Save a life with innovation
Continuous VF analysis
Continuous VF analysis is available on AED-3100. With this function, the ECG waveform can be analyzed even during
CPR and energy charging starts before the shock is advised. This helps you deliver faster defibrillation than ever before.
Analyzing Shock Press flashing
heart rhythm advised SHOCK button
Conventional
CPR VF analysis Charging
AED mode
Analyzing Shock Press flashing
heart rhythm advised SHOCK button
Continuous CPR VF analysis
VF analysis VF analysis
(Background)
Charging
Fast analysis and charging
It takes less than 15 seconds from turning the power on to discharge. Faster charging time helps you deliver energy
quickly when VF is observed.
Specifications
Energy Adult: 150-200-200J Child: 50-70-70J
Instruction by voice, CPR timing sound 100 times / minute (option)
User interface
Indicator (green/red), shock button, adult/child key
Capacity: 200 discharges or 7.5 hours monitoring
Battery
Stanby life: 4 years
Analysis time less than 8 seconds, minimum 4.5 seconds
Form turn on to discharge less than 15 seconds (with new battery)
Size 206(W) x 252(D) x 97(H) mm
Weight 2.3 kg with battery and pads, 1.9 kg without battery and pads
Vibration: MIL-STD-810F 514.5C category 4 and category 9, EN1789
Standard
Water and dust proof: IP55
Options
• Battery Pack (SB-310V) • AED Box (YZ-042H8) • Defibrillation Pads (P-740K)
This brochure may be revised or replaced by Nihon Kohden at any time without notice.
8251 CAT.No.64-043 ’15.9. CLB. E.
Printed in Japan
Automated External Defibrillator
AED-3100
Take action,
Always be ready
During daily self-test, AED checks automatically its
condition including battery, pads and failure of circuit.
You can see your AED condition with simple status
indicator.
In emergency situation, AED-3100 always be ready to
save a life.
Within the reach of anybody
AED should be easy and intuitive to use for anybody. Even if you are not a medical professional,
AED-3100 is ergonomic design for you to use it without doubt and interruption.
STEP 1 STEP 2 STEP 3
STEP 1 Open the lid
Open the lid to turn on the power. The voice instruction starts
immediately to guide you how to operate AED.
STEP 2 Attach the pads to the patient
After attaching the pads, AED immediately starts to analyze ECG.
Defibrillation pads have the colors (blue/orange) to make you easy to
attach the pads as illustrated.
STEP 3 Push the button
If the shock is needed, the shock button is flashing. Push the button to
deliver the electrical shock to the patient.
Save a life
Safe and efficient treatment
International resuscitation guideline* recommends to reduce the energy for
child patient to avoid burning of heart muscle. AED-3100 can reduce the
energy to 50/70J just by switching the energy switch to child position. No
need to change the pad and require any other action.
* American Heart Association Guidelines for
CPR and ECC/ European Resuscitation Guidelines
Durable and compact
AED-3100 has wide range of operating temperature from
-5˚C to 50˚C. As it comply with IP55 standard, it can be
used in severe circumstances. Also, AED-3100 is 40%
smaller compared with previous model, AED-2100K.
AED-3100 has compact body which you need no large
space to install, and you can bring it easily to
emergency site.
Automated External Defibrillator
AED-3100
