SUBZERO GELTRAP™
EU07068B Raw materials from SEPPIC
BODY CARE
SEPINOV™ EMT 10
Formula Hydroxyethyl Acrylate / Sodium Acryloyldimethyl Taurate
Copolymer
A Aqua/Water Up to 100% Powder polymer «2-in-1», thickening in a wide pH range (3-
SEPINOV™ EMT 10 0.9% 12), ready to use, with an excellent stabilizing properties at
low level and in presence of a high % of oily phase.
Glycerin 14%
Sensory profile: “satin” touch, fresh, glide-on.
BIOPLASMA BG 1%
B EASYNOV™ 2% BIOPLASMA BG
White GELTRAP™ LANOL™ 99 6% Aqua/Water/Butylene Glycol/Plankton Extract
Phenoxyethanol & Ethylhexylglycerin 0.5% Water soluble active extracted from Sahel micro-algae
Packaging: tube scenedesmus which shows cell detoxification and antiaging
Parfum/Fragrance 0.3%
properties.
Thirst quenching body care
EASYNOV™
GELTRAP™ offers moisturizing and emollient Octyldodecanol and Octyldodecyl Xyloside and PEG-30
properties even with a low percentage of oily Dipolyhydroxystearate
phase Liquid lipophilic emulsifier. EASYNOV realizes emulsions
with an internal gelled aqueous phase extra-rich in water by
its very fresh texture is easily absorbed
a cold process with gentle stirring: the GELTRAP emulsions.
without leaving a sticky effect even with 14% This novel formulation form offers surprising textures,
of glycerin! marrying freshness and cushion effect.
BIOPLASMA BG, derived from a micro-algae
which grows in the desert, strengthens the LANOL™ 99
epidermal hydrolipidic barrier. Isononyl Isononanoate
Emollient agent.
Procedure
TRIMIX: 5kg
Incorporate SEPINOV™ EMT 10 into the water and the glycerin. Mix until
homogeneous and add BIOPLASMA BG. Separately combine phase B
ingredients, add them in one step onto the gel then mix gently until
obtaining GELTRAP .
Characteristics
Appearance White
Viscosity 1M at RT 95000 mPa.s Brookfield S4S6
Viscosity 1M at 45°C 92000 mPa.s Brookfield S4S6 Other raw materials…
Viscosity recovery at RT 95000 mPa.s Brookfield S4S6
(after 1M at 45°C)
Stability* At RT /45°C/ thermal cycles -5°/ +40°C • Phenoxyethanol and Ethylhexylglycerin : Euxyl PE9010 (SCHÜLKE
& MAYR)
• Fragrance : Coffee Dream (357) (SYMRISE)
EU07068B - 1411
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any
compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has
been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the
preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the
hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status. www.seppic.com
* Our stability protocols are available at your request.