Scribd
Upload
34 views6 pages

DS-3E1526P-EI Datasheet 20240428

Uploaded by

alt.rp-0omjdx8z
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views6 pages

DS-3E1526P-EI Datasheet 20240428

Uploaded by

alt.rp-0omjdx8z
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

DS-3E1526P-EI

24-Port Gigabit Smart PoE Switch

Smart managed switches are developed by Hikvision, featuring easy management and maintenance. You can easily deploy,
monitor, and expand your video security system anytime and anywhere with our software platforms. You can view the
network topology, monitor the health of the network, and receive device alarms in real time, which greatly reduces the cost
of network operation and maintenance.

 24 x gigabit PoE RJ45 ports, 1 × gigabit RJ45 port, 1 x gigabit fiber optical port
 Total PoE power budget 370 W
 Unified cloud management for security systems
 Network topology at your fingertips
 Remote troubleshooting
 Visualized topology management
 Up to 300 m long-range PoE transmission
 6 kV surge protection

Specification
General
Shell Metal material
Net Weight 3.1 kg (6.83 lb)
Gross Weight 3.3 kg (7.27 lb)
Dimensions (W × H × D) 440.0 mm × 220.8 mm × 44.0 mm (17.32'' × 8.69'' × 1.73'')
Operating Temperature 0 °C to 45 °C (32 °F to 113 °F)
Storage Temperature -40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity 5% to 95% (no condensation)
Relative Humidity 5% to 95% (no condensation)
Power Supply 100~240 V AC, 50/60 Hz, Max. 6.3 A
Installation Mode Rack (equipped with mounting ears)
Max. Power Consumption 400 W
Power Consumption in Idle 30 W
Surge Protection 6 kV
Network Parameters
Ports 24 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
MAC Address Table 8K
Switching Capacity 56 Gbps
Packet Forwarding Rate 41.66 Mpps
Internal Cache 4.1 Mbits
PoE Power Supply
PoE Standard IEEE 802.3af,IEEE 802.3at
PoE Power Pin 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port PoE: Ports 1 to 24
Max. Port Power 30 W
PoE Power Budget 370 W
Software Function
Ports 1 to 24: up to 300 m.
Long Range
Long range performance may vary depend on camera model or cable condition.
PoE Watchdog Ports 1 to 24: auto detect and restart the cameras that do not respond.
Link aggregation is used to aggregate multiple physical ports to form a logical port for
load balancing, bandwidth expansion, and port protection.
Link Aggregation
Support static link aggregation.
Support 8 aggregation groups.
Loop prevention is used to prevent the switching network from forming loops, which
will seriously affect network communication. Disabled by default.
Loop Prevention
Support 802.1D STP.
Suppport 802.1w RSTP.
VLAN is used for network scale planning and network health improvement.
Support 802.1Q.
VLAN Configurable VLAN ID from 1-4094.
Support Trunk, Access port mode.
Support Max. 32 VLAN.
Ports 1 to 24: port isolation mode to improve network security.
Port Isolation Ports in an isolation group cannot communicate with each other, but they can
communicate with ports outside the isolation group.
Support device management via web.
Support DHCP Client. Enabled by default for dynamic assignment of management IP
addresses.
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
System Maintenance Support remote management via Hik-Partner Pro.
Support cable detection. Abnormal open circuits and short circuits as well as network
cable length can be detected.
Support 802.1ab LLDP for peer device discovery.
Support port mirroring for fault locating.
Support one-click activation and remote management via Hik-Partner Pro. Functions
supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
HPP
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device.
Approval
CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN
EMC
50130-4: 2011 +A1: 2014, EN 55035: 2017);
UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014
Safety (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2:
2013, EN 62368-1: 2014+A11: 2017)
Chemistry CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No.1907/2006)


Available Model
DS-3E1526P-EI
DS-3E1526P-EI V2

Typical Application

Physical Interface
Front Panel

Rear Panel

No. Indicator/Port Description


 Solid on: The switch is powered on normally.
1 PWR Indicator
 Unlit: No power supply is connected or power supply is abnormal.
 Solid on/Flashing: The output power of the switch is about to reach or has reached
the upper limit. The power supply may be abnormal if more devices are connected.
 Unlit: The switch does not supply power to a powered device (PD), or supplies
2 PoE-MAX Indicator
power to a PD normally and its output power does not reach the upper limit. (About
5 seconds after the output power of the switch returns to normal, the PoE-MAX
indicator will be unlit.)
 Solid on: The port is connected.
Gigabit RJ45 Port Indicator
3  Flashing: The port is transmitting data.
(Port 25)
 Unlit: The port is disconnected or connection is abnormal.
 Solid on: The gigabit SFP fiber optical port is connected.
Gigabit SFP Fiber Optical
4  Flashing: The gigabit SFP fiber optical port is transmitting data.
Port Indicator (Port 26)
 Unlit: The gigabit SFP fiber optical port is disconnected or connection is abnormal.
5 Reset Button Used for restoring all the configurations of the switch to the default settings.
 Solid on: The port is connected.
6 LINK/ACT Indicator  Flashing: The port is transmitting data.
 Unlit: The port is disconnected or connection is abnormal.
 Solid on: The switch supplies power to a PD normally.
7 PoE Indicator
 Unlit: The switch is disconnected from a PD or power supply is abnormal.
8 Gigabit PoE RJ45 Port Used for connection to a PD via a network cable.
9 Gigabit RJ45 Port (Port 25) Used for connection to another device via a network cable.
Gigabit SFP Fiber Optical Used for connection to another device via an optical fiber when plugged into with an
10
Port (Port 26) optical module.
11 Grounding Terminal Used for connecting to the grounding cable to protect the switch from lightning.
12 Power Supply Use the attached power cord to connect the switch to a socket.

Dimension

You might also like