SDG1000 Series DataSheet

Data Sheet
Function/Arbitrary Waveform Generator
 DDS technology, dual-channel output
 125MSa/s sample rate, 14bit vertical
resolution.
 5 types of standard output waveform,
built-in 46 arbitrary waveforms(include DC)
 Complete set of modulation functions: AM,
FM, PM, FSK, ASK, PWM,
linear/logarithmic sweep, burst
 Abundant input/output: waveform output,
Synchronous signal output, External
modulation source input, 10MHz clock Application fields:
input, external trigger input, internal trigger  Analog sensor
output etc  Simulation environment
 Channel duplication function signals
 Built-in accurate frequency counter  Circuit function test
enables to measure ranges 100mHz-  IC test
200MHz (single channel)  Researching and training
 Standard interfaces: USB Device, USB
Host, Optional interface: GPIB
 Supplied with powerful arbitrary editing Edit arbitrary waveform
software Enables edition of 14-bit 16kpts
 Remote control support arbitrary output waveforms, Arbitrary
editing software EasyWave provides 9
standard waveforms: Sine, Square,
Ramp, Pulse, ExRise, ExpFall, Sinc,
Noise and DC, which meets all
Reasonable price & Outstanding engineers’ basic needs; In addition, it
provides plenty of ways of manual
performance drawing, point-to-point line drawing and
SDG1000 series Function/Arbitrary arbitrary point drawing. It facilitates to
Waveform Generator is a new family member create complex waveforms; Multi-file
of SIGLENT with friendly design: 3.5 inch screen management helps users to edit
TFT-LCD display; Built-in Chinese/English multiple-waveform simultaneously. It
language; Online help function; Support USB provides 10 Storage in non-volatile
and internal storage, facilitate files RAM. You can edit and store more
management; Special connection terminal for waveforms by EasyWave.
grounding.
1
 SDG1000 Series DataSheet

Arbitrary waveform output

Built-in 46 arbitrary waveforms (include DC), including math, engineering and other
commonly-used waveforms.

Complete set of modulation functions, sweep output,

burst output
 Complete set of modulation functions: AM, DSB-AM, FM, PM, FSK, ASK, PWM, the
modulation waveform can be observed directly, which it is suitable for education and
training;
 Sweep output: change output frequency from starting frequency to ending one within
sweeping time, Sweeping time range: 1ms~500s. The carrier can be Sine, Square,
Triangle and Arbitrary waveforms.
 Burst output: It can periodically generate pulse sequence. Internal counter and
external control signal are available to control burst output.

Dual-channel Built-in frequency counter

Duplicating function Wide frequency range: 100mHz~200MHz.

 Channel duplicating: allows to Measurable parameters: frequency,
duplicate parameters from one period, duty-cycle, positive pulse width,
channel to the other. negative pulse width
Setting: it can set DC/AC coupling, trigger
level and high frequency rejection.

2
SDG1000 Series DataSheet

Specification
Model SDG1010 SDG1025 SDG1050
Max. output 10MHz 25MHz 50MHz
frequency
Output channels 2
Sample rate 125MSa/s
Arbitrary waveform
16kpts
length
Frequency resolution 1μHz
vertical resolution 14bits
Sine, Square, Ramp, Pulse, Gaussian Noise. 46 built-in arbitrary
Waveform
waveforms (include DC)
Modulation AM, DSB-AM, FM, PM, FSK, ASK, PWM, Sweep, Burst
Frequency counter Frequency range:100mHz~200MHz
Standard interface USB Host & Device
Dimension W x H x D=229mm x 105mm x 281mm

Attention:
All these specifications apply to the SDG1000 Series Function/Arbitrary Waveform
Generator unless otherwise explanation. To satisfy these specifications, the
following conditions must be met first:

1. The instrument has been operating continuously for more than 30 minutes within
specified operating temperature range (18ºC~28°C).
2. The temperature variation does not exceed 5℃.

Note: all specifications are guaranteed unless where noted ‘typical’.

3
 SDG1000 Series DataSheet

Frequency Specification
SDG1010 SDG1025 SDG1050
Waveform Sine, Square, Ramp, Pulse, Noise, Arbitrary
Sine 1μHz ~ 10MHz 1μHz ~ 25MHz 1μHz ~ 50MHz
Square 1μHz ~ 10MHz 1μHz ~ 25MHz 1μHz ~ 25MHz
Pulse 500μHz ~ 5MHz 500μHz ~ 5MHz 500μHz ~ 5MHz
Ramp/Triangula 1μHz ~ 300kHz 1μHz ~ 300kHz 1μHz ~ 300kHz
r
Gaussian white >10MHz (-3dB) >25MHz (-3dB) 50MHz (-3dB)
noise
Arbitrary 1μHz ~ 5MHz 1μHz ~ 5MHz 1μHz ~ 5MHz
Resolution 1μHz
Accuracy Within 90days: ±50ppm; within 1 year: ±100ppm 18°C~28°C
Temperature
<5ppm/°C
coefficient

Sine Spectrum Purity

Harmonic Distortion CH1/CH2
DC~1MHz -60dBc
1MHz~5MHz -53dBc
5MHz~25MHz -35dBc
25MHz~50MHz -32dBc
Total harmonic waveform DC~20kHz,1Vpp<0.2%
distortion
DC~1MHz<-70dBc
Spurious signal(non-harmonic)
1MHz~10MHz<-70dBc+6dB/octave
Phase noise 10kHz Offset,–108dBc/Hz (typical value)

Square
Rise/fall time <12ns (10% ~ 90%)
Overshoot <5% (typical,1kHz,1Vpp)
1μHz ~10MHz 20%~80%
Duty
10MHz~20MHz 40%~60%
Cycle
20MHz~25MHz 50%
Asymmetric(50% Duty Cycle) 1% of period+20ns (typical,1kHz,1Vpp)
Jitter 0.1% of period (typical,1kHz,1Vpp)

4
SDG1000 Series DataSheet
Ramp/Triangle
Linearity <0.1% of Peak value output
(typical,1kHz,1Vpp,100% symmetric)
Symmetry 0%~100%

Pulse
Pulse width 1998s, Max. 16ns, Min. 1ns resolution
Rise/Fall time (10% ~ 7ns
90%,typical,1 kHz,1Vpp)
Duty Cycle 0.1% Resolution
Overshoot <5%
Jitter (pk-pk) 8ns

Arbitrary
Waveform length 16k points
Vertical resolution 14bits
Sample rate 125MSa/s
Min. Rise/Fall time 7ns (typical)
Jitter(pk-pk) 8ns (typical)
Storage in non-volatile RAM
10 waveforms
memory (10 in total)

Output Specification
Output CH1 CH2
2mVpp~10Vpp (50Ω, ≤10MHz)
2mVpp~5Vpp (50Ω, >10MHz) 2mVpp~3Vpp (50Ω)
Amplitude
4mVpp~20Vpp (HiZ, ≤10MHz) 4mVpp~6Vpp (HiZ)
4mVpp~10Vpp (HiZ, >10MHz)
Vertical accuracy ±(0.3dB+1mVpp of ±(0.3dB+1mVpp of
(100 kHz sine) setting value) setting value)
Amplitude flatness
(compared to 100 ±0.3 dB
kHz sine,5Vpp)
Channel phase
＜400ps (classic value,sine,50MHz,4vpp)
deviation
Cross talk <-70dBc

5
 SDG1000 Series DataSheet

DC Offset
±5V (50Ω) ±1.5V (50Ω)
Range(DC)
±10V (high impedance) ±3V (high impedance)
±(|setting offset ±(|setting offset
Offset accuracy
value|*1%+3mV) value|*1%+3mV)

Waveform Output
Impedance 50Ω (typical) 50Ω (typical)

AM Modulation(CH1/CH2)
Carrier Sine, Square, Ramp, Arbitrary (except DC)
Source Internal/External
Modulation Sine, Square, Ramp, Noise, Arbitrary (2mHz ~ 20kHz)
waveform
Modulation depth 0% ~ 120%
FM Modulation(CH1/CH2)
Carrier Sine, Square, Ramp, Arbitrary (except DC)
Source Internal/External
Modulation Sine, Square, Ramp, Noise, Arbitrary (2mHz~20kHz)
waveform
Frequency deviation 0 ~0.5*bandwidth 1mHz resolution
PM Modulation(CH1/CH2)
Carrier Sine, Square, Ramp, Arbitrary (except DC)
Source Internal/External
Modulation
Sine, Square, Ramp, Noise, Arbitrary (2mHz~20kHz)
waveform
Phase Deviation 0~360°,0.1°Resolution
FSK Modulation(CH1/CH2)
Carrier Sine, Square, Ramp, Arbitrary (except DC)
Source Internal/External
Modulation
50% duty-cycle square waveform (2mHz~50kHz)
waveform
ASK Modulation(CH1/CH2)
Carrier Sine, Square, Ramp, Arbitrary (except DC)
Source Internal/External
Modulation
50%duty-cycle square waveform (2mHz~50kHz)
waveform
PWM Modulation(CH1/CH2)
Frequency 500μHz~20kHz

6
SDG1000 Series DataSheet
Source Internal/External
Modulation
Sine, Square, Ramp, Arbitrary (except DC)
waveform
External Modulation
-6V~+6V (maximum width deviation)
range
Sweep(CH1/CH2)
Carrier Sine, Square, Ramp, Arbitrary (except DC)
Type linear/logarithmic
Direct Up/down
Sweep time 1ms~500s
Trigger source Manual, external, internal
Burst(CH1/CH2)
Waveform Sine, Square, Ramp, Pulse, Arbitrary (except DC)
Type Count (1~50,000 periods), infinite, Gated
Start/Stop phrase 0°~+360°
Internal period 1μs~500s
Gated source External trigger
Trigger source Manual, External or Internal

Rear Panel Connector

External modulation ±6V=100% modulation >5kΩ input impedance

External trigger TTL compatible

Note: The external input voltage can’t be over ±6V, otherwise instrument gets damaged.

Trigger Input
Input Level TTL compatible
Slope Up or down (optional)
Pulse width >100ns
Input impedance >5kΩ, DC coupling

Trigger Output
Voltage level TTL compatible
Pulse width >400ns
Output impedance 50Ω (typical)
Max. frequency 1MHz

7
 SDG1000 Series DataSheet

Reference Frequency Input

Voltage level 5 Vpp ~ 5.5 Vpp
Frequency range 10MHz±1kHz
Input impedance >5kΩ,AC coupling

SYNC Output
Voltage level TTL compatible
Pulse width >50ns
Output impedance 50Ω (typical)
Max. frequency 2MHz

Frequency Counter
Measurement Frequency, Period, Positive/negative pulse width, duty cycle
Frequency range Single Channel:100mHz~200MHz
Frequency 6bits/s
resolution
Voltage range (non-modulated signal)
DC offset range ±1.5VDC
DC
100mHz~100MHz 50mVrms~±2.5V
coupling
Manual 100MHz~200MHz 100mVrms~±2.5V
AC 1Hz~100MHz 50mVrms~5Vpp
coupling 100MHz~200MHz 100mVrms~5Vpp
Pulse width and
duty-cycle 1Hz~10MHz (50mVrms~5Vpp)
measurement
Input impedance 1MΩ
Input adjustment Coupling mode AC,DC
High-frequency rejection ON/OFF

Trigger level range -3V~ +1.8V

8
SDG1000 Series DataSheet

General Specification
Display

Display type 3.5 inch TFT-LCD

Resolution 320×RGB×240
Color depth 24bit
Contrast Ratio 350:1 (typical)
Luminance 300cd/m2 (typical)
Power
100~240 VACRMS, 50/60Hz
Voltage
100~120 VACRMS, 440Hz
Consumption 50W Max
Fuse 1.25A, 250V
Environment
Operation:0°C~40°C
Temperature
Storage:-20°C~60°C
Below +35℃:≤90% relative humidity
Humidity range
+35℃~+40℃:≤60% relative humidity
Operation: below 3,000 meters
Altitude
Storage: below 15,000 meters
2004/108/EC Directive
Electromagnetic Applicable standards EN 61326-1:2006
Compatibility EN 61000-3-2:2006 + A2:2009
EN 61000-3-3:2008
2006/95/EC Low Voltage Directive
EN 61010-1:2010/EN 61010-031:2002+A1:2008
Safety
UL 61010-1:2012,CAN/CSA-C22.2 No.61010-1:2012
UL 61010-2-030:2012,CAN/CSA-C22.2 No.61010-2-030:2012
Others
Width:229mm
Dimension Height:105mm
Depth:281mm
N.W: 2.6Kg
Weight
G.W: 3.4Kg
IP protection
IP20
Calibration Cycle
1year

9
 SDG1000 Series DataSheet

Ordering Information
Product Name
SDG1000 Series Function/Arbitrary Waveform Generator
Models:
SDG1050 50MHz

SDG1025 25MHz

SDG1010 10MHz

Standard Accessories
● A Quick Start
● A Calibration Certificate
● A Power Cord that fits the standard of destination country
● A USB Cable
Optional Accessories
● BNC cable
● GPIB-USB Adapter

Contact SIGLENT
SIGLENT TECHNOLOYIES CO., LTD
Address: 3/F, No.4 BULIDING, 3rd LIUXIAN Rd, ANTONGDA INDUSTRY GARDEN,
BAO’AN DISTRICT, SHENZHEN, CHINA

Tel: +86-755-36615186
Fax: +86-755-33591582
Post Code: 518101
E-mail:[email protected]
http://www.siglent.com

10