8-IN-1 Slimming Beautify Device ws Thank you very much for choosing this product ! Please read through carefully and understand these instructions before use. @ Please keep it in a safe place for future reference. @ This device is intended for home use and cosmetic purpose only, using this device for treating any medical condition or illness is not supported by the manufacturer.Table of Contents 4, 2. Product Description. Instructions for the Use of Product EMS Operation.. SONIC Operatio FACE RF Operation. BODY RF Operation COLOR LIGHT Operation VIBRA Operation....... INFRARED Operation IONS Operation......... CO-MODE Operatio EMS+VIBRA. EMS+INFRARE SONIC+INFRARI SONIC+IONS........ COLOR LIGHT+VIBRA. COLOR LIGHT+FACE RP... csssccecsseessteceneesseeseesnees 3. Product Specification. 4. Safety Precautions...1. Product Description 8-IN-1 Slimming Beautify Device RF massage robe Ultrasonic wave massage probe Functional display Electrode contact pad ea eB LED Picecs Infrared lamp beads Toggle switch Strength "+" keys Socket of the EMS Electrode Safe conductor Glasses ae2. Instructions for the Use of Products 1. A8-IN-1 slimming beautify instrument adapter(15V,500mA) is plugged into the live socket, and the other end is connected with the product. Then tap the "«" key to start, the display screen will ight up and display mode, function, intensity (category) and other contents, while the mode is in the state of waiting to be selected; Press the "" key for another 3 seconds to shut down the product. . You can press the "MODE" key or the "CO-MODE" key to realize the skin care mode conversion, without turning off the power switch to start other modes; Long press the") " key for 3 seconds to shut down the machine, regardless of which function mode you are using This product should be used under normal conditions, Remember to tum off the power and unplug the adapter when you stop caring for your skin to prevent possible burning or shorten the life of the product due to overheating The ideal usage time for this product is 10 minutes each time. . This product is equipped with a safety control device, when the temperature is too high (exceeding the limit temperature), the function of the product is temporarily trestricted; When the temperature drops to a certain range, the machine can be restarted for use; This device can improve the safety of your products. This product is equipped with a time control device, In the case of no key action, no matter what function mode it works in, it will automatically stop working and shut down after 10 minutes.To continue, press the "0" key again to power on and select the appropriate modes and functions. 6. Avoid using this product for too long in the same part of the body, the product massage probe placed on the skin to move back and forth to avoid the generation of fluctuating energy gathered together, the gathered energy may cause skin discomfort or burns When you use this product, always keep that the massage probe is in full contact with your skin. Incomplete contact can cause significant differences in the interface impedance and energy of the massage probe, and can also cause skin discomfort or risk of burns due to overheating of the product probe. . When you finish using the product, clean the surface of the massage probe in time; It is recommended to clean with a soft cloth to prevent possible scratching; Do not clean this product with water or other chemicals, detergents or cleansers, which may cause product breakdowns or shorten the life of the product Ifyou have any questions or discomfort with the operation of the product after using it, please stop using it immediately and contact your local retailer/distributor. 10. If the product fails, please return the product to the local retailer/distributor, who will help you solve all problems. N 2 B a ~N @ = 02© Instructions for using the EMS 1. Clean your skin with a wet towel for easy massage with EMS electrode patches. 2. Fasten a pair of electrode patches with the EMS lead, the other end is inserted into the EMS output port at the bottom of the product, and then stick the electrode patches on different parts of the body (one anode and one cathode when used). The distance between the two patches should be controlled within 15cm: 3. When the product is powered on, tap the "MODE" key on the front of the product intermittently until the > indicator icon of "EMS" is lit up on the top of the screen, which switches to EMS mode. 4. There are five massage modes to choose from by turning the toggle switch on the right side of the product up and down: Tapping/Massage/Knead /Scrapping /Slimming.Every time you prod it, the corresponding massage mode starts. 5.After choosing the massage method, you can adjust the intensity according to your comfort, and the maximum intensity is 6; Lightly press "+" to increase the strength, and lightly press "-" to decrease the strength. 6. It is recommended that the daily use time should not exceed 10 minutes at the beginning and can be gradually prolonged to 30 minutes after body adaptation . 7. After using this mode, you can switch to another mode according to the instructions or press the " © " key for 3 seconds to shut down 8. Different users, different body parts, different distances between two electrode patches, massage experience will have a more obvious difference. eRecommend some special points of EMS for special functions Chinese acupuncture point. 1) When use TAPPING function, the recommended position is as follows: 1,SHUIDAO(20) BELLY 2.SHUIFEN(6) TIGHTENING 3.GUANYUAN(18) 4.ZHISHI(53) HIP 4. HUANTIAQ(54) TIGHTENING 2. CHENGFU(62)2) When use MASSAGE function, the recommended position is as follows: 7 4. TIANSHU(10) Waist 2. TAIVI(7) BEAUTY 3. DAIMAI(17) 4, SHENYU(47) ~ 3) When use KNEAD function, the recommended position is as follows: 1, GUANYUAN(18) e 2. DACHANGYU(48) 3. ZHONGYUAN(8) @-® mm © \ 4) When use SCRAPPING function, the recommended position is as follows: S 4, FEIYU(44) eo / 2, GANGYU(45) 3. ROUMEN(S) | \ N 1 @ © XN 5) When use SLIMMING function, the recommended position is as follows: ~ S cr DAZHUI(42) . YANGGUAN(52) . ZHONGWAN(8)) WEIGHT . GUANYUAN(18) REDUCTION JULIAO(22) . SHENYU(47) . CHENGFU(62)© Instructions for using the SONIC 1. Clean your skin before use and choose the right skin care products or essence,apply skin care products or essence evenly to the skin . When the product just starts, tap the "MODE" key on the front side of the product, and the » indicator icon will be lit up in front of the "SONIC" in the upper left comer of the screen. At this time, the ultrasonic wave starts to work with low intensity 1 gear. . Gently press the "+" key on the product to increase the strength to the top 2 gear; When the strength is in the second gear, gently press the "-" key on the product to reduce the strength to the first gear;low-intensity massage is mainly used for facial care, high-intensity can be used for other parts of the body massage care, such as arms and thighs. 4. Apply skin care products or essence evenly to the area you want to massage. Remember to keep your skin moist. Apply ultrasonic massage probe to the area of skin you want to massage and move slowly. 5. In this mode, avoid any contact between the massage probe and your bony joints, such as the knee area . 6. After using this mode, you can switch to another mode according to the instructions or press the "©" key for 3 seconds to shut down. © Instructions for using the FACE RF RF is the use of radio-frequency wave directly through the skin, so that cells and molecules form a strong resonance rotation (million times per second) to generate heat energy, so as to achieve the purpose of collagen tissue heating and fat cell heating, making the temperature of the bottom layer of the skin instantly rise, using the stimulation of dermis will produce instant collagen tightening and stimulate collagen regeneration. Radio frequency technology has a good effect in filling wrinkles, eliminating scars, restoring skin elasticity and luster, dissolving fat and slimming. Before using this function, clean the face skin, evenly apply the essence liquid and other daily skin care products.Let the massage head better contact the facial skin and get a better sense of experience. When the product is powered on, tap the "MODE" key on the front of theproduct intermittently until the > indicator icon of "FACE RF" is lit up on the top of the screen, and then switch to FACE RF mode. When switching to this function, the default is 1-level intensity. Stick the metal massage head (including four small massage heads) tightly on the face and move back and forth. Users can adapt to this function through low intensity. 4. The intensity can be adjusted according to your comfort, and the maximum. intensity is 6 gears; Lightly press "+" to increase the strength, and lightly press "~" to decrease the strength; When using this function, the skin contact area will feel itchy and warm, which is a normal phenomenon; The metal massage head should not stay at a certain part for more than 3 seconds, so as not to burn the skin due to long contact time; After using this mode, you can switch to another mode according to the instructions or press the "©" key for 3 seconds to shut down. © Instructions for using the BODY RF Before using this function, clean the skin parts that you want to massage, evenly smear the essence and other daily skin care products.Let the massage head better contact the body skin and get a better sense of experience When the product is powered on, tap the "MODE" key on the front of the product intermittently until the » indicator icon of "BODY RF" is lit up on the top of the screen, and then switch to BODY RF mode. When switching to this function, the default is 1-level intensity. Stick the metal massage head (including four small massage heads) tightly on the face and move back and forth. Users can adapt to this function through low intensity. The intensity can be adjusted according to your comfort, and the maximum intensity is 6 gears; Lightly press "+" to increase the strength, and lightly press “-" to decrease the strength; When using this function, the skin contact area will feel itchy and warm, which is a normal phenomenon; The metal massage head should not stay at a certain part for more than 3 seconds, so as not to burn the skin due to long contact time; After using this mode, you can switch to another mode according to the instructions or press the "()" key for 3 seconds to shut down.© Instructions for using the COLOR LIGHT Before using this function, clean skin and evenly apply daily skincare products. In the product boot state, tap the "MODE" key on the front of the product intermittently until the > indicator icon of "COLOR LIGHT" is lit up on the top of the screen, and then switch to COLOR LIGHT mode. 3. Tap "+" or "-" key to select the appropriate color light source (6 color light sources) according to your needs. After long-term use of colorama irradiation, the skin will have such normal phenomenon as red-hot feeling, potential sebum, acne bulge. 5. After using this mode, you can switch to another mode according to the instructions or press the " ( " key for 3 seconds to shut down. Function description of colorama The function of colorama is to use 390-760nm intense pulse light, direct irradiation on the skin surface. It can penetrate deep into the skin, selectively act ‘on subcutaneous pigments or blood vessels, decompose color spots, close abnormal red blood filaments, remove all kinds of defects on your skin, and at the same time, photon can stimulate subcutaneous collagen proliferation, make original collagen tissue recombination, so as to make pores shrink, wrinkles reduce, skin recover elasticity, health and luster. Red light wavelength is 640nm penetrating skin 1-6mm For skin cell regeneration, promoting humoral circulation, desalinating pigment, relieving pain of allergic skin, activating active ingredients Green light wavelength is 532nm penetrating skin 0.5-2.0mm It has a good sedative effect on sensitive skin and body and mind, Deep repair, beauty whitening, removing yellow and light marks Blue light wavelength is 440nm penetrating skin 1mm Calm allergic skin, remove acne, obvious to clear away acne bacteria Yellow light wavelength is 583nm penetrating skin 1-2mm Ithas the effect of improving skin redness, erythema and relieving the visible capillaries on the face. Purple light wavelength is 430nm penetrating skin 1mm It has the effects of lightening erythema, removing acne and repairing skin Cyan light wavelength is 490nm penetrating skin 1mm Itcan enhance cell energy, promote metabolism and improve skin quality© Instructions for using the VIBRA The vibration frequency can reach 8000-10000 times/min, which can effectively promote the penetration and absorption of skin care products and essence; Continuous high-frequency vibration on the face has a good effect of thin face. 1. Before using this function, clean the skin, evenly apply skin care products or essence to keep the skin fully moist. When the product is powered on, tap the "MODE" key on the front of the product intermittently until the > indicator icon of "VIBRA" is lit up on the top of the screen, and then switch to VIBRA mode. 3. This function has only one working intensity and does not need to be operated by pressing the "+" or "-" key. Put the massage probe close to the part of the body to be cared for. Under the action of high-frequency vibration, skin care product or essence penetrates into the skin. 5. After using this mode, you can switch to another mode according to the instructions or press the ")" key for 3 seconds to shut down. © Instructions for using the INFRARED Far infrared heating function is a very suitable function for skin care. It is not only a beneficial light to the human body, but also an important way to provide nutrition to the skin. Therefore, before using this function, be sure to apply skin care products or essence on the skin When the product is powered on, tap the "MODE" key on the front of the product intermittently until the > indicator icon of "INFRARED" is lit up on the top of the screen, and then switch to the INFRARED function. 2. This function has only one working intensity and does not need to be operated by pressing the "+" or "" key. 3. The product massage probe close to or cling the body to be cared for, infrared light energy will penetrate into the skin, staying for more than ten seconds after there is a warm feeling on the corresponding parts. 4, In far infrared heating mode, do not stay in one part of your body for long periods of time to avoid discomfort or burns. 5. After using this mode, you can switch to another mode according to the instructions or press the ")" key for 3 seconds to shut down.© Instructions for using the IONS Anions can adsorb positively charged dirt such as grease, harmful dust contaminated in the air and cosmetic residues, so as to achieve whitening, repair skin, remove black eye circles, eliminate acne and other effects. 1. When the product is powered on, tap the "MODE" key on the front of the product intermittently until the > indicator icon of "IONS' is lit up on the top of the screen, and then switch to IONS mode. 2. This function has only one working intensity and does not need to be operated by pressing the "+" or "=" key. 3. The product massage probe is close to the body to be nursed, and the anions released by the head act on the skin to achieve the effect of cleansing the skin. 4. After using this mode, you can switch to another mode according to the instructions or press the "©" key for 3 seconds to shut down. © Instructions for using the CO-MODE In order to facilitate the user to operate the two modes of skin care at the same time, six combination modes are set in the product. The operation methods are as follows: 1. When the product is turned on, tap the CO-MODE key on the front of the product intermittently, and the product will be switched between the six combination modes. > EMS+VIBRA In the "EMS" + "VIBRA" combination mode, the > indicator icon of "EMS" and the > indicator icon of "VIBRA" are lit up at the same time on the top of the screen, and other operations are detailed in Steps 4-7 in the EMS function instructions, where VIBRA is an auxiliary function and is normally on in this combination mode; > EMS+INFRARED In the "EMS" + "INFRARED" combination mode, the > indicator icon of "EMS" and the > indicator icon of "INFRARED" are lit up at the same time on the top of the screen, and other operations are detailed in Steps 4-7 in the EMS function instructions, where INFRARED is an auxiliary function and is normally on in this combination mode;> SONIC+INFRARED In the "SONIC" + "INFRARED" combination mode, the > indicator icon of "SONIC" and the > indicator icon of "INFRARED" are lit up at the same time on the top of the screen, and other operations are detailed in Steps 3-5 in the SONIC function instructions, where INFRARED is an auxiliary function and is normally on in this combination mode; > SONIC+IONS In the "SONIC" + "IONS" combination mode, the > indicator icon of "SONIC" and the > indicator icon of "ONS" are lit up at the same time on the top of the screen, and other operations are detailed in Steps 3-5 in the SONIC function instructions, where IONS is an auxiliary function and is normally on in this. combination mode; > COLOR LIGHT+VIBRA In the "COLOR LIGHT" + "VIBRA" combination mode, the » indicator icon of "COLOR LIGHT" and the > indicator icon of "VIBRA" are lit up at the same time on the top of the screen, and other operations are detailed in Steps 3-6 in the COLOR LIGHT function instructions, where VIBRA is an auxiliary function and is normally on in this combination mode; >» COLOR LIGHT+FACE RF In the "COLOR LIGHT" + "FACE RF" combination mode, the > indicator icon of "COLOR LIGHT" and the > indicator icon of "FACE RF" are lit up at the same time on the top of the screen, and other operations are detailed in Steps 3-6 in the COLOR LIGHT function instructions. where FACE RF is the auxiliary function, which is normally open in this combination mode, and the intensity is 3 gears; When a mode does not want to continue using, you can press the operating instructions to switch to other modes, or long press the "()" key for 3 seconds to shut down. N Precautions after use: 1. In the boot state, press the "©" key for 3 seconds to turn off the product power and remove the power adapter from the socket. 2. Remove the EMS wire from the bottom socket of the product, loosen the electrode patch, and put it into the product packaging box. 3. Wipe the massage probe surface and fuselage with a moist towel. 4, Do not use diluents, gasoline or other volatile liquids to clean the product. 5. After the product is cleaned, put it in a packing box for next use.3. Product Specification Product Model: YEO3 Adaptor input power: AC100-240V Adaptor output power: 15V,500mA Dimensions: 174mm*80mm*75mm Packing box size: 218mm*160mm*80mm Weight: 192g Packing list: 8-IN-1 Machine x1 piece Power adaptor x1 piece Electrode conductor x1 piece Electrode contact pad x2 pairs. Safe Glasses x1 pair Product instructions x1 copy4. Safety Precautions A\Warning: Please read the following information carefully before using your machine This product is well-designed precision instrument. In order to have your 8-IN-1 Slimming Beautify Device functioning perfectly, please read the below information thoroughly and follow all the instructions. This will help you to ensure the warranty validity and to extend the life cycle of your product. 4, Store your product away from the humidity and do not use it under water. Otherwise the electronic components of your product may be corroded or have short circuit. Do not store this product anywhere close to the heat source as it can cause malfunction such as shortened product life cycle, twisted or melted plastic components. Do not drop the product or subject it to vibration as it can cause malfunction. Never attempt to disassemble the product yourself. All the product components can only be maintained and repaired by professional technicians. Do not use an adaptor other than the one included in the package. Using incompatible adaptor may result in malfunction and will void the warranty validity. Do not tug the cable when you unplug the power. In order to avoid any bad contact of the equipment, the best way is to hold the plug and unplug it from the socket. Put all the wires together tidily. Do not wind the wires, break the wires surface or cause any other damages. any people with the following conditions must avoid using this product: patients with malignant tumor, women during her pregnancy or period, patients with dermatosis of foci on themorrhage, urgent patient with unidentified discases, and children and elders. Keep this product away from the children. Children shall not play with this product as the disassemble components may be swallowed by the children accidently.8-IN-1 Slimming Beautify Device