Direct Acting, Normally Closed 2/2

4 General Service Solenoid Valves SERIES

2-WAY
Brass or Stainless Steel Bodies 8262
1/8" to 3/8" NPT 8263
Features
• Welded core tube provides higher pressure ratings % ^ # )
• Reliable, proven design with high flows
• Small poppet valves for tight shutoff
• Lead-free versions available for Safe Drinking
Water Act Compliance
• Wide range of elastomers for specialty service applications
• Mountable in any position
• Tapped mounting holes in body standard

Construction
Valve Parts in Contact with Fluids
Body Brass Cast 304 Stainless Steel
Seals and Discs NBR or Cast UR
Core Tube 305 Stainless Steel
Core and Plugnut 430F Stainless Steel
Springs 302 Stainless Steel
Shading Coil Copper Silver
NC
Electrical
Watt Rating & Power Consumption Spare Coil Part No.
AC General Purpose Explosionproof
DC VA
Watts Watts Holding VA Inrush AC DC AC DC
10.6 6.1* 16 30 238210 238510 238214 238514
18.6 9.1* 20 45 238210 238510 238214 238514
11.6 10.1 25 50 238610 238910 238614 238914
22.6 17.1 40 70 238610 238910 238614 238914
Standard Voltages: 24, 120, 240, 480 volts AC, 60 Hz (or 110, 220 volts AC, 50 Hz).
6, 12, 24, 120, 240 volts DC. Must be specified when ordering.
Other voltages available when required.
*On 50 hertz service, the rating for the 6.1/F solenoid is 8.1 watts, and
the rating for the 9.1/F solenoid is 11.1 watts.

Solenoid Enclosures
Standard: Watertight, Types 1, 2, 3, 3S, 4, and 4X.
Optional: Explosionproof and Watertight, Types 3, 3S, 4, 4X, 6, 6P, 7, and 9. Nominal Ambient Temp. Ranges
The nominal limitation of 32°F (0°C) is advisable for any
(To order, add prefix “EF” to catalog number)
valve that might contain moisture (water vapor).
See Optional Features Section for other available options. AC: -13˚F to 131˚F (-25˚C to 55˚C)
Options DC: -13˚F to 104˚F (-25˚C to 40˚C)
-13˚F to 131˚F (-25˚C to 55˚C)
Mounting bracket (suffix MB)
Note: Max ambient for explosionproof (EF) is 125˚F
Quarter-turn manual operator with screw slot (suffix MS)
(52˚C) for AC, 131˚F (55˚C) for DC.
Panel mount (prefix GP for conduit; consult ASCO for other electrical connections)
Vacuum service (suffix VH; see Vacuum Section for more details.) Optional: For AC, the max. ambient temperature is
140˚F (60˚C) with Class H coil (with or without prefix EF)
Oxygen service (suffix N)
Silicone Free (suffix SF) Refer to Engineering Section for details.
Elastomers: FKM (suffix V), Ethylene Propylene (suffix E), CR (suffix J), Approvals
PTFE* (suffix T), Low Temp NBR** (suffix A) CSA certified. UL listed, as indicated. Safety Shutoff
Note: *PTFE reduces pressure rating by 25% (i.e. 750 psi reduced to 560 psi)
Valves FM approved. Meets applicable CE directives.
Refer to Engineering Section for details.
** For Low Temp. NBR, fluid temperature range is -40˚F to 167˚F (only for valves with
10.1, 17.1, 11.6, and 22.6 watt coils). ATEX/IECEx certified with prefix “EV” as listed. Refer
to Optional Features Electrical Section for details.
Refer to Engineering Section for fluid and temperature compatibility. 37
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
 2/2
4
SERIES
2-WAY

8262
8263
Specifications (English units)
Operating Pressure Differential (psi) Catalog Number Watt Rating/
Max. Fluid Class of Coil
Max. AC@131°F Max. DC@104°F Max. DC@131°F Temp. °F Insulation
Pipe Orifice Cv
Size size Flow Air-Inert Lt. Oil @ Air-Inert Lt. Oil @ Air-Inert Lt. Oil Stainless Const. UL
(in) (in) Factor Gas Water 300ssu Gas Water 300ssu Gas Water 300ssu AC DC Brass Steel Ref. Listing AC DC
NORMALLY CLOSED (Closed when de-energized), NBR Disc
1/8 3/64 0.06 2200 2200 1700 - - - - - - 140 - - 8262H175 ¨ 1 l 10.1/F -
1/8 3/64 0.06 - - - 2000 2000 1725 1900 1900 1700 - 140 - 8262H176 ¨ 1 l - 22.6/H
1/8 3/64 0.06 - - - 1500 1500 1500 1500 1500 1500 - 140 8262H089 ¨ - 1 l - 22.6/H
1/8 3/64 0.06 2025 1710 825 965 745 720 920 700 675 140 140 - 8262H079 ¨ 2 l 9.1/F 18.6/H
1/8 3/64 0.06 1500 1350 825 750 620 565 700 565 530 140 140 8262H096 ¨ - 2 l 6.1/F 10.6/H
1/8 3/64 0.06 1500 1350 825 - - - - - - 140 - - 8262H173 ¨ 2 l 6.1/F -
1/8 3/64 0.06 1500 1500 1500 1170 1145 945 1000 965 855 140 140 8262H099 ¨ - 1 l 10.1/F 11.6/H
1/8 3/64 0.06 750 750 725 750 640 550 750 600 500 180 180 8262H001 8262H012 2 m 6.1/F 10.6/H
1/8 3/32 0.21 720 410 410 610 410 410 600 410 400 180 180 8262H277 8262H178 1 m 17.1/F 22.6/H
1/8 3/32 0.21 - - - 290 290 270 240 240 255 180 180 - 8262H177 ¡ 1 m - 11.6/H
1/8 3/32 0.21 500 350 325 295 210 205 285 200 195 180 180 8262H011 - 2 m 9.1/F 18.6/H
1/8 3/32 0.21 370 330 190 235 160 160 215 150 145 180 180 8262H014 8262H015 2 m 6.1/F 10.6/H
1/8 1/8 0.35 500 380 355 275 275 235 250 250 225 180 180 8262H105 S 8262H174 1 m 17.1/F 22.6/H
1/8 1/8 0.35 340 300 215 - - - - - - - 180 - 8262H179 1 m 10.1/F -
1/8 1/8 0.35 275 260 195 165 130 130 155 120 120 180 180 8262H016 S - 2 m 9.1/F 18.6/H
1/8 1/8 0.35 185 180 120 130 110 95 120 100 90 180 180 8262H002 S 8262H006 2 m 6.1/F 10.6/H
1/4 3/64 0.06 2200 2200 1700 1170 1145 945 1000 965 855 140 140 - 8262H214 ¨ 3 l 10.1/F 11.6/H
1/4 3/64 0.06 1500 1500 1500 1170 1145 945 1000 965 855 140 140 8262H200 ¨ - 3 l 10.1/F 11.6/H
1/4 3/64 0.06 1500 1500 1500 1500 1500 1500 1500 1500 1500 140 140 8262H107 ¨ - 3 l 17.1/F 22.6/H
1/4 3/64 0.06 - - - 2000 2000 1725 1900 1900 1700 - 140 - 8262H181 ¨ 3 l - 22.6/H
1/4 3/64 0.06 1500 1350 825 750 620 530 700 565 495 140 140 8262H106 ¨ 8262H180 ¨ 4 l 6.1/F 10.6/H
1/4 3/64 0.06 750 750 725 750 640 550 750 600 500 180 180 8262H019 8262H080 4 m 6.1/F 10.6/H
1/4 3/32 0.21 720 410 410 610 410 410 600 410 400 180 180 8262H109 S 8262H183 ¡ 3 m 17.1/F 22.6/H
1/4 3/32 0.21 590 410 410 290 290 270 240 240 225 180 180 8262H108 S 8262H182 ¡ 3 m 10.1/F 11.6/H
1/4 3/32 0.21 500 350 270 295 210 205 285 200 195 180 180 8262H021 S - 4 m 9.1/F 18.6/H
1/4 3/32 0.21 370 330 160 235 160 160 215 150 145 180 180 8262H020 S 8262H086 4 m 6.1/F 10.6/H
1/4 1/8 0.35 500 380 355 275 275 235 250 250 225 180 180 8262H110 S 8262H185 ¡ 3 m 17.1/F 22.6/H
1/4 1/8 0.35 340 300 215 130 125 115 110 105 100 180 180 8262H232 S - 3 m 10.1/F 11.6/H
1/4 1/8 0.35 340 300 215 - - - - - - 180 - - 8262H184 ¡ 3 m 10.1/F -
1/4 1/8 0.35 275 260 150 165 130 120 155 120 115 180 180 8262H023 S - 4 m 9.1/F 18.6/H
1/4 1/8 0.35 185 180 90 130 110 90 120 100 85 180 180 8262H022 S 8262H007 4 m 6.1/F 10.6/H
1/4 5/32 0.52 300 210 210 135 135 135 115 115 115 180 180 8262H112 8262H187 ¡ 3 m 17.1/F 22.6/H
1/4 5/32 0.52 210 200 145 65 63 63 55 54 54 180 180 8262H202 - 3 m 10.1/F 11.6/H
1/4 5/32 0.52 210 200 145 - - - - - - 180 180 - 8262H220 ¡ 3 m 10.1/F -
1/4 5/32 0.52 150 140 100 95 75 75 85 72 70 180 180 8262H113 - 4 m 9.1/F 18.6/H
1/4 5/32 0.52 100 100 55 72 60 55 67 53 52 180 180 8262H111 8262H186 4 m 6.1/F 10.6/H
1/4 7/32 0.73 125 125 125 70 70 70 65 65 65 180 180 8262H114 S 8262H188 3 m 17.1/F 22.6/H
1/4 7/32 0.73 100 100 100 35 35 35 30 30 30 180 180 8262H208 S - 3 m 10.1/F 11.6/H
1/4 7/32 0.73 100 100 100 - - - - - - 180 - - 8262H226 3 m 10.1/F -
1/4 7/32 0.73 55 54 40 38 33 31 35 30 28 180 180 8262H013 S 8262H036 4 m 6.1/F 10.6/H
1/4 9/32 0.88 90 90 90 53 50 47 48 46 44 180 180 8262H212 8262H230 3 m 17.1/F 22.6/H
1/4 9/32 0.88 65 75 60 25 25 22 22 22 20 180 180 8262H210 - 3 m 10.1/F 11.6/H
1/4 9/32 0.88 65 75 60 - - - - - - 180 - - 8262H189 3 m 10.1/F -
1/4 9/32 0.88 36 36 33 27 23 21 24 22 20 180 180 8262H090 8262H038 4 m 6.1/F 10.6/H
3/8 1/8 0.35 500 380 355 275 275 160 250 250 150 180 180 8263H115 8263H191 5 m 17.1/F 22.6/H
3/8 1/8 0.35 340 300 215 130 125 85 110 105 75 180 180 8263H232 - 5 m 10.1/F 11.6/H
3/8 1/8 0.35 340 300 215 - - - - - - 180 - - 8263H190 5 m 10.1/F -
3/8 1/8 0.35 275 260 140 165 130 110 155 120 105 180 180 8263H003 - 6 m 9.1/F 18.6/H
3/8 1/8 0.35 185 180 90 130 110 80 120 100 75 180 180 8263H002 8263H330 6 m 6.1/F 10.6/H
3/8 5/32 0.52 300 210 195 135 135 100 115 115 90 180 180 8263H118 S 8263H193 5 m 17.1/F 22.6/H
3/8 5/32 0.52 210 185 100 65 63 50 55 54 44 180 180 8263H200 S - 5 m 10.1/F 11.6/H
3/8 5/32 0.52 210 185 100 - - - - - - 180 - - 8263H331 ¡ 5 m 10.1/F -
3/8 5/32 0.52 150 140 80 95 75 75 85 72 70 180 180 8263H117 S - 6 m 9.1/F 18.6/H
3/8 5/32 0.52 100 100 50 72 60 55 67 53 52 180 180 8263H116 S 8263H192 6 m 6.1/F 10.6/H
3/8 7/32 0.73 125 100 100 70 70 70 65 65 65 180 180 8263H206 ¡ 8263H332 5 m 17.1/F 22.6/H
3/8 7/32 0.73 100 86 70 35 35 35 30 30 30 180 180 8263H124 - 5 m 10.1/F 11.6/H
3/8 7/32 0.73 100 86 70 - - - - - - 180 - - 8263H195 5 m 10.1/F -
3/8 7/32 0.73 55 54 29 38 33 31 35 30 28 180 180 8263H119 8263H194 6 m 6.1/F 10.6/H
3/8 9/32 0.88 100 85 70 53 50 47 48 46 44 180 180 8263H210 8263H333 5 m 17.1/F 22.6/H
3/8 9/32 0.88 65 63 47 - - - - - - 180 180 8263H125 8263H197 5 m 10.1/F -
3/8 9/32 0.88 35 32 21 27 23 21 24 22 20 180 180 8263H054 8263H196 6 m 6.1/F 10.6/H
¨ Only available with UR disc, limits min. ambient temp. to 32˚F (0˚C). S Valve available with lead-free brass body using suffix “LF”.
38 ¡ ATEX/IECEx certified with prefix “EV”. The term “Lead-Free” for brass materials is defined by SDWA 1417 as having
Buy: www.ValinOnline.com | Phone 844-385-3099
l = General Purpose Valve, m = Safety Shutoff Valve | Email:
a maximum weighted average [email protected]
lead content of 0.25% on the wetted surface area.
 2/2
4
SERIES

2-WAY
8262
8263
Specifications (Metric units)
Operating Pressure Differential (bar) Catalog Number Watt Rating/
Max. Fluid Class of Coil
Kv Max. AC@55°C Max. DC@40°C Max. DC@55°C Temp. °C Insulation
Pipe Orifice Flow
Size size Factor Air-Inert Lt. Oil @ Air-Inert Lt. Oil @ Air-Inert Lt. Oil Stainless Const. UL
(in) (mm) (m3/h) Gas Water 300ssu Gas Water 300ssu Gas Water 300ssu AC DC Brass Steel Ref. Listing AC DC
NORMALLY CLOSED (Closed when de-energized), NBR Disc
1/8 1.2 0.05 152 152 117 - - - - - - 60 - - 8262H175 ¨ 1 l 10.1/F -
1/8 1.2 0.05 - - - 138 138 119 131 131 117 - 60 - 8262H176 ¨ 1 l - 22.6/H
1/8 1.2 0.05 - - - 103 103 103 103 103 103 - 60 8262H089 ¨ - 1 l - 22.6/H
1/8 1.2 0.05 140 118 57 67 51 50 63 48 47 60 60 - 8262H079 ¨ 2 l 9.1/F 18.6/H
1/8 1.2 0.05 103 93 57 52 43 39 48 39 37 60 60 8262H096 ¨ - 2 l 6.1/F 10.6/H
1/8 1.2 0.05 103 93 57 - - - - - - 60 - - 8262H173 ¨ 2 l 6.1/F -
1/8 1.2 0.05 103 103 103 81 79 65 69 67 59 60 60 8262H099 ¨ - 1 l 10.1/F 11.6/H
1/8 1.2 0.05 52 52 50 52 44 38 52 41 34 82 82 8262H001 8262H012 2 m 6.1/F 10.6/H
1/8 2.4 0.18 50 28 28 42 28 28 41 28 28 82 82 8262H277 8262H178 1 m 17.1/F 22.6/H
1/8 2.4 0.18 - - - 20 20 19 17 17 18 - 82 - 8262H177 ¡ 1 m - 11.6/H
1/8 2.4 0.18 34 24 22 20 14 14 20 14 13 82 82 8262H011 - 2 m 9.1/F 18.6/H
1/8 2.4 0.18 26 23 13 16 11 11 15 10 10 82 82 8262H014 8262H015 2 m 6.1/F 10.6/H
1/8 3.2 0.30 34 26 24 19 19 16 17 17 16 82 82 8262H105 S 8262H174 1 m 17.1/F 22.6/H
1/8 3.2 0.30 23 21 15 - - - - - - 82 - - 8262H179 1 m 10.1/F -
1/8 3.2 0.30 19 18 13 11 9 9 11 8 8 82 82 8262H016 S - 2 m 9.1/F 18.6/H
1/8 3.2 0.30 13 12 8 9 8 7 8 7 6 82 82 8262H002 S 8262H006 2 m 6.1/F 10.6/H
1/4 1.2 0.05 152 152 117 81 79 65 69 67 59 60 60 - 8262H214 ¨ 3 l 10.1/F 11.6/H
1/4 1.2 0.05 103 103 103 81 79 65 69 67 59 60 60 8262H200 ¨ - 3 l 10.1/F 11.6/H
1/4 1.2 0.05 103 103 103 103 103 103 103 103 103 60 60 8262H107 ¨ - 3 l 17.1/F 22.6/H
1/4 1.2 0.05 - - - 138 138 119 131 131 117 - 60 - 8262H181 ¨ 3 l - 22.6/H
1/4 1.2 0.05 103 93 57 52 43 37 48 39 34 60 60 8262H106 ¨ 8262H180 ¨ 4 l 6.1/F 10.6/H
1/4 1.2 0.05 52 52 50 52 44 38 52 41 34 82 82 8262H019 8262H080 4 m 6.1/F 10.6/H
1/4 2.4 0.18 50 28 28 42 28 28 41 28 28 82 82 8262H109 S 8262H183 ¡ 3 m 17.1/F 22.6/H
1/4 2.4 0.18 41 28 28 20 20 19 17 17 16 82 82 8262H108 S 8262H182 ¡ 3 m 10.1/F 11.6/H
1/4 2.4 0.18 34 24 19 20 14 14 20 14 13 82 82 8262H021 S - 4 m 9.1/F 18.6/H
1/4 2.4 0.18 26 23 11 16 11 11 15 10 10 82 82 8262H020 S 8262H086 4 m 6.1/F 10.6/H
1/4 3.2 0.30 34 26 24 19 19 16 17 17 16 82 82 8262H110 S 8262H185 ¡ 3 m 17.1/F 22.6/H
1/4 3.2 0.30 23 21 15 9 9 8 8 7 7 82 82 8262H232 S - 3 m 10.1/F 11.6/H
1/4 3.2 0.30 23 21 15 - - - - - - 82 - - 8262H184 ¡ 3 m 10.1/F -
1/4 3.2 0.30 19 18 10 11 9 8 11 8 8 82 82 8262H023 S - 4 m 9.1/F 18.6/H
1/4 3.2 0.30 13 12 6 9 8 6 8 7 6 82 82 8262H022 S 8262H007 4 m 6.1/F 10.6/H
1/4 4.0 0.45 21 14 14 9 9 9 8 8 8 82 82 8262H112 8262H187 ¡ 3 m 17.1/F 22.6/H
1/4 4.0 0.45 14 14 10 4 4 4 4 4 4 82 82 8262H202 - 3 m 10.1/F 11.6/H
1/4 4.0 0.45 14 14 10 - - - - - - 82 - - 8262H220 ¡ 3 m 10.1/F -
1/4 4.0 0.45 10 10 7 7 5 5 6 5 5 82 82 8262H113 - 4 m 9.1/F 18.6/H
1/4 4.0 0.45 7 7 4 5 4 4 5 4 4 82 82 8262H111 8262H186 4 m 6.1/F 10.6/H
1/4 5.6 0.63 9 9 9 5 5 5 4 4 4 82 82 8262H114 S 8262H188 3 m 17.1/F 22.6/H
1/4 5.6 0.63 7 7 7 2 2 2 2 2 2 82 82 8262H208 S - 3 m 10.1/F 11.6/H
1/4 5.6 0.63 7 7 7 - - - - - - 82 - - 8262H226 3 m 10.1/F -
1/4 5.6 0.63 4 4 3 3 2 2 2 2 2 82 82 8262H013 S 8262H036 4 m 6.1/F 10.6/H
1/4 7.1 0.76 6 6 6 4 3 3 3 3 3 82 82 8262H212 8262H230 3 m 17.1/F 22.6/H
1/4 7.1 0.76 4 5 4 2 2 2 2 2 1 82 82 8262H210 - 3 m 10.1/F 11.6/H
1/4 7.1 0.76 4 5 4 - - - - - - 82 - - 8262H189 3 m 10.1/F -
1/4 7.1 0.76 2 2 2 2 2 1 2 2 1 82 82 8262H090 8262H038 4 m 6.1/F 10.6/H
3/8 3.2 0.30 34 26 24 19 21 11 17 19 10 82 82 8263H115 8263H191 5 m 17.1/F 22.6/H
3/8 3.2 0.30 23 21 15 9 9 6 8 7 5 82 82 8263H232 - 5 m 10.1/F 11.6/H
3/8 3.2 0.30 23 21 15 - - - - - - 82 82 - 8263H190 5 m 10.1/F -
3/8 3.2 0.30 19 18 10 11 9 8 11 8 7 82 82 8263H003 - 6 m 9.1/F 18.6/H
3/8 3.2 0.30 13 12 6 9 8 6 8 7 5 82 82 8263H002 8263H330 6 m 6.1/F 10.6/H
3/8 4.0 0.45 21 14 13 9 9 7 8 8 6 82 82 8263H118 S 8263H193 5 m 17.1/F 22.6/H
3/8 4.0 0.45 14 13 7 4 4 3 4 4 3 82 82 8263H200 S - 5 m 10.1/F 11.6/H
3/8 4.0 0.45 14 13 7 - - - - - - 82 - - 8263H331 ¡ 5 m 10.1/F -
3/8 4.0 0.45 10 10 6 7 5 5 6 5 5 82 82 8263H117 S - 6 m 9.1/F 18.6/H
3/8 4.0 0.45 7 7 3 5 4 4 5 4 4 82 82 8263H116 S 8263H192 6 m 6.1/F 10.6/H
3/8 5.6 0.63 9 7 7 5 5 5 4 4 4 82 82 8263H206 ¡ 8263H332 5 m 17.1/F 22.6/H
3/8 5.6 0.63 7 6 5 2 2 2 2 2 2 82 82 8263H124 - 5 m 10.1/F 11.6/H
3/8 5.6 0.63 7 6 5 - - - - - - 82 - - 8263H195 5 m 10.1/F -
3/8 5.6 0.63 4 4 2 3 2 2 2 2 2 82 82 8263H119 8263H194 6 m 6.1/F 10.6/H
3/8 7.1 0.76 7 6 5 4 3 3 3 3 3 82 82 8263H210 8263H333 5 m 17.1/F 22.6/H
3/8 7.1 0.76 4 4 3 - - - - - - 82 - 8263H125 8263H197 5 m 10.1/F -
3/8 7.1 0.76 2 2 1 2 2 1 2 2 1 82 82 8263H054 8263H196 6 m 6.1/F 10.6/H
¨ Only available with UR disc, limits min. ambient temp. to 32˚F (0˚C). S Valve available with lead-free brass body using suffix “LF”.
¡ ATEX/IECEx certified with prefix “EV”. The term “Lead-Free” for brass materials is defined by SDWA 1417 as having 39
Buy: www.ValinOnline.com | Phone 844-385-3099
l = General Purpose Valve, m = Safety Shutoff Valve | Email:
a maximum weighted [email protected]
average lead content of 0.25% on the wetted surface area.
 2/2
4
SERIES
2-WAY

8262
8263
Dimensions: inches (mm)

Const.
Ref. H K L P W
ins 3.05 1.71 1.19 2.69 1.95
1
mm 77 43 30 68 50
ins 2.85 1.60 1.19 2.50 1.69
2
mm 72 41 30 63 43
ins 3.12 1.79 1.56 2.76 1.95
3
mm 79 45 40 70 50
ins 2.96 1.72 1.56 2.60 1.69
4
mm 75 44 40 66 43
ins 3.20 1.79 1.88 2.77 1.95
5
mm 81 45 48 70 50
ins 3.03 1.72 1.88 2.60 1.69
6
mm 77 44 48 66 43

Const. Ref. 1-6

W

P H

ANPT PIPE THREAD

(2 PLACES)

Mounting Dimensions

Const. Ref. 1, 2 Const. Ref. 3, 4 Const. Ref. 5, 6

(1/8" Pipe) (1/4" Pipe) (3/8" Pipe)
.59 .87 .75
[15] [22.2] [19]
MOUNTING MOUNTING MOUNTING
.30
HOLES .34 HOLES .57 HOLES
[8]
[9] [14]

.87 .81
M5 THREAD [22.2] [20.6]
.69 MOUNTING M5 THREAD M5 THREAD
FLOW .25 [6.4] MIN.FULL MOUNTING
[18] HOLES .30 [7.6] MIN.FULL .24 [6] MIN. FULL
THREAD DEPTH. HOLES FLOW
MOUNTING HOLES FLOW THREAD DEPTH THREAD DEPTH
2 HOLES FOR
MOUNTING 2 HOLES FOR 2 HOLES FOR
MOUNTING MOUNTING

Note: Mounting holes will accept a standard #10-32 machine screw.

40
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]