SCU
Supervisory Control Unit
ES1274A
Intelligent vehicle auxiliary power controller for SAE L3-L4
levels electric vehicle systems
Multiple Interfaces
TECHNICAL CHARACTERISTICS
CAN Up to 3 CAN bus
CAN, LIN, DI, AI, PWM, HSO, LSO, 5V
outputs, etc. LIN UP to 1 LIN bus
Model-Based
PWM Input Up to 4 PWM inputs
Environment
Digital Input Up to 10 channels
MATLAB/Simulink Model-based Analog Input Up to 8 channels
development capable Frequency Up to 2 frequency signal input
Powerful MCU
NXP ASIL-D rated SPC5744P chip
High-side Output Up to 4 channels with 2 PWM outputs
configurable
Low-side Output Up to 10 channels with 2 PWM outputs
Compatibilities
configurable
5V Output Up to 2 ports
All-in-one vehicle control HW platform
KEYON Up to 1 Wake-up signal
INTERFACE DIMENSION
Signal Name Number Function Interface Description
5V Output 2 5V Sensor Voltage External Sensor 5V Power Supply
2 * Analog Signal 0~32V
AI 7 Analog Input
5 * Analog Signal 0~5V
High Voltage Interlock
AI 1 1 * Analog Signal 0~32V
Signal Output
WAKEUP 1 Power-On Signal 1* KEYON
DI 10 Digital Input 5 * Active High 5 * Active Low
Frequency Range 20Hz-2kHz
DI/SPEED 2 Frequency Input
1 * Active High 1 * Active Low
1 * Rated 3A, Maximum 5A
High-Side Driver
HSO 3 2 * Rated 0.8A with PWM Output 1Hz-2kHz
Output
configurable
High Voltage Interlock
HSO 1 Voltage Logic High
Signal Output
2 * Rated 3A Maximum 5A
Low-Side Driver
LSO 10 6 * Rated 0.25A with 2 * PWM Output
Output
configurable
ALL Supports CAN Flashing
CAN 3 CAN
1 * Supports Specific Frame Wake-Up
LIN_BUS 1 LIN BUS Support Wakeup
