Frame Analysis Report

Analyzed File: Assembly3.iam

Version: 2023 (Build 270158000, 158)
Creation Date: 11/01/2023, 23.38
Simulation Author: USER
Summary:

Simulation:1
General objective and settings:
Simulation Type Static Analysis
Last Modification Date 11/01/2023, 23.25
Model State [Primary]
Design View Default
Positional [Primary]

iProperties

Summary
Author USER

Project
Part Number Assembly3
Designer USER
Cost Rp0,00
Date Created 15/10/2022

Status
Design Status WorkInProgress

Physical
Mass 6,429 kg
Area 5614,868 mm^2
Volume 818,995 mm^3
 x=268,127 mm
Center of Gravity y=270,529 mm
z=-356,088 mm

Material(s)
Name Steel, Mild
Mass Density 7,850 g/cm^3
General Yield Strength 207,000 MPa
Ultimate Tensile Strength 345,000 MPa
Young's Modulus 220,000 GPa
Stress
Poisson's Ratio 0,275 ul
ISO 657-2 30x 20x 3 - 710
ISO 657-2 30x 20x 3 - 710
ISO 657-2 30x 20x 3 - 243
ISO 657-2 30x 20x 3 - 243
ISO 657-2 30x 20x 3 - 196,81
ISO 657-2 30x 20x 3 - 196,86
ISO 657-2 30x 20x 3 - 196,81
ISO 657-2 30x 20x 3 - 196,81
ISO 657-2 30x 20x 3 - 379,81
ISO 657-2 30x 20x 3 - 710
Part Name(s)
ISO 657-2 30x 20x 3 - 710
ISO 657-2 30x 20x 3 - 379,81
ISO 657-2 30x 20x 3 - 195
ISO 657-2 30x 20x 3 - 123
ISO 657-2 30x 20x 3 - 120
ISO 657-2 30x 20x 3 - 139,5
ISO 657-2 30x 20x 3 - 65,84
ISO 657-2 30x 20x 3 - 65,89
ISO 657-2 30x 20x 3 - 196,81
ISO 657-2 30x 20x 3 - 196,81

Cross Section(s)
Section Area (A) 142,717 mm^2
Section Width 20,000 mm
Geometry Properties Section Height 30,000 mm
Section Centroid (x) 5,016 mm
Section Centroid (y) 9,896 mm
Moment of Inertia (Ix) 12475,385 mm^4
Moment of Inertia (Iy) 4371,910 mm^4
Torsional Rigidity Modulus (J) 473,174 mm^4
Mechanical Properties
Section Modulus (Wx) 620,539 mm^3
Section Modulus (Wy) 291,775 mm^3
Torsional Section Modulus (Wz) 101,839 mm^3
 Reduced Shear Area (Ax) 41,194 mm^2
Reduced Shear Area (Ay) 63,503 mm^2
ISO 657-2 30x 20x 3 - 710
ISO 657-2 30x 20x 3 - 710
ISO 657-2 30x 20x 3 - 243
ISO 657-2 30x 20x 3 - 243
ISO 657-2 30x 20x 3 - 196,81
ISO 657-2 30x 20x 3 - 196,86
ISO 657-2 30x 20x 3 - 196,81
ISO 657-2 30x 20x 3 - 196,81
ISO 657-2 30x 20x 3 - 379,81
ISO 657-2 30x 20x 3 - 710
Part Name(s)
ISO 657-2 30x 20x 3 - 710
ISO 657-2 30x 20x 3 - 379,81
ISO 657-2 30x 20x 3 - 195
ISO 657-2 30x 20x 3 - 123
ISO 657-2 30x 20x 3 - 120
ISO 657-2 30x 20x 3 - 139,5
ISO 657-2 30x 20x 3 - 65,84
ISO 657-2 30x 20x 3 - 65,89
ISO 657-2 30x 20x 3 - 196,81
ISO 657-2 30x 20x 3 - 196,81

Beam Model
Nodes 50
Beams 20
- Angles 20

Rigid Links
Displacement Rotation
Parent
Name X- Y- Z- X- Y- Z- Child Node(s)
Node
axis axis axis axis axis axis
Rigid Link:1 fixed fixed fixed fixed fixed fixed Node:1 Node:9
Node:12, Node:33,
Rigid Link:2 fixed fixed fixed fixed fixed fixed Node:2
Node:5
Rigid Link:3 fixed fixed fixed fixed fixed fixed Node:41 Node:40
Node:13, Node:36,
Rigid Link:4 fixed fixed fixed fixed fixed fixed Node:3
Node:6
Rigid Link:5 fixed fixed fixed fixed fixed fixed Node:4 Node:16
Rigid Link:6 fixed fixed fixed fixed fixed fixed Node:42 Node:37
Rigid Link:7 fixed fixed fixed fixed fixed fixed Node:10 Node:22
Rigid Link:8 fixed fixed fixed fixed fixed fixed Node:11 Node:21
Rigid Link:9 fixed fixed fixed fixed fixed fixed Node:14 Node:20
 Rigid
fixed fixed fixed fixed fixed fixed Node:15 Node:19
Link:10
Rigid
fixed fixed fixed fixed fixed fixed Node:43 Node:38
Link:11
Rigid
fixed fixed fixed fixed fixed fixed Node:44 Node:48
Link:12
Rigid
fixed fixed fixed fixed fixed fixed Node:45 Node:39
Link:13
Rigid
fixed fixed fixed fixed fixed fixed Node:46 Node:49
Link:14
Rigid
fixed fixed fixed fixed fixed fixed Node:47 Node:50
Link:15

Operating conditions

Gravity
Load Type Gravity
Magnitude 9810,000 mm/s^2
Direction Y-

Continuous Load:1
Load Type Continuous Load
Magnitude 10,000 N/mm
Beam Coordinate System No
Angle of Plane 270,00 deg
Angle in Plane 90,00 deg
Qx 0,000 N/mm
Qy -10,000 N/mm
Qz 0,000 N/mm
Offset 0,000 mm
Length 690,208 mm
End Magnitude 10,000 N/mm

Selected Reference(s)
Continuous Load:2
Load Type Continuous Load
Magnitude 10,000 N/mm
Beam Coordinate System No
Angle of Plane 270,00 deg
Angle in Plane 90,00 deg
Qx 0,000 N/mm
Qy -10,000 N/mm
Qz 0,000 N/mm
Offset 0,000 mm
Length 690,208 mm
End Magnitude 10,000 N/mm

Selected Reference(s)
Fixed Constraint:1
Constraint Type Fixed

Selected Reference(s)
Fixed Constraint:2
Constraint Type Fixed

Selected Reference(s)
Fixed Constraint:3
Constraint Type Fixed

Selected Reference(s)
Results

Reaction Force and Moment on Constraints

Reaction Force Reaction Moment
Constraint
Name Components Components
Magnitude Magnitude
(Fx,Fy,Fz) (Mx,My,Mz)
2262,497 N -31818,993 N mm
Fixed 452410,385 N
5851,955 N 4974,677 N 108175,988 N mm
Constraint:2 mm
-2092,624 N 438133,157 N mm
6737,410 N -2785,973 N -653822,070 N mm
 Fixed 6002,250 N 654925,465 N 1441,548 N mm
Constraint:1 1266,509 N mm 37973,514 N mm
523,477 N -30805,294 N mm
Fixed 182982,009 N
3051,970 N 2891,025 N -62360,668 N mm
Constraint:3 mm
826,115 N 169247,147 N mm

Static Result Summary

Name Minimum Maximum
Displacement 0,000 mm 10,429 mm
Fx -2948,383 N 4273,331 N
Forces Fy -8179,523 N 7150,864 N
Fz -2992,263 N 3530,153 N
Mx -230500,172 N mm 295184,123 N mm
Moments My -325211,992 N mm 341404,469 N mm
Mz -7802,835 N mm 3722,104 N mm
Smax -8,359 MPa 1288,279 MPa
Smin -1319,381 MPa 2,345 MPa
Smax(Mx) 0,000 MPa 371,452 MPa
Normal Stresses Smin(Mx) -475,690 MPa 0,000 MPa
Smax(My) 0,000 MPa 1170,094 MPa
Smin(My) -1114,598 MPa 0,000 MPa
Saxial -24,735 MPa 20,966 MPa
Tx -103,737 MPa 71,573 MPa
Shear Stresses
Ty -112,606 MPa 128,805 MPa
Torsional Stresses T -36,549 MPa 76,619 MPa

Figures

Displacement
Fx
Fy
Fz
Mx
My
Mz
Smax
Smin
Smax(Mx)
Smin(Mx)
Smax(My)
Smin(My)
Saxial
Tx
Ty
T
C:\Users\USER\Documents\Inventor\mesin pencetak bracket\Assembly3.iam