6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Electrical Engineering Home FAQ Shop Contact Us

Relay Settings Calculations

By Protection Engineer / May 23, 2019

This technical report refers to the electrical protection of all 132kV

switchgear. These settings may be re-evaluated during the
commissioning, according to actual and measured values. Protection
selectivity is partly considered in this report and could be also re-
evaluated. The names of parameters in this calculation may differ from
those in the appropriate device.

Technical Data of the Lines

Main Line

Conductor Type ACSR Lynx

https://elec-engg.com/relay-settings-calculations/ 1/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Length 27.8 km

Type ZM Type Tower

Positive sequence impedance 0.1583 + j0.4004 (0.431 ∠68.4°) Ω/ km

Zero sequence impedance 0.3246 + j1.228 (1.27 ∠75.2°) Ω/ km

Current capacity (A) 487

Next Line

Conductor Type ACSR Lynx

Length 36 km

Type ZM Type Tower

Positive sequence impedance 0.1583 + j0.4004 (0.431 ∠68.4°) Ω/ km

Zero sequence impedance 0.3246 + j1.228 (1.27 ∠75.2°) Ω/ km

Current capacity (A) 487

https://elec-engg.com/relay-settings-calculations/ 2/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

SEL 311 – Line Protection

Protection Settings Calculations for Lines

SEL-311C Distance Protection Settings
Distance Zone
Non-Homogeneous Correction Angle
Load Impedance and Load Encroachment
Power Swing Detection/ Out of Step Detection
Switch on to Fault (SOTF)
Fuse failure scheme OR Loss of Potential (LOP)

https://elec-engg.com/relay-settings-calculations/ 3/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

SEL-351A Back-up Over Current Settings

Back up over current settings

Technical Data of the Power Transformers

Transformers-1

Type of cooling ONAN / ONAF

Vector Group Dyn11

Rated Voltage HV (V) 132000

https://elec-engg.com/relay-settings-calculations/ 4/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Rated Voltage LV (V) 11500

Full Load current HV (A) 87.48 / 113.72

Full Load current LV (A) 1004.12 / 1305.35

Rated Power (MVA) 20 / 26

% impedance at the normal tap (12 no.) 10.15% / 13.20 %

Type of tap changer On load

the voltage at the maximum tap (V) 145200

Voltage at the minimum tap (V) 118800

Transformers- 2

Type of cooling ONAN / ONAF

Vector Group Dyn11

Rated Voltage HV (V) 132000

Rated Voltage LV (V) 11500

Full Load current HV (A) 43.7 / 56.9

Full Load current LV (A) 502 / 652.7

https://elec-engg.com/relay-settings-calculations/ 5/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Rated Power (MVA) 10 / 13

% impedance at the normal tap (12 no.) 10.15% / 13.20 %

Type of tap changer On load

The voltage at the maximum tap (V) 145200

Voltage at the minimum tap (V) 118800

https://elec-engg.com/relay-settings-calculations/ 6/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

SEL-787 Transformer Protection Relay

Protection Settings Calculations for Power Transformers

https://elec-engg.com/relay-settings-calculations/ 7/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

SEL-787 Transformer Differential Protection

Differential Pick-up
Slope-1 Setting
Slope-2 Setting
Differential Unrestrained (U87P (Un-restrained Differential Pick-up))
2nd HARMONIC
5th HARMONIC

SEL-351A Transformer HV Over Current

Pick-up Setting
51PP (for phase fault element)
Sea

https://elec-engg.com/relay-settings-calculations/ 8/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

51GP (for earth fault element)

Time Multiplier Setting

Mail:
saeed6185
[email protected]
om

SEL-551C Feeder Over-Current and Earth Fault

11 kV Outgoing Protection Settings

SEL-551C LT Over-Current and Earth Fault
CDG21 LT Neutral Standby AC series Earth Fault

https://elec-engg.com/relay-settings-calculations/ 9/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

PREVIOUS NEXT

job Join Industrial Automation Engineeri…

126 thoughts on “Relay Settings Calculations”

Pothiraj May 23, 2019 at 12:35 pm

https://elec-engg.com/relay-settings-calculations/ 10/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

I need transformer differential protection in micom and siemens siprotec relay

Reply

Protection Engineer May 23, 2019 at 1:20 pm

This page may help u : https://elec-engg.com/siemens-transformer-

protection-relay-testing-with-quick-cmc/

Reply

timothy March 5, 2020 at 12:11 am

thanks

Reply

saeed March 8, 2020 at 4:40 am

thanks for your comment

Reply

https://elec-engg.com/relay-settings-calculations/ 11/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

kapil August 23, 2019 at 12:59 pm

i am looking at REM 615 – motor protection relay setting calculations, stuck up

at relay/motor curve (hot/cold)?

Reply

Er. Fatima November 19, 2020 at 11:21 am

on your email

Reply

Rashid Rahman January 7, 2022 at 1:41 pm

Can i get a copy of relay setting calculations.

Thanks

Reply

https://elec-engg.com/relay-settings-calculations/ 12/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Er. Fatima January 8, 2022 at 4:17 am

text us on WhatsApp:+989129613659

Reply

nk August 28, 2019 at 4:59 pm

Please share some relay setting calculations excels ,pdf or doble or RIO test kit
calculation files if you have any so that we could purchase it on this website ?

THANKS …

Reply

ravi ranjan April 26, 2020 at 5:55 am

sir
please share calculation sheet of GE D60 and SEL Distance elay.

Reply

https://elec-engg.com/relay-settings-calculations/ 13/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

saeed April 28, 2020 at 2:38 pm

do not have sheet of GE D60 and SEL Distance relay

Reply

Ravi Ranjan August 29, 2020 at 7:44 am

SIR
I need line protection calculation 21/21G calculation sheet

Reply

Y.P. Chen May 23, 2020 at 2:47 am

Dear Sir,
I need line protection calculation (21/21G) using SEL-311c
Thanks!

Reply

https://elec-engg.com/relay-settings-calculations/ 14/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

saeed May 24, 2020 at 3:27 am

please check your email

Reply

Khalid Oki W September 17, 2020 at 1:15 pm

Please share relay calculation excel sheet

Reply

Protection Engineer September 18, 2020 at 7:48 am

kindly check ur email for Relay Settings Calculations / Helpful

Excel Spreadsheets for Protection Engineers

Reply

https://elec-engg.com/relay-settings-calculations/ 15/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Juve Villadelgado February 23, 2021 at 5:50 pm

Please send also relay setting calculation excel thank you

kamel asaad June 5, 2020 at 8:51 pm

HOW CAN I DOWNLOAD?

Reply

saeed June 6, 2020 at 5:58 pm

Please check your email for Relay Settings Calculations

Reply

Sourav Chakraborty July 11, 2020 at 6:15 am

https://elec-engg.com/relay-settings-calculations/ 16/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Please send relay settings calculation

Reply

Er. Fatima November 19, 2020 at 11:31 am

check your email

Reply

Sonam Jimmy January 23, 2021 at 5:43 am

I also need this file. Please share

Reply

Juve Villadelgado February 23, 2021 at 5:51 pm

Please send also relay setting calculation excel thank you

Reply

https://elec-engg.com/relay-settings-calculations/ 17/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Ariel Tambis September 7, 2022 at 9:21 am

Can I also have a copy of the relay settings calculations? Thanks

Reply

Protection Engineer September 8, 2022 at 4:02 am

plz txt on WhatsApp: +989129613659

Reply

Kevin March 25, 2021 at 8:20 pm

Sir please send relay calculation tutorial and excel sheet

Thank you

Reply

https://elec-engg.com/relay-settings-calculations/ 18/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

saeed March 26, 2021 at 3:49 am

this file is for our users only, you should enroll in any of our training
packages like DIGSI 4, DIGSI 5, PCM600, ETAP, ABB PCM 600 ..

Reply

kousik mitra June 8, 2020 at 9:10 pm

I need protection grading, Simulation excel, for 33/11kV voltage level protection .
OC (IDMT + HIGH STAGE) AND EF (same as OC) only.. please help.

Reply

kousik mitra June 8, 2020 at 9:11 pm

cant download from this page.. please help…

Reply

https://elec-engg.com/relay-settings-calculations/ 19/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

saeed June 10, 2020 at 5:24 am

has been sent to ur email pls check for Relay Settings Calculations

Reply

saeed June 10, 2020 at 5:24 am

please check ur email for Helpful Excel Spreadsheets for Protection Engineers

Reply

Dibyendu Das June 22, 2020 at 3:22 pm

May I get this sir?

Reply

Er. Fatima November 19, 2020 at 11:31 am

https://elec-engg.com/relay-settings-calculations/ 20/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

would u plz check your email, dear?!

Reply

Bruce sekatane July 1, 2020 at 8:27 pm

Sir,

How do we download the helpful spreadsheets on this site?

Reply

saeed July 4, 2020 at 5:46 am

Pls check ur email

Reply

Angela July 2, 2020 at 8:47 pm

Could you please send me a copy of the PDF thank you.

https://elec-engg.com/relay-settings-calculations/ 21/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Reply

saeed July 4, 2020 at 5:33 am

Yes, pls check ur email

Reply

Vijay July 14, 2020 at 8:03 am

Dear sir, kindly share relay settings excel sheet

Reply

dinesh mahajan July 15, 2020 at 10:25 am

dear sir,
please share transformer protection relay settings calculation

Reply

https://elec-engg.com/relay-settings-calculations/ 22/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

saeed July 15, 2020 at 5:08 pm

Dear dinesh , pls check ur email Relay Settings Calculations

Reply

Ammad Asghar July 15, 2020 at 4:29 pm

Please share relay calculation excel sheet

Reply

saeed July 15, 2020 at 4:55 pm

replied on ur email

Reply

vassana July 21, 2020 at 1:21 pm

https://elec-engg.com/relay-settings-calculations/ 23/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Please sent to me for relay calculation

Reply

saeed July 21, 2020 at 2:03 pm

kindly check ur email

Reply

keejeong July 25, 2020 at 1:06 pm

Dear Sir
How can i download ?

Reply

saeed July 26, 2020 at 11:33 am

Dear keejeong, pls check ur email for Relay Settings Calculations

Reply

https://elec-engg.com/relay-settings-calculations/ 24/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Shihab Abdulvahid July 31, 2020 at 11:33 am

Please share relay calculation excel sheet

Reply

saeed July 31, 2020 at 6:07 pm

pls check ur email

Reply

Tahir August 9, 2020 at 7:52 am

Sir,

How do we download the helpful spreadsheets on this site?

Reply

https://elec-engg.com/relay-settings-calculations/ 25/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

saeed August 9, 2020 at 9:08 am

pls check ur email

Reply

Shivakishore August 12, 2020 at 6:04 pm

Kindly send the complete relay settings calculations

Reply

Er. Fatima November 19, 2020 at 11:33 am

check your email, dear Shiva

Reply

mijaz September 4, 2021 at 7:04 am

https://elec-engg.com/relay-settings-calculations/ 26/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Send me MV Motor Relay setting Up To 800Kw.

Reply

Protection Engineer September 4, 2021 at 12:39 pm

please txt your request on WhatsApp: +989129613659

Reply

kire August 23, 2020 at 6:54 am

Link for downloading relay setting calculation, please

Reply

Er. Fatima November 19, 2020 at 11:34 am

check your email, Kire

Reply

https://elec-engg.com/relay-settings-calculations/ 27/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Duc Pham September 1, 2020 at 11:24 pm

Sir, how do i download these calculation on this site

Reply

Protection Engineer September 3, 2020 at 3:24 am

pls check ur email for RELAY SETTINGS CALCULATIONS

Reply

Borkhuu Tungalagsaikhan December 9, 2023 at 10:50 pm

please send me RELAY SETTINGS CALCULATIONS

Reply

https://elec-engg.com/relay-settings-calculations/ 28/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

saeed January 27, 2024 at 6:29 am

ok

Reply

MUSTAFA TATAR September 17, 2020 at 9:18 am

How can i download it?

Reply

Protection Engineer September 18, 2020 at 7:46 am

pls check your email

Reply

Khalid Oki W September 17, 2020 at 1:16 pm

https://elec-engg.com/relay-settings-calculations/ 29/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Please share relay calculation excel sheet

Reply

Protection Engineer September 18, 2020 at 7:48 am

Details have been sent to your email with subject: Relay Settings
Calculations / Helpful Excel Spreadsheets for Protection Engineers

Reply

Ryan Johnson September 28, 2020 at 3:01 pm

Please share relay calculation excel sheet.

Relay Settings Calculations / Helpful Excel Spreadsheets for Protection
Engineers

Reply

Protection Engineer September 29, 2020 at 12:10 pm

https://elec-engg.com/relay-settings-calculations/ 30/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Kindly check your email, you should be a member of our website to

access these files.

Reply

Kiran October 6, 2020 at 4:17 pm

Please share relay calculation excel sheet….

Reply

Protection Engineer October 7, 2020 at 5:27 am

yes, pls check your email

Reply

SANDEEP BISWAL October 7, 2020 at 1:33 pm

pls send me

Reply

https://elec-engg.com/relay-settings-calculations/ 31/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Protection Engineer October 9, 2020 at 5:48 am

This product is free for our customers only, and unfortunately, your
email is not on our customer list. You can buy any of our training
packs (DIGSI 4, DIGSI 5, IEC 61850, ETAP, PSCAD, …), then you can
access our free files.

Reply

BBao November 6, 2020 at 3:30 am

How i can download this document? I work at power company, my company use
some protection relay, SEL, Siemens, Schneider, GE,…I need this document, pls
send to my email. Thanks

Reply

Er. Fatima November 7, 2020 at 6:05 am

kindly check your email.

https://elec-engg.com/relay-settings-calculations/ 32/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Reply

Viktor Hrycek November 12, 2020 at 12:34 pm

Dear sir,
can you please send me calculation spreedsheats?

Reply

Protection Engineer November 13, 2020 at 3:10 pm

please check your email for detail

Reply

Suganya November 29, 2020 at 2:16 pm

Dear sir/madam,
Could you please share the setting calculation document.
Thank you in advance!

https://elec-engg.com/relay-settings-calculations/ 33/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Reply

Er. Fatima December 5, 2020 at 9:58 am

emailed to u

Reply

Vinod kumar Maddineni December 15, 2020 at 7:49 pm

Hi

I would like to take course . How do I go about it?

Reply

Protection Engineer December 16, 2020 at 5:04 am

Hi, kindly check your email for Protection Relay pack

Reply

https://elec-engg.com/relay-settings-calculations/ 34/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

aeerlyshr December 17, 2020 at 9:54 am

do you have GE d60 setting calculator ?

Reply

Protection Engineer December 18, 2020 at 11:09 am

Do not have GE d60 setting calculator

Reply

Shashank Ramteke December 18, 2020 at 5:26 am

Hi, I need Simulation excel sheet for 50/51, 51N, 64R, 87T, 49 and 59 relays..
please help.

Reply

https://elec-engg.com/relay-settings-calculations/ 35/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Kamal January 29, 2021 at 6:31 pm

Could you please send me a copy of the PDF thank you.

Reply

Protection Engineer January 29, 2021 at 9:47 pm

kindly check your email for Relay Settings Calculations

Reply

manoj malik February 6, 2021 at 5:57 am

Please provide the relay calculation exel sheets

Reply

Er. Fatima February 6, 2021 at 6:26 am

https://elec-engg.com/relay-settings-calculations/ 36/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

plz send your request on our WhatsApp: +989129613659

Reply

Mahmoud February 23, 2021 at 8:20 pm

How can i download the relay setting calculation?

Reply

saeed February 23, 2021 at 9:07 pm

check ur email pls Relay Settings Calculations

Reply

Maggie Xu February 26, 2021 at 10:22 pm

Can you please send me the relay settings calculations excel files? Thank you!

Reply

https://elec-engg.com/relay-settings-calculations/ 37/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

saeed February 27, 2021 at 5:26 am

kindly check ur email for details

Reply

Maggie Xu February 26, 2021 at 11:10 pm

Could you please share the relay settings calculations spreadsheet? thank you!

Reply

saeed February 27, 2021 at 5:26 am

yes, please check ur email for Relay Settings Calculations

Reply

https://elec-engg.com/relay-settings-calculations/ 38/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Maggie Xu March 1, 2021 at 12:26 am

Checked but didn’t receive any. Please send again. Thank you!

Reply

Sebe Mulumbwa March 5, 2021 at 9:33 am

Kindly assist with transformer diff, line protection, etc PDF and Excel
calculations. I will be grateful.

Reply

saeed March 5, 2021 at 3:17 pm

pls check ur email for the Helpful Excel Spreadsheets for Protection Engineers

Reply

https://elec-engg.com/relay-settings-calculations/ 39/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

JESUS March 6, 2021 at 7:58 am

Hello, I am needing this material please send them to me.

Best regards,

Jesus Silva

Reply

saeed March 7, 2021 at 3:10 am

Hello, please check your email for details

Reply

Angel March 12, 2021 at 8:59 pm

Can you share calculations spreadsheet for protection engineers?

Reply

https://elec-engg.com/relay-settings-calculations/ 40/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

saeed March 13, 2021 at 4:29 am

pls check ur email

Reply

S Dasgupta March 26, 2021 at 6:54 am

Dear Sir/Madam,

Please send the download link to my mail address

Thanks and Regards,

S Dasgupta

Reply

saeed March 26, 2021 at 12:01 pm

Hi Dasgupta
Please check your email for the Relay Settings Calculations

https://elec-engg.com/relay-settings-calculations/ 41/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Reply

Netsanet Melaku April 3, 2021 at 9:36 am

I need distance protection calculation with tapping.

Reply

Protection Engineer April 4, 2021 at 2:19 am

This training package is not competed yet, we will update you once it
is done

Reply

BRYAN OVIEDO April 9, 2021 at 2:01 am

PLEASE SEND INFORMATION … MY EMAIL. THANKS SO MUCH

Reply

https://elec-engg.com/relay-settings-calculations/ 42/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Protection Engineer April 10, 2021 at 4:11 am

sent to ur email
please check your email for the topics of the Helpful Excel
Spreadsheets for Protection Engineers

Reply

[email protected] April 15, 2021 at 9:11 pm

How to set 49M IN 7SK82

WHAT IS TIME CONSTANT & K FACTOR HOW TO ARRIVE THESE VALUE

Reply

Er. Fatima April 16, 2021 at 7:47 pm

Join our WhatsApp groups and share your problem there. text on WhatsApp
plz: +989129613659

Reply

https://elec-engg.com/relay-settings-calculations/ 43/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Chintan Varia April 16, 2021 at 9:16 am

Hello Sir/Madam,

I need HT Motor Protection Relay setting calculations for Siemens 7SJ61, 7SJ66,
and 7SK80

Reply

Er. Fatima April 17, 2021 at 6:02 am

Please contact Elec-Engg support team on WhatsApp. number:

+989129613659

Reply

Chintan Varia April 16, 2021 at 10:43 am

Hello Sir/Madam.

https://elec-engg.com/relay-settings-calculations/ 44/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

I need HT Motor Protection Relay Setting Calculations for Siemens 7SJ61, 7SJ66,
and 7SK80.

Reply

Pecobian April 29, 2021 at 11:31 am

Please send relay settings calculation

Reply

nouman May 18, 2021 at 7:44 am

please send me spread sheets

Reply

Protection Engineer May 18, 2021 at 12:41 pm

kindly check your email

Reply

https://elec-engg.com/relay-settings-calculations/ 45/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Anil Chaudhari June 5, 2021 at 6:04 pm

Please send me excel sheet for relay settings & calculations.

Reply

Protection Engineer June 7, 2021 at 2:20 am

please check your email for the Relay Settings Calculations

Reply

Jovi June 16, 2021 at 8:43 am

Please share the Relay Settings Calculations and excel files as well.

Thanks

Reply

https://elec-engg.com/relay-settings-calculations/ 46/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Protection Engineer June 16, 2021 at 8:54 am

sent to your email

Reply

mixed2546 June 25, 2021 at 8:38 am

I need SEL-311C Distance protection settings calculation.

Reply

Er. Fatima June 25, 2021 at 9:04 am

plz text our support team on WhatsApp: +989129613659

Reply

mixed2546 June 25, 2021 at 9:08 am

https://elec-engg.com/relay-settings-calculations/ 47/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Can you send to be via emails.

Reply

remigijus September 27, 2021 at 4:13 pm

Hello, i am looking RET615 differential protection calculation example. Could you

help me?

Reply

Er. Fatima September 28, 2021 at 4:47 am

plz ask your question on WhatsApp: +989129613659

Reply

fouad zaidan December 22, 2021 at 1:23 pm

How can we download

[email protected]

https://elec-engg.com/relay-settings-calculations/ 48/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Reply

Er. Fatima December 23, 2021 at 5:35 am

for this req, txt us plz on whatsapp: +989129613659

Reply

Rintu September 6, 2022 at 4:15 pm

Can I get any spreadsheet for Motor Protection relay REM 615 or any other
motor protection relay?

Reply

Er. Fatima September 7, 2022 at 8:19 am

plz txt on WhatsApp: +989129613659

Reply

https://elec-engg.com/relay-settings-calculations/ 49/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Suryareddy November 24, 2022 at 9:47 am

Can you please send me a copy of the calculation sheet and calculation notes
[email protected]

Reply

Leave a Comment

Your email address will not be published. Required fields are marked *

Type here..

Name* Email* Website

https://elec-engg.com/relay-settings-calculations/ 50/51
6/25/24, 9:18 PM Relay Settings Calculations – Electrical Engineering

Post Comment

Facebook Youtube Blog Google+ LinkedIn Subscribe WhatsApp

Copyright © 2024 Electrical Engineering

https://elec-engg.com/relay-settings-calculations/ 51/51