NICKEL LATERITES
Charles R M Butt
CRC LEME, CSIRO Exploration and Mining
[email protected]Nickel laterites are regolith materials, derived from ultramafic rocks, that contain
economically exploitable reserves of nickel (and, commonly, cobalt). They are found where
the ultramafic rocks outcrop over a wide area and the regolith is well preserved. The deposits
are developed on olivine-bearing ultramafic rocks, mainly dunite and olivine-pyroxene
peridotite, and their serpentinized equivalents. The nickel is derived principally from
forsteritic olivine (>Fo75), which commonly contains 0.16-0.40% Ni.
The nickel concentrations generally occur in one or more horizons or units within the profile
and the ores can be classified according to their mineralogy (Brand et al, 1998):
Oxide: dominated by iron oxyhydroxides, principally goethite, forming the mid-
to upper saprolite and extending to the pedolith. Nickel is hosted mainly in
goethite, by substitution for iron and/or by adsorption. Manganese oxides (e.g.,
asbolan, lithiophorite) are commonly abundant and are enriched in both cobalt
and nickel. Deposits developed over dunites (adcumulates) may contain
abundant secondary silica. Mean grades are about 1.0-1.6% Ni; examples
include Cawse, Ravensthorpe, Goongarrie.
Clay silicate: dominated by Ni-rich smectites such as nontronite and saponite,
commonly in the mid to upper saprolite and pedolith. Nickel in these minerals is
fixed between structural layers or substitutes for ferric iron in the octahedral
layer, with concentrations up to 4%. Mean grades are generally 1.0-1.5% Ni.
The deposits form from peridotites (mesocumulates and orthocumulates) and are
exemplified by Murrin Murrin and Bulong.
Hydrous Mg silicate: dominated by hydrous Mg-Ni silicates in the lower
saprolite. The silicates are mainly nickeloan varieties of serpentine, talc, chlorite
and sepiolite, many of which are poorly defined and are known informally as
“garnierite”. Globally, these ores have the highest grades (mean 1.8-2.5% Ni),
and are typically found in areas of high relief. In Western Australia, they are
represented only by low grade altered serpentines (e.g., at Ravensthorpe).
Similar minerals also occur in saprolite at the Mt. Keith MKD5 deposit, but this
does not constitute a nickel laterite resource.
The deposits formed under the humid climates prevailing in the Cretaceous to mid-Tertiary,
but have been modified under later arid conditions by the precipitation of secondary silica,
especially over dunites, and magnesite in saprolite.
Enrichment of nickel occurs in the regolith on all originally olivine-bearing ultramafic rocks,
although the amount varies according to the mineralogy of the protolith and its metamorphic
history. The high grade, hydrous-silicate deposits in high relief areas of the humid tropics are
typically developed on ophiolitic olivine-orthopyroxene peridotites (harzburgites).
Conversely, talc-carbonate rocks never give rise to economic concentrations of nickel in the
regolith, although contents are elevated compared to the primary abundance and to other
lithologies.
In addition to bedrock lithology, the formation of nickel laterite, including the type and grade,
is controlled by geological structure, tectonism, climatic and weathering histories, regolith-
landform setting and topography (Table 1). These influence the intensity of weathering, the
drainage status of the regolith at different stages of its development, and the degree of
preservation of the profile.
TABLE 1: Summary of controls on nickel laterite formation
Hydrous Mg silicate Clay silicate Oxide
Climate Humid savanna – Humid savanna; Savanna; modified in
rainforest possibly formed or semi-arid climates
modified in semi-arid
climates
Relief Moderate Moderate to low Moderate to low
Drainage Free Impeded Free or impeded
Tectonism Promoted by uplift Inhibited by uplift. Promoted by uplift
Primary structure Promoted by Enrichment on some Promoted by increased
increased weathering fractures. Possibly weathering and Ni
and Ni enrichment promoted where faults enrichment along open
along open fractures impede drainage. fractures
Primary lithology Peridotite>dunite. Peridotite>>dunite Dunite and peridotite.
(only olivine-rich Component of all
ultramafic rocks). deposits.
Knowledge of the characteristics of nickel laterites is essential for effective exploration for
nickel sulphides in deeply weathered terrain. Higher concentrations of nickel may be
developed in the regolith over barren adcumulates than over similar rocks containing
disseminated or matrix mineralization. Secondary enrichment is commonly focussed along
fractures and shears, and the geochemical data alone may simulate the distributions associated
with weathered sulphide mineralization and associated wall-rock. Discrimination can be
made by use of abundances and ratios of pathfinder elements, such as copper and the
platinum group elements, but the solutions are not unique and wholly reliable diagnostic
criteria have yet to be found.
Reference
Brand, N.W., Butt, C.R.M and Elias, M. 1998. Nickel laterites: classification and features:
AGSO Journal of Australian Geology and Geophysics, 17: 81-88.
