Data Sheet

ACX500, ACX1000, ACX2000, AND

ACX4000 UNIVERSAL METRO
ROUTERS DATASHEET

Product Description
Juniper Networks® ACX Series Universal Metro Routers are Juniper’s response to a shift in
metro network architecture, where the access and aggregation layers are extending the
operational intelligence from the service provider edge to the access network. The ACX
Product Overview
Series simplifies access and aggregation architectures by eliminating unnecessary layers and
ACX500, ACX1000, ACX2000, network overlays, dramatically reducing CapEx and OpEx. Based on architectural
and ACX4000 Universal Metro simplification and cost reduction, the ACX Series enables service providers and enterprises
Routers add operational to adopt the true universal metro paradigm. In addition to Metro Ethernet Forum (MEF)
intelligence to metro CE2.0 compliance for supporting both Ethernet and IP/MPLS, the ACX Series provides high
environments, providing the capacity, scalability, and a secure packet optical transport layer, while delivering industry-
option to deploy packet optical, leading performance with a wide range of port densities and interface types.
metro Ethernet, or IP/MPLS
Table 1 provides an overview of the interfaces supported on the ACX500, ACX1000,
infrastructure. High-precision
ACX2000, and ACX4000 platforms. Flexibility and upgradability (the ability to mix and
synchronization technology,
match interface types) makes the ACX Series ideal for a wide range of use cases.
industry-leading security, and
high availability features
enhance QoE, while extensive ACX Series Product Family
OAM, built-in advanced SLA
The ACX Series Universal Metro Routers family includes multiple models, all targeted at
management, and zero touch
different applications.
deployment capabilities reduce
TCO. The ACX500, ACX1000, • ACX500: The ACX500 is a small form factor, hardened fanless router that delivers up
ACX2000, and ACX4000 to 60 Gbps throughput. It is ideal for small cell, LTE-Advanced mobile backhaul
platforms address a variety of deployments, as well as use cases in the industrial environment. An ACX500-O version
service provider use cases, is available for outdoor deployment.
including business, cable • ACX1000: The ACX1000 is a 1 U fanless router that delivers up to 60 Gbps through a
distributed access architectures, fixed configuration of eight T1/E1 interfaces, eight copper 10/100/1000 GbE ports,
residential fiber, and mobile and four GbE combination fiber/copper ports. It is designed for enterprise and service
backhaul, as well as enterprise
provider cabinet and tower deployments.
applications for power utilities,
• ACX1100: The compact, 1 U, environmentally hardened ACX1100 is an Ethernet-only
oil and gas, mining,
access router with a fixed configuration of eight copper GbE 10/100/1000 Mbps
transportation, and defense and
interfaces, and four GbE copper/fiber combination ports. It provides 60 Gbps
public safety industries.
performance, programmability, and a fanless passive cooling system that makes it ideal
for external cabinet or tower installations.
• ACX2100: The ACX2100 features fanless passive cooling and a fixed port
configuration that includes 16 T1/E1 interfaces, four copper 10/100/1000 Mbps
interfaces, four combination copper/fiber GbE ports, two GbE small form-factor
pluggable transceiver (SFP) ports, and two 10GbE SFP+ transceiver ports.

1
 ACX500, ACX1000, ACX2000, and ACX4000 Universal Metro Routers Datasheet

• ACX2200: The ACX2200 is a compact, Ethernet only, precision timing, advanced security features, and enhanced SLA
environmentally hardened router with fanless passive cooling management capabilities.
and a fixed-port configuration featuring four copper
The ACX Series supports all mobile services profiles including
10/100/1000 Mbps interfaces, four combination copper/fiber
2G/3G high-speed packet access (HSPA), 4G LTE, LTE-Advanced,
GbE ports, two GbE SFP ports, and two 10 GbE SFP+ ports,
and small cell. In a typical backhaul deployment scenario, the
making it ideal for IP-RAN deployments.
ACX500 is used as a small cell router and grandmaster, whereas the
• ACX4000: The 2.5 U ACX4000 offers two Modular Interface
ACX1000 line, ACX2000 line, or ACX4000 are macro cell site
Card (MIC) slots that can house 16 T1/E1 ports, 6 GbE
routers.
copper/fiber combination ports, or 4 CHOC3/STM-1 ports.
The platform also provides a number of fixed ports that include
2x10GbE, 2xGbE SFP, or 8xGbE copper/fiber combination. It Enterprise Networking and Field Area Network
is optimized to enhance the mobile subscriber experience As enterprises and governments are embarking on their digital
while significantly improving network monetization for service transformation journey, they need to deploy and upgrade their
providers. mission-critical communication networks, some of which are
located in demanding and harsh environments such as field area
The environmentally hardened small form factor ACX Series
networks for providing supervisory control and data acquisition
platforms deliver comprehensive routing and security services,
(SCADA) system connectivity. These include power utilities, oil and
application awareness and control, with high availability to ensure
gas, mining, rail and transportation, defense and public safety
business continuity and resiliency, and they are perfect choices for
industries, and so on.
supporting such mission-critical communications networks. The
ACX Series enables seamless migration from legacy TDM/SONET
to Ethernet/IP, with support for legacy services. Architecture and Key Components
Powered by Juniper Networks Junos® operating system, ACX Series
Mobile Haul routers complement Juniper Networks MX Series 3D Universal
Edge Routers through a flexible and scalable service provider and
The accelerating speed of innovation is forcing mobile operators to
enterprise branch routing portfolio optimized to support rapidly
migrate to LTE-Advanced and 5G capabilities. LTE-Advanced and
growing mobile, video, and cloud computing applications. The ACX
5G place more stringent requirements for capacity, latency,
Series introduces Juniper’s proven IP/MPLS leadership from core
synchronization, and security on the network infrastructure.
and edge into the access layers of the network. Maintaining relative
Supporting 1GbE/10GbE interfaces and throughput in a variety of
simplicity in the access network, the ACX Series supports a rich
small form factors starting at 60 Gbps, the ACX Series satisfies LTE-
suite of L2, L3, and IP/MPLS functionality to allow large-scale
Advanced and 5G capacity requirements. In addition to high
seamless MPLS networks with simplified service provisioning and
capacity and density to address scaling requirements, the ACX operations.
Series also addresses end-user quality requirements through high-
Table 1: Built-In Interface Options for ACX500, ACX1000, ACX2000, and ACX4000 Models

Model TDM OC3 (STM1)/ 10GbE 25GbE (QSFP28 40GbE 100GbE 100/200 Gbps
GbE (copper) GbE (combo) GbE (SFP)
(T1/E1) OC12 (STM4) (SFP+) breakout) (QSFP) (QSFP28) (CFP2- DCO)
ACX500 4 (PoE+ support on
- - - 2 - - - - -
3 ports)
ACX500-O - - 3 - 3 - - - - -
ACX500-OPOE 3 with PoE+
- - - 3 - - - - -
support
ACX1000 - - 8 4 - - - - - -
ACX1100 - - 8 4 - - - - - -
ACX2100 - - 4 4 2 2* - - - -
ACX2200 - - 4 4 2 2* - - - -
ACX4000 8 (PoE++ support
Up to 32** Up to 8/2** - Up to 14** 2* - - - -
on 2 ports)
* SFP+ ports can be configured to be 1GbE ports and accept 1GbE small form-factor pluggable transceiver (SFP).
** When equipped with appropriate I/O MIC modules. See table with ' Ordering Information.'

2
ACX500, ACX1000, ACX2000, and ACX4000 Universal Metro Routers Datasheet

• Seamless MPLS: ACX Series routers support both Ethernet Running on the Junos Space platform, Junos Space
bridging and MPLS. Growing demands for bandwidth are Connectivity Services Director ensures effortless end-to-end
accompanied by network growth in terms of number of nodes. service provisioning of metro Ethernet (E-Line, E-LAN, E-Tree,
In some cases, we can see demands to scale a network up to E-Access), VPLS, L3VPN, EVPN, and MPLS, using a simple
tens of thousands of nodes. Seamless MPLS architecture interface to design, validate, and manage these services.
enables scale and service flexibility by decoupling physical Another application of Junos Space, Cross Provisioning
topology for transport and service layers. With a seamless Platform helps service providers provision E-Line, L2/L3 VPN
MPLS architecture, service providers can leverage the existing services, and virtual private LAN service (VPLS) between
investment of MPLS in the core and edge and extend the Juniper devices and those from third-party vendors. The
operational benefit into the access layer. This enables higher Juniper Networks proNX Optical Director software platform
network service flexibility and higher scaling parameters of the manages and controls Juniper Programmable Photonic Layer
metro area network (MAN), where metro Ethernet services can open-line system elements and Juniper coherent dense
span across multiple network segments and be seamlessly wavelength-division multiplexing (DWDM) transponder-based
terminated at any point of the network or cloud. solutions, as well as integrates DWDM transponders on MX
• Junos OS: Junos OS is a reliable, high-performance, modular Series routers, PTX Series Packet Transport Routers, QFX
network operating system that is supported across all of Series switches, and TCX1000 Programmable Reconfigurable
Juniper’s physical and virtual routing, switching, and security Optical Add/Drop Multiplexers (ROADMs).
platforms. Junos OS improves network operations and
increases service availability, performance, and security with
features like low-latency multicast, comprehensive quality of Features and Benefits
service (QoS), unified in-service software upgrade (unified The ACX Series delivers new levels of programmability, reliability,
ISSU), and Junos Continuity, which eliminates the risk and and scalability to service provider and enterprise networks. The
complexity of OS upgrades. Junos OS comes with embedded ACX Series portfolio improves customer satisfaction while lowering
scripting tools and APIs, which enable automation of many the total cost of operating, maintaining, and updating the network
routines and practical integration with any operator’s back-end infrastructure.
management tools. With secure programming interfaces, the Zero Touch Deployment (ZTD)
Juniper Extension Toolkit (JET), versatile scripting support, and Based on Junos OS automation capabilities, the ACX Series routers
integration with popular orchestration frameworks, Junos OS support a zero touch deployment (ZTD) model. The ZTD model
offers flexible options for DevOps-style management that can significantly reduces the time for any new equipment installation
unlock more value from the network. and provisioning, resulting in lower OpEx and TCO and improved
• Management: Junos Space® Network Management Platform operational efficiency. In addition, this model reduces the traditional
provides comprehensive management with broad fault, complexity of deploying MPLS in the access layer.
configuration, accounting, performance, and security
management (FCAPS) capabilities, for both device and service-
level management. For device management, it supports Integrated High-Precision Timing
Network Configuration Protocol (NETCONF), CLI, SNMP The ACX Series incorporates highly scalable and reliable hardware-
v1/v2/v3 protocols, while its northbound APIs support easy based timing technology, based on Juniper’s intellectual property
integration with existing network management systems (NMS) that meets the strictest LTE-A requirements for frequency and
and operations/business support systems (OSS/BSS). phase synchronization. Providing an accurate timing reference is
one of the most significant technical and operational challenges for
deployment of LTE radio access networks. ACX Series routers
support Synchronous Ethernet for frequency as well as Precision
Time Protocol (PTP) for both frequency and phase synchronization.
Furthermore, the ACX Series allows Synchronous Ethernet and PTP
to be used in a hybrid mode for the highest level of frequency (10
ppb) and phase (< 500 nS) accuracy required for LTE-A. The
ACX500, ACX500-O, and ACX500-O-PoE also provide an
integrated GPS receiver and can act as a grandmaster (GM) clock
for a distributed PTP implementation, making them an ideal choice

3
ACX500, ACX1000, ACX2000, and ACX4000 Universal Metro Routers Datasheet

for the aggregation of small cell traffic when the backhaul is hardened, ruggedized chassis and are IP65-compliant for outdoor
transported over the Internet. deployments with no need for an enclosure or cabinet. These
routers are designed to be pole or strand mounted alongside
outdoor small cells.
Advanced Security Services
One of the significant challenges in the rollout of small cells is the
risk of security threats from easily accessible locations. The High Availability and Reliability
ACX500 enables advanced security services such as IPsec, Media Junos Continuity and unified ISSU features remove the downtime
Access Control Security (MACsec), Network Address Translation risks associated with implementing new hardware or upgrading
(NAT), and TPM to protect against potential vulnerabilities to the operating systems. Junos Continuity eliminates OS upgrades and
network as well as subscriber traffic. Hardware acceleration system reboots when adding new hardware to ACX Series routers—
through a purpose-built services engine enhances the scalability of a plug-in package provides the drivers and support files needed to
these computationally intensive services to support a large-scale bring the hardware online. Unified ISSU reduces the risks associated
small cell deployment. with OS upgrades by enabling upgrades between two different
Junos OS releases (major or minor) with no control plane disruption
and minimal traffic disruption on the forwarding plane.
Enhanced Service Assurance, SLA Management, and Ethernet
OAM
The ACX Series routers provide a comprehensive set of features. MEF CE 2.0 Compliant
Using 802.3ah, 802.1ag, Y.1731, Two-Way Active Measurement The ACX Series routers are MEF CE 2.0-compliant (excluding the
Protocol (TWAMP), and RFC2544, mobile operators and wholesale ACX6000 line) and are able to support all carrier Ethernet services,
service providers can make sure that the services being offered which include E-Line, E-LAN, E-Tree, and E-Access.
through ACX Series routers are meeting the desired SLAs.

Full Feature Set of L2, L3, IP/MPLS

Environmentally Hardened Design
The ACX Series routers support a full feature set of L2, L3, and IP/
Most of the ACX Series models such as ACX500, ACX1x00, and MPLS. Service providers cannot only monetize Layer 2 Ethernet
ACX2x00, are temperature hardened and support passive cooling services, but also Layer 3, IP/IP-VPN services, etc., for greater
for outdoor deployments in extreme weather conditions. The monetization.
ACX500-O and ACX500-O-PoE are based on environmentally
Table 2: ACX500, ACX1000, ACX2000, and ACX4000 Platform Feature Matrix

ACX500,
ACX1000, ACX2100,
Features ACX500-O, ACX4000
ACX1100 ACX2200
ACX500-O-POE
Throughput Up to 60 Gbps Up to 60 Gbps Up to 60 Gbps Up to 60 Gbps
Layer 2 IEEE 802.3 bridging ✓ ✓ ✓ ✓
IEEE 802.1q ✓ ✓ ✓ ✓
IEEE 802.1ad (Q-in-Q) ✓ ✓ ✓ ✓
VLAN id manipulation for outer/inner: swap/pop/push ✓ ✓ ✓ ✓

Rapid Spanning Tree Protocol (RSTP)/VLAN

✓ ✓ ✓ ✓
Spanning Tree Protocol (VSTP)/Multiple Spanning Tree Protocol (MSTP)

Link Aggregation Control Protocol (LACP) ✓ ✓ ✓ ✓

Enhanced load balancing based on L2-L4 header info ✓ ✓ ✓ ✓
Link Layer Discovery Protocol (LLDP) ✓ ✓ ✓ ✓
Layer 2 bridge protocol data unit (BPDU) tunneling/MAC rewrite ✓ ✓ ✓ ✓

4
ACX500, ACX1000, ACX2000, and ACX4000 Universal Metro Routers Datasheet

ACX500,
ACX1000, ACX2100,
Features ACX500-O, ACX4000
ACX1100 ACX2200
ACX500-O-POE
Layer 3 IPv4 ✓ ✓ ✓ ✓
IPv6 ✓ ✓ ✓ ✓
RPF ✓ ✓ ✓ ✓
Equal-cost multipath (ECMP) ✓ ✓ ✓ ✓
Enhanced load balancing based on L2-L4 header info ✓ ✓ ✓ ✓
OSPF ✓ ✓ ✓ ✓
IS-IS ✓ ✓ ✓ ✓
BGP ✓ ✓ ✓ ✓
Indirect/composite next hop ✓ ✓ ✓ ✓
MPLS and Seamless MPLS RSVP ✓ ✓ ✓ ✓
LDP ✓ ✓ ✓ ✓
Path Computation Element Protocol (PCEP) ✓ ✓ ✓ ✓
RSVP-TE ✓ ✓ ✓ ✓
BGP-LU ✓ ✓ ✓ ✓
LDP-RSVP ✓ ✓ ✓ ✓
RSVP fast reroute (FRR) ✓ ✓ ✓ ✓
Services IEEE 802.3 bridge domain ✓ ✓ ✓ ✓
PWE (T-LDP) ✓ ✓ ✓ ✓
L2VPN (BGP) ✓ ✓ ✓ ✓
Layer 3 VPN ✓ ✓ ✓ ✓
Circuit emulation SAToP/CESoPSN/ATM o MPLS ✓1 ✓1 ✓
Integrated routing and bridging (IRB) ✓ ✓ ✓ ✓
Stateless filters L2-L4 ✓ ✓ ✓ ✓
Class of Service (CoS) 8 queues per port with schedulers and shaping ✓ ✓ ✓ ✓
Classification based on 802.1p,
✓ ✓ ✓ ✓
DiffServ code point(DSCP), IP-precedence, Exp bit
Single-rate policer ingress/egress ✓ ✓ ✓ ✓
Two-rate three-color policer ingress/egress ✓ ✓ ✓ ✓
Per-Port Egress Shaping ✓ ✓ ✓ ✓
OAM and SLA Management Bidirectional Forwarding Detection (BFD) ✓ ✓ ✓ ✓
Connectivity fault management (CFM) ✓ ✓ ✓ ✓
Y.1731 ✓ ✓ ✓ ✓
RFC2544 ✓ ✓ ✓ ✓
TWAMP ✓ ✓ ✓ ✓
Multicast Protocol Independent Multicast (PIM) ✓ ✓ ✓ ✓
Internet Group Management Protocol (IGMP) ✓ ✓ ✓ ✓
IGMP snooping ✓ ✓ ✓ ✓
Timing and Sync BITS/1pps/10MHz ✓ ✓ ✓ ✓
1588v2 BC ✓ ✓ ✓ ✓
1588v2 over IP ✓ ✓ ✓ ✓
1588v2 over Ethernet ✓ ✓ ✓ ✓
Synchronous Ethernet ✓ ✓ ✓ ✓
Hybrid mode ✓ ✓ ✓ ✓
Embedded GM ✓
Security L2 storm control ✓ ✓ ✓ ✓
IPsec ✓2
NAT ✓2 ✓2

5
 ACX500, ACX1000, ACX2000, and ACX4000 Universal Metro Routers Datasheet

ACX500,
ACX1000, ACX2100,
Features ACX500-O, ACX4000
ACX1100 ACX2200
ACX500-O-POE
Configuration, Management CLI ✓ ✓ ✓ ✓
and Automation
NETCONF ✓ ✓ ✓ ✓
NMP v2/v3 ✓ ✓ ✓ ✓
SLAX/Python on-box scripting tools ✓ ✓ ✓ ✓
ZTD ✓ ✓ ✓ ✓
YANG ✓ ✓ ✓ ✓
1
See Table 2 for E1/T1/STM/OC ports support per each platform.
2
Ingress only

Specifications
This section lists basic specifications for the ACX500, ACX1000, ACX2000, and ACX4000 routers. For further details, please refer to the
hardware installation manuals at https://www.juniper.net/documentation/.
Specifications ACX500, ACX500-O, ACX1000, ACX2100,
ACX4000
ACX500-O-POE ACX1100 ACX2200
Dimensions ACX500: 17.5 x 1.75 x 9.4 in (44.5 x 4.4 x 17.5 x 1.75 x 9.4 in (44.5 x 4.4 x 17.5 x 4.35 x 9.25 in (44.5 x 11 x
(W x H x D) 17.5 x 1.75 x 9.4 in (44.5 x 4.4 x 24 cm) 24 cm) 24 cm) 23.5 cm)
ACX500-O:
10 x 12.3 x 4.3 in (25.4 x 31.2 x 10.9 cm)
ACX500-O-POE:
9.58 x 15.68 x 4.68 in (24.3 x 39.8 x 11.9 cm)
Weight (lb/kg) fully ACX500-DC: 8.6 lb (3.9 kg) ACX1000: 6.5 lb (2.94 kg) 8.3 lb (3.77 kg) 23.8 lb (10.82 kg) (Fully configured
configured ACX500-AC: 9.26 lb (4.2 kg) ACX1100: 7.8 lb (3.54 kg) with two power supply units, two
ACX500-O-DC: 11 lb (5 kg) MICs)
ACX500-O-AC: 11.68 lb (5.3 kg)
ACX500-O-POE-DC: 13.66 lb (6.2 kg) ACX500-O-
POE-AC: 14.33 lb (6.5 kg)
Power (DC) -48 V nominal or -60 V telco nominal or +24 VDC -48 V nominal or -60 V telco -48 V nominal or -60 V telco -48 V nominal or -60 V telco
nominal nominal or +24 VDC nomina nominal or +24 VDC nominal nominal or +24 VDC nominal
Power (AC) 90-240 V 90 to 240 VAC for ACX1100- AC 90 to 240 VAC for ACX2100- AC 90 to 240 VAC
only only
Maximum power 65 W + PoE power (80 W) (ACX500); 50 W (ACX1000); 70 W (ACX2000); 150 W (w/o MICs);
draw 55 W (ACX500-O); 35 W (ACX1100-AC); 60 W (ACX2100-AC); 45 W for each MIC;
55 W + PoE power (80 W) (ACX500-O-POE) 40 W (ACX1100-DC) 80 W (ACX2100-DC) 65 W for each PoE++ port
Operating -40° to 149° F -40° to 149° F -40° to 149° F -40° to 149° F
temperature (-40° to 65° C) (-40° to 65° C) (-40° to 65° C) (-40° to 65° C)
full featured
Humidity 95% RH noncondensing 95% RH noncondensing 95% RH noncondensing 95% RH noncondensing

6
ACX500, ACX1000, ACX2000, and ACX4000 Universal Metro Routers Datasheet

Approvals
ACX500 ACX500-O ACX500-OPOE ACX1000 ACX1100 ACX2100 ACX2200 ACX4000
Safety Approvals
CAN/CSA-C22.2 No. 60950-1 Yes Yes Yes Yes Yes Yes Yes Yes
UL 60950-1 Yes Yes Yes Yes Yes Yes Yes Yes
EN 60950-1 Yes Yes Yes Yes Yes Yes Yes Yes
IEC 60950-1—CB Scheme Yes Yes Yes Yes Yes Yes Yes Yes
EN 60825-1 Yes Yes Yes Yes Yes Yes Yes Yes
UL 60950-22 , IEC 60950- 22, CSA 60950-22: Safety equipment to be installed
- Yes Yes - - - - -
outdoors

EMC
AS/NZS CISPR22 Class A Yes - - Yes Yes Yes Yes Yes
EN55022 Class A Yes - - Yes Yes Yes Yes Yes
VCCI Class A Yes - - Yes Yes Yes Yes Yes
FCC Part 15 Class A Yes - - Yes Yes Yes Yes Yes
IECS-003 Issue 4 Yes - - Yes Yes Yes Yes Yes
BSMI CNS 13438 and NCC C6357 Taiwan Radiated Emissions Yes - - Yes Yes Yes Yes Yes
KN 22, Class A Yes - - Yes Yes Yes Yes Yes
CISPR 32/EN55032: 2012 European Radiated Emissions Class A Yes - - Yes Yes Yes Yes Yes
AS/NZS CISPR22 Class B - Yes Yes - - - - -
EN55022 Class B - Yes Yes - - - - -
VCCI Class B - Yes Yes - - - - -
FCC Part 15 Class B - Yes Yes - - - - -
IECS-003 Issue 4 Class B - Yes Yes - - - - -
BSMI CNS 13438 and NCC C6357 Taiwan Radiated Emissions - Yes Yes - - - - -
KN 22, Class B - Yes Yes - - - - -
CISPR 32/EN55032: 2012 European Radiated Emissions Class B - Yes Yes - - - - -
EN-61000-4-6 Low Frequency Common Immunity Yes Yes Yes Yes Yes Yes Yes Yes
EN-61000-4-11 Voltage Dips and Sags Yes Yes Yes Yes Yes Yes Yes Yes
CISPR 24/EN55024 Information Technology Equipment Immunity Characteristics Yes Yes Yes Yes Yes Yes Yes Yes

ETSI (European Telecommunications Standardization Institute)

EN 300 386 V1.6.1 Telecommunication Network Equipment, Electromagnetic
Yes Yes Yes Yes Yes Yes Yes Yes
Compatibility Requirements
ETSI EN 300 019-2-1 (2000)— Storage, Class T1.2 Yes Yes Yes Yes Yes Yes Yes Yes
ETSI EN 300 019-2-2 (1999)— Transportation, Class T2.3 Yes Yes Yes Yes Yes Yes Yes Yes
ETSI EN 300 019-2-3 (2003)— Stationary Use at Weather Protected Locations, Class
- - - - Yes Yes Yes -
T3.4
ETSI EN 300 019-2-3 (2003)— Stationary Use at Weather Protected Locations, Class
Yes - - - - - - -
T3.2
ETSI EN 300 019-2-4 (2003)— Stationary Use at Non-Weather Protected Locations,
- Yes Yes - - - - Yes
Class 4.1
ETSI EN 300 019-2-4 (2003)— Stationary Use at Non-Weather Protected Locations,
- - - Yes - - - -
Class 4.1E
ETSI 300753 (1997)— Acoustic Noise Emitted by Telecommunications Equipment Yes Yes Yes Yes Yes Yes Yes Yes

Other EMC Requirements

IEEE 1613 Class 2 Environmental and Testing Requirements for Communications
Yes Yes Yes - - - - -
Networking
Devices in Electric Power Substations Yes Yes Yes - - - - -
IEC 61850-3 Communication networks and systems for power utility automation Yes Yes Yes - - - - -
EN50121-4 Railway applications Yes Yes Yes - - - - -
ETSI EN 300 440-1/-2 GPS spurious emission Yes Yes Yes - - - - -
Deutsche Telekom 1TR9 (2008) EMC Specification Yes Yes Yes Yes - - - -
British Telecom EMC Immunity Requirements (2007) Yes Yes Yes Yes - - - -
ITU-T K.21 (2011) Resistibility of telecommunication equipment installed in customer
Yes Yes Yes - - - - -
premises to overvoltages and overcurrents

7
ACX500, ACX1000, ACX2000, and ACX4000 Universal Metro Routers Datasheet

ACX500 ACX500-O ACX500-OPOE ACX1000 ACX1100 ACX2100 ACX2200 ACX4000

ITU-T K.20 (2011) Resistibility of telecommunication equipment installed in telecom
Yes Yes Yes - - - - -
centers to overvoltages and overcurrents

NEBS
SR-3580 NEBS Criteria Levels (Level 3 Compliance) Yes - - Yes Yes Yes Yes Yes
GR-63-CORE: NEBS, Physical Protection Yes - - Yes Yes Yes Yes Yes
GR-1089-CORE: EMC and Electrical Safety for Network Telecommunications
Yes Yes Yes Yes Yes Yes Yes Yes
Equipment (Issue 6 compliant)
GR-3108-CORE: Generic Requirements for Network Equipment in the Outside Plant
Yes Yes Yes Yes Yes Yes Yes Yes
(OSP)
GR-487-CORE: Issue 4 Electronic equipment cabinets - Yes Yes - - - - -

Ingress Protection
IEC 60529 - Degree of protection provided by Enclosure (IP 65) - Yes Yes - - - - -

Telecomm Compliance
RTTE Directive 1995/5/EC - - - Yes - Yes - Yes
T1 and XDSL Interfaces FCC Part 68 Yes Yes Yes
- - - - -
(T1 Only) (T1 Only) (T1 Only)
Industry Canada CS-03 - - - Yes - Yes - Yes
JATE Green Book - - - Yes - Yes - Yes
TBR 21 (XDSL only) - - - No - No - No
E1 Interface TBR 12/13 - - - Yes - Yes - Yes
ACA TS016 - - - Yes - Yes - Yes
G.703 - - - Yes - Yes - Yes
Device management: NETCONF, CLI, SNMP v1/v2/v3 Yes Yes Yes Yes Yes Yes Yes Yes
End-to-end provisioning of E-Line, emulated LAN (ELAN), Layer 3 VPN (L3VPN),
Yes Yes Yes Yes Yes Yes Yes Yes
OAM, class of service (CoS)
Device and service-level fault management Yes Yes Yes Yes Yes Yes Yes Yes
Device and service-level performance management Yes Yes Yes Yes Yes Yes Yes Yes

Metro Ethernet Forum (MEF)

MEF CE2.0 compliant Yes Yes Yes Yes Yes Yes Yes Yes

Juniper Networks Services and Support

Juniper Networks is the leader in performance-enabling services that are designed to accelerate, extend, and optimize your high-
performance network. Our services allow you to maximize operational efficiency while reducing costs and minimizing risk, achieving a
faster time to value for your network. Juniper Networks ensures operational excellence by optimizing the network to maintain required
levels of performance, reliability, and availability. For more details, please visit https://www.juniper.net/us/en/products.html.

8
 ACX500, ACX1000, ACX2000, and ACX4000 Universal Metro Routers Datasheet

Ordering Information Product Number Name

ACX-MIC-4COC3- 4xCHOC3/STM-1/1xCHOC12/STM-4 MIC for ACX4000
Product Number Name
1COC12-CE
ACX500-AC ACX500 indoor unit 2x1GbE (SFP) + 4x1GbE (combo) with single AC
power supply, 1 U, temperature hardened, passive cooling, rack ACX-MIC-16CHE1- 16x T1/E1 MIC for ACX4000
mounting options, PoE support, Junos OS T1-CE

ACX500-DC ACX500 indoor unit 2x1GbE (SFP) + 4x1GbE (combo) with single DC
power supply, 1 U, temperature hardened, passive cooling, rack
mounting options, PoE support, Junos OS
ACX500-O-AC ACX500 outdoor unit 3x1GbE (SFP) + 3x1GbE (Cu) with single AC
About Juniper Networks
power supply, IP65-compliant for outdoor installation, pole/wall
mounting options, no Power over Ethernet (PoE) support, Junos OS
At Juniper Networks, we are dedicated to dramatically simplifying
ACX500-O-DC ACX500 outdoor unit 3x1GbE (SFP) + 3x1GbE (Cu) with single DC network operations and driving superior experiences for end users.
power supply, IP65-compliant for outdoor installation, pole/wall Our solutions deliver industry-leading insight, automation, security
mounting options, no PoE support, Junos OS
ACX500-O-POE-AC ACX500 outdoor unit 3x1GbE (SFP) + 3x1GbE (Cu) with single AC
and AI to drive real business results. We believe that powering
power supply, IP65-compliant for outdoor installation, pole/wall connections will bring us closer together while empowering us all to
mounting options, PoE support, Junos OS
solve the world’s greatest challenges of well-being, sustainability
ACX500-O-POE-DC ACX500 outdoor unit 3x1GbE (SFP) + 3x1GbE (Cu) with single DC
power supply, IP65-compliant for outdoor installation, pole/wall and equality.
mounting options, PoE support, Junos OS
ACX500-LIC-GPS ACX500 license to activate GPS receiver
ACX500-LIC-SEC ACX500 license to activate IPsec and NAT features
ACX1000-DC ACX1000 unit, 8xT1/E1, 8xGbE copper, 4xGbE combination (copper
or SFP), 1 U, ETSI 300, dual feed DC power, temperature hardened,
passively cooled, Junos OS (optics sold separately)
ACX1100-AC ACX1100 unit, 8xGbE copper and 4xGbE combination (copper or
SFP), 1 U, ETSI 300, redundant AC power, temperature hardened,
passively cooled, Junos OS (optics sold separately)
ACX2100-DC ACX2100 unit, 16xT1/E1, 2x10GbE SFP+, 4xGbE copper, 4xGbE
combination (copper or fiber), 2xGbE SFP, 1 U, ETSI 300, redundant
DC power, temperature hardened, passively cooled, Junos OS (optics
sold separately)
ACX2100-AC ACX2100 unit, 16xT1/E1, 2x10GbE SFP+, 4xGbE copper, 4xGbE
combination (copper or fiber), 2xGbE SFP, 1 U, ETSI 300, redundant
AC power, temperature hardened, passively cooled, Junos OS (optics
sold separately)
ACX2200-DC ACX2200 unit, 2x10GbE SFP+, 4xGbE copper, 4xGbE combination
(copper or fiber), 2xGbE SFP, 1 U, ETSI 300, redundant DC power,
temperature hardened, passively cooled, Junos OS (optics sold
separately)
ACX2200-AC ACX2200 unit, 2x10GbE SFP+, 4xGbE copper, 4xGbE combination
(copper or fiber), 2xGbE SFP, 1 U, ETSI 300, redundant AC power,
temperature hardened, passively cooled, Junos OS (optics sold
separately)
ACX4000-DC ACX4000 modular unit, 2x10GbE SFP+, 8xGbE combo (copper/fiber)
with PoE++ on two ports, 2xGbE SFP, 2.5 U, ETSI 300, redundant DC
power, temperature hardened, Junos OS, two configurable MIC slots
(optics sold separately)
ACX4000-AC ACX4000 modular unit, 2x10GbE SFP+, 8xGbE combo (copper/fiber)
with PoE++ on two ports, 2xGbE SFP, 2.5 U, ETSI 300, redundant AC
power, temperature hardened, Junos OS, two configurable MIC slots
(optics sold separately)

Corporate and Sales Headquarters APAC and EMEA Headquarters

Juniper Networks, Inc. Juniper Networks International B.V.
1133 Innovation Way Boeing Avenue 240 1119 PZ Schiphol-Rijk
Sunnyvale, CA 94089 USA Amsterdam, The Netherlands
Phone: 888.JUNIPER (888.586.4737) Phone: +31.207.125.700
or +1.408.745.2000
www.juniper.net

Copyright 2023 Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the United
States and other countries. All other trademarks, service marks, registered marks, or registered service marks are the property of their respective owners. Juniper Networks assumes no
responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.

1000397-018-EN Aug 2023 9