ATR 72-500 WHITE PAPERMODELS

©2023 Edwin Rodriguez and Mario Solorzano

PAPERMODELS

AIRLINE LOGO HERE

THERE WAS TEXT HERE

WHAT IT SAID
BUT I DIDN'T KNOW

OIL LEVEL

TO OPEN PUSH FLAP

CAPT EXIT SALIDA

F/O

EXIT
FLAP

STATIC PORTS
DO NOT PLUG OR DEFORM HOLES
AREA WITHIN RED LINE MUST BE
STBY SMOOTH AND CLEAN CITYCRAFT

LEVER N°1

TO CLOSE PARA ABRIR

1- UNLOCK FOLDING STRUT (SEE INSTRUCTIONS INSIDE).
LEVER N°2 2- OPEN FLAP FOR ACCES TO CARGO DOOR CONTROL PANEL. HALE LA PALANCA HACIA ABAJO
3 - PRESS SELECTOR TO CLOSE UNTIL DOOR IS COMPLETELY CLOSED.
4 - FOLD BACK LEVER N°2 ITS RECESS.
5 - DEPRESS HANDLE OF LEVER N°1 AND FOLD IT BACK ITS RECESS.
TO OPEN
TO OPEN 6 - MAKE SURE GREEN LIGHT IS OFF AND BLUE LIGHT IS ON PULL LEVER FULY DOWN
1- PUSH FLAP TO GRASP HANDLE OF LEVER N°1 (DOOR LOCKED IN CLOSED POSITION). AND SELECTOR
2- DEPRESS HANDLE AND PULL LEVER N° 1 FULLY DOWN RETURN TO NEUTRAL POSITION
3 - PULL LEVER N° 2 FULLY DOWN. 7 - CLOSE FLAP GIVING ACCESS TO CARGO DOOR CONTROL PANEL.
4 - OPEN FLAP FOR ACCES TO CARGO DOOR CONTROL PANEL.
5 - MAKE SURE THAH GREEN LIGHT IS ON.
6 - PRESS SELECTOR TO OPEN UNTIL DOOR.
IS COMPLETELY OPEN.
CAUTION
IN CASE OF ACTUATOR FAILURE DO NOT FORCE THE DOOR INTO
7 - MAKE SURE SELECTOR RETURNS TO NEUTRAL POSITION.
OPEN OR CLOSE POSITION. BUT USE APPLICABLE PROCEDURE
8- LOCK FOLDING STRUT (SEE INSTRUCTIONS INSIDE).

ACCESS TO CARGO DOOR CONTROL PANEL

72-500
ATR 72-500 N/A

ACTUAL AIRCRAFT
IMAGE HERE
AIRLINE HISTORY HERE
(IN FLIGHT)

The ATR 72 is a twin-engine turboprop, short-haul regional airliner developed and produced in France and
Italy by aircraft manufacturer ATR (French: Avions de transport régional or Italian: Aerei da Trasporto ACTUAL AIRCRAFT
Regionale), a joint venture formed by French aerospace company Aérospatiale (now Airbus) and Italian IMAGE HERE
aviation conglomerate Aeritalia (now Leonardo S.p.A.). The number "72" in its name is derived from the
aircraft's typical standard seating capacity of 72 passengers.
(ON GROUND)
During the 1980s, French aerospace company Aérospatiale and Italian aviation conglomerate Aeritalia
merged their work on a new generation of regional aircraft

Scale: 1:120 Attach the parts in order.

Length: (226mm) A1 - D6
Width: (225mm) You can choose to make either a grouded style (With Wheels)
Parts: N/A (5 pages) or an in-flight style (without wheels) aircraft.
AIRLINE LOGO WATERMARK
*This model is designed for papercraft and is different in several ways from the real plane COLOR #f2f2f2ff
*Build the model by carefully watching the Assembly Instructions video.
*The final size of the model may vary slightly depending on the configuration of your printer

© 2023 CityCraft and Hermercraft Scale 1:120 01/05