman Filter is a noise filter which improves the precision of the charts

b. The Kalman filter is a filter which reduces the time it takes for the ECDIS to start up

c. The Kalman Filter is a filter which continuously monitors the status and validity of the

navigation se???

d. The Kalman Filter is a filter which continuously monitors the connection to the RADAR

GPS and AIS

Which setting can be changed in Sensor?

a. Log stabilization mode

 b. Safety contour setting

c. Safety Depth setting

d. Kalman Filter setting

Which setting can be changed in Sensor?

a. Monitored sensors

b. System or Local selection

c. Symbol Display setting

d. Conning Display setting

What is the name of category of charts generated by the user to draw up contingency areas - No

Go areas - clearing lines etc.?

a. Private Chart

b. Pilot Data

c. User Chart

d. Non HO Chart

Where do you control the visibility of the user overlays (User Chart - Route - etc.)?

a. In Chart Legend

b. In Symbol Display

c. In Chart Display

d. In Chart Catalogue

Where do you find information on the C-Map SDK (Software Developers Kit) software version of

the FURUNO ECDIS?

a. In the Voyage Log

b. In the System dialogue of the Menu

c. In the About dialogue

 d. In the S52 Presentation library

Can you set the overall maximum speed for a route plan?

a. Yes in the Ship and Route parameters of the Menu

b. Yes in Chart Display

c. Yes in Optimization parameters

d. Yes in the route planning tool

Where can you update the RNCs on the Furuno ECDIS?

a. In the Update function of the Menu

b. In the Chart Manager (Individual Update)

c. In the Update function of the Chart Catalogue

d. In the Update function of the Chart Legend

What is the purpose of Kalman Filter?

a. The Kalman Filter is the Antivirus software running on the FURUNO ECDIS

b. The filter is used to calculate an astronomical position from several astronomical

observation operator

c. The filter continuously monitors the position given by each individual position sensor to

determine if ?? reliable or not

d. The filter is used to verify the quality of data on the Base and Update CDs

What is a Point in the User Chart?

a. A point is used to create a Manual Update from a chart object

b. A point is used to denote/highlight the position of a chart object with the User Chart.
 c. A point is the end of a User Chart

d. A point is used to connect the User Chart with a route plan

How do you update your raster charts on the Furuno ECDIS using the RNC Update CD?

a. I use the AoutoLoad function

b. I create a Manual Update from the information on the CD

c. I cannot update the raster using an RNC update CD

d. I import the information using the Chart Details function in the Chart Catalogue