RBS 6101

LTE 2100 MHz

JSJ046 - ROEHAMPTON

AOP 2022

LZN/IPB 028 JSJ046 R1A

SITE ENGINEERING
DOCUMENTATION
 DOCUMENT LIST
Prepared (also subject responsible if other) Document. No

CALATEL 127 04-IPB 028 JSJ046 Uen

Approved Date Rev. Reference:
JSJ046_ROEHAMPTON_SED_LTE 2100
ERICSSON 6/19/22 A MHz.xls

Project: AOP 2022

Site: JSJ046 ROEHAMPTON

Document name Document number Rev.

SITE ENGINEERING DOCUMENTATION LZN/IPB 028 JSJ046 R1A A

CAPTION LIST 001 53-IPB 028 JSJ046 Uen A

1 DOCUMENT LIST 127 04-IPB 028 JSJ046 Uen A

2 SITE DRAWINGS
Situating Plan 153 38-IPB 028 JSJ046 Uen A
Floorplan Drawing 193 05-IPB 028 JSJ046 Uen A
Aerial Placing Information 153 12-IPB 028 JSJ046 Uen A
Requirement Summary JSJ046 A

3 SITE SPECIFICATIONS
Configuration Data 127 04-IPB 028 JSJ046 Uen A

4 ALLOCATION DOCUMENTS
Allocation Drawing: Cabinets 193 26-IPB 028 JSJ046 Uen A

5 CABLING DOCUMENTS
Solution Diagram 1/001-IPB 028 JSJ046 Uen A
Router Diagram 1/002-IPB 028 JSJ046 Uen A

6 LABELS A
Material List 2/001-IPB 028 JSJ046 Uen A
Acceptance Certificate 2/002-IPB 028 JSJ046 Uen A
Abbreviation List 006 52-IPB 028 JSJ046 Uen A

7 ADDITIONAL INFORMATION
Allocation Table 3/001-IPB 028 JSJ046 Uen A
Datasheet 3/002-IPB 028 JSJ046 Uen A
Photos Photos JSJ046 A

Copyright © 2011 by Ericsson AB

 SITUATING PLAN
Prepared Nr - No

CALATEL 153 38-IPB 028 JSJ046 Uen

Approved Kontr - Checked Datum - Date Rev. ReferenceÑ

ERICSSON 06/19/22 A JSJ046_ROEHAMPTON_SED_LTE 2100 MHz.xls

Project: AOP 2022

Site name: JSJ046 ROEHAMPTON
1 GENERAL
1.1 Coordinates Long: -77.912245
Lat: 18.401564
1.2 Location: Parroquia de Saint James, Jamaica

1.3 Type of building Greenfield

1.4 ML TN Placed on: N/A

1.5 SITUATING PLAN

JSJ046_ROEHAMPTON
 1 2 3 4

14.93

3.63

8.85
A A

4.28

5.39
RBS

A Lattice Tower
H: 45.0 m

8.95

B ELECTRIC B
3.00 MOTOR
GENERATOR

C 1.99
1.19
0.50
20.00

3.09
C C

87°

4.38
RBS
ZTE
RBS
ZTE

0.99 1.29

D D
DIGICEL
2.98 MOTOR
GENERATOR
3.68

0.79 4.01

10.94

E E

EXISTING SITE PLAN

JSJ046_ROEHAMPTON
Aerial Placing Information
JAMAICA
Prepared (also subject responsible if other)
E
CALATEL
Reference Doc respons/Approved Date Rev

F
JSJ046_ROEHAMPTON ERICSSON 19/06/2022 A F
Product name

JSJ046_ROEHAMPTON

Document No. Sheet

Escale
193 05-IPB 558- JSJ046 -Ues 1(6)
N/A
1 2 3 4
 1 2 3 4

A A

RADIO 01 B2
SECTOR 2 SECTOR 2
EXISTING ANTENNA EXISTING ANTENNA
WCDMA 850/1900MHz LTE 700MHz
RADIO 01 B5 RADIO 11 B12
SECTOR B
EXISTING ANTENNA
GSM 850MHz
RRUS 01 B5
SECTOR A NOT WORKING
B B
EXISTING ANTENNA
GSM 850MHz
RRUS 01 B5
NOT WORKING
SECTOR 1
EXISTING ANTENNA
LTE 700MHz
RADIO 11 B12
Lattice Tower
H: 45.0 m
RADIO 01 B2

C
SECTOR 1 C
EXISTING ANTENNA
WCDMA 850/1900MHz
RADIO 01 B5

SECTOR 3
EXISTING ANTENNA
WCDMA 850/1900MHz
87° RADIO 01 B2 RADIO 01 B5
SECTOR C SECTOR 3
EXISTING ANTENNA EXISTING ANTENNA
D GSM 850MHz LTE 700MHz D

RRUS 01 B5 RADIO 11 B12

NOT WORKING

LTE 700 MHz WCDMA 850/1900 MHz

SECTOR AZIMUTH H (Mts) MT ET ANTENNA MODEL SECTOR AZIMUTH H (Mts) MT ET ANTENNA MODEL
1 5° 40.00 1° 10° ODI-065R17M-GQ 1 15° 40.00 1° 0°/4º 80010306v02
2 120° 40.00 0° 10° ODI-065R17M-GQ 2 180° 40.00 1° 0°/5º 80010306v02
3 280° 40.00 0° 10° ODI-065R17M-GQ 3 280° 40.00 1° 0°/5º 80010306v02

E E

EXISTING SITE PLAN

JSJ046_ROEHAMPTON
Aerial Placing Information
JAMAICA
Prepared (also subject responsible if other)
E
CALATEL
Reference Doc respons/Approved Date Rev

F
JSJ046_ROEHAMPTON ERICSSON 19/06/2022 A F
Product name

JSJ046_ROEHAMPTON

Document No. Sheet

Escale
153 12-IPB 558- JSJ046 -Ues 2(6)
N/A
1 2 3 4
 1 2 3 4

EXISTING EXISTING EXISTING

ANTENNA ANTENNA ANTENNA
H:46.0mts H:46.0mts H:46.0mts

EXISTING
A SECTOR 1 SECTOR 2 ANTENNA MW SECTOR 3 A
EXISTING EXISTING H:42.0m EXISTING
ANTENNA ANTENNA ANTENNA
LTE 700MHz LTE 700MHz LTE 700MHz
RADIO 11 B12 RADIO 11 B12 RADIO 11 B12

SECTOR A SECTOR B SECTOR C

EXISTING SECTOR 1 EXISTING SECTOR 2 EXISTING SECTOR 3
ANTENNA EXISTING ANTENNA EXISTING ANTENNA EXISTING
GSM 850MHz ANTENNA GSM 850MHz ANTENNA GSM 850MHz ANTENNA
RRUS 01 B5 WCDMA 850MHz RRUS 01 B5 WCDMA 850MHz RRUS 01 B5 WCDMA 850MHz
NOT WORKING RADIO 01 B5 NOT WORKING RADIO 01 B5 NOT WORKING RADIO 01 B5
RADIO 01 B2 RADIO 01 B2 RADIO 01 B2
FREE PIPE
H:27.0m
B B

EXISTING
ANTENNA MW
H:32.0m

FREE PIPE FREE PIPE FREE PIPE

H:27.0m H:27.0m H:27.0m

C C

D D

TOWER 45.0mts TOWER 45.0mts TOWER 45.0mts

LTE 700 MHz WCDMA 850/1900 MHz
SECTOR AZIMUTH H (Mts) MT ET ANTENNA MODEL SECTOR AZIMUTH H (Mts) MT ET ANTENNA MODEL
E E
1 5° 40.00 1° 10° ODI-065R17M-GQ 1 15° 40.00 1° 0°/4º 80010306v02
2 120° 40.00 0° 10° ODI-065R17M-GQ 2 180° 40.00 1° 0°/5º 80010306v02
3 280° 40.00 0° 10° ODI-065R17M-GQ 3 280° 40.00 1° 0°/5º 80010306v02

EXISTING ELEVATION VIEW

JSJ046_ROEHAMPTON
Aerial Placing Information
JAMAICA
Prepared (also subject responsible if other)
E
CALATEL
Reference Doc respons/Approved Date Rev

F
JSJ046_ROEHAMPTON ERICSSON 19/06/2022 A F
Product name

JSJ046_ROEHAMPTON

Document No. Sheet

Escale
153 12-IPB 558- JSJ046 -Ues 3(6)
N/A
1 2 3 4
 1 2 3 4

14.93

3.63
REUSE BB5212 FOR
8.85 LTE 700/2100 MHz
A B REUSE EXISTING A
ROUTER 6471 AND
ITS MAGAZINE
4.28

5.39
RBS

A Lattice Tower
H: 45.0 m

8.95

ELECTRIC
3.00 MOTOR
GENERATOR

B B

C 1.99
1.19
0.50
20.00

3.09

87°

C C

4.38
RBS
ZTE
RBS
ZTE

0.99 1.29

DIGICEL
2.98 MOTOR
GENERATOR
3.68

D D
0.79 4.01

10.94

NOTE: 6- REUSE EXISTING BASEBAND 5212 FOR LTE

1 - SWAP OF THE EXISTING LTE ANTENNAS FOR 700MHz/ LTE 2100 MHZ.
ANTENNA 6P MODEL 84510866 FOR LTE 700MHz/ LTE 7- REUSE ROUTER 6471 AND ITS MAGAZINE.
2100MHz 8- REUSE EXISTING RADIOS LTE 700MHz
2- INSTALL 2 NEW RADIO 4499 B2 B25 B66A FOR LTE 9- REUSE EXISTING GROUNDING
2100MHZ IN PIPE EXISTING 10- INSTALL PDU 0302.
3- INSTALL 2 SPDs FOR NEW RADIOS. 11- REUSE REUSE PSU.
E 4- INSTALL NEW FIBER CABLE FOR NEW RRUs, 12- INSTALL 10 Jumpers 4.3-10 OF 3m AND 2 Jumpers of E
2x 70 m 10m
5- INSTALL NEW DC POWER CABLE FOR NEW 13- DISMANTLING, SECURING AND STORING OF THE
RRUs, 2x 70m UNUSED LTE700 ANTENNAS

PROPOSED SITE PLAN

JSJ046_ROEHAMPTON
Aerial Placing Information
JAMAICA
Prepared (also subject responsible if other)
E
CALATEL
Reference Doc respons/Approved Date Rev

JSJ046_ROEHAMPTON ERICSSON 19/06/2022 A

F F
Product name

JSJ046_ROEHAMPTON

Document No. Sheet

Escale
153 12-IPB 558- JSJ046 -Ues 4(6)
N/A
1 2 3 4
 1 2 3 4
RADIO 01 B2
SECTOR 2 SECTOR 2
EXISTING ANTENNA NEW ANTENNA FOR
WCDMA 850/1900MHz LTE 700 / 2100 MHz
RADIO 01 B5 REUSE RADIO 11 B12
FOR LTE 700MHz
A INSTALL NEW RADIO 4499 B2 B25 A
B66A FOR LTE 2100MHz S2 AND S3
SECTOR A
EXISTING ANTENNA
GSM 850MHz
RRUS 01 B5
NOT WORKING
SECTOR B
EXISTING ANTENNA
SECTOR 1
GSM 850MHz
NEW ANTENNA FOR
RRUS 01 B5
LTE 700 / 2100 MHz
NOT WORKING
REUSE RADIO 11 B12 Lattice Tower
FOR LTE 700MHz
INSTALL NEW RADIO 4499
H: 45.0 m
B2 B25 B66A
B B
FOR LTE 2100MHz

RADIO 01 B2
SECTOR 1
EXISTING ANTENNA
WCDMA 850/1900MHz
RADIO 01 B5
SECTOR 3
EXISTING ANTENNA
RADIO 01 B2 WCDMA 850/1900MHz
87° RADIO 01 B5
SECTOR 3
SECTOR C NEW ANTENNA FOR
EXISTING ANTENNA LTE 700 / 2100 MHz
C GSM 850MHz REUSE RADIO 11 B12 C
RRUS 01 B5 FOR LTE 700MHz
NOT WORKING SHARE RADIO S2
FOR LTE 2100MHz

NOTE: 7- REUSE ROUTER 6471 AND ITS

1 - SWAP OF THE EXISTING LTE MAGAZINE.
ANTENNAS FOR ANTENNA 6P MODEL 8- REUSE EXISTING RADIOS LTE 700MHz
84510866 FOR LTE 700MHz/ LTE 2100MHz 9- REUSE EXISTING GROUNDING
2- INSTALL 2 NEW RADIO 4499 B2 B25 10- INSTALL PDU 0302.
B66A FOR LTE 2100MHZ IN PIPE EXISTING 11- REUSE REUSE PSU.
D D
3- INSTALL 2 SPDs FOR NEW RADIOS. 12- INSTALL 10 Jumpers 4.3-10 OF 3m AND
4- INSTALL NEW FIBER CABLE FOR NEW 2 Jumpers of 10m
RRUs, 2x 70 m 13- DISMANTLING, SECURING AND
5- INSTALL NEW DC POWER CABLE FOR STORING OF THE UNUSED LTE700
NEW RRUs, 2x 70m ANTENNAS
6- REUSE EXISTING BASEBAND 5212 FOR
LTE 700MHz/ LTE 2100 MHZ.
LTE 700 MHz/LTE 2100MHz WCDMA 850/1900 MHz
SECTOR AZIMUTH H (Mts) MT ET ANTENNA MODEL SECTOR AZIMUTH H (Mts) MT ET ANTENNA MODEL
E 1 20° 40.00 1° 10°/7º 84510866 1 20° 40.00 1° 0°/4º 80010306v02 E
2 130° 40.00 0° 10°/7º 84510866 2 130° 40.00 1° 0°/5º 80010306v02
3 290° 40.00 0° 10°/7º 84510866 3 290° 40.00 1° 0°/5º 80010306v02

PROPOSED SITE PLAN

JSJ046_ROEHAMPTON
Aerial Placing Information
JAMAICA
Prepared (also subject responsible if other)
E
CALATEL
Reference Doc respons/Approved Date Rev

F
JSJ046_ROEHAMPTON ERICSSON 19/06/2022 A F
Product name

JSJ046_ROEHAMPTON

Document No. Sheet

Escale
153 12-IPB 558- JSJ046 -Ues 5(6)
N/A
1 2 3 4
 1 2 3 4

EXISTING EXISTING EXISTING

ANTENNA ANTENNA ANTENNA
H:46.0mts H:46.0mts H:46.0mts
EXISTING
SECTOR 1 SECTOR 2 ANTENNA MW SECTOR 3
A NEW ANTENNA FOR NEW ANTENNA FOR H:42.0m NEW ANTENNA FOR A
LTE 700 / 2100 MHz LTE 700 / 2100 MHz LTE 700 / 2100 MHz
REUSE RADIO 11 B12 REUSE RADIO 11 B12 REUSE RADIO 11 B12
FOR LTE 700MHz FOR LTE 700MHz FOR LTE 700MHz
INSTALL NEW RADIO INSTALL NEW RADIO 4499 SHARE RADIO S2
4499 B2 B25 B66A B2 B25 B66A FOR LTE FOR LTE 2100MHz
FOR LTE 2100MHz 2100MHz S2 AND S3
SECTOR C
SECTOR A SECTOR 1 SECTOR B SECTOR 2 SECTOR 3
EXISTING
EXISTING EXISTING EXISTING EXISTING EXISTING
ANTENNA
ANTENNA ANTENNA ANTENNA ANTENNA ANTENNA
GSM 850MHz
GSM 850MHz WCDMA 850MHz GSM 850MHz WCDMA 850MHz WCDMA 850MHz
RRUS 01 B5
RRUS 01 B5 RADIO 01 B5 RRUS 01 B5 RADIO 01 B5 RADIO 01 B5
NOT WORKING
NOT WORKING RADIO 01 B2 NOT WORKING RADIO 01 B2 RADIO 01 B2
FREE PIPE
H:27.0m
B B

EXISTING
ANTENNA MW
H:32.0m

FREE PIPE FREE PIPE FREE PIPE

H:27.0m H:27.0m H:27.0m

NOTE:
1 - SWAP OF THE EXISTING LTE
ANTENNAS FOR ANTENNA 6P
MODEL 84510866 FOR LTE 700MHz/
LTE 2100MHz
C 2- INSTALL 2 NEW RADIO 4499 B2 C
B25 B66A FOR LTE 2100MHZ IN PIPE
EXISTING
3- INSTALL 2 SPDs FOR NEW
RADIOS.
4- INSTALL NEW FIBER CABLE
FOR NEW RRUs, 2x 70 m
5- INSTALL NEW DC POWER
CABLE FOR NEW RRUs, 2x 70m
6- REUSE EXISTING BASEBAND
5212 FOR LTE 700MHz/ LTE 2100
MHZ.
7- REUSE ROUTER 6471 AND ITS
MAGAZINE.
8- REUSE EXISTING RADIOS
LTE 700MHz
D D
9- REUSE EXISTING
GROUNDING
10- INSTALL PDU 0302.
11- REUSE REUSE PSU.
12- INSTALL 10 Jumpers 4.3-10 OF
3m AND 2 Jumpers of 10m
13- DISMANTLING, SECURING AND
STORING OF THE UNUSED LTE700
ANTENNAS

TOWER 45.0mts TOWER 45.0mts TOWER 45.0mts

LTE 700 MHz/LTE 2100MHz WCDMA 850/1900 MHz

SECTOR AZIMUTH H (Mts) MT ET ANTENNA MODEL SECTOR AZIMUTH H (Mts) MT ET ANTENNA MODEL
E 1 20° 40.00 1° 10°/7º 84510866 1 20° 40.00 1° 0°/4º 80010306v02 E
2 130° 40.00 0° 10°/7º 84510866 2 130° 40.00 1° 0°/5º 80010306v02
3 290° 40.00 0° 10°/7º 84510866 3 290° 40.00 1° 0°/5º 80010306v02

PROPOSED ELEVATION VIEW

JSJ046_ROEHAMPTON
Aerial Placing Information
JAMAICA
Prepared (also subject responsible if other)
E
CALATEL
Reference Doc respons/Approved Date Rev

F
JSJ046_ROEHAMPTON ERICSSON 19/06/2022 A F
Product name

JSJ046_ROEHAMPTON

Document No. Sheet

Escale
153 12-IPB 558- JSJ046 -Ues 6(6)
N/A
1 2 3 4
 JSJ046_ROEHAMPTON_SED_LTE 2100 MHz.xls SITE ENGINEERING DOCUMENT

REQUIREMENT SUMMARY

ITEM
POWER ->
REUSE AC PANEL
INSTALL 2 NEW SPD's
INSTALL PDU 0302 TO POWER UP THE NEW RADIOS.

ANTENA MOUNTS ->

REUSE EXISTING MOUNTS

CABLE TRAY (HCL & VCL) ->

REUSE HORIZONTAL LADDER EXISTING
REUSE VERTICAL LADDER EXISTING

CABLE CONDUIT FOR RBS ->

REUSE EXISTING MOUNTS

EQUIP. LOCATION ->

REUSE RBS 6101
REUSE BASEBAND AND ROUTER

CABLE ENTRY PORT ->

REUSE CABLE ENTRY PORTS

GROUNDING (RBS & TOWER) ->

REUSE TOWER GROUND BAR

OTHER ->
REUSE BASEBAND 5212 LTE 700 / 2100 MHz
INSTALL 2 NEW RADIOS 4499 B2 B25 B66A FOR LTE 2100 MHz
REUSE ROUTER 6471 AND ITS MAGAZINE
INSTALL NEW FIBER CABLE FOR NEW RRUs, 2 x 70 m
INSTALL NEW DC POWER CABLE FOR NEW RRUs, 2 x 70 m
INSTALL NEW ANTENNAS MOD. 84510866 FOR LTE 700MHz / 2100 MHz
DISMANTLING, SECURING AND STORING OF THE UNUSED LTE700 ANTENNAS

*THE PANORAMIC PHOTOS WERE TAKEN AT THE HEIGHT OF THE TOWER (H:45.0M)
 CONFIGURATION DATA
Prepared (also subject responsible if other) Document. No

CALATEL 127 04-IPB 028 JSJ046 Uen

Approved Date Rev. Reference:

ERICSSON 6/19/22 A JSJ046_ROEHAMPTON_SED_LTE 2100 MHz.xls

Project: AOP 2022 JSJ046

Site: ROEHAMPTON

1 GENERAL SITE DATA

1,1 Geographical coordinates 18.401564 -77.912245
1,2 Address
Parroquia de Saint James, Jamaica
1,3 Building type Greenfield
1,4 Equipment room location See Situating Plan
1,5 Ceiling material N/A
1,6 Wall material N/A
1,7 Floor material LATTICE TOWER
1,8 Air conditioning N/A

2 TECHNICAL DATA RBS (EXISTING AND PROPOSAL) NEW LTE 4G Existing 2G Existing 3G Existing 4G
2,1 Combined Site YES NO NO NO
2,2 System LTE 700 MHz / LTE 2100 MHz 85OMHz 850MHz LTE 700MHz
2,3 RBS type RBS 6101 RBS 6101 RBS 6101 RBS 6101
2,4 No. of sectors 3 3 3 3
2,5 No. of carriers 3X1 3X1 3X1 3X1
2,6 No. of Radio Units (4499 B2 B25 B66A
or RRU's
) 2 RADIOS 4499 B2 B25 B66A 3 RRUS 02 B5 /01B5 3 RRU 01 B5 3 RADIOS 11 B12
2,7 No. of Digital Units (Baseband 5212) or DU/RUS 1 BB 5212 1 DUG 2101 1 DUW 4101 1 BB 5212

3 ELECTRICAL DATA (BASEBAND5212)

3.1 Power Supply (V DC) -48V
3.2 Power consumption (kW) Depends on RBS configuration (HW & SW)
3.3 Mains circuit breaker (A) -
3,4 Heat dissipation (kW) 250 W
BUILD CONCRETE SLAB OF 1.00 m x 1.50 m x 0.33 m.
4 ELECTRICAL DATA RADIO UNIT (4499 B2 B25 B66A )
4,1 Power Supply (V DC) -48V
4,2 Power consumption (kW) Depends on RBS configuration (HW & SW)
4,3 Mains circuit breaker (A) -
4,4 Heat dissipation (kW) 0,35

5 TECHNICAL DATA ANTENNA SUPPORT STRUCTURE

5,1 Tower/mast type Tower
5,2 Tower/mast height (m) 45.0 m
5,3 Type of Building Greenfield

6 TECHNICAL DATA CABLE RF (PROPOSAL)

2100 MHz
Type of F.O Type of feeder
6,1 Type of Feeders/Fibers Sec 1: Singlemode N/A Singlemode
Sec 2: Singlemode N/A Singlemode
Sec 3: Singlemode N/A Singlemode

6,2 Length of Fibers Sec 1: 70 m Sec 1: 1 x 12

Sec 2: 70 m Sec 2: 1 x 15
Sec 3: m Sec 3: 1 x 15

6,3 Length of Energy Cable Sec 1: 1 x 70 m

Sec 2: 1 x 70 m
Sec 3: m
6,4 Lenght of Power cable (RRUS) Sec 1: N/A m Sec 1: N/A m
6,4 Weight of Feeders/Fibers 7/8" 0.49 Kg/m
1 1/4" 0,68 Kg/m
1 5/8" 1.19 Kg/m
Singlemode 120 Kg/Km
6,9 No. of Sec 1: LATTICE TOWER Sec 1: 2 RBS 6201 INDOOR

6,5 Site dependent material data (to be supplied by Ericsson)

Type of Cable Cable Size Quantity Cable length (mts) Comments

Sector 1 Feeder (7/8") (1 1/4") (1 5/8") - - - N/A
Sector 2 Feeder (7/8") (1 1/4") (1 5/8") - - - N/A
Sector 3 Feeder (7/8") (1 1/4") (1 5/8") - - - N/A
Sector 4 Feeder (7/8") (1 1/4") (1 5/8") - - - N/A
Antenna Jumper (2m) (3m) (4m) (5m) (6m) 1/2" 8 /2 3.00 m /10.0m New radio 4499 B2 B25 B66A , and existing 11B12
Equipment Jumper (3m) (4m) (5m) - - - N/A
RRU Ground Cable 15mm2 2 3.00 m For new radio 4499 B2 B25 B66A
RBS & BBU Ground Cable - - - N/A
RBS or DUW Power Cable 6mm2 2 70 For new radio 4499 B2 B25 B66A
AWG #6 DPX Ground Cable - - - N/A
AWG #2 Flexible Cable - - - N/A
IF Cable (7.5) (10) (16) mm - - - N/A
MW Wavelength - - - N/A
RAU Ground Cable - - - N/A
Prepared (also subject responsible if other) Document. No

CALATEL 193 26-IPB 028 JSJ046 Uen

Approved REVIEW Date Rev. Reference:

ERICSSON ERICSSON 6/19/22 A JSJ046_ROEHAMPTON_SED_LTE 2100 MHz.xls

7 ALOCATION CABINET DRAWING

1 2 3 4

R BS 6101
A A

B B

R E U S E E X I S T IN G
IN S T A L L N E W
B ASEB AND 5212
P DU 030 2 AND
F O R L T E 7 0 0 M H z/
R EUSE
L TE 2 100 M HZ.
E X I S T IN G P S U
C C

R EU SE R OUTER
6 4 7 1 A N D IT S
M A G A Z IN E .

D D
SPD SPD
SPD SPD
SPD
SPD
SPD
SPD

IN S T A L L 2 N E W
S PDs

E E

D IA G R A M O F R B S
J S J 0 4 6 _ R O E H A M P TO N
A e r i a l P l a c i n g I n f o rm ation
J A M A IC A
P r e p a r e d ( a l s o s u b j e c t r e s p o n s i b l e if other)
E

C ALATEL
R e fe r e n ce D o c r e s p o n s / A p p rov ed D a te R ev

J SJ 04 6_ RO EH AM PT ON E R IC S S O N 1 9 / 0 6 /2 0 2 2 A
F F
P r o d u c t n am e

J SJ 04 6_ RO EH AM PT ON

D o c u m e n t N o. S heet

E s c ale
4 / 1 9 3 1 8 - I P B 5 5 8 - J S J 0 4 6 -U e s 1 (1 )
N /A

1 2 3 4
 Solution Diagram
Prepared (also subject responsible if other) Document. No

CALATEL 1/001-IPB 028 JSJ046 Uen

Approved Date: Rev.
ERICSSON 6/19/22 A

Project: AOP 2022

Site name: ROEHAMPTON

ANTENNA SCENARIO

11
 SECTION OF PHOTOS

Prepared (also subject responsible if other) Document:

ANDRE LEWIS
CALATEL
Doc respons/Approved Rev Date Reference
RLAM\ONOD\EPHIBEH 17-Feb- A
2022

Site Access Road Site Gate/Entrance

General Photo Tower/Monopole/Mast Full Tower View Photo Top to Ground level

Complete View of Structure (ALPHA) & Taken From Ground Level including TX Complete View of Structure (BETA) & Taken From Ground Level including TX
 SECTION OF PHOTOS

Prepared (also subject responsible if other) Document:

ANDRE LEWIS
CALATEL
Doc respons/Approved Rev Date Reference
RLAM\ONOD\EPHIBEH 17-Feb- A
2022
Complete View of Structure (GAMMA) & Taken From Ground Level including TX View Of Tower Plate

General Photo Tower Base from Far Photo of Each tower base detailed

RBS Cabinet ENVIROMENT (Showing Entire Plinth + RBS) RBS Cabinet Panoramic View ( Aerial )
 SECTION OF PHOTOS

Prepared (also subject responsible if other) Document:

ANDRE LEWIS
CALATEL
Doc respons/Approved Rev Date Reference
RLAM\ONOD\EPHIBEH 17-Feb- A
2022

Indoor Panoramic View RBS Cabinet(Close Door )

RBS Cabinet( Open Door) Away RBS Cabinet( Open Door) Near Detailed Inside

Status Bottom Plate RBS Evidence if the water entered in the cabinet 3G Digital Unit (DUXX, BB)
 SECTION OF PHOTOS

Prepared (also subject responsible if other) Document:

ANDRE LEWIS
CALATEL
Doc respons/Approved Rev Date Reference
RLAM\ONOD\EPHIBEH 17-Feb- A
2022

4G Digital Unit ( BBXX ) SIU / TCU

Router / Customer TX Equipment Overview Of 19" Rack TX

FULL view of PCU-AC PCU AC Model ( Close Up )

 SECTION OF PHOTOS

Prepared (also subject responsible if other) Document:

ANDRE LEWIS
CALATEL
Doc respons/Approved Rev Date Reference
RLAM\ONOD\EPHIBEH 17-Feb- A
2022

PCU AC Open Entry AC Connection Open BFU Connection Front

BFU Connection Back on the PCU AC Full view of 1st Power Subrack

PDU 1 - Power Subrack 1 PDU 2 - Power Subrack 1

 SECTION OF PHOTOS

Prepared (also subject responsible if other) Document:

ANDRE LEWIS
CALATEL
Doc respons/Approved Rev Date Reference
RLAM\ONOD\EPHIBEH 17-Feb- A
2022

PDU 3 - Power Subrack 1 PDU 4 - Power Subrack 1

Full view of 2nd Power Subrack PDU 1 - Power Subrack 2

PDU 2 - Power Subrack 2 PDU 3 - Power Subrack 2

 SECTION OF PHOTOS

Prepared (also subject responsible if other) Document:

ANDRE LEWIS
CALATEL
Doc respons/Approved Rev Date Reference
RLAM\ONOD\EPHIBEH 17-Feb- A
2022
PDU 4 - Power Subrack 2 PSU AC All - Power Subrack 1

PSU AC All - Power Subrack 2 SPD RRUs (Location 1 )

SPD RRUs (Location 2 ) SPD RRUs (Location 3 )

 SECTION OF PHOTOS

Prepared (also subject responsible if other) Document:

ANDRE LEWIS
CALATEL
Doc respons/Approved Rev Date Reference
RLAM\ONOD\EPHIBEH 17-Feb- A
2022

SHU( Location 1) SHU( Location 2 )

Roxtec or Shelter Entry Ports View from OUTSIDE Battery Bank ( Close Door)

Roxtec or Shelter Entry Ports View from OUTSIDE View Of Battery Label
 SECTION OF PHOTOS

Prepared (also subject responsible if other) Document:

ANDRE LEWIS
CALATEL
Doc respons/Approved Rev Date Reference
RLAM\ONOD\EPHIBEH 17-Feb- A
2022
Roxtec / Cable Entry Right Roxtec / Cable Entry Left

Battery Bank ( Close Door) Battery Bank ( Open Door )

AC Panel or Distribution Breakers ( Open ) AC Panel or Distribution Breakers ( Closed )

 SECTION OF PHOTOS

Prepared (also subject responsible if other) Document:

ANDRE LEWIS
CALATEL
Doc respons/Approved Rev Date Reference
RLAM\ONOD\EPHIBEH 17-Feb- A
2022

AC Panel Damage or Water if Apply AC Power Cable from Panel to RBS

AC Power Cable Conditions View Of Existing External Vertical Ladder or Monopole Entry

Motogenerator General Motogenerator Display

 SECTION OF PHOTOS

Prepared (also subject responsible if other) Document:

ANDRE LEWIS
CALATEL
Doc respons/Approved Rev Date Reference
RLAM\ONOD\EPHIBEH 17-Feb- A
2022
Street Power Counter Street Power Dist. Transformer

SPD Box ( Close ) SPD Box ( Open )

SPD Box Connection on Customer Rectifier Grounding Bar (MGB)

 SECTION OF PHOTOS

Prepared (also subject responsible if other) Document:

ANDRE LEWIS
CALATEL
Doc respons/Approved Rev Date Reference
RLAM\ONOD\EPHIBEH 17-Feb- A
2022

Grounding Bar (L.T.GB) Grounding Bar (M.T.GB)

Grounding Bar (T.T.GB) OIL and Power Cable Route 2 VERT

View Of Existing External Horizontal Ladder View Of Existing Internal Horizontal Ladder
 SECTION OF PHOTOS

Prepared (also subject responsible if other) Document:

ANDRE LEWIS
CALATEL
Doc respons/Approved Rev Date Reference
RLAM\ONOD\EPHIBEH 17-Feb- A
2022

View Of Existing External Vertical Ladder or Monopole Entry Vertical Ladder or Route Space for new Cable

General Issue Found On Site Requiring Customer Attention Proposal For New Equipment Installation

Equipment Power Wiring Route Proposed Equipment TX Wiring Router Proposed

 SECTION OF PHOTOS

Prepared (also subject responsible if other) Document:

ANDRE LEWIS
CALATEL
Doc respons/Approved Rev Date Reference
RLAM\ONOD\EPHIBEH 17-Feb- A
2022

TX Port Connection Proposed OIL/POWER/FEEDER cabling route proposal ( Check Space for Clamps )

Propósal, GPS system.( If Apply ) Proposal For New Equipment Installation

 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

SECTOR 1 60° (From Ground Up) SECTOR 2 60° (From Ground Up)

SECTOR 3 60° (From Ground Up) SECTOR 1 90° (From Ground Up)

SECTOR 2 90° (From Ground Up) SECTOR 3 90° (From Ground Up)
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A
Photo of Microwave Antennas Photo of Microwave Antennas

IF Cables for TX to the Antennas Tower Height

SECTOR 1 VIEW OF MAIN STRUCTURE SUPPORT from Below SECTOR 1 VIEW OF MAIN ANTENNA SUPPORTS from Behind
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

SECTOR 1 VIEW OF SUPPORTS FOR RRRU/RADIOS Behind SECTOR 1 GROUNDING BAR CONNECTION FOR RADIOS

SECTOR 2 VIEW OF MAIN STRUCTURE SUPPORT from Below SECTOR 2 VIEW OF MAIN ANTENNA SUPPORTS from Behind

SECTOR 2 VIEW OF SUPPORTS FOR RRRU/RADIOS Behind SECTOR 2 GROUNDING BAR CONNECTION FOR RADIOS
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

SECTOR 3 VIEW OF MAIN STRUCTURE SUPPORT from Below SECTOR 3 VIEW OF MAIN ANTENNA SUPPORTS from Behind

SECTOR 3 VIEW OF SUPPORTS FOR RRRU/RADIOS Behind SECTOR 3 GROUNDING BAR CONNECTION FOR RADIOS

TECHNOLOGY WCDMA 850:

SECTOR 1 WCDMA 850 RRU/RADIO INSTALLED SECTOR 1 WCDMA 850 RRU/RADIO PORTS
850 MHz 850 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

SECTOR 1 WCDMA 850 RADIO LABEL MODEL SECTOR 1 WCDMA 850 RADIO GROUNDING CONNECTION
850 MHz 850 MHz

XSECTOR 1 WCDMA 850 ANTENNAX SECTOR 1 WCDMA 850 ANTENNA PORTS

850 MHz 850 MHz

SECTOR 1 WCDMA 850 ANTENNA LABEL SECTOR 1 WCDMA 850 ANTENNA MECHANICAL TILT
850 MHz 850 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

SECTOR 1 WCDMA 850 ANTENNA ELECTRICAL TILT XSECTOR 1 WCDMA 850 -45° ANTENNA VIEW
850 MHz 850 MHz

SECTOR 1 WCDMA 850 ANTENNA LINE OF SIGHT SECTOR 1 WCDMA 850 +45° ANTENNA VIEW
850 MHz 850 MHz

SECTOR 2 WCDMA 850 RRU/RADIO INSTALLED SECTOR 2 WCDMA 850 RRU/RADIO PORTS
850 MHz 850 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

SECTOR 2 WCDMA 850 RADIO LABEL MODEL SECTOR 2 WCDMA 850 RADIO GROUNDING CONNECTION
850 MHz 850 MHz

SECTOR 2 WCDMA 850 ANTENNA SECTOR 2 WCDMA 850 ANTENNA PORTS

850 MHz 850 MHz

SECTOR 2 WCDMA 850 ANTENNA LABEL SECTOR 2 WCDMA 850 ANTENNA MECHANICAL TILT
850 MHz 850 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

SECTOR 2 WCDMA 850 ANTENNA ELECTRICAL TILT SECTOR 2 WCDMA 850 -45° ANTENNA VIEW
850 MHz 850 MHz

SECTOR 2 WCDMA 850 ANTENNA LINE OF SIGHT SECTOR 2 WCDMA 850 +45° ANTENNA VIEW
850 MHz 850 MHz

SECTOR 3 WCDMA 850 RRU/RADIO INSTALLED SECTOR 3 WCDMA 850 RRU/RADIO PORTS
850 MHz 850 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

SECTOR 3 WCDMA 850 RADIO LABEL MODEL SECTOR 3 WCDMA 850 RADIO GROUNDING CONNECTION
850 MHz 850 MHz

SECTOR 3 WCDMA 850 ANTENNA SECTOR 3 WCDMA 850 ANTENNA PORTS

850 MHz 850 MHz

SECTOR 3 WCDMA 850 ANTENNA LABEL SECTOR 3 WCDMA 850 ANTENNA MECHANICAL TILT
850 MHz 850 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

SECTOR 3 WCDMA 850 ANTENNA ELECTRICAL TILT SECTOR 3 WCDMA 850 -45° ANTENNA VIEW
850 MHz 850 MHz

SECTOR 3 WCDMA 850 ANTENNA LINE OF SIGHT SECTOR 3 WCDMA 850 +45° ANTENNA VIEW
850 MHz 850 MHz

SECTOR 1 ANTENNA HEIGHT WITH THE LASER TOOL SECTOR 2 ANTENNA HEIGHT WITH THE LASER TOOL
850 MHz 850 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

SECTOR 3 ANTENNA HEIGHT WITH THE LASER TOOL

850 MHz

TECHNOLOGY WCDMA 1900:

SECTOR 1 WCDMA 1900 RRU/RADIO INSTALLED SECTOR 1 WCDMA 1900 RRU/RADIO PORTS
1900 MHz 1900 MHz

SECTOR 1 WCDMA 1900 RADIO LABEL MODEL SECTOR 1 WCDMA 1900 RADIO GROUNDING CONNECTION
1900 MHz 1900 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

XSECTOR 1 WCDMA 1900 ANTENNAX SECTOR 1 WCDMA 1900 ANTENNA PORTS

1900 MHz 1900 MHz

SECTOR 1 WCDMA 1900 ANTENNA LABEL SECTOR 1 WCDMA 1900 ANTENNA MECHANICAL TILT
1900 MHz 1900 MHz

SECTOR 1 WCDMA 1900 ANTENNA ELECTRICAL TILT XSECTOR 1 WCDMA 1900 -45° ANTENNA VIEW
1900 MHz 1900 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

SECTOR 1 WCDMA 1900 ANTENNA LINE OF SIGHT SECTOR 1 WCDMA 1900 +45° ANTENNA VIEW
1900 MHz 1900 MHz

SECTOR 2 WCDMA 1900 RRU/RADIO INSTALLED SECTOR 2 WCDMA 1900 RRU/RADIO PORTS
1900 MHz 1900 MHz

SECTOR 2 WCDMA 1900 RADIO LABEL MODEL SECTOR 2 WCDMA 1900 RADIO GROUNDING CONNECTION
1900 MHz 1900 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

SECTOR 2 WCDMA 1900 ANTENNA SECTOR 2 WCDMA 1900 ANTENNA PORTS

1900 MHz 1900 MHz

SECTOR 2 WCDMA 1900 ANTENNA LABEL SECTOR 2 WCDMA 1900 ANTENNA MECHANICAL TILT
1900 MHz 1900 MHz

SECTOR 2 WCDMA 1900 ANTENNA ELECTRICAL TILT SECTOR 2 WCDMA 1900 -45° ANTENNA VIEW
1900 MHz 1900 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

SECTOR 2 WCDMA 1900 ANTENNA LINE OF SIGHT SECTOR 2 WCDMA 1900 +45° ANTENNA VIEW
1900 MHz 1900 MHz

SECTOR 3 WCDMA 1900 RRU/RADIO INSTALLED SECTOR 3 WCDMA 1900 RRU/RADIO PORTS
1900 MHz 1900 MHz

SECTOR 3 WCDMA 1900 RADIO LABEL MODEL SECTOR 3 WCDMA 1900 RADIO GROUNDING CONNECTION
1900 MHz 1900 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

SECTOR 3 WCDMA 1900 ANTENNA SECTOR 3 WCDMA 1900 ANTENNA PORTS

1900 MHz 1900 MHz

SECTOR 3 WCDMA 1900 ANTENNA LABEL SECTOR 3 WCDMA 1900 ANTENNA MECHANICAL TILT
1900 MHz 1900 MHz

SECTOR 3 WCDMA 1900 ANTENNA ELECTRICAL TILT SECTOR 3 WCDMA 1900 -45° ANTENNA VIEW
1900 MHz 1900 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

SECTOR 3 WCDMA 1900 ANTENNA LINE OF SIGHT SECTOR 3 WCDMA 1900 +45° ANTENNA VIEW
1900 MHz 1900 MHz

SECTOR 1 ANTENNA HEIGHT WITH THE LASER TOOL SECTOR 2 ANTENNA HEIGHT WITH THE LASER TOOL
850 MHz 850 MHz

SECTOR 3 ANTENNA HEIGHT WITH THE LASER TOOL

850 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A
TECHNOLOGY LTE 700:

SECTOR 1 LTE 700 RRU/RADIO INSTALLED SECTOR 1 LTE 700 RRU/RADIO PORTS
LTE 700 MHz LTE 700 MHz

SECTOR 1 LTE 700 RADIO LABEL MODEL SECTOR 1 LTE 700 RADIO GROUNDING CONNECTION
LTE 700 MHz LTE 700 MHz

XSECTOR 1 LTE 700 ANTENNAX SECTOR 1 LTE 700 ANTENNA PORTS

LTE 700 MHz LTE 700 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A
SECTOR 1 LTE 700 ANTENNA LABEL SECTOR 1 LTE 700 ANTENNA MECHANICAL TILT
LTE 700 MHz LTE 700 MHz

SECTOR 1 LTE 700 ANTENNA ELECTRICAL TILT XSECTOR 1 LTE 700 -45° ANTENNA VIEW
LTE 700 MHz LTE 700 MHz

SECTOR 1 LTE 700 ANTENNA LINE OF SIGHT SECTOR 1 LTE 700 +45° ANTENNA VIEW
LTE 700 MHz LTE 700 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A
SECTOR 2 LTE 700 RRU/RADIO INSTALLED SECTOR 2 LTE 700 RRU/RADIO PORTS
LTE 700 MHz LTE 700 MHz

SECTOR 2 LTE 700 RADIO LABEL MODEL SECTOR 2 LTE 700 RADIO GROUNDING CONNECTION
LTE 700 MHz LTE 700 MHz

SECTOR 2 LTE 700 ANTENNA SECTOR 2 LTE 700 ANTENNA PORTS

LTE 700 MHz LTE 700 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A
SECTOR 2 LTE 700 ANTENNA LABEL SECTOR 2 LTE 700 ANTENNA MECHANICAL TILT
LTE 700 MHz LTE 700 MHz

SECTOR 2 LTE 700 ANTENNA ELECTRICAL TILT SECTOR 2 LTE 700 -45° ANTENNA VIEW
LTE 700 MHz LTE 700 MHz

SECTOR 2 LTE 700 ANTENNA LINE OF SIGHT SECTOR 2 LTE 700 +45° ANTENNA VIEW
LTE 700 MHz LTE 700 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A
SECTOR 3 LTE 700 RRU/RADIO INSTALLED SECTOR 3 LTE 700 RRU/RADIO PORTS
LTE 700 MHz LTE 700 MHz

SECTOR 3 LTE 700 RADIO LABEL MODEL SECTOR 3 LTE 700 RADIO GROUNDING CONNECTION
LTE 700 MHz LTE 700 MHz

SECTOR 3 LTE 700 ANTENNA SECTOR 3 LTE 700 ANTENNA PORTS

LTE 700 MHz LTE 700 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A
SECTOR 3 LTE 700 ANTENNA LABEL SECTOR 3 LTE 700 ANTENNA MECHANICAL TILT
LTE 700 MHz LTE 700 MHz

SECTOR 3 LTE 700 ANTENNA ELECTRICAL TILT SECTOR 3 LTE 700 -45° ANTENNA VIEW
LTE 700 MHz LTE 700 MHz

SECTOR 3 LTE 700 ANTENNA LINE OF SIGHT SECTOR 3 LTE 700 +45° ANTENNA VIEW
LTE 700 MHz LTE 700 MHz
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A
SECTOR 1 ANTENNA HEIGHT WITH THE LASER TOOL SECTOR 2 ANTENNA HEIGHT WITH THE LASER TOOL
LTE 700 MHz LTE 700 MHz

SECTOR 3 ANTENNA HEIGHT WITH THE LASER TOOL

LTE 700 MHz

TOWER SURGE ARRESTER VIEW TOWER LIGHTENING ARRESTER VIEW

 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

Sector A Proposed Proposed Location For Panel Antenna Installation Sector B Proposed Proposed Location For Panel Antenna Installation

Swap old LTE 700MHz Swap old LTE 700MHz

for new Antenna 6P for new Antenna 6P
MOD. 84510866 LTE MOD. 84510866 LTE
700/2100MHz. 700/2100MHz.
Install New Radio 4499 Install New Radio 4499
B2 B25 B66A for LTE B2 B25 B66A for LTE
2100MHz 2100MHz S2 AND S3
Reconect existing radio Reconect existing radio
11 B12 for LTE 700MHz 11 B12 for LTE 700MHz

Sector C Proposed Proposed Location For Panel Antenna Installation Sector A Proposed Proposed Location For Radios Installation

Swap old LTE 700MHz

for new Antenna 6P
MOD. 84510866 LTE
700/2100MHz.
Share radio S2 for LTE
2100MHz
Reconect existing radio Install new radio
11 B12 for LTE 700MHz 4499 B2 B25 B66A in
pipe existing

Sector B Proposed Proposed Location For Radios Installation Sector C Proposed Proposed Location For Radios Installation

Install new radio 4499 B2

B25 B66A in pipe existing
Share radio S2 and S3
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A
ADITIONAL PHOTOS

Aditional Photo #1 Aditional Photo #2

Swap old LTE 700MHz Swap old LTE 700MHz

for new Antenna 6P for new Antenna 6P
MOD. 84510866 LTE MOD. 84510866 LTE
700/2100MHz. 700/2100MHz.
Install New Radio 4499 Install New Radio 4499
B2 B25 B66A for LTE B2 B25 B66A for LTE
2100MHz 2100MHz S2 AND S3
Reconect existing radio Reconect existing radio
11 B12 for LTE 700MHz 11 B12 for LTE 700MHz

Aditional Photo #3 Aditional Photo #4

Swap old LTE 700MHz

for new Antenna 6P
MOD. 84510866 LTE
700/2100MHz.
Share radio S2 for LTE
2100MHz
Reconect existing radio
11 B12 for LTE 700MHz

Aditional Photo #5 Aditional Photo #6

 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOW ER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

Aditional Photo #7 Aditional Photo #8

Aditional Photo #9 Aditional Photo #10

 Structure Assessment
Prepared by (also responsible) Document No.

CALATEL ANDRE LEWIS SIR GROUNDJSJ046RoehamptonJAMAICA

Responsible / Approved: Checked Date Rev. Created by:
RLAM\ONOD\EPHIBEH ERICSSON 17-Feb-2022 A

1) Site Conditions (based on visual perspective)

1- AC Panel presents any issue or visible damage? Yes ☐ No ☑ N/A

Comments:

2- Grounding system presents any visible damage? Yes ☐ No ☑ N/A

Comments:

3- Site fences need to be repaired? Yes ☐ No ☑ N/A

Comments:

4- Tower/Structure presents any damage or need repair (corrosion, not stable, etc.)? Yes ☐ No ☑ N/A
Comments:

5- Is there any condition which prevents completion of Site Survey on this structure? Yes ☐ No ☑ N/A
If Yes, provide detail:

6- Is there any condition which prevents installation activity on this structure? Yes ☐ No ☑ N/A
If Yes, provide detail:

2) Antenna pipes, frames and mounts (based on visual perspective)

1- Antenna pipes present any corrosion? Yes ☐ No ☑ Sector:

2- Frames present any corrosion (including Ubolts, screws, etc)? Yes ☐ No ☑ Sector:

3- Frame mounts present any corrosion (including Ubolts, screws, etc)? Yes ☐ No ☑ Sector:

4- Is there any loose section or item? Yes ☐ No ☑ Sector:

5- Is antenna pipe welded to a mount? Yes ☐ No ☑ Sector:

6- Antenna pipe welds require maintenance? Yes ☐ No ☑ Sector:

7- Frame welds require maintenance? Yes ☐ No ☑ Sector:

8- Mount welds require maintenance? Yes ☐ No ☑ Sector:

9- Antenna pipe presents any visual damage? Yes ☐ No ☑ Sector:

10- Frame presents any visual damage (fame visually tilted, broken piece, etc)? Yes ☐ No ☑ Sector:

11- Mounts presents any visual damage (mount twisted or broken, etc)? Yes ☐ No ☑ Sector:

12- Frame or mounts feel unstable? Yes ☐ No ☑ Sector:

13- Pipe, frame or mounts require reinforcement Yes ☐ No ☑ Sector:

14- Is recommended to replace antenna pipe? Yes ☐ No ☑ Sector:

15- Is recommended to replace frame? Yes ☐ No ☑ Sector:

16- Is recommended to replace mounts? Yes ☐ No ☑ Sector:

17- Is any existing antenna going to be reused? Yes ☐ No ☑ Sector:

18- Antenna down-tilt brackets or clamps presents any damage or corrosion? Yes ☐ No ☑ Sector:

19- Antenna bracket bolts presents any damage or corrosion? Yes ☐ No ☑ Sector:
Please provide the following pictures to review antenna frames and mounts conditions (highlight any relevant detail):
 Structure Assessment
Prepared by (also responsible) Document No.

CALATEL ANDRE LEWIS SIR GROUNDJSJ046RoehamptonJAMAICA

Responsible / Approved: Checked Date Rev. Created by:
RLAM\ONOD\EPHIBEH ERICSSON 17-Feb-2022 A
SECTOR 1

Antenna Frame Frame or Pipe Mounts Condition of Frames/Mounts

SECTOR 2

Antenna Frame Frame or Pipe Mounts Condition of Frames/Mounts

SECTOR 3

Antenna Frame Frame or Pipe Mounts Condition of Frames/Mounts

Additional comments:

Existing

**Note: Captured details of structures, pipes, frames and mounts are from a visual perspective. For more accurate results and to
know their exact conditions it is recommended to perform an structural analysis.
 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOWER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A

*THE PANORAMIC PHOTOS WERE TAKEN AT THE HEIGHT OF THE TOWER (H:45.0M)

0 DEG 30 DEG

60 DEG 90 DEG

120 DEG 150 DEG

 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOWER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A
180 DEG 210 DEG

240 DEG 270 DEG

300 DEG 330 DEG

 SITE INVESTIGATION REPORT
Preparado por (también responsible si otro) - Prepared (also subject responsible if other) Document:

CALATEL ANDRE LEWIS SIR TOWER JSJ046

Responsible / Aprobado - Doc response/Approved Revisado - Checked Date Rev. Archive - File
RLAM\ONOD\EPHIBEH 17-Feb-2022 A
360 DEG
 Ericsson Antenna Technology Germany GmbH • Klepperstraße 26 • 83026 Rosenheim • Germany

Kathrein Mobile
Ericsson Antenna Technology
Germany GmbH
Klepperstraße 26
83026 Rosenheim
Germany

Communication
Phone: +49 8031 184-0
Fax: +49 8031 184-306
www.kathrein.com

– now part of
Company Responsible:
Markus Feld

Ericsson
VAT Reg. No.: DE 324 954 029
Tax ID No.: 103/5725/3930

BNP Paribas
IBAN: NL05 BNPA 0227 7141 56
BIC: BNPANL2AXXX
Zum 1. Oktober 2019 ist die Kathrein Mobile Communication die Ericsson Antenna Technology
Germany GmbH (im Folgenden auch „EAG“), eine mit Gesellschaftsvertrag vom 16. Januar
2019 neu gegründete Gesellschaft mit beschränkter Haftung (GmbH) nach deutschem Recht
mit Sitz in Rosenheim (Geschäftsanschrift: Prinzenallee 21, 40549 Düsseldorf). EAG ist im
Handelsregister B des Amtsgerichts Traunstein unter der Nr. HRB 27988 eingetragen und hat
ein Stammkapital von derzeit EUR 2.000.000,00. EAG wird vertreten durch den Geschäftsführer
Markus Feld. Alleinige Gesellschafterin von EAG ist die Telefonaktiebolaget LM Ericsson (publ),
eine börsennotierte Aktiengesellschaft nach schwedischem Recht.

Die neuen Firmendaten lauten seither wie folgt:

Ericsson Antenna Technology Germany GmbH
Klepperstraße 26
83026 Rosenheim, Germany
UST-Ident-Nr: DE 324 954 029
Steuer-Nr.: 103/5725/3930

As of 1 October 2019, Kathrein Mobile Communication is Ericsson Antenna Technology

Germany GmbH (hereinafter also referred to as “EAG”), a limited liability company under
German law, newly established by articles of association dated 16 January 2019, with its
head office in Rosenheim (business address: Prinzenallee 21, 40549 Düsseldorf, Germany).
EAG is registered in the commercial register, section B, of Amtsgericht Traunstein (district court
Traunstein) under the number HRB 27988 and has a share capital of currently EUR 2,000,000.
EAG is represented by managing director Markus Feld. The sole shareholder of EAG is
9360000644

Telefonaktiebolaget LM Ericsson (publ), a listed stock corporation under Swedish law.

The new company data are as follows:

Ericsson Antenna Technology Germany GmbH
Klepperstraße 26
83026 Rosenheim, Germany
VAT Reg. No.: DE 324 954 029
Tax ID No.: 103/5725/3930

Read more at: ericsson.com/en/networks/kathrein

 6-Port Antenna R1 Y1 Y2
Frequency Range 698–960 1695–2690 1695–2690
Dual Polarization X X X
HPBW 65° 65° 65°
Gain 16.5dBi 18dBi 18dBi
Adjust. Electr. DT 1°–10° 2°–12° 2°–12°
set by integrated RET

6-Port Antenna LB/2HB 2.7m 65° | 698–960 16.5dBi | 2x1695–2690 18dBi

Type No. 84510866
Center, lowband R1, connector 1 – 2
698 – 960
Frequency Range MHz 698 – 806 790 – 862 824 – 894 880 – 960
Gain at mid Tilt dBi 16.2 16.5 16.6 16.8
Gain over all Tilts dBi 16.1 ± 0.6 16.5 ± 0.5 16.5 ± 0.5 16.7 ± 0.6
Horizontal Pattern:
Azimuth Beamwidth ° 69 ± 2.0 66 ± 1.8 65 ± 2.3 63 ± 2.3
Front-to-Back Ratio,
dB > 27 > 28 > 28 > 28
Total Power, ± 30°
Vertical Pattern:
Elevation Beamwidth ° 8.3 ± 0.7 7.6 ± 0.3 7.4 ± 0.4 7.0 ± 0.3
Electrical Downtilt
° 1.0 – 10.0
continuously adjustable
Tilt Accuracy ° < 0.7 < 0.8 < 0.7 < 0.7
First Upper Side Lobe
dB > 16 > 16 > 17 > 18
­Suppression
Cross Polar Isolation dB > 28
Port to Port Isolation dB > 28 dB (R1 // Y1, Y2)
Max. Effective Power W 200 (at 40 °C ambient temperature)
per Port
Max. Effective Power W 400 (at 40 °C ambient temperature)
Ports R1
Values based on NGMN-P-BASTA (version 10.0) requirements.
936.0000613b | ngmn 04.32.02.01 | Subject to alteration.

84510866 Page 1 of 4
Ericsson Antenna Technology Germany GmbH | Klepperstraße 26 | 83026 Rosenheim, Germany | +49 8031 184-0 | www.kathrein.com | [email protected]
6-Port Antenna

Left side, highband Y1, connector 3 – 4

1695–2690
Frequency Range MHz 1695 – 1880 1850 – 1990 1920 – 2180 2300 – 2400 2500 – 2690
Gain at mid Tilt dBi 17.1 17.4 17.7 17.7 17.9
Gain over all Tilts dBi 17.0 ± 0.7 17.4 ± 0.6 17.6 ± 0.9 17.5 ± 0.8 17.8 ± 0.8
Horizontal Pattern:
Azimuth Beamwidth ° 62 ± 4.7 60 ± 2.8 59 ± 3.4 62 ± 3.2 61 ± 3.5
Front-to-Back Ratio,
dB > 25 > 26 > 26 > 25 > 25
Total Power, ± 30°
Vertical Pattern:
Elevation Beamwidth ° 6.9 ± 0.6 6.4 ± 0.3 6.1 ± 0.4 5.4 ± 0.2 4.8 ± 0.3
Electrical Downtilt
° 2.0 – 12.0
continuously adjustable
Tilt Accuracy ° < 0.4 < 0.4 < 0.4 < 0.3 < 0.4
First Upper Side Lobe
dB > 17 > 19 > 20 > 16 > 17
­Suppression
Cross Polar Isolation dB > 28
Port to Port Isolation dB > 28 dB (Y1 // R1, Y2)
Max. Effective Power W 175 (at 40 °C ambient temperature)
per Port
Max. Effective Power W 300 (at 40 °C ambient temperature)
Ports Y1
Values based on NGMN-P-BASTA (version 10.0) requirements.

Right side, highband Y2, connector 5 – 6

1695–2690
Frequency Range MHz 1695 – 1880 1850 – 1990 1920 – 2180 2300 – 2400 2500 – 2690
Gain at mid Tilt dBi 17.3 17.6 17.8 17.7 17.9
Gain over all Tilts dBi 17.2 ± 0.7 17.5 ± 0.7 17.7 ± 0.9 17.5 ± 0.8 17.8 ± 1.0
Horizontal Pattern:
Azimuth Beamwidth ° 61 ± 4.9 60 ± 3.1 58 ± 4.1 62 ± 2.3 61 ± 4.2
Front-to-Back Ratio,
dB > 24 > 25 > 24 > 26 > 24
Total Power, ± 30°
Vertical Pattern: 936.0000613b | ngmn 04.32.02.01 | Subject to alteration.
Elevation Beamwidth ° 6.9 ± 0.6 6.4 ± 0.3 6.2 ± 0.5 5.4 ± 0.3 4.9 ± 0.3
Electrical Downtilt
° 2.0 – 12.0
continuously adjustable
Tilt Accuracy ° < 0.5 < 0.4 < 0.4 < 0.4 < 0.4
First Upper Side Lobe
dB > 16 > 17 > 17 > 16 > 15
­Suppression
Cross Polar Isolation dB > 28
Port to Port Isolation dB > 28 dB (Y2 // R1, Y1)
Max. Effective Power W 175 (at 40 °C ambient temperature)
per Port
Max. Effective Power W 300 (at 40 °C ambient temperature)
Ports Y2
Values based on NGMN-P-BASTA (version 10.0) requirements.

Page 2 of 4 84510866
Ericsson Antenna Technology Germany GmbH | Klepperstraße 26 | 83026 Rosenheim, Germany | +49 8031 184-0 | www.kathrein.com | [email protected]
 6-Port Antenna

Electrical specifications, all ports Mechanical specifications

Impedance Ω 50 Input 6 x 4.3-10 female
VSWR < 1.5 Connector Position bottom
Return Loss dB > 14 Adjustment Mechanism Integrated RET,
Interband Isolation dB > 28 continuously adjustable
Passive Intermodulation dBc < −150 (2 x 43 dBm carrier) Wind load (at Rated N | lbf Frontal: 1230 | 276
Polarization ° −45, +45 Wind Speed: 150 km/h) Maximal: 1230 | 276
Max. Effective Power 700 (at 40 °C ambient Max. Wind Velocity km/h 200
W ­temperature) mph 124
for the Antenna
Values based on NGMN-P-BASTA (version 10.0) requirements. Height / Width / Depth mm 2697 / 353 / 164
inches 106.2 / 13.9 / 6.5
Category of
H (Heavy)
Mounting ­Hardware
Weight kg 32.0 / 33.5 (clamps incl.)
lb 70.5 / 73.8 (clamps incl.)
Packing Size mm 2910 / 377 / 210
inches 114.6 / 14.8 / 8.3
Scope of Supply Panel, integrated RET and
2 units of clamps
for 55–115 mm |
2.2–4.5 inches diameter

Accessories (order separately if required) 1) ∅ 9 | 0.4

2) 2) 72 | 2.8
Remarks Weight Units per 3) 13 | 0.5

3)
Type No. Description 1)
mm | inches approx. kg | lb antenna

85010002 1 clamp Mast diameter: 110–220 | 4.3–8.7 2.7 | 6.0 2

85010003 1 clamp Mast diameter: 210–380 | 8.3–15.0 4.8 | 10.6 2
85010008 1 downtilt kit Downtilt angle: 0°–8° 4.3 | 9.5 1
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Wall mounting: No additional mounting kit needed.

Material: Reflector screen: Aluminum.

Fiberglass housing: It covers totally the internal antenna ­components. The special
design reduces the sealing areas to a minimum and ­guarantees the best weather
p­ rotection. Fiberglass material guarantees optimum p ­ erformance with regards to
­stability, stiffness, UV resistance and painting. The color of the radome is light grey.

2768 | 109.0
2697 | 106.2
2728 | 107.4
All nuts and bolts: Stainless steel or hot-dip galvanized steel.

Grounding: The metal parts of the antenna including the mounting kit and the inner conductors are
DC grounded.
936.0000613b | ngmn 04.32.02.01 | Subject to alteration.

All dimensions
in mm | inches

84510866 Page 3 of 4
Ericsson Antenna Technology Germany GmbH | Klepperstraße 26 | 83026 Rosenheim, Germany | +49 8031 184-0 | www.kathrein.com | [email protected]
 6-Port Antenna

Layout of interface:
353 | 13.9 *
262 | 10.3
150 | 5.9
50 | 2.0

164 | 6.5 *
190 | 7.5 *
40 | 1.6
78 | 3.1

Bottom view
* Dimensions refer to radome
All dimensions in mm | inches

353 | 13.9 *
290 | 11.4
214 | 8.4
170 | 6.7
60 | 2.4

Correlation Table
936.0000613b | ngmn 04.32.02.01 | Subject to alteration.
Frequency range Array Connector / Ports
164 | 6.5 *

698–960 MHz R1 1–2

1695–2690 MHz Y1 3–4
190 | 7.5 *

1695–2690 MHz Y2 5–6

149.7 | 5.9
140.5 | 5.5
119.6 | 4.7

Y1 R1 Y2
Left Center Right

Bottom view
* Dimensions refer to radome
All dimensions in mm | inches

Page 4 of 4 84510866 Any previous data sheet issues have now become ­invalid.
Ericsson Antenna Technology Germany GmbH | Klepperstraße 26 | 83026 Rosenheim, Germany | +49 8031 184-0 | www.kathrein.com | [email protected]
Radio Description
Radio 4499

Description

Ge19047A

245/1551-LZA 701 6001/1 Uen AE

 Radio Description

3 Technical Data

Table 2 Radio 4499 Technical Data

Description Value
Maximum nominal output power(1)(2) (3) Radio 4499 44B0A 44B28 C
(Hardware Activation Codes (HWAC) are required for total output B0A: 60 W per port
power over 20 W.) B28: 40 W per port
Total: 80 W per port
Radio 4499 44B1 44B3 C
60 W per port and band
Total: 80 W per port
Radio 4499 44B1 44B7 C
B1: 60 W per port
B7: 40 W per port
Total: 80 W per port
Radio 4499 44B2/B25 44B66A C
60 W per port and band
Total: 80 W per port
Radio 4499 44B5 44B28 C
B5: 60 W per port
B28: 40 W per port
Total: 80 W per port
Radio 4499 44B8 44B28 C
B8: 60 W per port
B28: 40 W per port
Total: 80 W per port
Minimum configurable output power on an RF port 10 W (5 W per band)
Number of carriers(4) Radio 4499 44B0A 44B28 C
Maximum 6 carriers per band and port
Total 12 carriers over both bands and per port
B0A:
LTE: 6 downlink per port, 6 uplink per port
NR: 4 downlink per port, 4 uplink per port
ESS: 2 downlink per port, 2 uplink per port
WCDMA: 5 downlink per port, 5 uplink per port
GSM:

— Single mode GSM — 2 downlink per port, 6 uplink per

port

— Mixed mode GSM — 4 downlink per port, 6 uplink per

port

NB-IoT standalone mode: 2 downlink per port, 6 uplink per port

NB-IoT in-band mode: 1 NB-IoT carrier per configured LTE host
carrier
NB-IoT guard band mode: 1 NB-IoT carrier per configured LTE
host carrier
B28:
LTE: 6 downlink per port, 6 uplink per port
NR: 4 downlink per port, 4 uplink per port
ESS: 4 downlink per port, 4 uplink per port
NB-IoT standalone mode: 2 downlink per port, 6 uplink per port
NB-IoT in-band mode: 1 NB-IoT carrier per configured LTE host
carrier
NB-IoT guard band mode: 1 NB-IoT carrier per configured LTE
host carrier
Radio 4499 44B1 44B3 C
Maximum 6 carriers per band and port

4 245/1551-LZA 701 6001/1 Uen AE | 2021-02-09

 Technical Data

Description Value
Total 12 carriers over both bands and per port
B1:
LTE: 6 downlink per port, 6 uplink per port
NR: 4 downlink per port, 4 uplink per port
ESS: 4 downlink per port, 4 uplink per port
WCDMA: 6 downlink per port, 6 uplink per port
NB-IoT standalone mode: 2 downlink per port, 6 uplink per port
NB-IoT in-band mode: 1 NB-IoT carrier per configured LTE host
carrier
NB-IoT guard band mode: 1 NB-IoT carrier per configured LTE
host carrier
B3:
GSM: 4 downlink per port, 5 uplink per port
LTE: 6 downlink per port, 6 uplink per port
NR: 4 downlink per port, 4 uplink per port
ESS: 4 downlink per port, 4 uplink per port
NB-IoT standalone mode: 2 downlink per port, 6 uplink per port
NB-IoT in-band mode: 1 NB-IoT carrier per configured LTE host
carrier
NB-IoT guard band mode: 1 NB-IoT carrier per configured LTE
host carrier
Radio 4499 44B1 44B7 C
Maximum 6 carriers per band and port
Total 12 carriers over both bands and per port
B1:
LTE : 6 downlink per port, 6 uplink per port
NR : 4 downlink per port, 4 uplink per port
ESS: 4 downlink per port, 4 uplink per port
WCDMA: 6 downlink per port, 6 uplink per port
NB-IoT standalone mode: 2 downlink per port, 6 uplink per port
NB-IoT in-band mode: 1 NB-IoT carrier per configured LTE host
carrier
NB-IoT guard band mode: 1 NB-IoT carrier per configured LTE
host carrier
B7:
LTE: 6 downlink per port, 6 uplink per port
NR : 4 downlink per port, 4 uplink per port
ESS: 4 downlink per port, 4 uplink per port
NB-IoT standalone mode: 2 downlink per port, 6 uplink per port
NB-IoT in-band mode: 1 NB-IoT carrier per configured LTE host
carrier
NB-IoT guard band mode: 1 NB-IoT carrier per configured LTE
host carrier
Radio 4499 44B2/B25 44B66A C
Maximum 6 carriers per band and port
Total 12 carriers over the bands and per port
B2:
GSM: 4 downlink per port, 6 uplink per port
WCDMA: 6 downlink per port, 6 uplink per port
LTE: 6 downlink per port, 6 uplink per port
NR: 4 downlink per port, 4 uplink per port
ESS: 4 downlink per port, 4 uplink per port
NB-IoT standalone mode: 2 downlink per port, 6 uplink per port
NB-IoT in-band mode: 1 NB-IoT carrier per configured LTE host
carrier
NB-IoT guard band mode: 1 NB-IoT carrier per configured LTE
host carrier
B25:
WCDMA: 6 downlink per port, 6 uplink per port
LTE: 6 downlink per port, 6 uplink per port
NR: 4 downlink per port, 4 uplink per port
ESS: 4 downlink per port, 4 uplink per port
NB-IoT standalone mode: 2 downlink per port, 6 uplink per port
NB-IoT in-band mode: 1 NB-IoT carrier per configured LTE host
carrier
NB-IoT guard band mode: 1 NB-IoT carrier per configured LTE
host carrier
B66A:
WCDMA: 6 downlink per port, 6 uplink per port

245/1551-LZA 701 6001/1 Uen AE | 2021-02-09 5

 Radio Description

Description Value
LTE: 6 downlink per port, 6 uplink per port
NR: 4 downlink per port, 4 uplink per port
ESS: 4 downlink per port, 4 uplink per port
NB-IoT standalone mode: 2 downlink per port, 6 uplink per port
NB-IoT in-band mode: 1 NB-IoT carrier per configured LTE host
carrier
NB-IoT guard band mode: 1 NB-IoT carrier per configured LTE
host carrier
Radio 4499 44B5 44B28 C
Maximum 6 carriers per band and port
Total 12 carriers over both bands and per port
B5:
LTE: 6 downlink per port, 6 uplink per port
NR: 4 downlink per port, 4 uplink per port
ESS: 2 downlink per port, 2 uplink per port
WCDMA: 5 downlink per port, 5 uplink per port
GSM:

— Single mode GSM — 3 downlink per port, 5 uplink per

— Mixed mode GSM — 4 downlink per port, 5 uplink per

NB-IoT standalone mode: 2 downlink per port, 6 uplink per port

NB-IoT in-band mode: 1 NB-IoT carrier per configured LTE host
carrier
NB-IoT guard band mode: 1 NB-IoT carrier per configured LTE
host carrier
B28:
LTE: 6 downlink per port, 6 uplink per port.
NR: 4 downlink per port, 4 uplink per port
ESS: 4 downlink per port, 4 uplink per port
NB-IoT standalone mode: 2 downlink per port, 6 uplink per port
NB-IoT in-band mode: 1 NB-IoT carrier per configured LTE host
carrier
NB-IoT guard band mode: 1 NB-IoT carrier per configured LTE
host carrier
Radio 4499 44B8 44B28 C
Maximum 6 carriers per band and port
Total 12 carriers over both bands and per port
B8:
LTE: 6 downlink per port, 6 uplink per port
NR: 4 downlink per port, 4 uplink per port
ESS: 3 downlink per port, 3 uplink per port
WCDMA: 6 downlink per port, 6 uplink per port
GSM:

— Single mode GSM — 2 downlink per port, 6 uplink per

port

— Mixed mode GSM — 4 downlink per port, 6 uplink per

port

NB-IoT standalone mode: 2 downlink per port, 6 uplink per port

NB-IoT in-band mode: 1 NB-IoT carrier per configured LTE host
carrier
NB-IoT guard band mode: 1 NB-IoT carrier per configured LTE
host carrier
B28:
LTE: 6 downlink per port, 6 uplink per port.
NR: 4 downlink per port, 4 uplink per port
ESS: 4 downlink per port, 4 uplink per port
NB-IoT standalone mode: 2 downlink per port, 6 uplink per port
NB-IoT in-band mode: 1 NB-IoT carrier per configured LTE host
carrier
NB-IoT guard band mode: 1 NB-IoT carrier per configured LTE
host carrier
Frequency(5) B0A for NR, LTE, ESS, WCDMA, GSM, NB-IoT in-band mode, NB-
IoT standalone mode, and NB-IoT guard band mode
890–915 MHz uplink

6 245/1551-LZA 701 6001/1 Uen AE | 2021-02-09

 Technical Data

Description Value
935–960 MHz downlink
B1 for NR, ESS, LTE, WCDMA, NB-IoT in-band mode, NB-IoT
standalone mode, and NB-IoT guard band mode
1920–1980 MHz uplink
2110–2170 MHz downlink
B2 for NR, ESS, GSM(6), WCDMA, LTE, NB-IoT in-band mode,
NB-IoT standalone mode, and NB-IoT guard band mode
1850–1910 MHz uplink
1930–1990 MHz downlink

B3 for NR, ESS, LTE, GSM(6), NB-IoT in-band mode, NB-IoT

standalone mode, and NB-IoT guard band mode
1710–1785 MHz uplink
1805–1880 MHz downlink
B5 for NR, LTE, ESS, WCDMA, GSM, NB-IoT in-band mode, NB-
IoT standalone mode, and NB-IoT guard band mode
824–849 MHz uplink
869–894 MHz downlink
B7 for NR, ESS, LTE, NB-IoT in-band mode, NB-IoT standalone
mode and NB-IoT guard band mode
2500–2570 MHz uplink
2620–2690 MHz downlink
B8 for NR, LTE, ESS, WCDMA, GSM, NB-IoT in-band mode, NB-
IoT standalone mode, and NB-IoT guard band mode
880–915 MHz uplink
925–960 MHz downlink
B25 for NR, WCDMA, LTE, NB-IoT in-band mode, NB-IoT
standalone mode, and NB-IoT guard band mode
1850–1915 MHz uplink
1930–1995 MHz downlink
B28 for NR, LTE, ESS, NB-IoT in-band mode, NB-IoT standalone
mode, and NB-IoT guard band mode
703–748 MHz uplink
758–803 MHz downlink
B66A for NR, WCDMA(7), LTE, NB-IoT in-band mode, NB-IoT
standalone mode, and NB-IoT guard band mode
1710–1780 MHz uplink
2110–2180 MHz downlink
TMA Gain
B0A: 12 dB gain
Radio 4499 44B0A 44B28 C
B28: 12 dB gain
B1: 12 dB and 24 dB gain
Radio 4499 44B1 44B3 C
B3: 12 dB gain
B1: 12 dB gain
Radio 4499 44B1 44B7 C
B7: 12 dB gain
B2/B25: 12 dB gain
Radio 4499 44B2/B25 44B66A C
B66A: 12 dB gain
B5: 12 dB gain
Radio 4499 44B5 44B28 C
B28: 12 dB gain
B8: 12 dB gain
Radio 4499 44B8 44B28 C
B28: 12 dB gain
Dimensions
Radio 4499 44B0A 44B28 C H×W×D: 553 × 398 × 190 mm
Radio 4499 44B1 44B3 C H×W×D: 553 × 398 × 151 mm
Radio 4499 44B1 44B7 C H×W×D: 553 × 398 × 151 mm

245/1551-LZA 701 6001/1 Uen AE | 2021-02-09 7

 Radio Description

Description Value
Radio 4499 44B2/B25 44B66A C H×W×D: 553 × 398 × 147 mm
Radio 4499 44B5 44B28 C H×W×D: 553 × 398 × 190 mm
Radio 4499 44B8 44B28 C H×W×D: 553 × 398 × 190 mm
Weight
Radio 4499 44B0A 44B28 C 37.6 kg
Radio 4499 44B1 44B3 C 32 kg
Radio 4499 44B1 44B7 C 32 kg
Radio 4499 44B2/B25 44B66A C 32 kg
Radio 4499 44B5 44B28 C 37.6 kg
Radio 4499 44B8 44B28 C 37.6 kg
Color
Body NCS S 1002-B
Front NCS S 6502-B

(1) For detailed information about licenses and HWAC, see:

NR: Manage Licenses and Hardware Activation Codes in the NR RAN library.
LTE: Manage Licenses and Hardware Activation Codes in the LTE RAN library.
WCDMA: Manage Licenses and Hardware Activation Codes in the WCDMA Radio Node libraries.
GSM: User Description, GSM RAN Handling of Software Licenses and Hardware Activation Codes and MCPA
Guideline in the GSM RAN library.
(2) For detailed information about output power, see:
NR: Hardware-Related Capabilities in the NR RAN library.
LTE: Hardware-Related Capabilities in the LTE RAN library.
(3) It is dimensioned with a configuration targeting for maximum output power level. The COVERAGE mode prioritizes
output power but causes small penalty in EVM depending on carrier configurations such as wider carrier separation,
number of deployed carriers, carrier positions, and RAT combinations. The configuration alternatives in LTE attribute
SectorCarrier.radioTransmitPerfMode can be used to prioritize EVM performance.
(4) For detailed information about number of carriers, see Supported Radio Capabilities.
(5) For information about IBW, see Radio Node Configurations.
(6) GSM in mixed mode only.
(7) WCDMA is supported by B4 (1710–1755 MHz uplink, 2110–2155 MHz downlink)

8 245/1551-LZA 701 6001/1 Uen AE | 2021-02-09

 Technical Data

Allow a minimum of 300 mm free space to the ceiling or any overhanging

structure that can obstruct airflow and create a heat trap.

Table 8 Space Requirements between Radio Units Installed Side by Side

Mounting Direction Minimum Free Horizontal Space
between Radio Units (X)
Portrait 40 mm
Bookshelf 200 mm(1)
(1) An adjacent heat source with 500 W maximum heat dissipation requires minimum 100 mm
free space between the radio unit and the heat source.

3.4 Acoustic Noise

The radio sound pressure level is lower than 28 dBA at 1-meter distance for
hemispherical distribution.

3.5 Environmental Characteristics

This section contains operating environment data for the radio.

3.5.1 Operating Environment

The following are the values for the normal operating environment of the radio:

Table 9 Operating Environment

Description Value
Temperature(1) −40 to +55 °C
Solar radiation ≤ 1,120 W/m²
Relative humidity 5–100%
Absolute humidity 0.26–40 g/m3
Maximum temperature change 6.0 °C/min
Maximum wind load at 42 m/s (pole Radio 4499 44B0A 44B28 C
installed single case)
321 N (front), 117 N (side)
Radio 4499 44B1 44B3 C
320 N (front), 90 N (side)
Radio 4499 44B1 44B7 C
320 N (front), 90 N (side)
Radio 4499 44B2/B25 44B66A C

245/1551-LZA 701 6001/1 Uen AE | 2021-02-09 19

 Radio Description

Description Value
320 N (front), 90 N (side)
Radio 4499 44B5 44B28 C

321 N (front), 117 N (side)

Radio 4499 44B8 44B28 C
321 N (front), 117 N (side)
(1) Depending on installation scenario, traffic load, and configuration, the product can, in the
highest 10 °C temperature range, temporarily reduce the output power. This depends on the
durations of the high ambient temperature.

3.5.2 Heat Dissipation

The radio is convection cooled and designed for outdoor installation.

Avoid indoor installation in a room without adequate ventilation and cooling.

Max heat dissipation is calculated using the following formula:

Max Heat Dissipation = Max Power Consumption - Configured

Output Power

Heat dissipation can be calculated for different traffic loads using values from
Power Consumption Data. For more information, see Power Consumption
Calculations.

3.5.3 Vibration
This section describes the radio tolerance to vibrations. The radio operates
reliably during seismic activity as specified by test method IEC 60068-2-57 Ff.

Maximum level of Required Response 50 m/s2 within 2–5 Hz for DR=2%

Spectrum (RRS)
Frequency range 0.3–50 Hz
Time history signal Verteq II

The radio operates reliably during random vibration as specified by test method
IEC 60068-2-64 Fh

Random vibration, normal operation 0.3 m2/s3

3.5.4 Materials
All Ericsson products fulfill the legal and market requirements regarding the
following:

20 245/1551-LZA 701 6001/1 Uen AE | 2021-02-09

 Technical Data

— Material declaration

— Materials' fire resistance, components, wires, and cables

— Recycling

— Restricted and banned material use

3.6 Power Characteristics

This section describes the power supply requirements, power consumption, and
fuse and circuit breaker recommendations for the radio.

3.6.1 DC Power Characteristics

The power supply voltage for the radio is −48 V DC.

Table 10 Radio DC Power Supply Requirements

Conditions Values and Ranges
Rated voltage −48 V DC
Normal voltage range(1) B0A B28, B1 B3, B1 B7, B2/B25 B66A, B8 B28:
−36.0 to −58.5 V DC
B5 B28:
−38.0 to −58.5 V DC
Abnormal voltage range B0A B28, B1 B3, B1 B7, B2/B25 B66A, B8 B28:
0 to −36.0 V DC and −58.5 to −60 V DC
B5 B28:
0 to −38.0 V DC and −58.5 to −60 V DC
(1) The radio prevents startup until a stable input level is reached, this threshold is defined as cold
startup voltage at −46 V DC.

Fuse and Circuit Breaker Recommendations

The recommendations given in this section are based on peak power
consumption and give no information on power consumption during normal
operation.

The recommended melting fuse type is gG-gL-gD in accordance with

IEC 60269-1. Circuit breakers must comply with at least Curve 3 tripping
characteristics, in accordance with IEC 60934.

The radio has a built-in Class 1 (Type 1) SPD to protect the equipment if there is
lightning and network transients. The recommended fuse or circuit breaker rating
is therefore dimensioned not to trip the fuse or circuit breaker if there is most SPD

245/1551-LZA 701 6001/1 Uen AE | 2021-02-09 21

 Radio Description

operation. The minimum fuse rating can only be considered if it is accepted that
fuses or circuit breakers trip in such situations.

Table 11 External Radio Fuse and Circuit Breaker Recommendations

Unit (DC Output Power Maximum Load Maximum
Powered) Current at −36 V Allowed Fuse
DC Rating(1)
The operating
voltage range
refers to the
voltage at the
radio power input
port.
Radio 4499 4 × 80 W 32 A 40 A
44B0A 44B28 C
Radio 4499 44B1 4 × 80 W 32 A 40 A
44B3 C
Radio 4499 44B1 4 x 80 W 32 A 40 A
44B7 C
Radio 4499 4 × 80 W 40 A 50 A
44B2/B25 44B66
C
Radio 4499 44B8 4 × 80 W 32 A 40 A
44B28 C

Unit (DC Output Power Maximum Load Maximum

Powered) Current at −38 V Allowed Fuse
DC Rating(1)
The operating
voltage range
refers to the
voltage at the
radio power input
port.
Radio 4499 44B5 4 × 80 W 31 A 40 A
44B28 C
(1) The maximum allowed fuse rating must (with a certain safety margin 10–20%) be larger than
the maximum load current for reliable operation. However, it must not be larger than the next
or nearest higher fuse or circuit breaker standard value to minimize the cable cross-section area
and at the same time fully comply with relevant safety standards.

3.6.2 Power Consumption

For information on power consumption, see Power Consumption Calculations.

22 245/1551-LZA 701 6001/1 Uen AE | 2021-02-09

 Technical Data

3.7 System Characteristics

This section describes the system characteristics of the Radio System.

3.7.1 RF Electromagnetic Exposure

For general information on RF EMF exposure, see Radio Frequency
Electromagnetic Fields.

The tables list the compliance boundaries (exclusion zones), outside of which the
RF EMF exposure from Radio 4499 is below the limits applicable in:
— EU (1999/519/EC, 2013/35/EU, EN 50385) Table 12

— USA (47 CFR 1.1310) Table 13

— Canada (Health Canada Safety Code 6) Table 14

Table 12 Dimensions of the Box-Shaped Compliance Boundary for General Public (GP) and
Occupational (O) Exposure Applicable in the EU and Markets Employing the ICNIRP RF Exposure
Limits (Including 0.5 dB Transmission Loss and 0.6 dB Output Power Tolerance)
Mode and Output Power for Radio 4499 Dimensions of the Box-Shaped Compliance Boundary(1)(2) (m)
Distance in Front Width Height Distance Behind
of Antenna Antenna
Band Standard(3) Nominal IEC 62232 GP O GP O GP O GP O
Peak Output Installation
Power from Class
the Radio
B0A + G/W/L/I/N 4 × 40 W E+ 23.2 10.1 19.2 8.6 3.4 2.5 < 0.1 < 0.1
B28 (B0A) + (B0A) + 4 ×
L/I/N (B28) 40 W (B28)
B0A + G/W/L/I/N 4 × 60 W E+ 23.0 10.3 18.9 8.5 3.9 2.5 < 0.1 < 0.1
B28 (B0A) + (B0A) + 4 ×
L/I/N (B28) 20 W (B28)
B1 + B3 W/L (B1) + 4 × 50 W E+ 19.6 8.6 15.5 7 4.5 2.1 < 0.1 < 0.1
G/L (B3) (B1) + 4 × 50
W (B3)
B1 + B3 W/L (B1) + 4 × 40 W E+ 19.5 8.6 15.5 6.9 4.7 2.1 < 0.1 < 0.1
G/L (B3) (B1) + 4 × 60
W (B3)
B1 + B3 W/L (B1) + 4 × 60 W E+ 19.6 8.6 15.7 7 4.8 2.2 < 0.1 < 0.1
G/L (B3) (B1) + 4 × 40
W (B3)
B1 + B7 W/L/N/I 4 × 60 W E+ 18.2 7.9 13.9 6.2 4.5 2 < 0.1 < 0.1
(B1) + (B1) + 4 × 20
W/L/N/I W (B7)
(B7)
B1 + B7 W/L/N/I 4 × 40 W E+ 18.7 8.1 13.9 6.2 3.8 1.7 < 0.1 < 0.1
(B1) + (B1) + 4 × 40
W/L/N/I W (B7)
(B7)
B2/B25 G/W/L/N/I 4 × 60 W E+ 17.3 7.5 13.8 6.2 4.7 2.1 < 0.1 < 0.1
+ B66A (B2) + (B2/B25) + 4
W/L/N/I × 20 W
(B66A) (B66A)

245/1551-LZA 701 6001/1 Uen AE | 2021-02-09 23

 Radio Description

Mode and Output Power for Radio 4499 Dimensions of the Box-Shaped Compliance Boundary(1)(2) (m)
Distance in Front Width Height Distance Behind
of Antenna Antenna
Band Standard(3) Nominal IEC 62232 GP O GP O GP O GP O
Peak Output Installation
Power from Class
the Radio
W/L/N/I
(B25) +
W/L/N/I
(B66A)
B2/B25 G/W/L/N/I 4 × 40 W E+ 17.4 7.5 13.9 6.2 4.6 2.1 < 0.1 < 0.1
+ B66A (B2) + (B2/B25) + 4
W/L/N/I × 40 W
(B66A) (B66A)
W/L/N/I
(B25) +
W/L/N/I
(B66A)
B2/B25 G/W/L/N/I 4 × 20 W E+ 17.6 7.6 13.9 6.3 4.9 2.2 < 0.1 < 0.1
+ B66A (B2) + (B2/B25) + 4
W/L/N/I × 60 W
(B66A) (B66A)
W/L/N/I
(B25) +
W/L/N/I
(B66A)
B5 + G/W/L/N/I 4 × 60 W E+ 21.4 9.6 16.4 7.4 4.3 2.0 < 0.1 < 0.1
B28 (B5) + L/N/I (B5) + 4 × 20
(B28) W (B28)
B5 + G/W/L/N/I 4 × 40 W E+ 21.5 9.6 16.4 7.4 4.6 2.1 < 0.1 < 0.1
B28 (B5) + L/N/I (B5) + 4 × 40
(B28) W (B28)
B8 + G/W/L/N/I 4 × 40 W E+ 23.2 10.1 19.2 8.6 3.4 2.5 < 0.1 < 0.1
B28 (B8) + L/N/I (B8) + 4 × 40
(B28) W (B28)
B8 + G/W/L/N/I 4 × 60 W E+ 23.1 10.3 19.0 8.5 3.9 2.5 < 0.1 < 0.1
B28 (B8) + L/N/I (B8) + 4 × 20
(B28) W (B28)

(1) The compliance boundaries for B0A B28 and B8 B28 are determined for maximum output power with transmission
loss and power tolerance included using the antenna KRE 101 2325/1 for an electrical tilt of 0°.
(2) The compliance boundaries for other dual bands are determined for maximum output power with transmission loss
and power tolerance included using the antenna KRE 101 2294/1 and 2 degrees of electrical down tilt.
(3) G = GSM, W = WCDMA, L = LTE, N = NR, and I = NB-IoT.

Table 13 Dimensions of the box-shaped compliance boundary for general public (GP) and
occupational (O) exposure for Radio 4499 applicable in the markets employing the FCC RF
exposure limits for maximum output power with 0.5-dB transmission loss and 0.6-dB output power
tolerance included.
Mode and Output Power for Radio 4499 Dimensions of the Box-Shaped Compliance Boundary(1) (m)
Distance in Front Width Height Distance Behind
of Antenna Antenna
Band Standard Nominal IEC 62232 GP O GP O GP O GP O
Peak Output Installation
Power from Class
the Radio
B2/B25 G/W/L/N/I 4 × 60 W E+ 17.1 7.4 13.6 6.1 4.6 2.1 0.4 0.2
+ B66A (B2) + (B2/B25) + 4

24 245/1551-LZA 701 6001/1 Uen AE | 2021-02-09

 Technical Data

Mode and Output Power for Radio 4499 Dimensions of the Box-Shaped Compliance Boundary(1) (m)
Distance in Front Width Height Distance Behind
of Antenna Antenna
Band Standard Nominal IEC 62232 GP O GP O GP O GP O
Peak Output Installation
Power from Class
the Radio
W/L/N/I × 20 W
(B66A) (B66A)
W/L/N/I
(B25) +
W/L/N/I
(B66A)
B2/B25 G/W/L/N/I 4 × 40 W E+ 17.3 7.5 13.8 6.2 4.5 2.1 0.4 0.2
+ B66A (B2) + (B2/B25) + 4
W/L/N/I × 40 W
(B66A) (B66A)
W/L/N/I
(B25) +
W/L/N/I
(B66A)
B2/B25 G/W/L/N/I 4 × 20 W E+ 17.5 7.5 13.9 6.2 4.8 2.2 0.4 0.2
+ B66A (B2) + (B2/B25) + 4
W/L/N/I × 60 W
(B66A) (B66A)
W/L/N/I
(B25) +
W/L/N/I
(B66A)

(1) The compliance boundaries are determined for maximum output power with transmission loss and power tolerance
included using the antenna KRE 101 2294/1 and 2 degrees of electrical down tilt.

Table 14 Dimensions of the box-shaped compliance boundary for general public (GP) and
occupational (O) exposure for Radio 4499 applicable in Canada for maximum output power with
0.5-dB transmission loss and 0.6-dB output power tolerance included.
Mode and Output Power for Radio 4499 Dimensions of the Box-Shaped Compliance Boundary(1) (m)
Distance in Front Width Height Distance Behind
of Antenna Antenna
Band Standard Nominal IEC 62232 GP O GP O GP O GP O
Peak Output Installation
Power from Class
the Radio
B2/B25 G/W/L/N/I 4 × 60 W E+ 25.1 9.9 19.9 8.1 6.7 2.7 0.2 0.2
+ B66A (B2) + (B2/B25) + 4
W/L/N/I × 20 W
(B66A) (B66A)
W/L/N/I
(B25) +
W/L/N/I
(B66A)
B2/B25 G/W/L/N/I 4 × 40 W E+ 25.2 10.0 19.9 8.1 6.5 2.7 0.2 0.2
+ B66A (B2) + (B2/B25) + 4
W/L/N/I × 40 W
(B66A) (B66A)
W/L/N/I
(B25) +
W/L/N/I
(B66A)
B2/B25 G/W/L/N/I 4 × 20 W E+ 25.3 10.0 20.0 8.1 6.9 2.8 0.2 0.2
+ B66A (B2) + (B2/B25) + 4

245/1551-LZA 701 6001/1 Uen AE | 2021-02-09 25

 Radio Description

Mode and Output Power for Radio 4499 Dimensions of the Box-Shaped Compliance Boundary(1) (m)
Distance in Front Width Height Distance Behind
of Antenna Antenna
Band Standard Nominal IEC 62232 GP O GP O GP O GP O
Peak Output Installation
Power from Class
the Radio
W/L/N/I × 60 W
(B66A) (B66A)
W/L/N/I
(B25) +
W/L/N/I
(B66A)

(1) The compliance boundaries are determined for maximum output power with transmission loss and power tolerance
included using the antenna KRE 101 2294/1 and 2 degrees of electrical down tilt.

3.7.2 Software
For information on software dependencies, see Radio Software Support.

3.7.3 Radio Configurations

For information about available radio configurations, see Radio Node
Configurations.

3.7.4 VSWR Limitations

When a radio operates with WCDMA on two bands and is connected to a DUW, it
is not possible to distinguish VSWR between the bands. Instead, the worst case
(worst band) is reported.

26 245/1551-LZA 701 6001/1 Uen AE | 2021-02-09

 Hardware Architecture

4 Hardware Architecture

This section describes the radio hardware structure regardless of configuration or

frequency.

Ge18996A

Figure 9 Radio Components

Table 15 Key to Radio Components

Position Component
A Radio

4.1 Radio Overview

The radio contains most of the radio processing hardware. The following sections
describe the components inside the radio.

4.1.1 TRX
The Transmitter and Receiver (TRX) provides the following:

— Analog/Digital (A/D), Digital/Analog (D/A) conversion

— Channel filtering

— Delay and gain adjustment

— Digital predistortion

245/1551-LZA 701 6001/1 Uen AE | 2021-02-09 27

 Radio Description

— RF modulation and demodulation

— Optical cable interface termination

— Two receivers for RX diversity

— RET modem (the antenna system communication link)

4.1.2 Power Amplifier

The MCPA is the linear power amplifier for the RF carriers. The radio has two
MCPAs per RF port.

4.1.3 Filter Unit

The Filter Unit consists of band-pass filters.

In the radio, the Filter Unit also provides the following:

— VSWR supervision

— TX and RX combining and power splitting

4.1.4 DC SPD
An SPD protects the DC power input from lightning currents.

4.1.5 ALD (RET) SPD

An SPD provides overvoltage or overcurrent protection for the ALD (RET) port.

4.1.6 External Alarm SPD

An SPD provides overvoltage or overcurrent protection for the external alarm
ports.

4.1.7 RF SPD
An SPD provides overvoltage or overcurrent protection for the RF port.

4.2 Optical Indicators and Buttons

The radio is equipped with optical indicators that show system status. The radio
optical indicators are located under the maintenance cover.

28 245/1551-LZA 701 6001/1 Uen AE | 2021-02-09

 Hardware Architecture

A B C D E F

1 2

Ge18124A

Figure 10 Radio Optical Indicators and Buttons

Table 16 Description of Radio Optical Indicators and Buttons

Position Name Marking
A Maintenance button –
B Fault

C Operational

D Maintenance

E Interface 1
F Interface 2

For more information about the behavior of the optical indicators and the
maintenance button, refer to Indicators, Buttons, and Switches.

245/1551-LZA 701 6001/1 Uen AE | 2021-02-09 29

 Radio Description

5 Connection Interfaces

A B C D

E F G H I J K L
Ge18123A

Figure 11 Radio 4499 Connection Interfaces

Table 17 Radio Connection Interfaces

Position Description Marking Connector Types Cable Illustration
A Antenna A A TxRx 4.3–10
B Antenna B B TxRx
C Antenna C C TxRx
D Antenna D D TxRx

E Maintenance button – – –
F Optical indicators – –
, ,
1, 2
G DIN 14 pin, following DIN connector, 14 pin
functions supported:

— EC-light

— External alarms

H ALD (used for a RET unit for ALD DIN connector, 8 pin
example)

30 245/1551-LZA 701 6001/1 Uen AE | 2021-02-09

 Connection Interfaces

Position Description Marking Connector Types Cable Illustration

I Optical cable 1 1 LC (On SFP+) with
support for FullAXS
J Optical cable 2 2

K −48 V DC power supply −48 V Power connector

L Grounding 2 × 6 mm dual lug

5.1 Antenna Interface

The antenna interfaces provide connections for the radio to antennas. RF cables
connect the radio to the antenna.

Table 18 Radio Antenna Connection Interface Characteristics

Connector Type RF Cable Type Cable Connector Type
4.3-10, insert-receiver type 50 Ω coaxial 4.3-10 type

Table 19 Radio Antenna Cable Connectors

Radio Connectors Antenna Connectors
A TxRx TX/RX
B TxRx TX/RX
C TxRx TX/RX
D TxRx TX/RX

5.2 Maintenance Button

The maintenance button is at the left of the symbol.

245/1551-LZA 701 6001/1 Uen AE | 2021-02-09 31

 Radio Description

For more information about the maintenance button, see Indicators, Buttons, and
Switches.

5.3 Optical Indicators

Optical indicators show the system status.

For more information about the optical indicators, see Indicators, Buttons, and
Switches.

5.4 DIN 14 Pin Interface

The DIN 14 pin interface supports the following functions:

— EC-light

— External alarm

5.4.1 EC-Light
The EC-light function delivers communication signals and alarms between the
optional PSU and the radio.

5.4.2 Ext Alarm Interface

Two external alarms can be connected to the radio external alarm port.

5.5 ALD Ctrl Interface

The ALD control (ALD Ctrl) connects an ALD (RET) cable to the radio for antenna
system communication. The interface supports 2.5 A DC.

5.6 Interface for Optical Cable to Main Unit

The 1 and 2 interfaces provide connections to optical cables for traffic and
timing signals between the radio and the main unit. An SFP+ is used to connect
the optical cable to the radio.

Note: The radio uses SFP+ modules for optical transmission and optical radio
interfaces on Data 1 (optical cable 1) and Data 2 (optical cable 2).

Only use SFP+ modules approved and supplied by Ericsson. These modules fulfill
the following:

32 245/1551-LZA 701 6001/1 Uen AE | 2021-02-09

 Connection Interfaces

— Compliance with Class 1 laser product safety requirements defined in

standard IEC 60825-1.

— Certification according to general safety requirements defined in standard

IEC/EN 62368-1.

— Functional and performance verified to comply with Radio System

specifications.

Recommended SFP+ modules are obtained from the product packages for the
Radio System and the Main Remote Installation products. For more information
about SFP modules, see SFP Module Selector Guide and Site Installation
Products Overview.

5.7 −48 V DC Power Supply Interface

The −48 V DC power connection is done through a connector with a 3-wire (DC-I)
connection or a connector with a 2-wire (DC-C) connection.

The power cable conductor has a wire for both the 0 V conductor and a wire for
the −48 V DC conductor.

All cables must be shielded. The shielding must be properly connected both to the
power connector and to the grounding interface in the power supply equipment,
otherwise the radio unit over voltage and lightning protection does not work
properly.

Power Cable Dimensions and Cable Length

For more information on –48 V DC power cable dimensions and cable length, see
Site Installation Products Overview, excluding radio units with R-state R1 listed
below.
— Radio 4499 44B0A 44B28 C

— Radio 4499 44B1 44B3 C

— Radio 4499 44B2/B25 44B66A C

— Radio 4499 44B8 44B28 C

To find which power cable length to use for the excluded radio units, see Table
20.

Table 20 Power Cable Length

Cross-Sectional Area of Cable (mm²) Maximum Cable Length (m)
6 25
10 40

245/1551-LZA 701 6001/1 Uen AE | 2021-02-09 33

 Radio Description

Cross-Sectional Area of Cable (mm²) Maximum Cable Length (m)

16 65
25 100

Power Cable Connector

To find which connector or junction box to use, see Table 21.

Table 21 −48 V DC Power Supply Connector or Junction Box

Cross-Sectional Area of Each Connector or Junction Box
Conductor (mm²)
6–16 For 3-wire (DC-I), used with connector
RNT 447 36/01. For 2-wire (DC-C),
used with connector RNT 447 37/01.
25 Used with junction box NTB 101 75/1

5.8 Grounding Interface

The unit must be grounded to protect it from overvoltage and lightning strikes.

For more information about grounding principles, see Grounding Guidelines for
RBS Sites.

34 245/1551-LZA 701 6001/1 Uen AE | 2021-02-09