Tool News

New Product Information

New Tools Available – February 2020

Truck Body Lifting Pin Group

Model Usage: All Off-Highway Trucks European Union Compliant, CE marked • 477-0602 used on 794AC, 796AC, 798AC
Warranty: Caterpillar Six Months
®
• Used to remove and install truck bodies on • Pins available separately 376-4553 long
Off-Highway Trucks replacement pin 376-4555 short replacement
• Available as individual groups, each group pin, 468-5877 pin for AC trucks
consist of 8 pieces (4 pins and 4 shackles) Reference
• 376-4554 used on 785, 789, 793, 795, 797 • NEHS1120, Tool Operating Manual
• 376-4556 used on 770 (formerly the 769), 772 • NEHS1212, Tool Operating Manual
(formerly the 771), 773, 775, 777
Part No. Description Working Load Limit Dimensions TOM
376-4554 18,000 kg (39,683.2 lb) 510.9 x 127 mm (20.1 x 5 in) NEHS1120
Truck Body
376-4556 7,000 kg (15,432 lb) 314.9 x127 mm (12.4 x 5 in) NEHS1120
Lifting Pin
477-0602 27,215 kg (60,000 lb) 511 x 152 mm (20.1 x 6 in) NEHS1212

Spanner Socket
Model Usage: MT4400D AC, 793F-AC, 794AC, • Socket is used to service the 465-8103 • Spanner lock nuts with 80 mm outside
795F-XQ, 795F-AC, 798AC OHT bearing assembly used in blower fans of diameter
Warranty: Caterpillar Six Months
® electric drive OHT.
Part No. Description Dimensions Weight
Outside Dia: 88.9 mm (3.5 in)
581-9578 Spanner Socket Shaft Extension Length: 63.5 mm (2.5 in) 0.25 kg (0.5 lb)
Drive Square: 19.05 mm (0.75 in)

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
Crank Seal Tooling
Model Usage: All C9-13L Engines • Used to install C9 or C13 rear crankshaft seal • The movement of the seal is slower, allowing
Warranty: Caterpillar Six Months
® that will allow for a correct centering of the pinch points of the seal to be avoided.
seal without potential for seal damage caused • The installation quality of the seal and the
during installation service life of the seal is increased with this
• Much less force is required to install the seal. tool.
Item Part No. Description Quantity Dimensions Weight
TOOL GP (C9/C13 SEAL Dia 222 x 163.5 mm
- 563-9214 - 4.2 kg (9.3 lb)
INSTALLER) (Dia 8.7 x 6.4 in)
563-9214 Group Consists of:
Dia 156.5 x 147.5 mm
1 563-6215 PILOT AS (C9) 1 0.85 kg (1.9 lb)
(Dia 6.2 x 5.8 in)
Dia 222 x 93.4 mm
2 563-9216 COVER AS (C9/C13) 1 2.1 kg (4.6 lb)
(Dia 8.7 x 3.7 in)
SLEEVE-WEAR Dia 162.5 x 56 mm
3 - 1 0.8 kg (1.8 lb)
(INSTALLER) (Dia 6.4 x 2.2 in)
4 - SCREW (M16x2) 3 M16x2 x 36 mm long 0.05 kg (0.11 lb)
STUD-ALIGNMENT Dia 7.55 x 44.45 mm
5 - 3 0.02 kg (0.05 lb)
(M6x1) (Dia 0.3 x 1.75 in)
Dia 160 x 4.8 mm
6 - PLATE-SPACER 1 0.23 kg (0.5 lb)
(Dia 6.3 x 0.2 in)
Dia 38.1 x 3.2 mm
7 - BEARING-THRUST 1 0.006 kg (0.01 lb)
(Dia 1.5 x 0.13 in)
8 6V-3940 BOLT-HEX HEAD 3 M8x1.25 30.5 mm Long -
9 8T-4131 NUT-HEX 1 M20x2.5 x 18 mm Long -
10 9M-1974 WASHER-HARD 3 Dia 16 x 2 mm -

Item Part No. Part Name Quantity Dimensions Weight

563-9223 PIN GP - - -
563-9223 Group Consists of:
Dia 7.6 x 29 mm
1 - PIN-DOWEL 3 0.006 kg
(Dia 0.3 x 1.2)
Dia 7.55 x 44.45 mm
2 - STUD-ALIGNMENT (M6x1) 3 0.02 kg (0.05 lb)
(Dia 0.3 x 1.75 in)
Dia 38.1 x 3.2 mm
3 - BEARING-THRUST 1 0.006 kg (0.02 lb)
(Dia 1.5 x 0.13 in)

Item Part No. Part Name Quantity Dimensions Weight

563-9224 FASTENER GP - - -
563-9224 Group Consists of:
1 - SCREW (M16x2) 3 M16x2 x 36 mm long 0.05 kg (0.11 lb)
Dia 160 x 4.8 mm
2 - PLATE-SPACER 1 0.23 kg (0.5 lb)
(Dia 6.3 x 0.2 in)
3 6V-3940 BOLT-HEX HEAD 3 M8x1.25 30.5 mm long -
4 9M-1974 WASHER-HARD 3 Dia 16 x 2 mm -

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
Cat® Fractional Flank Drive Deep Impact Socket Set, 7-Piece, 3/8” Drive
Warranty: See Individual Parts • 12 point • Manufactured from special alloy steel and
• 3/8” square drive heat treated for optimum strength and
durability
• Set includes socket bar and clips.
• Flank Drive® wrenching system provides 15-
• Can be ordered by set or individually 20% more turning power with less risk of tool
• Made in USA or fastener damage.
• Industrial finish helps protect against
corrosion.
575-2377 Impact Socket Set Includes:
Part No. Length Size
575-2382 2 1/8” (54 mm) 3/8”
575-2379 2 1/8” (54 mm) 7/16”
575-2384 2 1/8” (54 mm) 1/2”
575-2378 2 1/8” (54 mm) 9/16”
575-2380 2 3/8” (60 mm) 5/8”
575-2383 2 5/8” (67 mm) 11/16”
575-2381 2 5/8” (67 mm) 3/4”

Cat® Fractional Flank Drive Shallow Impact Socket Set, 13-Piece, ½” Drive
Warranty: See Individual Parts • 12 point • Manufactured from special alloy steel and
• 1/2” square drive heat treated for optimum strength and
durability
• Set includes socket bar and clips
• Industrial finish helps protect against
• Can be ordered by set or individually corrosion.
• Made in USA • Flank Drive® wrenching system provides 15-
20% more turning power with less risk of tool
or fastener damage.
575-2385 Impact Socket Set Includes:
Part No. Length Size
575-2386 1 ½” (38 mm) 3/8”
575-2387 1 ½” (38 mm) 7/16"
575-2388 1 ½” (38 mm) 1/2"
575-2389 1 ½” (38 mm) 9/16"
575-2390 1 ½” (38 mm) 5/8"
575-2391 1 ½” (38 mm) 11/16"
575-2392 1 ½” (38 mm) 3/4"
575-2393 1 ½” (38 mm) 13/16"
575-2394 1 ½” (38 mm) 7/8"
575-2395 1 ¾” (44 mm) 15/16"
575-2396 1 ¾” (44 mm) 1"
575-2397 2” (51 mm) 1 -1/8"
575-2398 2” (51 mm) 1- 1/4"

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
Cat® Fractional Flank Drive Deep Impact Socket Set, 13-Piece, ½” Drive
Warranty: See Individual Parts • 12 point • Manufactured from special alloy steel and
• 1/2” square drive heat treated for optimum strength and
durability
• Set includes socket bar and clips
• Industrial finish helps protect against
• Can be ordered by set or individually corrosion.
• Made in USA • Flank Drive® wrenching system provides 15-
20% more turning power with less risk of tool
or fastener damage.
575-2399 Impact Socket Set Includes:
Part No. Length Size
575-2400 3 ¼” (83 mm) 1/2”
575-2401 3 ¼” (83 mm) 9/16"
575-2402 3 ¼” (83 mm) 5/8"
575-2403 3 ¼” (83 mm) 11/16”
575-2404 3 ¼” (83 mm) 3/4”
575-2405 3 ¼” (83 mm) 13/16”
575-2406 3 ½” (89 mm) 7/8”
575-2407 3 ½” (89 mm 15/16”
575-2408 3 ½” (89 mm 1”
575-2409 3 ½” (89 mm 1 1/16”
575-2410 3 ½” (89 mm 1 1/8”
575-2411 3 ½” (89 mm 1 -3/16”
575-2412 3 ½” (89 mm 1- 1/4"

Cat® Metric Flank Drive Shallow Impact Socket Set, 15-Piece, ½” Drive
Warranty: See Individual Parts • 12 point • Manufactured from special alloy steel and
• 1/2” square drive heat treated for optimum strength and
durability
• Set includes socket bar and clips
• Industrial finish helps protect against
• Can be ordered by set or individually corrosion.
• Made in USA • Flank Drive® wrenching system provides 15-
20% more turning power with less risk of tool
or fastener damage.
575-2413 Impact Socket Set Includes:
Part No. Length Size
575-2414 1.5” (38 mm) 10 mm
575-2415 1.5” (38 mm) 11 mm
575-2416 1.5” (38 mm) 12 mm
575-2417 1.5” (38 mm) 13 mm
575-2418 1.5” (38 mm) 14 mm
575-2419 1.5” (38 mm) 15 mm
575-2420 1.5” (38 mm) 16 mm
575-2421 1.5” (38 mm) 17 mm
575-2422 1.5” (38 mm) 18 mm
575-2423 1.5” (38 mm) 19 mm
575-2424 1.5” (38 mm) 20 mm
575-2425 1.5” (38 mm) 21 mm
575-2426 1.5” (38 mm) 22 mm
575-2427 1.75” (45 mm) 23 mm
575-2428 1.75” (45 mm) 24 mm

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
Cat® Metric Flank Drive Deep Impact Socket Set, 12-Piece, ½” Drive
Warranty: See Individual Parts • 12 point • Manufactured from special alloy steel and
• 1/2” square drive heat treated for optimum strength and
durability
• Set includes socket bar and clips
• Industrial finish helps protect against
• Can be ordered by set or individually corrosion.
• Made in USA • Flank Drive® wrenching system provides 15-
20% more turning power with less risk of tool
or fastener damage.
575-2432 Impact Socket Set Includes:
Part No. Length Size
575-2432 3 ¼” (83 mm) 15 mm
575-2433 3 ¼” (83 mm 16 mm
575-2434 3 ¼” (83 mm 17 mm
575-2435 3 ¼” (83 mm 18 mm
575-2436 3 ¼” (83 mm 19 mm
575-2437 3 ¼” (83 mm 20 mm
575-2438 3 ¼” (83 mm 21 mm
575-2439 3 ½” (89 mm) 22 mm
575-2440 3 ½” (89 mm) 23 mm
575-2441 3 ½” (89 mm) 24 mm
575-2442 3 ½” (89 mm) 25 mm
575-2443 3 ½” (89 mm) 27 mm

PIG® Burpless Steel Drum Funnel

Warranty: Date of Purchase • Fits 20 to 55 gal. plastic or steel drums with • Pour without venting through the 3/4” bung,
2” NPT eliminating risk of an open container violation.
• Exclusive latching handle design can be • Nitrile gasket and locking mechanism
opened and closed in a simple, single-handed completely seal lid to help reduce vapor
operation. emissions.
• Lid offers a secure closure for compliance • Can be padlocked to prevent unauthorized
with closed container regulations. access
• Patented Burpless design vents during pouring • Durable, black chemical-resistant powder coat
for fast, smooth flow with no dangerous helps ensure long service life.
splash back. • Made as ordered
Part No. Description Length Weight
589-8528 PIG® Burpless Steel Drum Funnel 28.6 x 38.1 x 33 cm (11.25 x 15 x 13 in) 6.4 kg (14 lb)

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
Marine Sea Trial Group for Multitool Plus
Model Usage: Marine Sea Trial • 24 Multitool adapters, cables, sensors and • Contains adapter fittings and o-rings
Warranty: Caterpillar One Year
® fitting group to take temperature and pressure • Reduce setup time—everything required is in
readings during marine sea trial one place
• Record 24 channels of data using optional • Adapters and fittings in labeled box make
Multitool Plus (515-8465) and two expansion it easy to identify missing fittings and parts
modules (518-1559) available in the Cat® Parts System.
• Uses 1/8” probe RTD temperature sensors • Multitool Plus (515-8465) can record
• Uses 500 psi sensors with quick couplers additional 16 Datalink Channels using Comm
• Extension cables keep technician away from Adapter 3 and cable (538-5051.)
engine. • This tool replaces 464-1090.
Part No. Description Dimensions Weight
Group shown without Cables 590.6 x 527.1 x 228.6 mm
583-1971 Marine Sea Trial Group for Multitool Plus 19 kg (42 lb)
(23.3 x 20.8 x 9 in)

583-1971 Group Includes:

Description Part No. Quantity
Pelican Carrying Case 4C-9660 1
5 Pin Din Extension Cable 6V-2198 24
500 psi Pressure Sensor 376-4170 12
RTD Sensor 1.5 in probe 4C-6265 2
RTD Sensor 2.5 in probe 4C-6266 8
RTD Exhaust Sensor 4C-6268 2
Foam Insert 464-1093 1
Decal for Carrying Case 582-1529 1
Velcro Cable Tie 9U-5061 24
M0106327 Multi Tool Plus M0106329
Tool Operating Manual 1
Marine Sea Trial Group
Adapter Group 464-1091 1
Adapter Sensor 515-8470 12
Adapter RTD 515-8471 12
Decal Group 515-8475 1
Multitool Plus Adapters Temperature Screwdriver 4C-4029 1
(515-8471) & Pressure (515-8470)

Standard Connection to measure

temperature & pressure on a port.

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
Extraction Tool for Metri-Pack 150 & 280
Model Usage: Medium Wheel Loaders • Used to service Delphi (Delco) 150 & 280 • Used to remove wire and terminal from rear
Warranty: Caterpillar One Year
® connectors (such as PN 100-3320) of connector
Part No. Description Dimensions Weight
589-5177 Extraction Tool for Metri-Pack 150 & 280 101.6 x 12.7 mm (4 x 0.5 in) 23 grams (0.81 oz)

Stub Harness
Model Usage: 966M XE • Used with Transmission Analyzer 3 • Requires 306-0397 extension harness
Warranty: Caterpillar One Year
®
Part No. Description Dimensions Weight
573-4601 Stub Harness 550 x 550 x 400 mm (21.65 x 21.65 x 15.75 in) 2 kg (4.1 lb)

Breakout Test Group

Model Usage: A6-E11/10 and A6-E10 ECMs • Allows engine wiring harness to be continuity • Contains 3 pieces (each) of the following
Warranty: Caterpillar One Year
® tested probes:
• Contains all three probes needed to – 398-5063 Red Male Terminal Spade 0.991 x
troubleshoot wiring harnesses on the C3.6 0.635 mm (0.025 x 0.039 in)
engine – 398-4985 Yellow Male Spade 0.635 x 3.048
mm (0.025 x 0.120 in)
– 585-5073 Black Male Probe 0.4 mm
diameter (1/64 in)
Part No. Description Dimensions Weight
585-5072 Breakout Test Group 550 x 550 x 400 mm (21.65 x 21.65 x 15.75 in) 2 kg (4.1 lb)

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
DEF Nozzle Optional Handle and O-Ring Seal
Warranty: Caterpillar Six Months
®
• Optional and serviceable parts for the 584-
9979 DEF nozzle
Part No. Description Weight
587-3371 Rear Cap 0.05 kg (0.2 lb)
587-3371 587-3372 HANDLE- Standard Handle for Hose Barb Fitting 0.1 kg (0.3 lb)
587-3373 ¾ inch Hose Barb Fitting For Standard Handle 0.05 kg (0.2 lb)
587-3374 O-Ring Seal 0.01 kg (0.02 lb)
587-3375 HANDLE-Optional 1 inch Female NPT Thread 0.1 kg (0.3 lb)

587-3372

587-3373

587-3374

587-3375

Extractor (PTO Shaft)

Model Usage: C2.8L and C3.6L Engines • Used to remove the power take off shaft on • Threaded rod of slide hammer is installed into
Warranty: Caterpillar Six Months
® C2.8L and C3.6L engines the extractor, expanding extractor inside of
• Used with 9S-3095 slide hammer assembly the PTO shaft allowing easy removal.

Part No. Description Dimensions Weight

585-0009 Extractor (PTO Shaft) Dia 32 x 80 mm (Dia 1.3 x 3 in) 0.24 kg (0.5 lb)

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
Torque Wrench Assembly (55 mm Adapter)
Model Usage: C13 • Used to tighten fan tensioner nut on C13s • 55 mm width between flats on wrench
Warranty: Caterpillar Six Months
® Gen Set and Industrial Engines equipped with • Used with interchangeable torque wrench
527-6952 fan tensioner groups
Part No. Description Dimensions Weight
575-2301 Torque Wrench Assembly (55 mm Adapter) 55 mm (2.16 in) 1.4 kg (3 lb)

Piston Seal Installer and Sizing Tools for HEX

Model Usage: 336 and 349 HEX • Installs piston seal onto piston and sizes seal • The re-sizing tool compresses the piston seal
Warranty: Caterpillar Six Months
® after installation back to its natural state after installation.
• Seal Installer is used to make installation The re-sizer fits over the piston and piston
of the seal onto the piston easier without seal and keeps seal compressed, allowing
damaging the seal. Seal is slid over the tool seal to return to its natural state without
589-7472 deformation.
and expanded to fit over piston and into seal
groove.
Part No. Cylinder Tube ID mm (Reference) Description Weight
589-7472 170 4.9 kg (10.8 lb)
589-7473 589-7473 150 4.2 kg (9.3 lb)
589-7474 160 4.6 kg (10 lb)
Seal Installer
589-7475 170 10 kg (22.4 lb)
589-7476 150 9.3 kg (20.5 lb)
589-7477 160 9.7 kg (21.4 lb)
589-7474

589-7475

589-7476

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

To Subscribe or Unsubscribe to publications like this one, visit the Tool News Page.

Global Dealer Solution Network

Parts Technical
North America 877-228-2420
International 309-266-4421
https://dealer.cat.com/gdsn

PEDP9135-44 February 2020

© 2020 Caterpillar • All Rights Reserved
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as
corporate end product identity used herein, are trademarks of Caterpillar and may not be used without permission.