PREPARATION OF A CUPBOARD
A PROJECT REPORT
Submitted by
MUHAMMADSINAN.E(Reg. No:2201020635),MURSHID SHIBLI(Reg.
No:2201020646),MUHAMMED FARSIN.KK(Reg. No:2201020639),MUHAMMED
HANAN.PP(Reg.No:2201023995),MUHAMMEDFASIL.K(Reg.No:2201020640),MU
HAMMED NABEEL.M(Reg. No:2201020643),MUHAMMED SINAN.PC(Reg.
No:2201020645),ASHIF.K(Reg. No:2201023988),SAYYID MUHAMMED
ARSHAD.VT(Reg. No:2201020650),MUDHASSIR.C(Reg. No:2201020993),
SHITHIN.M(Reg. No:2201020652),AMEEN MUHAMMAD(Reg. No:2201023987),
MUHAMMED AFLAH.NK(Reg. No:2201020636),MUHAMMED
FIRSAD.KP(Reg. No:2201020641),MUHAMMED FAHIS.PK(Reg.
No:2201020638),SALMANUL FARIS.A(Reg. No:2201020649),
to
the department of technical education, Government of Kerala in partial fulfillment of the
requirements for the award
of
Diploma in Mechanical Engineering
MA’DIN POLY TECHNIC COLLEGE
MELMURI – PO, MALAPPURAUM
MARCH – 2020
DECLARATION
We undersigned hereby declare that the project report “PREPARATION OF A CUPBOARD
”submitted for partial fulfillment of the requirements for the award of diploma in Mechanical
Engineering of the Department of technical education, Government of Kerala is a bonafide
work done by us under supervision of MR. ASHIQUE NK, MR.VINEESH KUMAR This
submission represents our ideas in our own words and where ideas or words of others have
been included; we have adequately and accurately cited and referenced the original sources.
we also declare that we have adhered to ethics of academic honesty and integrity and have not
misrepresented or fabricated any data or idea or fact or source in my submission. We
understand that any violation of the above will be a cause for disciplinary action by the
institute or the Department of technical education and can also evoke penal action from the
sources which have thus not been properly cited or from whom proper permission has not been
obtained. This report has not previously formed the basis for the award of any diploma.
Place Signature
Date Name of the student
DEPARTMENT OF MECHANICAL ENGINEERING
MA’DIN POLYTECHNIC COLLEGE
MELMURI. P.O, MALAPPURAM
CERTIFICATE
This is to certify that the PROJECT entitled PREPARATION OF A CUPBOARD
MUHAMMADSINAN.E(Reg.No:2201020635),MURSHIDSHIBLI(Reg.No:2201020646),M
UHAMMEDFARSIN.KK(Reg.No:2201020639),MUHAMMED
HANAN.PP(Reg.No:2201023995),MUHAMMEDFASIL.K(Reg.No:2201020640),MUHAM
MED NABEEL.M(Reg. No:2201020643),MUHAMMED SINAN.PC(Reg.
No:2201020645),ASHIF.K(Reg. No:2201023988),SAYYID MUHAMMED
ARSHAD.VT(Reg.No:2201020650),MUDHASSIR.C(Reg.No:2201020993),SHITHIN.M(Re
g. No:2201020652),AMEEN MUHAMMAD(Reg. No:2201023987),MUHAMMED
AFLAH.NK(Reg. No:2201020636),MUHAMMED
FIRSAD.KP(Reg.No:2201020641),MUHAMMED
FAHIS.PK(Reg.No:2201020638),SALMANUL FARIS.A(Reg. No:2201020649)
Submitted to the Department of technical education, Government of Kerala in partial
fulfillment the requirements for the award of the Diploma in Mechanical Engineering is a
bonafide record of the project work carried out by him under my supervision and guidance.
Guide:
Mr. ASHIQUE NK Mr. JITHESH NP
Trade Instructor Head of Department
Ma’din Polytechnic college Dept. of Mechanical engg.
Ma’din Polytechnic college
Place:
Date:
Internal examiner (Dept. Seal) External examiner
ACKNOWLEDGEMENT
We would like to express our profound gratitude to Mr. ABDUL HAMEED C.P, the
Principal, for permitting us to do the project and offering adequate time duration. We hereby
place in record our sincere gratitude to Mr. JITHESH NP, Head of the Department,
Mechanical Engineering for the continuous support. We are also thankful to our project guide
Mr. NABEEL N, Lecturer in Mechanical Engineering for providing us valuable ideas
regarding our project and all other assistance.
We are grateful to all Lecturers of Mechanical Engineering Department and other staff of
MPTC for providing all facilities and suggestions for the success of this project. Finally, we
extend thanks to our dear parents and friends who helped us to build up confidence.
LIST OF TABLES
No. Title Page No.
2.1 Xxxxxxxxxxxxxxxxxxx 9
2.2 Xxxxxxxxxxxxxxxxxxx 15
Xxxxxxxxxxxxxxxxxxxxxxx
3.1 Xxxxxxxxxxxxxxxxxxxxxx
…………………………………..
4.1 Xxxxxxxxxxxxxxxxxx
………………………………….
LIST OF FIGURES
TITLES PAGE NO
FIG.1 3
FIG.2 5
FIG.3 6
FIG.4 6
FIG.5 7
FIG.6 8
FIG.7 8
FIG.8 9
FIG.9 10
FIG.10 11
FIG.11 11
FIG.12 12
FIG.13 12
FIG.14 14
FIG.15 14
FIG.16 13
FIG.17 17
ABBREVIATIONS
(List in alphabetical order)
HASH High Altitude Simulation
LMTD Logarithmic Mean Temperature Difference
PDF Probability Density Function
……………………………………..
…………………………………….
NOTATION
(List in alphabetical order)
A Area, m2
E Voltage, V
Re Reynolds number T Temperature, K
…………………….
Greek Symbols
α Diffusivity, m2/s
τ Shear stress, MPa
…………………………….
…………………………….
Superscripts
……………………….
Subscripts
………………………..
CHAPTER 1
INTRODUCTIO
1.1 GENERAL BACKGROUND
Research is a process of arriving at an appropriate solution to a problem through a
systematic approach ………… …………… ……………
…………… ………… ………… …………………………… ……………
…………………………….. philosophy. (Leave 12 pt spaces after paragraph)
There may be various reasons for conducting research. In the case of market
research
…………………………………………………………………………………………
……….. brand.
Research is a process of arriving at an appropriate solution to a
problem through systematic approach ……………… ……………… ………..
……… ……………………… ………… ………… ………… ………
…………………… …………….. philosophy
There may be various reasons for conducting research. In case of
market research more specifically ………………… …………
…………………………
……………….. ……… … ………… …………… ………
…………… …… ……………… …………… … …….. brand.
CHAPTER 2
LITERATURE SURVEY
2.1 THEORETICAL INVESTIGATIONS
……. ………………. ……………… …………..……… ….………. … optimization
studies.
………… ……………. ……………… …………………. ……………….
……...
Fig.2.5 Variation of xxxxxxxxx xxxxxxxxx xxxxxxxxx xxxxxxx (David, 2014)
(Title of figures to be given below the figure)
……………………………………………………………………………………………
……………………………………………………………………………………………
Table 2.3 Effect of voltage …………………………………………
(Title of table is to be given above the table)
Sl.
Voltage Current Force (N) Power
No (mV) (mA) (W)
1 Nn Mm xx.x yy.yy
2 Nn Mm xx.x yy.yy
3 Nn Mm xx.x yy.yy
4 Nn Mm xx.x yy.yy
5 Nn Mm xx.x yy.yy
6 Nn Mm xx.x yy.yy
7 Nn Mm xx.x yy.yy
The effect of …………… ………… …… … …………… …………… …………
CHAPTER 3
METHODOLOGY
3.1 MATERIALS
……. ………………. …………….. ………………… ………….. … ……………….
……………
………… ……………. ……………… …………………. ……………….
……...
…………………. ………………. …………………………. …………
CHAPTER 4
RESULTS AND DISCUSSION
4.1 XXXXXXXXXXX
The results of various…………….. …………….. ……… …………… ……….....
………….. ……………. …………… …………….. …………. …………………
…….......
………………. Fig. 4.1 shows ….. ………… ……………… …………….. …………………
Fig. 4.1 Variation of nitrate concentration in different medium
………… ……………. …………….. ………………..
………………….
…………………… ………. …………….. ………………..
…………………
…………….. ………………………….. …………………….. ………………… …
CHAPTER 5
CONCLUSION
The ………….. ……………. …..…………….. …………….. ……… ……………
……….....
………….. ……………. …………… …………….. …………. …………………
…….......
………………. ….. ………… ……………… …………….. …………………
REFERENCES
1] Andrews, G.E and D.Bradley (1972) The Burning Velocity of Methane-Air Mixtures,
Combustion & Flame, 19, 275-288
2] Bruun,H.H (1976) A Note on Static and Dynamic Calibration of Constant temperature
Hot-wire Probes, J.Fluid.Mech, 76, 145-155
3] Bradshaw,P. An Introduction to Turbulence and its Measurement, Pergamon Press,
1971.
4] E.E.Reber, R.L.Michell and C.J.Carter, Oxygen absorption in the earth‟s
atmosphere, Aerspace Corp., Los Angeles, CA, Tech. Rep. TR-0200 (4230-46)-3,
Nov 1988.
5] G.O.Young, Synthetic structure of industrial plastics, in Plastics, 2nd Ed., Vol.3,
6] J.U.Duncombe, Inrared navigation – Part I : An Assessment of feasibility, IEEE
Trans. Electron Devices, Vol. ED-11, No.1, 34-39, Jan 1959
7] Lefebvre,A.H. (1965) Progress and Problems in Gas Turbine Combustion, 10th
Symposium (International) on Combustion, The Combustion Institute, Pittsburg,
1129- 1137.
8] Transmission Systems for Communications, 3 rd Ed., Western Electric Co., Winston
– Salem, NC, 1985, 44-60.
APPENDICES
(Same format as that of chapters)
A.1 XXXXXXXXX
…………………………………….. …………………………. ………………
…………………..
……………. ……………
…………………………………………………………………………………………………
……
…………………………….
LIST OF PUBLICATIONS
(Same format as that of chapter)
