1.

An Inverse system is said to be invertible if it satisfies the_________

(1). Output cannot be zero for any input
3
(2). Output cannot be constant for two different inputs
(3). Both 1 & 2 (4). None of the above
2. Which of the following systems are invertible
d 2
y(t ) = ( x(t ))
(1). y(t ) = Cos( x(t )) (2). y(t ) = x(t−3) (3). dt (4). All the above
3. Which of the following systems are static
d 1
2 y(t ) = ( x(t ))
(1). y(t ) = 2 x(t ) (2). y(t ) = x(t ) (3). dt (4). All the above
4. 2
d d
y(t ) = 2 x(t )+3 2 x(t ) = x(t )
A system having differential equation dt dt is______ 4
(1). Linear (2). Time invariant (3). Causal (4). All the above
5. The input and output of a continuous time system are respectively denoted by x(t)
and y(t). Which of the following descriptions corresponds to a causal system?
3
(1). y(t) = x(t – 2) + x(t + 4) (2). y(t) = (t – 4) x(t + 1)
(3). y(t) = (t + 4) x(t – 1) (4). y(t) = (t + 5) x(t + 5)
6. The transfer function of a system y(t) = 2x(t) + 3x(t-1) is______
(1). H (ω) = 2+3 Cos ω (2). H (ω) = 2+3 Cos ω− j3 Sinω 2
(3). H (ω) = 2+3 Sin ω (4). H (ω) = 2−3 Sinω+ j3 Cos ω
7. The response of LTI system has impulse response h(t) for an input x(t) is given
by___
∞ ∞ ∞
y(t) = ∫ x(τ )h(τ )dτ y(t) = ∫ x(t+τ)h(t)dt y(t) = ∫ x(τ )h(t−τ )dτ 3
(1). −∞ (2). −∞ (3). −∞
(4). None of the above
8. The characteristics of distortion less system have_______
(1). Magnitude Response is Constant 4
(2). Phase Response is Linear (3). Bandwidth is Infinity (4). All the above
9. The transfer function of a High pass RC circuit is______
1 1
H (ω) = H (ω) =
(1). 1+ jω RC (2). 1− jω RC 1
1
H (ω) =
(3). jω RC (4). H (ω) = 1+ jω RC
10. The bandwidth of RC low pass circuit in terms of Hz _________
1 1 2
B.W . = B.W . =
(1). RC (2). 2 π RC (3). B.W . = 2π RC (4). None of the above
11. A causal system is said to be physical realizable if its impulse response satisfies
the conditions are_________
∞ ∞
ln |H (ω)|
∫ |H( ω)| dω < ∞
(1). −∞
2
(2).
∫
−∞ 1+ω 2
dω < ∞
(3). both 1 & 2
3

(4). None of the above

12. A system which does not have a unique relation between its input and output is 4
called
(1). Non-linear system (2). Non-causal system
 (3). Time-variant system (4). Non-invertible system
13. Laplace transform of x(t) is defined by_______
∞ ∞
X(s)= ∫ x(t) e dt −st
X(s)= ∫ x(t) e st dt
(1). −∞ (2). −∞ 1
∞
X(s)= ∫ x(t) e−jwt dt
(3). −∞ (4). None of the above
14. Inverse Laplace transform of X(s) is defined by_______
σ + jω σ+ jω
1 1
x(t ) = ∫ X (s) e st ds x(t ) = ∫ X (s) e st ds
(1).
2 σ− jω (2).
2πj σ− jω 2
σ + jω
1
x(t ) = ∫
2 π σ− jω
X ( s) e st ds
(3). (4). None of the above
15. The Laplace transform of x(t) is convergence if,_______
∞ ∞
∫
(1). −∞
|x(t)e −st
|dt = ∞ ∫
(2). −∞
|x(t)|dt ≥ ∞
∞ ∞ 4
∫
(3). −∞
|x(t )e−st|dt ≻ ∞ ∫
(4). −∞
|x(t )e−st|dt ≺ ∞
16. Which of the following is not an essential element of a communication system?
d
a) Transmitter b) Transducer c) Receiver d) Communication Channel
17. A device which provides output in electrical form or it has input in electrical form
is called a ____. d
a) Transmitter b) Receiver c) Repeater d) Transducer
18. Decrease in signal strength due to energy losses is called _____.
c
a) Distortion b) Interference c) Attenuation d) Noise
19. The disturbance or distortion in the transmission and processing of message
signals is called ______. a
a) Noise b) Attenuation c) Interference d) None of these
20. A repeater is a combination of _____.
b
a) Receiver b) Amplifier c) Transmitter d) All of these