E17 Excavators
Specifications
Weights Working Range
Operating weight with canopy and bucket (ISO 6016) 1711 kg
Transport mass (no attachment) 1594 kg
Additional weight for cab with heating 96 kg
Additional weight for long dozer blade 9 kg
Ground pressure with rubber tracks 29.40 kPa
Engine
Make / model Yanmar / 3TNV74-PBC (Stage V)
Fuel Diesel
Number of cylinders 3
Displacement 993 cm3
Maximum power @ 2400 rpm (ISO 14396) 11.0 kW
Maximum torque @ 1800 rpm (SAE J1995) 50.2 Nm
Hydraulic System
Pump type Triple gear pump
Pump capacity 32.50 L/min
Auxiliary flow 32.50 L/min
Auxiliary relief 227.0 bar
(A) 196.0° (G) 2405.0 mm
Performance (B) 3919.0 mm (H) 3371.0 mm
Digging force, dipperstick (ISO 6015) 9108 N (C) 3871.0 mm (I) 2370.0 mm
Digging force, bucket (ISO 6015) 16177 N (D) 1526.0 mm (J) 1810.0 mm
Drawbar pull 14334 N (E) 220.0 mm (K) 2249.0 mm
Travel speed, low range 2.1 km/h (F) 204.0 mm
Travel speed, high range 4.3 km/h
Dimensions
Slew System
Boom swing, left 80.0°
Boom swing, right 60.0°
Slew rate 8.7 RPM
Fluid Capacities
Fuel reservoir 19.00 L
Hydraulic reservoir 13.90 L
Environmental
Noise level LpA(EU Directive 2006/42/EC) 79 dB(A)
Noise level LWA(EU Directive 2000/14/EC) 93 dB(A)
Whole body vibration (ISO 2631–1) 0.33 ms-2
Hand-arm vibration (ISO 5349–1) 0.51 ms-2
Standard Features (A) 235.0 mm (J*) 1360.0 mm
230 mm rubber track Hydraulic and travel control lockout (B) 419.0 mm (K) 2299.0 mm
980 mm dozer blade with two 190 mm blade extensions Hydraulic joystick controls (C) 1340.0 mm (L) 230.0 mm
Battery disconnect switch Hydraulically retractable undercarriage from 1360 mm to (D) 1114.0 mm (M) 433.0 mm
Control console locks 980 mm (E) 1045.0 mm (N) 589.0 mm
Cupholders Retractable seat belt (F) 2666.0 mm (O) 1128.0 mm
Double acting auxiliary hydraulics Storage compartment (G) 1476.0 mm (P) 1009.0 mm
Engine monitor with auto shutdown TOPS/ROPS/FOPS canopy 1 (H) 3665.0 mm (Q) 1801.0 mm
Exposed counterweight with 4 mm steel tailgate Upper structure four point tie down (I) 25.0 mm (R) 1645.0 mm
Foldable and ergonomic travel pedals Water separator (J) 980.0 mm
Full fuel warning alarm Work light (boom) Options
Horn Warranty: 24 months, 2000 hours (whichever occurs first)
1. Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Demolition package (boom, Additional halogen lights
Object Protective Structure (FOPS) - Meets requirements of ISO 3449. arm, bucket cylinder covers Beacon
& HD travel hoses guard) Dlx textile suspension seat
Object handling package Special application kit
(Valves, OWD, Lifteye) L/R mirrors
TOPS/ROPS cab w/ heater Fire extinguisher
Long dozer blade Klac C and MS01 couplers
AUX1 direct return to tank Grease Gun w/ holder
AUX1 on arm
Keyless ignition
Travel motion alarm
AM/FM MP3 radio
B61C 11001 — B61C 99999 • 2024- 5- 15 • ©2024 Bobcat EMEA - www.bobcat.com/eu
Specifications are subject to change without notice - Pictures of Bobcat units may show other than standard equipment
