dfgbd

Project Details Need Support?

Design ID: ME-OT-247445 V 8.52 Visit: www.vention.io/resources/guides/assembly-with-

vention-151
Assembly Time: 07h 52mins
North America: 1-800-940-3617
Design Owners: ever view
Europe: +49-30-56795545
Design Link: www.vention.io/machine-
builder/247445
GETTING STARTED

■ Your welcome package includes key documents such as a bill of materials(BOM), your machine assembly
instructions, and–if you ordered MachineMotion–your automation system diagram.

■ Our support team is here for you. Chat live on www.vention.io, call 1-800-940-3617 , or
email [email protected]

■ We recommend you watch our assembly tutorial videos at www.vention.io/videos

■ Need more help? We offer assembly and integration services through our network of Certified Systems
Integrators.

You will need

5-mm Allen key–included as a gift Rubber mallet (optional)

■ Tighten any Vention Screw (M8) ■ Align extrusions

M8×1.25 helicoidal tap Measuring tape

■ Tap the end of an extrusion to insert a fastener ■ Check extrusion sizes and measure the space
■ Use with a drill for easier tapping needed for your machine

Power drill (optional) Laptop with Google Chrome browser installed

■ Tighten fasteners quickly ■ Access and view your design in 3D

■ Use a 5mm hex–included as a gift ■ Watch assembly tutorial videos

■ Torque between 13 and 16 Nm

Vention ruler–included as a gift Documents and diagrams

■ Effortlessly space T-nuts and fasteners ■ Keep track of parts using your BOM
■ Measure distances and angles ■ Determine how to connec to MachineMotion using

your automation system diagram

Unboxing

■ Open every box first. Group similar parts together so you can ■ As you discard the packaging, be careful to not accidentally

find them more easily during assembly. throw a part away. Please recycle as much as possible.
■ Consider placing the flattened carboard boxes on the floor

under your components to prevent them from getting scratched

during assembly.

Page 2 of 15
PRO TIPS DURING ASSEMBLY

We have assembled and helped our clients assemble hundreds of Vention machines.

We recommend these five best practices:

1. Work together with one or more colleagues; this reduces 4. Insert T-nuts efficiently.
assembly time and prevents mistakes.
■ You can slide T-nuts in from the end of an extrusion, or insert

them anywhere along the length of the extrusion–no need to

2. Refer to your machine's 3D design, which you can find at
dismantle to insert a T-nut.
www.vention.io/machine-builder/247445
■ Aim to insert all the T-nuts in an extrusion from the side all at
■ If you can't access the design, check whether you've been once; this ultimately saves time.

added as a collaborator. Note that the design owners can create ■ Use the Vention-provided ruler and its spacer to easily place
and share a specific link for assembly-only collaborators. the T-nuts at 45-mm distances from each other.

■ Access the Annotations and Views toolbars (center left) to ■ T-nuts work similarly regardless of their orientation. No need to

explore the design: orient them in the same direction inside the T-slot.

Exploded view shows how parts fit together.

5. Manage fasteners wisely.
Parts Annotation view shows part numbers and dimensions.
■ The vast majority of Vention fasteners are M8×20 mm, but
Measurement view shows distance between faces and
some parts use different ones (like M8×25 mm and M8×12 mm).
edges.
Check which parts they go with by referring to your BOM or
Design Tree view shows the fasteners that go with each
MachineBuilder Design Tree.
part.
■ Tighten fasteners with your fingers first, and leave them slightly

3. Plan your assembly sequentially loose until you've finished assembling a sub-section. Once

you've completely assembled your machine (or a sub-assembly),

■ Build multiple sub-assemblies and combine them together.
tighten each fastener to a torque of 13 Nm.
Avoid adding to a single structure.
■ Some users find it faster and easier to use a power drill,
■ Start from the ground level and build your machine upwards (in
whereas others believe an Allen key to be sufficient. See what
multiple sub-assemblies)
works for you.
■ If installing panels, plan to insert the panels when there is still an
opening to do so.

For best results, please visit www.vention.io/docs for the latest

assembly guides and datasheets

Page 3 of 15
01 FULL VIEW OF SUB ASSEMBLY

1X 1X
1 ST-EXT-002-0315 2 ST-EXT-001-1575

1X 3X 3X
3 ST-HP-003-0005 + HW-FN-003-0018 + HW-FN-002-0001

1X 5X 5X
4 ST-GP-001-0009 + HW-FN-003-0018 + HW-FN-002-0001

Page 4 of 15
02 FULL VIEW OF SUB ASSEMBLY

1X 2X
1 ST-EXT-002-0315 2 HW-EC-001-0001

1X 3X 3X
3 ST-GP-003-0005 + HW-FN-003-0018 + HW-FN-002-0001

Page 5 of 15
03 FULL VIEW OF SUB ASSEMBLY

1X 1X
1 ST-EXT-001-1575 2 HW-EC-002-0001

2X 6X 6X
3 ST-HP-003-0005 + HW-FN-003-0018 + HW-FN-002-0001

Page 6 of 15
04 FULL VIEW OF SUB ASSEMBLY

2X 1X
1 HW-EC-001-0001 2 ST-PN-001-0003__2 Panel ID: 39

1X 2X 2X
3 CE-LI-002-0000 + HW-FN-002-0004 + HW-FN-005-0012

Page 7 of 15
05 FULL VIEW OF SUB ASSEMBLY

Page 8 of 15
05

1X 2X
1 ST-EXT-005-0270 2 HW-EC-005-0001

1X 2X 2X
3 ST-GP-003-0002 + HW-FN-003-0016 + HW-FN-002-0001

1X 2X 1X
4 ST-PN-007-0001 Panel ID: 50 + HW-FN-003-0018 + HW-FN-002-0001

1X 4X 4X
5 ST-GP-002-0005 + HW-FN-003-0018 + HW-FN-003-0035 +
12X 4X
HW-FN-002-0001 + HW-FN-003-0030

Page 9 of 15
06 FULL VIEW OF SUB ASSEMBLY

1X 1X
1 ST-EXT-001-0585 2 HW-EC-001-0001

1X 12X 12X
3 ST-RB-033-0585 + HW-FN-003-0018 + HW-FN-002-0001

Page 10 of 15
07 FULL VIEW OF SUB ASSEMBLY

1X
1 PR-CZ-001-0562

Page 11 of 15
08 FULL VIEW OF SUB ASSEMBLY

1X
1 PR-SK-001-0548

Page 12 of 15
09 FULL VIEW OF SUB ASSEMBLY

1X 8X
1 ST-RB-017-0005 + HW-FN-003-0030

1X 5X 5X
2 ST-GP-001-0009 + HW-FN-003-0018 + HW-FN-002-0001

1X 4X 4X
3 ST-RB-002-0001 + HW-FN-003-0014 + HW-FN-002-0001

Page 13 of 15
10 FULL VIEW OF SUB ASSEMBLY

1X
1 PR-CZ-001-0508

Page 14 of 15
Assembly Instructions are automatically generated based on your design and are provided for guidance purposes only. Vention

recommends using MachineBuilder for a more exhaustive view of your design. You are responsible to ensure your designs are

properly assembled and installed. Vention will not be held liable for the content provided in the assembly instructions and will
not be held responsible for any claim arising from the use or misuse of the Assembly Instructions.

Page 15 of 15