PRODUCT INFORMATION

DuPont™ Delrin® 500P NC010

ACETAL RESIN
Product Information
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as
resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating
characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.

Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.

Delrin® 500P is a general purpose medium viscosity acetal homopolymer for injection molding. It has improved processing thermal
stability, a good combination of mechanical properties, and low VOC emissions.
General information Value Unit Test Standard
Resin Identification POM - ISO 1043
Part Marking Code POM - ISO 11469
Rheological properties Value Unit Test Standard
Melt volume-flow rate 13 cm³/10min ISO 1133
Temperature 190 °C ISO 1133
Load 2.16 kg ISO 1133
Melt mass-flow rate 15 g/10min ISO 1133
Melt mass-flow rate, Temperature 190 °C ISO 1133
Melt mass-flow rate, Load 2.16 kg ISO 1133
Molding shrinkage, parallel 2.0 % ISO 294-4, 2577
Molding shrinkage, normal 1.9 % ISO 294-4, 2577
Mechanical properties Value Unit Test Standard
Tensile Modulus 3100 MPa ISO 527-1/-2
Yield stress 70.5 MPa ISO 527-1/-2
Yield strain 17 % ISO 527-1/-2
Nominal strain at break 30 % ISO 527-1/-2
Flexural Modulus 3000 MPa ISO 178
Flexural Stress at 3.5% 80 MPa ISO 178
Tensile creep modulus ISO 899-1
1h 2800 MPa
1000h 1600 MPa
Charpy impact strength ISO 179/1eU
73°F 320 kJ/m²
-22°F 280 kJ/m²
Charpy notched impact strength ISO 179/1eA
73°F 9 kJ/m²
-22°F 8 kJ/m²
Puncture - maximum force, 73°F 2000 N ISO 6603-2
Puncture energy, 73°F 3 J ISO 6603-2
Izod notched impact strength ISO 180/1A
73°F 9 kJ/m²
-22°F 8 kJ/m²
Izod impact strength ISO 180/1U
73°F 280 kJ/m²
-22°F 250 kJ/m²
Ball indentation hardness, H 358/30 192 MPa ISO 2039-1
Ball indentation hardness, H 961/30 170 MPa ISO 2039-1
Hardness, Rockwell, M-scale 92 - ISO 2039-2
Hardness, Rockwell, R-scale 120 - ISO 2039-2
Thermal properties Value Unit Test Standard
Melting temperature, 18°F/min 178 °C ISO 11357-1/-3

Revised: 2018-05-31 Page: 1 of 12

To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.
North America Asia Pacific Europe/Middle East/Africa
DONGGUAN FUMEI PLASTICS CO.,LTD. TEL: +86 0769-82339888 / 87798999
EMAIL: [email protected]
Copyright 2017 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E.I. du Pont de Nemours and
Company or its affiliates. All rights reserved.
DuPont™ Delrin® 500P NC010
ACETAL RESIN
Temp. of deflection under load ISO 75-1/-2
260 psi 95 °C
65 psi 160 °C
260 psi, annealed 110 °C
Vicat softening temperature, 90°F/h, 11 lbf 155 °C ISO 306
Ball pressure test 165 °C IEC 60309
Coeff. of linear therm. expansion, parallel 100 E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion ISO 11359-1/-2
normal 100 E-6/K
Normal, -40-23°C 90 E-6/K
Parallel, -40-23°C 90 E-6/K
Thermal conductivity of melt 0.24 W/(m K) -
Eff. thermal diffusivity 9E-8 m²/s -
RTI, electrical UL 746B
30mil 50 °C
60mil 110 °C
120mil 110 °C
RTI, impact UL 746B
30mil 50 °C
60mil 85 °C
120mil 90 °C
RTI, strength UL 746B
30mil 50 °C
60mil 90 °C
120mil 95 °C
Flammability Value Unit Test Standard
Burning Behav. at 60mil nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.5 mm IEC 60695-11-10
UL recognition yes - UL 94
Burning Behav. at thickness h HB class IEC 60695-11-10
Thickness tested 0.8 mm IEC 60695-11-10
UL recognition yes - UL 94
Oxygen index 22 % ISO 4589-1/-2
Glow Wire Flammability Index IEC 60695-2-12
40mil 550 °C
80mil 550 °C
120mil 550 °C
FMVSS Class B - ISO 3795 (FMVSS 302)
Burning rate, Thickness 1 mm 20 mm/min ISO 3795 (FMVSS 302)
Electrical properties Value Unit Test Standard
Relative permittivity IEC 62631-2-1
100Hz 3.8 -
1MHz 3.8 -
Dissipation factor IEC 62631-2-1
100Hz 90 E-4
1MHz 55 E-4
Volume resistivity 2E12 Ohm*m IEC 62631-3-1
Surface resistivity 4E14 Ohm IEC 62631-3-2
Electric strength 44 kV/mm IEC 60243-1
Comparative tracking index 600 - IEC 60112
Other properties Value Unit Test Standard
Humidity absorption, 80mil 0.2 % Sim. to ISO 62
Water absorption, 80mil 1.3 % Sim. to ISO 62
Density 1420 kg/m³ ISO 1183
Density of melt 1190 kg/m³ -

Revised: 2018-05-31 Page: 2 of 12

To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.
North America Asia Pacific Europe/Middle East/Africa
DONGGUAN FUMEI PLASTICS CO.,LTD. TEL: +86 0769-82339888 / 87798999
EMAIL: [email protected]
Copyright 2017 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E.I. du Pont de Nemours and
Company or its affiliates. All rights reserved.
DuPont™ Delrin® 500P NC010
ACETAL RESIN
VDA Properties Value Unit Test Standard
Emissions <8 mg/kg VDA 275
Fogging, F-value (refraction) 90 % ISO 6452
Fogging, G-value (condensate) 0.35 mg ISO 6452
1:
Injection Value Unit Test Standard
Drying Recommended yes - -
Drying Temperature ≥80 °C -
Drying Time, Dehumidified Dryer 2-4 h -
Processing Moisture Content ≤0.2 % -
Melt Temperature Optimum 215 °C -
Min. melt temperature 210 °C -
Max. melt temperature 220 °C -
Mold Temperature Optimum 90 °C -
Min. mold temperature 80 °C -
Max. mold temperature 100 °C -
Hold pressure range 80 - 100 MPa -
Hold pressure time 8 s/mm -
Annealing time, optional 30 min/mm -
Annealing temperature 160 °C -

Characteristics
Processing Injection Molding
Delivery form Pellets
Additives Lubricants Release agent
North America Asia Pacific Near East/Africa
Regional Availability
Europe South and Central America Global

Processing Texts

Injection molding
Drying is recommended, but not necessary for newly opened packaging stored in a dry location.

Follow the drying guidelines above in the following cases:

· If moisture is above the Processing Moisture Content recommendation,
· When a resin container is damaged,
· When the material is not properly stored in a dry place at room temperature, or
· When packaging stays open for a significant time.

Revised: 2018-05-31 Page: 3 of 12

To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.
North America Asia Pacific Europe/Middle East/Africa
DONGGUAN FUMEI PLASTICS CO.,LTD. TEL: +86 0769-82339888 / 87798999
EMAIL: [email protected]
Copyright 2017 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E.I. du Pont de Nemours and
Company or its affiliates. All rights reserved.
DuPont™ Delrin® 500P NC010
ACETAL RESIN

Diagrams

Viscosity-shear rate

1E3 200 °C
215 °C
230 °C
Viscosity in Pa s

1E2

1E1
1E2 1E3 1E4

Shear rate in 1/s

Shearstress-shear rate

1E6 200 °C
215 °C
230 °C
Shearstress in Pa

1E5

1E4
1E2 1E3 1E4

Shear rate in 1/s

Revised: 2018-05-31 Page: 4 of 12

To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.
North America Asia Pacific Europe/Middle East/Africa
DONGGUAN FUMEI PLASTICS CO.,LTD. TEL: +86 0769-82339888 / 87798999
EMAIL: [email protected]
Copyright 2017 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E.I. du Pont de Nemours and
Company or its affiliates. All rights reserved.
DuPont™ Delrin® 500P NC010
ACETAL RESIN

Dynamic Shear modulus-temperature

1E4
Shear modulus in MPa

1E3

1E2
-50 0 50 100 150

Temperature in °C

Revised: 2018-05-31 Page: 5 of 12

To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.
North America Asia Pacific Europe/Middle East/Africa
DONGGUAN FUMEI PLASTICS CO.,LTD. TEL: +86 0769-82339888 / 87798999
EMAIL: [email protected]
Copyright 2017 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E.I. du Pont de Nemours and
Company or its affiliates. All rights reserved.
DuPont™ Delrin® 500P NC010
ACETAL RESIN

Stress-strain

100 Y -40 °C
-20 °C
0 °C
Y 23 °C
40 °C
60 °C
80 Y 90 °C
120 °C

Y Y - Yield

60
Stress in MPa

40
Y

Y
20

0
0 5 10 15 20

Strain in %

Revised: 2018-05-31 Page: 6 of 12

To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.
North America Asia Pacific Europe/Middle East/Africa
DONGGUAN FUMEI PLASTICS CO.,LTD. TEL: +86 0769-82339888 / 87798999
EMAIL: [email protected]
Copyright 2017 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E.I. du Pont de Nemours and
Company or its affiliates. All rights reserved.
DuPont™ Delrin® 500P NC010
ACETAL RESIN

Secant modulus-strain

5000 -40 °C
-20 °C
0 °C
23 °C
40 °C
60 °C
4000 90 °C
120 °C

Y - Yield
Secant modulus in MPa

3000

2000

1000
Y

Y Y YY
Y Y
0
0 5 10 15 20

Strain in %

Revised: 2018-05-31 Page: 7 of 12

To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.
North America Asia Pacific Europe/Middle East/Africa
DONGGUAN FUMEI PLASTICS CO.,LTD. TEL: +86 0769-82339888 / 87798999
EMAIL: [email protected]
Copyright 2017 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E.I. du Pont de Nemours and
Company or its affiliates. All rights reserved.
DuPont™ Delrin® 500P NC010
ACETAL RESIN

Stress-strain (isochronous) 23°C

20 1 h
10 h
100 h
1000 h
10000 h
100000 h

15
Stress in MPa

10

0
0 0.5 1 1.5 2

Strain in %

Revised: 2018-05-31 Page: 8 of 12

To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.
North America Asia Pacific Europe/Middle East/Africa
DONGGUAN FUMEI PLASTICS CO.,LTD. TEL: +86 0769-82339888 / 87798999
EMAIL: [email protected]
Copyright 2017 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E.I. du Pont de Nemours and
Company or its affiliates. All rights reserved.
DuPont™ Delrin® 500P NC010
ACETAL RESIN

Creep modulus-time 23°C

3500 1 MPa
2 MPa
3 MPa
4 MPa
3000 5 MPa
6 MPa
Creep modulus in MPa

2500

2000

1500

1000

500
1E0 1E1 1E2 1E3 1E4 1E5

Time in h

Specific volume-temperature (pvT)

0.9 0.1 MPa

40 MPa
120 MPa
200 MPa
0.85
Spec. volume in E-3 m³/kg

0.8

0.75

0.7

0.65
0 50 100 150 200 250

Temperature in °C

Revised: 2018-05-31 Page: 9 of 12

To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.
North America Asia Pacific Europe/Middle East/Africa
DONGGUAN FUMEI PLASTICS CO.,LTD. TEL: +86 0769-82339888 / 87798999
EMAIL: [email protected]
Copyright 2017 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E.I. du Pont de Nemours and
Company or its affiliates. All rights reserved.
DuPont™ Delrin® 500P NC010
ACETAL RESIN

Tensile modulus-temperature

1E4
Tensile modulus in MPa

1E3

1E2
-50 0 50 100 150

Temperature in °C

Coeff. of linear thermal expansion, normal

250 250

200 200
CLTEn in E-6/K

CLTEp in E-6/K

150 150

100 100
-50 0 50 100 150

Temperature in °C

Revised: 2018-05-31 Page: 10 of 12

To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.
North America Asia Pacific Europe/Middle East/Africa
DONGGUAN FUMEI PLASTICS CO.,LTD. TEL: +86 0769-82339888 / 87798999
EMAIL: [email protected]
Copyright 2017 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E.I. du Pont de Nemours and
Company or its affiliates. All rights reserved.
DuPont™ Delrin® 500P NC010
ACETAL RESIN

Chemical Media Resistance

Acids
Acetic Acid (5% by mass) (23°C)
Citric Acid solution (10% by mass) (23°C)
Lactic Acid (10% by mass) (23°C)
Hydrochloric Acid (36% by mass) (23°C)
Nitric Acid (40% by mass) (23°C)
Sulfuric Acid (38% by mass) (23°C)
Sulfuric Acid (5% by mass) (23°C)
Chromic Acid solution (40% by mass) (23°C)

Bases
Sodium Hydroxide solution (35% by mass) (23°C)
Sodium Hydroxide solution (1% by mass) (23°C)
Ammonium Hydroxide solution (10% by mass) (23°C)

Alcohols
Isopropyl alcohol (23°C)
Methanol (23°C)
Ethanol (23°C)

Hydrocarbons
n-Hexane (23°C)
Toluene (23°C)
iso-Octane (23°C)

Ketones
Acetone (23°C)

Ethers
Diethyl ether (23°C)

Mineral oils
SAE 10W40 multigrade motor oil (23°C)
SAE 10W40 multigrade motor oil (130°C)
SAE 80/90 hypoid-gear oil (130°C)
Insulating Oil (23°C)

Standard Fuels
ISO 1817 Liquid 1 - E5 (60°C)
ISO 1817 Liquid 2 - M15E4 (60°C)
ISO 1817 Liquid 3 - M3E7 (60°C)
ISO 1817 Liquid 4 - M15 (60°C)
Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C)
Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C)

Revised: 2018-05-31 Page: 11 of 12

To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.
North America Asia Pacific Europe/Middle East/Africa
DONGGUAN FUMEI PLASTICS CO.,LTD. TEL: +86 0769-82339888 / 87798999
EMAIL: [email protected]
Copyright 2017 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E.I. du Pont de Nemours and
Company or its affiliates. All rights reserved.
DuPont™ Delrin® 500P NC010
ACETAL RESIN
Diesel fuel (pref. ISO 1817 Liquid F) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (90°C)
Diesel fuel (pref. ISO 1817 Liquid F) (>90°C)
Diesel EN 590 (100°C)

Salt solutions
Sodium Chloride solution (10% by mass) (23°C)
Sodium Hypochlorite solution (10% by mass) (23°C)
Sodium Carbonate solution (20% by mass) (23°C)
Sodium Carbonate solution (2% by mass) (23°C)
Zinc Chloride solution (50% by mass) (23°C)

Other
Ethyl Acetate (23°C)
Hydrogen peroxide (23°C)
DOT No. 4 Brake fluid (130°C)
Ethylene Glycol (50% by mass) in water (108°C)
1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C)
50% Oleic acid + 50% Olive Oil (23°C)
Water (23°C)
Water (90°C)
Phenol solution (5% by mass) (23°C)

Symbols used:
possibly resistant
Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and
expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, property change).

not recommended - see explanation

Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast
cleaning with thorough rinsing, spills, wiping, vapor exposure).

Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.
ISO Mechanical properties measured at 160 mil (Hytrel® measured at 80 mil), IEC Electrical properties measured at 80 mil, all ASTM properties
measured at 120 mil, and test temperatures are 73°F unless otherwise stated.

The information set forth herein is furnished free of charge and is based on technical data that DuPont believes to be reliable and falls within
the normal range of properties. It is intended for use by persons having technical skill, at their own discretion and risk. This data should not be
used to establish specification limits nor used alone as the basis of design. Handling precaution information is given with the understanding that
those using it will satisfy themselves that their particular conditions of use present no health or safety hazards. Since conditions of product use
and disposal are outside our control, we make no warranties, express or implied, and assume no liability in connection with any use of this
information. As with any product, evaluation under end-use conditions prior to specification is essential. Nothing herein is to be taken as a
license to operate or a recommendation to infringe on patents. Caution: Do not use in medical applications involving permanent implantation in
the human body. For other medical applications, discuss with your DuPont customer representative and read Medical Caution H-50103-5.

Copyright © 2017 DuPont or its affiliates. All Rights Reserved. The DuPont Oval Logo, DuPont™, The miracles of science™ and all products
denoted with ® or ™ are registered trademarks or trademarks of E.I. du Pont de Nemours and Company or its affiliates.

Revised: 2018-05-31 Page: 12 of 12

To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.
North America Asia Pacific Europe/Middle East/Africa
DONGGUAN FUMEI PLASTICS CO.,LTD. TEL: +86 0769-82339888 / 87798999
EMAIL: [email protected]
Copyright 2017 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E.I. du Pont de Nemours and
Company or its affiliates. All rights reserved.