®

8250 SERIES
S af ety R elief V alv es
®

The
Original
Self-Aligning
Technology ®

P recis e.

Q u a l i t y.

R eliab le.

SINCE 1958
 8250 VALVE SERIES
®

The Original Self-Aligning Technology

www.taylorvalve.com

8 2 5 0 T H R E A D E D & F L A N G E D V A L V E S
The Taylor 8250 Safety Relief Valve is manufactured in
accordance with the requirements of ASME Boiler and
Pressure Vessel Code, Section XIII, Division 1 for Air/Gas
and Liquid service.
This makes the 8250 an excellent choice for Air,
Gas or Liquid relief applications, including Compressors,
Separators, Heater Treaters, Free Water Knockouts,
Scrubbers, Dehydrators, Thermal Relief, Gas Production
Units,Transmission and Gathering Lines, Chemical Plants,
Refineries, Meter Runs, Gas Plants and other
Industrial Applications.

Taylor Valve is proud to announce the release

of the 8250 Series Relief valve.

Features of the 8250 below:

Designed with the original Self-Aligning technology.

C orifice with pressure to 10,000 psi
L orifice in 3 x 4 and 4 x 6 flanged connections
M orifice in a 4 x 6 flanged connection
Increased capacity in all orifices
Top entry style valve H orifice and larger
API connections available in most flanged connections
All orifices are ASME certified by the National Board of Boiler
and Pressure Vessels in accordance to Sec XIII Div I. for air/gas
and liquid service.

The 8250 redesign is just the beginning of new things to come from Taylor Valve, the Original Self-Aligning
Technology® company. Self-Aligning technology allows for repeatable uses without resetting or repair.
T ab le of Con ten ts
S p e c ific a t io n s
1” 8250 Valve 4
2” 8250 Valve 5-6
3” & 4” 8250 Valves 7
Ma t e r i a l O v e r v i e w
Bill of Materials 8-10
Flow Capacity 11-13
O r d e r in g
Part Numbering system 14-15

3
 ®

®
8250 VALVE SERIES
www.taylorvalve.com The Original Self-Aligning Technology

1 ” T H R E A D E D C O N N E C T IO N S
DIMENSIONS (in)
1” ORIFICE INLET OUTLET
A B C1 C2
THREADED
VALVE 1/2" MNPT 3-1/2 1-7/8 10-3/8 11-11/16
1" FNPT
1/2" FNPT 3-1/4 1-7/8 10-1/8 11-7/16
C, D
1/2" MNPT 3-1/2 1-7/8 10-3/8 11-11/16
1-1/2" FNPT
1/2" FNPT 3-1/4 1-7/8 10-1/8 11-7/16
1/2" MNPT 3-1/2 1-7/8 10-3/8 11-11/16
1/2" FNPT 3-1/4 1-7/8 10-1/8 11-7/16
D 3/4” FNPT
3/4" MNPT 3-1/4 1-7/8 10-1/8 11-7/16
†C /C 3/4" FNPT 3-1/8 1-7/8 10 11-5/16
1 2
3/4" MNPT 3-1/4 1-7/8 10-1/8 11-7/16
3/4" FNPT 3-1/8 1-7/8 10 11-5/16
1" FNPT
1" MNPT 3-1/4 1-7/8 10-1/8 11-7/16
A 1" FNPT 3-1/8 1-7/8 10 11-5/16
C, D, E
3/4" MNPT 3-1/4 1-7/8 10-1/8 11-7/16
3/4" FNPT 3-1/8 1-7/8 10 11-5/16
B 1-1/2" FNPT
1" MNPT 3-1/4 1-7/8 10-1/8 11-7/16
1" FNPT 3-1/8 1-7/8 10 11-5/16

SET PRESSURE RANGE (psi)

† The “C” that corresponds to a ORIFICE C1 C2
particular valve’s overall dimension is C 300-6000 6001-10000
based on set point and orifice size. D 15-2800 2801-5000
E 15-1500 1501-3000

1 ” F L A N G E D C O N N E C T IO N S
1” DIMENSIONS (in)
FLANGED INLET X OUTLET FLANGE CLASSES
ORIFICE
(inches) INLET x OUTLET A B C1 C2
VALVE
150 x 150 4-1/8 4-1/2 11 -
300 x 150 4-1/8 4-1/2 11 -
3/4 x 1
600 x 150 4-1/8 4-1/2 11 -
900/1500 x 300 4-1/8 4-1/2 11 12-5/16
150 x 150 4-1/8 4-1/2 11 -
†C /C 300 x 150 4-1/8 4-1/2 11 -
1 2 1x1
600 x 150 4-1/8 4-1/2 11 -
900/1500 x 300 4-1/2 4-1/2 11-3/8 12-11/16
C, D, E
150 x 150 4-1/8 4-3/4 11 -
A 300 x 150 4-1/8 4-3/4 11 -
1 x 1-1/2
600 x 150 4-1/8 4-3/4 11 -
900/1500 x 300 4-1/2 4-3/4 11-3/8 12-11/16
B 150 x 150* 4-1/8 4-1/2 11 -
300 x 150* 4-1/8 4-1/2 11 -
1x2
600 x 150* 4-1/8 4-1/2 11 -

4
900/1500 x 300 4-1/2 4-1/2 11-3/8 12-11/16
150 x 150 4-7/8 4-3/4 11-3/4 -
300 x 150 4-7/8 4-3/4 11-3/4 -
D, E 1-1/2 x 2
600 x 150 4-7/8 5-1/2 11-3/4 -
900/1500 x 300* 4-1/8 5-1/2 11 12-5/16
* denotes dimensions in accordance to API 526
 ®

®
8250 VALVE SERIES
www.taylorvalve.com The Original Self-Aligning Technology

2 ” T H R E A D E D C O N N E C T IO N S 2”
DIMENSIONS (in) THREADED
ORIFICE INLET OUTLET VALVE
A B C1 C2
1” MNPT 4-1/4 2-5/16 10-1/2 13-7/8
F 2” FNPT
1” FNPT 4-1/4 2-5/16 10-1/2 13-7/8
1-1/2" MNPT 4-1/4 2-5/16 10-1/2 13-7/8
1-1/2" FNPT 4-1/4 2-5/16 10-1/2 13-7/8
F, G 2" FNPT
2" MNPT 4-1/4 2-5/16 10-1/2 13-7/8
†C /C
2" FNPT 4-1/4 2-5/16 10-1/2 13-7/8 1 2

A
† The “C” that corresponds to a particular valve’s
SET PRESSURE RANGE (psi)
overall dimension is based on set point and
orifice size. ORIFICE C1 C2
B
F 15-1500 1501-3000
Use NACE settings marked in parenthesis if
G 15-800 801-2000
different than standard.
(NACE) (15-725) (726-2000)

2 ” F L A N G E D C O N N E C T IO N S
INLET X OUTLET FLANGE CLASSES DIMENSIONS (in) 2”
ORIFICE FLANGED
(inches) INLET x OUTLET A B C1 C2
VALVE
150 x 150* 4-7/8 4-3/4 11-1/8 -
300 x 150* 4-7/8 6 11-1/8 14-1/2
1-1/2 x 2
600 x 150* 4-7/8 6 111-1/8 14-1/2
900/1500 x 300 4-7/8 6-3/8 11-1/8 14-1/2
150 x 150* 4-7/8 4-3/4 11-1/8 -
300 x 150* 4-7/8 6 11-1/8 14-1/2
1-1/2 x 3
600 x 150* 4-7/8 6 11-1/8 14-1/2
†C /C
900/1500 x 300* 4-7/8 6-1/2 11-1/8 14-1/2 1 2

150 x 150 5-1/8 4-3/4 11-3/8 -

300 x 150 5-1/8 4-3/4 11-3/8 14-3/4
F, G 2x2
600 x 150 5-1/8 6 11-3/8 14-3/4
900/1500 x 300 6-1/8 6-3/8 12-3/8 15-3/4 A
150 x 150 5-1/8 4-7/8 11-3/8 -
300 x 150 5-1/8 6 11-3/8 14-3/4
2 x 2-1/2
600 x 150 5-1/8 6 11-3/8 14-3/4
900/1500 x 300 6-1/8 6-3/8 12-3/8 15-3/4 B

150 x 150 5-1/8 4-3/4 11-3/8 -

300 x 150 5-1/8 6 11-3/8 14-3/4
2x3

5
600 x 150 5-1/8 6 11-3/8 14-3/4
900/1500 x 300* 6-1/8 6-3/4 12-3/8 15-3/4
* denotes dimensions in accordance to API 526

NOTE: Taylor Valve reserves the right to change product designs and specifications without notice.
 ®

®
8250 VALVE SERIES
www.taylorvalve.com The Original Self-Aligning Technology

2 ” T H R E A D E D C O N N E C T IO N S TOP ENTRY
DIMENSIONS (in)
ORIFICE INLET OUTLET
A B C1 C2
1-1/2" MNPT 4-1/4 3 14-9/16 16-15/16
1-1/2" FNPT 3-1/2 3 13-13/16 16-3/16
2" FNPT
2" MNPT 4-1/4 3 14-9/16 16-15/16
2” 2" FNPT 3-1/2 3 13-13/16 16-3/16
THREADED “H” H^
1-1/2" MNPT 4-1/4 3 14-9/16 16-15/16
VALVE 1-1/2" FNPT 3-1/2 3 13-13/16 16-3/16
2-1/2" FNPT
2" MNPT 4-1/4 3 14-9/16 16-15/16
2" FNPT 3-1/2 3 13-13/16 16-3/16
^ denotes top entry style valve

†The “C” that corresponds to a particular valve’s SET PRESSURE RANGE (psi)
overall dimension is based on set point and
ORIFICE C1 C2
orifice size.
H 15-320 321-1600
†C /C Use NACE settings marked in parenthesis if (NACE) (15-350) (351-1500)
1 2 different than standard.

2 ” F L A N G E D C O N N E C T IO N S
INLET X OUTLET FLANGE CLASSES DIMENSIONS (in)
ORIFICE
A (inches) INLET x OUTLET A B C1 C2
150 x 150 5-1/8 4-7/8 15-7/16 -
300 x 150 5-1/8 4-7/8 15-7/16 17-13/16
B 1-1/2 x 2
600 x 150 4-7/8 4-7/8 15-3/16 17-9/16
900 x 150 4-7/8 6 3/8 15-3/16 17-9/16
150 x 150* 5-1/8 4-7/8 15-7/16 -
300 x 150* 5-1/8 4-7/8 15-7/16 17-13/16
1-1/2 x 3
600 x 150 4-7/8 6-3/8 15-3/16 17-9/16
900 x 150 4-7/8 6-3/8 15-3/16 17-9/16
150 x 150 5-1/8 4-7/8 15-7/16 -
300 x 150 5-1/8 4-7/8 15-7/16 17-13/16
H^ 2x2
600 x 150 6-1/16 6 16-3/8 18-3/4
900 x 150 6-1/16 6 16-3/8 18-3/4
150 x 150 5-1/8 4-7/8 15-7/16 -
300 x 150 5-1/8 6 15-7/16 17-13/16
2 x 2-1/2
600 x 150 6-1/16 6 16-3/8 18-3/4
900 x 150 6-1/16 6 16-3/8 18-3/4
150 x 150 5-1/8 4-7/8 15-7/16 -
300 x 150* 5-1/8 4-7/8 15-7/16 17-13/16
2x3
600 x 150* 6-1/16 6-3/8 16-3/8 18-3/4
900 x 150* 6-1/16 6-3/8 16-3/8 18-3/4

6
^ denotes top entry style valve
* denotes dimensions in accordance to API 526

NOTE: Taylor Valve reserves the right to change product designs and specifications without notice.
 ®

®
8250 VALVE SERIES
www.taylorvalve.com The Original Self-Aligning Technology
3” THREADED VALVE
3 ” T H R E A D E D C O N N E C T IO N S
DIMENSIONS (in)
ORIFICE INLET OUTLET
A B C1 C2
2" MNPT 5-15/16 3-5/8 16-13/16 -
J
2" FNPT
3" FNPT
5-15/16 3-5/8 16-13/16 -
2-1/2" MNPT 5-15/16 3-5/8 16-13/16 -
†C
3" MNPT 5-15/16 3-5/8 16-13/16 - 1

J^ 2” MNPT 5-15/16 4-1/4 - 18.5

2-1/2" MNPT 3” FNPT 5-15/16 4-1/4 17 18.5
J^, K^
3" MNPT 5-15/16 4-1/4 17 18.5
A
SET PRESSURE RANGE (psi)
The “C” that corresponds to a
† particular valve’s overall dimension ORIFICE C1 C2 C3
is based on set point and orifice size. J 15-540 541-1000 1001-1800
B
(NACE) (15-375) (376-1000) (N/A)
Use NACE settings marked in 3” TOP ENTRY
parenthesis if different than standard. K 15-300 301-650 651-1500 THREADED VALVE
(NACE) (15-250) (251-650) (N/A)
L 451-1250
15-100 101-450
(NACE) (451-800)
M 15-85 86-360 361-1000
(NACE) (15-80) (81-360) (361-700)

3 ” & 4 ” F L A N G E D C O N N E C T IO N S
DIMENSIONS (in) †C /C
INLET X OUTLET FLANGE CLASSES 1 2
ORIFICE
(inches) INLET x OUTLET A B C1 C2 C3
150 x 150 5-3/8 5-7/8 16-1/4 - -
2x3 300 x 150 5-3/8 5-7/8 16-1/4 - -
600 x 150 6-7/8 6-3/4 17-3/4 - - A
150 x 150 6-1/16 5-7/8 16-15/16 - -
2-1/2 x 3 300 x 150 6-1/16 5-7/8 16-15/16 - -
600 x 150 6-3/8 6-3/8 17-1/4 - - B
J 150 x 150 6-1/8 6-3/8 17 - -
3x3 300 x 150 6-1/8 6-3/8 17 - - 3” FLANGED VALVE
600 x 150 7-1/8 6-3/4 18 - -
150 x 150 6-1/8 6-3/8 17-3/4 - -
300 x 150* 7-1/4 7-1/8 18-7/8 20-1/4 -
3x4^
600 x 150* 7-1/4 7-1/8 18-7/8 20-1/4 23-3/4
900 x 150* 7-1/4 7-1/8 18-7/8 20-1/4 23-3/4
150 x 150* 6-1/8 6-3/8 17-3/4 19-1/8 -
300 x 150* 6-1/8 6-3/8 17-3/4 19-1/8 22-5/8 †C /C /C
K 3x4^ 1 2 3
600 x 150* 7-1/4 7-1/8 18-7/8 20-1/4 23-3/4
900 x 150 7-1/4 7-1/8 18-7/8 20-1/4 23-3/4
150 x 150* 6-1/8 6-1/2 19-1/8 22-13/16 -
3x4^
300 x 150* 6-1/8 6-1/2 19-1/8 22-13/16 -
L
300 x 150* 7-1/16 7-1/8 20 23-11/16 30-1/4 A
4x6^
600 x 150* 7-1/16 8 20 23-11/16 30-1/4

7
150 x 150* 7 7-1/4 19-15/16 23-5/8 -
M 4x6^ 300 x 150* 7 7-1/4 19-15/16 23-5/8 30-3/16 B
600 x 150* 7 8 19-15/16 23-5/8 30-3/16
^ denotes top entry style valve
* denotes dimensions in accordance to API 526
 ®

®
8250 VALVE SERIES
www.taylorvalve.com The Original Self-Aligning Technology

1 ” & 2 ” B I L L O F M AT E R I AL S FO R C -G O R I FI CE S
STANDARD CLOSED TOP CONFIGURATION

ITEM STANDARD APPLICATION NACE APPLICATION

17 PART
18 NO CARBON STEEL STAINLESS STEEL CARBON STEEL STAINLESS STEEL
16 1 Seat Frame SA36 CS 316SS SA479 SA36 CS 316SS SA479
2 O-Ring Specify Specify Specify Specify
15 3 O-Ring Specify Specify Specify Specify
4 Insert Holder 304SS SA479 304SS SA479 304SS/316SS SA479 304SS/316SS SA479
14 5 O-Ring Specify Specify Specify Specify
316SS SA479/ 316SS SA479/
6 Seat Body 17-4SS SA564 17-4SS SA564
13 17-4H1150M SA564 17-4H1150M SA564
7 Seat Insert Specify Specify Specify Specify
12 316SS SA479/ 316SS SA479/
81 Disc 17-4SS SA564 17-4SS SA564
17-4H1150M SA564 17-4H1150M SA564
11 9 Spring 17-7SS SA564 17-7SS SA564 Consult Factory* Consult Factory*
10 Spring Keeper 304SS SA479 304SS SA479 304SS SA479 304SS SA479
10 11 Body SA216 GR WCC SA351 CF8M SA216 GR WCC SA351 CF8M
12 1 Adjustment Screw 1018/1020CS A108 304SS SA479 304SS SA479 304SS SA479
19 13 Thread Seal Buna/Steel Buna/Steel Buna/Steel Buna/Steel
14 Flat Washer CS ANSI B18.22.1 18-8SS CS ANSI B18.22.1 18-8SS
20 15 Jam Nut CS ANSI B18.22.1 18-8SS CS ANSI B18.22.1 18-8SS
16 1 O-Ring PC BUNA PC BUNA PC BUNA PC BUNA
9 17 1 Cap CS/ZINC SS CS/ZINC SS
18 Lead Seal Wire SS SS SS SS
8 Data Label
19 SS SS SS SS
20 Drive Screws 18-8 SS 18-8 SS 18-8 SS 18-8 SS
7
* Nace springs- 316SS, MP35N, ELGILOY, OR INCONNEL
6 1
These parts are replaced with Lift Lever option.

5
1/4” FNPT TAP
4 ON SEAT FRAME OPTION LIFT LEVER OPTION

R elief V alv e O ption s

L I FT L E V E R O P T I O N B I L L O F M AT E R I AL S
STANDARD APPLICATION NACE APPLICATION
ITEM PART
CARBON STEEL STAINLESS STEEL CARBON STEEL STAINLESS STEEL
316SS SA479 / 316SS SA479 /
21 LL Disc 17-4SS SA564 17-4SS SA564
17-4H1150M SA564 17-4H1150M SA564
22 Stem Extension 304 SS SA479 304 SS SA479 304 SS SA479 304 SS SA479
23 O-Ring Follower 304 SS SA479 304 SS SA479 304 SS SA479 304 SS SA479
24 O-Ring Specify Specify Specify Specify
25 Adjustment Screw 17-4SS SA564 17-4SS SA564 17-4SS SA564 17-4SS SA564
26 Lift Lever Cap 304 SS SA479 304 SS SA479 304 SS SA479 304 SS SA479
27 Lift Handle Aluminum Bronze Aluminum Bronze Aluminum Bronze Aluminum Bronze
28 Clevis Pin 316 SS SA479 316 SS SA479 316 SS SA479 316 SS SA479
29 Lock Nut Steel Steel Steel Steel

8 R epair K its
All repair kits come with o-rings, thread seal, insert holder, seat holder, disc and seat insert.

NOTE: Taylor Valve reserves the right to change product designs and specifications without notice.
 ®

®
8250 VALVE SERIES
www.taylorvalve.com The Original Self-Aligning Technology

2 ” B I L L O F M AT E R I AL S
H O R I FI CE
T op E n try S tyles

1/4” FNPT TAP

ON SEAT
AT FRAME OPTION
A

STANDARD CLOSED TOP CONFIGURATION

ITEM PART STANDARD APPLICATIONS NACE APPLICATIONS
CARBON STEEL STAINLESS STEEL CARBON STEEL STAINLESS STEEL
1 Body SA216 GR WCC SA351 CF8M SA216 GR WCC SA351 CF8M
2 O-ring Specify Specify Specify Specify
3 O-ring Specify Specify Specify Specify
4 Insert Holder 304 SS SA479 304 SS SA479 304SS/316SS SA479 304SS/316SS SA479
5 O-ring Specify Specify Specify Specify
316SS SA479 / 316SS SA479 /
6 Seat Body 17-4SS SA564 17-4SS SA564
17-4H1150M SA564 17-4H1150M SA564
7 Seat Insert Specify Specify Specify Specify
316SS SA479 / 316SS SA479 /
8 Disc 17-4SS SA564 17-4SS SA564
17-4H1150M SA564 17-4H1150M SA564
9 Spring 17-7SS SA564 17-7 PH SS SA564 Consult Factory* Consult Factory*
10 O-ring Specify Specify Specify Specify
11 Spring Keeper 304SS SA479 304 SS SA479 304 SS SA479 304 SS SA479
12 Bonnet CS SA105 316SS SA479 CS SA105 316SS SA479
13 Adjustment Screw 1018/1020CS A108 304 SS SA479 304 SS SA479 304 SS SA479
14 Thread Seal Buna/Steel Buna/Steel Buna/Steel Buna/Steel
15 Flat Washer CS ANSI B18.22.1 18-8SS CS ANSI B18.22.1 18-8SS
16 Jam Nut CS ANSI B18.22.1 18-8SS CS ANSI B18.2.2 18-8SS
17 O-ring PC BUNA PC BUNA PC BUNA PC BUNA
18 Cap CS/ZINC SS/CF3M CS/ZINC SS/CF3M
19 Lead Seal Wire SS SS SS SS

9
20¹ Data Label SS SS SS SS
21¹ Drive Screws 18-8 SS 18-8 SS 18-8 SS 18-8 SS
* Nace springs- 316SS, MP35N, ELGILOY, OR INCONNEL
¹ These parts are not shown

NOTE: Taylor Valve reserves the right to change product designs and specifications without notice.
 ®

®
8250 VALVE SERIES
www.taylorvalve.com The Original Self-Aligning Technology

3 ” & 4 ” B I L L O F M AT E R I AL S
FO R J-M O R I FI CE S
T op E n try S tyles

STANDARD CLOSED TOP CONFIGURATION

ITEM PART STANDARD APPLICATION NACE APPLICATION
CARBON STEEL STAINLESS STEEL CARBON STEEL STAINLESS STEEL
1 Body SA216 GR WCC SA351 CF8M SA216 GR WCC SA351 CF8M
2 O-ring Specify Specify Specify Specify
3 Insert Holder 304 SS SA479 304 SS SA479 304SS/316SS SA479 304SS/316SS SA479
4 O-ring Specify Specify Specify Specify
316SS SA479 / 316SS SA479 /
5 Seat Body 17-4SS SA564 17-4SS SA564
17-4H1150M SA564 17-4H1150M SA564
6 Seat Insert Specify Specify Specify Specify
316SS SA479 / 316SS SA479 /
7 Disc Ball 17-4SS SA564 17-4SS SA564
17-4H1150M SA564 17-4H1150M SA564
8 Disc Screw B8M SA193 B8M SA193 B8M SA193 B8M SA193
9 Disc Skirt 304 SS SA479 304 SS SA479 304SS/316SS SA479 304SS/316SS SA479
316SS SA479 / 316SS SA479 /
10 Disc Stem 17-4SS SA564 17-4SS SA564
17-4H1150M SA564 17-4H1150M SA564
11 Spring 17-7SS SA564 17-7 PH SS SA564 Consult Factory* Consult Factory*
12 O-ring Specify Specify Specify Specify
13 Spring Keeper 304SS SA479 304 SS SA479 304 SS SA479 304 SS SA479
14 Bonnet Bolts B7 SA193B8 SA193B7 SA193B8 SA193
15 Bonnet CS SA105 316 SS SA479 CS SA105 316 SS SA479
16 Adjustment Screw 1018/1020CS A108 304 SS SA479 304 SS SA479 304 SS SA479
17 Thread Seal Buna/Steel Buna/Steel Buna/Steel Buna/Steel
18 Flat Washer CS ANSI B18.22.1 18-8SS CS ANSI B18.22.1 18-8SS
19 Jam Nut CS ANSI B18.22.1 18-8SS CS ANSI B18.2.2 18-8SS
20 O-ring PC BUNA PC BUNA PC BUNA PC BUNA
21 Cap CS/ZINC SS/CF3M CS/ZINC SS/CF3M
22 Lead Seal Wire SS SS SS SS

10
23¹ Data Label SS SS SS SS
24¹ Drive Screws 18-8 SS 18-8 SS 18-8 SS 18-8 SS
* Nace springs- 316SS, MP35N, ELGILOY, OR INCONNEL
¹ These parts are not shown

NOTE: Taylor Valve reserves the right to change product designs and specifications without notice.
 ®

®
8250 VALVE SERIES
www.taylorvalve.com The Original Self-Aligning Technology

Flow Capacity
WHERE:
V = Volumetric Flow Rate, SCFM
W = Mass Flowrate, lb/hr
Q = Volumetric Flow Rate, GPM
C = constant for Gas or Vapor based on ratio of specific heats, k (Cp/Cv)
A = orifice throat area, square inches
Kd = Rated Coefficient of Discharge
M = molecular weight
P1 = (stamped set pressure + 3 psi or 10%, whichever is greater) + 14.7 psia
Pd = pressure at the discharge of the valve, psia
T = absolute temperature at inlet, °R (degrees Fahrenheit + 460)
slope = value determined by the ASME through testing at the National Board Test Lab, Columbus, OH; for Air and Gas service, SCFM/psia
F = value determined by the ASME through testing at the National Board Test Lab, Columbus, OH; for Liquid service, GPM/ sqrt(PSID)
G = Specific Gravity
Z = compressibility factor for gas or vapor, (=1 if unknown)
Kv = Viscosity Correction Factor calculated from Reynold's Number and Viscosity (=1 if unknown)

FLOW CAPACITY CHARTS & FORMULAS

To determine the relieving capacity which should appear on a valve for a given pressure, use either the Coefficient Method or Slope Method.
M T

COEFFICIENT METHOD SLOPE METHOD

For Gas/Vapor, lb/hr: W=ACKdP1 For Air, SCFM: V=slope . P1
1
For Gas/Vapor, SCFM: V=6.32.CKdP1A For Water, GPM: Q = F P1 - P2
TMZ
For Air (ASME Capacity), SCFM: V=18.331. KdAP1
For Liquid, GPM: Q = 38 . AKdKv P1-P2
G
For Water(ASME Capacity), GPM: Q = 38.AKd P1 - P2

MOLECULAR WEIGHT AND VALUES OF “C” FOR GASES

GAS M C GAS M C
AIR 28.97 356 HYDROGEN 2.02 356
ACETYLENE 26.04 345 HYDROGEN SULFIDE 34.08 348
AMMONIA 17.03 351 METHANE 16.04 346
BUTANE 58.12 324 METHYL CHLORIDE 50.48 337
CARBON DIOXIDE 44.01 345 NATURAL GAS (0.6) 17.40 344
CHLORINE 70.91 352 NITROGEN 28.02 356
ETHANE 30.07 339 OXYGEN 32.00 356
ETHYLENE 28.05 337 PROPANE 44.09 331
FREON 22 86.48 355 SULFUR DIOXIDE 64.06 342

NOTE: Air and Water Flow Charts on following pages.

11
 ®

®
8250 VALVE SERIES
www.taylorvalve.com The Original Self-Aligning Technology

Air Flow Capacity

AIR FLOW CAPACITY VS. PRESSURE (FOR CONDITIONS SHOWN BELOW)
ORIFICE C D E F G H J K L M
ORIFICE DIA. (IN.) 0.281 0.404 0.520 0.674 0.775 1.078 1.350 1.650 2.020 2.280
ORIFICE AREA (SQ.IN.) 0.062 0.128 0.212 0.357 0.472 0.913 1.431 2.138 3.205 4.083
SLOPE 0.998 2.063 3.418 5.742 7.592 14.690 23.038 34.414 51.579 65.711
Kd FACTOR 0.878 0.878 0.878 0.878 0.878 0.878 0.878 0.878 0.878 0.878
SET PRESSURE (PSIG) CAPACITY IN SCFM. OVERPRESSURE = 110% OR 3 PSI, WHICHEVER IS GREATER
67 112 188 248 481 753 1125 1687 2149
78 129 217 286 554 868 1297 1945 2477
88 146 245 324 627 983 1469 2202 2806
98 163 274 362 701 1099 1641 2460 3134
144 238 400 529 1024 1605 2398 3595 4580
257 425 716 947 1832 2872 4291 6432 8194
370 613 1033 1365 2641 4139 6184 9269 11808
484 801 1349 1783 3449 5405 8076 12106 15422
597 988 1665 2201 4257 6672 9969 14942 19037
300 344 710 1176 1981 2619 5065 7939 11861 17779 22651
400 454 937 1551 2613 3454 6682 10472 15646 23453 29879
500 563 1163 1927 3245 4290 8298 13006 19431 29127 37107
600 673 1390 2302 3877 5125 9914 15539 23217 34800 44335
700 783 1617 2677 4509 5961 11531 18073 27002 40474 51564
900 1003 2070 3428 5773 7632 14763 23140 34572 51821 66020
1000 1112 2296 3803 6405 8468 16380 25673 38357 57495 73248
1250 1387 2863 4742 7985 10557 20421 32007 47820 71679
1500 1661 3429 5680 9565 12646 24462 38340 57283
1750 1936 3996 6618 11145 14735 44674
2000 2210 4563 7557 12725 16824
2500 2759 5696 9433 15885
3000 3308 6829 11310 19046
4000 4405 9095
4500 4954 10228
5000 5503 11361
6000 6601
7000 7698
CONDITIONS
8000 8796
Temp (°F) Baro. (psi) Cp/Cv Comp. Factor MW Density Gas Const.
9000 9894
60 14.7 1 1 28.98 0.0764 356
10000 10991

NOTE: Taylor Valve reserves the right to change product designs and specifications without notice.

12
 ®

®
8250 VALVE SERIES
www.taylorvalve.com The Original Self-Aligning Technology

Water Flow Capacity

WATER FLOW CAPACITY VS. PRESSURE (FOR CONDITIONS SHOWN BELOW)
ORIFICE C D E F G H J K L M
ORIFICE DIA. (IN.) 0.281 0.404 0.520 0.674 0.775 1.078 1.350 1.650 2.020 2.280
ORIFICE AREA (SQ.IN.) 0.062 0.128 0.212 0.357 0.472 0.913 1.431 2.138 3.205 4.083
FLOW FACTOR 1.963 4.058 6.722 11.293 14.932 28.890 45.308 67.682 101.440 129.233
Kd FACTOR 0.833 0.833 0.833 0.833 0.833 0.833 0.833 0.833 0.833 0.833
SET PRESSURE (PSIG) CAPACITY IN GPM. OVERPRESSURE = 110% OR 3 PSI, WHICHEVER IS GREATER
17 28 48 63 123 192 287 430 548
19 32 54 72 139 217 325 487 620
21 36 60 79 153 240 358 537 684
23 39 65 86 166 260 389 583 742
30 50 84 111 214 336 502 752 958
42 70 119 157 303 475 710 1064 1356
52 86 145 192 371 582 869 1303 1660
60 100 168 222 429 672 1004 1505 1917
67 111 187 248 479 751 1122 1682 2143
300 36 74 122 205 271 525 823 1229 1843 2348
400 41 85 141 237 313 606 950 1420 2128 2711
500 46 95 157 265 350 678 1062 1587 2379 3031
600 50 104 172 290 384 742 1164 1739 2606 3320
700 54 112 186 314 415 802 1257 1878 2815 3586
900 62 127 211 356 470 909 1425 2129 3192 4067
1000 65 134 223 375 496 958 1502 2244 3365 4287
1250 73 150 249 419 554 1072 1680 2509 3762
1500 80 165 273 459 607 1174 1840 2749
1750 86 178 294 496 655 1987
2000 92 190 315 530 701
2500 103 212 352 593
3000 113 233 385 649
4000 130 269
4500 138 285
5000 146 300
6000 159
7000 172
CONDITIONS
8000 184
Temp (°F) Baro. (psi) SG Back Pressure Kv
9000 195
70 14.7 1 0 1 62.3058
10000 206

NOTE: Taylor Valve reserves the right to change product designs and specifications without notice.

13
 ®

®
8250 VALVE SERIES
www.taylorvalve.com The Original Self-Aligning Technology

P art N u m b erin g S ys tem

825 Y A B C D E F G - HI - JK - L (Disregard HI-JK-L if connections are not flanged)
ORIFICE
Valve Series Flange Face SIZE
Orifice Size Outlet Flange Class
Outlet Pipe Size C
Set Pressure Range
D
Body Configuration Inlet Flange Class
E
Orifice Inlet Pipe Size F
Cold Set Differential Requirement G
Body and Inlet Material H
J
Options
K
Seat Material L
M

CODE
PRESSURE RANGE (Standard Spring 17-7 SS)
ORIFICE
B INLET & OUTLET
“C” “D” “E” “F” “G” “H” “J” “K” “L” “M” SRV 1
1 - 15-40 15-23 - - 15-23 - - 15-25 15-22 0 ½ MNPT X 1 FNPT C&D
2 - 41-100 24-50 15-35 15-25 24-56 15-35 15-20 26-50 23-42 1 ½ FNPT X 1 FNPT C&D
3 300-450 101-215 51-125 36-70 26-50 57-90 36-55 21-35 51-70 43-60
2 ¾ MNPT X 1 FNPT C, D & E
4 451-700 216-350 126-190 71-110 51-79 91-170 56-100 36-60 71-80 61-70
5 701-1300 351-600 191-340 111-180 80-130 171-230 101-140 61-80 81-100 71-85 3 1 MNPT X 1 FNPT C, D & E
6 1301-2600 601-1200 341-700 181-400 131-260 231-320 141-175 81-95 101-190 86-150 4 ¾ FNPT X 1 FNPT C, D & E
7 2601-4000 1201-2000 701-1100 401-600 261-450 321-650 176-250 96-105 191-300* 151-250 5 ¾ MNPT X 1-½ FNPT C, D & E
8 4001-6000 2001-2800 1101-1500 601-950 451-670 651-1000 251-350 106-165 301-450* 251-360
6 1 MNPT X 1-½ FNPT C, D & E
9 6001-8500 2801-3700 1501-2250 951-1100 671-800 1001-1600 351-450 166-250 451-750* 361-660
7 FLANGED
0 8501-10000 3701-5000 2251-3000 1101-1350 801-1500 451-540 251-300 751-1250* 661-1000
10 1351-1500 1501-2000 541-830* 301-400 8 1 FNPT X 1-½ FNPT C, D & E
11 1501-2000 831-1000* 401-550 9 1 FNPT X 1 FNPT C, D & E
12 2001-3000 1001-1800** 551-650 10 ½ MNPT X 1-½ FNPT C&D
13 651-1200**
11 ¾ FNPT X 1-½ FNPT C, D & E
14 1201-1500**
12 ¾ MNPT X 1-¼ FNPT C, D & E
PRESSURE RANGE (NACE Spring 316ST, MP35N, X750, ELGILOY, or Equivalent)
14 ½ MNPT X ¾ FNPT D
CODE ORIFICE
15 ½ MNPT X ¾ FNPT D
“C” “D” “E” “F” “G” “H” “J” “K” “L” “M”
1 - 15-30 15-21 - - 15-25 - - 15-30 15-25 16 ½ FNPT X ¾ FNPT D
2 - 31-90 22-50 15-30 15-25 26-65 15-35 15-25 31-50 26-45 17 ¾ FNPT X ¾ FNPT D
3 300-400 91-200 51-100 31-65 26-45 66-130 36-70 26-45 51-75 46-65 18 ½ FNPT X 1-½ FNPT C&D
4 401-750 201-350 101-200 66-110 46-80 131-250 71-100 46-64 76-100 66-80 SRV 2
5 751-1300 351-600 201-350 111-200 81-140 251-350 101-135 65-85 101-200 81-160
1 2 MNPT x 2-½ FNPT F, G & H
6 1301-2500 601-1200 351-700 201-410 141-300 351-700 136-160 86-100 201-325* 161-270
7 2501-4000 1201-2000 701-1100 411-775 301-555 701-1100 161-180 101-110 326-450* 271-360 3 1-½ FNPT X 2 FNPT F, G & H
8 4001-6000 2001-2800 1101-1500 776-1100 556-725 1101-1500 181-290 111-180 451-800* 361-700 5 1-½ MNPT X 2 FNPT F, G & H
9 6001-10,000 2801-5000 1501-2100 1101-1500 726-1600 291-375 181-250 6 2 MNPT X 2 FNPT F, G & H
0 2101-2750 1501-2000 1601-2000 376-610* 251-390 7 2 FNPT X 2 FNPT F, G & H
10 2001-3000 611-1000* 391-650
8 FLANGED F, G & H
*TOP ENTRY * “L” orifice over 285psi
**FLANGED ONLY shall be 4 x 6 only 9 2 FNPT X 2-½ FNPT G&H
E L AS T O M E R S CH AR T 10 1-½ MNPT X 2-½ FNPT F, G & H
TEMP PRESSURE
MATERIAL APPLICATIONS 13 1 MNPT X 2 FNPT F Only
MIN MAX MIN MAX
Hydrocarbons, H2S, Mineral Oil/Grease, Silicone Oil/Grease, 14 1 FNPT X 2 FNPT F Only
FKM -15 400 15 1000
Chlorinated Hydrocarbons, Fuels SRV 3
Hydrocarbons, CO2, H2S, Dilute Acids, Water and Steam Less Threaded: Max Set 1000psi J/650psi K
HNBR -25 325 15 1000
than 300°F
2 2 MNPT X 3 FNPT J ONLY
EPDM -70 500 15 1000 Glycols, Organic Acids, Inorganic Acids, Hydraulic Fluids, Solvents
PTFE -420 450 250* 2000 Cryogenics, Strong Acids, Amines 3 3 FNPT X 3 FNPT J ONLY
PC BUNA -30 250 15 1000 Hydrocarbons, CO2, Dilute Acids, Water, H2S 4 2-½ MNPT X 3 FNPT J&K

14
PEEK -60 450 1000 10000 Dilute acids, Glycol, Methanol, Aldehyds, Esthers, Water 7 3 MNPT X 3 FNPT J&K
*Consult Taylor Valve for optional pressure configurations.
8 FLANGED J, K, L
SRV 4 - TOP ENTRY FLANGED ONLY
NOTE: Taylor Valve reserves the right to change product designs and specifications without notice. 4 4x6 L&M
 ®

®
8250 VALVE SERIES
www.taylorvalve.com The Original Self-Aligning Technology

V
ORIFICE CODE COLD SET DIFFERENTIAL BODY & INLET MATERIAL TOP STYLE / OPTIONS
CODE ORIFICE REQUIREMENT CODE MATERIAL CODE SERIES
1 J CODE TEMPERATURE 3 CARBON STEEL 0 OPEN Lift Lever (LL)
2 K 1 AMBIENT 5 STAINLESS STEEL 1 CLOSED TOP
3 L 6 CS BODY/SST INLET* 3 CLOSED Lift Lever
4 C or D 7 CS BODY/316 INTERNALS** 4 NACE
5 E or G 8 SS BODY/316 INTERNALS** 5 1/4 NPT TAP^^
6 F CS BODY/SS SEAT FRAME/ 6 LL w/1/4 NPT TAP^^
9 8 Lift Lever/NACE
7 H 316 INTERNALS*
8 ^ 17-4 SST (STANDARD INT) 9 1/4 TAP/NACE^^
M
* N/A- H, J, K, L, M (TOP ENTRY, BODY/SF, ONE PC DESIGN) ^^THREADED ONLY
** 316INT MAX PRESSURE RATING 2800 PSI
Note: C ORIFICE PRESSURES OVER 4001 PSI 17-4 SEATFRAME ONLY
F ORIFICE FOR 2"FNPT PRESSURES OVER 2800 PSI 316 SEATFRAME ONLY

ELASTOMER MATERIALS
1 VITON O TEFLON SEAT/NEOPRENE O-RINGS G PEEK SEAT/KALREZ O-RINGS
2 TEFLON SEAT/VITON O-RINGS B TEFLON SEAT/PC BUNA O-RINGS H PC BUNA SEAT/KALREZ O-RINGS
5 PEEK SEAT/VITON O-RINGS C TEFLON SEAT/EPDM O-RINGS J PEEK SEAT/EPDM O-RINGS
7 PC BUNA D TEFLON SEAT/LO-TEMP NBR O-RINGS I PEEK SEAT/LO-TEMP NBR O-RINGS
9 EPDM (ETHYLENE PROPYLENE) E PEEK SEAT/PC BUNA O-RINGS M TEFLON SEAT/AFLAS O-RINGS
F TEFLON SEAT/KALREZ O-RINGS W PEEK SEAT/JW EOL 101 O-RINGS
Note: C Orifice Teflon or PEEK inserts only depending on pressure
HI HI - INLET FLANGE SIZE & CLASS
L Orifice Teflon only over 50 psi
M Orifice Teflon inserts only

H PIPE SIZE I FLANGE CLASS

SRV 1 - C, D, E 0 150
0 3/4” 1 300
1 1” 3 600
3 1-1/2” 4 900 (under 2.5” pipe use 1500 option,

4 2” 5 1500
SRV 2 - F, G, H
JK - OUTLET FLANGE SIZE & CLASS
JK
3 1-1/2”
J PIPE SIZE K FLANGE CLASS
4 2”
SRV 1 - C, D, E 0 150
5 2-1/2”
1 1” 1 300 (NO J, K, L, or M)
6 3”
3 1-1/2” 3 600 (NO J, K, L, or M)
SRV 3 - J, K, L 4 2”
4 2” (J ONLY) SRV 2 - F, G, H
5 2-1/2” (J ONLY) 4 2” FLANGE SEAL FACES (Inlet & Outlet)
6 3” TOP ENTRY 5 2-1/2” TYPE AVAILABILITY
SRV 4 - L & M 6 3” 0 RFF X RFF SRV 1, 2, 3, 4
7 4” TOP ENTRY SRV 3 - J, K, L 1 RFF X RTJ SRV 1 & 2
6 3” (J ONLY) 2 RTJ X RFF SRV 1 & 2
7 4” TOP ENTRY 3 RTJ X RTJ SRV 1 & 2
SRV 4 - L & M
8 6” TOP ENTRY

EX: 825E4351311 Set @ 135 psi EX: 825G485151B-43-40-0 Set @ 75 psi

825 - 825 - 8250 Series Relief Valve 825 - 8250 Series Relief Valve
E - “E” Orifice G - “G” Orifice
4 - Spring Range of 126-190 4 - Spring Range 51-79
3 - 1”MNPT X 1”FNPT Connections 8 - Flanged Connection’s
5 - “E” Orifice 5 - “G” Orifice

15
1 - Ambient Operating Temperature 1 - Ambient Set
3 - Carbon Steel Body 5 - Stainless Steel Body
1 - Closed Top 1 - Closed Top
1 - Viton Seat and O-Rings B - Teflon Seat and PC Buna O-Rings
43 - 2” SIZE / CLASS 600 Flange Inlet
40 - 2” SIZE / CLASS 150 Flange Outlet
0 - RFF X RFF Flanged Sealing Faces
 ®

Taylor Valve Technology

8300 S.W. 8th Street
Oklahoma City, Oklahoma 73128

TEL 405.787.0145
FAX 800.805.3401
WEB www.taylorvalve.com
EMAIL [email protected]

P recis e.

Q u a l i t y.

R eliab le.
1/18/2024