2-890-968-51 (1)

AUDIO OUT REAR*

FM/AM
Compact Disc Player
* AUDIO OUT SUB/REAR

Installation/Connections
Instalación/Conexiones
B
⫭塁濊䴾嵓徇㌉ BUS AUDIO IN

BUS CONTROL IN

BUS AUDIO IN

Source selector*
Selector de fuente*
杗㷴応㐫◌*
XA-C40

BUS CONTROL IN

CDX-GT460US
© 2006 Sony Corporation Printed in Taiwan

Cautions Conne
• This unit is designed for negative ground (earth) 12 V  To a m
DC operation only. First con
• Do not get the leads under a screw, or caught in moving yellow a
parts (e.g. seat railing).  To the
• Before making connections, turn the car ignition off to power
avoid short circuits. Notes
  • Connect the yellow and red  power supply leads only • It is no
after all other leads have been connected. anten
manu
• Run all ground (earth) leads to a common • When
ground (earth) point. the re
• Be sure to in sulateanylooseunconnectedleadswith supply
electrical tape for safety.  To AM
Notes on the power supply lead (yellow) amplifi
×2 This con
• When connecting this unit in combination with other system
stereo components, the connected car circuit’s rating
 To the
must be higher than the sum of each component’s fuse.
energ
• When no car circuits are rated high enough, connect ignitio
the unit directly to the battery.
    Notes
• If ther
powe
Parts Iist Be sur
metal
• When
• The numbers in the list are keyed to those in the the re
instructions. supply
×4 • The bracket  and the protection collar  are  To the
attached to the unit before shipping. Before mounting energ
the unit, use the release keys  to remove the bracket Be sure
surface
 and the protection collar  from the unit. For
details, see “Removing the protection collar and the Notes on th
• The powe
bracket ()” on the reverse side of the sheet. DC when
• Keep the release keys  for future use as they • When you
are also necessary if you remove the unit from side glass
your car. (blue) or t
Equipment used in illustrations (not supplied) terminal o
Caution consult yo
Equipo utilizado en las ilustraciones (no suministrado) Handle the bracket  carefully to avoid injuring your • A power a
with this u
㌶♺ᶑ䗨塁仒濃曂斨彥濄 fi ngers.
Memory ho
When the ye
always be su
 switch is tur
Front speaker Power amplifi er Notes on sp
Altavoz frontal Amplifi cador de potencia • Before co
• Use speak
↱㌾俖◌ ∃䋫㒢⢋◌ adequate
 • Do not co
Catch connect th
left speak
Note • Do not co
Before installing, make sure that the catches on both sides of negative (
the bracket  are bent inwards 2 mm ( 3/32 in). If the catches are • Do not att
Rear speaker CD/MD changer straight or bent outwards, the unit will not be installed securely • Connect o
and may spring out. (with built-
Altavoz posterior Cambiador de CD/MD the unit.
⻰㌾俖◌ DE0NE!㌿䠃㧃 • To avoid a
installed in
Connection example lead for th
• Do not co
Note on con
Notes (-A)
If speaker a
• Be sure to connect the ground (earth) lead before connecting
appears in t
the amplifier.
Active subwoofer • The alarm will only sound if the built-in amplifier is used.
amplifier are
Altavoz potenciador de
Tip (-B- )
graves activo For connecting two or more CD/MD changers, the source
㙭㷴峩Ẳ杗㌾俖◌ selector XA-C40 (not supplied) is necessary.