0% found this document useful (0 votes)
43 views3 pages

Kessel 93010.02 MS

Uploaded by

Rana Fezah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
43 views3 pages

Kessel 93010.02 MS

Uploaded by

Rana Fezah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Grease separator EasyClean free NS 10, Mix & Pump, SonicControl

Article information
Item no.: 93010.02/MS
GTIN: 4026092065051
Price group: 60

Advantages
Direction of flow can be changed thanks to self-
sealing interchangeable hubs (NS 2- NS 10)
Clean and odour-free disposal and cleaning
Simple control

Description
The separator for greasy wastewater is suitable for free-standing set-up in frost-
protected rooms and comes without metallic components in the tank. The
collecting tank made of permanently resistant polymer (PE) is equipped with an
integrated sludge trap and has a tapered base for fast and clean disposal. Two
odour-tight covers with quick-release closures make easy access possible for
cleaning and maintenance work. The innovative Shredder-Mix-System with
integrated macerating system is responsible for homogenising and circulating the
tank contents. Cleaning and odour-neutral disposal takes place via an exterior
pump with 2-way valve and change lever which can be disconnected from the tank
by a shut-off valve. After disposal, a maximum of 3 litres residual sludge volume is
left in the tank. Manual control is carried out by a user-friendly control unit that can
be integrated into the building management system through a potential-free
contact. 20 year polyethylene warranty.

Variant
Shut-off valve: yes
Disposal variant: Mix & Pump
Protection class motor: yes
Sludge bucket: yes
Nominal size (NS): 10
SonicControl: yes
Disposal system: Disposal pump
Refill inlet in accordance with DIN 1988: yes
Type of disposal: manual disposal and cleaning system
Shaft seal: 1 screw-type valve 1"
Load-bearing capacity (DIN 19901): F3

General characteristics
Material: PE
Standard: EN 1825

Page 1 Subject to technical changes. 03.04.2024


Installation situation: free-standing installation
Delivery state: Installation-ready (electrical components,
connection parts must be connected on site)
Scope of delivery: Storz-B coupling R 2 1/2" for disposal vehicle
connection

Dimensions
Net weight: 270 kg
Gross weight: 305 kg
Set-up area, width: 1108 mm
Set-up area, height: 1932 mm
Set-up area, length: 2822 mm
Required access area, width: 940 mm
Required access area, height: 1678 mm
Required access area, length: 2590 mm
Packaging dimension: width
Packaging dimension: height
Packaging dimension: length

Tank/drain body
Nominal pressure (PN): 10
Pressure pipe connection (DN): 65
Pressure pipe connection (OD): 75 mm
Distance pipe bottom outlet to tank bottom: 1185 mm
Distance pipe bottom inlet to tank bottom: 1255 mm
Outlet nominal size (OD): 160 mm
Outlet nominal size (DN): 150
Inlet nominal size (DN): 160 mm
Inlet nominal size (DN): 150
Connection inlet/outlet sockets: PE-HD pipes in accordance with DIN 19537, HT pipes
in accordance with DIN 19560, PP or AS
Servicing opening: 420 mm

Coverage features
Type of cover: Cover
Cover material: Polymer
Colour of cover: violet
Cover locking: Quick-release closure
Tightness: odour-tight

Wastewater contents
Separator contents: 900 l
Total volume: 1900 l
Hose: 1000 l
Storage quantity of light liquid: 400 l

Pumping device
Pump control: SPF 300 KE 2.0
Number of pumps: 1
Weight: 44 kg

Page 2 Subject to technical changes. 03.04.2024


Connection type: Direct connection
Rated current: 6,2 A
Length of mains cable for pump: 5m
Self-diagnosis system (SDS): I
Insulation class: F
Cos phi - power factor: 0,87
Protection class control unit: IP 55
DSC: integrated
Max. temperature (permanent) of conveyed 40 °C
material:
Max. pumping capacity: 60 m³/h
Max. pumping height: 17 m
Speed: 2850 U/min
Power P1: 3,6 kW
Power P2: 3 kW
Operating mode: S2 - 30 min.
Type of fuse required (electrical protection): Fuse protection through control unit 400 V
Type of pump connection cable: H07RN-F 7G 1.5 mm²
Impeller type: Radial impeller with macerating system

Control
Motor protection switch: yes
Type of fuse required (RCD): 30 mA
Protection class probe: IP 54
Mains frequency: 50 Hz
Operating voltage: 400 V
Connection type: Direct connection
Potential-free contact: yes
GSM interface: no
USB interface: no
Log book function: no
Multi-line display: no
Battery buffering: no
Self-diagnosis system (SDS): yes
Max. permissible switching frequency: yes

Page 3 Subject to technical changes. 03.04.2024

You might also like