®

ORDER NO. MGCS060809C0 TORANO-MAKI E Service Modes (For Copier) 2. Check Output
Press the "START" key to start, and press the "STOP" key to reset. No.
31
Item
ADF Duplex Scanning 0 : No
F5 Mode
Function
1
Default Setting
No. Item
F6 Mode
Remarks
Setting
Range

DP-8020E/8020P/8016P
These Service Modes are provided to assist the technician in checking for abnormalities in the copier, and a 1 : Auto 12 Side Adjust (Tray 2) Adjustment of LSU side-side (2nd Tray). -8 - +7
F4 Mode (Output Check)
means of making adjustments to the Input/Output of major components. 0.5mm
No. Item Function Remark 32 Job Build, and SADF Mode 0 : No 0
The Ninja’s Torano — maki Caution: 1 : Yes
The factory default parameters are preset (destination dependent) for optimum performance, and in 040 Total Counter When SPC PCB CN715-8 signal 13 Side Adjust (Tray 3) Adjustment of LSU side-side (3rd Tray). -8 - +7
compliance with the local telecommunication regulations/standards, and do not need to be changed. level changes to 0V from +24V, 33 TH Sensor (Laser duty) 0 : No 0.5mm
Changing some of these parameters may cause the unit to be no longer compliant, or become count up the Total Counter. 1 : Mid 14 Side Adjust (Tray 4) Adjustment of LSU side-side (4th Tray). -8 - +7
2 : Large 0.5mm
Schematic Diagram

4
inoperable. 041- Not Used
049 34-37 Not Used 15 Not Used

Service Mode Procedure 050 Main Motor When SPC PCB CN723-2 signal
level changes to 0V from +5V, the
38 2-Sided Mode Default 0 : No
1 : 1 to 2
0 16 Side Adjust (ADU) Adjustment of LSU side-side (ADU). - 8 - +7
0.5mm
1. To select the Service Mode Main Motor activates. 2 : 2 to 2 17 Standard
t Grid Voltage Charge voltage compensation adjustment. -128 - +19
The service mode is selected when "FUNCTION", "ORIGINAL SIZE", and "3" keys are sequentially 3 : B to 2 2.0V
051 Toner Bottle Motor Rotation In When SPC PCB CN720-16 signal
pressed, then F1 will appear in the display. Forward Direction level changes to 0V from +24V, the 39 Not Used 18 Standard Laser Power Laser power compensation adjustment. -19 - +38
Motor rotates in the forward 40 Double Count 0 : No 1 (for USA / Canada) 0.05mV
1 : LDR 3 (for Europe)

PNL2
HPMB 2. To exit the Service Mode direction. 19 Std Bias DC Voltage Adjustment of bias standard voltage. -128 - +48
BA
PNL4
30
Keyboard 29
PS The service mode is reset when the "FUNCTION", and "CLEAR" keys are pressed simultaneously. 052 Toner Screw Motor When SPC PCB CN720-18 signal 2 : LDR, LGL 2.6V

DETECTION
level changes to 0V from +24V, the 3 : A3
(Option) to FXB V0

Copier Service Mode Functions

20 Not Used

ORIGINAL
28
CN280 CN251 CN250 Clutch activates. 4 : A3, B4

3 SENSOR
27
V4 21 TDC Gain Voltage Adjustment of toner density sensor gain -70 - +57
053 Power Supply Fan When SPC PCB CN704-9,10, 41 Count Up Timing 0 : At feed 1

10
11
12
13
14

10
11
12

10
11
12
13
14
15
16
17
18
V3 voltage. 0.033V

1
2
3
4
5
6
7
8
9

1
2
3
4
5
6
7
8
9

1
2
3
4
5
6
7
8
9
26 1 : At exit

nBZH1GH5
Service Modes (For Copier) CN709-16 are 24V, Power Supply

*1

pBZCLK5
V2 22 DC Bias ON timing -10 - +10

nLEDSLP
pSPENB
25

LEDCT0

LEDCT1
nSLPKY
Service Fan rotates high-speed. 42 KEY/DEPT. Counter 0 : No 0

SCN11

SCN10

LEDCT2

LEDCT3

LEDCT4
V1 0.01Sec.

SCN8
SCN9
nOPT
Item Function

SCN2
KIN4
KIN5
KIN3
KIN6
KIN2
KIN7
KIN1

KIN0

GND
24

GND

LED6
1 : Key Cntr

+SLP
(Factory use only)

SCN0

SCN1
Mode

GND

KIN0
KIN1
054- Not Used

BAT+
LED0

LED1

LED2

LED3

LED4

LED5
KIN7

KIN6

KIN5

KIN4

KIN3

KIN2
BZ+
C2- 23 DC Bias OFF timing -10 - +10

BZ-
1
2
23
F1 Self Test 00 CCD Test This test is used for checking the CCD. 055 2 : DEPT.
+5VP
22
C2+
3 : Card. 0.01Sec.
1 1 01 LCD/LED Test This test is used for checking the LCD, 056 Fuser Fan When SPC PCB CN709-13 is 24V,
nANG C1+ 24-25 Not Used

nAAPNT

10
11
12
13
14

10
11
12

10
11
12
13
14
15
16
17
18
21 43 Key Counter Timing Same as F5-41 0

1
2
3
4
5
6
7
8
9

1
2
3
4

1
2
3
4
5
6
7
8
9

1
2
3
4
5
6
7
8
9
2 2 Fuser Fan rotates.

MOTOR
SNS GND C1- and LEDs.

GND
26 TDC Judgment Level Adjustment of toner supply starting -26 - +26
CN234 CN231 CN230 20 44 Not Used

+5v
3 3 057- Not Used
CN657

CN235 02 Page Memory Test This test is used for checking the Page

ADF EXIT COVER

C3+ judgement voltage level. 19.5mV

ADF
nBDOOR

FEED 2 ROLLER
19 45 Dept Code Reentry Again 0 : Yes 0

CN221
060

DUPLEX EJECT
4 4 Memory.

PNL1
1 C4+ 27-29 Not Used

LCD
nORI 1

CN223
18 1 : No

1
2
3
061 Registration Clutch When SPC PCB CN715-2 signal 1 minute

ADF ROLLER
HOME 1 5 +5VP VOUT 03 Print Test Pattern 1 Prints the pattern for setting the Paper
GND 1 2 17 30 Light Halftone Adj. Halftone duty ratio adjustment -127 - +127
1 CN27

INVERTING
POSITION 2 6 MGND VSS position alignment. level changes to 0V from +24V, 46 Not Used
LDORI 2 16 31 Fuser Temperature Adjustment of fuser temperature. -15 - +15

SENSOR

SENSOR
SENSOR
SENSOR 3 2 clutch operates. 47 TH Sensor (T corona current) 0 : No 1

CLUTCH

CLUTCH
CLUTCH
7

ROLLER
04 Print Test Pattern 2 Prints the Slant pattern for setting the
GND
CN220 VCL

M
CN232 CN233 15 0.833°C

EJECT
3 3
VDD Paper position alignment. 062 Not Used 1 : Mid
+24V
14 2 : Large 32 Fuser Edge Temperature Temperature compensation for edges -15 - +15

10

10
11
12
13
14
15
16
17
18

10
11
12
13
14
15
16
4 4 063 Paper Feed Roller Clutch When SPC PCB CN715-4 signal 1 minute

1
2
3
4
5
6
7
8
9

1
2
3
4
5
6
7
8
9
05 Print Test Pattern 3 Prints the Grid pattern for setting the

1
2
3
4
5
6
7
8
9
nAAPNT DB7 0.833°C
5 13 (1st Paper Tray) level changes to 0V from +24V, 48 TH Sensor (DEV) 0 : No 1
5 Paper position alignment.

nLEDALM
DB6

nLEDACT

nLEDDAT
N.C. 33 TDC Max. Read Only Set by F8-20 TDC Check Operation -99 - +99

G5
12 clutch operates. 1 : Mid

LEDCT0

LEDCT4

LEDCT3

LEDCT2
LEDCT1
6 6 06 Print Test Pattern 4 Prints the pattern for setting the Duplex

1
2
3
1
4

1
2
3

1
2
3

1
4
1
4
1
2
3
4
5
6

SCN4
SCN5
SCN3
SCN6
DB5

KIN3

KIN2
KIN7
KIN1
KIN0
nAB4SN (Read only)

+ALM
+DAT

+ACT
N.C.
2 : Large

LED9

LED8

LED7
11

KIN4

KIN5

KIN6
064 Lift Motor When SPC PCB CN706-2 signal

N.C.
7 Paper position alignment.
D

7 DB4
nAA3SN 34 TDC Min. Read Only Set by F8-20 TDC Check Operation -99 - +99
+24VOPF

+24VOPF

+24VOPF
10 (1st Paper Tray) level changes to 0V from +24V, 49 Not Used

nCCLH3

nAB2SN

nCCLH2

nCCLH1
8 8 DB3 F2 Single Copy Test One sheet is copied when the Start key

nAREV
OUTA

nAEJC

IOUTB
(Read only)

IOUTA
OUTB
nAADL1 9 motor rotates in the ascending

OUTA
1 1 50 Auto Contrast Adjust 0 : No 1

+24V

+24V
is pressed.

GND

GND

GND

nPNLRST
9

10

10
11
12
13
14
15
16
17
18
9 DB2

PNLRXD

nLPOW2
nLPOW1
+5v

+5v

+5v

PNLTXD
SCANNING

1
2
3
4
5
6
7
8
9

1
2
3
4
5
6
7
8
9
+24V

nSLPKY
8 direction. 35 TDC Avg. Read Only Set by F8-20 TDC Check Operation -99 - +99

nWAKE
nAADL2 1 : Yes

nVCNT
2 2 F3 Continuous Copy Test Multi copies are made when the Start
CN655

10 10 CN252 CN253 DB1

+5VP
nOUTA

+24V
(Read only)

GND
GND
GND
nAB2SN 7 065 ADU Solenoid When SPC PCB CN728-2 signal 1 minute

+5V
51 Dept. Counter (COPY) 0 : No 1
M
MOTOR

PNL3
3 3 key is pressed.

10
11 11 DB0

1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
OUTB
1
2
nAB1SN 6 level changes to 0V from +24V, 1 : Yes 36 Paper Loop (Tray 1) Individual Fine Adjustment for Tray 1 -99 - +99
4
+24V
4 12 12 CN24 CN30 CN22 CN256 CN254 5
E_RDB F4 Input / Output Status Test The functioning of Input / Output items
solenoid operates. 37 Not Used
nAEJC 52 Dept. Counter (FAX) 0 : No 0

G6
5 5
13
1
RW_WRB (selected item numbers) is checked.
nOUTB 13

1
2
3
4
5
6

1
2
3
4
nAREV 4 066- Not Used 1 : Yes 38 F8-09 (TDC) Adjustment time (Factory use only) -1 - +5
6 6
14 14 CN26 CN25 CN28 CN29 3
RS F5 Function Parameters Various function settings (selected by
069 60Sec.
nAOAC code numbers) can be changed. 53 2-Sided Auto Shift 0 : No 0
CN21

RESETB

10
15 15 2 070 Paper Feed Roller Clutch When CST2 PCB CN773-2 signal 1 minute
2
1
5
4
3
7
6

2
1

9
8
7
6
5
4
3
2
1

6
5
4
3
2
1
nAKEEP1 F6 Adjust Parameters Various function settings (selected by 1 : Auto sft 39 LSU Unit PWM Adjust Adjustment of PWM value of LSU. -32 - +32
CSB1
16 1 (2nd Paper Tray) level changes to 0V from +24V,

10
11
12
13
14
15
16
+24V 16 54 Margin Reduction 0 : No 0 40 Transfer Current Side 1 Adjustment of Transfer Current. -62 - +110
nASTAMP

1
2
3
4
5
6
7
8
9
nAB1SN
nAA3S
nAB4S

nAADL2

nAADL1
code numbers) can be adjusted.
+24VOPF
nAKEEP2
nAPACHG

nAOAC
1
+24VOPC

+24VOPC

1
nAKEEP2

nAKEEP1

+24VOPF

GND
17 CN52 clutch operates.

+5v
17 1 : Yes 0.15uA
nAPICR

+24V

GND

GND

GND

GND
2 2 nAPACHG F7 Electronic Counter Electronic Counters for Maintenance

+5v

+5v

+5v

+5v
CN656

071 Lift Motor When CST2 PCB CN774-2 signal

INV

nFLON 18 18 55 Margin Value Default 0 : 5 mm 1 41 Paper Loop (Bypass) Individual Fine Adjustment for Sheet Bypass -99 - +99

1
2
3
4
5
6

1
2
3
4
CN1

CN650

3 3 nAPICR CN51 CN145 F8 Service Adjustment Perform pseudo-operation of an item (2nd Paper Tray) level changes to 0V from +24V,
MGND 19 19 1 : 10 mm 42 Paper Loop (Tray 2) Individual Fine Adjustment for Tray 2 99 --+99

3
2
1
CN256 CN254

3
2
1
4 4 nSTAMP (selected by code numbers) motor rotates in the ascending
CN2 2 : 15 mm

10
11
12
13
14
15
20

OPEN DETECTION
20
2
1

3
1
2
4
43 Paper Loop (2-Sided) Adjustment for the length of the loop formed -99 - +99
2
1

MGND
3
2
1

1
2
3
4
5
6
7
8
9
5 F9 Unit Maintenance Fax Service Mode direction.
ADF

5 nACLH1
3 : 20 mm

READ POINT
1
5

21 21
PNL3-4 PNL3-3 Service Alert Tel # before the copier timing roller.
4
3
2
1

ORIGINAL 3
2
SENSOR 1 1
ORIGINAL 3
2
SENSOR 2 1
nACLH2 072 Intermediate Roller Clutch When CST2 PCB CN773-4 signal 1 minute

nLPOW1
nLPOW2
22 56 Edge Value Default 0 : 5 mm 0 44 FAX Laser Duty Adj Printer Density Adjustment for FAX. -99 - +99

nVCNT
22 Firmware Version
HDD

SENSOR
HVAC1
HVAC2

CN41 (2nd Paper Tray) level changes to 0V from +24V,

+3.3V
+3.3V
+5VD
+5VP
1 : 10 mm

ADF COVER

+24V
nACLH3

GND

GND
GND
GND
GND
GND
REVERSING GUIDE 1

23 (-) : Darker.

+5V
23

LENGTH
Print Device Info.

LENGTH
SOLENOID
PLATE SOLENOID

DUPLEX 2 GUIDE

SNS clutch operates. 2 : 15 mm

RELEASE LEVER

nACLOCKAD1
24 LED SWITCH (+) : Lighter.

SENSOR
24

1
2
3
4
5
6
7
8

1
2
3
4
5
nASTROAD1 073- Not Used 3 : 20 mm
STAMP

25 CN142 CN141 1 45 Not Used

10
11
12
13
14
15
25

CNSHD1
074

1
2
3
4
5
6
7
8
9

CNHD1
57 Book Value Default 0 : 15 mm 1

HDD 40P
CN143
pADATA1A

CN59
46 PRINTER Laser Duty Adj Printer Density Adjustment for Printer -99 - +99
SOLENOID

F4 Mode: Input/Output Status Test

2
26 CN11
26 MGND
F 075 Paper Feed Motor When CST3 PCB CN805-4 signal 1 : 20 mm
SCANNING

pADATA1B 1 1 (-) : Darker.

3
DC12

CN703
27
SOLENOID

27 MGND (3rd Paper Tray) level changes to 0V from +5V, 2 : 25 mm

CN10
+24V 2 2 (+) : Lighter.
28 28 +24V 4 activate the Motor. 3 : 30 mm
3 3
LAMP

GND Set the machine to service mode, and press "4" key on the Keypad. 47 Transfer Current Side 2 Adjustment of Transfer Current. -62 - +110
29 29 +24V 076 Paper Feed Roller Clutch When CST3 PCB CN806-2 signal 1 minute 58 U14 Clear 0 : Continue 1
+24V +24V 4 4 0.15uA

CN708
30 1 1 (3rd Paper Tray) level changes to 0V from +24V, 1 : Any Keys
30
Press the "START" key. 48 Transfer Current Envelope Adjustment of Transfer Current. -62 - +110
31
GND
31 ILS
2 +5VP
HDD (Option) clutch operates. 59 Oper. Add Toner Alarm 0 : Stop 0

POWER CORD
DAA1 +24VD1 3 13 1 077 Lift Motor When CST3 PCB CN804-2 signal 0.15uA
32 32 2 +5V 1 : Continue
14 2 Enter the number to activate the test then press "START" key. 49 T Mode Image Density Image density adjustment for Text mode. -99 - +99

THERMAL FUSE THERMOSTAT

MGND 1 +5V (3rd Paper Tray) level changes to 0V from +24V, 60 Auto Tray Selection 0 : No 1
33 33 (-) : Darker.
SENSOR

MGND 15 3 motor rotates in the ascending 1 : Yes

FUSER UNIT
34 GND
WASTE
TONER

34 Press "STOP" key to cancel the test. direction. (+) : Lighter.

nSADFON 16 4 61 TDC Auto Adj. 0 : No 1
COUNTER

PS

AC SW
LEDA 35 35 GND
50 T/P Mode Image Density Image density adjustment for Text/ Photo -99 - +99
PCL

1 1 078 Intermediate Roller Clutch When CST3 PCB CN806-4 signal 1 minute

FUSER LAMP
TONER 17 5 (DEV Conditions) 1 : Yes

CN12
nDADFON
HUMIDITY

LEDB 36 GND mode.

ORIGINAL SIZE

2 2 36 When the "CLEAR" key is pressed, the selected code input will not be accepted. (3rd Paper Tray) level changes to 0V from +24V,
TOTAL
SENSOR

+24V DENSITY +24VM

18
ZCRS
6 62 TDC Auto Adj.(DEV life) 0 : No 0 (-) : Darker.
3
LEDC 3 37 37 1 clutch operates.
MGND SENSOR 19 7 1 : Yes (+) : Lighter.

THERMISTOR
SSR
SENSOR 1

+5V 38 38 KCNT Press "FUNCTION", and "CLEAR" keys simultaneously to exit the service mode. 079 Not Used
4 4 2
WTS 20 8 63 U13 Clear 0 : Any keys 0

E
+5V

CN726
2
1
3
4

51 P Mode Image Density Image density adjustment for Photo mode. -99 - +99
1
2

GND 5 39 39 KEY GND

3 ACSW 080 Paper Feed Roller Clutch When CST2 PCB CN773-2 signal 1 minute 1 : Func + 1

Green
5
1. Check Input

N White
21 9

Black
+5V (-) : Darker.
40 40 COUNTER KCDET +24VD1 (4th Paper Tray) level changes to 0V from +24V,

(CN721)
VINA 6 4

To SPC
6 22 10 64 Dept. Counter (SCANNER) 0 : No 1 (+) : Lighter.
CN710

1
2
3
4
5

1
2
3
4

+5V clutch operates.

7 VOUTA 7 5 F4 Mode (Check Input) 1 : Yes

INLET
L
E
+24VM 52 Not Used
1
2
3
4

CCNT 081 Lift Motor When CST2 PCB CN774-2 signal

8 6 1 1 Message Display 65 Dept. Counter (PRINTER) 0 : No 1
CPWM No. Function Condition Remarks 53 CCD Read Position Adj Adjustment of CCD read position. -42 - +44
1
2
3
4

(4th Paper Tray) level changes to 0V from +24V,

CN702
*1

LEDX 2 2 7 6 5 4 3 2 1 0 1 : Yes

1
2
3
1
2
1
2
1 8 GPWM motor rotates in the ascending 0.2mm
2
1

LEDY 3 3 000 Toner Screw Motor Over Over Current is 1 66-68 Not Used
ORIGINAL SIZE

2 9 direction. 54 T Mode Contrast Adjustment of Contrast for Text Mode. -128 - +127

2
1
N.C.
1
2
3
4
5
6
7
8

Current detected.
nWTBSEN

LEDZ 4 4 69 Reduce N in 1 Space 0 : No 0

CN500
CN719
3 10
TEMPSN

082 Intermediate Roller Clutch When CST2 PCB CN773-4 signal 1 minute 55 T/P Mode Contrast Adjustment of Contrast for Text/Photo Mode. -128 - +127
HUMISN
nTFSEN

+24VM DDCPWM
ELPCNT

AC(N)
AC(N)
AC(N)

AC(N)
LDWTB

nCTCNT

AC(L)
AC(L)
AC(L)

AC(L)
DUPLEX 1 5 5 Power Supply Fan Signal Normal. 0 1 : Yes
TDSEN

+5V
TDREF
+24VM

+24VM
SENSOR 2

+24VM

4 11 (4th Paper Tray) level changes to 0V from +24V,

LDTF

56 P Mode Contrast Adjustment of Contrast for Photo Mode. -128 - +127

GND

GND

nDUXSOL TPWM
GND

GND

+5V

GND SOLENOID 2 6 6 003 Paper Tray Unit Option Unit is installed. 0 70 PM Cycle 0 : No 12
5 12 TC
clutch operates. 57 Not Used
VINX 7 7 Detection Sensor 1 : 1.5 K
083- Not Used

2
1

1
3
2
4

2
6 13 58 Corona Charger Current Adjustment of Corona Charge Current. -77 - +76
10
11
12
13
14
15
16

17
18
19
20

21
22
23
24

CCRMT (2nd Paper Tray) 2 : 2.5 K

1
2
3
4
5
6
7
8
9

VOUTX 8 8 CN5 084

7 14
CN720 +24VM
MGND CN3 CN1 Paper Tray Detection Paper Tray is opened. 0 3: 5K 1.3uA
8 1 1 9 9 085 Paper Feed Roller Solenoid When SPC PCB CN715-6 signal 1 minute
Sensor 4 : 10 K 59 Trail Edge Trans (Trays) Trail Edge Transfer Image High Voltage -30 - +30
+24VM (Sheet Bypass) level changes to 0V from +24V,
2 2 5 : 15 K Timing Adjustment for Trays 1-4 feeding. 0.5mm
(2nd Paper Tray)
3 MGND
3 CN2 CN501 CN502 CN504 CN4 CN6 solenoid operates. 6 : 20 K 60 Trail Edge Trans (Bypass) Trail Edge Transfer Image High Voltage -30 - +30
T401 Paper Tray Detection Paper Tray is opened. 0
MAIN MOTOR

PCHK1 MGND 086- Not Used

1 4 4 7 : 30 K Timing Adjustment for Bypass Tray feeding. 0.5mm
NO PAPER 1

1
2

1
2

1
5
GND GND
Sensor 119 8 : 40 K
CN723

2 2 5 5 (1st Paper Tray) 61 Trail Edge Trans (2-Sided) Trail Edge Transfer Image High Voltage -30 - +30
SENSOR
M

LDPSEN
3 3
+5V +24V 120 Lamp When SPC PCB CN656-3 signal 9 : 60 K Timing Adjustment for the 2nd side of 0.5mm
6 6 10 1 1 NP Sensor Paper is not detected. 1
UPLIMIT nMMON nFNRDTP PS/LSU level changes to +5V from 0V, 10 : 80 K 2-Sided printing.
UPPER 1 4 7 7 11 2 2 (Sheet Bypass)
CN717 GND nMMCK Lamp operates. 11 : 90 K
LIMIT 2 5 8 8 12
MGND
3 3 FAN Paper Length Sensor Sensor is activated. 1 62 TDC Gain Voltage Adjust Adjustment of Toner Density sensor gain -10 - +10
LDUPLSEN F/R 121- Not Used 12 : 120 K
SENSOR 3 voltage. 0.033V
10
11
12
13
14
15
18
17
16
19
20
21
22

(Sheet Bypass)
CN709

6 9 9
1
2
3
4
5
6
7
8
9

nMMRDY 159 13 : 150 K

1
CASET
7 10 10 Size Sensor (PC1) Sensor is activated. 1 14 : 200 K 63 Lead Edge Read Timing Adjustment of Lead Edge Read Point. 0 - +9
1st TRAY 160 ADF Paper Feed Motor Rotating ADF paper feed motor rotates at
C

nPRGDWN

(Adjustment for Double Exposure 0.5mm

nSCNWUP

GND
nDUPACK

nPVSYNC

pSPCRST

2 (Sheet Bypass) 15 : 240 K

pSENTIM

DETECTION 8
nDUREQ

SPCRXD

(35% speed rotating) 35% speed.

SPCTXD

LDCSTSEN Copy Mode, for details, and

pVREQ

nSREQ
nPRDY
nVRDY

IICSDA
nPACK

nSACK

IICSCL

SENSOR 3 9 Size Sensor (PC2) Sensor is activated. 1 71 Add Toner Time Limit 0 : Unlimited 0
pBDA
nATT

161 ADF Paper Feed Motor Rotating ADF paper feed motor rotates at adjustment procedure, refer to
GND
GND

GND

CH48TA

CH35TA
LIFT MOTOR

RSEN (Sheet Bypass) 1 : 1/3 Limited

REGISTRATION 1 10 (100% speed rotating) 100% speed. Service Manual Sect. 3.9.8.)

*2
GND

COIL

COIL
ROLLER 2 11 004 Size Sensor (PC3) Paper is not detected. 0 2 : 2/3 Limited
CN706

1st TRAY

162 ADF Paper Feed Motor Rotating ADF paper feed motor rotates at

G
+24VM

D
64 Side Edge Read Adjust Adjustment of Side Edge Read Point. 0 - +9

TRANSFER T
1 (Sheet Bypass)
M

SENSOR 3 LDRRSEN
(200% speed rotating) 200% speed. 72-75 Not Used
10
11
12
13
14
15
18
17
16
19
20
21
22

12 LIFT1 (Adjustment for Double Exposure 0.5mm

1
2
3
4
5
6
7
8
9

2
ADU Detection Sensor Unit is connected. 0 76 TH Sensor (Corona, Grid) 0 : No 1
CN53 163 ADF Paper Feed Motor Reverse ADF paper feed motor rotates in Copy Mode, for details, and

PROCESS
13 LDSSN
1 1 JAM Access Cover Open Cover is open. 0 Rotating reverse at 35% speed. 1 : Yes adjustment procedure, refer to
14 1 nA3SEN Detection Sensor 77 TH Sensor (Bias DC) 0 : No 1
2 2 (35% speed rotating) Service Manual Sect. 3.9.8.)
SPC

UNIT
CN42

GND (2nd Paper Paper Tray) 1 : Yes

SSN 3 164 ADF Paper Feed Motor Reverse ADF paper feed motor rotates in 65 Transfer Current Side 1 (Factory use only) -20 - +20
CN727

1 3 3
4 4
nB4SEN
4 Upper Limit Sensor Upper Limit is detected. 1 Rotating reverse at 100% speed. 78 A4/LTR Size Select 0 : No 0 (Small Width) 0.15uA

AC(N)
2

AC(L)
5 nA5SEN (2nd Paper Tray) (100% speed rotating) 1 : Yes 66 Transfer Current Side 2 Transfer Current -20 - +20
3 5 5
nPEDSEN Upper Limit Sensor Upper Limit is detected. 1 165 ADF Paper Feed Motor Reverse ADF paper feed motor rotates in 79 Not Used (Small Width) 0.15uA
CN2 BYPASS FEED 1 6 6
(1st Paper Tray)

1
2
GND Rotating reverse at 200% speed. 80 Paper Size Priority 1 : A3 3 (for Europe) 67 ADF Image Density Compensation of ADF image density. -99 - +99
CN712

L5V
NO PAPER 2 7 7
1 8 1
+5V GND SENSOR 3 8
LDPED CN171 NP Sensor Paper is not detected. 0 (200% speed rotating) 2 : B4 13 (for USA / Canada) 68 Paper Loop (Tray 3) Individual Fine Adjustment for Tray 3 -99 - +99
Dehumidifier Heater (Option)

20 20 7 2 8
LSU

2 (2nd Paper Tray)

CN1

3 : A4
RLB
FSH S/H
nDUPSEN 166 ADF Paper Feed Roller Clutch 1 When ADF PCB CN22-10 signal 69 Stamp Position Adjust Adjustment of verification stamp position. -50 - +50
CN728

19 19 3 6 3 1 1 1 9 4 : A4-R
nPHY1 DUPLEX GND NP Sensor Paper is not detected. 0 level changes to 0V from +24V, 0.3mm
18 18 1
+3.3V HSYNC
2 2 2 10 5 : B5
4 1 4 5 4 SENSOR LDDUX (1st Paper Tray) clutch operates for 3 seconds.
CN57

pPHY1 GND LDEN 3 3 11 70 Not Used

17 17 2 3 2 5 4 5 3 CN172 CN173 005 Total Counter Detection Counter is not detected. 1 167 ADF Paper Feed Roller Clutch 2 When ADF PCB CN22-8 signal 6 : B5-R
nPHY2 nOPDUP 71 ADF Read Main Scan Pos. Adjustment of ADF horizontal image read -99 - +99
4 12 7 : A5
CN701

LDI+
16 16 3 2 3 6 3 RETRACE 6 GND Sensor level changes to 0V from +24V,
(Reverse Side) start position. 0.05mm

1
2

1
2
pPHY2 LDI- GND 5 13 8 : A5-R
15 15 4 1 4 7 2 7 nHFPESEN Polygon Motor Lock Signal Normal. 0 clutch operates for 3 seconds.
nPHYR 1 14 9 : 8 x 13 72 Original Lead Edge ADF Adjustment of ADF Original Lead Edge -99 - +99
14 14 8 1 POWCNTV 8 BYPASS FEED
1
GND Main Motor Lock Signal Normal. 0 168 ADF Paper Feed Roller Clutch 3 When ADF PCB CN24-2 signal
pPHYR PMCK 2 2 15 10 : 8.5 x 13 (Reverse Side) 0.3mm
level changes to 0V from +24V,
CCD

13 13 1 1 9 SENSOR Fuser Fan Lock Signal Normal. 0

nPHYCP 3 3
LDHFPE 16 11 : LEDGER 73 Original Trail Edge ADF Adjustment of ADF Original Trail Edge -127 - +127
12 12 PMRDY clutch operates for 3 seconds.
MOTOR

2
CN850

2 10 Toner Waste Container Toner Waste Container 0 12 : LEGAL (Reverse Side) 0.3mm
CN55

pPHYCP PMON 169 ADF Paper Exit Solenoid When ADF PCB CN26-2 signal
M

11 11 Detection Sensor is detected. 13 : LETTER

1
2
1
2

3
1
2

1
2
3 11 74 Stamp Position Adjust Adjustment of Stamp Position -50 - +50
LSU

GND MGND level changes to 0V from +24V,

10 10 4 4 12
+24VM
1 REGISTRATION Toner Waste Container Toner Waste Container 1 14 : LETTER-R (Reverse Side) 0.3mm
GND +24VM RRCLCNT ROLLER Solenoid operates for 3 second. 15 : INVOICE
9 9 5 5 13 2 Full Detection Sensor is full. 75-76 Not Used
AGND 1 CLUTCH 170- Not Used 81 B4/FLS Size Selection 0 : B4 0
8 8 CN3 Toner Bottle Motor Lock 0 77 Add Toner Level Adjustment of Toner supply (Not Use) -1 - +1
1
2

1
2

1
2

1
2
+12V 171 1 : 8 x 13
7 7 2 +24VM
1 Rotation Detection Sensor 1
CN715

AGND PFCLCNT PAPER FEED 006 ADU Paper Sensor Paper is detected. 0 172 ADF Solenoid When ADF PCB CN26-5 signal 2 : 8.5 x 13
6 6 3 2
CLUTCH level changes to 0V from +24V, 78 Paper Loop (Tray 4) Individual Fine Adjustment for Tray 4 -99 - +99
AGND Fuser Exit Sensor Paper is detected. 0 82 Manual Skyshot Mode 0 : Off 0
AC SW

5 5 4 Solenoid operates for 1 second.

+24VM 1 : M1, On 79 MTF Adjust Adjustment of Scanning Sharpness by digital -2 - +2
1
2

1
2

1
2
AGND 5 Registration Sensor Paper is detected. 0
4 4 HFSOL 1 BYPASS FEED 173 ADF Inverting Solenoid When ADF PCB CN26-3 signal 2 : M2, On image processing for Text /Photo Copy Mode. 1
VOUT1 6 (2nd Paper Tray)
3 3 2 SOLENOID level changes to 0V from +24V, 3 : M1, M2, On 80 Laser Power Control -99 - +99
2
AGND
2 Registration Sensor Paper is detected. 0 Solenoid operates for 1 second. (Read Only)
83 Digital Skyshot Mode 0 : No 1
1
VOUT2
1 008 Front / Left Cover Open See Remarks. * Front / Left Cover is 174 ADF Pinch Roller Solenoid When ADF PCB CN26-7 signal 1 : Normal 81 Grid voltage Control -99 - +99
MCCDHT

Sensor 1 closed. (Factory use only)

CCDHT

level changes to 0V from +24V,

LSUHT

2 : Quality (Read Only)

Signal 1 = 0 Solenoid operates for 1 second. 84 Paper Tray Priority 0:S>C>B 1 82 Bias DC Voltage Control -99 - +99
Signal 2 = 0
175 ADF Stamp Solenoid When ADF PCB CN25-2 signal 1:C>S>B (Read Only)
Right Cover is open.
CST4HT

CST2HT
CST3HT

level changes to 0V from +24V, 85 Side Void Setting (ADF) 0 : None 0 83 Temperature Sensor Value Value of Temperature sensor. 0 - 255
Signal 1 = 1 Solenoid operates for 1 second.
Signal 2 = 1 1 : Yes (Read Only)
Developer Unit Detecting Unit is connected. 1 86 PM Cycle (Optics) 0 : No 0 84 Humidity Sensor Value Value of Humidity sensor. 0 - 255
Sensor 1 : 40 K (Read Only)
THERM1
1 1 THERMISTOR 2 : 60 K 85 Not Used
009 JAM Access Cover Open Cover is open. 0
(TMIS)
F5 Mode: Function Parameters (For Copier)
THERM2
FDPCHK3 2 2 3 : 120 K 86 ADF Reverse Stop Posi. Adjustment of ADF reverse stop position. -99 - +99
CN803

1 +24VM 1 1 nHEXSEN Detection Sensor

1 1 GND REGISTRATION 3 3 1 4 : 240 K 0.3mm
2 MGND 2 2 PAPER EXIT (4th Paper Tray)
2 2 GND 2 5 : 360 K
1
+24VM
3 3 LDFPCHK3 3 SENSOR 4 4 Paper Tray Detection Paper Tray is not 0 Set the machine to Service Mode, and press "5" key on the Keypad. 87 ADF Exhaust Stop Posi. Adjustment of ADF exit stop position -99 - +99
MGND 3 +5V
3 LDHEX 3 SENSOR 6 : 480 K
0.3mm
5 5 Sensor connected.
CN721

2 4 GND 7 : 600 K
+5V 4 4 6 6 (4th Paper Tray) 88-89 Not Used
3 5 OP3RST 1
CST3
1 Press the "START" key. 87 PM Cycle (ADF) 0 : No 0
3rd TRAY
CN801

GND 5 5 7 7 Upper Limit Sensor Upper Limit is detected. 0 90 ADF Image Read Start Adjustment of ADF horizontal image read -99 - +99
6 OP3FLT GND 2 1 : 40 K
4 2 DETECTION
CN772

6 6 8 8 (4th Paper Tray) start position. 0.05mm

OP3FLT 3 Enter the desired code number, or press "V", "/\" arrow keys. 2 : 60 K
B

7 OP3FCK LDCST3 SENSOR

5
CN807

7 7 3
OP3RST 9 Paper Tray Detection Unit is connected. 0 3 : 120 K 91 Original Lead Edge ADF Adjustment of original detection timing. -99 - +99
6 8 OP3FDT 4
OP3FOT 8 8 10
+24VFL
1 1 Sensor If you wish to select another code number, scroll the menu with the arrow keys. 4 : 240 K 0.3mm
7 9 OP3ENB (4th Paper Tray)
CN770

9 nFNRDT 5 : 360 K 92 Original Trail Edge ADF Adjustment of trail edge detection timing. -127 - +127
OP3FCK 9 JAMDOR3 11 2 2 REAR FAN
CN802

8 10 OP3FLD 1 1 Feed Motor Lock Signal Normal. 0 6 : 480 K 0.3mm

OP3FLD 10 10 GND JAM COVER 12 MGND 3 3 Press the "SET" key.
9 11 OP3FDIN 2 2 (3rd Paper Tray) 7 : 600 K 93 ADF 100% Image 1-Sided Adjustment of magnification for 1-sided. -9 - +9
OP3ENB 11 11 LDJAM3 OPEN SENSOR
10 12 3 3 Paper Tray Detection See Remarks. * Unit is connected. 0.1%
12 12 Enter the desired function code number, and press "SET" key. 88 USB Port Function 0 : Off 0
OP3CLK
11 13 13
+24VM Sensor 2 Signal 1 = 1 1 : Once 94 ADF 100% Image 2-Sided Adjustment of magnification for 2-sided. -9 - +9
OP3FDIN 13
12 14 +24VM (3rd Paper Tray) Signal 2 = 0 2 : ON 0.1%
M
GND
+24VM 14 14 1 1 TONER BOTTLE When the "CLEAR" key is pressed, the selected code input will not be accepted.
15 BMCNT A different signal
CN810

89 LAN Speed/Duplex 0 : Auto 0

CN707

25 1 2 2 MOTOR 95-96 Not Used

MGND Paper Tray Detection See Remarks. *
26 16 2
pattern, indicates that 1 : 10 Half
Sensor 1 Press "STOP" key, then press "FUNCTION", and "CLEAR" keys simultaneously to exit the service mode. 97 (Factory use only)
17 the unit is not 2 : 10 Full
3 (3rd Paper Tray) 98 Not Used
connected, or CST 3
M
+24VM 3 : 100 Half
18 3 1
SMCNT TONER MOTOR PCB is defective. Reboot the machine after setting the parameter(s) to activate the setting(s). 99 F5/F6 Initialization Initialize F5/F6 parameter settings.
4 2 4 : 100 Full
CN722

PCHK2 PCHK3 010 Registration Sensor Paper is detected. 0 90 TCH Panel Beep Sound 0 : Off 1
13 ADF2
1 1 1 1 F5 Mode
1 BTHP (3rd Paper Tray) 1 : Soft
NO PAPER NO PAPER
F7 Mode: Electronic Counter
MRCLH2 GND GND 5 1 TONER BOTTLE 1 No. Item Function Default Setting
14 2 2 2 2 2 GND JAM Access Cover Open Cover is open. 0 2 : Loud
CN775

SENSOR LDPHK3 SENSOR

CN800

LIFT2 LDPHK2 3 3 6 2 HOME POSITION 2 00 Not Used

15 3 3 3 LDBTHP Detection Sensor 91 M1, Size Y Set the default size for Manual Skyshot 160
SC

PCHK2 7 3
16 4 4
UPLMT2
1 4
UPLIMIT3
1
SENSOR 3 (3rd Paper Tray) 01 Frequency Desired 0 : Auto 1 (for Europe)
92 M1, Size X Mode, M1, and M2. 70
CST2 GND UPPER LIMIT UPPER LIMIT 8 1 : 50 Hz Set the machine to Service Mode, and press "7" key on the Keypad.
GND 4
CN66

17 5 5 2 5 2 Paper Tray Detection Paper Tray is 1 93 M2, Size Y 220

UPLIMIT2 LDUPL2 SENSOR LDUPL3 SENSOR 9 2 : 60 Hz 2 (for USA / Canada)
CN771

18 6 6 3 6 3 5 Sensor connected.
94 M2, Size X 95 Press the "START" key.
FDPCHK2 10 6 (3rd Paper Tray) 02 Not Used
19
CN73

CN74

CN75

7 95 Paper Size (FA) 1 (for USA / Canada)

03 LSU Startup Speed 0 : Low 1
CST3

JAMDOR2 FDPCHK2 7 Upper Limit Sensor Upper Limit is detected. 0

CN776

20 8 1 1 2 (for Europe) Enter the desired code number, or press "V", "/\" arrow keys.
CSTOP GND REGISTRATION 8 (3rd Paper Tray) 1 : Full
21 9 2 2 96 Bypass Detection (FA) 1 (for USA / Canada)
LDFPCHK2 SENSOR NP Sensor Paper is not detected. 0 04 LSU Off Timer 1 : 5 sec. 3 (Factory use only)
22 10 3 3 2 (for Europe) If you wish to select another code number, scroll the menu with the arrow keys.
+24VM 3rd TRAY (3rd Paper Tray) 2 : 10 sec.
23 11 1 3 : 15 sec. 97 BP Tray B4/FLS/LGL (FA) 0 (for Europe)
MGND nCST2 LIFT MOTOR Registration Sensor Paper is detected. 0 Press the "SET" key.
24 12 1 1 2 4 : 20 sec. 3 (for USA / Canada)
2nd TRAY 18 (4th Paper Tray)
CN777

GND +24VM

M
PCHK4 3 6 : 30 sec. 98 TH Sensor (Laser Power) 0 : No 1
HARDWARE

2 2 DETECTION 1
CN804

nLIFTM3 17 1 1 NP Sensor Paper is not detected. 0

LDCST2 3 SENSOR 2 GND NO PAPER 4 8 : 40 sec. 1 : Mid Enter the desired function code number, and press "SET" key.
3 (4th Paper Tray)
CN69

CN68

CN67

1 2 2
CN775

10 : 50 sec. 2 : Large
CN774

2nd TRAY +24VM SENSOR 5

M
4 LDPHK4
LAN I/F

1 3 011 Corona Leak Detection Leak 0

KEY I/F

2 3 12 : 60 sec. When the "CLEAR" key is pressed, the selected code input will not be accepted.
CN61

LIFT MOTOR LIFTM2

2 UPLMT4 6 99 Not Used
+24VM
3 4 1 020 Size Sensor C Original detected on 1 Z
05 Not Used
JAMDOR2 1 GND UPPER LIMIT
CN778

1 1 MGND 7 (Not Used) the C position.

4 5 2 Press "STOP" key, then press "FUNCTION", and "CLEAR" keys simultaneously to exit the service mode.
GND JAM COVER 2 LDUPL4 SENSOR 8 Y Platen 06 Job Tracking Server 0 : No 0
2 2 +5V 6 3 Size Sensor B Original detected on -
3 LDJAM2
3 OPEN SENSOR 3 5
9 (Not Used) the B position.
1 : Yes
F6 Mode: Adjust Parameters (For Copier)
CN770

GND X
PAPER FEED 1 +24VM 6 C B A
07-08 Not Used Reboot the machine after setting the parameter(s) to activate the setting(s).
1 4 10
N.C. FDPCHK4 Size Sensor A Original detected on 1
CN776

2 ADF2 1 1
MEMORY

CLUTCH 2 5 7 Front Side 09 Fuser Lamp Control 0 : Off 0 (for USA / Canada) F7 Mode
REGISTRATION (Not Used) the A position.
CN773

N.C. GND 11 Set the machine to Service Mode, and press "6" key on the Keypad.
FROM

2
CARD
SORT

2 1 : Auto 1 (for Europe)

SLOT 1
SLOT 2

3 6 8
FRM

FRM

LDFPCHK4 SENSOR 12 Size Sensor Z Original detected on 1 No. Item Remarks

CN65

CN63

CN62

CN64

N.C. 3 3
4 7 9 (Not Used) the Z position. 10 Exit Tray Limitation 0 : None 0 01 Key Operator ID Code Key Operator's identification code for access to the
DRIVE MOTOR

+24VM N.C. Press the "START" key.

CST2

+24VM 5 1 1 (Up to 250 Sheets) 1 : Accumulate

INTERMEDIATE 1 8 10 Size Sensor Y Original detected on 1 counter mode.
CN805

MGND N.C.
MRCLH2 2 2 11 2 : Job 02 Total Count Total count for all copies / prints.
ROLLER CLUTCH 2 N.C. 9 1
CST4
1 (Not Used) the Y position. Enter the desired code number, or press "V", "/\" arrow keys.
CN777
3rd TRAY

3 3
10
N.C.
12 GND 4th TRAY USB I/F Size Sensor X Original detected on 1
11 Replace Drum 0 : Off 0 03 PM Count Preventive Maintenance count.
P/S 2 2 DETECTION
4 4 13 (Not Used) the X position. 1 : On
11 04 Scanner PM Count PM count for scanner readings.
*1

LD 5 N.C. 3 LDCST4 3 SENSOR If you wish to select another code number, scroll the menu with the arrow keys.
5 Replace Drum 0 : Off 0
CN808

CST2

12 14 021 Home Position Sensor Home position is 1 05 Not Used

4 (Except USA / Canada)
N.C. 1 : User (Displays Replace Drum)
25
N.C.
15 CN50 detected.
2 : Service (Enables Check & Call
Press the "SET" key. 06 OPC Drum Count PM count of recording paper fed through the OPC
to PNL1

1 26 16 JAMDOR4 ADF/Platen Cover Open ADF/Platen Cover is 1 Drum.

function)
CN778

ADF4 1 1
2 13 1 GND JAM COVER Sensor open. Enter the desired function code number, and press "SET" key. 07 Process Unit Count PM count of recording paper fed through the
12 Printer Fan Extension 0 : Non 5
*1

+24VM 2
nBZH1GH5

3 1 1 MRCLH4 2
PAPER FEED OPEN SENSOR ADF/Platen Cover Angle ADF/Platen Cover is 1 Process Unit.
pBZCLK5

14 2 LDJAM4 2 : 2 min
pSPENB

ADF3 3 3
2 2
CN806

4 LIFT4 Sensor open more than 30

CLUTCH 15 3 5 : 5 min When the "CLEAR" key is pressed, the selected code input will not be accepted. 08 ADF PM Count PM count of originals fed through the ADF.
GND

3 16 PCHK4 angle. 09 Not Used

4 13 Paper Out Red Indicator 0 : On 0
4 CST4 Fuser Lamp Disconnect No Lighting - Press "STOP" key, then press "FUNCTION", and "CLEAR" keys simultaneously to exit the service mode.
17 5 1 : Off 10 Developer Count PM count of recording paper fed through the
CN771

LIFTM4 Detection Sensor

INTERMEDIATE 1 +24VM 5
CN774

UPLIMIT4

M IMPORTANT SAFETY NOTICE

18 6 2 4th TRAY 14 Paper Size Tray 1 0 : None 1 (for Europe) Developer.
CN393

SPEAKER
1
2
3
4

pSPKOT MRCLH3 +24VM +24V Line Error Detecting +24V Line is ON. -
ROLLER CLUTCH 2 FDPCHK4 1 Reboot the machine after setting the parameter(s) to activate the setting(s). 11 Sheet Bypass Count Total count of paper fed from the sheet bypass.
CN394 1
GND
1 19 7 LIFT MOTOR Signal
1 : A3
2 2 20
JAMDOR4
8 PARTS WITH A MARK ON THIS SCHEMATIC 2 : B4 11 (for USA / Canada) Note: 12 1st Paper Tray Count Total count of paper fed from the 1st paper tray.
030 ADF B1 Sensor Original is detected. 1
A

CSTOP4 3 : A4 The Factory Setting is different in each model.

21 9 DIAGRAM INCORPORATE SPECIAL FEATURES 13 2nd Paper Tray Count Total count of paper fed from the 2nd paper tray.
1 ADF B2 Sensor Original is detected. 1 4 : A4-R
22 10 IMPORTANT FOR SAFETY. 5 : B5 F6 Mode 14 3rd Paper Tray Count Total count of paper fed from the 3rd paper tray.
+24VM 2 ADF Paper Exit Detection Original is detected. 1
CN811

80 80 1 23
MGND
11 WHEN SERVICING, IT IS ESSENTIAL THAT ONLY Sensor 6 : B5-R No. Item Remarks
Setting 15 4th Paper Tray Count Total count of paper fed from the 4th paper tray.
79 79 2 24 3 Range 16 2-sided Count Total count of 2-sided Print.
12 MANUFACTURER'S SPECIFIED PARTS ARE USED FOR ADF Inverting Cover Open Cover is open. 1 7 : A5
FXB

CN21

+5VP 3 4 8 : A5-R 17 ADF Count Total count of originals fed through the ADF.
1 1 THE CRITICAL COMPONENTS IN THE PARTS Detection Sensor 00 Adj 100% Side-Side Read Adjustment for identical vertical (side-to-side) -9 - +9 0.1%
CN80

CN390

GND
MJR

2 5 9 : 8 x 13 size ratio.
2 ADF Cover Open Cover is open. 1 18 ADF Read Count Total count of originals scanned through the ADF.
IDENTIFIED WITH A MARK IN THE SCHEMATIC.
EXT. TEL
CN391

+24V 3 6 10 : 8.5 x 13 01 Adj 100% Lead-Tail Read Adjustment for identical horizontal -9 - +9 0.1% 19 Scanner Count Total count of scanning operations.
CN772

3 Detection Sensor
CN25

pCMLD 4 7 11 : LEDGER (top-to-bottom) size ratio.

4 ADF Detection Sensor 1 See Remarks. * iADF 20 Scanner Read Count Total count of scanner readings.
nHKOF 8 12 : LEGAL 02 100% Selection Adjustment from 99.1% to 100.9% -9 - +9 0.1%
2 2 5 5 *1: Japan Specification Only Signal 1 = 1 21 Copy Print Count Total count of copies printed.
FAX (Option)

nCTON +24VM 9 13 : LETTER

1 1 6 Signal 2 = 1 03 Original Registration Adjustment of platen original registration -30 - +30 22 Copy Scan Count Total count of copies scanned.
6 PAPER FEED 1 1 14 : LETTER-R
AGND 10 *2: Europe Specification Only detection timing. 0.2mm
CN20

7 7 ADF4 ADF 15 : INVOICE 23 PC Print Count Total count printed from PC.
CN773

CLUTCH 2 2 11 Signal 1 = 1 04 Printer Registration Delay time is adjusted from registration -50 - +50
L2 3 ADF Detection Sensor 2 See Remarks. * 15 Paper Size Tray 2 Same as F5-14 24 PC Scan Count Total count scanned to PC.
CN392

Signal 2 = 0
CN22

1
L1
1 LINE 4
12
13 ..... 120/220-240 VAC Line A different signal 16 Paper Size Tray 3 Same as F5-14 (for DP-8020E/8020P)
05 Main Motor Speed
roller clutch ON.
Adjustment of Main Motor speed.
0.5mm
-10 - +10
25 Fax Transmit Count Total count of Fax transmitted.
3 3
INTERMEDIATE 1 +24VM 5 ..... +24 VDC Line pattern, indicates 17 Paper Size Tray 4 Same as F5-14 (for DP-8020E/8020P) 0.1% 26 Fax Receive Count Total count of Fax received.
14
ROLLER CLUTCH 2 MRCLH4 ..... +12 VDC Line that the unit is not 18 Not Used 27 Fax Print Count Total count of Fax printed.
06 Polygon Motor Speed Adjustment Polygon Motor speed. -5 - +5 0.1%
..... +5 VDC Line connected. 19 T Corona Current Auto Adj. 0 : No 1 28 Total OPC Rotation Time Total Time of OPC Rotation.
07 Registration Void Registration void should be adjusted. 0 - +99
..... +3.3 VDC Line 031 ADF Original Sensor Original is detected. 1 1 : Yes 0.5mm 29 A4/LT Count Total count of A4 / Letter Print.
ADF Original Width Sensor Original is detected. 1 20 ADF 0 : No 1 30 A4R / LETTER-R Count Total count of A4-R / Letter-R Print.
08 Trail Edge Read Timing Adjustment of trail edge void. -9 - 0
ADF Original Width Sensor Original is detected. 1 1 : Auto 0.5mm 31 A3 / Ledger Count Total count of A3 / Ledger Print.
ADF Original Length Original is detected. 1 21 Not Used 09 Trail Edge Print Timing Adjustment of trail edge void. -9 - +15 32 B4 / LEGAL Count Total count of B4 / Legal Print.
Sensor 2 22 System Console 0 : No 1 0.5mm 99 All Counter Clear All counters are cleared.
ADF Original Length Original is detected. 1 1 : Auto (for DP-8020E/8020P) 10 Side Adjust (Bypass) Adjustment of LSU side-side (Sheet Bypass). -8 - +7
Sensor 1 23-25 Not Used 0.5mm
26 2-Sided Unit 0 : No 1 11 Side Adjust (Tray 1) Adjustment of LSU side-side (1st Tray). -8 - +7
1 : Auto 0.5mm
27-30 Not Used
1

4
F8 Mode: Service Adjustment Service Modes (For Facsimile) No. Parameter
Function Parameter Table
Selections Function Error Codes (For Copier) Code
Jam Error Codes (J Code) Table
Contents Section
Information Codes Table (For Facsimile) Code Mode Phase
Fax Information Codes
Description of Problem Possible Cause(s)
038 Not Used The self-diagnostic functions detect troubles in the important components of the copier. J78 The Duplex Eject Sensor keeps detecting paper within a predetermined time after A Fax Information Codes 719 RCV LAN Received data via LAN is in a Ask the originator to resend with a
Set the machine to Service Mode, and press "8" key on the Keypad. Caution: (i-ADF
The factory default parameters are preset (destination dependent) for optimum performance, and in 039 Flash Time 5 = 50 ms Selects the pause interval before activating the When any trouble occurs, the copier stops. 2-Sided Scanning. Code Mode Phase Description of Problem Possible Cause(s) format that is not supported. supported file attachment:
compliance with the local telecommunication regulations/standards, and do not need to be changed. ~ Flash key. only) 012 RCV C, D The length of the received * In a TIFF-F format.
Press the "START" key. J79 The Read Point Sensor keeps detecting paper in the ADF. A * Image data conforming to A4/Letter
Changing some of these parameters may cause the unit to be no longer compliant, or become
inoperable. 040 Flash Time
100 = 1000 ms
5 = 50 ms Selects the pause interval before activating the User Error Codes (U Code) J92 The Read Point Sensor does not detect paper in the ADF. 030 XMT B
document is over 2 m.
Read Point Sensor does not Document not set properly.
size.
Enter the desired code number, or press "V", "/\" arrow keys. (PSTN) ~ Flash key. J93 The paper remained in the ADF. 720 POP LAN Unable to connect to the POP Incorrect POP Server address set.
Note: activate within 4 seconds after Defective Read Point Sensor.
100 = 1000 ms (For Germany, Austria, and Czech) Uxx, and a message will appear on the Panel Display. the document starts feeding. Server. POP Server is down.
J94 The ADF does not go off after the predetermined time.
If you wish to select another code number, scroll the menu with the arrow keys. 721 POP LAN Unable to login to the POP Server. Incorrect User Name, or Password set.
Fax Service Mode Procedure 041 Pause Time 1 = 1 sec.
~
Selects the pause interval from 1 sec. ~ 10 sec. for
dialing through a switchboard, or for international User Error Codes (U Code) Table
Unexpected Jam timing (i.e. Original is too short, Ledger / A3 size original is fed
without being recognized that the length is abnormal for a Fax Transmission, etc.)
031 XMT
COPY
C Transmitting document was longer Document may be jammed.
than 2,000 mm (78.7 in). Defective Read Point Sensor. 722 RCV LAN Failed to obtain the Network DHCP not available.
Press the "SET" key. 10 = 10 sec. calls. Code Item Possible Cause(s) (Super Fine: 1,000 mm (39.4 in), Parameters (such as: IP Address, (Contact the Network Administrator.)
1. To enter the Fax Service Mode
Enter the desired function code number, and press "SET" key.
a. Press "FAX/EMAIL" key.
b. Press "FUNCTION", and then "7" keys.
042 Not Used
043 Redial Interval 0 = no waiting Selects the redial interval from 0 to 15 minutes in 1
U00 Key Counter 1. Card Key not installed.
2. Key Counter Harness disconnected. Mechanical Error Codes (E Code) 061 - A
600 dpi: 430 mm (16.2 in))
ADF Door is open. Cover not firmly closed.
Subnet Mask, Default Gateway
IP Address, etc.) from the DHCP
~ minute steps. 3. Department Code not assigned. Connectors not firmly connected. server.
c. Press "MONITOR" four times, then press "*". E1: Optical Unit Error
When the "CLEAR" key is pressed, the selected code input will not be accepted. 15 = 15 minutes U01 Close Front Cover 1. Front Cover / Side Cover open. 200 RCV C Decoding process did not Defective FXB PCB. 725 XMT LAN DNS Server connection timed out. Incorrect DNS Server address set.
d. Enter the desired code number, or press the "V", "/\" arrow keys. Code Function Possible Cause(s)
044 Redial Count 0 = no redial Selects the redial count from 0 to 15 times in 1 step 2. Front Cover / Side Cover Sensor disconnected. complete at the end of phase C. POP DNS Server is down.
Press "STOP" key, then press "FUNCTION", and "CLEAR" keys simultaneously to exit the service mode. 3. Front Cover / Side Cover Sensor defective. E1- 01 Abnormal Platen Glass 1. Home Position Sensor connector disconnected.
~ intervals. 212 XMT A-E Interface error occurred between Modem defective. (FXB PCB) 726 XMT LAN Received an error response from Incorrect POP Server address set.
2. To exit the Fax Service Mode 4. PS connector disconnected. Scanning 2. Home Position Sensor defective.
15 = 15 minutes Note: RCV the CPU, and modem. Software problem occurred. (SC PCB) POP the DNS Server. Incorrect SMTP Server address set.
Press "STOP" key. In order to comply with the requirements TBR21 5. PS defective. 3. Scanner Motor connector disconnected.
Reboot the machine after setting the parameter(s) to activate the setting(s). 727 XMT LAN Remote Internet Fax Errors: Busy, or
6. SPC PCB connector disconnected. 4. Scanner Motor defective. 301 XMT System fault. Software problem occurred. (SC PCB) Received an Error, or No
Note: 0 ~ 9 (For Australia Only) in the EC countries, do not select 15 times. Job Number Overflow for Relay XMT.
7. SPC PCB defective. 5. Scanning Mechanism defective. RCV Response from the Remote
F8 Mode The following buttons provide these functions in the Service Mode: 045 Ring Detect 1 = 1 ring Selects the ring detection count from 1 to 9 rings in (Retry is possible)
6. SPC PCB connector disconnected. 331 XMT C 8-minutes timer error. Internet Fax.
Count ~ 1 ring step intervals. U07 Close Feed Cover 1. Feed Cover open.
No. Item Remarks "START" : The new setting value is stored in the machine.
2. Feeder Unit incorrectly installed.
7. SPC PCB defective. (Germany only) 728 XMT LAN (SMTP Direct XMT) Remote Internet Fax Errors: Memory
00 Exp. Lamp replacement When replacing the exposure lamp. "V” : Scroll the function parameter number down. 9 = 9 ring 8. PS defective. Overflow, or No Power.
3. Feeder Unit connector disconnected. 400 XMT B T1 timer (35 5 sec) elapsed Wrong number dialed, and the START
Procedure: "/\“ : Scroll the function parameter number up. 046 On-Hook 0 = 0 sec. Selects the on-hook time between sequential E1- 20 Laser Unit Horizontal 1. LSU connector disconnected. without detecting 300 bps signal. button was pushed. (Retry is not possible)
4. Feeder Unit Sensor disconnected.
a) Press the Start key to move the exposure lamp to ~ communication calls in 1 second step intervals. Synchronization 2. LSU defective. Telephone line disconnected while 729 XMT LAN
Failed to authenticate (SMTP SMTP AUTHENTICATION, User Name,
5. Feeder Unit Sensor defective.
the position (approx. 250 mm from the optics 90 = 90 sec. 3. SPC PCB connector disconnected. dialing. AUTHENTICATION) when and/or Password are incorrect.
6. PS connector disconnected.
home position) where it can be replaced. 047 Response Wait 1 = 1 sec. Selects the waiting interval for the response after 7. PS defective. 4. SPC PCB defective. FXB PCB (Modem), or MJR PCB connecting with the SMTP server. (Contact the Network Administrator.)
b) To return the optical system to the home position,
press the CLEAR key.*
FAX Service Mode Table Interval ~
90 = 90 sec.
completing the dialing. 8. CST2/CST3 PCB connector disconnected. E1- 22 Polygon Motor Synchronization 1. Polygon Motor connector disconnected.
2. SPC PCB connector disconnected.
defective.
Receiver defective. (It may only be
730 RCV LAN Unable to program the Internet Verify that the Fax Parameter #158 is
The following service modes are provided to assist you in setting operational functions of the unit, and 9. CST2/CST3 PCB defective. parameters or the autodialer via set to Valid.
01-05 Not Used determining the condition of the unit. U13 Add Toner 1. Toner Bottle incorrectly installed. 3. LSU connector disconnected. transmitting CED) Email from a PC.
06 Error Log Print/View a) Each time the arrow key is pressed, the machine 20 ~ 150 sec. 4. Polygon Motor defective. 401 XMT B DCN was returned from receiver Your machine's ID Number is not
2. Low Toner. 731 RCV LAN Dialer full while Relayed Dial buffer for manual number dialing
errors, or paper jam codes stored in memory are Service Modes (For Facsimile) (For France Only) 5. PS defective. while transmitter is waiting for programmed.
3. Toner Sensor disconnected. Transmission Request was (70 stations) is being used.
displayed, beginning with the oldest code. No. Service Mode Description 048- Not Used 4. Toner Sensor defective. 6. SPC PCB defective. CFR, or FTT. Possible incompatibility, or incorrect received.
Note: 00 Not Used 049 5. SPC PCB connector disconnected. E1- 31 Scanning Lamp 1. INV PCB connector disconnected. Password (Password Reception,
Only the 30 most recent codes are displayed. 741 XMT, Polling PSTN Unable to dial Deleted the registered station name
050 Ring Detect Mode 1 = Normal Selects the quality of ringer detection. Use if the line 6. SPC PCB defective. (Does not turn On) 2. INV PCB defective. Selective Receive).
01 Function Parameter Setting Allows changes to the function parameters (the home before dialing with Timer Controlled
07 Error Log Clear a) Press the Reset key. 2 = Rough signal is out of regulation, set to "Rough" so that the U14 Replace Toner Waste 1. Toner Waste Container full. 3. Scanning Lamp defective. Mailbox full.
position, etc.). Communications, etc.
A Message "Error code can be cleared with the unit may detect the ringing signals. Container (Refer to Service Manual Sect. 3.5.3.) 4. SPC PCB connector disconnected. 402 XMT B DCN was returned from receiver Receiver working in non-CCITT mode
Start key" is displayed on the LCD.* 02 RAM Edit Mode (Factory use only.) 5. PS defective. 800 Relay PSTN The machine was requested to
051 Not Used U15 No Toner Waste Container 1. Toner Waste Container not installed. while transmitter is waiting for only. (Possible incompatibility)
b) Press the Start key. 03 Print Parameter List / Report Prints the Function Parameter List, Page Memory Test, Printer Comm. relay a document but has no
052 Pulse Rate 1 = 10 pps Selects the dial pulse rate 10/20 pps. 2. Toner Waste Container Sensor disconnected. NSF/DIS.
Report, All Document File, Protocol Trace, and Toner Order Relay Hub capability.
08 (Factory use only) Lock operation for Scanner Unit. 2 = 20 pps 3. Toner Waste Container Sensor defective. 403 RCV B Transmitter had no polling "POLLED=ON" (polling XMT ready) not
Form. E2: Lift DC Motor Error 814 Conf. XMT PSTN The remote station does not have
09 Toner Density adjustment Adjustment operation of Toner Density. 053- Not Used U16 No Developer Unit 1. Developer Unit not installed. (Polling) function. set at the transmitter.
04 Modem Tests Generates various binary, tonal, and DTMF signals, by the Conf. Polling Relay XMT nor Confidential
10 Drum Charge adjustment Adjustment operation of Drum Charge. 054 Code Function Possible Cause(s) Document to be transmitted not placed
modem. U18 Total Copy Limit Over 1. Department Copy Counter full. Relay Communication capability.
11 Not Used E2- 01 Lift Motor Rotation 1. Level Sensor connector disconnected. at the transmitter.
05 Not Used 055 Busy Tone Check 1 = Off Selects whether to detect the Busy Tone. U20 Close ADF Cover 1. ADF Cover open. Comm.
12 Org. size Sensor Adj. Adjust the slice level for the original size detection 2 = On (1st Paper Tray) 2. Level Sensor defective. 404 XMT B Transmitter sent NSS (or DCS) Receiver defective. (Modem, MJR PCB,
06 RAM Initialize Initialize RAM, and restore the default value of the function 2. ADF not installed correctly. 815 Conf. RCV PSTN Mailbox full.
(Not Used) sensors automatically. Execute this mode by closing 3. Lift Mechanism defective. followed by TCF three times, but etc.)
parameters. 056 Dial Tone Check 1 = Off Selects whether to detect Dial Tone before dialing 3. ADF Cover Sensor disconnected. 816 Conf. Polled PSTN The received Polling Password
the platen cover. 4. Lift Motor connector disconnected. the receiver did not respond. FXB PCB, or MJR PCB defective.
2 = On the telephone number. 4. ADF Cover Sensor defective. did not match.
Note: Turn the Power Switch to the OFF, and back to the ON 5. Lift Motor defective. (CFR, or FTT is usually returned) Receiver disconnects line during first
13 Black Density reference Adjustment operation of Black Density sensor. 057 DC Loop Check 1 = Off Selects whether the unit checks the DC Loop during 5. PS connector disconnected. 825 Conf. RCV PSTN Parameter settings of the remote
position to enable the parameter settings. 6. SPC PCB connector disconnected. NSS (or DCS) transmitted.
14 OPC Counter Reset Proceed when OPC is replaced. (Except for USA, 2 = On communication. 6. PS defective. 7. SPC PCB defective. Conf. Polled station are not properly set.
07 Not Used 405 XMT B Transmitter received FTT after it Line quality poor. (TCF is damaged due
15-17 Not Used and Canada) U21 Close ADF 1. ADF, and ADF Cover open. 8. PS defective. 870 MEM XMT PSTN Memory overflow occurred while
08 Check & Call Allows input of information for Service Alert Report, transmitted TCF at 2400 bps. to line noise)
18 LSU PWM Pattern Print out the Test Pattern. 058 Comm. JRNL + 1 = Off (without image) Selects whether the machine prints the COMM. 2. ADF Sensor disconnected. E2- 02 Multi-Copy LAN storing documents into memory.
Maintenance Alert Report, and Toner Order Form. Lift Motor Rotation 1. Level Sensor connector disconnected. Received RTN after Receiver defective. (Modem, MJR PCB,
Proceed when the LSU is replaced. Image 2 = On (with image) Journal with image. 3. ADF Sensor defective.
09 System Maintenance Used for Firmware Update, Firmware Backup, Parameter (2nd Paper Tray) 2. Level Sensor defective. communicating at 2400 bps. etc.) 879 Memory PSTN Memory overflow occurred during Memory overflow on the Fax side.
19 Move Mirror To Lock a) Press the Start key to move the mirror unit to the 059 Confidential RCV 1 = Off (does not print out) Selects whether the machine prints the Confidential U22 Close ADF Exit Cover 1. ADF Exit Cover open. 3. Lift Mechanism defective. FXB PCB, or MJR PCB defective. RCV substitute memory reception.
Restore, Parameter Backup, Transferring Firmware from the 2. ADF not installed correctly.
locked position for transporting the copier. Report 2 = On (prints out) RCV Report. E2- 03 Lift Motor Rotation 4. Lift Motor connector disconnected. 406 RCV B XMT-Password mismatched. XMT, RCV password does not match. LAN Memory overflow. Memory overflow on the Fax side.
PC to the Flash Card, and Sending a Received File during a 3. ADF Exit Cover Sensor disconnected.
b) When the mirror unit is locked, the machine will fatal printer error. 060 Version Indicates the Host (3rd Paper Tray) 5. Lift Motor defective. (Password RCV-Password mismatched. Last 4 digits of TSI does not match with Mail Server sent a reset command Mail server aborted the download
not accept any numerical key input. software version. 4. ADF Exit Cover Sensor defective. 6. SPC PCB connector disconnected. Comm.) Selective RCV incomplete. the last 4 digits of Auto Dial telephone while downloading the data to the (Busy with other higher priority jobs).
Note: 5. PS connector disconnected. E2- 04 Lift Motor Rotation 7. SPC PCB defective.
061 TX/RX/PRT/CPY TX:****** PRT:****** Displays the transmitted, received, total printed, and number. machine.
The locking operation is automatically reset when 6. PS defective. (4th Paper Tray) 8. CST2 PCB connector disconnected.
RX:****** CPY:****** copied document count. 407 XMT D Transmitter received no response Receiver defective. (No paper, paper 880 - - File Access Error
the Power switch is turned ON again. U25 Shake Toner Bottle 1. Toner blocked in the Toner Bottle. 9. CST2 PCB defective.
062 Print Counter 1 = Off Selects whether to print in the Fax Parameter List, after it transmitted post message, jamming, etc.)
Function Parameter Setting
884 - - File Access Error
20 TDC Check Operation Adjustment of TDC sensor. 2 = On the counter information that is displayed in the U90 Replace Battery 1. Internal battery requires replacement. 10. CST3 PCB connector disconnected. such as EOP, MPS, EOM, etc...or Receiver ceased receiving because of
11. CST3 PCB defective. 961 RCV LAN Memory file access error. SC PCB defective.
21-46 Not Used Function Parameter No. 61. received DCN. excessive errors. (Line quality poor)
Use the following procedure to change the function parameters. 12. PS defective. 962 XMT PSTN Memory file access error. SC PCB defective.
47 ADF Continuous Test Press START key to begin. 063- Not Used FXB PCB (Modem), or MJR PCB
48 Platen Continuous Test Press START key to begin. Enter the desired code number, and press "START" key. 067
068 NYSE Fax 1 = Off Selects whether the machine will forward the
Jam Error Codes (J Code) E2- 10 System Console Drive Motor
Rotation
1. Drive Mechanism defective.
2. Drive Motor connector disconnected. 408 XMT D
defective.
Transmitter received RTN after it Receiver receives data with errors.
LAN Memory file access error. SC PCB defective.

3. Drive Motor defective. transmitted EOP, MPS, or EOM. (Line quality poor)
If you wish to select another code number, scroll the menu with the "V", "/\" arrow keys. Forward 2 = On incoming, and outgoing faxes to a specified station.
A 4. CST2 PCB connector disconnected. Receiver defective. (Modem, MJR PCB,
(USA, and Note:

Copy Quality Adjustment Procedure (Order)

Once this parameter is activated, Fax 5. CST3 PCB connector disconnected. etc.)
F9 Mode: Unit Maintenance Select the desired function code, and press the "START" key.
Canada Only)
Forwarding via Fax Parameter No. 054 is 6. CST3 PCB defective.
7. PS connector disconnected.
FXB PCB, or MJR PCB defective.
automatically disabled, an Access Code of 409 XMT D Transmitter receives PIN after it Receiver receives data with error due to
When the "CLEAR" key is pressed, the selected code input will not be accepted. B 8. PS defective.
"0000" is automatically assigned, and Fax
Set the machine to Service Mode, and press "9" key on the Keypad.
Parameter No. 038 has a new setting added 9. SPC PCB connector disconnected.
transmitted a post message,
such as EOP, MPS, EOM, etc.
poor line quality, and receiving operator
requests voice contact.
When the following items are replaced, or cleaned, perform adjustments in the correct order.
Press "STOP" key twice to exit the service mode. called "NYSE". 10. SPC PCB defective.
Press the "START" key. Receiver defective. (Modem, MJR PCB,
069 NYSE Local Print 1 = Inc Selects the printing condition for the incoming faxes C Adjustment LSU Image
Function Parameter Table
etc.) Toner OPC PWM LSU Print
(USA, and 2 = On (Always) after FAX Forwarding. FXB PCB, or MJR PCB defective. Process TDC PWM Density
Enter the desired code number, or press "V", "/\" arrow keys. No. Parameter Selections Function Canada Only) INC. : Prints only if FAX Forwarding fails. E3: Development System Error Optics Spill Counter Pattern Adj.
000 Monitor/Tel Dial 1 = Monitor Selects whether the machine starts to TX
D2 410 RCV D Received DCN while waiting for Interface, or line faulty. No. Work Unit Adj. Adj. F5/F6 Adj. F6-49 Remark
ON : Always prints. Code Function Possible Cause(s) post command. (EOP, MPS, Transmitter defective. Clean Tray Reset F6-39
If you wish to select another code number, scroll the menu with the arrow keys. D3 Clean Print (Note) (Note) /50/51
Clean F8-09
2 = Tel/Dial automatically during On-Hook dialing. 070 Line Error 128 lines 1. Selects the line disconnect condition during E3- 01 Toner Bottle Motor Rotation 1. Toner Bottle Motor connector disconnected. EOM, etc.)
Monitor : Start to TX after pressing START 256 lines reception. If the number of line errors exceed this 2. Toner Bottle Motor defective. Part Item F8-14 F8-18 (Note) (Note)
Press the "SET" key. TEL/DIAL : Start to TX automatically D4 411 RCV B Received DCN after transmitting Transmitter not ready for polling
512 lines setting, the unit will disconnect the line. 3. Toner Bottle Motor Drive Mechanism defective. (Polling) NSC. communication.
001 Alarm Status 1 = Off Selects the No Paper, or No Toner alarm status. 1024 lines Press "V", or "/\ " to select the symbol rate. 4. Toner Bottle installed incorrectly. Password does not match between 1 Installation Main 1 2 3 4
Enter the desired function code number, and press "SET" key. 2 = Timer OFF : Alarm is disabled. 2058 lines 2. Selects the transmit condition of RTP/PIP, or Section Jam Location 5. SPC PCB connector disconnected.
3 = Constant Timer : Alarm will shut off after 6 seconds. Off (will not disconnect RTN/PIN. A ADF / i-ADF / Scanner 6. SPC PCB defective.
transmitter, and receiver. 2 Cleaning Optics 1 2 3
Constant : Alarm will not stop until "STOP" is 412 G3 RX B, D No response within 12 seconds in Transmitter defective.
When the "CLEAR" key is pressed, the selected code input will not be accepted. line) (Available if No. 73 Error Detect is set to
pressed, or the error is cleared/ "LINES") (See Note 1)
B Paper Transport / Exit Area 7. Toner Bottle Home Position Sensor connector disconnected. NSS/DCS/MPS wait state. (After FXB PCB defective. 3 Process Unit 1 2 3
C Paper Entry Area 8. Toner Bottle Home Position Sensor defective.
transmitting FTT)
Press "STOP" key, then press "FUNCTION", and "CLEAR" keys simultaneously to exit the service mode. corrected. 071 Total Error 1 = 5% Selects the transmit condition of RTP/PIP, or RTN/ D2 2nd Paper Tray E3- 02 Toner Screw Motor Over 1. Toner Screw Motor defective. 4 Toner Spill Tray 1 2
002 Stop Comm. 1 = Off Selects whether the machine prompts to print the 414 RCV B No response received after Password does not match between
2 = 10% PIN. Current 2. Toner Screw Motor Drive Mechanism defective.
Reboot the machine after setting the parameter(s) to activate the setting(s). JRNL 2 = On COMM. Journal when the printout condition is set to 3 = 15% (Available if No. 73 Error Detect is set to "RATE".)
D3 3rd Paper Tray
3. SPC PCB defective.
(Polling) transmitting 3rd NSC. transmitter, and receiver. 5 Replace Scanning Lamp 1 2 3
INC, and STOP is pressed during communication. D4 4th Paper Tray Transmitter defective. (No original,
4 = 20% (See Note 2) E3- 03 Toner Density Sensor Gain 1. Sensor connector disconnected. document jam, etc.) 6 Platen Glass 1 2
F9 Mode 003 Continuous Poll 1 = Off Selects whether the Continuous Polling feature is 072 Continuous Error 1 = Off (unlimited) Selects the continuous total error criteria of Off/3/6, 2. Sensor defective.
415 XMT B Remote side attempted to receive Inform the remote side that your 1
Service 2 = Stn (Tx only) enabled. 2 = 3 lines/STD or 12 lines in Standard mode. If continuous total •Jam Sensor Location of i-ADF 3. SPC PCB connector disconnected.
(Polling) message from your machine in machine does not have the polling
7 OPC Drum 2 3 4 5
Item Remarks 3 = Hub (Rx only) Stn : Place the document(s) on the ADF, or Platen, 3 = 6 lines/STD error exceeds this setting, the unit will transmit 4. SPC PCB defective.
Mode
then press the assigned Program Key to 4 = 12 lines/STD RTN/PIN.
Original Detection Sensor Original Length Sensor
E3- 10 High Voltage Power Supply 1. PS connector is disconnected.
polling communication. transmission feature. 8 Developer 1 2 3
F9 Unit 00 Fax Service Mode 416 RCV D Receiver did not detect post Transmitter defective.
Maintenance 01 Service Alert Tel # Displays the contact number when a
store, or add the documents into a polled file. (Available if No. 73 Error Detect is set to "RATE".) leak (1) - Grid Charge Voltage 2. PS is defective.
command, such as EOP, MPS, Line quality poor. (RTC signal distorted
9 OPC Drum & 1 2 3 4 5 6
(See Note 1) 073 Error Detect 1 = Lines Selects the error detect condition Lines/Rate. 3. SPC PCB connector disconnected.
machine malfunction occurs. Hub : When the polling command is initiated, the 2 = Rate Read Point 4. SPC PCB defective. EOM, etc. due to line noise) Developer
02 Firmware 00 SC Displays the firmware version for SC. machine will continuously poll originals from Sensor
5. Corona Wire is abnormal. (Check for: contamination with FXB PCB, or MJR PCB defective.
Version 01 SC Boot Displays the firmware version for SC the remote stations until it is interrupted by
074 RTN Receive 1 = Disconnect Selects whether to disconnect the phone line, or
foreign particles, broken, not installed in the proper position, 417 RCV C Receiver returned RTN in Line quality poor. (There are excessive 10 Corona Wire 1 2 3 4
2 = Continue continue when "RTN" is received.
Boot. pressing "STOP". response to post message. errors in received data)
075 Coding 1 = MH (MH only) Selects the coding scheme.
or loose tension)
FXB PCB, or MJR PCB defective.
11 Process Unit 1 2 3 4 5
02 PNL Displays the firmware version for PNL. 004 Numeric ID Set 1 = Off (will not accept) Selects whether the machine accepts, and allows to E3- 20 Main Motor Rotation 1. Drive Mechanism defective.
2 = MR (MH, or MR)
03 SPC Displays the firmware version for SPC. 2 = On (accepts) set, or change the Numeric ID.
3 = MMR (MH, MR, or 2. Main Motor connector disconnected. 418 RCV C Receiver transmitted PIN in Line quality poor. (There are excessive 12 Toner Density 1 2 3
response to PRI-Q from errors in received data)
04 Not Used 005 Destination Code 000 : Austria Specified destinations only. MMR) Eject Sensor
3. Main Motor defective.
transmitter. (Transmitting operator FXB PCB, or MJR PCB defective.
Sensor Replace Developer
05 FAX Modem Displays the firmware version for FAX 001 : U.K. 4 = JBIG 4. SPC PCB connector disconnected.
requests voice contact) 13 LSU 1 2 3
option 1. 002 : Canada
076 Batch TX 1 = Off Selects whether the batch transmission is available. Duplex Eject 5. SPC PCB defective. 4 5
003 : Denmark Sensor 6. PS defective. 420 RCV B T1 timer (35 sec.) elapsed without Wrong number dialed.
2 = On 14 SC PC Board Input F5/F6
06 Not Used
004 : Taiwan 077 RX JAM Length 1 = Off (unlimited) Selects the maximum length of a received
detecting 300 bps signal. (Non-facsimile communication) 1 2
07 SC2 Displays the firmware version for Slot 1. Transmitter defective.
005 : Finland 2=2m document that can be printed. •Jam Sensor Location of ADF Parameter
03 Print 00 F5/F6 Parameters Prints the memory contents of the F5, 006 : Germany FXB PCB, or MJR PCB defective.
078~ Not Used E4: Fuser Unit Error
Device Info. and F6 modes. 007 : Netherlands Read Point, and Eject Sensor Original Length Sensor 421 RCV B Busy Tone was detected after Remote station disconnected the line.
01 Machine Information Prints the machine setup information list. 008 : Italy 079 Code Function Possible Cause(s)
sending NSF Signal. Wrong number was dialed.
Note:
Original Detection Sensor
02 Counter Information Prints the Counter information list. 009 : Spanish 080 Doc Top Feed -99 Adjusts the distance between the scanning sensor E4- 01 Fuser Warm-up Temperature 1. Fuser Thermistor dirty.
422 XMT B Content of NSF (or DIS), or NSC Incompatible content Refer to Sect. 3.8. of the Service Manual for details.
010 : Hong Kong ~ ON position, and the scanning start position. 2. Thermistor position incorrect.
03 System Address Prints the system memory setting. (or DTC) was invalid.
011 : Australia +99 3. Thermistor defective.
Info. 4. Thermistor connector disconnected. 427 G3 B DCN received to NSF/CSI/DIS Interface is incompatible.
012 : Switzerland 081 Doc End Feed -90 Adjusts the distance between the scanning sensor
04 RAM Address Prints the RAM data dump list. 5. Fuser Lamp connector disconnected. RCV transmitted.
013 : Norway ~ OFF position, and the scanning end position.
Information 015 : Portuguese +127 6. Fuser Lamp defective. 433 XMT B, D T.30 Protocol abnormal. Defective remote station.
04 RAM Edit 0 Relative Address Setting of Relative address. 016 : Ireland 7. Fuser Thermostat defective. RCV
082 JAM Length 1=1m Selects the maximum length of the original that can
Mode 1 Absolute Address Setting of Real address. 017 : Belgium 2=2m be scanned. 8. Thermal Fuse defective. 434 XMT, or B CD (response from Modem) did Remote unit defective.
05 Serial Number Registration of Serial Number for 018 : Sweden 9. SPC PCB connector disconnected. RCV not turn OFF within 180 sec. after FXB PCB, or MJR PCB defective.
083 Not Used
Maintenance. 019 : Turkey 10. SPC PCB defective. receiver detected FLAG signal.
084 Line As No Paper 1 = Ring (ring) Selects whether to ring, or send a busy tone to the 11. Fuser temperature low. (Adjust F6-31)
Clears by Shipment Set. 020 : U.S.A. 436 G3 RX C DCN received after transmitting Transmitter defective, or incompatible.
2 = Busy (keep line busy) remote station when the recording paper runs out, 12. Incorrect SC PCB is installed.
06 RAM 00 Parameter Initialize Resets the Fax, and Function 021 : France •Jam Sensor Location of Printer FTT. Line quality poor.
or the unit cannot receive because of any trouble. 13. Incorrect SPC PCB is installed.
Initialize parameters to default values. 022 : New Zealand 456 RCV B Received relay transfer request, or
025 : Japan 085 Not Used E4- 02 Fuser Paper Jam 1. Paper Jam in Fuser Unit.
Note:Turn the Power Switch to the OFF, Paper Exit Sensor confidential document to distribute
029 : Poland 086 Reduction Fine 1 = Off Selects whether to fix with Fine Mode, or not for the 2. Paper Exit Sensor disconnected. to an end receiving station, or all
and back to the ON position to enable
030 : Czech 2 = On Reduction transmission. 3. Paper Exit Sensor defective. confidential mailboxes are used.
the parameter settings.
031 : Russia 087 Darker Level 0 = Lightest Contrast Selects the contrast level. 4. SPC PCB connector disconnected. 457 RELAY XMT B Remote unit does not have
01 All Job Clear Clears all Jobs stored in Flash Memory.
032 : Greece 088 Normal Level ~ 0 15 ADU Sensor 5. SPC PCB defective. CONF. XMT/ Relayed XMT, or Confidential
02 Not Used 033 : Hungary 15 = Darkest Contrast Lightest Darkest
089 Lighter Level E4- 10 Fuser Fan Motor Rotation 1. Fuser Fan connector disconnected. POLL Comm. capability.
03 Shipment Set Clears All Jobs, All Preset Data, 034 : Indonesia 2. Fuser Fan defective.
Parameter Initialize & Resets the 090~ Not Used 459 RCV C Failed training in Phase C. Line quality poor. (Training signal
035 : South Korea 3. SPC PCB connector disconnected.
Counters (Fax). 091 Registration Sensor distorted due to line noise)
038 : Malaysia 4. SPC PCB defective.
092 Smoothing 1 = Off Selects whether the smoothing function is available. FXB PCB, or MJR PCB defective.
04 LBP Fuser Reset Clears the LBP fuser error. 039 : China 5. PS defective.
045 : Thailand 2 = On 490 RCV C Sum of error lines exceeded the Line quality poor.
05 Dept. Counter Clear Resets the Counter
048 : South Africa 093 ~ Not Used limit (Function Parameter No. 70) FXB PCB, or MJR PCB defective.
06 Flash Memory Clear Clears the Flash Memory Data of 64 lines.
049 : Singapore 094
07 Firmware 00 Update FROM Card Updates the firmware in the machine E5: System Error 494 RCV C Interval between two EOLs was Transmitter defective.
050 : Universal 095 Reduction Ratio (70-100) Selects Print Reduction Ratio (%). 2nd Paper Path Sensor
Update with the Master Firmware Card. more than 10 sec. when receiver Line quality poor. (EOL damaged due
051 : East Euro 096 ~ Not Used Code Function Possible Cause(s)
01 Update from USB Updates the firmware in the machine E5- 11 Printer Engine Communication 1. SPC PCB connector disconnected. received message data. to line noise)
006 ID Display 1 = Number (Numeric ID) Selects the priority of displaying the ID. 101
with the USB. Abnormal 2. SPC PCB defective. FXB PCB, or MJR PCB defective.
2 = Chara (Character ID) 102 Original -30 Adjustment of original registration detection timing.
08 Program 00 Main Onboard F-ROM 4MB E5- 17 Scanner Synchronization 3. SC PCB connector disconnected. 495 XMT C During reception, CD turned OFF, Line disconnected.
007 JRNL Column 1 = Station Selects the contents of the ID to display on the Registration ~
Backup 01 Option 1 all Slot 1 FRM8 PCB 8MB 4. SC PCB defective. RCV or continued ON for long time. Transmitter defective.
2 = RCV’D ID Journal. +30 3rd Paper Path Sensor E5- 19 Scanner Line Synchronization
(Refer to 02 Option 1 a Slot 1 FRM8 PCB 4MB (a) During communication, lost loop - FXB PCB, or MJR PCB defective.
Service 008 Monitor 1 = Off Selects whether the Monitor is ON/OFF for 103 Trail Edge Read -9 Adjustment of trail edge void. E5- 40 Sort Memory Abnormal 1. Sort Memory defective.
03 Option 1 b Slot 1 FRM8 PCB 4MB (b) current.
Manual 2 = On monitoring fax signals. Timing ~ 2. SC PCB connector disconnected.
(FOR SERVICE USE ONLY) 496 XMT C CS of modem is not able to turn FXB PCB defective.
Sect. 3.7.) 04 Not Use Slot 2 FRM8 PCB 8MB 0 3. SC PCB defective.
ON.
05 Not Use Slot 2 FRM8 PCB 4MB (a) 009 DC Loop 1 = Off (Normal) Selects a false Off Hook state for back to back 104~ Not Used E5- 42 Total Counter Connection 1. Total Counter connector disconnected.
2 = On (Off Hook) communication test. 109 4th Paper Path Sensor 2. Total Counter defective. 501 XMT/ B Incompatible Modem on the
06 Not Use Slot 2 FRM8 PCB 4MB (b)
3. SPC PCB connector disconnected. RCV(V.34) Remote unit.
09 Update Program Card Creates a Master Firmware Card using 010 TX Level 00 = 0 dBm Selects the TX signal output level, 0 to -15 dBm in 110 MAC Address Indicates the MAC Address.
~ 1 dBm steps. (Refer to Service Manual Sect. 4.3.) 4. SPC PCB defective. 502 XMT/ B, C, D During reception, CD turned OFF Line disconnected.
the Firmware Update Kit. A 4MB, or 111 Not Used
15 = -15 dBm RCV(V.34) or continued ON for long time. Transmitter defective.
8MB Flash Memory Card will be 112 Insert EMAIL TXT 1 = Off Selects whether the Text Template (email message) E5- 60 Power Supply Cooling Fan 1. Cooling Fan connector disconnected.
During communication, lost loop - FXB PCB, or MJR PCB defective.
required depending upon the model. 011 RX Level 1 = -43 dBm Selects the receiving sensitivity of -33/-38/-43/-48 2 = On is programmable, and added on all email sent in the Motor Rotation 2. Cooling Fan defective.
current.
10 Program 00 From card to slot 1 Configuration for Program copy. 2 = -38 dBm dBm. message body above the top line of text. (Up to 40 3. SPC PCB connector disconnected.
3 = -33 dBm 4. SPC PCB defective. 503 XMT/ B, C, D CS of modem is not able to turn FXB PCB defective.
Copy 01 Not Used characters Programmed in the User Parameters.)
4 = -48 dBm 5. PS defective. RCV(V.34) ON during training. Line disconnected.
02 From slot 1 to card Note:
012 DTMF Level 00 = 0 dBm Selects the DTMF output level, 0 to -15 dBm in 1 After enabling this feature, aside from entering •Paper Transport / Exit / Entry / Feed Unit Area 504 RCV/V.34 B Polling is rejected from the remote No polling original set.
03 Not Used ~ dBm steps. the text in the User Parameters, it also has to be (Polling) station.
04 Not Used 15 =-15 dBm activated in each Auto Dial Number before it will Jam Error Codes (J Code) Table 505 XMT/V.34 B Polling XMT is rejected. No polling original set.
E7: Optional Unit Error
05 Not Used 013 G3 RX EQL 1 = 0dB Selects the cable equalizer for G3 reception mode, take effect. It does not work for Direct Dialed Code Contents Section (Polling)
Numbers. Code Function Check Points
11 Parameter Backup Backup the Parameter. 2 = 4dB 0dB, 4dB, 8dB, or 12dB. J00 The Registration Sensor does not detect paper within a predetermined time after the B 540 XMT ECM B No response after transmitting Incompatible interface.
113~ Not Used E7- 90 Hard Key Abnormal 1. Wrong Hand Key installed. 3rd CTC, or DCN received.
12 Parameter Restore Restore the Parameter. 3 = 8dB paper starts feeding. (Sheet Bypass)
114 2. Hard Key defective.
13 Page Memory Size Displays the page memory size (MB). 4 = 12dB J01 The Registration Sensor does not detect paper within a predetermined time after the 541 XMT ECM D No response after transmitting Faulty line.
014 G3 TX EQL 1 = 0dB Selects the cable equalizer for G3 transmission 115 Time Zone 1 = Scroll Selects the setting method for Time Zone. Paper Feed Roller starts rotating. (1st Paper Tray) 3rd EOR, or received DCN. MJR PCB abnormal.
14 Sort Memory Size Displays the sort memory size (MB).
2 = 4dB mode, 0dB, 4dB, 8dB, or 12dB. 2 = Direct Scroll : Allows using "Scroll Keys" to scroll 542 XMT ECM D No response to the 3rd RR Remote unit abnormal.
J02 The 2nd Paper Tray Path Sensor does not detect paper within a predetermined time D2
3 = 8dB through the Time Zone Table. E13: Out of Toner transmitted, or received DCN.
after the Paper Feed Roller starts rotating. (2nd Paper Tray)
4 = 12dB Direct : Allows you to input the Time Zone Code Function Possible Cause(s)
J03 The 3rd Paper Tray Path Sensor does not detect paper within a predetermined time D3 543 XMT ECM D T5 timer (60 sec.) elapsed without Remote unit abnormal.
015 ~ Not Used directly, (*) key to be used as a switch
after the Paper Feed Roller starts rotating. (3rd Paper Tray) E13 No Toner Detection 1. Out of Toner. MCF.
016 between +/-.
J04 The 4th Paper Tray Path Sensor does not detect paper within a predetermined time D4 2. Toner Bottle not installed. 544 XMT ECM D Stopped Transmission after EOR Faulty line.
017 TX Start 2400 bps Selects the transmission modem start speed, 116 Overwrite 1 = Yes Selects whether the Overwrite Warning is included 3. Toner Bottle not installed correctly.
after the Paper Feed Roller starts rotating. (4th Paper Tray) Transmission. MJR PCB abnormal.
4800 bps 14400/12000/TC9600/TC7200/9600/7200/4800/ Warning 2 = No on the Internet FAX Result Receipt when 4. Toner Sensor disconnected.
programming the Auto Dialer via email. J07 The Registration Sensor does not detect paper within a predetermined time after the B, D2 550 RCV ECM C Timer between frames in phase C Defective remote station.
7200 bps 2400 bps. 5. Toner Sensor defective. has elapsed.
117~ Not Used 2nd Paper Tray Path Sensor is activated. (2nd Paper Tray)
9600 bps Press "V", or "/\ " to select the symbol rate. 6. SPC PCB connector disconnected.
121 J08 The Registration Sensor did not detect paper within a predetermined time after the D3 554 RCV ECM D Transmitted ERR after receiving Faulty line.
TC7200 Note: 7. SPC PCB defective.
3rd Paper Tray Path Sensor is activated. (3rd Paper Tray) EOR.
TC9600 This parameter is applicable only when 122 LDAP 1 = Off When LDAP is used, specialized characters may be
12000 bps communicating with regular G3 machines. 2 = On displayed as different characters. J09 The Registration Sensor did not detect paper within a predetermined time after the D4 555 RCV ECM D Transmitted PIN after receiving Faulty line, and Operator Call requested
14400 bps When communicating with Super G3 (V.34) 4th Paper Tray Path Sensor is activated. (4th Paper Tray) EOR. by RX side.
123 One Ring Sound 1 = Off When Function Parameter No. 45 "Ring Detect
machines, use Parameter No. 32. (USA, and 2 = On Count" is set to 1 Ring, and this parameter is J12 The 2nd Paper Tray Path Sensor does not go off within a predetermined time after B, D2 570 RCV B Password, or machine code did
018 RX Start 2400 bps Selects the reception modem start speed, 14400/ Canada Only) enabled (On), the machine will only ring once out the Paper Tray Path Sensor is activated. not match during remote
4800 bps 12000/TC9600/TC7200/9600/7200/4800/2400 bps. loud, answering on the second ring count. diagnostic communication.
J13 The 3rd Paper Tray Path Sensor does not go off within a predetermined time after D3
7200 bps Press "V", or "/\ " to select the symbol rate. the Paper Tray Path Sensor is activated. 571 XMT B Remote unit did not have the
124~ Not Used
9600 bps Note: remote diagnostic function.
199 J14 The 4th Paper Tray Path Sensor does not go off within a predetermined time after D4
TC7200 This parameter is applicable only when 580 XMT B Sub-address transmission to a unit Sub-address transmission to a unit that
the Paper Tray Path Sensor is activated.
TC9600 communicating with regular G3 machines. that has their DIS bit 49 (NSF bit has no Sub-address function.
12000 bps When communicating with Super G3 (V.34) J19 The Registration Sensor does not detect within a predetermined time after the ADU B
155) OFF.
14400 bps machines, use Parameter No. 33. Note 1: Continuous Polling (Station Mode) Sensor is activated.
This feature allows you to store, or add documents into a polled file in memory. J22 The 2nd Paper Tray Path Sensor detect paper at the time of the initials. B, D2 581 XMT B Sub-address Password Sub-address transmission to a unit that
019 ITU-T V.34 1 = Off Selects whether the ITU-T V.34 is Off, On, or Select. transmission to a unit that has has no Sub-address function.
2 = On Select: Select whether the ITU-T V.34 is Off, or On, J23 The 3rd Paper Tray Path Sensor detect paper at the time of the initials. D2, D3 their DIS bit 50 (NSF bit 156) OFF.
3 = Select when entering Phone Book Dialing To enable the Continuous Polling feature set Function Parameter No. 003 to "2:Station". J24 The 4th Paper Tray Path Sensor detect paper at the time of the initials. D3, D4
The last Program Key will be assigned with the "Store 4 Poll" Key name automatically 582 XMT B Sub-address SEP (for Polling) Sub-address transmission to a unit that
Numbers, or Manual Number Dialing. J30 The Registration Sensor does not go off within a predetermined time after the Sensor B transmission to a unit that has has no Sub-address function.
and cannot be changed.
020 ITU-T ECM 1 = Off (Invalid) Select the ECM mode. is activated. (Sheet Bypass) their DIS bit 47 (NSF bit 130) OFF.
2 = On (Valid) J31 The Registration Sensor does not go off within a predetermined time after the Sensor 601 XMT ADF Door was opened during ADF
021 EP Tone 1 = Off (without EP Tone) Selects whether to add the echo protect tone on To prepare the document(s) to be polled, simply place the document(s) on the ADF, or Platen is activated. (Except Sheet Bypass) transmission.
2 = On (with EP Tone) V.29 mode. and then press the Program Key to store, or add the document(s) into a polled file.
J32 The Registration Sensor does not go off within a predetermined time after the ADU 623 XMT A No original was in the ADF. Operator removed the original from the
(Used when Echo Suppression is disabled.) Sensor is activated. (DP-8020E) (Built-in dialer engaged) ADF after dialing was completed.
On : Add (Note: If a regular polled file is stored in memory, the Program Key for Continuous Polling will
J33 The Registration Sensor detects paper during non-printing mode. Original was not set properly in the ADF.
Off : Do not add not be accepted.)
J45 The Paper Exit Sensor keeps detecting paper after a predetermined time, during 630 XMT, or B Redial count over. No dial tone detected. Sensor did not
022 Signal Interval 1 = 100 ms Selects the time interval between the receiving non-printing mode. RCV detect dial tone. (Country dependent)
2 = 200 ms signal, and the transmitting signal. Note 2: Function Parameter No. 070 (Line Error)-Transmit condition of RTP/PIP, or RTN/PIN
J46 The Paper Exit Sensor does not go off within a predetermined time after the Sensor (Polling) Busy tone is detected. (Country
3 = 500 ms dependent) T1 timer (35 5 sec) elapsed
is activated.
023 TCF Check 1 = Normal (Short) Selects the TCF check interval Long/Short Setting without a signal from the receiver.
Signal J48 The Paper Exit Sensor does not detect paper within a predetermined time after the
2 = Long 1:128 2:256 3:512 4:1024 5:2048 6:Off 631 XMT A "STOP" key was pressed during
Registration Sensor is activated.
024 CED Frequency 1 = 1080 Hz (non ITU-T) Selects the CED frequency 2100/1080 Hz MCF/PIP 0-31 0-63 0-127 0-255 0-511 Always Auto Dialing.
2 = 2100 Hz J70-79 (See the following table below)
RTP/PIP 32-63 64-127 128-255 256-511 512-1023 - J82 The ADU Sensor does not detect paper within a predetermined time after the Duplex B 634 XMT PSTN Redial count over with no
025 COMM. Start-Up 1 = First Selects the communication start-up condition response, or busy tone was not
RTN/PIN 64-127 128-255 256-511 512-1023 1024-2047 - Feed Roller starts rotating.
2 = Second (XMT, and Polling). detected.
(Used when Echo Suppression is disabled.) J85 The ADU Sensor does not go off within a predetermined time after the Sensor is
Note:
Note 3: Function Parameter No. 071 (Total Error)-Transmit condition of RTP/PIP, or RTN/PIN activated. U.S.A., and Canadian models
026 Non-Standard 1 = Off (Invalid) Selects own mode (Panafax mode).
2 = On (Valid) J87 The ADU Sensor detects paper during non-printing mode. will redial only once if a busy
027 Short Protocol B 1 = Off (Invalid) Selects the short protocol mode. Setting J90 Abnormal Paper Jam: During printing the Front Door was opened, etc. B, C, D tone is not detected.
Signal J91 A Paper Tray was pulled out while feeding paper. C 638 XMT PSTN Power turned Off with applicable Power switched Off.
2 = On (Valid) 1:5% 2:10% 3:15% 4:20%
028 Short Protocol D 1 = Off (Invalid) Selects the short protocol mode. When activated, J92-94 (See the following table below) LAN data in memory, or during Power failure occurred.
MCF/PIP 0-2 0-4 0-7 0-9
2 = On (Valid) it allows the machine to automatically store the J95 The paper size of a Tray differs from the Machine setting size. B communication.
RTP/PIP 3-4 5-9 8-14 10-19
modem speed for each Auto Dial Number. J97 After passing the Registration Sensor (Roller), the Paper does not clear the sensor 700 XMT PSTN Communication terminated by
RTN/PIN 5- 10- 15- 20- RCV LAN Operator pressing the "STOP" key.
029 Remote 1 = Off (will not accept) Selects whether the machine accepts Remote within a predetermined time period.
Diagnostics 2 = On (accepts) Diagnostics from the service station. J98 No VRDY Signal after a predetermined time has lapsed. 712 XMT LAN Unknown email address replied Mail Server received an incorrect email
Note 4: The default setting of parameters depends on the country's specifications, or regulations. Print the
030 CED & 300 bps 1 = 75 ms Selects the pause interval between the CED, and from the Mail Server. address. (Dependent on Server's Mail
Function Parameter List to confirm the default settings. J99 No VSYNC Signal within a predetermined time after VRDY Signal is activated.
2 = 1 sec the 300 bps signal. application)
(Used when Echo Suppression is disabled.) 714 XMT LAN LAN Interface error. The 10Base-T/100Base-TX cable not
•i-ADF / ADF Area RCV Cannot logon to the LAN. connected.
031 RTC = EOL x 12 1 = Off (EOLx6) Selects the RTC signal, EOLx6, or EOLx12.
2 = On (EOLx12) An unexpected LAN problem occurred.
Jam Error Codes (J Code) Table 715 XMT LAN TCP/IP connection timed out. Incorrect IP Address set.
032 V34 TX Start 2400-33600bps Selects the transmission modem start speed for
Code Contents Section Verify the IP Address, Default Router IP
V.34 communication, 33600-2400 bps.
Press "V", or "/\ " to select the symbol rate. J70 The Read Point Sensor does not detect paper within a predetermined time after the A Address, SMTP Server IP Address.
original starts feeding. 716 XMT LAN Cannot logon to the LAN. Incorrect SMTP Server IP Address set.
033 V34 RX Start 2400-33600bps Selects the receiving modem start speed for V.34
communication, 33600-2400 bps. J71 The Read Point Sensor keeps detecting paper within a predetermined time after No email application activated on the
Press "V", or "/\ " to select the symbol rate. scanning starts. Mail Server.
034 V34 TX SR 2400-3429sr Selects the transmission symbol rate for V.34, J72 The Eject Sensor does not detect paper within a predetermined time after the Read A 717 XMT LAN Incomplete SMTP Protocol Mail Server's hard disk may be full.
3429/ 3200/3000/2800/2400 sr. Point Sensor is activated. (i-ADF transmission. Mail Server defective.
Press "V", or "/\ " to select the symbol rate. only) 718 XMT LAN Page Memory Overflow occurred Check the document size, and
035 V34 RX SR 2400-3429sr Selects receiving symbol rate for V.34, 3429/3200/ J73 1. The Eject Sensor keeps detecting paper within a predetermined time after while receiving printing data. resolution.
3000/2800/2400 sr. scanning starts. The paper size selected within Ask originator to resend in a supported
Press "V", or "/\ " to select the symbol rate. 2. The Eject Sensor keeps detecting paper within a predetermined time after the your application to print is larger size, and resolution.
Read Point Sensor is deactivated. than the paper size loaded in the
036 Not Used
J76 The Duplex Eject Sensor does not detect paper within a predetermined time after paper tray(s).
037 Protocol Display 1 = Off (not displayed) Selects whether to display the modem speed
scanning starts.
2 = On (displayed) during communication.
(Press the Job Status Key to display)