20X32X7 HMSA10 VRadial shaft
seal with rubber outside diameter
and single sealing lip, for oil or
grease
Radial shaft seal with rubber outside diameter and
single sealing lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine
components, or between components in relative motion. HMSA10 seals
are designed with a rubber outside diameter. They have a conventional
sealing lip made of elastomer. A garter spring in the seal and a
non-contacting auxiliary lip optimize the sealing against the shaft also in
polluted environment.
• High pumping rate
• Higher contamination exclusion with dust lip
• With garter spring
• Accommodate misalignment
Overview
Dimensions
Shaft diameter 20 mm
Housing bore diameter 32 mm
Seal width 7 mm
Performance Properties
Maximum operating temperature 200 °C Design HMSA10
Minimum operating temperature -20 °C Auxiliary lip Yes
Permissible circumferential speed 14.9 m/s Sealing lip material Fluoro rubber (FKM)
Rotational speed 14 220 r/min Type of outside diameter Rubber metal reinforced
Unit system Metric
Generated from www.skf.com on 2023-11-02 Page 1 of 3
Technical Specification
Type of outside diameter Rubber metal reinforced
Lip material Fluoro rubber (FKM)
Seal design HMSA10
Compliance with standard ISO 6194, DIN 3760
Dimensions
d1 20 mm Shaft diameter
D 32 mm Housing bore diameter
b 7 mm Seal width
Application and operating conditions
Operating temperature min. -20 °C
Operating temperature max. 200 °C
Operating temperature, short periods max. 200 °C
Circumferential speed max. 14.9 m/s
Rotational speed max. 14 220 r/min
Pressure differential 0.05 N/mm²
Associated products
SKF Speedi-Sleeve 99078
Generated from www.skf.com on 2023-11-02 Page 2 of 3
Terms and conditions
By accessing and using this website / app owned and published by AB SKF (publ.)
(556007-3495 · Gothenburg) (“SKF”), you agree to the following terms and conditions:
Warranty Disclaimer and Limitation of Liability
Although every care has been taken to assure the accuracy of the information on this website / app, SKF
provides this information "AS IS" and DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. You acknowledge that your use of this website / app is at your sole risk, that you assume full
responsibility for all costs associated with use of this website / app, and that SKF shall not be liable for any
direct, incidental, consequential, or indirect damages of any kind arising out of your access to, or use of the
information or software made available on this website / app. Any warranties and representations in this
website / app for SKF products or services that you purchase or use will be subject to the agreed upon terms
and conditions in the contract for such product or service. Further, for non-SKF websites / apps that are
referenced in our website / app or where a hyperlink appears, SKF makes no warranties concerning the
accuracy or reliability of the information in these websites / apps and assumes no responsibility for material
created or published by third parties contained therein. In addition, SKF does not warrant that this website /
app or these other linked websites / apps are free from viruses or other harmful elements.
Third Party Services
When viewing YouTube content via the SKF website(s) (i.e. using YouTube API Services), you agree to be
bound by the YouTube Terms of Service.
Copyright
Copyright in this website / app copyright of the information and software made available on this website /
app rest with SKF or its licensors. All rights are reserved. All licensed material will reference the licensor that
has granted SKF the right to use the material. The information and software made available on this website /
app may not be reproduced, duplicated, copied, transferred, distributed, stored, modified, downloaded or
otherwise exploited for any commercial use without the prior written approval of SKF. However, it may be
reproduced, stored and downloaded for use by individuals without prior written approval of SKF. Under no
circumstances may this information or software be supplied to third parties.
This website /app includes certain images used under license from Shutterstock, Inc.
Trademarks and Patents
All trademarks, brand names, and corporate logos displayed on the website / app are the property of SKF or
its licensors, and may not be used in any way without prior written approval by SKF. All licensed trademarks
published on this website / app reference the licensor that has granted SKF the right to use the trademark.
Access to this website / app does not grant to the user any license under any patents owned by or licensed to
SKF.
Changes
SKF reserves the right to make changes or additions to this website / app at any time.
Generated from www.skf.com on 2023-11-02 Page 3 of 3
