INFO SHEET

POSPAC UAV
NOW WITH POST-PROCESSED CENTERPOINT® RTX™ SERVICE
POSPac UAV is Applanix’ industry-leading
INDUSTRY LEADING
differential GNSS-aided inertial post-processing
software for georeferencing data from the SOFTWARE Key Features
Trimble APX series of board sets flying on
► POSPac UAV is integrated with Applanix’ ► cm-level post-processed DGNSS position
small UAVs. POSPac UAV turns your UAV into
industry leading IN-Fusion™ GNSS-Aided accuracy
a low-cost, highly efficient, professional grade
Inertial processing technology for: • removes the need for Ground Control
mapping solution compatible with cameras,
LiDAR and other mapping sensors. • robust, centimeter level position and Points in aero-triangulation (AT)
orientation information worldwide • achieve cm level accuracy in LiDAR
DIRECT GEOREFERENCING without reference stations point cloud

FOR UNMANNED AERIAL • maintaining full accuracy before and ► Accurate GNSS position translation from
Antenna Phase Center (APC) to sensor
VEHICLES after GNSS outages
origin
• no restriction on minimum number of
POSPac UAV coupled with a Trimble APX UAV satellites • eliminates the need to estimate offset
GNSS-inertial system delivers the benefits of in AT which results in better accuracy
• fly turns without limiting bank angles
Direct Georeferencing to aerial surveyors flying • obtains cm level accuracy in LiDAR
=> faster turns
small UAVs: point cloud
► POSPac UAV also includes Applanix ► High accuracy orientation
► Achieve high accuracy position and SmartBase Cloud for generating a set
orientation ready for map production, of observations for a virtual base station • strengthens the geometry in the AT
minutes after data collection exactly where and when you need it, and block which reduces or eliminates
emails it to your inbox ready for Differential sidelap
► Eliminate or reduce the need for Ground
GNSS processing (where available) • obtains cm level accuracy in LiDAR
Control Points
point cloud
► Fly less sidelap for greater effciency ► Speeds up processing time of AT by
► Map inaccessible and dangerous areas YOUR BENEFITS improving point matching success and
remotely with lower cost blunder detection
► Reduced acquisition costs
► 200 Hz Georeferencing solution
► Reduced re-work costs with “know before
WHY POST-PROCESSING? you go” in field quality control
• filters out bad GNSS observables
• improves heading accuracy
POSPac UAV post-processing produces ► Faster production • reduces interpolation errors to sensor
a higher accuracy and more robust sampling times
► Better accuracy
georeferencing solution that can be generated
► Increased utilization ► Automatically survey in dedicated base
in real-time, all within minutes of flying.
stations direct from POSPac using Trimble
► It uses “gap-free” dedicated base station CenterPoint® RTX™
data or that from a CORS service instead • streamline map production workflow
of corrections over a radio link that can be
► Full transformation support
jammed or interrupted.
• user selectable datums and projections
► It uses the inertial data to bridge outages
• transformation to camera Exterior
in the rover GNSS receiver data to ensure a
Orientation
continuous, gap free position and orientation
solution. ► Optional PP-RTX subscription for mapping
without base stations (Fast Regions)
► It improves the accuracy of both the position
and orientation (especially heading), by ► Optional LIDAR QC Tools for UAV module for
running the data forward and reverse in time. LIDAR
For more information, visit:
► Map without base stations using PP-RTX www.applanix.com/products/dg-uavs • Boresight calibration
subscription service • LiDAR-based Corrected SBET
trajectory
• Point Cloud generation
© 2020, Trimble Inc. All rights reserved. Trimble and the Globe & Triangle logo are trademarks of Trimble Inc., registered in the United States and in other countries. Applanix and the Applanix logo are
trademarks of Applanix Corporation, registered in the Canadian Patent and Trademark Office and other countries. InFusion and SmartBase are trademarks of Applanix Corproation. All other trademarks
are the property of their respective owners. Information subject to change without notice.

TRANSFORMING THE WAY THE WORLD WORKS