JCB LOADALL | 531-70
MAX. PAYLOAD: 3.1 tonnes (6832lb)
MAX. LIFT HEIGHT: 7 metres (23ft)
D E
F
B
G
STATIC DIMENSIONS
Machine model 531-70 Machine model 531-70
m (ft-in) m (ft-in)
A Overall height 2.49 (8-2) G Overall length to front carriage 4.99 (16-4)
B Overall width (over tyres)* 2.23 (7-4) H Ground clearance 0.40 (1-4)
C Inside width of cab 0.94 (3-1) Outside turn radius (over tyres) 3.7 (12-2)
D Front track 1.81 (5-11) Weight – Fixed kg (lb) 6900 (15215)
E Wheelbase 2.75 (9-0) Tyres 15.5/80-24
F Overall length to front tyres 4.38 (14-4)
A Product
*Dependant upon tyre specified. of Hard Work
JCB LOADALL | 531-70
LIFT PERFORMANCE – 531-70 LIFT PERFORMANCE – 531-70
26
8 Machine Model 531-70
Maximum lift capacity kg (lb) 3100 (6834)
24 Lift capacity to full height kg (lb) 2400 (5291)
7
2.4
Lift capacity at full reach kg (lb) 1250 (2756)
22 60° 2.0 2,400kg Lift height m (ft-in) 7.0 (23-0)
2,700kg
Reach at maximum lift height m (ft-in) 0.48 (1-7)
3,100kg 1.5
20
6 Maximum forward reach m (ft-in) 3.7 (12-2)
50° 1.0
Reach with 1 tonne load m (ft-in) 3.7 (12-2)
18 3,000kg
0.5 Placing height m (ft-in) 6.3 (20-8)
16
5
40° Complies with stability test EN 1459 Annex B.
2,700kg
14
2,500kg
4
30°
12
2,000kg
10 3
20°
1,500kg
8
2
6 1,250kg
10°
0.5m
4
0°
0 0
-4°
2
1
5 4 3 2 1 0 Metres
16 14 12 10 8 6 4 2 0 Feet
A Product
of Hard Work
JCB LOADALL | 531-70
ENGINE HYDRAULICS
Latest technology and advanced design provides low fuel consumption, reduced noise, high torque and power output, Two (three stage for turbo) stage gear pump with suction strainer and filter.
total reliability and minimal maintenance. Operating system pressure bar (psi) 241 (3500)
Machine Model – 531-70 Standard Option Main Hydraulics ltrs 82
Displacement ltr (in3) 4.4 (269) 4.4 (269) Steering System (Turbo Only) ltrs 44
No. of cylinders 4 4 Cooling System ltrs 37
Bore size mm (in) 103 (4.05) 103 (4.05) Total Flow ltrs 163
Stroke mm (in) 132 (5.0) 132 (5.0) Hydraulic Cycle Times Seconds
Aspiration Naturally Aspirated Turbo Boom raise 7.2
Power rating Boom lower 5.4
Power @ 2200rpm kW (HP) 63.0 (84.5) 74.2 (100) Extend 6.8
Torque rating Retract 5.0
Torque @ 1200rpm Nm (lbf ft) 320 (236) – Bucket dump 3.5
Torque @ 1300rpm Nm (lbf ft) – 425 (313) Bucket crowd 2.9
TRANSMISSION
ELECTRICS
JCB powershift transmission incorporating torque converter, bevel box and a 4 speed powershift gearbox in one resiliently
12 v negative earth. 130 AH battery. 95 amp alternator. Full road lighting. Reversing light. Direction indicators. Hazard warning.
mounted unit.
Reverse alarm.
A combined steering column mounted switch incorporating directional control and 4 forward and 4 reverse powershift gears.
Travel speed 28kph (17mph) 32kph (20mph) when 2/4WD select is ordered.
Front and rear drive axles: JCB epicyclic hub reduction drive/steer axles with Max-Trac torque proportioning differentials. CAB
Permanent 4 wheel drive.
Quiet safe and comfortable cab conforms to ROPS ISO 3471 and FOPS ISO 3449. Tinted glass all round. Laminated roof screen.
BRAKES Roof bars, front, rear and roof screen wash/wipe and heater/screen demister. Opening rear window. Audio-visual warning system
for coolant temperature, engine oil pressure, air cleaner, battery charge, transmission oil temperature and pressure, water in fuel.
Service brakes: Hydraulically activated, self-adjusting, oil-immersed in-board multi-disc type on front axle. Hourmeter and road speed indicator. Engine temperature, fuel gauge and inclinometer.
Parking brake: Hand operated disc brake on output of gearbox. Mechanical joystick, direct acting hydraulic control levers. Adjustable steer column with stalk bar powershift change and forward
reverse shuttle. Throttle and brake pedal. Adjustable deluxe seat with adjacent park brake fitted.
Automatic eye level audio-visual load moment indicator warning system receiving a signal from a load sensor on the rear axle.
BOOM AND CARRIAGE
This system continuously monitors the machine’s forward stability and leaves the operator in control at all times.
Boom is manufactured from high tensile steel. Safety canopy as above but with side glass and roof glass only (screen wiper and heater/screen demister not applicable).
Low maintenance, hard wearing pads.
JCB Q-fit self-levelling carriage with lever operated pin locking accepts pallet forks and a wide range of attachments.
STEERING
One boom end auxiliary hydraulic service fitted as standard.
Hydrostatic power steering with power track rods on both axles.
SAFETY CHECK VALVES Three steer mode options: front wheel steer; all wheel steer; crab steer: operated from in the cab by a selection switch.
Fitted to carriage tilt, telescopic and boom lift rams.
OPTIONS AND ACCESSORIES
SERVICE CAPACITIES
Options: Front and rear working lights, rotating flashing beacon, fire extinguisher, radial industrial tyres, electrical 2/4WD select,
limited slip differential in front axle, windscreen and roof guard, air suspension seat, deluxe cab trim, roof and front screen blind,
Fuel tank litres (UK gal) 148 (32.5)
radio kit, heavy duty battery, air conditioning, reversing fan, deluxe trim, armrest (SLC only), smoking pack.
Hydraulic tank litres (UK gal) 113 (24.8)
Single lever mechanical joystick, with push button extend and retract. A Product
Coolant litres (UK gal) 23 (5.1)
Attachments: Contact your local dealer for details of the comprehensive range. of Hard Work
JCB LOADALL | 531-70
A GLOBAL COMMITMENT TO QUALITY
JCB’s total commitment to its products and customers has helped it grow from a one-man
business into Britain’s largest privately owned manufacturer of backhoe loaders, crawler excavators,
wheeled excavators, telescopic handlers, wheeled loaders, dump trucks,
rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders and tractors.
By making constant and massive investments in the latest production technology, the JCB factories
have become some of the most advanced in Europe.
By leading the field in innovative research and design, extensive testing and stringent quality control,
JCB machines have become renowned all over the world for performance, value and reliability.
And with a global sales and service network of over 400 distributors and agents, the company
exports over 70% of its production to all five continents.
Through setting the standards by which others are judged, JCB has become one of Britain’s
most impressive success stories.
JCB cares for the environment. This paper has been JCB Sales Limited, Rocester, Staffordshire ST14 5JP. Tel: 01889 590312. Fax: 01889 590588. Web: http://www.jcb.com
produced without the use of elemental chlorine A Product
chemicals in the bleaching process. JCB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. 9999/4952 7/06 Issue 4 of Hard Work
