TABLE OF CONTENTS

HOW TO USE THIS DOCUMENT ..........................................................................................................1

TERMS AND DEFINITIONS ...................................................................................................................1
QUESTIONS ..........................................................................................................................................5
NEWTON’S LAWS .............................................................................................................................5
VERTICAL MOTION ........................................................................................................................11
MOMENTUM AND IMPULSE...........................................................................................................19
WORK, ENERGY AND POWER ......................................................................................................25
DOPPLER EFFECT .........................................................................................................................33
ELECTROSTATICS .........................................................................................................................40
ELECTRIC CIRCUITS .....................................................................................................................49
ELECTRICAL MACHINES ...............................................................................................................61
OPTICAL PHENOMENA AND PROPERTIES OF MATERIALS .......................................................68
NUMERICAL ANSWERS .....................................................................................................................77
NEWTON’S LAWS ...........................................................................................................................77
VERTICAL MOTION ........................................................................................................................77
MOMENTUM AND IMPULSE...........................................................................................................77
WORK, ENERGY AND POWER ......................................................................................................77
DOPPLER EFFECT .........................................................................................................................78
ELECTROSTATICS .........................................................................................................................78
ELECTRIC CIRCUITS .....................................................................................................................78
ELECTRICAL MACHINES ...............................................................................................................78
OPTICAL PHENOMENA AND PROPERTIES OF MATERIALS .......................................................79

CREDITS
The following question papers were used to compile this book:
Department of Basic Education, National Senior Certificate
Physical Sciences Question Papers, 2014 – 2022, Pretoria

Terms, definitions, questions & answers

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

HOW TO USE THIS DOCUMENT

Dear grade 12 Learner

1. This document was compiled as an extra resource to help you to perform well in physical
sciences.

2. Firstly, you must make sure that you study the terms and definitions provided for each topic.
Theory always forms part of any test or examination, and you should ensure that you obtain full
marks for ALL theory questions. Always be prepared to write a test on terms and definitions as
soon as a topic is completed in class. Frequently revise terms and definitions of topics already
completed so that you know them by the time you are sitting for a test or an examination.

3. Answer all the questions on a certain topic in your homework book as soon as the topic is
completed. Numerical answers are given at the back of this book. Use them to guide you about
the correctness of your answers. If you differ from a given answer, you may want to check the
correctness of your answer. In the case of vectors, only the magnitude of the answer is given.
Interpret the direction in terms of your choice of direction. A separate book with fully worked out
answers is available. Your teacher will decide when he/she will hand out that specific booklet.

4. If you have the answer book, DO NOT look at the answers before attempting the questions. First
try it yourself. Compare your answers with the given answers. Mark your work with a pencil and
do corrections for your incorrect answers. If you do not know how to answer a question, the
answers are there to guide you. Acquaint yourself with the way in which a particular type of
question should be answered. Answers supplied are from memoranda used to mark the
questions in previous years.

5. Your teacher can, for example, give you two of the questions in this document as homework. The
following day he/she will just check whether you answered them and whether you marked your
answers. The teacher will only discuss those questions in which you do not understand the
answers supplied in the document. Therefore, a lot of time will be saved, depending on when you
receive the answer booklet.

6. The answers are meant to help you to prepare for your tests and examinations. If you choose to
copy answers into your homework book without trying them out yourself, you will be the losing the
developmental aspect of trying to solve problems yourself!

7. Work through all the questions and answers of a particular topic before you sit for an examination,
even if you answered the questions before.

8. Any additional resource is only of help when used correctly. Ensure that you make use of all help
provided in the correct way to enable you to be successful. All the best and may you perform very
well in physical sciences.

Terms, definitions, questions & answers

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

TERMS AND DEFINITIONS

MECHANICS: NEWTON’S LAWS

Acceleration The rate of change of velocity.
Free-body diagrams This is a diagram that shows the relative magnitudes and directions of forces acting
on a body/particle that has been isolated from its surroundings.
Kinetic frictional force The force acting parallel to a surface and opposes the motion of a MOVING object
(fk) relative to the surface.
Mass The amount of matter in a body measured in kilogram (kg).
Maximum static max
The static frictional force is a maximum (f s ) just before the object starts to move
max
frictional force (f s ) across the surface.
Newton's first law of A body will remain in its state of rest or motion at constant velocity unless a non-zero
motion resultant/net force acts on it.
Inertia The resistance of a body to a change in its state of rest or uniform motion in a straight
line.
Mass is a measure of an object’s inertia.
Newton's second law When a resultant/net force acts on an object, the object will accelerate in the direction
of motion of the force at an acceleration directly proportional to the force and inversely
proportional to the mass of the object.
In symbols: Fnet = ma
Newton’s third law of When object A exerts a force on object B, object B SIMULTANEOUSLY exerts a
motion force equal in magnitude but opposite in direction on object A.
Newton's law of Each body in the universe attracts every other body with a force that is directly
universal gravitation proportional to the product of their masses and inversely proportional to the square of
the distance between their centres.
In symbols: F = Gm1m 2
2
r
Normal force The force or the component of a force which a surface exerts on an object with which
it is in contact, and which is perpendicular to the surface.
Static frictional force The force acting parallel to a surface and opposes the tendency of motion of a
(fs) STATIONARY object relative to the surface.
Weight The gravitational force, in newton (N), exerted on an object.
Weightlessness The sensation experienced when all contact forces are removed i.e. no external
objects touch one's body.

MECHANICS: MOMENTUM AND IMPULSE

Contact forces Contact forces arise from the physical contact between two objects (e.g. a soccer
player kicking a ball.)
Non-contact forces Non-contact forces arise even if two objects do not touch each other (e.g. the force of
attraction of the earth on a parachutist even when the earth is not in direct contact
with the parachutist.)
Momentum Linear momentum is the product of an object’s mass and its velocity.
In symbols: p = mv Unit: N∙s or kg∙m∙s-1
Newton’s Second Law The net (or resultant) force acting on an object is equal to the rate of change of
of motion in terms of momentum of the object in the direction of the net force.
momentum Δp
In symbols: Fnet =
Δt
Principle of The total linear momentum in an isolated system remains constant (is conserved).
conservation of linear In symbols: p before = p after
momentum
Closed system A system in which the net external force acting on the system is zero.
Impulse The product of the resultant/net force acting on an object and the time the
resultant/net force acts on the object.
In symbols: Impulse = FnetΔt Unit: N∙s or kg∙m∙s-1
Impulse-momentum In symbols: FnetΔt = mΔv = m(vf – vi) Unit: N∙s or kg∙m∙s-1
theorem
Elastic collision A collision in which both total momentum and total kinetic energy are conserved.
Inelastic collision A collision during which kinetic energy is not conserved.

Terms, definitions, questions & answers 1

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

MECHANICS: VERTICAL PROJECTILE MOTION

1-D motion One-dimensional motion./Linear motion./Motion in one line.
Acceleration The rate of change of velocity.
Symbol: a
Unit: meters per second squared (m∙s-2)
Gravitational The acceleration of a body due to the force of attraction of the earth.
acceleration (g)
Displacement Change in position.
Symbol: ∆x (horizontal displacement) or ∆y (vertical displacement)
Unit: meters (m)
Free fall Motion of an objects under the influence of the gravitational force only.
Gravitational force A force of attraction of one body on another due to their masses.
Position Where an object is relative to a reference point.
Symbol: x (horizontal position) or y (vertical position)
Unit: meters (m)
Projectile An object which has been given an intial velocity and on which the only force acting is
the gravitational force/weight.
Velocity The rate of change of position.
Symbol: v Unit: meters per second (m∙s-1)
MECHANICS: WORK, ENERGY AND POWER
Work Work done on an object by a constant force is the product of the magnitude of the
force, the magnitude of the displacement and the angle between the force and the
displacement.
In symbols: W = F x cos 
Positive work The kinetic energy of the object increases.
Negative work The kinetic energy of the object decreases.
Work-energy theorem The net/total work done on an object is equal to the change in the object's kinetic
energy OR the work done on an object by a resultant/net force is equal to the change
in the object's kinetic energy.
In symbols: Wnet = Δ K = Kf - Ki.
Principle of The total mechanical energy (sum of gravitational potential energy and kinetic energy)
conservation of in an isolated system remains constant. (A system is isolated when the resultant/net
mechanical energy external force acting on the system is zero.)
In symbols: EM(intial) = EM(final) OR (Ep + Ek)initial = (Ep + Ek)final
Conservative force A force for which the work done (in moving an object between two points) is
independent of the path taken.
Examples are gravitational force, the elastic force in a spring and electrostatic forces
(coulomb forces).
Non-conservative force A force for which the work done (in moving an object between two points) depends on
the path taken.
Examples are frictional force, air resistance, tension in a chord, etc.
Power The rate at which work is done or energy is expended.
W
In symbols: P =
t
Unit: watt (W)
WAVES, SOUND AND LIGHT: DOPPLER EFFECT
Doppler Effect The apparent change in frequency/pitch of the sound detected by a listener because
the sound source and the listener have different velocities relative to the medium of
sound propagation.
OR: The change in frequency/pitch of the sound detected by a listener due to relative
motion between the sound source and the listener.
Red shift Observed when light from an object increased in wavelength (decrease in frequency).
A red shift occurs when a light source moves away from an observer.
Blue shift Observed when light from an object decreased in wavelength (increase in frequency).
A blue shift occurs when a light source moves towards an observer.
Frequency The number of vibrations per second.
Symbol: f Unit: hertz (Hz) or per second (s-1)
Wavelength The distance between two successive points in phase.
Symbol: λ Unit: meter (m)
Wave equation Speed = frequency x wavelength

Terms, definitions, questions & answers 2

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

ELECTRICITY AND MAGNETISM: ELECTROSTATICS

Coulomb's law The magnitude of the electrostatic force exerted by one point charge on another point
charge is directly proportional to the product of the magnitudes of the charges and
inversely proportional to the square of the distance between them.
In symbols: F = kQ1Q2
r2
Electric field A region of space in which an electric charge experiences a force.
Electric field at a point The electric field at a point is the electrostatic force experienced per unit positive
charge placed at that point.
In symbols: E = F Unit: N∙C-1
q
Direction of electric The direction of the electric field at a point is the direction that a positive test charge
field would move if placed at that point.
ELECTRICITY AND MAGNETISM: ELECTRIC CIRCUITS
Ohm's law The potential difference across a conductor is directly proportional to the current in the
conductor at constant temperature.
In symbols: R = V
I
Ohmic conductors A conductor that obeys Ohm’s law i.e the ratio of potential difference to current remains
constant. (Resistance of the conducter remains constant.)
Non-ohmic conductors A conductor that does not obey Ohm’s law i.e the ratio of potential difference to current
does NOT remain constant. (Resistance of the conductor increases as the current
increases e.g. a bulb.)
Power Rate at which work is done.
In symbols: P = W Unit: watt (W)
t
2
Other formulae: P = VI; P = I2R; P= V
R
kilowatt hour (kWh) The use of 1 kilowatt of electricity for 1 hour.
Internal resistance The resistance within a battery that causes a drop in the potential difference of the
battery when there is a current in the circuit.
emf Maximum energy provided/work done by a battery per coulomb/unit charge passing
through it.
(It is the potential difference across the ends of a battery when there is NO current in
the circuit.)

Terminal potential The energy transferred to or the work done per coulomb of charge passing through
difference the battery when the battery delivers a current.
(It is the potential difference across the ends of a battery when there is a current in
the circuit.)
ELECTRICITY AND MAGNETISM: ELECTRICAL MACHINES
Generator A device that transfers mechanical energy into electrical energy.
Faraday’s law of The magnitude of the induced emf across the ends of a conductor is directly
electromagnetic proportional to the rate of change in the magnetic flux linkage with the conductor.
induction (When a conductor is moved in magnetic field, a potential difference is induced across
the conductor.)

Fleming’s Right Hand Hold the thumb, forefinger and second finger of the RIGHT hand at right angles to each
Rule for generators other. If the forefinger points in the direction of the magnetic field (N to S) and the thumb
points in the direction of the force (movement), then the second finger points in the
direction of the induced current.

Electric motor A device that transfers electrical energy into mechanical energy.
Fleming’s Left Hand Hold the thumb, forefinger and second finger of the LEFT hand at right angles to each
Rule for electric motors other. If the forefinger points in the direction of the magnetic field (N to S) and the
second finger points in the direction of the conventional current, then the thumb will
point in the direction of the force (movement).
Coventional current Flow of electric charge from positive to negative.
AC Alternating current
The direction of the current changes each half cycle.

Terms, definitions, questions & answers 3

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

DC Direct current
The direction of the current remains constant. (The direction of conventional current is
from the positive to the negative pole of a battery. The direction of electron current is
from the negative to the positive pole of the battery.)
Root-mean-square The root-mean-square potential difference is the AC potential difference that
potential difference produces the same amount of electrical energy (power) as an equivalent DC potential
(Vrms) difference.
Peak potential The maximum potential difference value reached by the alternating current as it
difference (Vmax) fluctuates i.e. the peak of the sine wave representing an AC potential difference.
Root-mean-square Root-mean-square current is the alternating current that produces the same amount
current (Irms) of energy (power) as and equivalent DC current.
Peak current (Imax) The maximum current value reached by the alternating current as it fluctuates i.e. the
peak of the sine wave representing an AC current.
MATTER AND MATERIALS: OPTICAL PHENOMENA AND PROPERTIES OF MATERIALS
Photo-electric effect The process whereby electrons are ejected from a metal surface when light of suitable
frequency is incident on /shines on the surface.
Threshold frequency The minimum frequency of light needed to emit electrons from a certain metal surface.
(fo)
Work function The minimum energy that an electron in the metal needs to be emitted from the metal
(Wo) surface.
Photo-electric equation E =Wo+ Kmax, where E = hf and Wo= hfo and Kmax = ½mv2max

Atomic absorption Formed when certain frequencies of electromagnetic radiation that passes through a
spectrum medium, e.g. a cold gas, is absorbed.
Atomic emission Formed when certain frequencies of electromagnetic radiation are emitted due to an
spectrum atom's electrons making a transition from a high-energy state to a lower energy state.

Terms, definitions, questions & answers 4

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTIONS

NEWTON’S LAWS
250 N
QUESTION 1 •
Two blocks of masses 20 kg and 5 kg respectively are connected by a T2 Q
light inextensible string, P. A second light inextensible string, Q, attached
to the 5 kg block, runs over a light frictionless pulley.
5 kg
A constant horizontal force of 250 N pulls the second string as shown in
the diagram below. The magnitudes of the tensions in P and Q are T1
and T2 respectively. Ignore the effects of air friction. T1 P
1.1 State Newton's second law of motion in words. (2)
1.2 Draw a labelled free-body diagram indicating ALL the forces
20 kg
acting on the 5 kg block. (3)
1.3 Calculate the magnitude of the tension T1 in string P. (6)
1.4 When the 250 N force is replaced by a sharp pull on the string, one
of the two strings break. Which ONE of the two strings, P or Q, will break? (1)
[12]
QUESTION 2
A block of mass 1 kg is connected to another
40 N block of mass 4 kg by a light inextensible string.
The at 30° to the horizontal, by means of a
constant 40 N force parallel to the plane as
1 kg shown in the diagram below.
The magnitude of the kinetic frictional force
4 kg between the surface and the 4 kg block is 10 N.
The coefficient of kinetic friction between the 1 kg
30° block and the surface is 0,29.

2.1 State Newton's third law of motion in words. (2)

2.2 Draw a labelled free-body diagram showing ALL the forces acting on the 1 kg block as it moves up the
incline. (5)
2.3 Calculate the magnitude of the:
2.3.1 Kinetic frictional force between the 1 kg block and the surface (3)
2.3.2 Tension in the string connecting the two blocks (6)
[16]
QUESTION 3
A 5 kg block, resting on a rough horizontal 60 N
table, is connected by a light inextensible string 10° 5 kg
passing over a light frictionless pulley to
another block of mass 2 kg. The 2 kg block
hangs vertically as shown in the diagram
below. 2 kg
A force of 60 N is applied to the 5 kg block at
an angle of 10o to the horizontal, causing the
block to accelerate to the left. The coefficient of
kinetic friction between the 5 kg block and the surface of the table is 0,5. Ignore the effects of air friction.

3.1 Draw a labelled free-body diagram showing ALL the forces acting on the 5 kg block. (5)
3.2 Calculate the magnitude of the:
3.2.1 Vertical component of the 60 N force (2)
3.2.2 Horizontal component of the 60 N force (2)
3.3 State Newton's Second Law of Motion in words. (2)
Calculate the magnitude of the:
3.4 Normal force acting on the 5 kg block (2)
3.5 Tension in the string connecting the two blocks (7)
[20]

Terms, definitions, questions & answers 5

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 4
4.1 Two blocks of mass M kg and 2,5 kg M
respectively are connected by a light, table
inextensible string. The string runs over a light,
frictionless pulley, as shown in the diagram 2,5 kg
below. The blocks are stationary.
4.1.1 State Newton's THIRD law of
motion in words. (2)
4.1.2 Calculate the tension in the string. (3)
The coefficient of static friction (μs) between the unknown mass M and the surface of the table is 0,2.
4.1.3 Calculate the minimum value of M that will prevent the blocks from moving. (5)
The block of unknown mass M is now replaced with a block of mass 5 kg. The 2,5 kg block now
accelerates downwards. The coefficient of kinetic friction (µk) between the 5 kg block and the surface of
the table is 0,15.
4.1.4 Calculate the magnitude of the acceleration of the 5 kg block. (5)
4.2 A small hypothetical planet X has a mass of 6,5 x 1020 kg and a radius of 550 km.
Calculate the gravitational force (weight) that planet X exerts on a 90 kg rock on this planet's surface. (4)
[19]
QUESTION 5
5.1 A 5 kg mass and a 20 kg mass are connected by a 5 kg
light inextensible string which passes over a light
frictionless pulley. Initially, the 5 kg mass is held
stationary on a horizontal surface, while the 20 kg mass
hangs vertically downwards, 6 m above the ground, as
shown in the diagram, not drawn to scale. When the 20 kg
stationary 5 kg mass is released, the two masses begin to
move. The coefficient of kinetic friction, μk, between the 5
kg mass and the horizontal surface is 0,4. Ignore the
effects of air friction. 6m
5.1.1 Calculate the acceleration of the 20 kg
mass. (5)
5.1.2 Calculate the speed of the 20 kg mass as it strikes the ground. (4)
5.1.3 At what minimum distance from the pulley should the 5 kg mass be placed initially, so that the
20 kg mass just strikes the ground? (1)
5.2 A person of mass 60 kg climbs to the top of a mountain
which is 6 000 m above ground level.
5.2.1 State Newton's Law of Universal Gravitation
in words. (2)
6 000 m 5.2.2 Calculate the difference in the weight of the climber
at the top of the mountain and at ground level. (6)
Ground level [18]

QUESTION 6
The diagram below shows a 10 kg block lying on a flat, 10 kg
rough, horizontal surface of a table. The block is
connected by a light, inextensible string to a 2 kg block 2 kg
hanging over the side of the table. The string runs over a table surface
light, frictionless pulley. The blocks are stationary.
6.1 State Newton's FIRST law of motion in words. (2)
6.2 Write down the magnitude of the NET force
acting on the 10 kg block. (1)
When a 15 N force is applied vertically downwards on the 2 kg block, the 10 kg block accelerates to the right
at 1,2 m∙s-2.
6.3 Draw a free-body diagram for the 2 kg block when the 15 N force is applied to it. (3)
6.4 Calculate the coefficient of kinetic friction between the 10 kg block and the surface of the table. (7)
6.5 How does the value, calculated in QUESTION 6.4, compare with the value of the coefficient of
STATIC friction for the 10 kg block and the table? Write down only LARGER THAN, SMALLER
THAN or EQUAL TO. (1)
6.6 If the 10 kg block had a larger surface area in contact with the surface of the table, how would this
affect the coefficient of kinetic friction calculated in QUESTION 6.4? Assume that the rest of the
system remains unchanged. Write down only INCREASES, DECREASES or REMAINS THE SAME.
Give a reason for the answer. (2)
[16]

Terms, definitions, questions & answers 6

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 7 25 N
A learner constructs a push toy using two blocks with masses
1,5 kg and 3 kg respectively. The blocks are connected by a
massless, inextensible cord. The learner then applies a force of 30°
25 N at an angle of 30° to the 1,5 kg block by means of a light
rigid rod, causing the toy to move across a flat, rough, horizontal 3 kg 1,5 kg
surface, as shown in the diagram.
The coefficient of kinetic friction (µk) between the surface and each block is 0,15.
7.1 State Newton's Second Law of Motion in words. (2)
7.2 Calculate the magnitude of the kinetic frictional force acting on the 3 kg block. (3)
7.3 Draw a labelled free-body diagram showing ALL the forces acting on the 1,5 kg block. (5)
7.4 Calculate the magnitude of the:
7.4.1 Kinetic frictional force acting on the 1,5 kg block (3)
7.4.2 Tension in the cord connecting the two blocks (5)
[18]
QUESTION 8
8.1 A crate of mass 2 kg is being pulled to the right across a rough
horizontal surface by constant force F. The force F is applied
at an angle of 20° to the horizontal, as shown in the diagram.
8.1.1 Draw a labelled free-body diagram showing ALL the
forces acting on the crate. (4)
A constant frictional force of 3 N acts between the surface and the crate. The coefficient of kinetic
friction between the crate and the surface is 0,2. Calculate the magnitude of the:
8.1.2 Normal force acting on the crate (3)
8.1.3 Force F (4)
8.1.4 Acceleration of the crate (3)
8.2 A massive rock from outer space is moving towards the Earth.
8.2.1 State Newton's Law of Universal Gravitation in words. (2)
8.2.2 How does the magnitude of the gravitational force exerted by the Earth on the rock change as
the distance between the rock and the Earth becomes smaller? Choose from INCREASES,
DECREASES or REMAINS THE SAME. Give a reason for the answer. (2)
[18]
QUESTION 9
1,5 ms-1
A small object of mass 2 kg is sliding at a constant 2 kg
velocity of 1,5 ms-1 down a rough plane inclined at 7°
to the horizontal surface. At the bottom of the plane, Horizontal surface 7°
the object continues sliding onto a rough horizontal
surface and eventually comes to a stop. The
coefficient of kinetic friction between the object and both the inclined and the horizontal surfaces is the same.
9.1 Write down the magnitude of the net force acting on the object. (1)
9.2 Draw a labelled free-body diagram for the object while it is on the inclined plane. (3)
9.3 Calculate the:
9.3.1 Magnitude of the frictional force acting on the object while it is sliding down the inclined plane (3)
9.3.2 Coefficient of kinetic friction between the object and the surfaces (3)
9.3.3 Distance the object travels on the horizontal surface before it comes to a stop (5)
[15]
QUESTION 10
10.1 An 8 kg block, P, is being pulled by constant force F up a
rough inclined plane at an angle of 30° to the horizontal, at
CONSTANT SPEED. Force F is parallel to the inclined
plane, as shown in the diagram.
10.1.1 State Newton's First Law in words. (2)
10.1.2 Draw a labelled free-body diagram for block P. (4)
The kinetic frictional force between the block and the surface of the inclined plane is 20,37 N.
10.1.3 Calculate the magnitude of force F. (5)
Force F is now removed and the block ACCELERATES down the plane. The kinetic frictional force
remains 20,37 N.
10.1.4 Calculate the magnitude of the acceleration of the block. (4)
10.2 A 200 kg rock lies on the surface of a planet. The acceleration due to gravity on the surface of the
planet is 6,0 m·s-2.
10.2.1 State Newton's Law of Universal Gravitation in words. (2)
10.2.2 Calculate the mass of the planet if its radius is 700 km. (4)
[21]

Terms, definitions, questions & answers 7

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 11
Two boxes, P and Q, resting on a rough
horizontal surface, are connected by a light
inextensible string. The boxes have masses 5 kg
and 2 kg respectively. A constant force F, acting
at an angle of 30° to the horizontal, is applied to
the 5 kg box, as shown. The two boxes now
move to the right at a constant speed of 2 m∙s-1.
11.1 State Newton's First Law of Motion in words. (2)
11.2 Draw a labelled free-body diagram for box Q. (4)
Box P experiences a constant frictional force of 5 N and box Q a
constant frictional force of 3 N.
11.3 Calculate the magnitude of force F. (6)
The string connecting P and Q suddenly breaks after 3 s while
force F is still being applied. Learners draw the velocity-time
graph for the motion of P and Q before and after the string
breaks, as shown alongside.
11.4 Write down the time at which the string breaks.
11.5 Which portion (X, Y or Z) of the graph represents the
motion of box Q, after the string breaks? Use the
information in the graph to fully support the answer. (4)
[17]
QUESTION 12
Block P, of unknown mass, is placed on a rough horizontal surface. It is connected to a second block of mass 3 kg,
by a light inextensible string passing over a light, frictionless
pulley, as shown. Initially the system of masses is held
stationary with the 3 kg block, 0,5 m above the ground.
When the system is released the 3 kg block moves vertically
downwards and strikes the ground after 3 s. Ignore the
effects of air resistance.
12.1 Define the term acceleration in words. (2)
12.2 Calculate the magnitude of the
acceleration of the 3 kg block using equations
of motion. (3)
12.3 Calculate the magnitude of the tension in the
string. (3)
The magnitude of the kinetic frictional force
experienced by block P is 27 N.
12.4 Draw a labelled free-body diagram for block P. (4)
12.5 Calculate the mass of block P. (3)
[15]
QUESTION 13
A block, of mass 8 kg, is placed on a rough horizontal
surface. The 8 kg block, which is connected to a 2 kg
block by means of a light inextensible string passing over
a light frictionless pulley, starts sliding from point A, as
shown.
13.1 State Newton's Second Law in words. (2)
13.2 Draw a labelled free-body diagram for the
8 kg block. (4)
13.3 When the 8 kg block reaches point B, the
angle between the string and the horizontal is
15° and the acceleration of the system is 1,32 m·s-2.
13.3.1 Give a reason why the system is NOT in equilibrium. (1)
13.3.2 Use the 2 kg mass to calculate the tension in the string. (3)
13.3.3 Calculate the kinetic frictional force between the 8 kg block and the horizontal surface. (4)
13.4 As the 8 kg block moves from B to C, the kinetic frictional force between the 8 kg block and the
horizontal surface is not constant. Give a reason for this statement. (1)
The horizontal surface on which the 8 kg block is moving, is replaced by another horizontal surface made from
a different material.
13.5 Will the kinetic frictional force, calculated in QUESTION 13.3.3 above, change? Choose from: YES or
NO. Give a reason for the answer. (2)
[17]

Terms, definitions, questions & answers 8

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 14
14.1 A person pushes a lawn mower of mass 15 kg at
a constant speed in a straight line over a flat
grass surface with a force of 90 N. The force is
directed along the handle of the lawn mower.
The handle has been set at an angle of 40° to the
horizontal. Refer to the diagram.
14.1.1 Draw a labelled free-body diagram for
the lawn mower. (4)
14.1.2 Why is it CORRECT to say that the
moving lawn mower is in equilibrium? (1)
14.1.3 Calculate the magnitude of the frictional
force acting between the lawn mower
and the grass. (3)
The lawn mower is now brought to a stop.
14.1.4 Calculate the magnitude of the constant force that must be applied through the handle in order
to accelerate the lawn mower from rest to 2 m∙s-1 in a time of 3 s. Assume that the frictional
force between the lawn mower and grass remains the same as in QUESTION 14.1.3. (6)
14.2 Planet Y has a radius of 6 x 105 m. A 10 kg mass weighs 20 N on the surface of planet Y.
Calculate the mass of planet Y. (4)
[18]
QUESTION 15
Block P, of mass 2 kg, is connected to block Q, of mass 3 kg, by a light inextensible string. Both blocks are on
a plane inclined at an angle of 30° to the horizontal. Block Q is pulled by a constant force of 40 N at an angle
of 25° to the incline.
Block P moves on a rough section, AB, of
the incline, while block Q moves on a
frictionless section, BC, of the incline.
See diagram.

An average constant frictional force of 2,5 N acts

on block P as it moves from A to B up
the incline.

15.1 State Newton's Second Law in words.(2)

15.2 Draw a labelled free-body diagram for
block P. (4)
15.3 Calculate the magnitude of the
acceleration of block P while block P
is moving on section AB. (8)
15.4 If block P has now passed point B, how will its acceleration compare to that calculated in
QUESTION 15.3? Choose from GREATER THAN, SMALLER THAN or EQUAL TO.
Give a reason for the answer. (2)
[16]
QUESTION 16
A 20 kg block, resting on a rough horizontal surface, is connected to
blocks P and Q by a light inextensible string moving over
a frictionless pulley. Blocks P and Q are glued together and have a
combined mass of m. A force of 35 N is now applied to the 20 kg
block at an angle of 40° with the horizontal, as shown. The 20 kg
block experiences a frictional force of magnitude 5 N as it moves to
the RIGHT at a CONSTANT SPEED.
16.1 Define the term normal force. (2)
16.2 Draw a labelled free-body diagram of the 20 kg block. (5)
16.3 Calculate the combined mass m of the two blocks. (5)
16.4 At a certain stage of the motion, block Q breaks off and falls
down. How will EACH of the following be affected when this
happens?
16.4.1 The tension in the string. Choose from INCREASES, DECREASES or REMAINS
THE SAME. (1)
16.4.2 The velocity of the 20 kg block. Explain the answer. (3)
[16]

Terms, definitions, questions & answers 9

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 17

An 8-kg block, on a rough horizontal surface, is connected

to a 2-kg block by a light inextensible string passing over
a frictionless pulley, as shown. The 8-kg block moves at
a constant speed when pulled by a 29,6 N horizontal
force to the right. The frictional force acting on the 8-kg
block is 10 N.

17.1 State Newton's Second Law of Motion in words. (2)

17.2 Draw a labelled free-body diagram for the 8-kg block. (5)
17.3 Calculate the tension in the string. (3)
The 29,6 N horizontal force is now increased to 50 N.
17.4 Apply Newton's Second Law to EACH block and calculate the:
17.4.1 Magnitude of the acceleration of the 8-kg block (5)
17.4.2 Tension in the string (2)
[17]

QUESTION 18

A 20 kg block is placed on a rough surface inclined at 30° to the

horizontal. A constant force F, acting parallel to the surface, is
applied on the block so that the block moves up the incline at
a CONSTANT VELOCITY of 2 m∙s-2. Refer to the diagram.
A constant kinetic frictional force of 18 N acts on the block.
18.1 State Newton's First Law in words. (2)
18.2 Draw a labelled free-body diagram for the block. (4)
18.3 Calculate the magnitude of force F. (4)

Force F is removed when the block reaches point X on the

surface. The block continues to move up the surface and comes to rest momentarily at point Y. Assume that the
kinetic frictional force acting on the block remains at 18 N as it moves from point X to point Y.
18.4 Write down the net force acting on the block as it moves from X to Y. (2)
18.5 Calculate the distance between points X and Y. (4)
[16]
QUESTION 19
A man faces difficulty while swimming in a dam. During the
rescue operation, an inflated tube attached to a helicopter by a
rope is dropped from the helicopter.

The man, of mass 70 kg, holds onto the inflated tube of mass
4 kg, while the helicopter is flying horizontally at a CONSTANT
speed. An average frictional force of 300 N is exerted on the
man-tube combination while they are dragged horizontally along
the surface of the water by the helicopter. The rope makes an angle of 50° with the surface of the water,
as shown in the diagram. Assume that the rope is inextensible and massless, and the water of the dam does
not flow.

19.1 State Newton's First Law of Motion in words. (2)

19.2 Draw a free-body diagram of the man-tube combination while they are being dragged. (4)
19.3 Calculate the tension in the rope. (4)
19.4 How will the answer to QUESTION 19.3 change if the helicopter ACCELERATES while dragging the
man? The frictional force and the angle between the rope and the surface of the water remain the
same. Choose from INCREASES, DECREASES or NO CHANGE. Give a reason for the answer. (2)

Terms, definitions, questions & answers 10

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

In another rescue operation, the inflated tube of mass 4 kg is dropped from the
stationary helicopter, and it strikes the water at a speed of 16 m∙s-1. The tube
sinks vertically downwards into the water to a depth of 0,8 m and then rises to
the surface. The rope hangs loosely.

19.5 Calculate the magnitude of the average upward force exerted on the
inflated tube while it is sinking. Assume that the average upward force is constant for the motion. (5)
[17]
QUESTION 20
Crate P of mass 1,25 kg is connected to
another crate, Q, of mass 2 kg by a light
inextensible string. The two crates are
placed on a rough horizontal surface.
A constant force F of magnitude 7,5 N,
acting at angle θ to the horizontal, is
applied on crate Q as shown in the diagram. The crates accelerate at 0,1 m∙s-2 to the right. Crate P experiences
a constant frictional force of 1,8 N and crate Q experiences a constant frictional force of 2,2 N.
20.1 State Newton's Second Law of Motion in words. (2)
20.2 Draw a labelled free-body diagram for crate P. (4)
20.3 Calculate the magnitude of:
20.3.1 The tension in the string (4)
20.3.2 Angle θ (3)
[13]

VERTICAL MOTION
QUESTION 1
A ball, A, is thrown vertically upward from a height, h, with a speed of 15 m∙s -1. AT THE SAME INSTANT, a
second identical ball, B, is dropped from the same height as ball A as shown in the diagram below. Both balls
undergo free fall and eventually hit the ground.
1.1 Explain the term free fall. (2)
1.2 Calculate the time it takes for ball A to return to its starting
point. (4)
15 m∙s-1 B 1.3 Calculate the distance between ball A and ball B when ball A
A is at its maximum height. (7)
1.4 Sketch a velocity-time graph in the ANSWER BOOK for the
motion of ball A from the time it is projected until it hits the
h ground. Clearly show the following on your graph:
• The initial velocity
• The time it takes to reach its maximum height
Ground • The time it takes to return to its starting point (4)
[17]
QUESTION 2
An object is released from rest from a point X, above the ground as shown in
●X the diagram. It travels the last 30 m (BC) in 1,5 s before hitting the ground.
Ignore the effects of air friction.
2.1 Name the type of motion described above. (1)
●B 2.2 Calculate the magnitude of the velocity of the object at point B. (4)
2.3 Calculate the height of point X above the ground. (5)
After hitting the ground, the object bounces once and then comes to rest on the
30 m ground.
2.4 Sketch an acceleration-time graph for the entire motion of the object. (3)
C Ground [17]
●

Terms, definitions, questions & answers 11

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 3
A hot air balloon is rising vertically at a constant velocity. When the hot air balloon reaches
point A a few metres above the ground, a man in the hot air balloon drops a ball which hits the
ground and bounces. Ignore the effects of friction.
The velocity-time graph below represents the motion of the ball from the instant it is dropped
until after it bounces for the first time. The time interval between bounces is ignored. THE A
UPWARD DIRECTION IS TAKEN AS POSITIVE. USE INFORMATION FROM THE GRAPH
TO ANSWER THE QUESTIONS THAT FOLLOW. Ground
3.1 Write down the
v (m∙s )-1
magnitude of the velocity of the hot air
P
balloon. (1)
5,88 3.2 Calculate the height above the ground
2,94 from which the ball was dropped. (3)
3.3 Calculate the time at the point P
0 0,6 3,2 indicated on the graph (2)
2,6 t (s) 3.4 Calculate the maximum height the
- 2,94 ball reaches after the first bounce. (3)
3.5 Calculate the distance between
the ball and hot air balloon when the
ball is at its maximum height after the
first bounce (4)
[13]

-19,60

QUESTION 4
B Ball A is projected vertically upwards at a velocity of 16 m∙s-1 from the
ground. Ignore the effects of air resistance. Use the ground as zero
9 m∙s-1 reference.
4.1 Calculate the time taken by ball A to return to the ground. (4)
4.2 Sketch a velocity-time graph for ball A. Show the
following on the graph:
(a) Initial velocity of ball A
30 m (b) Time taken to reach the highest point of the motion
(c) Time taken to return to the ground (3)
16 m∙s-1
ONE SECOND after ball A is projected upwards, a second
ball, B, is thrown vertically downwards at a velocity of 9 m∙s-1 from
a balcony 30 m above the ground. Refer to the diagram.
4.3 Calculate how high above the ground ball A will be at the
A ground instant the two balls pass each other. (6)
[13]
QUESTION 5
A man throws ball A downwards with a speed of 2 m∙s-1 from the edge of a window, 45 m above a dam of
water. One second later he throws a second ball, ball B, downwards and observes that both balls strike the
surface of the water in the dam at the same time. Ignore air friction.
5.1 Calculate the:
5.1.1 Speed with which ball A hits the surface of the water (3)
5.1.2 Time it takes for ball B to hit the surface of the water (3)
5.1.3 Initial velocity of ball B (5)
5.2 On the same set of axes, sketch a velocity versus time graph for the motion of balls A and B.
Clearly indicate the following on your graph:
• Initial velocities of both balls A and B
• The time of release of ball B
• The time taken by both balls to hit the surface of the water (5)
[16]

Terms, definitions, questions & answers 12

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 6
Ball A is projected vertically upwards from the ground, near a tall building, with a speed of 30 m∙s -1.
Ignore the effects of air friction.
6.1 Explain what is meant by a projectile. (2)
6.2 Calculate the total time that ball A will be in the air. (4)
6.3 Calculate the distance travelled by ball A during the last
B second of its fall. (4)
6.4 TWO SECONDS after ball A is projected upwards, ball B is
projected vertically upwards from the roof of the same building.
The roof the building is 50 m above the ground. Both balls A
50 m and B reach the ground at the same time. Refer to the
diagram. Ignore the effects of air friction.
Calculate the speed at which ball B was projected
30 m∙s -1
upwards from the roof. (4)
A ground 6.5 Sketch velocity-time graphs for the motion of both balls A
and B on the same set of axes. Clearly label the graphs for
balls A and B respectively. Indicate the following on the
graphs:
(a) Time taken by both balls A and B to reach the ground
(b) Time taken by ball A to reach its maximum height (4)
[18]
QUESTION 7
A ball is dropped from the top of a building 20 m high. Ignore the effects of air
resistance.

7.1 Define the term free fall. (4)

7.2 Calculate the speed at which the ball hits the ground. (4)
20 m 7.3 Calculate the time it takes the ball to reach the ground. (3)
7.4 Sketch a velocity-time graph for the motion of the ball (no values
required). (2)
[11]

QUESTION 8
A ball is projected vertically upwards with a speed of 10 m∙s-1 from point A,
which is at the top edge of a building. The ball hits the ground after 3 s. It is
in contact with the ground for 0,2 s and then bounces vertically upwards,
reaching a maximum height of 8 m at point B. See the diagram. Ignore the
effects of friction.
8.1 Why is the ball considered to be in free fall during
its motion? (2)
8.2 Calculate the:
8.2.1 Height of the building (3)
8.2.2 Speed with which the ball hits the ground (3)
8.2.3 Speed with which the ball leaves the ground (3)
8.3 Draw a velocity versus time graph for the complete motion of
the ball from A to B. Show the following on the graph:
• The magnitude of the velocity with which it hits the ground
• The magnitude of the velocity with which it leaves the ground
• The time taken to reach the ground, as well as the time at which it leaves the ground (4)
[15]

Terms, definitions, questions & answers 13

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 9
A hot-air balloon moves vertically downwards at a constant velocity of 1,2 m∙s-1. When it reaches a height of 22 m
from the ground, a ball is dropped from the balloon. Refer to the diagram.

Assume that the dropping of the ball has no effect on the speed of the hot-air
balloon. Ignore air friction for the motion of the ball.

1,2 m·s- 9.1 Explain the term projectile motion. (2)

1 9.2 Is the hot-air balloon in free fall? Give a reason for the answer. (2)
9.3 Calculate the time it takes for the ball to hit the ground after it is dropped. (4)

When the ball lands on the ground, it is in contact with the ground for 0,3 s and
22 m then it bounces vertically upwards with a speed of 15 m∙s-1.

ground 9.4 Calculate how high the balloon is from the ground when the ball reaches its
maximum height after the first bounce. (6)
[14]
QUESTION 10
Stone A is projected vertically upwards at a speed of 12 m∙s-1 from a height h above the ground. Ignore the effects
of air resistance.
10.1 Calculate the time taken for stone A to reach its maximum height. (3)

At the same instant that stone A is projected upwards, stone B is thrown

vertically downwards from the same height at an unknown speed, v. Refer to the diagram.
When stone A reaches its maximum height, the speed of stone B is 3v.

10.2 Calculate the speed, v, with which stone B is thrown downwards. (4)

At the instant stone A passes its initial position on its way down, stone B hits
the ground.

10.3 Calculate the height h. (3)

10.4 Sketch velocity-time graphs for the complete motions of stones A and B
on the same set of axes. Label your graphs for stones A and B clearly.
Show the time taken for stone A to reach its maximum height AND the velocity with
which stone B is thrown downwards on the graphs. (4)
[14]

Terms, definitions, questions & answers 14

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 11
A ball is thrown vertically downwards from the top of a building and bounces a few times as it hits the ground.
The velocity-time graph below describes the motion of the ball from the time it is thrown, up to a certain time T.
Take downwards as the positive direction and the ground as zero reference. The graph is NOT drawn to scale.
The effects of air friction are ignored.

11.1 Write down the speed with which the ball is thrown downwards. (1)
11.2 ALL parts of the graph have the same gradient. Give a reason for this. (2)
11.3 Calculate the height from which the ball is thrown. (3)
11.4 Calculate the time (T) shown on the graph. (4)
11.5 Write down the:
11.5.1 Time that the ball is in contact with the ground at the first bounce (1)
11.5.2 Time at which the ball reaches its maximum height after the first bounce (2)
11.5.3 Value of X (1)
11.6 Is the collision of the ball with the ground elastic or inelastic? Give a reason for the answer using
information in the graph. (2)
[16]
QUESTION 12
In the diagram shown, point A is at the top of a building. Point B is exactly halfway
between the point A and the ground. Ignore air resistance.

12.1 Define the term free fall. (2)

A ball of mass 0,4 kg is dropped from point A. It passes point B after 1 s.

12.2 Calculate the height of point A above the ground. (3)

When the ball strikes the ground it is in contact with the ground for 0,2 s and
then bounces vertically upwards, reaching a maximum height at point B.

12.3 Calculate the magnitude of the velocity of the ball when it strikes the ground. (3)
12.4 Calculate the magnitude of the average net force exerted on the ball while it
is in contact with the ground. (6)
[14]

Terms, definitions, questions & answers 15

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 13
In a competition, participants must attempt to throw a ball vertically
upwards past point T, marked on a tall vertical pole. Point T is 3,7 m
above the ground. Point T may, or may not, be the highest point during
the motion of the ball. One participant throws the ball vertically upwards
at a velocity of 7,5 m·s-1 from a point that is 1,6 m above the ground, as
shown in the diagram. Ignore the effects of air resistance.
13.1 In which direction is the net force acting on the ball while it moves
towards point T? Choose from: UPWARDS or DOWNWARDS.
Give a reason for the answer. (2)
13.2 Calculate the time taken by the ball to reach its highest point. (3)
13.3 Determine, by means of a calculation, whether the ball will pass
point T or not. (6)
13.4 Draw a velocity-time graph for the motion of the ball from the
instant it is thrown upwards until it reaches its highest point.
Indicate the following on the graph:
• The initial velocity and final velocity
• Time taken to reach the highest point (2)
[13]
QUESTION 14
A ball is thrown vertically upwards, with velocity v, from the edge of a roof of a 40 m tall building. The ball takes
1,53 s to reach its maximum height. Ignore air resistance.
14.1 Define the term free fall. (2)
14.2 Calculate the:
14.2.1 Magnitude of the initial velocity v of the ball (3)
14.2.2 Maximum height reached by the ball above the edge of
the roof (3)
14.3 Take the edge of the roof as reference point. Determine the position
of the ball relative to the edge of the roof after 4 s. (3)
14.4 Will any of the answers to QUESTIONS 3.2 and 3.3 change if the height of the
building is 30 m? Choose from YES or NO. Give a reason for the answer. (3)
[14]

QUESTION 15
Stone A is thrown vertically upwards with a speed of 10 m∙s-1 from the
edge of the roof of a 40 m high building, as shown in the diagram.
Ignore the effects of air friction. Take the ground as reference.
15.1 Define the term free fall. (2)
15.2 Calculate the maximum HEIGHT ABOVE THE GROUND
reached by stone A. (4)
15.3 Write down the magnitude and direction of the acceleration
of stone A at this maximum height. (2)

Stone B is dropped from rest from the edge of the roof, x seconds after
stone A was thrown upwards.
15.4 Stone A passes stone B when the two stones are 29,74 m
above the ground. Calculate the value of x. (6)

15.5 The graphs of position versus time for part of the motion of
both stones are shown alongside.

Which of labels a to h on the graphs above represents

EACH of the following?

15.5.1 The time at which stone A has a positive velocity (1)

15.5.2 The maximum height reached by stone A (1)
15.5.3 The time when stone B was dropped (1)
15.5.4 The height at which the stones pass each other (1)
[18]

Terms, definitions, questions & answers 16

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 16
A small ball is dropped from a
height of 2 m and bounces a few
times after landing on a cement
floor. Ignore air friction. The
position-time graph, not drawn to 1,85
scale, represents the motion of
the ball.

16.1 Define the term

free fall. (2)
16.2 Use the graph and
determine:
16.2.1 The time that the
ball is in contact
with the floor
before the first
bounce (2)
16.2.2 The time it takes the ball to reach its maximum height after the first bounce (2)
16.2.3 The speed at which the ball leaves the floor at the first bounce (3)
16.2.4 Time t indicated on the graph (6)
[15]
QUESTION 17
A ball, of mass 0,06 kg, is thrown vertically upwards from the balcony
of a building, 3 m above the ground. The ball reaches a maximum
height h above the ground, as shown in the diagram. Ignore the effects
of air resistance.
17.1 Name the force acting on the ball while it is in free fall. (1)
The velocity-time graph below represents the motion of the ball from
the instant it is thrown upwards until it hits the ground.

17.2 Write down the acceleration of the ball at time t = 1,02 s. (2)
17.3 Consider the areas A1 and A2 shown in the graph above. Write down the numerical value
represented by the DIFFERENCE in areas A1 and A2. (1)
17.4 Calculate the:
17.4.1 Speed at which the ball is thrown upwards (3)
17.4.2 Height h (4)
After hitting the ground, the ball bounces vertically upwards and reaches a new maximum height in 1,1 s.
17.5 Calculate the work done by the ground on the ball while the ball is in contact with the ground. (6)
[17]

Terms, definitions, questions & answers 17

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 18
A hot-air balloon is moving upwards at a CONSTANT UNKNOWN speed.
18.1 Is the hot air balloon in free fall? Choose from YES or NO. Give
a reason for the answer. (2)

When the balloon is 200 m above the ground, a small stone A is dropped from
the balloon. See the diagram. Another small stone B is dropped 5 s later from
the balloon while the balloon is still moving upwards at constant velocity.
Stone A strikes the ground at a speed of 62,68 m∙s-1. Ignore air resistance.
18.2 Calculate the:
18.2.1 Speed of the hot air balloon (3)
18.2.2 Time it takes stone A to strike the ground (3)
18.2.3 Distance between the hot-air balloon and stone B at the
instant when stone A strikes the ground (6)
18.3 On the same set of axes, draw position-time graphs for both the
hot-air balloon and stone A from the moment the stone is dropped
until it strikes the ground. Use the ground as zero reference. Label your
graphs BALLOON and A. (4)
[18]
QUESTION 19
A small disc, C, is thrown vertically upwards at a speed of 15 m∙s-1 from the edge of
the roof of a building of height 30 m. AFTER 0,5 s, a small ball B is shot vertically
upwards from the foot of the building at a speed of 40 m∙s-1 in order to hit disc C.
Ignore the effects of air resistance.
19.1 Explain the term projectile. (2)
19.2 Calculate the:
19.2.1 Time taken by disc C to reach its maximum height (3)
19.2.2 Maximum height above the ground reached by disc C (4)
19.3 Calculate the time from the moment that disc C was thrown upwards
until the time ball B hits the disc. (6)
19.4 On the same set of axes, sketch graphs of velocity versus time for
disk C and ball B from the moment that disc C was thrown upwards
until ball B hits disc C. Label the graph for ball B as B and the graph
for disc C as C. Clearly indicate the following on the graphs:
• The initial velocities of ball B and disc C
• The time at which ball B was shot upward
• The time at which disc C reaches its maximum height
• The time at which ball B hits disc C (5)
[20]
QUESTION 20
A ball is thrown vertically upwards from the top of a building
of height 25 m with a velocity of 12 m∙s-1. On its way down,
the ball passes a door which has a height of 1,9 m and then
strikes the ground, as shown in the diagram. Ignore the
effects of air friction.
20.1 Define the term free fall. (2)
20.2 Calculate the:
20.2.1 Time taken for the ball to reach its
maximum height (3)
20.2.2 Velocity with which the ball strikes the
ground (4)
20.2.3 Time it took the ball to move from the
top of the door to the ground (4)
20.3 Draw a velocity versus time graph for the
motion of the ball from the moment that the
ball is thrown upwards until it strikes the ground. Use the ground as zero reference. Clearly indicate
the following on your graph:
• The velocity with which the ball was thrown upwards
• Time taken by the ball to reach its maximum height
• The velocity with which the ball strikes the ground (3)
[16]

Terms, definitions, questions & answers 18

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

MOMENTUM AND IMPULSE

QUESTION 1
Dancers have to learn many skills, including how to land correctly. A dancer of mass 50 kg leaps into the air and
lands feet first on the ground. She lands on the ground with a velocity of 5 m∙s -1. As she lands, she bends her
knees and comes to a complete stop in 0,2 seconds.
1.1 Calculate the momentum with which the dancer reaches the ground. (3)
1.2 Define the term impulse of a force. (2)
1.3 Calculate the magnitude of the net force acting on the dancer as she lands. (3)
Assume that the dancer performs the same jump as before but lands without bending her knees.
1.4 Will the force now be GREATER THAN, SMALLER THAN or EQUAL TO the force calculated in
QUESTION 1.3? (1)
1.5 Give a reason for the answer to QUESTION 1.4. (3)
[12]
QUESTION 2
Percy, mass 75 kg, rides at 20 m∙s-1 on a quad bike (motorcycle with four wheels) with a mass of 100 kg. He
suddenly applies the brakes when he approaches a red traffic light on a wet and slippery road. The wheels of
the quad bike lock and the bike slides forward in a straight line. The force of friction causes the bike to stop in
8 s.
2.1 Define the concept momentum in words. (2)
2.2 Calculate the change in momentum of Percy and the bike, from the moment the brakes
lock until the bike comes to a stop. (4)
2.3 Calculate the average frictional force exerted by the road on the wheels to stop the bike. (4)
[10]
QUESTION 3
Two stationary steel balls, A and B, are suspended next to each other by massless, inelastic strings as shown
in Diagram 1 below.

Diagram 1 Diagram 2

A
0,2 m
A B B
Ball A of mass 0,2 kg is displaced through a vertical distance of 0,2 m, as shown in Diagram 2 above. When
ball A is released, it collides elastically and head-on with ball B. Ignore the effects of air friction.
3.1 What is meant by an elastic collision? (2)
Immediately after the collision, ball A moves horizontally backwards (to the left). Ball B acquires kinetic energy
of 0,12 J and moves horizontally forward (to the right). Calculate the:
3.2 Kinetic energy of ball A just before it collides with ball B (Use energy principles only.) (3)
3.3 Speed of ball A immediately after the collision (4)
3.4 Magnitude of the impulse on ball A during the collision (5)
[14]
QUESTION 4
A bullet of mass 20 g is fired from a stationary rifle of mass 3 kg. Assume that the bullet moves horizontally.
Immediately after firing, the rifle recoils (moves back) with a velocity of 1,4 m∙s -1.
4.1 Calculate the speed at which the bullet leaves the rifle. (4)
The bullet strikes a stationary 5 kg wooden block fixed to a flat, horizontal table. The bullet is brought
to rest after travelling a distance of 0,4 m into the block. Refer to the diagram below.
before after
20 g
5 kg

4.2 Calculate the magnitude of the average force exerted by the block on the bullet. (5)
4.3 How does the magnitude of the force calculated in QUESTION 3.2 compare to the magnitude
of the force exerted by the bullet on the block? Write down only LARGER THAN, SMALLER THAN or
THE SAME. (1)
[10]

Terms, definitions, questions & answers 19

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 5
The diagram shows two trolleys, P and Q, held together by
means of a compressed spring on a flat, frictionless horizontal P Q
track. The masses of P and Q are 400 g and 600 g respectively.
When the trolleys are released, it takes 0,3 s for the spring to 400 g 600 g
unwind to its natural length. Trolley Q then moves to the right at
4 m∙s-1.
5.1 State the principle of conservation of linear momentum in words. (2)
5.2 Calculate the:
5.2.1 Velocity of trolley P after the trolleys are released (4)
5.2.2 Magnitude of the average force exerted by the spring on trolley Q (4)
5.3 Is this an elastic collision? Only answer YES or NO. (1)
[11]
QUESTION 6
The diagram below shows two sections, XY and YZ, of a horizontal, flat surface. Section XY is smooth, while
section YZ is rough. A 5 kg block, moving with a velocity of 4 m∙s-1 to the right, collides head-on with a stationary
3 kg block. After the collision, the two blocks stick together and move to the right, past point Y. The combined
blocks travel for 0,3 s from point Y before coming to a stop at point Z.
4 m∙s-1 0 m∙s-1
X 5 kg 3 kg Y Z

6.1 State the principle of conservation of linear momentum in words. (2)

6.2 Calculate the magnitude of the:
6.2.1 Velocity of the combined blocks at point Y (4)
6.2.2 Net force acting on the combined blocks when they move through section YZ (4)
[10]
QUESTION 7
The graph below shows how the momentum of car A changes with time just before and just after a head-on
collision with car B. Car A has a mass of 1 500 kg, while the mass of car B is 900 kg. Car B was travelling at a
constant velocity of 15 m∙s-1 west before the collision. Take east as positive and consider the system as
isolated.
MOMENTUM VERSUS TIME GRAPH FOR CAR A

40 000 ─

N
Momentum (kg∙m·s-1)

30 000 ─ E
W

S
20 000 ─

14 000 ─
10 000 ─

0
20 20,1 20,2 20,3 Time (s)

7.1 What do you understand by the term isolated system as used in physics? (1)

Use the information in the graph to answer the following questions.

7.2 Calculate the:

7.2.1 Magnitude of the velocity of car A just before the collision (3)
7.2.2 Velocity of car B just after the collision (5)
7.2.3 Magnitude of the net average force acting on car A during the collision (4)
[13]

Terms, definitions, questions & answers 20

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 8
A teacher demonstrates the principle of conservation of linear
momentum using two trolleys. The teacher first places the
trolleys, A and B, some distance apart on a flat frictionless
horizontal surface, as shown in the diagram. The mass of trolley
A is 3,5 kg and that of trolley B is 6,0 kg.
Trolley A moves towards trolley B at constant velocity. The table
below shows the position of trolley A for time intervals of 0,4 s before it collides with trolley B.

RELATIONSHIP BETWEEN POSITION AND TIME FOR TROLLEY A

Position of trolley A (m) 0 0,2 0,4 0,6
Time (s) 0 0,4 0,8 1,2

8.1 Use the table above to prove that trolley A is moving at constant velocity before it collides
with trolley B. (3)
8.2 State the principle of conservation of linear momentum in words. (2)

At time t = 1,2 s, trolley A collides with stationary trolley B. The collision time is 0,5 s after which the two
trolleys move off together.
8.3 Calculate the magnitude of the average net force exerted on trolley B by trolley A. (6)
[11]
QUESTION 9
9.1 Define the term impulse in words. (2)
9.2 The diagram below shows a gun mounted on a mechanical support which is fixed to the ground.
The gun is capable of firing bullets rapidly in a horizontal direction. Each bullet travels at a speed of
700 m∙s-1 in an easterly direction when it leaves the gun.
(Take the initial velocity of a bullet, before being fired, as zero.)
700 m∙s-1
gun N

W E
bullets

mechanical
support S
ground
The gun fires 220 bullets per minute. The mass of each bullet is 0,03 kg.
Calculate the:
9.2.1 Magnitude of the momentum of each bullet when it leaves the gun (3)
9.2.2 The net average force that each bullet exerts on the gun (5)
9.3 Without any further calculation, write down the net average horizontal force that the mechanical
support exerts on the gun. (2)
[12]
QUESTION 10
A 2 kg block is at rest on a smooth, frictionless, horizontal table. The length of the block is x. A bullet of mass
0,015 kg, travelling east at 400 m∙s-1, strikes the block and passes straight through it with constant acceleration.
Refer to the diagram below. Ignore any loss of mass of the bullet and the block.

10.1 State the principle of conservation of linear momentum in words. (2)

The block moves eastwards at 0,7 m∙s-1 after the bullet has emerged from it.
10.2 Calculate the magnitude of the velocity of the bullet immediately after it emerges from the
block. (4)
10.3 If the bullet takes 0,002 s to travel through the block, calculate the length, x, of the block. (5)
[11]

Terms, definitions, questions & answers 21

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 11
The diagram below shows two skateboards, A and B, initially at rest, with a cat standing on skateboard A. The
skateboards are in a straight line, one in front of the other and a short distance apart. The surface is flat,
frictionless and horizontal.

11.1 State the principle of conservation of linear momentum in words. (2)

EACH skateboard has a mass of 3,5 kg. The cat, of mass 2,6 kg, jumps from skateboard A with a horizontal
velocity of 3 m∙s-1 and lands on skateboard B with the same velocity. Refer to the diagram below.

11.2 Calculate the velocity of skateboard A just after the cat has jumped from it. (5)
11.3 Immediately after the cat has landed, the cat and skateboard B move horizontally to the right at
1,28 m∙s-1. Calculate the magnitude of the impulse on skateboard B as a result of the cat's landing. (3)
[10]
QUESTION 12
A trolley of mass 1,5 kg is held stationary at point A
at the top of a frictionless track. When the 1,5 kg
trolley is released, it moves down the track. It passes
point P at the bottom of the incline and collides with
a stationary 2 kg trolley at point B. Refer to the
diagram. Ignore air resistance and rotational effects.
12.1 Use the principle of conservation of
mechanical energy to calculate the speed
of the 1,5 kg trolley at point P. (4)
When the two trolleys collide, they stick together and
continue moving with constant velocity.
12.2 The principle of conservation of linear momentum is given by the incomplete statement below.
In a/an … system, the … linear momentum is conserved.
Rewrite the complete statement and fill in the missing words or phrases. (2)
12.3 Calculate the speed of the combined trolleys immediately after the collision. (4)
12.4 Calculate the distance travelled by the combined trolleys in 3 s after the collision. (3)
[13]
QUESTION 13
Initially a girl on roller skates is at rest on a smooth horizontal pavement. The girl
throws a parcel, of mass 8 kg, horizontally to the right at a speed of 4 m·s -1.
Immediately after the parcel has been thrown, the girl-roller-skate combination moves
at a speed of 0,6 m·s-1. Ignore the effects of friction and rotation.

13.1 Define the term momentum in words. (2)

13.2 Will the girl-roller-skate combination move TO THE RIGHT or TO THE LEFT after the parcel is
thrown? NAME the law in physics that can be used to explain your choice of direction. (2)
The total mass of the roller skates is 2 kg.
13.3 Calculate the mass of the girl. (5)
13.4 Calculate the magnitude of the impulse that the girl-roller-skate combination is experiencing while the
parcel is being thrown. (3)

13.5 Without any further calculation, write down the change in momentum experienced by the parcel while
it is being thrown. (2)
[14]

Terms, definitions, questions & answers 22

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 14
A soccer player kicks a ball of mass 0,45 kg to the east. The ball travels horizontally at a velocity of 9 m⋅s-1 along a
straight line, without touching the ground, and enters a container lying at rest on its side, as shown in the diagram
below. The mass of the container is 0,20 kg.

The ball is stuck in the container after the collision. The ball and container now move together along a straight line
towards the east. Ignore friction and rotational effects.

14.1 State the principle of conservation of linear momentum in words. (2)

14.2 Calculate the magnitude of the velocity of the ball-container system immediately after the collision. (4)
14.3 Determine, by means of a suitable calculation, whether the collision between the ball and container is
elastic or inelastic. (5)
[11]
QUESTION 15
A bullet moves east at a velocity of 480 m∙s-1. It hits a wooden block that is fixed to the floor. The bullet takes
0,01 s to move through the stationary block and emerges from the block at a velocity of 80 m∙s -1 east.
See the diagram below. Ignore the effects of air resistance. Consider the block-bullet system as an isolated
system.

15.1 Explain what is meant by an isolated system as used in Physics. (2)

The magnitude of the momentum of the bullet before it enters the block is 24 kg∙m∙s -1.
15.2 Calcualte the:
15.2.1 Mass of the bullet (3)
15.2.2 Average net force exerted by the wooden block on the bullet (5)
[10]
QUESTION 16
Ball P of mass 0,16 kg, moving east at a speed of 10 m∙s-1, collides head-on with another ball Q of mass 0,2 kg,
moving west at a speed of 15 m∙s-1. After the collision, ball P moves west at a speed of 5 m∙s-1, as shown in the
diagram below. Ignore the effects of friction and the rotational effects of the balls.

16.1 Define the term momentum in words. (2)

16.2 Calculate the:
16.2.1 Velocity of ball Q after the collision (5)
16.2.2 Magnitude of the impulse on ball P during the collision (3)
[10]

Terms, definitions, questions & answers 23

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 17
A simple rocket system consists of two parts, A
of mass 3m, and B of mass 2m, as shown in the
diagram. B is stacked on top of A.

17.1 State the principle of conservation of

momentum in words. (2)
The rocket is travelling vertically upwards at
a constant speed v when an internal explosion
1
causes A to move DOWNWARDS at a speed 𝑣.
3
Ignore ALL external forces on the rocket.
17.2 Calculate the velocity of B in terms of v
immediately after the internal
explosion. (5)

The graph shows the average force exerted by A on B during the internal
explosion as a function of time.
17.3 Name the physical quantity represented by the area under the graph. (1)
17.4 Redraw the graph in your ANSWER BOOK. On the same set of axes,
sketch the graph of the average force that B exerts on A as a function
of time. (2)
[10]

QUESTION 18
A ball X, of mass 10 kg, is moving eastwards with a velocity of 2 m∙s -1. It collides ELASTICALLY with another ball,
Y, of mass 2 kg which was moving with an unknown velocity v y (Diagram A). Immediately after the collision, ball X
comes to rest and ball Y moves eastwards with a kinetic energy of 36 J (Diagram B). Ignore friction.

18.1 Explain the meaning of the term elastic collision. (2)

18.2 Calculate velocity vy. (5)
The balls were in contact with each other for 0,1 s during the collision.
18.3 Calculate the magnitude of the force that ball X exerted on ball Y during the collision. (3)
[10]
QUESTION 19
19.1 What is meant by an isolated system in physics? (2)
19.2 During an experiment, a rocket of unknown mass is mounted on a toy cart of mass 20 kg. The
cart-rocket combination moves at a constant speed of 2,5 m∙s -1 along a horizontal floor. At a certain
instant, the rocket is fired horizontally in the direction of motion at a speed of 30 m∙s -1. As a result, the
cart slows down to a speed of 0,6 m∙s-1, as shown in the diagram below. Ignore frictional effects.

19.2.1 Use relevant physics principles to explain why the firing of the rocket will slow down the
cart. (2)
19.2.2 Calculate the mass of the rocket at the instant the rocket was fired from the toy cart. (5)
[9]

Terms, definitions, questions & answers 24

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 20
Trolley X of mass 1,2 kg travels at 8 m∙s-1
east and collides with trolley Y of mass 0,5 kg
which is initially at rest. Ignore all frictional
effects. The velocity-time graph shows the
velocity of trolley X before, during and after
the collision with trolley Y.
20.1 State the principle of
conservation of linear
momentum. (2)
20.2 Calculate the magnitude of the:
20.2.1 Velocity of trolley Y
immediately after the
collision (4)
20.2.2 Average net force that trolley X exerts on trolley Y during the collision (3)
20.3 Is the collision ELASTIC or INELASTIC? Explain the answer by means of suitable calculations. (5)
[14]

WORK, ENERGY AND POWER

QUESTION 1
1.1 The diagram below shows a track, A
ABC. The curved section, AB, is
frictionless. The rough horizontal 4m
section, BC, is 8 m long.

An object of mass 10 kg is
released from point A which is 8m
B C
4 m above the ground. It slides
down the track and comes to rest at point C.
1.1.1 State the principle of conservation of mechanical energy in words. (2)
1.1.2 Is mechanical energy conserved as the object slides from A to C? Write YES or NO. (1)
1.1.3 Using ENERGY PRINCIPLES only, calculate the magnitude of the frictional force
exerted on the object as it moves along BC. (6)
1.2 A motor pulls a crate of mass 300 kg with a constant force by means of a light inextensible rope
running over a light frictionless pulley as shown below. The coefficient of kinetic friction between the
crate and the surface of the plane is 0,19.
rope
motor

300 kg
25°

1.2.1 Calculate the magnitude of the frictional force acting between the crate and the
surface of the inclined plane. (3)
The crate moves up the incline at a constant speed of 0,5 m∙s -1.
1.2.2 Calculate the average power delivered by the motor while pulling the crate up the incline. (6)
[18]
QUESTION 2
A 5 kg block is released from rest from a height of 5 m and slides down a frictionless incline to P as shown
below. It then moves along a frictionless horizontal portion PQ and finally moves up a second rough inclined
plane. It comes to a stop 3 m above the horizontal at point R.

5 kg
R
5m
3m
θ
P Q

Terms, definitions, questions & answers 25

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

The frictional force, a non-conservative force, between the surface and the block is 18 N.
2.1 Using ENERGY PRINCIPLES only, calculate the speed of the block at point P. (4)
2.2 Explain why the kinetic energy at point P is the same as that at point Q. (2)
2.3 Explain the term non-conservative force. (2)
2.4 Calculate the angle (θ) of the slope QR. (7)
[15]
QUESTION 3
F
The diagram below shows a heavy block of mass 100 kg sliding
down a rough 25° inclined plane. A constant force F is applied 100 kg
on the block parallel to the inclined plane as shown in the
diagram below, so that the block slides down at a constant
velocity. The magnitude of the kinetic frictional force (fk) 25°
between the block and the surface of the inclined plane is 266 N.
3.1 Friction is a non-conservative force. What is meant by the term non- conservative force? (2)
3.2 A learner states that the net work done on the block is greater than zero.
3.2.1 Is the learner correct? Answer only YES or NO. (1)
3.2.2 Explain the answer to QUESTION 3.2.1 using physics principles. (2)
3.3 Calculate the magnitude of the force F. (4)
If the block is released from rest without the force F being applied, it moves 3 m down the inclined plane.
3.4 Calculate the speed of the block at the bottom of the inclined plane. (6)
[15]

QUESTION 4
The track for a motorbike race consists of a straight, horizontal section that is 800 m
long. A participant, such as the one in the picture, rides at a certain average speed
and completes the 800 m course in 75 s. To maintain this speed, a constant driving
force of 240 N acts on the motorbike.

4.1 Calculate the average power developed by the motorbike for this motion. (3)

Another person
practises on the
same motorbike on a track with an incline.
Starting from rest, the person rides a distance of
450 m up the incline which has a vertical height 5m 450 m
of 5 m, as shown. The total frictional force acting
on the motorbike is 294 N. The combined mass
of rider and motorbike is 300 kg. The average driving force on the motorbike as it moves up the incline is 350 N.
Consider the motorbike and rider as a single system.

4.2 Draw a labelled free-body diagram for the motorbike-rider system on the incline. (4)
4.3 State the WORK-ENERGY theorem in words. (2)
4.4 Use energy principles to calculate the speed of the motorbike at the end of the 450 m ride. (6)
[15]
QUESTION 5
A constant force F, applied at an angle of 20o above the horizontal, pulls a 200 kg block, over a distance of 3 m,
on a rough, horizontal floor as shown in the diagram below.
F F
AFTER BEFORE
20° 20°
200 kg 200 kg
3m

Rough floor
The coefficient of kinetic friction, μk, between the floor surface and the block is 0,2.
5.1 Give a reason why the coefficient of kinetic friction has no units. (1)
5.2 State the work-energy theorem in words. (2)
5.3 Draw a free-body diagram indicating ALL the forces acting on the block while it is being pulled. (4)
5.4 Show that the work done by the kinetic frictional force (Wfk) on the block can be written as
Wfk = (-1 176 + 0,205 F) J. (4)
5.5 Calculate the magnitude of the force F that has to be applied so that the net work done by all forces on
the block is zero. (4)
[15]

Terms, definitions, questions & answers 26

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 6
A 20 kg block is released from rest from the top of a ramp at point A at
20 kg A a construction site as shown in the diagram. The ramp is inclined at an
angle of 30° to the horizontal and its top is at a height of 5 m above the
ground.
5m 6.1 State the principle of conservation of mechanical energy in
words. (2)
6.2 The kinetic frictional force between the 20 kg block and the
B 30°
surface of the ramp is 30 N. Use energy principles to calculate
the:
6.2.1 Work done by the kinetic frictional force on the block (3)
6.2.2 Speed of the block at point B at the bottom of the ramp (5)
6.3 A 100 kg object is pulled up the SAME RAMP at a constant speed of 2 m∙s -1 by a small motor.
The kinetic frictional force between the 100 kg object and the surface of the ramp is 25 N. Calculate the
average power delivered by the small motor in the pulling of the object up the incline. (4)
[14]

QUESTION 7
A pendulum with a bob of mass 5 kg is held stationary at a height h metres above the ground. When released, it
collides with a block of mass 2 kg which is stationary at point A. The bob swings past A and comes to rest
momentarily at a position ¼ h above the ground.he diagrams below are NOT drawn to scale.
Before After

h 2 kg 2 kg
¼h
A B

Immediately after the collision the 2 kg block begins to move from A to B at a constant speed of 4,95 m∙s-1.
Ignore frictional effects and assume that no loss of mechanical energy occurs during the collision.
7.1 Calculate the kinetic energy of the block immediately after the collision. (3)
7.2 Calculate the height h (4)
The block moves from point B at a velocity of 4,95 m·s -1 up a rough inclined plane to point C. The speed of the
block at point C is 2 m·s-1. Point C is 0,5 m above the horizontal, as shown in the diagram below. During its
motion from B to C a uniform frictional force acts on the block.
4,95 m·s-1 C

2 kg 0,5 m

B
7.3 State the work-energy theorem in words. (2)
7.4 Use energy principles to calculate the work done by the frictional force when the 2 kg block moves from
point B to point C. (4)
[13]
QUESTION 8
The diagram below shows a bullet of mass 20 g that is travelling horizontally. The bullet strikes a stationary 7 kg
block and becomes embedded in it. The bullet and block together travel on a rough horizontal surface a distance of
2 m before coming to a stop.
20 g
7 kg

2m
8.1 Use the work-energy theorem to calculate the magnitude of the velocity of the bullet-block system
immediately after the bullet strikes the block, given that the frictional force between the block and surface
is 10 N. (5)
8.2 State the principle of conservation of linear momentum in words. (2)
8.3 Calculate the magnitude of the velocity with which the bullet hits the block. (4)
[11]

Terms, definitions, questions & answers 27

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 9
The diagram below shows a boy skateboarding
on a ramp which is inclined at 20° to the
horizontal. A constant frictional force of 50 N acts
on the skateboard as it moves from P to Q.
Consider the boy and the skateboard as a single
unit of mass 60 kg. Ignore the effects of air
friction.
9.1 Draw a labelled free-body diagram,
showing ALL the forces acting on the
boy-skateboard unit while moving down
the ramp from P to Q. (3)
Points P and Q on the ramp are 25 m apart. The skateboarder passes point P at a speed vi and passes point Q
at a speed of 15 m∙s-1. Ignore rotational effects due to the wheels of the skateboard.
9.2 State the work-energy theorem in words. (2)
9.3 Use energy principles to calculate the speed vi of the skateboarder at point P. (5)
9.4 Calculate the average power dissipated by the skateboarder to overcome friction between P and Q. (4)
[14]
QUESTION 10
A lift arrangement comprises an electric motor, a cage and its counterweight. The counterweight moves vertically
downwards as the cage moves upwards. The cage and counterweight move at the same constant speed. Refer to
the diagram below.
The cage, carrying passengers, moves vertically upwards at a
electric motor constant speed, covering 55 m in 3 minutes. The counterweight
has a mass of 950 kg. The total mass of the cage and passengers
is 1 200 kg.

The electric motor provides the power needed to operate the lift
cage
system. Ignore the effects of friction.
10.1 Define the term power in words. (2)
10.2 Calculate the work done by the:
10.2.1 Gravitational force on the cage (3)
10.2.2 Counterweight on the cage (2)
Counter 10.3 Calculate the average power required by the
weight motor to operate the lift arrangement in 3 minutes.
Assume that there are no energy losses due to heat
and sound. (6)
[13]
QUESTION 11
In the diagram below, a 4 kg block lying on a
rough horizontal surface is connected to a 6 kg
block by a light inextensible string passing over a
light frictionless pulley. Initially the blocks are
HELD AT REST.
11.1 State the work-energy theorem in
words. (2)
When the blocks are released, the 6 kg block
falls through a vertical distance of 1,6 m.
11.2 Draw a labelled free-body diagram for
the 6 kg block. (2)
11.3 Calculate the work done by the
gravitational force on the 6 kg block. (3)
The coefficient of kinetic friction between the
4 kg block and the horizontal surface is 0,4.
Ignore the effects of air resistance.
11.4 Use energy principles to calculate the speed of the 6 kg block when it falls through 1,6 m while still
attached to the 4 kg block. (5)
[12]

Terms, definitions, questions & answers 28

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 12
A slide, PQR, at an amusement park consists of a curved frictionless section, PQ, and a section, QR, which is
rough, straight and inclined at 30° to the horizontal. The
starting point, P, is 3 m above point Q. The straight section,
QR, is 5 m long.

A learner, with mass 50 kg, starting from rest at P, slides

down section PQ, then continues down the straight section,
QR.
12.1 State the law of conservation of mechanical
energy in words. (2)
12.2 Calculate the speed of the learner at Q. (4)
12.3 Draw a labelled free-body diagram for the
learner while he/she is on section QR. (3)
The coefficient of kinetic friction (μk) between the learner and the surface QR is 0,08.
12.4 Calculate the magnitude of the kinetic frictional force acting on the learner when the learner is on
section QR. (3)
12.5 Use energy principles to calculate the speed of the learner at point R. (5)
[17]

QUESTION 13
A load of mass 75 kg is initially at rest on the ground. It is then pulled
vertically upwards at a constant acceleration of 0,65 m⋅s-2 by means of a light
inextensible rope. Refer to the diagram below. Ignore air resistance,
rotational effects and the mass of the rope.

13.1 Draw a labelled free-body diagram for the load while it moves
upward. (2)
13.2 Name the non-conservative force acting on the load. (1)
13.3 Calculate the work done on the load by the gravitational force
when the load has reached a height of 12 m. (3)
13.4 State the work-energy theorem in words. (2)
13.5 Use the work-energy theorem to calculate the speed of the load
when it is at a height of 12 m. (5)
[13]

QUESTION 14
The diagram, not drawn to scale, shows a vehicle with a mass of 1 500 kg starting from rest at point A at the
bottom of a rough incline. Point B is 200 m vertically above the horizontal. The total work done by force F that
moves the vehicle from point A to point B in 90 s is 4,80 x 106 J.

14.1 Define the term non-conservative force. (2)

14.2 Is force F a conservative force? Choose from: YES or NO. (1)
14.3 Calculate the average power generated by force F. (3)

The speed of the vehicle when it reaches point B is 25 m∙s-1.

14.4 State the work-energy theorem in words. (2)
14.5 Use energy principles to calculate the total work done on the vehicle by the frictional forces. (5)
[13]

Terms, definitions, questions & answers 29

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 15
A 70 kg box is initially at rest at the bottom of a ROUGH plane inclined at an angle of 30° to the horizontal. The
box is pulled up the plane by means of a light inextensible rope, held parallel to the plane, as shown in the
diagram below. The force applied to the rope is 700 N.

15.1 What is the name given to the force in the rope? (1)
15.2 Give a reason why the mechanical energy of the
system will NOT be conserved as the box is pulled up
the plane. (1)

The box is pulled up over a distance of 4 m along the plane. The kinetic frictional force between the box and
the plane is 178,22 N.

15.3 Draw a labelled free-body diagram for the box as it moves up the plane. (4)
15.4 Calculate the work done on the box by the frictional force over the 4 m. (3)
15.5 Use energy principles to calculate the speed of the box after it has moved 4 m. (5)
15.6 When the box is 4 m up the incline, the rope accidentally breaks, causing the box to slide back down to
the bottom of the inclined plane. What will be the total work done by friction when the box moves up
and then down to the bottom of the inclined plane? (1)
[15]

QUESTION 16
An object of mass 1,8 kg slides down a rough curved track and passes point A, which is 1,5 m above the
ground, at a speed of 0,95 m·s-1. The object reaches point B at the bottom of the track at a speed of 4 m·s -1.

16.1 Define the term conservative force. (2)

16.2 Name the conservative force acting on the object. (1)
16.3 Is mechanical energy conserved as the object slides from point A to point B? Choose from YES or NO.
Give a reason for the answer. (2)
16.4 Calculate the gravitational potential energy of the object when it was at point A. (3)
16.5 Using energy principles, calculate the work done by friction on the object as it slides from point A to
point B. (4)

Surface BC in the diagram above is frictionless.

16.6 What is the value of the net work done on the object as it slides from point B to point C? (1)
[13]

Terms, definitions, questions & answers 30

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 17
A roller-coaster car of mass 200 kg, with the
engine switched off, travels along track
ABC, which has a rough surface, as shown
in the diagram. At point A, which is 10 m
above the ground, the speed of the car is
4 m·s-1.

At point B, which is at a height h above the

ground, the speed of the car is 2 m·s-1.
During the motion from point A to point B,
3,40 × 103 J of energy is used to overcome
friction. Ignore rotational effects due to the
wheels of the car.
17.1 Define the term non-conservative force. (2)
17.2 Calculate the change in the kinetic energy of the car after it has travelled from point A to point B. (3)
17.3 Use energy principles to calculate the height h. (4)
17.4 On reaching point B, the car's engine is switched on in order to move up the incline to point C, which
is 22 m above the ground. While moving from point B to point C, the car travels for 15 s at a constant
speed of 2 m·s-1 while an average frictional force of 50 N acts on it. Calculate the power delivered by
the engine to move the car from point B to point C. (5)
[14]

QUESTION 18
A demolition ball is used by a crane to break the wall
of a building. The demolition ball, of mass 1 250 kg,
is lifted by the crane to a point R at a height of 5,8 m
above its lowest position in 60 s. Ignore air friction.
18.1 Define the term power in words. (2)
18.2 Calculate the average power dissipated
by the crane in lifting the demolition ball
to point R. (3)
The demolition ball is released from point R and
strikes the wall at the lowest point of its swing. The ball then moves 0,25 m HORIZONTALLY into the wall before
coming to rest.
18.3 Define the term conservative force. (2)
18.4 Is the force which the wall exerts on the ball a CONSERVATIVE or a NON-CONSERVATIVE force? (1)
18.5 State the energy conversion that takes place during the downward swing of the demolition ball. (1)
18.6 Using energy principles, calculate the magnitude of the average force exerted on the ball while it
moves into the wall. (5)
[14]

QUESTION 19
A 2 kg box is released from rest at point P,
5 m above the ground. It slides down
a smooth frictionless curved track PQ.
See the diagram.

19.1 State the principle of conservation

of mechanical energy in words. (2)
19.2 Use the PRINCIPLE OF
CONSERVATION OF MECHANICAL ENERGY to calculate the speed of the box when it reaches
point Q. (3)
The box passes point Q and moves 10 m on a rough horizontal surface before striking a barrier at point R at
a speed of 4 m∙s-1.
19.3 Use ENERGY PRINCIPLES to calculate the magnitude of the average frictional force acting on the
box as it moves from Q to R. (4)
The barrier exerts an impulse of 14 N∙s to the LEFT on the box when the box strikes the barrier.
19.4 Calculate the change in kinetic energy of the box after striking the barrier. (5)
[14]

Terms, definitions, questions & answers 31

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 20
Arrestor beds are used to help moving trucks to come to a stop when their brakes fail. The driver of a
30 000 kg truck driving down a steep road drives onto an ASCENDING arrestor bed inclined at 28° to the
horizontal, as shown in the diagram below.

20.1 State the work-energy theorem in words. (2)

The truck with failed brakes passes point A at the beginning of the arrestor bed at a speed of 33 m∙s -1. The
average frictional force on the truck is 31 000 N while the truck moves up the arrestor bed. Ignore the
rotational effects of the wheels.
20.2 Give a reason why the net work done on the truck, while moving on the arrestor bed, is negative. (1)
20.3 Use ENERGY PRINCIPLES to calculate the minimum length of the arrestor bed needed to bring the
truck to a stop. (5)

The diagram below shows the same truck entering a DESCENDING arrestor bed inclined at 28° to the
horizontal. The initial speed of the truck and the average frictional force on the truck are 33 m∙s -1 and 31 000 N
respectively.

20.4 Which arrestor bed, ASCENDING or DESCENDING, will be able to stop the truck in a shorter
distance? Explain the answer in terms of the forces acting on the truck. (3)
[11]
QUESTION 21
A 12 kg block is initially at rest at point A at the bottom of a ROUGH inclined plane. The block is pulled up the
incline by a constant force F acting parallel to the incline. The block reaches point B, which is at a vertical
height of 4,5 m above the horizontal, with a speed of 2,25 m·s-1. See the diagram below.

21.1 Define the term non-conservative force. (2)

21.2 Draw a labelled free-body diagram for the block when it is pulled up the inclined plane. (4)
21.3 Calculate the total work done on the block by the NON-CONSERVATIVE forces when the block
moved from point A to point B. (4)

Terms, definitions, questions & answers 32

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

The same constant force F now moves the block at a CONSTANT VELOCITY across a rough horizontal
surface from point B to point C, as shown below. Force F acts parallel to the horizontal surface. The magnitude
of the constant frictional force acting on the block while moving from point B to point C is 42 N LARGER than
the magnitude of the constant frictional force acting on the block when it moves from point A to point B.

21.4 Calculate the distance from point A to point B. (5)

[15]

DOPPLER EFFECT
QUESTION 1
1.1 The siren of a stationary ambulance emits a note of frequency 1 130 Hz. When the ambulance moves
at a constant speed, a stationary observer detects a frequency that is 70 Hz higher than that emitted
by the siren.
1.1.1 State the Doppler effect in words. (2)
1.1.2 Is the ambulance moving towards or away from the observer? Give a reason. (2)
1.1.3 Calculate the speed at which the ambulance is travelling. Take the speed of sound in air as
343 m∙s-1. (5)
1.2 A study of spectral lines obtained from various stars can provide valuable information about the
movement of the stars. The two diagrams below represent different spectral lines of an element.
Diagram 1 represents the spectrum of the element in a laboratory on Earth. Diagram 2 represents the
spectrum of the same element from a distant star.
Blue Red
Diagram 1
Blue Red
Diagram 2
Is the star moving towards or away from the Earth? Explain the answer by referring to the shifts in the
spectral lines in the two diagrams above. (2)
[11]
QUESTION 2
The Doppler effect is applicable to both sound and light waves. It also has very important applications in our
everyday lives.
2.1 A hooter on a stationary train emits sound with a frequency of 520 Hz, as detected by a person standing
on the platform. Assume that the speed of sound is 340 m∙s -1 in still air. Calculate the:
2.1.1 Wavelength of the sound detected by the person (2)
2.1.2 Wavelength of the sound detected by the person when the train moves towards
him/her at a constant speed of 15 m∙s-1 with the hooter still emitting sound (6)
2.2 Explain why the wavelength calculated in QUESTION 2.1.1 differs from that obtained in
QUESTION 2.1.2. (2)
2.3 Use your knowledge of the Doppler effect to explain red shifts. (2)
[12]

Terms, definitions, questions & answers 33

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 3
The graph below shows the relationship between the apparent frequency (fL) of the sound heard by a
STATIONARY listener and the velocity (vs) of the source travelling TOWARDS the listener.
Graph showing apparent frequency (fL) versus velocity of sound source (vs)
950

•
900
•
fL (Hz)

850 •
•

800 •
0 10 20 30 40
vs (m∙s-1)
3.1 State the Doppler effect in words. (2)
3.2 Use the information in the graph to calculate the speed of sound in air. (5)
3.3 Sketch a graph of apparent frequency (fL) versus velocity (vs) of the sound source if the source was
moving AWAY from the listener. It is not necessary to use numerical values for the graph. (2)
[9]
QUESTION 4
4.1 The data below was obtained during an investigation into the relationship between the different
velocities of a moving sound source and the frequencies detected by a stationary listener for each
velocity. The effect of wind was ignored in this investigation.

Experiment number 1 2 3 4
Velocity of the sound source (m∙s-1) 0 10 20 30
Frequency (Hz) of the sound detected by
900 874 850 827
the stationary listener

4.1.1 Write down the dependent variable for this investigation. (1)
4.1.2 State the Doppler effect in words. (2)
4.1.3 Was the sound source moving TOWARDS or AWAY FROM the listener? Give a reason for
the answer. (2)
4.1.4 Use the information in the table to calculate the speed of sound during the investigation. (5)
4.2 The spectral lines of a distant star are shifted towards the longer wavelengths of light. Is the star
moving TOWARDS or AWAY FROM the Earth? (1)
[11]
QUESTION 5
Reflection of sound waves enables bats to hunt for moths. The sound wave produced by a bat has a frequency
of 222 kHz and a wavelength of 1,5 x 10-3 m.
5.1 Calculate the speed of this sound wave through the air. (3)
5.2 A stationary bat sends out a sound signal and receives the same signal reflected from a moving moth
at a frequency of 230,3 kHz.
5.2.1 Is the moth moving TOWARDS or AWAY FROM the bat? (1)
5.2.2 Calculate the magnitude of the velocity of the moth, assuming that the velocity is constant. (6)
[10]
QUESTION 6
An ambulance is travelling towards a hospital at a constant velocity of 30 m∙s -1. The
siren of the ambulance produces sound of frequency 400 Hz. Take the speed of sound
in air as 340 m∙s-1. The diagram shows the wave fronts of the sound produced from the Y X
siren as a result of this motion.
6.1 At which side of the diagram, X or Y, is the hospital situated? (1)
6.2 Explain the answer to QUESTION 6.1. (3)
6.3 Calculate the frequency of the sound of the siren heard by a person standing at the hospital. (5)

Terms, definitions, questions & answers 34

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

6.4 A nurse is sitting next to the driver in the passenger seat of the ambulance as it approaches the
hospital. Calculate the wavelength of the sound heard by the nurse. (3)
[12]
QUESTION 7
7.1 An ambulance is moving towards a stationary listener at a constant speed of 30 m∙s-1. The siren of the
ambulance emits sound waves having a wavelength of 0,28 m. Take the speed of sound in air as
340 m∙s-1.
7.1.1 State the Doppler effect in words. (2)
7.1.2 Calculate the frequency of the sound waves emitted by the siren as heard by the ambulance
driver. (3)
7.1.3 Calculate the frequency of the sound waves emitted by the siren as heard by the listener. (5)
7.1.4 How would the answer to QUESTION 7.1.3 change if the speed of the ambulance were LESS
THAN 30 m∙s-1? Write down only INCREASES, DECREASES or REMAINS THE SAME. (1)
7.2 An observation of the spectrum of a distant star shows that it is moving away from the earth. Explain,
in terms of the frequencies of the spectral lines, how it is possible to conclude that the star is moving
away from the earth. (2)
[13]
QUESTION 8
The speed of sound in air depends among others on the air temperature. The following graph shows this
relationship.

8.1 Which one of temperature or speed is the dependent variable? (1)

8.2 The gradient of this graph is equal to 0,6 m·s-1·K-1. With how much does the speed, in m·s-1, increase
for every 5 K increase in temperature? (1)
8.3 Two experiments are done to verify the Doppler effect. In the first experiment, an object approaches a
stationary observer X at a constant speed of 57,5 m·s-1. The object is equipped with a siren that emits
sound waves at a fixed frequency of 1 000 Hz. The motion takes place in still air at a temperature of
295 K.
8.3.1 Describe what the Doppler effect is. (2)
8.3.2 What is the speed of sound, in m·s-1, in air at 295 K? (Use the graph.) (1)
8.3.3 Calculate the frequency measured by observer X. (4)
8.3.4 In the second experiment, the object moves away from observer X at the same constant speed
as before. What should the air temperature, in kelvin, be to make it a fair test between the two
experiments? (1)

Terms, definitions, questions & answers 35

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

8.4 Consider the three diagrams below. Each one represents the source (with the siren) and observer X.
Two of the diagrams are applicable on the above-mentioned experiments.
Diagram 1 Diagram 2 Diagram 3
Source Source Source
X X X

8.4.1 Which diagram is applicable to experiment 2? (1)

8.4.2 Which diagram is NOT applicable to any of the experiments? Give a reason for your answer. (2)
[13]
QUESTION 9
9.1 A police car is moving at constant velocity on a freeway. The siren of the car emits sound
waves with a frequency of 330 Hz. A stationary sound detector measures the frequency of
the sound waves of the approaching siren as 365 Hz.
9.1.1 State the Doppler Effect in words. (2)
9.1.2 Calculate the speed of the car. (Speed of sound in air is 340 m·s -1.) (5)
9.2 The spectrum of a distant star when viewed from an observatory on Earth appears to have
undergone a red shift. Explain the term red shift. (3)
[10]
QUESTION 10
10.1 A sound source is moving at constant velocity past a stationary observer. The frequency detected
as the source approaches the observer is 2 600 Hz. The frequency detected as the source moves
away from the observer is 1 750 Hz. Take the speed of sound in air as 340 m∙s -1.
10.1.1 Name the phenomenon that describes the apparent change in frequency detected by
the observer. (1)
10.1.2 State ONE practical application of the phenomenon in QUESTION 10.1.1 in the field
of medicine. (1)
10.1.3 Calculate the speed of the moving source. (6)
10.1.4 Will the observed frequency INCREASE, DECREASE or REMAIN THE SAME if the velocity
of the source increased as it:
(a) Moves towards the observer (1)
(b) Moves away from the observer (1)
10.2 Spectral lines of star X at an observatory are observed to be red shifted.
10.2.1 Explain the term red shifted in terms of wavelength. (2)
10.2.2 Will the frequency of the light observed from the star INCREASE, DECREASE or
REMAIN THE SAME? (1)
[13]
QUESTION 11
A police car moving at a constant velocity with its siren on,
passes a stationary listener. The graph shows the changes
in the frequency of the sound of the siren detected by the
listener.

11.1 State the Doppler Effect in words. (2)

11.2 Write down the frequency of the sound detected
by the listener as the police car:
11.2.1 Approaches the listener (1)
11.2.2 Moves away from the listener (1)
11.3 Calculate the speed of the police car. Take the
speed of sound in air to be 340 m∙s-1. (6)
[10]

Terms, definitions, questions & answers 36

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 12
A police car is moving at a constant speed on a straight horizontal road. The siren of the car emits sound of
constant frequency. EACH of two observers, A and
B, standing some distance apart on the same side of
the road, records the frequency of the detected
sound. Observer A records a frequency of 690 Hz
and observer B records a frequency of 610 Hz.

12.1 State the Doppler effect in words. (2)

12.2 In which direction is the car moving? Choose from TOWARDS A or AWAY FROM A. Give a reason for
the answer. (2)
12.3 Determine the speed of the police car. Take the speed of sound in air as 340 m·s-1. (6)
12.4 Name ONE application of the Doppler effect. (1)
[11]
QUESTION 13
A sound source, moving at a constant speed of 240 m∙s -1 towards a detector, emits sound at a constant
frequency. The detector records a frequency of 5 100 Hz. Take the speed of sound in air to be 340 m∙s-1.

13.1 State the Doppler effect in words. (2)

13.2 Calculate the wavelength of the sound emitted by the source. (7)

Some of the sound waves are reflected from the detector towards the approaching source.

13.3 Will the frequency of the reflected sound wave detected by the sound source be EQUAL TO,
GREATER THAN or SMALLER THAN 5 100 Hz? (1)
[10]
QUESTION 14
The alarm of a vehicle parked next to a straight horizontal road goes off, emitting sound with a wavelength of
0,34 m. A patrol car is moving at a constant speed on the same road. The driver of the patrol car hears a sound
with a frequency of 50 Hz lower than the sound emitted by the alarm.
Take the speed of sound in air as 340 m∙s-1.

14.1 State the Doppler effect in words. (2)

14.2 Is the patrol car driving TOWARDS or AWAY FROM the parked vehicle? Give a reason for
the answer. (2)
14.3 Calculate the frequency of the sound emitted by the alarm. (3)
14.4 The patrol car moves a distance of x metres in 10 seconds. Calculate the distance x. (6)
[13]
QUESTION 15
15.1 A patrol car is moving at a constant speed
towards a stationary observer. The driver
switches on the siren of the car when it is
300 m away from the observer.
The observer records the detected frequency of
the sound waves of the siren as the patrol car
approaches, passes and moves away from him.
The information obtained is shown in the
graph.

15.1.1 Calculate the speed of the patrol car. (2)

15.1.2 State the Doppler effect. (2)
15.1.3 The detected frequency suddenly changes at t = 10 s. Give a reason for this change. (2)
Take the speed of sound in air as 340 m∙s-1.
15.1.4 Calculate the frequency of the sound emitted by the siren. (4)
15.2 State TWO applications of the Doppler effect. (2)
[12]

Terms, definitions, questions & answers 37

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 16
The siren of a police car, which is travelling at a constant speed along a straight horizontal road, emits sound
waves of constant frequency. Detector P is placed inside the police car and detector Q is placed next to the
road at a certain distance away from the car. The two detectors record the changes in the air pressure
readings caused by the sound waves emitted by the siren as a function of time.
The graphs below were obtained from the recorded results.

GRAPH A: AIR PRESSURE VS TIME RECORDED BY DETECTOR P IN THE CAR

GRAPH B: AIR PRESSURE VS TIME RECORDED BY DETECTOR Q NEXT TO THE ROAD

16.1 Different patterns are shown above for the same sound wave emitted by the siren. What phenomenon
is illustrated by the two detectors showing the different patterns? (1)

The police car is moving AWAY from detector Q.

16.2 Use the graphs and give a reason why it can be confirmed that the police car is moving away from
detector Q. (1)
16.3 Calculate the frequency of the sound waves recorded by detector P. (3)
16.4 Use the information in the graphs to calculate the speed of the police car. Take the speed of sound in
air as 340 m∙s-1. (6)
[11]
QUESTION 17
The siren of a train, moving at a constant speed along a
straight horizontal track, emits sound with a constant
frequency. A detector, placed next to the track, records
the frequency of the sound waves. The results obtained
are as shown in the graph.
17.1 State the Doppler effect in words. (2)
17.2 Does the detector record the frequency
of 3 148 Hz when the train moves
TOWARDS the detector or AWAY from
the detector? (1)
17.3 Calculate the speed of the train. Take
the speed of sound in air as 340 m∙s-1. (6)
17.4 The detector started recording the frequency of the moving train's siren when the train was 350 m
away. Calculate time t1 indicated on the graph above. (2)
[11]

Terms, definitions, questions & answers 38

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 18
A learner in a car, moving at a constant speed of
10 m∙s-1 along a straight horizontal road, records the
frequency of sound emitted by a distant stationary
source. The learner then repeats the recording of the
frequency of the sound when the car travels at a new
constant speed of 20 m∙s-1. The graph, not drawn to
scale, is obtained from the results.

18.1 State the Doppler effect. (2)

18.2 Use the graph to answer the following
questions.
18.2.1 Write down the frequency of the sound
emitted by the stationary source. Give a reason for
the answer. (2)
18.2.2 In which direction is the car moving relative to the source? Choose from TOWARDS or
AWAY. Give a reason for the answer. (2)
18.2.3 Calculate the speed of sound in air. (5)
[11]
QUESTION 19
The siren of a stationary ambulance emits sound waves at a constant frequency of 680 Hz. A man is standing
with a detector that records the wavelength of the sound emitted by the siren, as shown in the diagram below.

The speed of sound in air is 340 m∙s-1.

19.1 Calculate the wavelength of the detected sound. (3)
The ambulance now moves at a constant speed along the road TOWARDS the man. The detector now records
the wavelength of the sound, which differs from the previous reading by 0,05 m.
19.2 State the Doppler effect. (2)
19.3 How would EACH of the following have changed when the ambulance approached the detector
compared to when the ambulance was stationary? Choose from INCREASED, DECREASED or NO
CHANGE.
19.3.1 Distance between the wave fronts (1)
19.3.2 Frequency of the detected waves (1)
19.4 Calculate the speed of the ambulance. (5)
[12]
QUESTION 20
A car moves at a constant speed of 10 m∙s-1
TOWARDS a stationary sound source. The
sound source emits sound waves of frequency
880 Hz. A sound detector A is attached to the
car and another sound detector B is attached
to the sound source. Detector B detects the
sound waves reflected from the car. The speed of sound in air is 340 m∙s-1.
20.1 State the Doppler effect in words. (2)
20.2 Calculate the wavelength of the sound waves emitted by the source. (3)
20.3 Calculate the frequency of the sound waves detected by detector A. (4)
The sketch graph below shows the frequency recorded by detector A.

Terms, definitions, questions & answers 39

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

20.4 Redraw the graph above for detector A in your ANSWER BOOK. On the same set of axes, sketch the
graph of the frequency recorded by detector B. Label this graph as B. (2)
[11]
QUESTION 21
A learner investigates the relationship between the observed
frequency and the frequency of sound waves emitted by
a stationary source. The learner moves towards the source at
a constant velocity and records the observed frequency (fL) for
a given source frequency (fS). This process is repeated for
different frequencies of the source, with the learner moving at the
same constant velocity each time. The graph shows how the
observed frequency changes as the frequency of sound waves
emitted by the source changes.
21.1 Name the phenomenon illustrated by the graph. (1)
21.2 Name ONE application in the medical field of
the phenomenon in QUESTION 21.1. (1)
21.3 Write down the type of proportionality that exists
between fL and fS as illustrated by the graph. (1)
21.4 The gradient of the graph obtained is found to be 1,06. If the speed of sound in air is 340 m·s -1,
calculate the magnitude of the velocity at which the learner approaches the source. (5)
21.5 The investigation is now repeated with the learner moving at a HIGHER constant velocity towards the
sound source. Copy the graph in your ANSWER BOOK and label it as A. On the same set of axes,
sketch the graph that will be obtained when the learner is moving at the HIGHER velocity. Label this
graph as B. (2)
[10]

ELECTROSTATICS
QUESTION 1
The diagram shows two small identical metal spheres, R and S, each + 8 μC - 4 μC
placed on a wooden stand. Spheres R and S carry charges of + 8 μC and R S
- 4 μC respectively. Ignore the effects of air.
1.1 Explain why the spheres were placed on wooden stands. (1)
Spheres R and S are brought into contact for a while and then
separated by a small distance.
1.2 Calculate the net charge on each of the spheres. (2)
1.3 Draw the electric field pattern due to the two spheres R and S. (3)
After R and S have been in contact and separated, a third sphere, T, of charge + 1 µC is now placed between
them as shown in the diagram below.
10 cm 20 cm
R T S

1.4 Draw a free-body diagram showing the electrostatic forces experienced by sphere T due to spheres R
and S. (2)
1.5 Calculate the net electrostatic force experienced by T due to R and S. (6)
1.6 Define the electric field at a point. (2)
1.7 Calculate the magnitude of the net electric field at the location of T due to R and S.
(Treat the spheres as if they were point charges.) (3)
[19]
QUESTION 2
Two identical negatively charged spheres, A and B, having charges of 0,5 m
the same magnitude, are placed 0,5 m apart in vacuum. The ● ●
magnitude of the electrostatic force that one sphere exerts on the A B
other is 1,44 x 10 -1 N.
2.1 State Coulomb's law in words. (2)
2.2 Calculate the:
2.2.1 Magnitude of the charge on each sphere (4)
2.2.2 Excess number of electrons on sphere B (3)

Terms, definitions, questions & answers 40

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

2.3 P is a point at a distance of 1 m from sphere B.

0,5 m 1m
● ●
A B P

2.3.1 What is the direction of the net electric field at point P? (1)
2.3.2 Calculate the number of electrons that should be removed from sphere B so that the net
electric field at point P is 3 x 104 N·C-1 to the right. (8)
[18]
QUESTION 3
Three point charges, Q1, Q2 and Q3, carrying Q3 = +5 µC 30 cm Q1 = +6 µC
charges of +6 µC, -3 µC and +5 µC
respectively, are arranged in space as shown in
the diagram below. The distance between Q3 10 cm
and Q1 is 30 cm and that between Q3 and Q2 is
10 cm.
3.1 State Coulomb's law in words. (2) Q2 = -3 µC
3.2 Calculate the net force acting on
charge Q3 due to the presence of Q1 and Q2. (7)
[9]
QUESTION 4
Two identical neutral spheres, M and N, are placed on insulating stands. They M N
are brought into contact and a charged rod is brought near sphere M.
When the spheres are separated it is found that 5 x 106 electrons were Charged
transferred from sphere M to sphere N. rod
4.1 What is the net charge on sphere N after separation? (3)
4.2 Write down the net charge on sphere M after separation. (2)
The charged spheres, M and N, are now arranged along a straight line, in
space, such that the distance
between their centres is 15 cm. A point P lies 10 cm to the right of N as shown in the diagram below.
M N P
×
15 cm 10 cm

4.3 Define the electric field at a point. (2)

4.4 Calculate the net electric field at point P due to M and N. (6)
[13]
QUESTION 5
A very small graphite-coated sphere P is rubbed with a
cloth. It is found that the sphere acquires a charge of
7° + 0,5 µC.
5.1 Calculate the number of electrons removed from
sphere P during the charging process. (3)

Now the charged sphere P is suspended from a light,

20 cm
R inextensible string. Another sphere, R, with a charge of
P – 0,9 µC, on an insulated stand, is brought close to sphere P.
As a result sphere P moves to a position where it is 20 cm
from sphere R, as shown. The system is in equilibrium and
the angle between the string and the vertical is 7°.
5.2 Draw a labelled free-body diagram showing ALL the forces acting on sphere P. (3)
5.3 State Coulomb's law in words. (2)
5.4 Calculate the magnitude of the tension in the string. (5)
[13]
QUESTION 6
Two charged particles, Q1 and Q2, are placed 0,4 m apart along a straight line. The charge on Q1 is + 2 x 10-5 C,
and the charge on Q2 is – 8 x 10-6 C. Point X is 0,25 m east of Q1, as shown in the diagram below.
Q1 Q2 N
0,25 m X
●
0,4 m W E

Calculate the: S
6.1 Net electric field at point X due to the two charges (6)
6.2 Electrostatic force that a – 2 x 10-9 C charge will experience at point X (4)
Terms, definitions, questions & answers 41
 Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

The – 2 x 10-9 C charge is replaced with a charge of – 4 x 10-9 C at point X.

6.3 Without any further calculation, determine the magnitude of the force that the – 4 x 10-9 C charge will
experience at point X. (1)
[11]
Ceiling QUESTION 7
Two identical spherical balls, P and Q, each of mass 100 g, are suspended at
the same point from a ceiling by means of identical light, inextensible insulating
strings. Each ball carries a charge of +250 nC. The balls come to rest in the
20° 20° positions shown in the diagram.
7.1 In the diagram, the angles between each string and the vertical are
the same. Give a reason why the angles are the same. (1)
7.2 State Coulomb's law in words. (2)
P Q 7.3 The free-body diagram, not drawn to
scale, of the forces acting on ball P is T
shown below.
Calculate the:
7.3.1 Magnitude of the tension (T) in the string (3)
7.3.2 Distance between balls P and Q (5)
[11] Fe

QUESTION 8 w/Fg
A sphere Q1, with a charge of -2,5 μC, is placed 1 m away from a second sphere
Q2, with a charge +6 μC. The spheres lie along a straight line, as shown in the
diagram below. Point P is located a distance of 0,3 m to the left of sphere Q1, while point X is located between Q1
and Q2. The diagram is not drawn to scale.
-2,5 μC +6 μC
P Q 1 X Q2
● ●
0,3 m 1m

8.1 Show, with the aid of a VECTOR DIAGRAM, why the net electric field at point X cannot be zero. (4)
8.2 Calculate the net electric field at point P, due to the two charged spheres Q1 and Q2. (6)
[10]
QUESTION 9
A small sphere, Q1, with a charge of + 32 x 10-9 C, is suspended from a light string secured to a support.
A second, identical sphere, Q2, with a charge of
– 55 x 10-9 C, is placed in a narrow, cylindrical glass
support tube vertically below Q1. Each sphere has a mass of 7 g.
string Both spheres come to equilibrium when Q2 is 2,5 cm
from Q1, as shown in the diagram. Ignore the effects
of air friction.
+ 9.1 Calculate the number of electrons that were
Q1 = + 32 x 10-9 C removed from Q1 to give it a charge of
+ 32 x 10-9 C. Assume that the sphere was
2,5 cm neutral before being charged. (3)
Glass tube
9.2 Draw a labelled free-body diagram showing
- all the forces acting on sphere Q1. (3)
Q2 = – 55 x 10-9 C 9.3 Calculate the magnitude of the tension in the
string. (5)
[11]
QUESTION 10
10.1 Define electric field at a point in words. (2)
10.2 Draw the electric field pattern for two identical positively charged spheres placed close to
each other. (3)
10.3 A – 30 μC point charge, Q1, is placed at a distance of 0,15 m from a + 45 μC point charge,
Q2, in space, as shown in the diagram below. The net electric field at point P, which is on the same
line as the two charges, is zero.
Q2 = + 45 μC Q1 = – 30 μC P
⚫
0,15 m x
Calculate x, the distance of point P from charge Q1. (5)
[10]
Terms, definitions, questions & answers 42
Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 11
In the diagram below, Q1, Q2 and Q3 are three stationary point
charges placed along a straight line. The distance between Q1
and Q2 is 1,5 m and that between Q2 and Q3 is 1 m, as shown in
the diagram.
11.1 State Coulomb's law in words. (2)
11.2 The magnitude of charges Q1 and Q2 are unknown. The charge on Q1 is positive. The charge
on Q3 is +2 x 10-6 C and it experiences a net electrostatic force of 0,3 N to the left.

11.2.1 Write down the sign (POSITIVE or NEGATIVE) of charge Q2. (2)

Charge Q2 is now removed. The magnitude of the electrostatic force experienced by

charge Q3 due to Q1 now becomes 0,012 N.

11.2.2 Calculate the magnitudes of the unknown charges Q1 and Q2. (7)
[11]
QUESTION 12
12.1 In an experiment to verify the relationship between the electrostatic force, F E, and distance, r,
between two identical, positively charged spheres, the graph below was obtained.
1
Graph of Fe versus
r2

0,030 •

•
0,025
FE (N)

0,020

•
0,015
•

0,010
•

0,005 •

0
0 1 2 3 4 5 6
(m-2)
12.1.1 State Coulomb's law in words. (2)
12.1.2 Write down the dependent variable of the experiment. (1)
12.1.3 What relationship between the electrostatic force FE and the square of the distance, r2,
between the charged spheres can be deduced from the graph? (1)
12.1.4 Use the information in the graph to calculate the charge on each sphere. (6)

12.2 A charged sphere, A, carries a charge of – 0,75 µC.

12.2.1 Draw a diagram showing the electric field lines surrounding sphere A. (2)

Terms, definitions, questions & answers 43

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

Sphere A is placed 12 cm away from another charged sphere, B, along a straight line in a vacuum, as
shown below. Sphere B carries a charge of +0,8 μC. Point P is located 9 cm to the right of sphere A.
12 cm
– 0,75 µC P + 0,8 µC
●
A 9 cm B
12.2.2 Calculate the magnitude of the net electric field at point P. (5)
[17]
QUESTION 13
Two small identical spheres, A and B, each carrying a charge of
+5 µC, are placed 2 m apart. Point P is in the electric field due to
the charged spheres and is located
1,25 m from sphere A. Study the diagram.
13.1 Describe the term electric field. (2)
13.2 Draw the resultant electric field pattern due to the two charged spheres. (3)
13.3 Calculate the magnitude of the net electric field at point P. (5)
[10]
QUESTION 14
14.1 A metal sphere A, suspended from a wooden beam by means of a non-conducting string, has a charge
of +6 µC.
14.1.1 Were electrons ADDED TO or REMOVED FROM the sphere to obtain this charge?
Assume that the sphere was initially neutral. (1)
14.1.2 Calculate the number of electrons added to or removed from the sphere. (3)
14.2 Point charges Q1, Q2 and Q3 are arranged
at the corners of a right-angled triangle, as Q3 = 6 µC
N
shown in the diagram. The charges on Q1
and Q2 are + 2 µC and – 2 µC respectively r r W E
and the magnitude of the charge on Q3 is 45°
6 µC. The distance between Q1 and Q3 is r. S
The distance between Q2 and Q3 is also r. The Q1 = + 2 μC Q2 = – 2 μC
charge Q3 experiences a resultant electrostatic
force of 0,12 N to the west.
14.2.1 Without calculation, identify the sign (positive or negative) on the charge Q3. (1)
14.2.2 Draw a vector diagram to show the electrostatic forces acting on Q3 due to charges Q1 and Q2
respectively. (2)
14.2.3 Write down an expression, in terms of r, for the horizontal component of the electrostatic force
exerted on Q3 by Q1. (3)
14.2.4 Calculate the distance r. (4)
14.3 The magnitude of the electric field is 100 N·C-1 at a point which is 0,6 m away from a point charge Q.
14.3.1 Define the term electric field at a point in words. (2)
14.3.2 Calculate the distance from point charge Q at which the magnitude of the electric field
is 50 N∙C-1. (5)
[21]
QUESTION 15
Two small spheres, X and Y, carrying charges of +6 x 10-6 C
and +8 x 10-6 C respectively, are placed 0,20 m apart in air.

15.1 State Coulomb's law in words. (2)

15.2 Calculate the magnitude of the electrostatic force experienced by charged sphere X. (4)

Terms, definitions, questions & answers 44

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

A third sphere, Z, of unknown negative charge, is

now placed at a distance of 0,30 m below sphere Y,
in such a way that the line joining the charged
spheres X and Y is perpendicular to the line joining
the charged spheres Y and Z, as shown in the diagram
alongside.
15.3 Draw a vector diagram showing the directions
of the electrostatic forces andthe net force
experienced by charged sphere Y due to the
presence of charged spheres X and Z
respectively. (3)
15.4 The magnitude of the net electrostatic force
experienced by charged sphere Y is 15,20 N.
Calculate the charge on sphere Z. (4)
[13]
QUESTION 16
A and B are two small spheres separated by a distance of
0,70 m. Sphere A carries a charge of +1,5 x 10-6 C and
sphere B carries a charge of -2,0 x 10-6 C. P is a point
between spheres A and B and is 0,40 m from sphere A, as
shown in the diagram.
16.1 Define the term electric field at a point. (2)
16.2 Calculate the magnitude of the net electric field at point P. (4)
16.3 A point charge of magnitude 3,0 x 10-9 C is now placed at point P. Calculate the magnitude of the
electrostatic force experienced by this charge. (3)
[9]
QUESTION 17
Two point charges, P and S, are placed a distance
0,1 m apart. The charge on P is +1,5 x 10-9 C and
that on S is -2 x 10-9 C. A third point charge, R,
with an unknown positive charge, is placed 0,2 m to the right of point charge S, as shown in the diagram.
17.1 State Coulomb's law in words. (2)
17.2 Draw a labelled force diagram showing the electrostatic forces acting on R due to P and S. (2)
17.3 Calculate the magnitude of the charge on R, if it experiences a net electrostatic force of 1,27 x 10-6 N
to the left. Take forces directed to the right as positive. (7)
[11]
QUESTION 18
P is a point 0,5 m from charged sphere A. The electric field at P is
3 x 107 N∙C-1 directed towards A. Refer to the diagram.
18.1 Draw the electric field pattern due to charged sphere A.
Indicate the sign of the charge on the sphere in your diagram. (2)
18.2 Calculate the magnitude of the charge on sphere A. (3)
18.3 Another charged sphere, B, having an excess of 105 electrons, is now placed at point P. Calculate the
electrostatic force experienced by sphere B. (6)
[11]
QUESTION 19
A particle, P, with a charge of + 5 x 10-6 C, is located
1,0 m along a straight line from particle V, with a
charge of +7 x 10-6 C. Refer to the diagram.
A third charged particle, Q, at a point x metres away from P, as shown above, experiences a net electrostatic
force of zero newton.
19.1 How do the electrostatic forces experienced by Q due to the charges on P and V respectively,
compare with each other? (2)
19.2 State Coulomb's law in words. (2)
19.3 Calculate the distance x. (5)
[9]
QUESTION 20
A small metal sphere Y carries a charge of + 6 x 10-6 C.
20.1 Draw the electric field pattern associated with sphere Y. (2)
20.2 If 8 x 1013 electrons are now transferred to sphere Y, calculate the electric field at a point 0,5 m from
the sphere. (7)
[9]

Terms, definitions, questions & answers 45

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 21
Three small identical metal spheres, P, S and T, on insulated stands, are initially neutral. They are then
charged to carry charges of -15 x 10-9 C,
Q and +2 x 10-9 C respectively, as shown.
The charged spheres are brought together
so that all three spheres touch each other
at the same time, and are then separated.
The charge on each sphere, after
separation, is -3 x 10-9 C.
21.1 Determine the value of charge Q. (2)
21.2 Draw the electric field pattern associated with the charged spheres, S and T, after they are separated
and returned to their original positions. (3)
The spheres, each with the new charge of -3 x 10-9 C,
are now placed at points on the x-axis and the y-axis,
as shown in the diagram, with sphere P at the origin.
21.3 State Coulomb's law in words. (2)
21.4 Calculate the magnitude of the net electrostatic
force acting on sphere P. (5)
21.5 Calculate the magnitude of the net electric field at
the origin due to charges S and T. (3)
21.6 ONE of the charged spheres, P and T, experienced a
very small increase in mass after it was charged initially.
21.6.1 Which sphere, P or T, experienced this very small increase in mass? (1)
21.6.2 Calculate the increase in mass by the sphere in QUESTION 21.6.1. (3)
[19]
QUESTION 22
Two point charges, q1 and q2, are placed 30 cm apart along a
straight line. Charge q1 = –3 x 10-9 C. Point P is 10 cm to the left of
q1, as shown in the diagram below. The net electrostatic field at
point P is zero.
22.1 Define the term electric field at a point. (2)
22.2 State, giving reasons, whether point charge q2 is POSITIVE or NEGATIVE. (3)
22.3 Calculate the magnitude of charge q2. (4)
22.4 State Coulomb's law in words. (2)
22.5 Calculate the magnitude of the electrostatic force exerted by charge q1 on charge q2. (3)
22.6 The two charges are now brought into contact with each other and are then separated. A learner draws
the electric field pattern for the new charges q3 and q4 after contact, as shown below.

22.7 Is the diagram CORRECT? Give a reason for the answer. (2)
[16]
QUESTION 23
23.1 A small sphere, Y, carrying an unknown charge, is suspended at the end of a light inextensible string
which is attached to a fixed point. Another sphere, X, carrying a charge of +6 x10-6 C, on an insulated
stand is brought close to sphere Y.
Sphere Y experiences an electrostatic force and comes to
rest 0,2 m away from sphere X, with the string at an angle
of 10° with the vertical, as shown in the diagram.
23.1.1 What is the nature of the charge on sphere Y? Choose
from POSITIVE or NEGATIVE. (1)
23.1.2 Calculate the magnitude of the charge on
sphere Y if the magnitude of the electrostatic force
acting on it is 3,05 N. (3)
23.1.3 Draw a labelled free-body diagram for sphere Y. (3)
23.1.4 Calculate the magnitude of the tension in the
string. (3)
Terms, definitions, questions & answers 46
Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

23.2 Two small charged spheres, A and B, on insulated stands, with charges +2 x10-5 C and -4 x10-5 C
respectively, are placed 0,4 m apart, as shown in the diagram below. M is the midpoint between
spheres A and B.

23.2.1 Define the term electric field at a point. (2)

23.2.2 Calculate the net electric field at point M. (6)
[18]
QUESTION 24
Two small, charged spheres, A and B, are placed on
insulated stands, 0,2 m apart, as shown in the
diagram. They carry charges of −4 x 10-6 C and
+3 x 10-6 C respectively.

M is a point that is a distance of 0,1 m to the right of sphere B.

24.1 Calculate the number of electrons in excess on sphere A. (3)
24.2 Calculate the magnitude of the electrostatic force exerted by sphere A on sphere B. (3)
24.3 Describe the term electric field. (2)
24.4 Calculate the magnitude of the net electric field at point M. (5)

Charged spheres A and B and another charged sphere D are now

arranged along a rectangular system of axes, as shown in the
diagram. The net electrostatic force experienced by sphere A is
7,69 N in the direction as shown in the diagram.

24.5 Is the charge on sphere D POSITIVE or NEGATIVE? (1)

24.6 Calculate the magnitude of the charge on sphere D. (3)
[17]

QUESTION 25
Two charged spheres, R and S, are both stationary on a smooth,
insulated surface inclined at an angle of 25° to the horizontal.
Sphere S, of mass 0,01 kg and carrying a charge of –6 x 10-9 C,
is connected to a 0,03 m long, light inextensible string attached
to point P at the top of the incline. Sphere R, carrying a charge
of +5 x 10-9 C, is held such that the distance between the centres
of the spheres is r, as shown in the diagram. Ignore the effects of
friction. Sphere R exerts an electrostatic force of magnitude
1,2 x 10-3 N on sphere S.
25.1 State Coulomb's law in words. (2)
25.2 Calculate the distance r between the spheres. (3)
25.3 Draw a labelled free-body diagram for sphere S. (4)
25.4 Calculate the:
25.4.1 Tension in the string (4)
25.4.2 Net electric field at point P (5)
[18]
QUESTION 26
26.1 A small neutral sphere acquires a charge of -1,95 x 10-6 C.
26.1.1 Were electrons ADDED TO or REMOVED FROM the sphere? (1)
26.1.2 Calculate the number of electrons which were added or removed. (3)
26.1.3 Define the term electric field at a point. (2)
26.1.4 Calculate the magnitude of the electric field at a point 0,5 m from the centre of the charged
sphere. (3)

Terms, definitions, questions & answers 47

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

26.2 Two point charges, q1 and q2, are fixed 0,02 m apart. The magnitude of charges q1 and q2 is the same
and q1 is NEGATIVELY charged. The small charged sphere with the charge of -1,95 x 10-6 C is placed
at point P, 0,03 m east of charge q2, as shown in the diagram below. The sphere at point P
experiences a net electrostatic force of 1,38 N west.

Calculate the magnitude of the charge on q2. (5)

[14]
QUESTION 27
27.1 Two small, identical spheres, P and T, are placed a distance of 0,1 m apart,
as shown in the diagram on the right. P carries a charge of +3 x 10-6 C and
T carries a charge of -3 x 10-6 C.
27.1.1 State Coulomb's law in words. (2)
27.1.2 Draw the resultant electric field pattern due to the charges
on P and T. (3)

A third charged sphere S

of unknown charge Qs is
placed a distance of
0,15 m from sphere T
such that the three charged spheres are at the
vertices of a right-angled triangle. The net
electrostatic force on sphere T due to the other
two charged spheres has a magnitude of 10 N,
as shown in the diagram on the left.

27.1.3 Is charge Qs POSITIVE or NEGATIVE? (1)

27.1.4 Calculate the number of electrons added to or removed from sphere S to give it a charge
of Qs. (6)
27.2 P is a variable point in the electric field of charged sphere A and r is the
distance between point P and the centre of sphere A. See the diagram
on the right. A learner determines the magnitude of the electric field (E)
at point P for different values of r. Sphere A is then replaced by another
sphere, B, of a different charge. Another set of results are obtained. The graphs below are obtained
from the results for sphere A and sphere B. EA is the magnitude of the electric field at a distance of
0,04 m from the centre of charged sphere A.

Use the graphs to answer the following questions.

1
27.2.1 State the proportionality between the magnitude of electric field E at a point and 2. (1)
𝑟
27.2.2 Calculate EA if the numerical value of the gradient of the graph for sphere A is 680. (4)

Terms, definitions, questions & answers 48

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

27.2.3 How does the magnitude of the charge on sphere B compare to the magnitude of the
charge on sphere A? Choose from GREATER THAN, SMALLER THAN or EQUAL TO.
Give a reason for the answer. (3)
[20]
QUESTION 28
A charged sphere M is suspended from
Diagram 1
a ceiling by a light inextensible, insulated
string. Another charged sphere N, of mass
2,04 x 10-3 kg and carrying a charge of
+8,6 x 10-8 C, hangs STATIONARY vertically
below sphere M. The centres of the spheres
are 0,3 m apart, as shown in diagram 1.
28.1 State Coulomb's law in words. (2)
28.2 State whether the charge on
sphere M is POSITIVE or
NEGATIVE. (1) Diagram 2
28.3 Draw a labelled free-body
diagram for sphere N. (2)
28.4 Calculate the magnitude of the
charge on sphere M. (5)
28.5 How does the electrostatic force
that sphere M exerts on sphere N
compare to that exerted by sphere N
on sphere M with respect to:
28.5.1 Magnitude (1)
28.5.2 Direction (1)
28.6 Point X is 0,1 m vertically below the centre of sphere N, as shown in diagram 2. Calculate the net
electric field at point X. (5)
[17]

ELECTRIC CIRCUITS
QUESTION 1
1.1 A group of learners conduct an experiment to determine the emf (ε) and internal resistance (r) of a battery.
They connect a battery to a rheostat (variable resistor), a low-resistance ammeter and a high-resistance
voltmeter as shown in the diagram below. The data obtained from the experiment is displayed in the table
below.

r READING ON READING ON
VOLTMETER (V) AMMETER (A)
● 2 0,58
A S
● 3 0,46
4 0,36
5 0,24
6 0,14

V
1.1.1 State ONE factor which must be kept constant during the experiment. (1)
1.1.2 Using the information in the table above, plot the points and draw the line of best fit on a graph
paper. (3)

Use the graph drawn in QUESTION 1.1.2 to determine the following:

1.1.3 Emf (ε) of the battery (1)
1.1.4 Internal resistance of the battery, WITHOUT USING ANY FORM OF THE EQUATION
ε = I(R + r) (3)

Terms, definitions, questions & answers 49

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

1.2 Three electrical devices, X, Y and Z, are connected to a 24 V battery with internal resistance r as
shown in the circuit diagram. The power rating of each of the devices X and Y are indicated in the
diagram.
r

 =24 V ● S1
A ●

20 V, 100 W
X

150 W
Y

● ● Z
S2
With switch S1 closed and S2 open, the devices function as rated. Calculate the:
1.2.1 Current in X (3)
1.2.2 Resistance of Y (3)
1.2.3 Internal resistance of the battery (5)

Now switch S2 is also closed.

1.2.4 Identify device Z which, when placed in the position shown, can still enable X and
Y to operate as rated. Assume that the resistances of all the devices remain
unchanged. (1)
1.2.5 Explain how you arrived at the answer to QUESTION 1.2.4. (2)
[22]
QUESTION 2
2.1 Learners want to construct an electric heater using one of two wires, A and B, of different
resistances. They conduct experiments and draw the graphs as shown.
Graph of V versus I for resistors A and B
10,0

8,0
A
●
●
V (volts)

6,0

●
B
4,0
● ●
●

2,0 ● ●
●
●

● 0,6 1,0
0 0,2 0,4 0,8 I (A)

2.1.1 Apart from temperature, write down TWO other factors that the learners should consider to
ensure a fair test when choosing which wire to use. (2)
2.1.2 Assuming all other factors are kept constant, state which ONE of the two wires will be the
most suitable to use in the heater. Use suitable calculations to show clearly how you arrive at
the answer. (8)

Terms, definitions, questions & answers 50

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

2.2 In the circuit below the reading on ammeter A is 0,2 A. The battery has an emf of 9 V and internal
resistance r.
2.2.1 Calculate the current through the
r 5,5 Ω resistor. (3)
=9V • 2.2.2 Calculate the internal resistance
S• of the battery. (7)
11 Ω

2.2.3 Will the ammeter reading INCREASE,

DECREASE or REMAIN THE SAME if
11 Ω A •
• the 5,5 Ω resistor is removed? Give a
reason for the answer. (2)
5,5 Ω
[22]
QUESTION 3
A cell of unknown internal resistance, r, has emf ( ε ) of 1,5 V. It is V
connected in a circuit to three resistors, a high-resistance  = 1,5 V
voltmeter, a low-resistance ammeter and a switch S as shown. S
When switch S is closed, the voltmeter reads 1,36 V. r ● ●
3.1 Which terminal of the ammeter is represented by
point P? Write down POSITIVE or NEGATIVE. (1) P
4Ω A 2Ω
3.2 Calculate the ammeter reading. (3)
3.3 Determine the internal resistance of the cell. (7)
3.4 An additional resistor X is connected parallel to the 3Ω
3 Ω resistor in the circuit. Will the reading on the ammeter
INCREASE, DECREASE or REMAIN UNCHANGED? Give a reason for the answer. (4)
[15]
QUESTION 4
A battery with an internal resistance of 1 Ω and an unknown emf (ε) is connected in a circuit, as shown below. A
high-resistance voltmeter (V) is connected across the battery. A1 and A2 represent ammeters of negligible
resistance.
8Ω
● ● A1 20 Ω
16 Ω
● ●

R A2
S●
●
ε
● r=1Ω ●

V
With switch S closed, the current passing through the 8 Ω resistor is 0,5 A.
4.1 State Ohm's law in words. (2)
4.2 Calculate the reading on ammeter A1. (4)
4.3 If device R delivers power of 12 W, calculate the reading on ammeter A2. (5)
4.4 Calculate the reading on the voltmeter when switch S is open. (3)
[14]
QUESTION 5
A battery of an unknown emf and an internal resistance of 0,5 Ω
V is connected to three resistors, a high-resistance voltmeter and
1 an ammeter of negligible resistance, as shown. The reading on
2Ω the ammeter is 0,2 A.

5.1 Calculate the:

0,5 Ω 5.1.1 Reading on the voltmeter (3)
ε 5.1.2 Total current supplied by the battery (4)
A
5.1.3 Emf of the battery (5)
4Ω 8Ω

5.2 How would the voltmeter reading change if the 2 Ω resistor is removed? Write down INCREASE,
DECREASE or REMAIN THE SAME. Explain the answer. (3)
[15]

Terms, definitions, questions & answers 51

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 6
6.1 In the diagram below, three light bulbs, A, B and C, are connected in parallel to a 12 V source
of negligible internal resistance. The bulbs are rated at 4 W, 6 W and 10 W respectively and
are all at their maximum brightness.

12 V A B C
4W 6W 10 W

6.1.1 Calculate the resistance of the 4 W bulb. (3)

6.1.2 How will the equivalent resistance of the circuit change if the 6 W bulb burns out?
Write down only INCREASES, DECREASES or NO CHANGE. (1)
6.1.3 How will the power dissipated by the 10 W bulb change if the 6 W bulb burns out? Write down
only INCREASES, DECREASES or NO CHANGE. Give a reason for the answer. (2)
6.2 A learner connects a high-resistance voltmeter across a battery. The voltmeter reads 6 V.
She then connects a 6 Ω resistor across the battery. The voltmeter now reads 5 V.

6.2.1 Calculate the internal resistance of the battery. (4)

6Ω The learner now builds the circuit alongside, using the same
6 V battery and the 6 Ω resistor. She connects an unknown
● resistor X in parallel with the 6 Ω resistor. The voltmeter now
X reads 4,5 V.
ε 6.2.2 Define the term emf of a cell. (2)
r
6.2.3 Calculate the resistance of X when the voltmeter
reads 4,5 V. (5)
[17]
4,5 V

QUESTION 7
7.1 In the circuit below the battery has an emf (ε) of 12 V and an internal resistance of 0,2 Ω. The resistances
of the connecting wires are negligible.
10 Ω

R 15 Ω
● c
●a
S ●b ●d

ε = 12 V
0,2 Ω

7.1.1 Define the term emf of a battery. (2)

7.1.2 Switch S is open. A high-resistance voltmeter is connected across points a and b.
What will the reading on the voltmeter be? (1)
7.1.3 Switch S is now closed. The same voltmeter is now connected across points c and d.
What will the reading on the voltmeter be? (1)

When switch S is closed, the potential difference across the terminals of the battery is 11,7 V.
Calculate the:
7.1.4 Current in the battery (3)
7.1.5 Effective resistance of the parallel branch (2)
7.1.6 Resistance of resistor R (4)

Terms, definitions, questions & answers 52

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

7.2 A battery with an emf of 12 V and an internal resistance of 0,2 Ω are connected in series to a very
small electric motor and a resistor, T, of unknown resistance, as shown in the circuit below. The motor
is rated X watts, 3 volts, and operates at optimal conditions. When switch S is closed, the motor lifts a
0,35 kg mass vertically upwards at a constant speed of 0,4 m∙s-1. Assume that there is no energy
conversion into heat and sound.

T
Electric motor
● ●
S
●
● 0,4 m∙s-1

ε = 12 V
0,35 kg
0,2 Ω

7.2.1 Calculate the value of X. (3)

7.2.2 Calculate the resistance of resistor T. (5)
[21]
QUESTION 8
8.1 The emf and internal resistance of a certain battery were determined experimentally.
The circuit used for the experiment is shown in the diagram below.
8.1.1 State Ohm's law in words. (2)

The data obtained from the experiment

is plotted on the graph sheet alongside.
8.1.2 Draw the line of best fit through the plotted points. Ensure that the line cuts both axes. (2)
Use information in the graph to answer QUESTIONS 8.1.3 and 8.1.4.
8.1.3 Write down the value of the emf (ε) of the battery. (1)
8.1.4 Determine the internal resistance of the battery. (3)
8.2 The circuit diagram shows a battery with an emf
(ε) of 60 V and an unknown internal resistance r,
connected to three resistors. A voltmeter
connected across the 8 Ω resistor reads 21,84 V.
Calculate the:
8.2.1 Current in the 8 Ω resistor (3)
8.2.2 Equivalent resistance of the
resistors in parallel (2)
8.2.3 Internal resistance r of the battery .... (4)
8.2.4 Heat dissipated in the external
circuit in 0,2 seconds (3)
[20]
Terms, definitions, questions & answers 53
Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 9
9.1 In Circuit 1, three identical light bulbs, P, Q and R, with the same resistance, are connected to a battery
with emf ε and negligible internal resistance.
P Q
9.1.1 How does the brightness of bulb P compare with that
of bulb Q? Give a reason. (2)
R 9.1.2 How does the brightness of bulb P compare with that
Circuit 1 of bulb R? Give a reason. (2)

P Q

A fourth, identical bulb T, with the same resistance as R

the other three, is connected to the circuit by means of Circuit 2 T
an ordinary wire of negligible resistance, as shown in
Circuit 2.
9.1.3 How does the brightness of bulb T compare with
that of bulb R? Give a reason for the answer. (2)
9.2 A battery with an emf of 20 V and an internal ε = 20 V
resistance of 1 Ω is connected to three resistors, 1Ω
as shown in the circuit alongside.

Calculate the:
9.2.1 Current in the 8 Ω resistor (6) 5Ω 10 Ω
9.2.2 Potential difference across the
5 Ω resistor (4)
9.2.3 Total power supplied by the battery (3)
[19] 8Ω
QUESTION 10
10.1 Learners investigated the relationship between potential difference (V) and current (I) for the
combination of two resistors, R1 and R2.

In one experiment, resistors R1 and R2 were

connected in parallel.

In a second experiment, resistors R1 and R2

were connected in series.

The learners then plotted graph X, the results of

one of the experiments, and graph Y, the results
of the other experiment, as shown.

10.1.1 State Ohm's law in words. (2)

10.1.2 What physical quantity does the
gradient (slope) of the V-I graph
represent? (1)
10.1.3 Calculate the gradient (slope) of
graph X. (2)
10.1.4 Determine the resistance of
resistor R1. (4)

Terms, definitions, questions & answers 54

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

10.2 The circuit below consists of three resistors, M, N and T, a battery with emf Ɛ and an internal resistance
of 0,9 Ω. The effective resistance between points a and b in the circuit is 6 Ω. The resistance of resistor
T is 1,5 Ω. When switch S is closed, a high-
resistance voltmeter, V1, across a and b
reads 5 V.

Calculate the
10.2.1 Current delivered by the battery (3)
10.2.2 Emf (Ɛ) of the battery (4)

V2 reads 2,5 V when the switch is closed.

10.2.3 Write down the resistance of N.

(No calculations required.)
Give a reason for the answer. (2)
[18]

QUESTION 11
11.1 The two graphs alongside show the relationship between
current and potential difference for two different conductors,
X and Y.

11.1.1 State Ohm’s law in words. (2)

11.1.2 Which ONE of the two conductors, X or Y, is ohmic?

Refer to the graph and give a reason for the answer. (2)

11.2 In the diagram below, a battery with an emf of 6 V and an internal resistance of 2 Ω, is connected to
three resistors P, Q and R. A voltmeter V is connected across the battery. The ammeter A has a
negligible resistance.

11.2.1 Calculate the ammeter reading when switch S is closed. (5)

The switch S is now open.

11.2.2 Will the ammeter reading in QUESTION 11.2.1 INCREASE, DECREASE or REMAIN
THE SAME? Give a reason for the answer. (2)
11.2.3 How will the voltmeter reading now compare with the voltmeter reading when the
switch is closed? Choose from INCREASE, DECREASE or REMAIN THE SAME. (1)
11.2.4 Explain the answer to QUESTION 11.2.3. (3)
[15]

Terms, definitions, questions & answers 55

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 12
12.1 In the circuit diagram below the battery has an unknown emf (ε) and an internal resistance (r)
of 0,8 Ω.
12.1.1 State Ohm’s law in words. (2)

The reading on ammeter A2 is 0,6 A when

switch S is closed. Calculate the:

12.1.2 Reading on voltmeter V1 (3)

12.1.3 Current through the 6 Ω resistor (2)
12.1.4 Reading on voltmeter V2 (2)
12.1.5 Emf (ε) of the battery (3)
12.1.6 Energy dissipated as heat inside the
battery if the current flows in the circuit
for 15 s (3)

12.2 A simplified circuit diagram for the windscreen wiper of a car consists of a variable resistor and a
wiper motor connected to a 12 volt battery. When switch S is closed, the potential difference across
the variable resistor is 2,8 V and the current passing through it is 0,7 A.

12.2.1 Calculate the resistance of the variable

resistor. (2)

The resistance of the variable resistor is now decreased.

12.2.2 State whether the speed at which the wiper turns

will INCREASE, DECREASE or REMAIN THE
SAME. Give a reason for the answer. (3)
[20]

QUESTION 13
The battery in the circuit diagram below has an emf of 12 V and an internal resistance of 0,5 Ω. Resistor R has an
unknown resistance.
13.1 What is the meaning of the following statement?
The emf of the battery is 12 V. (2)

The reading on the ammeter is 2 A when switch S is OPEN.

Calculate the:
13.2 Reading on the voltmeter (3)
13.3 Resistance of resistor R (2)

Switch S is now CLOSED.

13.4 How does this change affect the reading on the
voltmeter? Choose from: INCREASES, DECREASES
or REMAINS THE SAME. Explain the answer. (4)
[11]

Terms, definitions, questions & answers 56

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 14
Learners perform an experiment to determine the emf (ε) and the internal resistance (r) of a battery using the
circuit below. The learners use their recorded readings of current and resistance, together with the equation
R = "𝜀" /"𝐼" – r, to obtain the graph below.

14.1 Which variable has to be kept

constant in the experiment? (1)

Refer to the graph.

14.2 Write down the value of the internal

resistance of the cell. (2)

14.3 Calculate the emf of the battery. (3)

[6]
QUESTION 15
15.1 Three identical light bulbs, A, B and C, are each rated at 6 W, 12 V.
15.1.1 Define the term power. (2)
15.1.2 Calculate the resistance of EACH bulb when used as rated. (3)

The light bulbs are connected in a circuit with a battery having an emf (ε) of 12 V and internal
resistance (r) of 2 Ω. Refer to the diagram.
Assume that the resistance of each light bulb is the
same as that calculated in QUESTION 15.1.2.
Switch S is closed.

15.1.3 Calculate the total current in the circuit. (5)

15.1.4 Calculate the potential difference across light
bulb C. (3)
15.1.5 Explain why light bulb C in the circuit will NOT
burn at its maximum brightness. (3)
15.2 Resistors A, B, C and D are connected to a battery having emf (ε) and negligible internal resistance, as
shown in the diagram below.

15.2.1 Give a reason why the current in resistor A is greater than that in resistor C. (2)
15.2.2 Resistor C is removed. How will the current in resistor B compare to the current in A? Give a reason
for the answer. (2)
[20]

Terms, definitions, questions & answers 57

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 16
In the circuit diagram, resistor R, with a resistance of 5,6 Ω, is
connected, together with a switch, an ammeter and a high-
resistance voltmeter, to a battery with an unknown internal
resistance, r.
The resistance of the connecting wires and the ammeter may be
ignored.

The graph below shows the potential difference across the

terminals of the battery as a function of time. At time t1, switch S is
closed.

16.1 Define the term emf of a battery. (2)

16.2 Write down the value of the emf of the battery. (1)
16.3 When switch S is CLOSED, calculate the:
16.3.1 Current through resistor R (3)
16.3.2 Power dissipated in resistor R (3)
16.3.3 Internal resistance, r, of the battery (3)

16.4 Two IDENTICAL resistors, each with resistance X, are now connected in the same circuit with switch S
closed, as shown below.

The ammeter reading now increases to 4 A.

16.4.1 How would the voltmeter reading change? Choose from INCREASES, DECREASES or
REMAINS THE SAME. Give a reason for the answer by referring to Vinternal resistance. (2)
16.4.2 Calculate resistance X. (5)
[19]
QUESTION 17
A battery with an internal resistance of 0,5 Ω and
an unknown emf (ε) is connected to three resistors,
a high resistance voltmeter and an ammeter of
negligible resistance, as shown in the circuit
diagram. The resistance of the connecting wires
must be ignored.
17.1 Define the term emf of a battery. (2)
The reading on the voltmeter DECREASES by
1,5 V when switch S is closed.
17.2 Give a reason why the voltmeter
reading decreases. (2)
17.3 Calculate the following when
switch S is closed:
17.3.1 Reading on the ammeter (3)
17.3.2 Total external resistance of the circuit (4)
17.3.3 Emf of the battery (3)
17.4 A learner makes the following statement: The current through resistor R3 is larger than the current
through resistor R2. Is this statement CORRECT? Choose from YES or NO. Explain the answer. (3)
17.5 The 4 Ω resistor is now removed from the circuit. How will this affect the emf of the battery? Choose
from INCREASES, DECREASES or REMAINS THE SAME. (1)
[18]

Terms, definitions, questions & answers 58

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 18
Three resistors are connected to a battery with an
unknown emf and unknown internal resistance r, as
shown. Ignore the resistance of the connecting wires.
18.1 In the definition of the emf of a battery given
below, (a) and (b) represent missing words or
phrases.
The emf of the battery is the maximum (a) …
supplied by a battery per (b) …. passing
through it.
Write down (a) and (b) in your ANSWER
BOOK and next to each the missing word
or phrase. (2)
With switch S CLOSED, the voltmeter reads 2,63 V.
18.2 Calculate the equivalent external resistance of
the circuit. (4)
Switch S is now OPENED and the voltmeter reads 2,8 V.
18.3 Calculate:
18.3.1 The internal resistance of the battery (8)
18.3.2 The emf of the battery (2)
[16]
QUESTION 19
The battery in the circuit shown below has an emf of 12 V and an unknown internal resistance r. The
resistance of the connecting wires and the ammeter is negligible.

Switch S is OPEN.
19.1 Write down the reading on:
19.1.1 Voltmeter V1 (1)
19.1.2 Voltmeter V2 (1)

Switch S is now CLOSED. The reading on the ammeter is 1,2 A and the power dissipated in resistor X is 5,76 W.
19.2 Define the term power. (2)
Calculate the:
19.3 Resistance of resistor X (3)
19.4 Total EXTERNAL resistance of the circuit (3)
19.5 Reading on voltmeter V2 (5)
A length of wire of negligible resistance is used to connect point P to point Q in the circuit.
19.6 How will the reading on voltmeter V1 be affected? Choose from INCREASES, DECREASES
or NO EFFECT. Explain the answer. (4)
[19]

Terms, definitions, questions & answers 59

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 20
In the circuit below a battery of UNKNOWN emf and an internal resistance of 0,5 Ω is connected to two
resistors of 4 Ω and 8 Ω each, and a resistor R of unknown resistance. Ignore the resistance of the connecting
wires.

20.1 The three external resistors are ohmic conductors. Explain the meaning of the term
ohmic conductor. (2)
20.2 When switch S is OPEN, voltmeter V1 reads 3,2 V. Calculate the:
20.2.1 Current through the battery (3)
20.2.2 Emf of the battery (4)
20.3 When switch S is CLOSED, voltmeter V2 reads 8,8 V.
20.3.1 Calculate the resistance of resistor R. (5)
20.3.2 The battery becomes heated when voltmeter V2 is replaced by a connecting wire. Explain
this observation. (3)
[17]
QUESTION 21 [N2022 Q8]
The circuit diagram shows four resistors connected to
a battery of emf Ɛ and internal resistance r. The
resistances of the ammeter and the connecting wires are
negligible, while the voltmeters have very high
resistances. Switch S is CLOSED.
21.1 State Ohm's law in words. (2)
21.2 The reading on the ammeter is 3,5 A.
21.2.1 Calculate the total external
resistance of the circuit. (4)
21.2.2 Calculate the reading on voltmeter V1. (3)
21.2.3 How does the reading on voltmeter V2
compare to the reading on voltmeter V1?
Choose from SMALLER THAN, EQUAL
TO or GREATER THAN. (1)
21.3 A learner concludes that the emf of the battery is equal to the reading on voltmeter V1.
21.3.1 Define the term emf. (2)
21.3.2 Is the learner's conclusion CORRECT? Choose from YES or NO. (1)
21.3.3 Give a reason for the answer to QUESTION 21.3.2. (1)

Switch S is now removed and replaced by voltmeter V2,

as shown in the circuit diagram on the right.
21.4 How will EACH of the following change?
(Choose from INCREASES, DECREASES
or REMAINS THE SAME.)
21.4.1 The power dissipated by
the 4 Ω resistor (1)
21.4.2 The reading on voltmeter V1 (1)
21.5 Explain the answer to QUESTION 21.4.2. (4)
[20]

Terms, definitions, questions & answers 60

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

ELECTRICAL MACHINES
QUESTION 1
The diagram represents a simplified version of an electrical machine used to
light up a bulb.

1.1 Name the principle on which the machine operates. (1)

1.2 State ONE way in which to make this bulb burn brighter. (1)
commutator
Some changes have been made to the machine and a new device
is obtained. The new device as well as the graph of output emf versus time
using this new device is shown below.

X 339,45

emf (V)
t (s)

brushes
1.3 Name part X in the new device. (1)
1.4 Define the term root mean square value of an AC voltage. (2)
1.5 Calculate the rms voltage. (3)
[8]
QUESTION 2
The graph below shows the output voltage from a household AC generator for one cycle of rotation
of the coils.
Output voltage (V)

340

t(s)

- 340

2.1 A 100 W light bulb is connected to this generator and it glows at its maximum brightness.
Use the information from the graph to calculate the:
2.1.1 Resistance of the bulb (5)
2.1.2 rms current through the bulb (3)
2.2 Give ONE reason why AC voltage is preferred to DC voltage for everyday use. (1)
[9]
QUESTION 3
3.1 The output potential difference of an AC generator is 100 V at 20 Hz. A simplified diagram of the
generator is shown below. The direction of the current in the coil is from a to b.
c b

d a

Terms, definitions, questions & answers 61

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

3.1.1 In which direction is the coil rotating? Write only CLOCKWISE or ANTICLOCKWISE. (1)
3.1.2 Starting from the position shown in the diagram, sketch a graph of the output potential
difference versus time when the coil completes TWO full cycles. On the graph, clearly indicate
the maximum potential difference (100 V) and the time taken to complete the twocycles. (3)
3.1.3 State ONE way in which this AC generator can be used to produce a lower output potential
difference. (1)
3.2 An electrical device is rated 220 V, 1 500 W. Calculate the maximum current output for the device
when it is connected to a 220 V alternating current source. (5)
[10]
QUESTION 4
4.1 A teacher demonstrates how current can be obtained using a bar
magnet, a coil and a galvanometer. The teacher moves the bar
magnet up and down, as shown by the arrow in the diagram.
galvanometer 4.1.1 Briefly describe how the magnet must be moved in
order to obtain a LARGE deflection on thegalvanometer.(2)

The two devices, A and B, below operate on the principle described in

QUESTION 4.1.1 above.
coil

output
output
4.1.2 Write down the name of the principle. (1)
4.1.3 Write down the name of part X in device A. (1)

4.2 A 220 V, AC voltage is supplied from a wall socket to an electric kettle of resistance 40,33 Ω. Wall
sockets provide rms voltages and currents.
Calculate the:
4.2.1 Electrical energy consumed by the kettle per second (4)
4.2.2 Maximum (peak) current through the kettle (3)
[11]
QUESTION 5
5.1 A simplified sketch of an AC Coil
generator is shown. The coil of the Q
generator rotates clockwise between
A
the pole pieces of two magnets. At a Pole piece of
particular instant, the current in the magnet P
segment PQ has the direction shown. 
To external circuit
5.1.1 Identify the magnetic pole A. 
Only write NORTH POLE or SOUTH POLE. (1)
5.1.2 The coil is rotated through 180°. Will the direction of the current in segment PQ be
from P to Q or Q to P? (1)
5.2 An electrical device is connected to a generator which produces an rms potential difference
of 220 V. The maximum current passing through the device is 8 A.
Calculate the:
5.2.1 Resistance of the device (5)
5.2.2 Energy the device consumes in two hours (5)
[12]

Terms, definitions, questions & answers 62

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 6
6.1 A part of a simplified DC motor is shown in the sketch.
6.1.1 In which direction (a to b OR b to a) is the current
flowing through the coil if the coil rotates anticlockwise
as indicated in the diagram? (1)
6.1.2 Name the rule you used to answer QUESTION 6.1.1. (1)
6.1.3 Which component in the diagram must be replaced in
order for the device to operate as an AC generator? (1)

6.2 An electrical device of resistance 400 Ω is connected across an AC generator that produces
a maximum emf of 430 V. The resistance of the coils of the generator can be ignored.
6.2.1 State the energy conversion that takes place when the AC generator is in operation. (2)
6.2.2 Calculate the root mean square value of the current passing through the resistor. (5)
[10]
QUESTION 7
7.1 A generator is shown here. Assume that the coil is in a vertical position.
7.1.1 Is the generator above AC or DC? Give a reason for
the answer. (2)
7.1.2 Sketch an induced emf versus time graph for ONE complete
rotation of the coil. (The coil starts turning from the vertical
position.) (2)
7.2 An AC generator is operating at a maximum emf of 340 V. It is
connected across a toaster and a kettle, as shown in the diagram. The
toaster is rated at 800 W, while the kettle is rated at 2 000 W. Both are
working under optimal conditions.
7.2.1 Calculate the rms current
passing through the toaster (3)

toaster
7.2.2 Calculate the total rms current

kettle
delivered by the generator. (4) generator
[11]
800 W 2 000 W
QUESTION 8
8.1 The diagram shows a simplified version
of a generator.
8.1.1 Write down the name of EACH part, R, T and X. (3)
8.1.2 Give the NAME of the law upon which the operation
of the generator is based. (1)
8.2 An AC supply is connected to a light bulb. The light bulb
lights up with the same brightness as it does when connected
to a 15 V battery.
8.2.1 Write down the rms value of the potential difference
of the AC supply. (1)
8.2.2 If the resistance of the light bulb is 45 Ω, calculate the
maximum current delivered to the light bulb. (4)
[9]
QUESTION 9
The diagram shows a simplified version of an AC generator.
9.1 Name the component in this arrangement that makes it
different from a DC generator. (1)
9.2 Sketch a graph of induced emf versus time for TWO
complete rotations of the coil. (2)
A practical version of the generator has a large number of turns
of the coil and it produces an rms potential difference of 240 V.
9.3 State TWO ways in which the induced emf can be
increased. (2)
9.4 Define the term root mean square (rms) value of an
AC potential difference. (2)
9.5 The practical version of the generator is connected
across an appliance rated at 1 500 W. Calculate the rms current passing through the appliance. (3)
[10]

Terms, definitions, questions & answers 63

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 10
10.1 The diagram shows different positions (ABCDA) of the coil in a DC generator for a complete revolution.
The coil is rotated clockwise at a constant speed in a
uniform magnetic field. The direction of the magnetic
field is shown in the diagram.
10.1.1 Write down the energy conversion that
takes place during the operation of the
DC generator (1)
10.1.2 Sketch a graph to show how the induced
emf of the generator varies with time.
Clearly indicate positions A, B, C, D and A
on the graph. (2)
10.2 A small AC generator, providing an rms voltage of 25 V, is
connected across a device with a resistance of 20 Ω. The
wires connecting the generator to the device have a total
resistance of 0,5 Ω. Refer to the diagram.
10.2.1 Write down the total resistance of the circuit. (1)
10.2.2 Calculate the average power delivered to the
device. (5)
[9]
QUESTION 11
11.1 Learners want to build a small DC motor as a project. Write down THREE essential components that
are needed for the building of the motor. (3)
11.2 An electrical device with a resistance of 11 Ω is connected to an AC source with an rms voltage of
240 V.
11.2.1 Define the term rms voltage. (2)
11.2.2 Calculate the maximum (peak) current passing through the device. (4)
[9]
QUESTION 12
12.1 The diagram is a simplified representation of a DC motor. The
current in the coil is in the direction XY.
12.1.1 Name the component that ensures that the coil
rotates continuously in ONE DIRECTION. (1)
12.1.2 In which direction will the coil rotate? Write down
only CLOCKWISE or ANTICLOCK-WISE. (2)
12.1.3 Write down the energy conversion which takes place
while the motor is working. (2)

12.2 An AC generator, producing a maximum voltage of 320 V, is

connected to a heater of resistance 35 Ω.
12.2.1 Write down the structural difference between an AC generator and a DC generator. (1)
12.2.2 Calculate the root mean square (rms) value of the voltage. (3)
12.2.3 Calculate the root mean square (rms) value of the current in the heater. (4)
[13]
QUESTION 13
13.1 In the simplified AC generator, the coil is rotated clockwise
13.1.1 In which direction does the induced current flow in the coil?
Choose from: X to Y or Y to X (1)
13.1.2 On which principle or law is the working of the generator
based? (1)
13.1.3 State the energy conversion that takes place while the
generator is in operation. (2)

Terms, definitions, questions & answers 64

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

13.2 The voltage output for an AC generator is shown below.

13.2.1 Write down the maximum (peak) output voltage of the generator. (1)

A stove is connected to the generator above, and delivers an average power of 1 600 W.
13.2.2 Calculate the rms voltage delivered to the stove. (3)
13.2.3 Calculate the resistance of the stove. (3)
[11]
QUESTION 14
The graph shows the voltage output of a generator. Diagrams A and B show the position of the generator at
different times.

14.1 Does this generator have split rings or slip rings? (1)
14.2 Which ONE of the diagrams below, A or B, shows the position of the generator's coil at
time = 0,10 s? (1)
14.3 Calculate the root mean square (rms) voltage for this generator. (3)
14.4 A device with a resistance of 40 Ω is connected to this generator. Calculate the:
14.4.1 Average power delivered by the generator to the device (3)
14.4.2 Maximum current delivered by the generator to the device (4)
[12]
QUESTION 15
15.1 A simplified diagram of an electric generator is shown.
When the coil is rotated with a constant speed, an
emf is induced in the coil.
15.1.1 Is this an AC generator or a DC generator? (1)
15.1.2 Briefly explain how an emf is generated in
the coil when the coil is rotated by referring to
the principle of electromagnetic induction. (2)
15.1.3 Draw a sketch graph of the output voltage
versus time for this generator. Show ONE
complete cycle. (2)

Terms, definitions, questions & answers 65

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

15.2 A 200 Ω resistor is connected to a DC voltage supply, as shown in diagram A. The energy dissipated in
the resistor in 10 s is 500 J. The same resistor is now connected to an AC source (diagram B) and 500 J
of energy is also dissipated in the resistor in 10 s.

15.2.1 Define the term rms voltage of an AC source. (2)

15.2.2 Calculate the maximum (peak) voltage of the AC source. (5)
[12]
QUESTION 16
16.1 A simplified diagram of an electrical machine is shown.
16.1.1 Is this machine a DC motor or a DC generator? (1)
16.1.2 Write down the energy conversion that takes
place while this machine is in operation. (2)
16.1.3 Write down the name of component A in the
diagram. (1)
16.1.4 In which direction will the coil, shown in the
diagram, rotate? Choose from
CLOCKWISE or ANTICLOCKWISE. (2)
16.2 An electrical device is marked 200 W; 220 V.
16.2.1 Define the term rms voltage. (2)
16.2.2 Calculate the resistance of the device. (3)
This device is now connected to a 150 V AC source.
16.2.3 Calculate the energy dissipated by the device in 10 minutes. (5)
[16]
QUESTION 17
The diagram is a simplified representation of an AC generator.
The coil is rotated in a clockwise direction in the magnetic field.
17.1 Write down the name of component X. (1)
17.2 Write down the function of component Y. (1)
17.3 Use the relevant principle to explain why an emf is
induced in the coil when the coil is rotated in the
magnetic field. (2)
17.4 The coil rotates CLOCKWISE from the position shown
in the diagram. In which direction will current be induced
in segment PQ of the coil? Choose from 'P to Q'
or 'Q to P'. (2)

The output voltage versus time graph was obtained for the
above generator. The output voltage is generated at
a frequency of 50 Hz.
17.5 Calculate the time t indicated in this
graph. (3)
17.6 The generator is now connected to
an appliance with a resistance of
100 Ω. Calculate the energy
dissipated when the appliance is
in operation for ONE minute. (5)
[14]

Terms, definitions, questions & answers 66

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 18
A simplified diagram of an AC generator connected to a 25 Ω
resistor is shown. The coil rotates anticlockwise.
18.1 Name the component that distinguishes this
generator from a DC generator. (1)
18.2 In which direction will the induced current flow in
section XY of the coil? Choose from X to Y
OR Y to X. (2)
The graph below shows the output voltage of the generator for
one cycle of rotation of the coil.

18.3 Define the term rms potential difference. (2)

18.4 Calculate the rms current in the circuit. (4)
18.5 Calculate the average power dissipated in the 25 Ω resistor. (3)
The speed of rotation of the coil in the generator is now DOUBLED.
18.6 Copy the set of axes below in your ANSWER BOOK and sketch the graph of output voltage versus
time for 0,1 s.

(3)
[15]
QUESTION 19
19.1 The simplified sketch of an electric
motor is shown on the right.
19.1.1 Write down the energy
conversion that takes
place in this motor. (1)
19.1.2 Is this motor an
AC motor or a DC
motor? (1)
19.1.3 What is the function of
the commutator in this
motor? (1)

Terms, definitions, questions & answers 67

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

19.2 A resistor Y is rated 220 V, 100 W and is connected to a 220 V AC

source, as shown in the circuit on the right.
19.2.1 Calculate the resistance of resistor Y. (3)
Another resistor Z with a rating 220 V, X W, is now connected in
series to resistor Y and to the same AC source. See the diagram below.

The power dissipated by resistor Y changes to 80 W, while its resistance remains constant.
19.2.2 Calculate the power rating X of resistor Z, assuming that resistor Z has constant resistance. (6)
[12]

QUESTION 20
20.1 The diagram shows the initial position of the coil in a simple DC
generator. The coil is rotated in an anticlockwise direction, as
shown.
20.1.1 Name the component in this generator that ensures
that the induced current in the external circuit is in
one direction only. (1)
20.1.2 Is the direction of the induced current from X to Y
or from Y to X? (1)
A maximum voltage of 90 V is generated when the coil is rotating
at a frequency of 20 Hz.
20.1.3 Write down the time taken for the coil to complete ONE rotation. (1)
20.1.4 The coil starts rotating from the initial position, as shown in the diagram. Sketch a graph of
output voltage versus time for one complete rotation of the coil. Indicate the maximum
voltage and the relevant time values on the graph. (4)
20.2 Wall sockets supply rms voltage and current. A 220 V AC voltage is supplied from a wall socket to
an electric kettle having a resistance of 32 Ω. Calculate the average energy dissipated by the kettle in
TWO minutes. (4)
[11]

OPTICAL PHENOMENA AND PROPERTIES OF MATERIALS

QUESTION 1
Ultraviolet light is incident onto a photocell with a potassium
incident light potassium cathode as shown.
cathode The threshold frequency of potassium is 5,548 x 10 14 Hz.
1.1 Define the term threshold frequency (cut-off
frequency). (2)
The maximum speed of an ejected photoelectron
e- e- is 5,33 x 105 m∙s-1.
1.2 Calculate the wavelength of the ultraviolet light
used. (5)
The photocell is now replaced by another photocell with
DC source a rubidium cathode. The maximum speed of the ejected
photoelectron is 6,10 x 105 m∙s-1 when the same
ultraviolet light source is used.
1.3 How does the work function of rubidium compare to that of potassium?
Write down only GREATER THAN, SMALLER THAN or EQUAL TO. (1)
1.4 Explain the answer to QUESTION 1.3. (3)
[11]

Terms, definitions, questions & answers 68

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 2
A learner uses photocells to determine the maximum Ultraviolet light
kinetic energy of ejected photoelectrons. One photocell Metal surface
has a caesium cathode and the other has a sodium
cathode. Each photocell is radiated by ultraviolet light from
the same source as shown below. e-
μA
The incomplete results obtained are shown in the table
below.

WORK FUNCTION OF THE MAXIMUM KINETIC ENERGY OF

NAME OF THE METAL
METAL (J) PHOTOELECTRONS (J)
Caesium 3,36 x 10-19 2,32 x 10-19
Sodium 3,65 x 10-19 EK

2.1 Define the term work function of a metal. (2)

2.2 Use the information in the table to calculate the wavelength of the ultraviolet light used in the
experiment. (4)
2.3 Calculate the maximum kinetic energy, EK, of an electron ejected from the sodium metal. (4)
2.4 The intensity of the incident ultraviolet light was then increased.
2.4.1 Give a reason why this change does NOT affect the maximum kinetic energy of the ejected
photoelectrons. (1)
2.4.2 How does the increased intensity affect the reading on the ammeter? Write down only
INCREASES, DECREASES or REMAINS THE SAME. (1)
2.4.3 Explain the answer to QUESTION 2.4.2. (2)
[14]

QUESTION 3 green
3.1 In the diagram, green and blue light are 500 nm blue
successively shone on a metal surface. In 400 nm
each case, electrons are ejected from the
surface.
3.1.1 What property of light is illustrated by the photoelectric effect? (1)
3.1.2 Without any calculation, give a reason why the maximum kinetic energy of an ejected
electron, using blue light, is GREATER THAN that obtained using green light, for the same
metal surface. (2)
3.2 The wavelength associated with the cut-off (threshold) frequency of a certain metal is 330 nm.
Calculate:
3.2.1 The work function of the metal (4)
3.2.2 The maximum speed of an electron ejected from the surface of the metal when light of
frequency 1,2 x 1015 Hz is shone on the metal (5)
[12]
QUESTION 4
In an experiment to demonstrate the photoelectric effect, light of different wavelengths was shone onto a metal
surface of a photoelectric cell. The maximum kinetic energy of the emitted electrons was determined for the
various wavelengths and recorded in the table below.
1 MAXIMUM KINETIC ENERGY
INVERSE OF WAVELENGTH ( × 106 m-1) Ek(max) ( × 10-19 J)
λ
5,00 6,60
3,30 3,30
2,50 1,70
2,00 0,70
4.1 What is meant by the term photoelectric effect? (2)
1
4.2 Draw a graph of Ek(max) (y-axis) versus (x-axis) on a graph paper. (3)
λ
4.3 USE THE GRAPH to determine:
4.3.1 The threshold frequency of the metal in the photoelectric cell (4)
4.3.2 Planck's constant (4)
[13]

Terms, definitions, questions & answers 69

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 5
An investigation was conducted to determine the effects of changes in Incident light
frequency AND intensity on the current generated in a photoelectric cell
when light is incident on it. The apparatus used in the investigation is
shown in the simplified diagram. µA
The results of the experiment are shown in the table below.

EXPERIMENT FREQUENCY (Hz) INTENSITY (Cd) CURRENT (A)

A 4,00 x 1014 10 0
B 4,50 x 1014 10 0
C 5,00 x 1014 10 0
D 5,01 x 1014 10 20
E 5,01 x 1014 20 40
F 6,50 x 1014 10 30
5.1 Define the term work function. (2)
5.2 Identify an independent variable. (1)
The threshold frequency for the metal used in the photocell is 5,001 x 1014 Hz.
5.3 Define the term threshold frequency. (2)
5.4 Calculate the maximum speed of an emitted electron in experiment F. (5)
In experiments D and E, the current doubled when the intensity was doubled at the same frequency.
5.5 What conclusion can be made from this observation? (2)
[12]
QUESTION 6
6.1 In an experiment on the photoelectric effect, light is incident on the surface of a metal and electrons
are ejected.
6.1.1 What does the photoelectric effect indicate about the nature of light? (1)
6.1.2 The intensity of the light is increased. Will the maximum speed of the ejected electrons
INCREASE, DECREASE or REMAIN THE SAME? Give a reason for the answer. (2)
The wavelength corresponding with the threshold frequency is referred to as threshold wavelength.
The table below gives the values of threshold wavelengths for three different metals.
METAL THRESHOLD WAVELENGTH (λ0) IN METRES
Silver 2,88 x 10-7
Calcium 4,32 x 10-7
Sodium 5,37 x 10-7

In the experiment using one of the metals above, the maximum speed of the ejected electrons was
recorded as 4,76 x 105 m·s-1 for light of wavelength 420 nm.
6.1.3 Identify the metal used in the experiment by means of suitable calculations. (5)

6.2 The simplified energy

E3 E3 diagrams showing the
Q possible electron transitions in
Increasing energy

Increasing energy

S R an atom are shown alongside.

E2 E2
P Using the letters P, Q, R and
E1 E1 S, identify the lines that
CORRECTLY show
transitions that will result in the
E0 atom giving off an
EMISSION SPECTRUM.
Give a reason for the answer. (4)
[12]

Terms, definitions, questions & answers 70

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 7
7.1 A learner is investigating the
photoelectric effect for two different
metals, silver and sodium, using sodium
silver

EKmax (J)
light of different frequencies. The
maximum kinetic energy of the
emitted photoelectrons is plotted
against the frequency of the light for
each of the metals, as shown in the
graphs below.
Frequency x 1014 (Hz)
0
5,94 11,42

7.1.1 Define the term threshold frequency. (2)

7.1.2 Which metal, sodium, or silver, has the larger work function? Explain the answer. (3)
7.1.3 Name the physical constant represented by the slopes of the graphs. (1)
7.1.4 If light of the same frequency is shone on each of the metals, in which metal will the ejected
photoelectrons have a larger maximum kinetic energy? (1)
7.2 In a different photoelectric experiment blue light obtained from a light bulb is shone onto a metal plate
and electrons are released. The wavelength of the blue light is 470 x 10-9 m and the bulb is rated at
60 mW. The bulb is only 5% efficient.
7.2.1 Calculate the number of photons that will be incident on the metal plate per second, assuming
all the light from the bulb is incident on the metal plate. (5)
7.2.2 Without any further calculation, write down the number of electrons emitted per second from
the metal. (1)
[13]
QUESTION 8
A simplified diagram of an apparatus for
an experiment to investigate the photo-
electric effect is shown alongside. Light of
fixed frequency is incident on the cathode
of a photoelectric tube.
During the experiment the ammeter (A)
registers the photocurrent.

8.1 Define the term photoelectric effect. (2)

The intensity of the incident light is now

increased.

8.2 State how this increase in intensity will affect the reading on the ammeter. Choose from INCREASE,
DECREASE or REMAIN THE SAME. Give a reason for the answer. (3)
When the frequency of the incident light is 5,9 x 1014 Hz, the maximum recorded kinetic energy of
photoelectrons is 2,9 x 10-19 J.
8.3 Calculate the maximum wavelength (threshold wavelength) of the incident light that will emit an
electron from the cathode of the photo-electric tube. (5)
The maximum kinetic energy of the photoelectrons ejected increases when light of a higher frequency is used.
8.4 Use the photoelectric equation to explain this observation. (2)
[12]
QUESTION 9
The graph is obtained for an experiment on the photoelectric effect
using different frequencies of light and a given metal plate.
The threshold frequency for the metal is 6,8 x 1014 Hz.
Ekmax. (J)

9.1 Define the term threshold frequency. (2)

In the experiment, the brightness of the light incident on the
metal surface is increased.
9.2 State how this change will influence the speed of the
photoelectrons emitted. Choose from INCREASES,
DECREASES or REMAINS UNCHANGED. (1)
9.3 Show by means of a calculation whether the photoelectric
0 6,8 effect will be OBSERVED or NOT OBSERVED, if
f (x 1014 Hz)
monochromatic light with a wavelength of 6 x 10-7 m is used
in this experiment. (5)

Terms, definitions, questions & answers 71

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

One of the radiations used in this experiment has a frequency of 7,8 x 1014 Hz.
9.4 Calculate the maximum speed of an ejected photoelectron. (5)
[13]
QUESTION 10
10.1 A teacher in a science class explains how
different types of spectra are obtained. The
teacher uses the simplified diagrams shown
alongside for the explanation.
Name the type of spectrum of:
10.1.1 Y (1)
10.1.2 Z (1)

10.2 In an excited atom, electrons can 'jump' from

lower energy levels to higher energy levels.
They can also 'drop' from higher energy levels
to lower energy levels. The diagram (not
drawn to scale) shows some of the transitions
for electrons in an excited atom.

10.2.1 Do the transitions indicated in the diagram

lead to ABSORPTION or EMISSION spectra? (1)
10.2.2 Calculate the frequency of the photon produced
when an electron in an excited atom makes a
transition from E4 to E2, as shown in the
diagram. (4)
The threshold frequency of a metal, Q, is 4,4 x 1014 Hz.
10.2.3 Calculate the kinetic energy of the most
energetic electron ejected when the photon
produced in QUESTION 10.2.2 is incident on
the surface of metal Q. (4)
Another metal, R, has a threshold frequency of 7,5 x 1014 Hz.
10.2.4 Will the photon produced in QUESTION 10.2.2 be able to eject electrons from the surface of
metal R? Write down only YES or NO. Give a reason for the answer. (2)
[13]
QUESTION 11
11.1 In the diagram, monochromatic light is incident on the metal plate of a photocell. A sensitive ammeter
shows a reading.
11.1.1 How does the energy of the photons of the
incident light compare to the work function of
the metal plate? Choose from GREATER
THAN, LESS THAN or EQUAL TO. Give a
reason for the answer. (2)
11.1.2 When a change is made to the monochromatic
light, the reading on the ammeter increases. A
learner makes the following statement with
regard to this change:
The increase in the ammeter reading is due to
an increase in the energy of the incident
photons. Give a reason why this statement is
INCORRECT. (2)
11.1.3 What does the photoelectric effect tell us about the nature of light? (1)
11.2 Ultraviolet radiation is incident on the surface of sodium metal. The threshold frequency (f 0)
for sodium is 5,73 x 1014 Hz. The maximum speed of an electron emitted from the metal
surface is 4,19 x105 m∙s-1.
11.2.1 Define or explain the term threshold frequency. (2)
11.2.2 Calculate the work function of sodium. (3)
11.2.3 Calculate the frequency of the incident photon. (3)
[13]

Terms, definitions, questions & answers 72

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 12
A group of students investigates the relationship between the work function of different metals and the maximum
kinetic energy of the ejected electrons when the metals are irradiated with light of suitable frequency.
12.1 Define the term work function. (2)
During the investigation ultraviolet rays of wavelength 2 x 10-8 m are allowed to fall on different
metal plates. The corresponding maximum kinetic energies of ejected electrons are measured.
The data obtained is displayed in the table below.

METAL PLATE MAXIMUM KINETIC ENERGY (Ek(max))

USED (x 10-18 J)
Lead 9,28
Potassium 9,58
Silver 9,19

12.2 Write down the dependent variable for this investigation. (1)
12.3 Write down ONE control variable for this investigation. (1)
12.4 Using the information in the table, and without any calculation, identify the metal with the
largest work function. Explain the answer. (3)
12.5 Use information in the table to calculate the work function of potassium. (4)
12.6 State how an increase in the intensity of the ultraviolet light affects the maximum kinetic energy of the
photoelectrons. Choose from INCREASES, DECREASES, REMAINS THE SAME. Explain the answer.(3)
[14]
QUESTION 13
The threshold frequencies of caesium and potassium metals are given in the table below.
METAL THRESHOLD FREQUENCY
Caesium 5,07 x 1014 Hz
Potassium 5,55 x 1014 Hz
13.1 Define the term work function in words. (2)
13.2 Which ONE of the two metals in the table has the higher work function? Give a reason for
the answer by referring to the information in the table. (2)
The simplified diagrams below show two circuits, A and B, containing photocells. The photocell in circuit A
contains a caesium metal plate, while the photocell in circuit B contains a potassium metal plate. Ultraviolet light
with the same intensity and wavelength of 5,5 x 10-7 m is incident on the metal plate in EACH of the photocells
and the ammeter in circuit A registers a current.

13.3 By means of a calculation, determine whether the ammeter in circuit B will also register a current. (3)
13.4 Calculate the maximum kinetic energy of an ejected electron in circuit A. (5)
13.5 How will the maximum kinetic energy of the ejected electron, calculated in QUESTION13.4, change
when the intensity of the incident light increases? Choose from: INCREASES, DECREASES or
REMAINS THE SAME . (1)
[13]

Terms, definitions, questions & answers 73

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 14
A potassium metal plate is irradiated with light of wavelength 5 x 10 -7 m in an arrangement, as shown below. The
threshold frequency of potassium is 5,55 x 1014 Hz.

14.1 Define the term threshold frequency. (2)

14.2 Calculate the energy of a photon incident on the metal plate. (3)
14.3 Using a suitable calculation, prove that the ammeter will show a reading. (4)
14.4 The intensity of the light is now increased. Explain why this change causes an increase in the
ammeter reading. (3)
[12]
QUESTION 15
During an experiment, light of different frequencies is radiated onto a silver cathode of a photocell and the
corresponding maximum speed of the ejected photoelectrons are measured.
A graph of the energy of the incident photons versus the square of the maximum speed of the ejected
photoelectrons is shown below.

15.1 Define the term photoelectric effect. (2)

Use the graph to answer the following questions.

15.2 Write down the value of the work function of silver. Use a relevant equation to justify the answer. (3)
15.3 Which physical quantity can be determined from the gradient of the graph? (1)
15.4 Calculate the value of X as shown on the graph. (5)

The experiment above is now repeated using light of higher intensity.

15.5 How will EACH of the following be affected? Choose from INCREASES, DECREASES or REMAINS
THE SAME.
15.5.1 The gradient of the graph (1)
15.5.2 The number of photoelectrons emitted per unit time (1)
[13]

Terms, definitions, questions & answers 74

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 16
An experiment is conducted to investigate the
relationship between the frequency of light incident on
a metal and the maximum kinetic energy of the emitted
electrons from the surface of the metal. This
experiment is conducted for three different metals. The
graph represents the results obtained.
16.1 Name the phenomenon on which this
experiment is based. (1)
16.2 Name the physical quantity represented
by X on the graph. (1)
16.3 Which ONE of the three metals needs
incident light with the largest wavelength
for the emission of electrons? Give
a reason for the answer. (2)
16.4 Define the term work function in words. (2)
16.5 Calculate the:
16.5.1 Work function of platinum (3)
16.5.2 Frequency of the incident light that will emit electrons from the surface of platinum with
a maximum velocity of 5,60 x 105 m∙s-1 (4)
[13]
QUESTION 17
When light of various frequencies is incident on the metal cathode of a photocell, photoelectrons are emitted
from the surface of the cathode. The graph below shows the relationship between the maximum kinetic energy
(Ek(max)) of an emitted photoelectron and the wavelength of the incident light.

17.1 Use the graph to determine the maximum kinetic energy of the emitted photoelectron when the
wavelength of the incident light is 1,0 x 10-7 m. (1)
17.2 What relationship between the maximum kinetic energy of the emitted photoelectron and the
wavelength of the incident light can be deduced from the graph? (2)
17.3 Define the term work function in words. (2)
17.4 Use the graph to calculate the work function of the metal used as cathode of this photocell. (4)
17.5 Calculate the maximum kinetic energy of the emitted photoelectron when the wavelength of the
incident light is 0,5 x 10-7 m. (4)
[13]

Terms, definitions, questions & answers 75

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

QUESTION 18
The relationship between frequency (f) and maximum kinetic
energy (Ek(max)) of photoelectrons emitted from two cathodes, M
and N, of different photoelectric cells is investigated. The
graphs have been obtained from the results.
18.1 Define the term threshold frequency. (2)
18.2 How does the maximum kinetic energy of
photoelectrons emitted from cathode N compare to
the maximum kinetic energy of those emitted from
cathode M when light of a frequency greater than
10,40 x 1014 Hz is shone on each of the cathodes?
Choose from GREATER THAN, SMALLER THAN or
EQUAL TO. (2)
18.3 Calculate the value of frequency fx indicated on the
graph. (5)
18.4 The experiment is now repeated for cathode M using
light of frequency fx, but of higher intensity. How will EACH of the following be affected? Choose from
INCREASES, DECREASES or NO EFFECT.
18.4.1 The y-intercept of the graph (1)
18.4.2 The number of photoelectrons emitted per unit time (1)
18.4.3 The maximum kinetic energy of the emitted photoelectrons (1)
[12]
QUESTION 19
19.1 The apparatus illustrated in the simplified diagram below is used to demonstrate the photoelectric effect.

19.1.1 Define the term photoelectric effect. (2)

Incident light of frequency 1,2 x 1015 Hz is shone onto the metal plate and electrons are emitted.
Calculate the:
19.1.2 Number of photoelectrons emitted in one second if the total energy transferred by the light to
the metal plate per second is 1,75 x 10-9 J (4)
19.1.3 Maximum speed of a photoelectron if the threshold frequency of the metal plate
is 9,09 x 1014 Hz (5)
19.2 Briefly explain how an emission spectrum is formed in terms of energy transitions. (2)
[13]
QUESTION 20
Light is incident on the cathode of a photoelectric cell connected to
a battery and a sensitive ammeter, as shown. The cathode has
a work function of 3,42 x 20-19 J. Light of frequency 5,96 x 1014 Hz
is shone onto the cathode.
20.1 What conclusive evidence about the nature of light is
provided by the photoelectric effect? (1)
20.2 Define the term work function. (2)
20.3 Calculate the maximum kinetic energy of an electron
ejected from the cathode. (4)
20.4 The ammeter registers a constant current of 0,012 A.
Calculate the minimum number of photons of light that strike the cathode in a 10 s period. (4)
20.5 The intensity of the incident light is now INCREASED. How will this change affect the reading on
the ammeter? Choose from INCREASES, DECREASES or REMAINS THE SAME. Explain the
answer. (3)
[14]

Terms, definitions, questions & answers 76

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

NUMERICAL ANSWERS

NEWTON’S LAWS
1.3 200 N 2.3.1 2,46 N 2.3.2 32,04 N 3.2.1 10,42 N
3.2.2 59,09 N 3.4 38,58 N 3.5 25,37 N 4.1.2 24,5 N
4.1.3 12,5 kg 4.1.4 2,29 m∙s-2 4.2 12,89 N 5.1.1 7,06 m∙s-2
5.1.2 9,20 m∙s-1 5.1.3 6m 5.2.2 9,8 N 6.2 0N
6.4 0,21 7.2 4,41 N 7.4.1 4,08 N 7.4.2 13,19 N
8.1.2 15 N 8.1.3 13,45 N 8.1.4 4,82 m∙s-2 9.1 0N
9.3.1 2,39 N 9.3.2 0,12 9.3.3 0,96 m 10.1.3 59,57 N
10.1.4 7,45 m∙s-2 10.2.2 4,41 x 1022 kg 11.3 9,24 N 11.4 3s
12.2 0,11 m∙s-2 12.3 29,07 N 12.5 18,82 N 13.3.2 16,96 N
13.3.3 5,82 N 14.1.3 68,94 N 14.1.4 101,11 N 14.2 1,08 x 1022 kg
15.3 1,85 m∙s-2 16.3 3,25 kg 17.3 19,6 N 17.4.1 2,04 m∙s-2
17.4.2 23,68 N 18.3 116 N 18.5 0,34 m 19.3 466,72 N
19.5 679,20 N 20.3.1 1,925 N 20.3.2 54,55° - 54,78°

VERTICAL MOTION
1.2 3,06 s 1.3 22,95 m 2.2 12,65 m∙s-1 2.3 38,16 m
3.1 5,88 m∙s-1 3.2 17,84 m 3.3 2,9 s 3.4 0,44 m
3.5 34,45 m 4.1 3,27 s 4.3 11,25 m 5.1.1 29,73 m∙s-1
5.1.2 1,83 s 5.1.3 15,62 m∙s-1 6.2 6,12 s 6.3 25,08 m
6.4 8,05 m∙s-1 7.2 19,08 m∙s-1 7.3 2,02 s 8.2.1 14,10 m
8.2.2 19,41 m∙s-1 8.2.3 12,52 m∙s-1 9.3 2s 9.4 17,4 m
10.1 1,22 s 10.2 6,00 m∙s-1 10.3 43,76 m 11.1 10 m∙s-1
11.3 39,6 m 11.4 10,55 s 11.5.1 0,2 s 11.5.2 4,96 s
11.5.3 -27 m∙s-1 12.2 9,8 m 12.3 13,86 m∙s-1 12.4 47,32 N
13.2 0,77 s 14.2.1 14,99 m∙s -1 14.2.2 11,47 m 15.2 45,10 m
15.4 1,34 s 16.2.1 0,03 s 16.2.2 0,62 s 16.2.3 6,08 m∙s-1
16.2.4 4,85 m∙s-1 17.2 9,8 m∙s-2 17.3 3m 17.4.1 10 m∙s-1
17.4.2 8,1 m 17.5 -1,28 J 18.2.1 2,96 m∙s-1 18.2.2 6,70 s
18.2.3 14,16 m 19.2.1 1,53 s 19.2.2 41,48 m 19.3 1,71 s
20.2.1 1,22 s - 1,23 s 20.2.2 25,03 m∙s-1 - 25,59 m∙s-1 20.2.3 0,07 s - 0,08 s

MOMENTUM AND IMPULSE

1.1 250 kg∙m∙s-1 1.3 1 250 N 2.2 3 500 kg∙m∙s-1 2.3 437,5 N
3.2 0,39 J 3.3 1,64 m∙s-1 3.4 0,72 N∙s 4.1 210 m∙s-1
4.2 1 102,5 N 5.2.1 6 m∙s-1 5.2.2 8N 6.2.1 2,5 m∙s-1
6.2.2 66,67 N 7.2.1 20 m∙s-1 7.2.2 2,78 m∙s-1 7.2.3 160 000 N
8.3 2,21 N 9.2.1 21 kg∙m∙s-1 9.2.2 77 N 9.3 77 N
10.2 306,67 m∙s-1 10.3 0,71 m 11.2 2,23 m∙s-1 11.3 4,48 N∙s
12.1 6,26 m∙s-1 12.3 2,68 m∙s-1 12.4 8,04 m 13.3 51,33 kg
13.4 32 N∙s 13.5 32 kg∙m∙s-1 14.2 6,23 m∙s-1 15.2.1 0,05 kg
15.2.2 2 000 N 16.2.1 3 m∙s-1 16.2.2 2,4 N∙s 17.2 3v
18.2 4 m∙s-1 18.3 200 N 19.2.2 1,38 kg 20.2.1 9,6 m∙s-1
20.2.2 48 N

WORK, ENERGY AND POWER

1.1.3 48,95 N 1.2.1 506,26 N 1.2.2 874,38 W 2.1 9,90 m∙s-1
2.4 33,43° 3.3 148,17 N 3.4 2,98 m∙s-1 4.1 2 560 W
4.4 8,37 m∙s-1 5.5 388,88 N 6.2.1 -300 J 6.2.2 8,25 m∙s-1
6.3 1 030 W 7.1 24,50 J 7.2 0,67 m 7.4 -10,7 J
8.1 2,39 m∙s-1 8.3 838,89 m∙s-1 9.3 9,95 m∙s-1 9.4 -623,75 W
10.2.1 -646 800 J 10.2.2 512 050 J 10.3 748,61 W 11.3 94,08 J
11.4 3,71 m∙s-1 12.2 7,67 m∙s-1 12.4 33,95 N 12.5 10,05 m∙s-1
13.3 -8 820 J 13.5 3,95 m∙s-1 14.3 5,33 x 104 W 14.5 -1,39 x 106 J
15.4 -712,88 J 15.5 4,52 m∙s-1 15.6 -1 425,76 J 16.4 26,46 J
16.5 -12,87 J 17.2 -1 200 J 17.3 8,88 m 17.4 1 814,35 W
18.2 1 184,17 W 18.6 284 089 N 19.2 9,90 m∙s-1 19.3 8,2 N
19.4 7J 20.3 96,64 m 21.3 559,575 J 21.4 13,32 m

Terms, definitions, questions & answers 77

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

DOPPLER EFFECT
1.1.3 20,01 m∙s-1 2.1.1 0,65 m 2.1.2 0,63 m 3.2 330 m∙s-1 (Or alternatives)
4.1.4 336,15 m∙s-1 5.1 333 m∙s-1 5.2.2 12 m∙s-1 6.3 438,71 Hz
6.4 0,85 m 7.1.2 1 214,29 Hz 7.1.3 1 331,80 Hz 8.2 3 m∙s-1
8.3.2 345 m∙s-1 8.3.3 1 200 Hz 8.3.4 295 K 9.1.2 32,60 m∙s-1
10.1.3 66,44 m∙s-1 11.2.1 170 Hz 11.2.2 130 Hz 11.3 45,33 m∙s-1
12.3 20,90 m∙s-1 13.2 0,23 m 14.3 1 000 Hz 14.4 170 m
15.1.1 30 m∙s-1 15.1.4 849,76 Hz 16.3 588,24 Hz 16.4 20 m∙s-1
17.3 70 m∙s-1 17.4 5s 18.2.1 700 Hz 18.2.3 334,93 m∙s-1
19.1 0,5 m 19.4 34 m∙s-1 20.2 0,39 m 20.3 897,44 Hz / 905,88 Hz
21.4 20,4 m∙s-1

ELECTROSTATICS
1.2 2 µC 1.5 1,35 N 1.7 1,35 x 106 N∙C-1 2.2.1 2 x 10-6 C
2.2.2 1,25 x 1013 2.3.2 3,89 x 1013 3.2 13,83 N 4.1 -8 x 10-13 C
4.2 +8 x 10-13 C 4.4 0,60 N∙C-1 5.1 3,13 x 10 12 5.4 0,83 N
6.1 6,08 x 10 N∙C
6 -1 6.2 1,22 x 10-2 N 6.3 2,44 x 10-2 N
7.3.1 1,04 N 7.3.2 0,04 m 8.2 281 952,66 N∙C-1 9.1 2 x 1011
9.3 9,39 x 10-2 N 10.3 0,67 m 11.2.2 1,6 x 10-5 C 12.1.4 7,32 x 10-7 C
12.2.2 8,83 x 106 N∙C-1 13.3 5,12 x 104 N∙C-1 14.1.2 3,75 x 1013
14.2.4 1,128 m 14.3.2 0,85 m 15.2 10,8 N 15.4 1,34 x 10-5 C
16.2 2,84 x 105 N∙C-1 16.3 8,52 x 10 N
-4 17.3 4,23 x 10-9 C
18.2 8,33 x 10-4 C 18.3 4,80 x 10-7 N 19.3 0,46 m 20.2 2,45 x 105 N∙C-1
21.1 4 x 10 C
-9 21.4 8,15 x 10-6 N 21.5 2,72 x 10 N∙C
3 -1 21.6.2 2,85 x 10-20 kg
22.3 4,80 x 10 C
-8 22.5 1,44 x 10-5 N 23.1.2 2,26 x 10 C
-6 23.1.4 17,56 N
23.2.2 1,35 x 107 N∙C-1 24.1 2,5 x 1013 24.2 2,7 N
24.4 2,3 x 106 N∙C-1 24.6 4,5 x 10-6 C 25.2 0,015 m 25.4.1 0,04 N
25.4.2 3,78 x 104 N∙C-1 26.1.2 1,22 x 1013 26.1.4 7,02 x 104 N∙C-1
26.2 1,11 x 10-7 C 27.1.4 3,05 x 1013 27.2.2 4,25 x 10 N∙C
5 -1

28.4 2,32 x 10 C - 2,33 x 10-6 C

-6 28.6 5,31 x 104 N∙C-1 - 5,37 x 104 N∙C-1

ELECTRIC CIRCUITS
1.1.3 7,2 V 1.1.4 9Ω 1.2.1 5A 1.2.2 2,67 Ω
1.2.3 0,32 Ω 2.2.1 0,4 A 2.2.2 0,33 Ω 3.2 0,23 A
3.3 0,21 Ω 4.2 0,75 A 4.3 0,63 A 4.4 20,38 V
5.1.1 2,4 V 5.1.2 1,4 A 5.1.3 3,11 V 6.1.1 36 Ω
6.2.1 1,20 Ω 6.2.3 9Ω 7.1.2 12 V 7.1.3 0V
7.1.4 1,5 A 7.1.5 6Ω 7.1.6 1,8 Ω 7.2.1 1,37 W
7.2.2 19,37 Ω 8.1.3 5,5 V 8.1.4 1,2 Ω 8.2.1 2,73 A
8.2.2 12 Ω 8.2.3 1,98 Ω 8.2.4 29,81 J 9.2.1 1,62 A
9.2.2 5,42 V 9.2.3 32,4 W 10.1.3 4Ω 10.1.4 2Ω
10.2.1 0,83 A 10.2.2 7V 10.2.3 3Ω 11.2.1 0,33 A
12.1.2 2,4 V 12.1.3 0,4 A 12.1.4 5,8 V 12.1.5 9V
12.1.6 12 J 12.2.1 4Ω 13.2 11 V 13.3 5,5 Ω
14.2 3Ω 14.3 7V 15.1.2 24 Ω 15.1.3 0,32 A
15.1.4 3,78 V 16.2 13 V 16.3.1 1,88 A 16.3.2 19,69 W
16.3.3 1,31 Ω 16.4.2 1,49 Ω 17.3.1 3A 17.3.2 13,38 Ω
17.3.3 41,64 V 18.2 3,5 Ω 18.3.1 0,49 Ω 18.3.2 3V
19.1.1 12 V 19.1.2 0V 19.3 4Ω 19.4 7,5 Ω
19.5 3V 20.2.1 0,8 A 20.2.2 10 V 20.3.1 5,28 Ω
21.2.1 4,83 Ω 21.2.2 16,91 V - 16,92 V

ELECTRICAL MACHINES
1.5 240,03 V 2.1.1 578 Ω 2.1.2 0,417 A 3.2 9,65 A
4.2.1 1 200,10 W 4.2.2 7,71 A 5.2.1 38,87 Ω 5.2.2 8,97 x 106 J
6.2.2 0,76 A 7.2.1 3,33 A 7.2.2 11,65 A 8.2.1 15 V
8.2.2 0,47 A 9.5 6,25 A 10.2.1 20,5 Ω 10.2.2 29,75 W
11.2.2 30,86 A 12.2.2 226,27 V 12.2.3 6,46 A 13.2.1 340 V
13.2.2 240,42 V 13.2.3 36,13 Ω 14.3 220,62 V 14.4.1 1 216,83 W
14.4.2 7,8 A 15.2.2 141,42 V 16.2.2 242 Ω 16.2.3 5,58 x 104 J
17.5 0,03 s 17.6 2,90 x 104 J 18.4 2,83 A 18.5 200 W
19.2.1 484 Ω - 494 Ω 19.2.2 846 W - 848 W 20.1.3 0,05 s 20.2 181 500 J - 181 764 J

Terms, definitions, questions & answers 78

Physical Sciences P1 (Physics) Grade 12 © Free State Department of Education 2023

OPTICAL PHENOMENA AND PROPERTIES OF MATERIALS

1.2 4 x 10-7 m 2.2 3,50 x 10-7 m 2.3 2,03 x 10-19 J 3.2.1 6,03 x 10-19 J
3.2.2 6,5 x 10 m∙s 4.3.1 4,8 x 1014 Hz
5 -1 4.3.2 6,47 x 10-34 J∙s 5.4 4,67 x 105 m∙s-1
7.2.1 7,09 x 1015 J 7.2.2 7,09 x 1015 J 8.3 1,97 x 10-6 m 9.4 3,82 x 105 m∙s-1
10.2.2 6,17 x 10 Hz 10.2.3 1,17 x 10-19 J
14 11.2.2 3,8 x 10-19 J 11.2.3 9,94 x 1014 Hz
12.5 3,65 x 10-19 J 13.4 2,55 x 10-20 J 14.2 3,98 x 10-19 J 15.4 0,9868
16.5.1 1,16 x 10 J 16.5.2 1,97 x 1015 Hz
-18 17.1 11,6 x 10-19 J 17.4 4,06 x 10-19 J
17.5 3,57 x 10-18 J 18.3 4,51 x 1015 Hz 19.1.2 2,198 x 109 19.1.3 6,51 x 105 m∙s-1
20.3 5,30 x 10-20 J - 5,32 x 10-20 J 20.4 7,5 x 1017

oooooOOOooooo

Terms, definitions, questions & answers 79