Schischek Explosionproof.

Protection of Life. Health. Assets.

H VA C
Product Catalogue

www.schischek.com
Price list Catalogue
Product 2021

Schischek Global Coverage

Greenland

Sweden
Iceland

Finland R u s s i a
Norway

Estonia

C a n a d a United Kingdom Latvia

Denmark Lithuania

Neth. Belarus
Ireland Poland
Germany
Bel.
Lux. Czech Rep. Ukraine
Licht. Austria
Slovakia Kazakhstan
Mold.
France Switz. Slovenia
Hungary Mongolia
Croatia Romania
Italy Bos. &
Herz. Serb.
Mont. Bulgaria
Albania Mace.
Georgia Uzbekistan Kyrgyzstan
Portugal Spain Armenia Azerb. N. Korea
United States Greece
Turkey Turkmenistan Tajikistan
Japan
Gibraltar S. Korea
Malta Cyprus Syria C h i n a
Morocco Tunisia
Lebanon
Iraq Iran Afghanistan
Israel
Jordan
Algeria Kuwait Nepal
Libya Pakistan Bhutan
Western Sahara Egypt Bahrain
Qatar
Mexico Bahamas (Occupied by Morocco)
Bangladesh
Saudi Arabia U.A.E.
Cuba India Hong Taiwan
Dom. Rep.
Mauritania Laos Kong
Puerto Rico
Oman
Jamaica Haiti Mali Niger
Belize Chad
Honduras Cape Verde Senegal Eritrea Yemen Thailand Philippines
Guatemala
Nicaragua Gambia Sudan Cambodia
El Salvador Guinea-Bissau Burkina Faso Dijbouti Vietnam
Trinidad & Tobago Benin
Costa Rica
Panama Guinea Nigeria
Venezuela Guyana Sierra Leone
Cote Togo Ethiopia
d'Ivoire
Ghana Central African Republic Palau
French Guiana Sri Lanka Brunei
Liberia Cameroon
Colombia Suriname
Somalia Malaysia
Equatorial Guinea Uganda
Kenya Singapore
Congo
Ecuador Gabon Rwanda
Dem. Rep.
of Congo Burundi Papua
I n d o n e s i a New Guinea
Peru Tanzania Solomon Islands
B r a z i l East Timor
Angola Somoa
Malawi
Zambia Vanuatu
Fiji
Bolivia
Zimbabwe Mauritius
Namibia Mozambique
Botswana Tonga
Paraguay
Chile A u s t r a l i a
Madagascar
Swaziland

Rotork GmbH
Lesotho
South Africa
Argentina Uruguay

Muehlsteig 45
New Zealand

Rotork GmbH – Langenzenn / Germany

90579 Langenzenn Rotork - Schischek Sales
Germany
Tel. +49 9101 9081- 0
Fax +49 9101 9081-77 Rotork/Schischek contact worldwide:
[email protected] www.schischek.com/contact/rotork-schischek-worldwide
www.schischek.com www.rotork.com/en/contact-us/sales-service-locator

2 www.schischek.com
Price list Catalogue
Product 2021

Explosion protection is safety,

worldwide, in thousands of applications!
Explosion protection since 1975 Safety is essential
Since 1975 Schischek has supplied electric explosion With this motto we state that explosion protection is not
proof products worldwide for heating, ventilation and a question of statistics or half hearted solutions but that
air-conditioning, for industrial and offshore applications. 100% safety must be guaranteed at all times. Explosion
Schischek Explosionproof has become an important protection means taking on responsibility.
partner for consultants, public authorities, control com-
panies, installers, OEM‘s and, not least of all, the end
user. There is no "little ex-protection" !
As supplier of components, we have always considered People have confidence in us as Ex protection special-
it our duty to develop products in conjunction with other ists and in you as consultant, installer and contractor.
control equipment. Modern Ex equipment, reliable, All Schischek Ex products are, therefore, type-exami-
proven and with “state of the art” technology. nation certified, approved by and produced according
to the very latest standards and regulations. According
to type and kind of protection, our products are suitable
for operation in Ex areas, zones 0, 1, 2, 20, 21 and 22,
including gases, vapours, mists and dusts – of course
in accordance with ATEX directives.

Heating, Ventilation, Air-Conditioning

Schischek supplies control companies and contractors fire and smoke dampers, paintspray areas, exhaust
in the Building Automation market. We have developed systems in chemical laboratories, battery rooms, sew-
equipment which is compatible with nearly all control age treatment plants, pumping stations etc.
systems. By combining Schischek products with con-
ventional switching and control equipment, reliable
high quality systems are implemented that conform to
Ex protection standards. Some examples of use are

Offshore, Onshore, Shipbuilding

Harsh environmental conditions and robust quality Since, thousands of Schischek actuators in special alu-
cause stringent design / construction requirements on minium and stainless steel housings or with offshore/
components and materials. A fast closing electric ac- marine coating have been delivered and installed,
tuator for fire / smoke dampers of less than 3 seconds moreover, the product range has been continuously
is a requirement on oil and gas platforms as well as on enlarged and refined.
FPSO‘s. After an intense development process includ-
ing trials, a completely new concept in actuator engi-
neering was produced.

Chemical, Pharmaceutical, Car Industries

Whether you need air flow control in a pharmaceutical completion. At the same time, safety and reliability in-
plant or temperature regulation of paint tanks in the car crease in planning, installation, approval and operation.
industry, Schischek offers cost-effective solutions spe- Since all equipment is maintenance-free, cost savings
cifically designed for control integration. Ex protection are realised.
is required for applications from paint spray shops to
drying stations. System compatibility with all aspects
of control facilitates integrated planning from design to

Water Treatment Plants, Compressor Stations

In co-operation with valve and damper manufactur- We can provide solutions to problems as far as Ex
ers, industrial control companies and contractors, ventilation and precise temperature control in industrial
Schischek products are in use worldwide. Our products plants are concerned.
are characterised by the “highest protection class, com-
pact size and easy handling”.

www.schischek.com 3
Price list Catalogue
Product 2021

Which components have to be explosion proof ?

In the diagram below, a typical air-handling system shows which equipment is allowed
in the Ex area and which should only be placed in the safe area. The diagram does
not claim to be complete.
If in doubt, please do not hesitate to consult us at Schischek. We will advise you in any
case. A brief discussion in the early stages of planning can avoid substantial costs in
remedial work later and gives you the peace of mind that you have a safely installed
operating system.

Air damper Air filter Heater Fan Humidifier

+
M

M ΔP F ΔP
Ex area

1 6 3 7 6 2
M M

%rH
rF
Safe area

Hz

°C

1 2 3 4

Quarter turn actuators for dampers and valves Failsafe linear valve actuators Linear valve actuators Temperature and humidity sensors

ExMax ExMax + LIN ExRun ExCos-D

RedMax RedMax + LIN RedRun RedCos-D

• 5…150 Nm • 500…6.000 N • 500…10.000 N • −40°C…+125°C

• 3...150 sec /90° • 7,5…42 mm stroke • 5…60 mm stroke • 0…100 %rH
• On-off, 3-pos • 0,1...15 sec / mm • 2...15 sec / mm • full range adjustable
• modulating • On-off, 3-pos • On-off, 3-pos
• with/without spring return • modulating • modulating
• with spring return

4 www.schischek.com
 Price list Catalogue
Product 2021

Y ou should be aware of the areas of installation where an explosive atmosphere

may build up. Furthermore, you should have the responsible authority classify the W ith Schischek products this is simple because all equipment is certified
according to the highest safety standards – according to ATEX, of course!
relevant Ex zone and in combination with type and condition of the explosive medium,
you should be able to select suitable explosion proof equipment.

Restrictor Restrictor Air damper Fire damper

%rH
rF °C ΔP °C ΔP M M

4 7 5 4 8 1 1
VAV

PLC-System

5 6 7 8

Pressure/ differential pressure sensors Filter monitoring, fan belt protection Thermostats, humidistats, Frost protection Controller

ExCos-P ExBin-P ExBin-D ExReg-V

RedCos-P RedBin-P RedBin-D Differential pressure
• −40°C…+125°C • 0…100 Pa (VAV)
• 0…100 %rH • 0…300 Pa (VAV)
• 1- or 2-stage • 0…1.000 Pa (VAV)

• ± 100…± 7.500 Pa • 0…5.000 Pa ExBin-FR

• full range adjustable • Pressure / Differential pressure RedBin-FR
• Fan-belt protection • −10°C…+15°C
• Filter protection • Capillary: 3 m, 6 m
• 1- or 2-stage switching point • 1-stage switching point

www.schischek.com 5
Price list Catalogue
Product 2021

Content overview
Installation areas
Gas Dust Gas Dust Gas Dust
Product series Page 0 20 1 21 2 22 SA*
Quarter turn actuators 90°
ExMax size S/M 5… 150 Nm with/without spring return 10-11    
RedMax size S/M 5… 150 Nm with/without spring return 12-13  
InMax size S/M 5… 150 Nm with/without spring return 14-15 
Linear valve actuators with spring return with 7,5 /10 /15 /20 /30 /42 mm stroke (fixed)
LIN-..+ ExMax.. size S/M 500… 3.000 N with spring return 18-19    
LIN-..+ RedMax.. size S/M 500… 3.000 N with spring return 18-19  
LIN-..+ InMax.. size S/M 500… 3.000 N with spring return 18-19 
Valve actuators with 5...60 mm stroke
ExRun size S 500… 10.000 N without spring return 20-21    
RedRun size S 500… 10.000 N without spring return 20-21  
InRun size S 500… 10.000 N without spring return 20-21 
Special options for actuators
Overview special options for actuators 22-23
ExPolar / ExArctic heating system for actuators use in Ex areas down to −50 / −60 °C 25    
InPolar / InArctic heating system for actuators use in safe area down to −50 / −60 °C 25 
Controller for volume flow (VAV) and pressure regulation
ExReg-V volume flow and pressure controller 0… 1.000 Pa 28-29    
InReg-V volume flow and pressure controller 0… 1.000 Pa 28-29 
Analog sensors for measuring of volume flow, temperature, humidity, pressure/differential pressure
ExCos-P differential pressure, VAV sensors ± 100… 7.500 Pa 33    
RedCos-P differential pressure, VAV sensors ± 100… 7.500 Pa 33  
InCos-P differential pressure, VAV sensors ± 100… 7.500 Pa 33 
ExCos-D temperature and humidity transmitter for ExPro-C… sensors 34    
RedCos-D temperature and humidity transmitter for ExPro-C… sensors 34  
InCos-D temperature and humidity transmitter for InPro-C… sensors 34 
ExPro-C… temperature and humidity sensors for operation in HVAC systems 35    
InPro-C… temperature and humidity sensors for operation in HVAC systems 35 
ExLine/ExSens transmitter EXL-IM-9182-… and analog, passive temperature-/humidity-/pressure sensors 36-37 () ()  ()   
Switching sensors (thermostats, hygrostats, pressostats, fan belt protection, frost protection)
ExBin-P pressure / differential pressure 0… 5.000 Pa 41    
RedBin-P pressure / differential pressure 0… 5.000 Pa 41  
InBin-P pressure / differential pressure 0… 5.000 Pa 41 
ExBin-FR frost protection thermostat −10… +15 °C 42    
RedBin-FR frost protection thermostat −10… +15 °C 42  
InBin-FR frost protection thermostat −10… +15 °C 42 
ExBin-A modules for adaptation of 1-2 passive, potential free, switching ExSens sensors 43    
RedBin-A modules for adaptation of 1-2 passive, potential free, switching ExSens sensors 43  
InBin-A modules for adaptation of 1-2 passive, potential free, switching sensors 43 
ExBin-D temperature and humidity thermostat for ExPro-B… sensors 44    
RedBin-D temperature and humidity thermostat for ExPro-B… sensors 44  
InBin-D temperature and humidity thermostat for InPro-B… sensors 44 
ExPro-B… thermostat / hygrostat sensors for operation in HVAC systems 45    
InPro-B… thermostat / hygrostat sensors for operation in HVAC systems 45 
ExLine/ExSens switching module EXL-IR-9170-… and binary, passive temperature-/humidity-/pressure sensors 46-47 () ()  ()   
Special options for sensors
Overview special options for sensors 48
ExPolar / ExArctic heating system for sensors’ use in Ex areas down to −40 / −60 °C 49    
InPolar / InArctic heating system for sensors’ use in safe area down to −40 / −60 °C 49 
Door holder magnets
ExMag door holder magnets with 650, 1.300, 2.000 N force 50    
Components
ExComp different Ex-components, e.g. switches, push buttons, … 50    

*SA = Safe area () = on request

Additional information
Product codes / definitions 52-53
Installation according to ATEX (Zone system) 54
Installation according to NEC 500 (Division system, North America) 55
Valve automation 56-57
Certification information 58-59
Information about ATEX directives 60
Labelling of explosion proof equipment according to ATEX 61
Explosion proof informations 62
Information about zones, explosion groups and temperature classes 63
Ex applications 64-67
Rotork products (extraction) and service 68-73
Damper actuation focused 74-75

6 www.schischek.com
Price list Catalogue
Product 2021

Customer Support & Services

!
ed offer
advanc
Warranty Extension

• Predictable safety and reliable service

• Transparent and flexible
• Budget hedging for EPCs

Commissioning & On-Site Service

• Commissioning and technical briefing

• Examination and evaluation of installed products
• Troubleshooting and rectification

Trainings & Seminars

• Basics explosion protection:

- Certifications
- Ignition protection types
- Explosion protection specifications
• Schischek products and solutions:
- Damper actuators
- Valve actuators
- Transmitters
• Facility layout in hazardous locations (HVAC)

Conditions
Services Specification of Services
Warranty 12+12 warranty extension available, please contact our sales team
Warranty 12+24 warranty extension available, please contact our sales team
Service Commissioning available, please contact our sales team
Service On-site service on request
Training on request

www.schischek.com 7
Price list Catalogue
Product 2021

ExMax – Damper actuators for hazardous locations!

Quarter turn and rotary applications for damper control ...

HAZARDOUS LOCATIONS ZONE 1, 2, 21, 22

FAST SPRING RETURN TIME

UNIVERSAL POWER SUPPLY

STAINLESS STEEL SOLUTION

OFFSHORE/MARINE COATED VERSION

EASY INSTALLATION

COMPACT DIMENSIONS

8 www.schischek.com
Price list Catalogue
Product 2021

..Max Electrical drive engineering with 90° angle of rotation – Overview

Overview ..Max quarter turn actuators
Installation areas: The actuator concept offers obvious advantages:
ExMax- ...................... actuators for use in hazardous locations zone 1, 2, 21, 22 1. Small dimension, compact, easy installation, highest protection classes, cost effective
RedMax- .................... actuators for use in hazardous locations zone 2, 22 2. Universal power supply 24 to 240 Volt AC/DC, selfadjustable
InMax-........................ actuators for use in safe area 3. With or without spring return (in acc. with type)
4. Robust aluminium housing, IP66, optional in stainless steel
5. Integrated heater for low temperatures
Application areas: 6. On site adjustable motor running time
Ex/ Red/ InMax.......... for air and fire dampers, VAV control, ball valves, control dampers, … 7. Application also possible into harsh environment (stainless steel or offshore/marine coated)
8. Integrated manual override
9. Useful accessories such as retrofit limit switches
10. Actuators are direct coupling

Actuators for air-dampers ExMax-.., RedMax-.., InMax-.. ¼ turn actuators

Nm ExMax 90° actuators from 5 to 150 Nm, with or w/o spring

return (running time ~ 1, 3, 10, 20 s depending on
type), for air-dampers.
95°

normal wiring

Actuators for smoke- and fire-dampers ExMax-.., RedMax-.., InMax-.. ¼ turn actuators

Nm ExMax 90° actuators from 5 to 150 Nm, with or w/o spring

return (running time ~ 1, 3, 10, 20 s depending on
type), for smoke- and fire-dampers.
95°

normal wiring

Actuators for VAV control ExMax-.., RedMax-.., InMax-.. ¼ turn actuators

Nm ExMax 90° actuators from 5 to 150 Nm, with or w/o spring

return (running time ~ 1, 3, 10, 20 s depending on
type), for VAV control.
95°

normal wiring

Actuators for ball valves ExMax-.., RedMax-.., InMax-.. ¼ turn actuators

Nm ExMax 90° actuators from 5 to 150 Nm, with or w/o spring

return (running time ~ 1, 3, 10, 20 s depending on
type), for ball valves.
95°

normal wiring

Actuators for butterfly valves and other ¼ turn valves ExMax-.., RedMax-.., InMax-.. ¼ turn actuators

Nm ExMax 90° actuators from 5 to 150 Nm, with or w/o spring

return (running time ~ 1, 3, 10, 20 s depending on
type), for butterfly valves and other quarter turn
95° valves.

normal wiring

Safe area Ex area

www.schischek.com 9
Price list Catalogue
Product 2021

ExMax 90° Ex quarter turn actuators size “S” for zone 1, 2, 21, 22
Explosion proof Features of ExMax-.. size S
ExMax-.. Size S Description Basics
Zone 1, 2, 21, 22 ExMax are, in acc. with type, for automation of air • 24…240 VAC/DC self adaptable power supply
Gas + Dust dampers, fire and smoke dampers, volume control, as • Up to 5 different running times adjustable on site
certified according to well as for ball valves, throttle valves and other quarter • 95° angle of rotation (5° pretension)
ATEX, IECEx, EAC, turn armatures. • 100% overload protected
INMETRO, KOSHA • Aluminium housing IP66, cable ~ 1 m
UL*, CSA*, Delivery: • −40°C (−20°C for type …F1) up to +40°C/ +50°C
*…-A version only 1 actuator, ~ 1 m cable, allen key for manual override, • Emergency manual override
4 screws. • Squared shaft connection 12 × 12 mm
• Dimensions (H × W × D) 210 × 95 × 80 mm

Ex-d quarter turn actuators without spring return, 24 to 240 VAC/DC, for zone 1, 2, 21, 22
Type Torque Running time 90° Spring return Control mode Feedback Features Size
ExMax- 5.10 5 Nm / 10 Nm 3/15/30/60/120 sec. - On-off, 3-pos - - S
ExMax-15.30 15 Nm / 30 Nm 3/15/30/60/120 sec. - On-off, 3-pos - - S
ExMax- 5.10-S 5 Nm / 10 Nm 3/15/30/60/120 sec. - On-off, 3-pos 2 × aux. switches (5° /85°) - S
ExMax-15.30-S 15 Nm / 30 Nm 3/15/30/60/120 sec. - On-off, 3-pos 2 × aux. switches (5° /85°) - S
ExMax- 5.10-Y 5 Nm / 10 Nm 7,5/15/30/60/120 sec. - 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - S
ExMax-15.30-Y 15 Nm / 30 Nm 7,5/15/30/60/120 sec. - 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - S

Ex-d quarter turn actuators with spring return, 24 to 240 VAC/DC, for zone 1, 2, 21, 22
Type Torque Running time 90° Spring return Control mode Feedback Features Size
ExMax-5.10- F 5 Nm / 10 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos - - S
ExMax- 15- F 15 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos - - S
ExMax-5.10-SF 5 Nm / 10 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos 2 × aux. switches (5° /85°) - S
ExMax- 15-SF 15 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos 2 × aux. switches (5° /85°) - S
ExMax-5.10-YF 5 Nm / 10 Nm 7,5/15/30/60/120 sec. ~ 3 sec. / 10 sec. 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - S
ExMax- 15-YF 15 Nm 7,5/15/30/60/120 sec. ~ 3 sec. / 10 sec. 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - S
ExMax-5.10-BF 5 Nm / 10 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos 2 × aux. switches (5° /85°) ExPro-TT-.. connector S
ExMax- 15-BF 15 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos 2 × aux. switches (5° /85°) ExPro-TT-.. connector S

Ex-d quarter turn actuators with fast spring return for Offshore application, 24 to 240 VAC/DC, for zone 1, 2, 21, 22
Type Torque Running time 90° Spring return* Control mode Feedback Features Size
ExMax- 8- F1 6 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off - - S
ExMax-15- F1 12 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off - - S
ExMax- 8-SF1 6 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off 2 × aux. switches (5° /85°) - S
ExMax-15-SF1 12 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off 2 × aux. switches (5° /85°) - S
ExMax- 8-BF1 6 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off 2 × aux. switches (5° /85°) ExPro-TT-.. connector S
ExMax-15-BF1 12 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off 2 × aux. switches (5° /85°) ExPro-TT-.. connector S
*At low temperatures the spring return time might vary. For further assistance please contact our sales team.

Accessories
Type Description/Technical data
ExSwitch External, adaptable, on site adjustable Ex-d auxiliary switch with 2 potential free contacts, adaptable to ExMax-.. actuators
ExBox-3P Ex-e terminal box connectable to ExMax-.. actuators with 1 cable for On-off or 3-pos operation
ExBox-3P/SW Ex-e terminal box connectable to ExMax-.. actuators with 1 cable for On-off or 3-pos operation + 2 cable for external aux. switches type ExSwitch
ExBox-Y/S Ex-e terminal box connectable to ExMax-.. actuators with 2 cable, for modulating operation or 3-pos + integrated switches (HS)
ExBox-Y/S/SW Ex-e terminal box connectable to ExMax-.. actuators with 2 cable, for modulating or 3-pos operation with feedback signal + 2 cable for external aux. switches
ExBox-BF Ex-e terminal box connectable to ExMax-.. actuators with 1 cable, for all ExMax-...-BF
ExBox-BF/SW Ex-e terminal box connectable to ExMax-.. actuators with 1 cable, for all ExMax-...-BF + 2 cable for external aux. switches type ExSwitch
MKK-S Mounting bracket for ..Box-terminal boxes for direct coupling to ..Max-.. actuators size S
KB-S Mounting clamp for round damper shaft Ø 10 to 20 mm and squared shafts 10 to 16 mm, incl. bracket, connectable to all ExMax-.. size S
KB-A Shaft connection for damper shafts Ø ½ ″, adaptable for all North American ..Max-.. actuators size S
HV-SKU, HV-SLU Manual override, connectable to actuators size S. HV-SKU = short version, HV-SLU = long version for add. mounting of ..Box/..Switch
AR-12-xx Squared reduction part from 12 × 12 mm to shafts with 11 mm (type AR-12-11), 10 mm (type AR-12-10), 8 mm (type AR-12-08)
ExPro-TT-… Safety temperature trigger for fire dampers, switching at 71° /72°C, with 1 m cable, suitable only for ExMax-.. /RedMax-…-BF actuators !
EXC-DS1/VA Safety temperature sensor for duct mounting, potential free contact, switching at 70°C…160°C (10°C steps)
DWB-S Angle rotation limiter for mounting on actuator size S (details on request)
Retrofit-Kit-S Mechanical adaptation for mounting on ..Max actuators size S, required to replace a previous type EXT15..-F1, EXT12..-F16, EXT15.. or EXT30..
ADS Different adaptations for different valves available. Please don‘t hesitate to ask for technical solution
Special options and offshore kits see page 23

10 www.schischek.com
Price list Catalogue
Product 2021

ExMax 90° Ex quarter turn actuators size “M” for zone 1, 2, 21, 22
Explosion proof Features of ExMax-.. size M
ExMax-.. Size M Description Basics
Zone 1, 2, 21, 22 ExMax are, in acc. with type, for automation of air • 24…240 VAC/DC self adaptable power supply
Gas + Dust dampers, fire and smoke dampers, volume control, as • Up to 5 different running times adjustable on site
certified according to well as for ball valves, throttle valves and other quarter • 95° angle of rotation (5° pretension)
ATEX, IECEx, EAC, turn armatures. • 100% overload protected
INMETRO • Aluminium housing IP67, cable ~ 1 m
UL*, CSA*, Delivery: • −40°C (−20°C for type …F3) up to +40°C/+50°C
*…-A version only 1 actuator, ~ 1 m cable, allen key for manual override, • Emergency manual override
4 screws. • Squared shaft connection 16 × 16 mm
• Dimensions (H × W × D) 288 × 149 × 116 mm

Ex-d quarter turn actuators without spring return, 24 to 240 VAC/DC, for zone 1, 2, 21, 22
Type Torque Running time 90° Spring return Control mode Feedback Features Size
ExMax-50.75 50 Nm / 75 Nm 40/60/90/120/150 sec. - On-off, 3-pos - - M
ExMax- 100 100 Nm 40/60/90/120/150 sec. - On-off, 3-pos - - M
ExMax- 150 150 Nm 40/60/90/120 sec. - On-off, 3-pos - - M
ExMax-50.75-S 50 Nm / 75 Nm 40/60/90/120/150 sec. - On-off, 3-pos 2 × aux. switches (5° /85°) - M
ExMax- 100-S 100 Nm 40/60/90/120/150 sec. - On-off, 3-pos 2 × aux. switches (5° /85°) - M
ExMax- 150-S 150 Nm 40/60/90/120 sec. - On-off, 3-pos 2 × aux. switches (5° /85°) - M
ExMax-50.75-Y 50 Nm / 75 Nm 40/60/90/120/150 sec. - 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - M
ExMax- 100-Y 100 Nm 40/60/90/120/150 sec. - 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - M

Ex-d quarter turn actuators with spring return, 24 to 240 VAC/DC, for zone 1, 2, 21, 22
Type Torque Running time 90° Spring return Control mode Feedback Features Size
ExMax-30- F 30 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos - - M
ExMax-50- F 50 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos - - M
ExMax-60- F 60 Nm 40/60/90/120 sec. ~ 20 sec. On-off, 3-pos - - M
ExMax-30-SF 30 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) - M
ExMax-50-SF 50 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) - M
ExMax-60-SF 60 Nm 40/60/90/120 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) - M
ExMax-30-YF 30 Nm 40/60/90/120/150 sec. ~ 20 sec. 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - M
ExMax-50-YF 50 Nm 40/60/90/120/150 sec. ~ 20 sec. 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - M
ExMax-30-BF 30 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) ExPro-TT-.. connector M
ExMax-50-BF 50 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) ExPro-TT-.. connector M
ExMax-60-BF 60 Nm 40/60/90/120 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) ExPro-TT-.. connector M

Ex-d quarter turn actuators with fast spring return for Offshore application, 24 to 240 VAC/DC, for zone 1, 2, 21, 22
Type Torque Running time 90° Spring return* Control mode Feedback Features Size
ExMax-30- F3 24 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off - - M
ExMax-50- F3 40 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off - - M
ExMax-30-SF3 24 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off 2 × aux. switches (5° /85°) - M
ExMax-50-SF3 40 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off 2 × aux. switches (5° /85°) - M
ExMax-30-BF3 24 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off 2 × aux. switches (5° /85°) ExPro-TT-.. connector M
ExMax-50-BF3 40 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off 2 × aux. switches (5° /85°) ExPro-TT-.. connector M
*At low temperatures the spring return time might vary. For further assistance please contact our sales team.

Accessories
Type Description/Technical data
ExSwitch External, adaptable, on site adjustable Ex-d auxiliary switch with 2 potential free contacts, adaptable to ExMax-.. actuators
ExBox-3P Ex-e terminal box connectable to ExMax-.. actuators with 1 cable for On-off or 3-pos operation
ExBox-3P/SW Ex-e terminal box connectable to ExMax-.. actuators with 1 cable for On-off or 3-pos operation + 2 cable for external aux. switches type ExSwitch
ExBox-Y/S Ex-e terminal box connectable to ExMax-.. actuators with 2 cable, for modulating operation or 3-pos + integrated switches (HS)
ExBox-Y/S/SW Ex-e terminal box connectable to ExMax-.. actuators with 2 cable, for modulating or 3-pos operation with feedback signal + 2 cable for external aux. switches
ExBox-BF Ex-e terminal box connectable to ExMax-.. actuators with 1 cable, for all ExMax-...-BF
ExBox-BF/SW Ex-e terminal box connectable to ExMax-.. actuators with 1 cable, for all ExMax-...-BF + 2 cable for external aux. switches type ExSwitch
MKK-M Mounting bracket for ..Box-terminal boxes for direct coupling to ..Max-.. actuators size M
HV-MU Manual override, connectable to actuators size M
AR-16-xx Squared reduction part from 16 × 16 mm to shafts with 14 mm (type AR-16-14), 12 mm (type AR-16-12)
ExPro-TT-… Safety temperature trigger for fire dampers, switching at 71° /72°C, with 1 m cable, suitable only for ExMax-.. /RedMax-…-BF actuators !
EXC-DS1/VA Safety temperature sensor for duct mounting, potential free contact, switching at 70°C…160°C (10°C steps)
DWB-M Angle rotation limiter for mounting on actuator size M
Retrofit-Kit-M Mechanical adaptation for mounting on ..Max actuators size M, required to replace a previous type EXT30..-F3, EXT50..-F3 or EXT50..
ADM Different adaptations for different valves available. Please don‘t hesitate to ask for technical solution
Special options and offshore kits see page 23

www.schischek.com 11
Price list Catalogue
Product 2021

RedMax 90° Ex quarter turn actuators “S” for zone 2, 22

Explosion proof Features of RedMax-.. size S
RedMax-.. Size S Description Basics
Zone 2, 22 RedMax are, in acc. with type, for automation of air • 24…240 VAC/DC self adaptable power supply
Gas + Dust dampers, fire and smoke dampers, volume control, as • Up to 5 different running times adjustable on site
certified according to well as for ball valves, throttle valves and other quarter • 95° angle of rotation (5° pretension)
ATEX, IECEx, EAC, turn armatures. • 100% overload protected
INMETRO, • Aluminium housing IP66, cable ~ 1 m
UL*, CSA*, Delivery: • −40°C (−20°C for type …F1) up to +40°C/ +50°C
*…-A version only 1 actuator, ~ 1 m cable, allen key for manual override, • Emergency manual override
4 screws. • Squared shaft connection 12 × 12 mm
• Dimensions (H × W × D) 210 × 95 × 80 mm

Ex-d quarter turn actuators without spring return, 24 to 240 VAC/DC, for zone 2, 22
Type Torque Running time 90° Spring return Control mode Feedback Features Size
RedMax- 5.10 5 Nm / 10 Nm 3/15/30/60/120 sec. - On-off, 3-pos - - S
RedMax-15.30 15 Nm / 30 Nm 3/15/30/60/120 sec. - On-off, 3-pos - - S
RedMax- 5.10-S 5 Nm / 10 Nm 3/15/30/60/120 sec. - On-off, 3-pos 2 × aux. switches (5° /85°) - S
RedMax-15.30-S 15 Nm / 30 Nm 3/15/30/60/120 sec. - On-off, 3-pos 2 × aux. switches (5° /85°) - S
RedMax- 5.10-Y 5 Nm / 10 Nm 7,5/15/30/60/120 sec. - 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - S
RedMax-15.30-Y 15 Nm / 30 Nm 7,5/15/30/60/120 sec. - 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - S

Ex-d quarter turn actuators with spring return, 24 to 240 VAC/DC, for zone 2, 22
Type Torque Running time 90° Spring return Control mode Feedback Features Size
RedMax-5.10- F 5 Nm / 10 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos - - S
RedMax- 15- F 15 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos - - S
RedMax-5.10-SF 5 Nm / 10 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos 2 × aux. switches (5° /85°) - S
RedMax- 15-SF 15 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos 2 × aux. switches (5° /85°) - S
RedMax-5.10-YF 5 Nm / 10 Nm 7,5/15/30/60/120 sec. ~ 3 sec. / 10 sec. 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - S
RedMax- 15-YF 15 Nm 7,5/15/30/60/120 sec. ~ 3 sec. / 10 sec. 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - S
RedMax-5.10-BF 5 Nm / 10 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos 2 × aux. switches (5° /85°) ExPro-TT-.. connector S
RedMax- 15-BF 15 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos 2 × aux. switches (5° /85°) ExPro-TT-.. connector S

Ex-d quarter turn actuators with fast spring return for Offshore application, 24 to 240 VAC/DC, for zone 2, 22
Type Torque Running time 90° Spring return* Control mode Feedback Features Size
RedMax- 8- F1 6 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off - - S
RedMax-15- F1 12 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off - - S
RedMax- 8-SF1 6 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off 2 × aux. switches (5° /85°) - S
RedMax-15-SF1 12 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off 2 × aux. switches (5° /85°) - S
RedMax- 8-BF1 6 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off 2 × aux. switches (5° /85°) ExPro-TT-.. connector S
RedMax-15-BF1 12 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off 2 × aux. switches (5° /85°) ExPro-TT-.. connector S
*At low temperatures the spring return time might vary. For further assistance please contact our sales team.

Accessories
Type Description/Technical data
RedSwitch External, adaptable, on site adjustable auxiliary switch with 2 potential free contacts, adaptable to RedMax-.. actuators
RedBox-3P Ex-e terminal box connectable to RedMax-.. actuators with 1 cable for On-off or 3-pos operation
RedBox-3P/SW Ex-e terminal box connectable to RedMax-.. actuators with 1 cable for On-off or 3-pos operation + 2 cable for external aux. switches type RedSwitch
RedBox-Y/S Ex-e terminal box connectable to RedMax-.. actuators with 2 cable, for modulating operation or 3-pos + integrated switches (HS)
RedBox-Y/S/SW Ex-e terminal box connectable to RedMax-.. actuators with 2 cable, for modulating or 3-pos operation with feedback signal + 2 cable for external aux. switches
RedBox-BF Ex-e terminal box connectable to RedMax-.. actuators with 1 cable, for all RedMax-…-BF
RedBox-BF/SW Ex-e terminal box connectable to RedMax-.. actuators with 1 cable, for all RedMax-…-BF + 2 cable for external aux. switches type RedSwitch
MKK-S Mounting bracket for ..Box-terminal boxes for direct coupling to ..Max-.. actuators size S
KB-S Mounting clamp for round damper shaft Ø 10 to 20 mm and squared shafts 10 to 16 mm, incl. bracket, connectable to all RedMax-.. size S
KB-A Shaft connection for damper shafts Ø ½ ″, adaptable for all North American ..Max-.. actuators size S
HV-SKU, HV-SLU Manual override, connectable to actuators size S. HV-SKU = short version, HV-SLU = long version for add. mounting of ..Box/..Switch
AR-12-xx Squared reduction part from 12 × 12 mm to shafts with 11 mm (type AR-12-11), 10 mm (type AR-12-10), 8 mm (type AR-12-08)
ExPro-TT-… Safety temperature trigger for fire dampers, switching at 71° /72°C, with 1 m cable, suitable only for ExMax-.. /RedMax-…-BF actuators !
EXC-DS1/VA Safety temperature sensor for duct mounting, potential free contact, switching at 70°C…160°C (10°C steps)
DWB-S Angle rotation limiter for mounting on actuator size S (details on request)
Retrofit-Kit-S Mechanical adaptation for mounting on ..Max actuators size S, required to replace a previous type EXT15..-F1, EXT12..-F16, EXT15.. or EXT30..
ADS Different adaptations for different valves available. Please don‘t hesitate to ask for technical solution
Special options and offshore kits see page 23

12 www.schischek.com
Price list Catalogue
Product 2021

RedMax 90° Ex quarter turn actuators “M” for zone 2, 22

Explosion proof Features of RedMax-.. size M
RedMax-.. Size M Description Basics
Zone 2, 22 RedMax are, in acc. with type, for automation of air • 24…240 VAC/DC self adaptable power supply
Gas + Dust dampers, fire and smoke dampers, volume control, as • Up to 5 different running times adjustable on site
certified according to well as for ball valves, throttle valves and other quarter • 95° angle of rotation (5° pretension)
ATEX, IECEx, EAC, turn armatures. • 100% overload protected
INMETRO, • Aluminium housing IP67, cable ~ 1 m
UL*, CSA*, Delivery: • −40°C (−20°C for type …F3) up to +40°C/+50°C
*…-A version only 1 actuator, ~ 1 m cable, allen key for manual override, • Emergency manual override
4 screws. • Squared shaft connection 16 × 16 mm
• Dimensions (H × W × D) 288 × 149 × 116 mm

Ex-d quarter turn actuators without spring return, 24 to 240 VAC/DC, for zone 2, 22
Type Torque Running time 90° Spring return Control mode Feedback Features Size
RedMax-50.75 50 Nm / 75 Nm 40/60/90/120/150 sec. - On-off, 3-pos - - M
RedMax- 100 100 Nm 40/60/90/120/150 sec. - On-off, 3-pos - - M
RedMax- 150 150 Nm 40/60/90/120 sec. - On-off, 3-pos - - M
RedMax-50.75-S 50 Nm / 75 Nm 40/60/90/120/150 sec. - On-off, 3-pos 2 × aux. switches (5° /85°) - M
RedMax- 100-S 100 Nm 40/60/90/120/150 sec. - On-off, 3-pos 2 × aux. switches (5° /85°) - M
RedMax- 150-S 150 Nm 40/60/90/120 sec. - On-off, 3-pos 2 × aux. switches (5° /85°) - M
RedMax-50.75-Y 50 Nm / 75 Nm 40/60/90/120/150 sec. - 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - M
RedMax- 100-Y 100 Nm 40/60/90/120/150 sec. - 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - M

Ex-d quarter turn actuators with spring return, 24 to 240 VAC/DC, for zone 2, 22
Type Torque Running time 90° Spring return Control mode Feedback Features Size
RedMax-30- F 30 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos - - M
RedMax-50- F 50 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos - - M
RedMax-60- F 60 Nm 40/60/90/120 sec. ~ 20 sec. On-off, 3-pos - - M
RedMax-30-SF 30 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) - M
RedMax-50-SF 50 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) - M
RedMax-60-SF 60 Nm 40/60/90/120 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) - M
RedMax-30-YF 30 Nm 40/60/90/120/150 sec. ~ 20 sec. 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - M
RedMax-50-YF 50 Nm 40/60/90/120/150 sec. ~ 20 sec. 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - M
RedMax-30-BF 30 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) ExPro-TT-.. connector M
RedMax-50-BF 50 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) ExPro-TT-.. connector M
RedMax-60-BF 60 Nm 40/60/90/120 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) ExPro-TT-.. connector M

Ex-d quarter turn actuators with fast spring return for Offshore application, 24 to 240 VAC/DC, for zone 2, 22
Type Torque Running time 90° Spring return* Control mode Feedback Features Size
RedMax-30- F3 24 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off - - M
RedMax-50- F3 40 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off - - M
RedMax-30-SF3 24 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off 2 × aux. switches (5° /85°) - M
RedMax-50-SF3 40 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off 2 × aux. switches (5° /85°) - M
RedMax-30-BF3 24 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off 2 × aux. switches (5° /85°) ExPro-TT-.. connector M
RedMax-50-BF3 40 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off 2 × aux. switches (5° /85°) ExPro-TT-.. connector M
*At low temperatures the spring return time might vary. For further assistance please contact our sales team.

Accessories
Type Description/Technical data
RedSwitch External, adaptable, on site adjustable auxiliary switch with 2 potential free contacts, adaptable to RedMax-.. actuators
RedBox-3P Ex-e terminal box connectable to RedMax-.. actuators with 1 cable for On-off or 3-pos operation
RedBox-3P/SW Ex-e terminal box connectable to RedMax-.. actuators with 1 cable for On-off or 3-pos operation + 2 cable for external aux. switches type RedSwitch
RedBox-Y/S Ex-e terminal box connectable to RedMax-.. actuators with 2 cable, for modulating operation or 3-pos + integrated switches (HS)
RedBox-Y/S/SW Ex-e terminal box connectable to RedMax-.. actuators with 2 cable, for modulating or 3-pos operation with feedback signal + 2 cable for external aux. switches
RedBox-BF Ex-e terminal box connectable to RedMax-.. actuators with 1 cable, for all RedMax-…-BF
RedBox-BF/SW Ex-e terminal box connectable to RedMax-.. actuators with 1 cable, for all RedMax-…-BF + 2 cable for external aux. switches type RedSwitch
MKK-M Mounting bracket for ..Box-terminal boxes for direct coupling to ..Max-.. actuators size M
HV-MU Manual override, connectable to actuators size M
AR-16-xx Squared reduction part from 16 × 16 mm to shafts with 14 mm (type AR-16-14), 12 mm (type AR-16-12)
ExPro-TT-… Safety temperature trigger for fire dampers, switching at 71° /72°C, with 1 m cable, suitable only for ExMax-.. /RedMax-…-BF actuators !
EXC-DS1/VA Safety temperature sensor for duct mounting, potential free contact, switching at 70°C…160°C (10°C steps)
DWB-M Angle rotation limiter for mounting on actuator size M
Retrofit-Kit-M Mechanical adaptation for mounting on ..Max actuators size M, required to replace a previous type EXT30..-F3, EXT50..-F3 or EXT50..
ADM Different adaptations for different valves available. Please don‘t hesitate to ask for technical solution
Special options and offshore kits see page 23

www.schischek.com 13
Price list Catalogue
Product 2021

InMax 90° quarter turn actuators “S” for safe area

Industrial Features of InMax-.. size S
InMax-.. Size S Description Basics
NOT Explosion proof InMax are, in acc. with type, for automation of air • 24…240 VAC/DC self adaptable power supply
and only for dampers, fire and smoke dampers, volume control, as • Up to 5 different running times adjustable on site
use in safe area well as for ball valves, throttle valves and other quarter • 95° angle of rotation (5° pretension)
IP66 turn armatures. • 100% overload protected
• Aluminium housing IP66, cable ~ 1 m
Delivery: • −40°C (−20°C for type …F1) up to +50°C
1 actuator, ~ 1 m cable, allen key for manual override, • Emergency manual override
4 screws. • Squared shaft connection 12 × 12 mm
• Dimensions (H × W × D) 210 × 95 × 80 mm

Quarter turn actuators without spring return, 24 to 240 VAC/DC, for safe area
Type Torque Running time 90° Spring return Control mode Feedback Features Size
InMax- 5.10 5 Nm / 10 Nm 3/15/30/60/120 sec. - On-off, 3-pos - - S
InMax-15.30 15 Nm / 30 Nm 3/15/30/60/120 sec. - On-off, 3-pos - - S
InMax- 5.10-S 5 Nm / 10 Nm 3/15/30/60/120 sec. - On-off, 3-pos 2 × aux. switches (5° /85°) - S
InMax-15.30-S 15 Nm / 30 Nm 3/15/30/60/120 sec. - On-off, 3-pos 2 × aux. switches (5° /85°) - S
InMax- 5.10-Y 5 Nm / 10 Nm 7,5/15/30/60/120 sec. - 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - S
InMax-15.30-Y 15 Nm / 30 Nm 7,5/15/30/60/120 sec. - 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - S

Quarter turn actuators with spring return, 24 to 240 VAC/DC, for safe area
Type Torque Running time 90° Spring return Control mode Feedback Features Size
InMax-5.10-F 5 Nm / 10 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos - - S
InMax- 15-F 15 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos - - S
InMax-5.10-SF 5 Nm / 10 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos 2 × aux. switches (5° /85°) - S
InMax- 15-SF 15 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos 2 × aux. switches (5° /85°) - S
InMax-5.10-YF 5 Nm / 10 Nm 7,5/15/30/60/120 sec. ~ 3 sec. / 10 sec. 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - S
InMax- 15-YF 15 Nm 7,5/15/30/60/120 sec. ~ 3 sec. / 10 sec. 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - S
InMax-5.10-BF 5 Nm / 10 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos 2 × aux. switches (5° /85°) InPro-TT-.. connector S
InMax- 15-BF 15 Nm 3/15/30/60/120 sec. ~ 3 sec. / 10 sec. On-off, 3-pos 2 × aux. switches (5° /85°) InPro-TT-.. connector S

Quarter turn actuators with fast spring return for Offshore application, 24 to 240 VAC/DC, for safe area
Type Torque Running time 90° Spring return* Control mode Feedback Features Size
InMax- 8-F1 6 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off - - S
InMax-15-F1 12 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off - - S
InMax- 8-SF1 6 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off 2 × aux. switches (5° /85°) - S
InMax-15-SF1 12 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off 2 × aux. switches (5° /85°) - S
InMax- 8-BF1 6 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off 2 × aux. switches (5° /85°) InPro-TT-.. connector S
InMax-15-BF1 12 Nm 3/15/30/60/120 sec. ~ 1 sec. On-off 2 × aux. switches (5° /85°) InPro-TT-.. connector S
*At low temperatures the spring return time might vary. For further assistance please contact our sales team.

Accessories
Type Description/Technical data
InSwitch External, adaptable, on site adjustable auxiliary switch with 2 potential free contacts, adaptable to InMax-.. actuators
InBox-3P Terminal box connectable to InMax-.. actuators with 1 cable for On-off or 3-pos operation
InBox-3P/SW Terminal box connectable to InMax-.. actuators with 1 cable for On-off or 3-pos operation + 2 cable for external aux. switches type InSwitch
InBox-Y/S Terminal box connectable to InMax-.. actuators with 2 cable, for modulating operation or 3-pos + integrated switches (HS)
InBox-Y/S/SW Terminal box connectable to InMax-.. actuators with 2 cable, for modulating or 3-pos operation with feedback signal + 2 cable for external aux. switches
InBox-BF Terminal box connectable to InMax-.. actuators with 1 cable, for all InMax-…-BF
InBox-BF/SW Terminal box connectable to InMax-.. actuators with 1 cable, for all InMax-…-BF + 2 cable for external aux. switches type InSwitch
MKK-S Mounting bracket for ..Box-terminal boxes for direct coupling to ..Max-.. actuators size S
KB-S Mounting clamp for round damper shaft Ø 10 to 20 mm and squared shafts 10 to 16 mm, incl. bracket, connectable to all InMax-.. size S
KB-A Shaft connection for damper shafts Ø ½ ″, adaptable for all North American ..Max-.. actuators size S
HV-SKU, HV-SLU Manual override, connectable to actuators size S. HV-SKU = short version, HV-SLU = long version for add. mounting of ..Box/..Switch
AR-12-xx Squared reduction part from 12 × 12 mm to shafts with 11 mm (type AR-12-11), 10 mm (type AR-12-10), 8 mm (type AR-12-08)
InPro-TT-… Safety temperature trigger for fire dampers, switching at 71° /72°C, with 1 m cable, suitable only for InMax-…-BF actuators !
EXC-DS1/VA Safety temperature sensor for duct mounting, potential free contact, switching at 70°C…160°C (10°C steps)
DWB-S Angle rotation limiter for mounting on actuator size S (details on request)
Retrofit-Kit-S Mechanical adaptation for mounting on ..Max actuators size S, required to replace a previous type NOT15..-F1, NOT12..-F16, NOT15.. or NOT30..
ADS Different adaptations for different valves available. Please don‘t hesitate to ask for technical solution
Special options and offshore kits see page 23

14 www.schischek.com
Price list Catalogue
Product 2021

InMax 90° quarter turn actuators “M” for safe area

Industrial Features of InMax-.. size M
InMax-.. Size M Description Basics
NOT Explosion proof InMax are, in acc. with type, for automation of air • 24…240 VAC/DC self adaptable power supply
and only for dampers, fire and smoke dampers, volume control, as • Up to 5 different running times adjustable on site
use in safe area well as for ball valves, throttle valves and other quarter • 95° angle of rotation (5° pretension)
IP67 turn armatures. • 100% overload protected
• Aluminium housing IP67, cable ~ 1 m
Delivery: • −40°C (−20°C for type …F3) up to +50°C
1 actuator, ~ 1 m cable, allen key for manual override, • Emergency manual override
4 screws. • Squared shaft connection 16 × 16 mm
• Dimensions (H × W × D) 288 × 149 × 116 mm

Quarter turn actuators without spring return, 24 to 240 VAC/DC, for safe area
Type Torque Running time 90° Spring return Control mode Feedback Features Size
InMax-50.75 50 Nm / 75 Nm 40/60/90/120/150 sec. - On-off, 3-pos - - M
InMax- 100 100 Nm 40/60/90/120/150 sec. - On-off, 3-pos - - M
InMax- 150 150 Nm 40/60/90/120 sec. - On-off, 3-pos - - M
InMax-50.75-S 50 Nm / 75 Nm 40/60/90/120/150 sec. - On-off, 3-pos 2 × aux. switches (5° /85°) - M
InMax- 100-S 100 Nm 40/60/90/120/150 sec. - On-off, 3-pos 2 × aux. switches (5° /85°) - M
InMax- 150-S 150 Nm 40/60/90/120 sec. - On-off, 3-pos 2 × aux. switches (5° /85°) - M
InMax-50.75-Y 50 Nm / 75 Nm 40/60/90/120/150 sec. - 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - M
InMax- 100-Y 100 Nm 40/60/90/120/150 sec. - 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - M

Quarter turn actuators with spring return, 24 to 240 VAC/DC, for safe area
Type Torque Running time 90° Spring return Control mode Feedback Features Size
InMax-30- F 30 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos - - M
InMax-50- F 50 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos - - M
InMax-60- F 60 Nm 40/60/90/120 sec. ~ 20 sec. On-off, 3-pos - - M
InMax-30-SF 30 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) - M
InMax-50-SF 50 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) - M
InMax-60-SF 60 Nm 40/60/90/120 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) - M
InMax-30-YF 30 Nm 40/60/90/120/150 sec. ~ 20 sec. 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - M
InMax-50-YF 50 Nm 40/60/90/120/150 sec. ~ 20 sec. 3-pos, 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA - M
InMax-30-BF 30 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) InPro-TT-.. connector M
InMax-50-BF 50 Nm 40/60/90/120/150 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) InPro-TT-.. connector M
InMax-60-BF 60 Nm 40/60/90/120 sec. ~ 20 sec. On-off, 3-pos 2 × aux. switches (5° /85°) InPro-TT-.. connector M

Quarter turn actuators with fast spring return for Offshore application, 24 to 240 VAC/DC, for safe area
Type Torque Running time 90° Spring return* Control mode Feedback Features Size
InMax-30- F3 24 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off - - M
InMax-50- F3 40 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off - - M
InMax-30-SF3 24 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off 2 × aux. switches (5° /85°) - M
InMax-50-SF3 40 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off 2 × aux. switches (5° /85°) - M
InMax-30-BF3 24 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off 2 × aux. switches (5° /85°) InPro-TT-.. connector M
InMax-50-BF3 40 Nm 40/60/90/120/150 sec. ~ 3 sec. On-off 2 × aux. switches (5° /85°) InPro-TT-.. connector M
*At low temperatures the spring return time might vary. For further assistance please contact our sales team.

Accessories
Type Description/Technical data
InSwitch External, adaptable, on site adjustable auxiliary switch with 2 potential free contacts, adaptable to InMax-.. actuators
InBox-3P Terminal box connectable to InMax-.. actuators with 1 cable for On-off or 3-pos operation
InBox-3P/SW Terminal box connectable to InMax-.. actuators with 1 cable for On-off or 3-pos operation + 2 cable for external aux. switches type InSwitch
InBox-Y/S Terminal box connectable to InMax-.. actuators with 2 cable, for modulating operation or 3-pos + integrated switches (HS)
InBox-Y/S/SW Terminal box connectable to InMax-.. actuators with 2 cable, for modulating or 3-pos operation with feedback signal + 2 cable for external aux. switches
InBox-BF Terminal box connectable to InMax-.. actuators with 1 cable, for all InMax-…-BF
InBox-BF/SW Terminal box connectable to InMax-.. actuators with 1 cable, for all InMax-…-BF + 2 cable for external aux. switches type InSwitch
MKK-M Mounting bracket for ..Box-terminal boxes for direct coupling to ..Max-.. actuators size M
HV-MU Manual override, connectable to actuators size M
AR-16-xx Squared reduction part from 16 × 16 mm to shafts with 14 mm (type AR-16-14), 12 mm (type AR-16-12)
InPro-TT-… Safety temperature trigger for fire dampers, switching at 71° /72°C, with 1 m cable, suitable only for InMax-…-BF actuators !
EXC-DS1/VA Safety temperature sensor for duct mounting, potential free contact, switching at 70°C…160°C (10°C steps)
DWB-M Angle rotation limiter for mounting on actuator size M
Retrofit-Kit-M Mechanical adaptation for mounting on ..Max actuators size M, required to replace a previous type NOT30..-F3, NOT50..-F3 or NOT50..
ADM Different adaptations for different valves available. Please don‘t hesitate to ask for technical solution
Special options and offshore kits see page 23

www.schischek.com 15
Price list Catalogue
Product 2021

ExMax+LIN&ExRun – Valve actuators for hazardous locations!

Linear applications for valve control ...

HAZARDOUS LOCATIONS ZONE 1, 2, 21, 22

FAST SPRING RETURN TIME

UNIVERSAL POWER SUPPLY

OFFSHORE/MARINE COATED SOLUTION

EASY INSTALLATION

ROBUST IP66 HOUSING

COMPACT DIMENSIONS

16 www.schischek.com
Price list Catalogue
Product 2021

..Max + LIN, ..Run Electrical drive engineering for valves – Overview

Overview ..Max + LIN linear guide unit and ..Run valve actuators
Installation areas: The actuator concept offers obvious advantages:
ExMax-.. +LIN, ExRun-.. .................. actuators for use in hazardous locations zone 1, 2, 21, 22 1. Small dimension, compact, easy installation, highest protection classes, cost effective
RedMax-.. + LIN, RedRun-.. ............. actuators for use in hazardous locations zone 2, 22 2. Universal power supply 24 to 240 Volt AC/DC, selfadjustable
InMax-.. + LIN, InRun-.. .................... actuators for use in safe area 3. With or without spring return (spring return only at ..Max + LIN linear guide unit)
Application areas: 4. Robust aluminium housing, IP66
Ex/ Red/ InMax + LIN ...................... for globe- or 3-way valves (with safety function) 5. Integrated heater for low temperatures
Ex/ Red/ InRun ................................ for globe- or 3-way valves 6. On site adjustable motor running time
7. Integrated manual override
8. Offshore /marine coated version available
9. Useful accessories such as retrofit limit switches

Actuators with spring return for 2-way and 3-way valves ExMax-.., RedMax-.., InMax-.. + LIN linear guide unit
Linear motion valve actuators with spring return
N ExMax+LIN from 500 to 3.000 N. Fixed stroke with 7.5, 10,
7,5 mm - 15, 20, 30, or 42 mm, for automation of globe- or
42 mm 3-way valves. Linkage to numerous valve types and
brands available.

normal wiring

Actuators for 2-way and 3-way valves ExRun-.., RedRun-.., InRun-.. valve actuators
Valve actuators from 500 to 10.000 N. On site ad-
N ExRun justable stroke from 5 to 60 mm, for automation of
5 mm - globe- or 3-way valves. Linkage to numerous valve
60 mm types and brands available.

normal wiring

Safe area Ex area

www.schischek.com 17
Price list Catalogue
Product 2021

..Max-.. + LIN-.. Linear valve actuators size “S” and “M” with spring return
Explosion proof Industrial Features ..Max-.. + LIN-.. (size S and M)
ExMax-.. + LIN-.. RedMax-.. + LIN-.. InMax-.. + LIN-.. Description Basics
Zone 1, 2, 21, 22 Zone 2, 22 NOT Explosion proof ..Max-.. + LIN-.. linear valve actuators with • 24…240 VAC/DC self adaptable power
Gas + Dust Gas + Dust and only for spring return for automation of globe- or supply
certified according to certified according to use in safe area 3-way valves. • Running time 0,1…15 sec./mm ¹
ATEX, IECEx, EAC, ATEX, IECEx, EAC, IP66 Use as actuator with safety function, On-off • Stroke 7.5, 10, 15, 20, 30, 42 mm ¹
INMETRO, KOSHA1 INMETRO, or 3-pos. actuator or modulating actuator. • Force 500…3.000 N ¹
1
ExMax size S only UL*, CSA* • Spring return 3/10 sec. (size S),
Delivery: Linear unit, suitable for all ..Max-..-F
UL*, CSA* *…-A version only 20 sec. (size M) ¹
*…-A version only actuators size S or M.
• Control mode On-off, 3-pos., 0-10 VDC,
Required accessories: 4-20 mA ¹
Valve adaptation in accordance with valve man- • Aluminium housing, IP66 ²
ufacturer, type and nominal size (diameter), • Ambient temperature −20…+40 °C (T6),
terminal box, mounting bracket. −20…+50 °C (T5)
Ordering example: • Weight (incl. actuator) ~ 8 kg (size S),
Modulating valve actuator with spring return ~ 14 kg (size M) ¹
in Ex area zone 2, for a globe valve with • External terminal box optional ²
20 mm stroke and a required force of 1.500 N.
¹ in acc. with type | ² applies for actuator
Actuator: RedMax-30-YF
Linear adaptation: LIN-20
Valve adaptation: suitable for valve type on requ.
Required: Ex terminal box (RedBox-Y/S)
Required: Mounting bracket (MKK-M)

Linear unit for actuators with spring return, 24 to 240 VAC/DC

Type Stroke (max.) Description
LIN-7.5 7,5 mm Linear unit up to max. 7,5 mm stroke, suitable for all ..Max-…-F actuators size S or M with spring return
LIN-10 10 mm Linear unit up to max. 10 mm stroke, suitable for all ..Max-…-F actuators size S or M with spring return
LIN-15 15 mm Linear unit up to max. 15 mm stroke, suitable for all ..Max-…-F actuators size S or M with spring return
LIN-20 20 mm Linear unit up to max. 20 mm stroke, suitable for all ..Max-…-F actuators size S or M with spring return
LIN-30 30 mm Linear unit up to max. 30 mm stroke, suitable for all ..Max-…-F actuators size S or M with spring return
LIN-40 42 mm Linear unit up to max. 42 mm stroke, suitable for all ..Max-…-F actuators size M with spring return
Additional price for adaptation, dependent on valve manufacturer, valve type and stroke.

LIN Special options for linear unit suitable for actuators

Explosion proof/ Safe area Features LIN-…-CT
LIN-…CT Special options Description Basics
available for linear CT version with aluminium housing and offshore/marine
unit LIN-.. coating, resistant against corrosive and maritime atmos- CT:
In accordance with phere, some parts nickel plated. • Offshore / marine coated aluminium housing
..Max type for use in • Resistant against corrosive and / or maritime atmosphere
Ex area or safe area Delivery: 1 linear unit with special option
Ordering example: LIN-20-CT

LIN-.. options
Type Description/Technical data
LIN-..-CT Offshore / marine coated aluminium housing, resistant against corrosive and /or maritime atmosphere. Lifting rod, connecting parts and screws in VA (surcharge)
ADLIN Different adaptations for different valves available. Please don‘t hesitate to ask for technical solution
Additional price for adaptation in stainless steel (VA) for CT version.

18 www.schischek.com
Price list Catalogue
Product 2021

Mounting variations Valve adaptation

To select the right valve adaptation and get the
right price information the following data are
required:
1. Valve manufacturer
2. Valve type
3. Valve nominal size (diameter) DN
For adaptations which are already designed by
Schischek this information is sufficient.
To design new adaptations we need additional
details of the valve body as well as drawings.
With the purchase order you have to provide
Actuator ..Max-..-F LIN-.. Adaption Valve actuator with spring return actuator and valve type.

Selection of recommended actuators in relation of force and max. stroke

At strokes between
two values use the
next higher linear unit
e.g. 24 mm stroke = LIN-30

Attention: Limitation of resolution at YF-actuators with strokes < nominal (motor blockade) !
Note the maximum force of the actuator to prevent damage to your valve !
Info: Suitable actuators with spring return see page 10-15.

Nominal force (N) at spring of actuator in relation of max. stroke of LIN at temperatures between −20…+40 °C
Type

Attention: Limitation of resolution at YF-actuators with strokes < nominal (motor blockade) !
Note the maximum force of the actuator to prevent damage to your valve !

Nominal force (N) at spring of actuator in relation of max. stroke of LIN at temperatures between 0…+40 °C
Type

Attention: Above mentioned values are nominal trusts with performed self adjustment drive !
The maximum trusts can read values which are up to three to four times higher than values of tables !
Without performed self adjustment drive there can occur much higher trust values, which can cause damages on the mentioned valve or linkages !
Spring return time depends on the effective required thrust and can exceed standard values !

Force

Schematic diagram
Open Close

www.schischek.com 19
Price list Catalogue
Product 2021

ExRun/ RedRun/ InRun Valve actuators

Explosion proof Industrial Features of ExRun-.., RedRun-.., InRun-..
ExRun-.. RedRun-.. InRun-.. Description Basics
Zone 1, 2, 21, 22 Zone 2, 22 NOT Explosion proof ExRun-.., RedRun-.. and InRun-.. valve • 24…240 VAC/DC self adaptable power supply
Gas + Dust Gas + Dust and only for actuators are used for automation of 2- and • Up to 5 different running times adjustable on site
certified according to certified according to use in safe area 3-way valves with 3-pos. on-off or modula- • 5 to 60 mm stroke, mechanical limitation
ATEX, IECEx, EAC, ATEX, IECEx, EAC, IP66 ting mode. on each position
INMETRO, KOSHA, INMETRO, KOSHA, • Automatic adaptation of modulating signal
UL*, CSA* UL*, CSA* Delivery: at Ex-, Red-, InRun-…-Y..
*…-A version only *…-A version only 1 actuator with integrated Ex-e terminal • Aluminium housing IP66, integrated
box, Emergency manual override. terminal box
• −20…+40°C/ +50°C, integrated heater
Required accessories: • Emergency manual override
Valve adaptation in accordance with • Dimension (H 1 ×W×D) 260 1 × 208 × 115 mm
valve manufacturer, type and nominal size (without valve and adaptation)
(diameter). • Approximate weight 7,3…7,7 kg 2
(without valve and adaptation)
1
Height varies depending on type
2
Weight varies depending on type

Ex-d valve actuators without spring return for zone 1, 2, 21, 22

Type Force Running time Spring return Control mode Feedback Stroke Size
ExRun- 5.10 500 / 1.000 N 2/3/6/9/12 sec/mm - On-off, 3-pos - 5…60 mm S
ExRun-25.50 2.500 / 5.000 N 2/3/6/9/12 sec/mm - On-off, 3-pos - 5…60 mm S
ExRun-75.100 7.500 / 10.000 N 4/6/9/12/15 sec/mm - On-off, 3-pos - 5…60 mm S
ExRun- 5.10 -Y 500 / 1.000 N 2/3/6/9/12 sec/mm - 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA 5…60 mm S
ExRun-25.50 -Y 2.500 / 5.000 N 2/3/6/9/12 sec/mm - 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA 5…60 mm S
ExRun-75.100-Y 7.500 / 10.000 N 4/6/9/12/15 sec/mm - 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA 5…60 mm S
ExRun- 5.10 -U 500 / 1.000 N 2/3/6/9/12 sec/mm - On-off, 3-pos 0…10 VDC, 4...20 mA 5…60 mm S
ExRun-25.50 -U 2.500 / 5.000 N 2/3/6/9/12 sec/mm - On-off, 3-pos 0…10 VDC, 4...20 mA 5…60 mm S
ExRun-75.100-U 7.500 / 10.000 N 4/6/9/12/15 sec/mm - On-off, 3-pos 0…10 VDC, 4...20 mA 5…60 mm S

Ex-d valve actuators without spring return for zone 2, 22

Type Force Running time Spring return Control mode Feedback Stroke Size
RedRun- 5.10 500 / 1.000 N 2/3/6/9/12 sec/mm - On-off, 3-pos - 5…60 mm S
RedRun-25.50 2.500 / 5.000 N 2/3/6/9/12 sec/mm - On-off, 3-pos - 5…60 mm S
RedRun-75.100 7.500 / 10.000 N 4/6/9/12/15 sec/mm - On-off, 3-pos - 5…60 mm S
RedRun- 5.10 -Y 500 / 1.000 N 2/3/6/9/12 sec/mm - 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA 5…60 mm S
RedRun-25.50 -Y 2.500 / 5.000 N 2/3/6/9/12 sec/mm - 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA 5…60 mm S
RedRun-75.100-Y 7.500 / 10.000 N 4/6/9/12/15 sec/mm - 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA 5…60 mm S
RedRun- 5.10 -U 500 / 1.000 N 2/3/6/9/12 sec/mm - On-off, 3-pos 0…10 VDC, 4...20 mA 5…60 mm S
RedRun-25.50 -U 2.500 / 5.000 N 2/3/6/9/12 sec/mm - On-off, 3-pos 0…10 VDC, 4...20 mA 5…60 mm S
RedRun-75.100-U 7.500 / 10.000 N 4/6/9/12/15 sec/mm - On-off, 3-pos 0…10 VDC, 4...20 mA 5…60 mm S

Valve actuators without spring return for safe area

Type Force Running time Spring return Control mode Feedback Stroke Size
InRun- 5.10 500 / 1.000 N 2/3/6/9/12 sec/mm - On-off, 3-pos - 5…60 mm S
InRun-25.50 2.500 / 5.000 N 2/3/6/9/12 sec/mm - On-off, 3-pos - 5…60 mm S
InRun-75.100 7.500 / 10.000 N 4/6/9/12/15 sec/mm - On-off, 3-pos - 5…60 mm S
InRun- 5.10 -Y 500 / 1.000 N 2/3/6/9/12 sec/mm - 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA 5…60 mm S
InRun-25.50 -Y 2.500 / 5.000 N 2/3/6/9/12 sec/mm - 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA 5…60 mm S
InRun-75.100-Y 7.500 / 10.000 N 4/6/9/12/15 sec/mm - 0…10 VDC, 4...20 mA 0…10 VDC, 4...20 mA 5…60 mm S
InRun- 5.10 -U 500 / 1.000 N 2/3/6/9/12 sec/mm - On-off, 3-pos 0…10 VDC, 4...20 mA 5…60 mm S
InRun-25.50 -U 2.500 / 5.000 N 2/3/6/9/12 sec/mm - On-off, 3-pos 0…10 VDC, 4...20 mA 5…60 mm S
InRun-75.100-U 7.500 / 10.000 N 4/6/9/12/15 sec/mm - On-off, 3-pos 0…10 VDC, 4...20 mA 5…60 mm S

20 www.schischek.com
Price list Catalogue
Product 2021

Accessories
Type Description/Technical data
ExSwitch-R-L External, adaptable, on site adjustable Ex-d auxiliary switch linear for Ex/RedRun-.. with 2 potential free contacts, additionally Ex-e terminal box + mounting bracket necessary
InSwitch- R-L External, adaptable, on site adjustable auxiliary switch linear for InRun-.. with 2 potential free contacts, additionally terminal box + mounting bracket necessary
ExBox- SW Ex-e terminal box suitable for ExRun.. valve-actuators with external switches ExSwitch-R-L
RedBox-SW Ex-e terminal box suitable for RedRun.. valve-actuators with external switches ExSwitch-R-L
InBox- SW Terminal box suitable for InRun.. valve-actuators with external switches InSwitch-R-L
MKK-S Mounting-bracket suitable for ..Box-terminal boxes for direct mounting on ..Run actuators size S
HV-R Manual override suitable for ..Run valve actuators size S
GMB-1 Rubber bellow up to 60 mm, colour black
ADR Different adaptations for different valves available. Please don‘t hesitate to ask for technical solution
Special options and offshore kits see page 23

Required data for valve adaptation …Run + valve adaptation

To select the right valve adaptation and get the right price information the ExRun-…
following data are required:
1. Valve manufacturer
RedRun-…
2. Valve type InRun-…
3. Valve nominal size (diameter) DN
For adaptations which are already designed by Schischek this information
is sufficient.
To design new adaptations we need additional details of the valve body
as well as drawings.
With the purchase order you have to provide actuator and valve type.
Adaption

www.schischek.com 21
Price list Catalogue
Product 2021

VA/CT Special options actuators – overview

Overview of special options of Schischek actuators for use under extreme weather conditions
Application area: Advantages:
Usage in hazardous locations under extreme weather conditions and / or for • Resistant against corrosive and / or maritime atmosphere
offshore /onshore applications. • Usage under extreme weather conditions
• Approved for offshore- / onshore applications
• Robust and thereby extended period of application time of actuators

Special options quarter turn actuators size S ..Max-.. ¼ turn actuators size S

VAS ..Max-.. S Housing material in stainless steel (VAS) or alu-

minium housing with offshore/marine coating (CTS)
CTS for use under extreme weather conditions.

normal wiring VAS CTS

Special options quarter turn actuators size M ..Max-.. ¼ turn actuators size M

VAM ..Max-.. M Housing material in stainless steel (VAM) or alu­

minium housing with offshore/marine coating (CTM)
CTM for use under extreme weather conditions.

normal wiring VAM CTM

Special options valve actuators ..Run-.. valve actuators

Aluminium housing with offshore/marine coating
CTS ..Run-.. (CTS) for use under extreme weather conditions.

normal wiring CTS

Weather shield for quarter turn and valve actuators ..Max-.. ¼ turn and ..Run valve actuators

WS-S ..Max-.. S/M Weather shield made of stainless steel for protec-
tion against weather influences like rain, sun or
WS-M ..Run-.. snow.
WS-R

normal wiring WS-S WS-M WS-R

Safe area Ex area

Further special features on request

• Connection technology and cable fittings
• Special model for temperature range, runtime, corrosion protection, certification, …
• Special accessories, for e.g. indicators
• Special features, e.g > 90° angle of rotation or rotary variants

22 www.schischek.com
Price list Catalogue
Product 2021

..Max Special options for quarter turn actuators size S or M

Explosion proof Features ..Max-…VA/ CT
..Max-…VA/CT Special options Description Basics
available for ExMax, VA version with housing material in stainless steel similar VA:
RedMax and InMax AISI 316, some parts nickel plated. • Housing material in stainless steel similar AISI 316,
In accordance with type CT version with aluminium housing and offshore/marine some parts nickel plated, screws in stainless steel
for use in coating, resistant against corrosive and maritime atmos- CT:
Ex area or safe area phere, some parts nickel plated. • offshore / marine coated aluminium housing, resistant
against corrosive and / or maritime atmosphere
Delivery: 1 quarter turn actuator size S or M • Cable glands brass nickel plated
with special option • Screws in stainless steel
Ordering example: ExMax-15.30-VAS For general basics see ..Max quarter turn actuators.

..Max-.. options
Type Description/Technical data
..Max-…- VAS Housing material of ..Max quarter turn actuator size S in stainless steel similar AISI 316, some parts nickel plated (surcharge)
..Max-…- VAM Housing material of ..Max quarter turn actuator size M in stainless steel similar AISI 316, some parts nickel plated (surcharge)
..Max-…- CTS Aluminium housing of ..Max quarter turn actuator size S with offshore/marine coating, resistant against corrosive and maritime atmosphere, some parts nickel plated (surcharge)
..Max-…- CTM Aluminium housing of ..Max quarter turn actuator size M with offshore/marine coating, resistant against corrosive and maritime atmosphere, some parts nickel plated (surcharge)
..Box-…/ VA Ex-e terminal-box, housing made of stainless-steel type AISI 316 L, some parts nickel plated (surcharge)
..Box-…/ CT Ex-e terminal-box, housing offshore / marine coated, resistant against corrosive /maritime atmosphere, some parts nickel plated (surcharge)
..Switch- CT Auxiliary switch for ..Max.., housing offshore / marine coated, resistant against corrosive /maritime atmosphere, some parts nickel plated (surcharge)
MKK- S/VA Mounting bracket, made of stainless-steel suitable for ..Box...VA for direct coupling to ..Max actuators size S
MKK- M/VA Mounting bracket, made of stainless-steel suitable for ..Box...VA for direct coupling to ..Max actuators size M
Kit-S8-Max Cable glands 2 × M16 × 1,5 mm Ex-e standard Ø 5-10 mm in brass nickel plated, 1 blind plug for replace the plastic version of quarter turn actuator ..Max
Kit-S8-Box Cable glands 4 × M20 × 1,5 mm Ex-e Ø 6-13 mm, brass nickel plated, for replace the plastic version of terminal ..Box
Kit-Offs-PMC-1C Protection metal conduit incl. SS terminal box and glands for 1 armoured cable
Kit-Offs-PMC-2C Protection metal conduit incl. SS terminal box and glands for 2 armoured cables
WS-S Weather shield in stainless steel, suitable for all ..Max actuators size S
WS-M Weather shield in stainless steel, suitable for all ..Max actuators size M

..Run Special options for valve actuators

Explosion proof Features ..Run-…CTS
..Run-…CTS Special options Description Basics
available for ExRun, CTS version with aluminium housing and offshore/ CTS:
RedRun and InRun marine coating, resistant against corrosive and maritime • offshore / marine coated aluminium housing, resistant
In accordance with type atmosphere, some parts nickel plated. against corrosive and / or maritime atmosphere
for use in • Cable glands brass nickel plated
Ex area or safe area Delivery: 1 valve actuator with • Screws in stainless steel
special option For general basics see ..Run valve actuators.
Ordering example: ExRun-25.50-CTS

..Run-.. options
Type Description/ Technical data
..Run-…-CTS Aluminium housing with offshore/marine coating for ..Run valve actuator, resistant against corrosive /maritime atmosphere, some parts nickel plated (surcharge)
Kit-S8- Run Cable glands 2 × M20 × 1,5 mm Ex-e Ø 6-13 mm, brass nickel plated, for replace the plastic version of valve actuators ..Run
Kit-Offs-GL-Run Cable glands 2 × M25 × 1,5 mm Ex-d in brass nickel plated for armoured cables suitable for ..Run valve actuators
WS-R Weather shield in stainless steel, suitable for all ..Run valve actuators

www.schischek.com 23
Price list Catalogue
Product 2021

ExPolar/ InPolar Heating system – overview

Overview of new heating system for use with Schischek actuators down to −50°C
Application area: Advantages:
Usage in hazardous locations for temperatures down to −50 °C. • Especially for usage under high sub-zero temperatures down to −50°C
• Usage directly in hazardous locations (only ExPolar)
• Adaptable on Schischek actuator series type ..Max size S or M

Heating system for quarter turn actuators ExMax size S ExPolar-..-MS

°C ExPolar-..-MS Adaptable on Schischek quarter turn actuators type

ExMax-.. size S.

normal wiring

Heating system for quarter turn actuators ExMax size M ExPolar-..-MM

°C ExPolar-..-MM Adaptable on Schischek quarter turn actuators type

ExMax-.. size M.

normal wiring

Safe area Ex area

24 www.schischek.com
Price list Catalogue
Product 2021

ExPolar/ InPolar Heating system for ¼ turn actuators ..Max-.. size S

Explosion proof Industrial Features ..Polar-…-MS
ExPolar-…-MS InPolar-…-MS Description Basics
Hazardous Location Safe Area Controlled heating system for use in sub- • 24/48 VAC/DC, 120/240 VAC
zero regions down to −50 °C. • 60 W
Adaptable on Schischek quarter turn actua- • −50 °C… +60 °C
tors ..Max-.. size S (depending on type). • ExPolar for zone 1, 2, 21, 22
• InPolar for safe area
Delivery: 1 heating system
(adaptable)
Ordering example: ExPolar-240-MS

ExPolar-…-MS/InPolar-…-MS
Type Adaptable on Operation temperature Supply Power* Installation area
ExPolar-…-MS ExMax-.. /RedMax size S −50 °C up to +60 °C 24 VAC/DC 48 VAC/DC 120 VAC 240 VAC 60 W zone 1, 2, 21, 22
InPolar- …-MS InMax-.. size S −50 °C up to +60 °C 24 VAC/DC 48 VAC/DC 120 VAC 240 VAC 60 W safe area
Supply voltage *Nominal value
Not suitable for VA versions !

ExPolar/ InPolar Heating system for ¼ turn actuators ..Max-.. size M

Explosion proof Industrial Features ..Polar-…-MM
ExPolar-…-MM InPolar-…-MM Description Basics
Hazardous Location Safe Area Controlled heating system for use in sub- • 24/48 VAC/DC, 120/240 VAC
zero regions down to −50 °C. • 60 W
Adaptable on Schischek quarter turn actua- • −50 °C… +60 °C
tors ..Max-.. size M (depending on type). • ExPolar for zone 1, 2, 21, 22
• InPolar for safe area
Delivery: 1 heating system
(adaptable)
Ordering example: ExPolar-240-MM

ExPolar-…-MM/InPolar-…-MM
Type Adaptable on Operation temperature Supply Power* Installation area
ExPolar-…-MM ExMax-.. /RedMax size M −50 °C up to +60 °C 24 VAC/DC 48 VAC/DC 120 VAC 240 VAC 60 W zone 1, 2, 21, 22
InPolar- …-MM InMax-.. size M −50 °C up to +60 °C 24 VAC/DC 48 VAC/DC 120 VAC 240 VAC 60 W safe area
Supply voltage *Nominal value
Not suitable for VA versions !

Special option
Type Description/ Technical data
…Polar-…-…-CT Housing offshore / marine coated, resistant against corrosive /maritime atmosphere, some parts nickel plated (surcharge)

ExArctic/ InArctic Heating system for actuators ..Max /..Run/..Max +LIN

Explosion proof Industrial Features ..Arctic-..
ExArctic-M | ExArctic-R InArctic-M | InArctic-R Description Basics
Hazardous Location Safe Area Controlled heating system with protective • −60 °C
housing for use down to −60 °C. • ExArctic for hazardous locations
Suitable for Schischek actuators ..Max size • InArctic for safe area
S and M as well as for valve actuators ..Run • details and prices on request
/ ..Max + LIN. • subject to change

Delivery: 1 heating system

1 protective housing
Schematic visualisation Schematic visualisation
1 mounting material set

www.schischek.com 25
Price list Catalogue
Product 2021

ExReg – HVAC control unit for hazardous locations!

Control applications for VAV/ CAV, pressure, temperature and humidity ...

HAZARDOUS LOCATIONS ZONE 1, 2, 21, 22

DECENTRALISED CONTROL STRUCTURES

REDUCED LIFE-CYCLE-COSTS

NO INTRINSIC SAFE CIRCUITS NEEDED

INTEGRAL PID LOOP

COMPATIBILITY TO MARKET STANDARDS PREDEFINED SETTINGS

PREDEFINED DAMPER CHARACTERISTICS

26 www.schischek.com
Price list Catalogue
Product 2021

ExReg-../ InReg-.. Control systems – overview

Overview of ExReg-.. and InReg-.. control technology
Installation areas: The new control systems concept offers especially in Ex-area huge benefits:
ExReg-.........................................Modules for use in hazardous locations zone 1, 2, 21, 22
1. Usage directly in hazardous locations in zone 1, 2, 21, 22
InReg-..........................................Modules for safe area
2. Can be configured on site in the hazardous location
Application areas: 3. Decentralised control structures
ExReg/ InReg-V...........................Modules for volume flow control (CAV/VAV) 4. Fewer components
ExReg/ InReg-V...........................Modules for differential pressure control (ΔP) 5. Reduced Life-Cycle-Costs
6. No necessity to install safety barriers or to use special wiring
7. Integral PID loop
8. Optional in stainless steel (AISI 316) or with offshore/marine coating
9. Predefined Settings and damper characteristics
10. Cost effective

Volume flow (CAV/ VAV) / Pressure ΔP ExReg-V-.., InReg-V-..

Control of air flows and pressure in ventilation
VAV ExReg-V systems for building management control equip-
ΔP ment, for chemical, pharmaceutical, industrial and
VAV offshore plants directly in hazardous locations zones
1, 2 (gas) and 21, 22 (dust), (InReg-V-.. in safe area).
To complete the technical solution on a ventilation
damper (with orifice plate and known shield/k-
factor) an additional actuator type ExMax-...-CY or
ExMax-...-CYF (with fail safe spring return) is required.
normal wiring

Safe area Ex area

www.schischek.com 27
Price list Catalogue
Product 2021

ExReg-V../ InReg-V.. Volume flow and pressure controller CAV/VAV

VAV applications in a typical HVAC system

Restrictor Air damper

P M
Ex area

VAV
Safe area

PLC-System

Controller

ExReg-V..
Differential pressure
• 0…100/300/1.000 Pa,
depending on type (VAV)

28 www.schischek.com
Price list Catalogue
Product 2021

ExReg-V../ InReg-V.. Volume flow and pressure controller CAV/VAV

Explosion proof Industrial Features of ExReg-V.., InReg-V..
ExReg-V.. InReg-V.. Description Basics
Zone 1, 2, 21, 22 NOT explosion proof Compact controller for use in hazardous • No additional module in the panel required
Gas + Dust and only for areas zone 1, 2, 21, 22 or in safe area • No intrinsically safe wiring required
certified according to use in safe area (depending on type) for control/regulation • Adjustable “k-factor”
ATEX, IECEx IP66 of air/gas flows and pressure in ventilation • Measurement range 0…100/300/1.000 Pa
systems. VAV control must be tested by the • 24 VAC/DC
manufacturerer of VAV dampers in acc. with • Switch-on delay 3 seconds
diameter, design and characteristics of the • Air volume monitoring
air damper ! • PID controller
Suitable actuator ..Max-...-CY or ..Max-...- • Programmable w/o additional tools
CYF available separately. • Alarm with alarm delay function
• LCD backlight (which can be switched off)
Delivery: • Aluminium housing, protection IP66
Electric volume flow / pressure controller • Integrated terminal box (ExReg.. with “Ex-e”)
with integrated terminal box (ExReg.. with • Optional offshore / marine coated or stain-
“Ex-e”), 3 tapping screws, short circuit tube less steel edition
• H × W × D = 180 × 107 × 66 mm

ExReg-V.. Volume flow and pressure controller for zone 1, 2, 21, 22

Type Sensor Supply Meas. range Connection / Interface (analogue) Installation
ExReg-V100-A Differential pressure 24 VAC/DC 0…100 Pa 1 × actuator, 1 × set point, 1 × actual value, 1 × position actuator zone 1, 2, 21, 22
ExReg-V300-A Differential pressure 24 VAC/DC 0…300 Pa 1 × actuator, 1 × set point, 1 × actual value, 1 × position actuator zone 1, 2, 21, 22
ExReg-V1000-A Differential pressure 24 VAC/DC 0…1.000 Pa 1 × actuator, 1 × set point, 1 × actual value, 1 × position actuator zone 1, 2, 21, 22

InReg-V.. Volume flow and pressure controller for safe area

Type Sensor Supply Meas. range Connection / Interface (analogue) Installation
InReg-V100-A Differential pressure 24 VAC/DC 0…100 Pa 1 × actuator, 1 × set point, 1 × actual value, 1 × position actuator safe area
InReg-V300-A Differential pressure 24 VAC/DC 0…300 Pa 1 × actuator, 1 × set point, 1 × actual value, 1 × position actuator safe area
InReg-V1000-A Differential pressure 24 VAC/DC 0…1.000 Pa 1 × actuator, 1 × set point, 1 × actual value, 1 × position actuator safe area

Actuators for ..Reg.. controller

Type Torque Running time 90° Spring return Control mode Feedback Features Size
ExMax- 5.10-CY 5 Nm / 10 Nm 7,5/15/30/60/120 sec. - 4...20 mA 0…10 V combination with ExReg.. S
ExMax-15.30-CY 15 Nm / 30 Nm 7,5/15/30/60/120 sec. - 4...20 mA 0…10 V combination with ExReg.. S
ExMax- 5.10-CYF 5 Nm / 10 Nm 7,5/15/30/60/120 sec. ~ 10 sec. 4...20 mA 0…10 V combination with ExReg.. S
ExMax-15- CYF 15 Nm 7,5/15/30/60/120 sec. ~ 10 sec. 4...20 mA 0…10 V combination with ExReg.. S
InMax- 5.10-CY 5 Nm / 10 Nm 7,5/15/30/60/120 sec. - 4...20 mA 0…10 V combination with InReg.. S
InMax- 15.30-CY 15 Nm / 30 Nm 7,5/15/30/60/120 sec. - 4...20 mA 0…10 V combination with InReg.. S
InMax- 5.10-CYF 5 Nm / 10 Nm 7,5/15/30/60/120 sec. ~ 10 sec. 4...20 mA 0…10 V combination with InReg.. S
InMax- 15- CYF 15 Nm 7,5/15/30/60/120 sec. ~ 10 sec. 4...20 mA 0…10 V combination with InReg.. S

Accessories
Type Description/Technical data
MKR-VA/AL Mounting bracket for installation on round air-ducts (diameter up to 600 mm)
Kit 2 Includes 2 meter pressure hose (inner diameter 6 mm) and 2 plastic fittings
Special options and offshore kits see page 48

www.schischek.com 29
Price list Catalogue
Product 2021

ExCos – Analog sensor series for hazardous locations!

Measurement applications for differential pressure, temperature and humidity ...

HAZARDOUS LOCATIONS ZONE 1, 2, 21, 22

NO TRANSMITTER IN PANEL NEEDED

NO INTRINSIC SAFE CIRCUITS NEEDED

EASY INSTALLATION

EASY PARAMETERISATION

REDUCED INSTALLATION COST

ACTUAL VALUE INDICATION OFFSHORE/MARINE COATED VERSION

STAINLESS STEEL SOLUTION

30 www.schischek.com
Price list Catalogue
Product 2021

Content overview
Installation areas
Gas Dust Gas Dust Gas Dust
Product series Page 0 20 1 21 2 22 SA*
Analog sensors for measuring of volume flow, temperature, humidity, pressure/differential pressure
Overview analog sensors 30/36
ExCos-P differential pressure, VAV sensors ± 100… 7.500 Pa 37    
RedCos-P differential pressure, VAV sensors ± 100… 7.500 Pa 37  
InCos-P differential pressure, VAV sensors ± 100… 7.500 Pa 37 
ExCos-D temperature and humidity transmitter for ExPro-C… sensors 34    
RedCos-D temperature and humidity transmitter for ExPro-C… sensors 34  
InCos-D temperature and humidity transmitter for InPro-C… sensors 34 
ExPro-C… temperature and humidity sensors for operation in HVAC systems 35    
InPro-C… temperature and humidity sensors for operation in HVAC systems 35 
ExLine transmitter EXL-IM-9182-… for passive, potential free, analog ExSens sensors 36 
ExSens analog, passive temperature- /humidity- /pressure sensors 37 () ()  ()  
Special options for sensors
Overview special options for sensors 48
Overview heating system ..Polar for sensors 49
ExPolar / ExArctic heating system for sensors’ use in Ex areas down to −40 /−60 °C 49    
InPolar / InArctic heating system for sensors’ use in safe area down to −40 /−60 °C 49 
*SA = Safe area () = on request

www.schischek.com 31
Price list Catalogue
Product 2021

ExCos-../ RedCos-../ InCos-.. Sensors with analog output – Overview

Overview of the ExCos-.., RedCos-.. and InCos-.. sensor technology
Installation areas: The sensor concept offers especially in Ex-area huge benefits:
ExCos-.............................................. Sensors for use in hazardous locations zone 1, 2, 21, 22 1. No intrinsically safe wiring required between the control panel and the sensor
RedCos- ........................................... Sensors for use in hazardous locations zone 2, 22 2. No intrinsically safe circuit necessary inside the control panel
InCos-............................................... Sensors for safe area 3. No transmitter needed in the electrical control panel
Application areas: 4. Reduced installation cost
Ex/ Red/ InCos-P.............................. Sensors for pressure and differential pressure 5. Easy installation
Ex/ Red/ InCos-D + ..Pro-C.............. Sensors (active) for temperature and /or humidity 6. Easy parameterisation
EXL-IM-9182-.. (Ex-i) + ExSens....... Sensors (passive) for temperature, humidity 7. Cost savings for electrical components
and potentiometer 8. Actual value indication
9. Optional in stainless steel (AISI 316) or with offshore/marine coating

Pressure, Differential Pressure, VAV – analog, active ExCos-P-.., RedCos-P-.., InCos-P-.. Sensors

ΔP ExCos-P Transmitter with integrated differential-pressure

sensor for direct connection of the air-hoses.
ΔP
IP66 aluminium housing with integrated terminal-
box. Measuring range parametrizable on site.
Outputs 0…10 V/4…20 mA. Integrated actual value
indication, illuminated.
normal wiring

Temperature and/ or Humidity – analog, active ExCos-D, RedCos-D, InCos-D Transmitter +

ExPro-C.., InPro-C.. sensor
°C ExCos-D Duct sensor
Transmitter for the installation of an ExPro-C.. or
%rH + ExPro-C.. InPro-C.. (with InCos-D) for temperature °C and /
or humidity in %. IP66 aluminium housing with
integrated terminal box. Measuring range para-
metrizable on site. Outputs 0…10 V/ 4…20 mA.
normal wiring Integrated actual value indication, illuminated.
Room sensor

Temperature, Humidity, Potentiometer – analog, passive EXL-IM-.. transmitter + ExSens sensor

°C EXL-IM-.. Transmitter for a connection of an passive, analog

ExSens sensor type Pt 100, Ni 1000, 0…10 kΩ over
%rH + ExSens Ex-i electrical conduit. Installation in control box onto
Ex-i wiring DIN-rail. Measuring range parametrizable on site.
(intrinsically safe) Outputs 4…20 mA (with additional plug 0…10 V).

normal wiring

Safe area Ex area

32 www.schischek.com
Price list Catalogue
Product 2021

ExCos-P/ RedCos-P/ InCos-P Differential pressure transmitter

Explosion proof Industrial Features of ExCos-P-.., RedCos-P-.., InCos-P-..
ExCos-P-.. RedCos-P-.. InCos-P-.. Description Basics
Zone 1, 2, 21, 22 Zone 2, 22 NOT Explosion proof ExCos-P-.., RedCos-P-.. and InCos-P-.. • No additional module in the panel required !
Gas + Dust Gas + Dust and only for are pressure transmitter for HVAC systems, • No intrinsically safe wiring required !
certified according to certified according to use in safe area e.g. for differential pressure control. • 24 VAC/ DC supply
ATEX, IECEx, ATEX, IECEx, IP66 • Outputs 0…10 V, (0)4…20 mA selectable
EAC, KOSHA EAC, CSA Delivery: • Measurement range adjustable
1 sensor with integrated terminal box, • Actual value indication (which can be
3 tapping screws, short circuit tube switched off)
• All parameters can be adjusted on site
without additional tools and measurement
devices
• Aluminium housing IP66
• Integrated terminal box (ExCos.. with “Ex-e”)
• Dimensions (H × W × D) 180 × 107 × 66 mm

ExCos-P-.. Differential pressure and volume control transmitter for zone 1, 2, 21, 22
Type Max. range Overload protected Measurement range, min. 20% of max. range Installation module
ExCos-P- 100 ± 100 Pa up to 25.000 Pa ± Measurement range free adjustable, min. range 20 Pa zone 1, 2, 21, 22
ExCos-P- 250 ± 250 Pa up to 25.000 Pa ± Measurement range free adjustable, min. range 50 Pa zone 1, 2, 21, 22
ExCos-P- 500 ± 500 Pa up to 50.000 Pa ± Measurement range free adjustable, min. range 100 Pa zone 1, 2, 21, 22
ExCos-P-1250 ± 1.250 Pa up to 50.000 Pa ± Measurement range free adjustable, min. range 250 Pa zone 1, 2, 21, 22
ExCos-P-2500 ± 2.500 Pa up to 50.000 Pa ± Measurement range free adjustable, min. range 500 Pa zone 1, 2, 21, 22
ExCos-P-5000 ± 5.000 Pa up to 75.000 Pa ± Measurement range free adjustable, min. range 1.000 Pa zone 1, 2, 21, 22
ExCos-P-7500 ± 7.500 Pa up to 120.000 Pa ± Measurement range free adjustable, min. range 1.500 Pa zone 1, 2, 21, 22

RedCos-P-.. Differential pressure and volume control transmitter for zone 2, 22

Type Max. range Overload protected Measurement range, min. 20% of max. range Installation module
RedCos-P- 100 ± 100 Pa up to 25.000 Pa ± Measurement range free adjustable, min. range 20 Pa zone 2, 22
RedCos-P- 250 ± 250 Pa up to 25.000 Pa ± Measurement range free adjustable, min. range 50 Pa zone 2, 22
RedCos-P- 500 ± 500 Pa up to 50.000 Pa ± Measurement range free adjustable, min. range 100 Pa zone 2, 22
RedCos-P-1250 ± 1.250 Pa up to 50.000 Pa ± Measurement range free adjustable, min. range 250 Pa zone 2, 22
RedCos-P-2500 ± 2.500 Pa up to 50.000 Pa ± Measurement range free adjustable, min. range 500 Pa zone 2, 22
RedCos-P-5000 ± 5.000 Pa up to 75.000 Pa ± Measurement range free adjustable, min. range 1.000 Pa zone 2, 22
RedCos-P-7500 ± 7.500 Pa up to 120.000 Pa ± Measurement range free adjustable, min. range 1.500 Pa zone 2, 22

InCos-P-.. Differential pressure and volume control transmitter for safe area
Type Max. range Overload protected Measurement range, min. 20% of max. range Installation module
InCos-P- 100 ± 100 Pa up to 25.000 Pa ± Measurement range free adjustable, min. range 20 Pa safe area
InCos-P- 250 ± 250 Pa up to 25.000 Pa ± Measurement range free adjustable, min. range 50 Pa safe area
InCos-P- 500 ± 500 Pa up to 50.000 Pa ± Measurement range free adjustable, min. range 100 Pa safe area
InCos-P-1250 ± 1.250 Pa up to 50.000 Pa ± Measurement range free adjustable, min. range 250 Pa safe area
InCos-P-2500 ± 2.500 Pa up to 50.000 Pa ± Measurement range free adjustable, min. range 500 Pa safe area
InCos-P-5000 ± 5.000 Pa up to 75.000 Pa ± Measurement range free adjustable, min. range 1.000 Pa safe area
InCos-P-7500 ± 7.500 Pa up to 120.000 Pa ± Measurement range free adjustable, min. range 1.500 Pa safe area

Accessories and special designs

Type Description/Technical data
MKR-VA/AL Mounting bracket for installation on round air-ducts (diameter up to 600 mm)
Kit 2 Includes 2 meter pressure hose (inner diameter 6 mm) and 2 plastic fittings
Special options and offshore kits see page 48

www.schischek.com 33
Price list Catalogue
Product 2021

ExCos-D/ RedCos-D/ InCos-D Temperature /humidity transmitter

Explosion proof Industrial Features ExCos-D, RedCos-D, InCos-D
ExCos-D RedCos-D InCos-D Description Basics
Zone 1, 2, 21, 22 Zone 2, 22 NOT Explosion proof ExCos-D, RedCos-D and InCos-D transmit- • No additional module in the panel required !
Gas + Dust Gas + Dust and only for ter together with ExPro -C…/ InPro-C… • No intrinsically safe wiring required !
certified according to certified according to use in safe area sensors are for temperature and / or humid- • 24 VAC/ DC supply
ATEX, IECEx, ATEX, IECEx, IP66 ity measurement in HVAC systems. • Connector for ExPro-C… sensors for room
EAC, KOSHA EAC, CSA Delivery: 1 transmitter with connection for or duct mounting
1 ExPro-C… sensor, 3 tapping screws • Outputs 0…10 V, 4…(0)20 mA selectable
Required accessory (additional price): • Measurement range adjustable
1 ExPro-C… or InPro-C… sensor • Actual value indication (which can be
Ordering example for temperature duct switched off)
sensing in hazardous location in zone 21, • All parameters can be adjusted on site
150 mm sensor tube. without additional tools and measurement
Types to order: devices
1 × ExCos-D • Aluminium housing IP66
1 × ExPro-CT-150 • Integrated terminal box (ExCos.. with “Ex-e”)
• Dimensions (H × W × D) 180 × 107 × 66 mm

ExCos-D temperature-/ humidity module for zone 1, 2, 21, 22

Type Description/Technical data Installation module Installation ExPro sensor
ExCos-D Module to connect 1 ExPro-C… sensor for temperture and /or humidity for use in hazardous locations zone 1, 2, 21, 22 zone 1, 2, 21, 22

RedCos-D temperature-/ humidity module for zone 2, 22

Type Description/Technical data Installation module Installation ExPro sensor
RedCos-D Module to connect 1 ExPro-C… sensor for temperture and /or humidity for use in hazardous locations zone 2, 22 zone 1, 2, 21, 22

InCos-D temperature-/humidity module for safe area

Type Description/Technical data Installation module Installation InPro sensor
InCos-D Module to connect 1 InPro-C… sensor for temperture and / or humidity for use in safe area safe area safe area

Accessories and special designs

Type Description/Technical data
MKR-VA/AL Mounting bracket for installation on round air-ducts (diameter up to 600 mm)
VL3 Sensor extension cable 3 m
Special options and offshore kits see page 48

Example of combinations

34 www.schischek.com
Price list Catalogue
Product 2021

ExPro-C../ InPro-C.. Temperature / humidity sensors

Explosion proof Industrial Features ExPro-C.., InPro-C..
ExPro-C.. InPro-C.. Description Basics
Zone 1, 2, 21, 22 Only for use with ExPro-C.. sensors are used for measurements of • ExPro-C.. Sensors for connection to ExCos-D or
Gas + Dust InCos-D… transmitter! temperature and / or humidity in hazardous locations, RedCos-D transmitter (InPro-C.. sensors for InCos-D
EC type-approved NOT for use in for exclusive use with ExCos-D / RedCos-D transmitter ! transmitter)
with ExCos-D/RedCos-D Ex area! • Mechanical and electrical adaptation via connector
transmitter InPro-C.. sensors are suitable for temperature and / or • ExPro-C../ InPro-C.. sensors can be screwed to the
humidity measurement in safe areas, for exclusive use housing optionally at the back (duct measurement)
with InCos-D transmitter ! or bottom (room measurement)
• When using humidity-sensors, the contamination and
Delivery: 1 sensor with connector aggressiveness of the medium has to be regarded

Example: room-humidity sensor, 50 mm length

Type: 1 x ExPro-CF-50

Attention: only in combination with:

1 × ExCos-D or RedCos-D transmitter
(InCos-D by InPro-C.. sensors)

Sensors for ExCos-D and RedCos-D transmitter

Type Function Range Sensor length Main use Connectable to Installation area
ExPro-CT - 50 Temperature sensor −40…+ 80 °C 50 mm Room/Duct ExCos-D RedCos-D zone 1, 2, 21, 22
ExPro-CT -100 Temperature sensor −40…+ 125 °C 100 mm Duct ExCos-D RedCos-D zone 1, 2, 21, 22
ExPro-CT -150 Temperature sensor −40…+ 125 °C 150 mm Duct ExCos-D RedCos-D zone 1, 2, 21, 22
ExPro-CT -200 Temperature sensor −40…+ 125 °C 200 mm Duct ExCos-D RedCos-D zone 1, 2, 21, 22
ExPro-CF - 50 Humidity sensor 0…100 %rF 50 mm Room/Duct ExCos-D RedCos-D zone 1, 2, 21, 22
ExPro-CF -100 Humidity sensor 0…100 %rF 100 mm Duct ExCos-D RedCos-D zone 1, 2, 21, 22
ExPro-CF -150 Humidity sensor 0…100 %rF 150 mm Duct ExCos-D RedCos-D zone 1, 2, 21, 22
ExPro-CF -200 Humidity sensor 0…100 %rF 200 mm Duct ExCos-D RedCos-D zone 1, 2, 21, 22
ExPro-CTF- 50 Combination temperature /humidity −40…+ 80 °C, 0…100 %rH 50 mm Room/Duct ExCos-D RedCos-D zone 1, 2, 21, 22
ExPro-CTF-100 Combination temperature /humidity −40…+ 125 °C, 0…100 %rH 100 mm Duct ExCos-D RedCos-D zone 1, 2, 21, 22
ExPro-CTF-150 Combination temperature /humidity −40…+ 125 °C, 0…100 %rH 150 mm Duct ExCos-D RedCos-D zone 1, 2, 21, 22
ExPro-CTF-200 Combination temperature /humidity −40…+ 125 °C, 0…100 %rH 200 mm Duct ExCos-D RedCos-D zone 1, 2, 21, 22

Sensors for InCos-D transmitter

Type Function Range Sensor length Main use Connectable to Installation area
InPro-CT - 50 Temperature sensor −40…+ 80 °C 50 mm Room/Duct InCos-D safe area
InPro-CT -100 Temperature sensor −40…+ 125 °C 100 mm Duct InCos-D safe area
InPro-CT -150 Temperature sensor −40…+ 125 °C 150 mm Duct InCos-D safe area
InPro-CT -200 Temperature sensor −40…+ 125 °C 200 mm Duct InCos-D safe area
InPro-CF - 50 Humidity sensor 0…100 %rF 50 mm Room/Duct InCos-D safe area
InPro-CF -100 Humidity sensor 0…100 %rF 100 mm Duct InCos-D safe area
InPro-CF -150 Humidity sensor 0…100 %rF 150 mm Duct InCos-D safe area
InPro-CF -200 Humidity sensor 0…100 %rF 200 mm Duct InCos-D safe area
InPro-CTF- 50 Combination temperature / humidity −40…+ 80 °C, 0…100 %rH 50 mm Room/Duct InCos-D safe area
InPro-CTF-100 Combination temperature / humidity −40…+ 125 °C, 0…100 %rH 100 mm Duct InCos-D safe area
InPro-CTF-150 Combination temperature / humidity −40…+ 125 °C, 0…100 %rH 150 mm Duct InCos-D safe area
InPro-CTF-200 Combination temperature / humidity −40…+ 125 °C, 0…100 %rH 200 mm Duct InCos-D safe area

Accessories
Type Description/Technical data
MFK Mounting flange for duct-installation, for variable depth of immersion in the air duct
TH- VA Probe made of stainless-steel V4A 1.4571, length 150 mm for ..Pro-CT-200. Other lengths on request
Kit-FA-VA Sinter filter cap for humidity sensor (only up to 90 %rH)
MKR-VA/AL Mounting bracket for installation on round air-ducts (diameter up to 600 mm)

www.schischek.com 35
Price list Catalogue
Product 2021

ExLine Ex-transmitter with Ex-i circuit for zone 0, 1, 2, 20, 21, 22

Explosion proof Features EXL-IM-9182-10-51-11s C2305 TMU
EXL-IM-9182-.. EXL-IM-9182-.. Description Basics
Zone 0, 1, 2, 20, 21, 22 Module with intrinsically safe circuit to change a passive • 24 V DC power supply
Gas + Dust sensor signal (e.g. PT100) into an active mA / V signal. • Inverse-polarity protection
certified according to Module must be installed in the safe area, sensor in the • Transmitter for passive, potential free, analog sensors
ATEX, IECEx, CSA, hazardous location ! series ExSens, 2-3-4-wire connection
FM/UL, EAC, INMETRO, • Simple configuration via software or DIP-switches
KOSHA, PESO Delivery: 1 Ex-i module for DIN rail mounting • Input: PT100, PT500, PT1000, Ni100, Ni500, Ni1000,
0…1.000 Ohm
Accessory (optional): analog sensors type ExSens • Output: 4…20 mA, with additional plug 0…10 V
• LED operation indication
• Dimensions (W × H × D) 17,6 × 99 × 114,5 mm
• Rail mounting according DIN, installation in safe area

EXL-IM-9182-10-51-11s C2305 TMU transmitter

Type Description/Technical data Installation module Installation sensor*
EXL-IM-9182-.. 1 module (rail mounting) for 1 passive sensor series ExSens safe area zone 0, 1, 2, 20, 21, 22
Optional:
Plug 0-10V-9182 for output 0…10 V (installation in safe area)
N1 supply unit Input 120…240 VAC, output 24 VDC, max. 0,5 A, max. 4 pcs. EXL-IM… connectable. N1 supply unit is required only in case of 120…240 VAC supply !
*in acc. with certification of sensor !

36 www.schischek.com
Price list Catalogue
Product 2021

ExSens passive analog sensors for zone 1, 2, 21, 22

Explosion proof Features analog ExSens sensors
ExSens passive Description Basics
Zone 1, 2, 21, 22 ExSens sensors for temperature, humidity or pressure • Sensors for installation in hazardous locations,
Gas + Dust measurement in hazardous locations with manufacturer connected to a relevant transmitter, for e.g. EXL-
certified according to certification in acc. with ATEX directives. The sensors IM-9182-…
ATEX are passive and potential free. • The transmitter changes the passive resistance signal
Manufacturer certificate into an acitve 4...20 mA signal (with additional plug
Delivery: 1 Sensor 0…10 V)
Ordering example for 1 room humidity sensor • Sensor is installed in the hazardous location,
Type to purchase: 1 × FFR-2G module in the safe area

Sensors, connectable to transmitter EXL-IM-9182-…

Type Function Measuring range Sensor Connectable to transmitter Sensor in zone
TFR -2G Room temperature −30…+ 60 °C Pt 100 DIN EXL-IM-9182-… 1, 2
TFR -2G3D Room temperature (IP65) −40…+ 60 °C Pt 100 DIN EXL-IM-9182-… 1, 2, 22
TFK -2G3D Duct temperature (IP65), 200 mm −30…+150 °C Pt 100 DIN EXL-IM-9182-… 1, 2, 22
TFK -2G3D-400 Duct temperature, length 400 mm −30…+150 °C Pt 100 DIN EXL-IM-9182-… 1, 2, 22
TFT -2G3D Sensor temperature (IP65), 100 mm −30…+150 °C Pt 100 DIN, tubing G½″ Ms EXL-IM-9182-… 1, 2, 22
TFT-V4A-2G3D Sensor temperature (IP65), 100 mm −30…+150 °C Pt 100 DIN, tubing G½″ VA EXL-IM-9182-… 1, 2, 22
TFM -2G-3 Mean value temperature 3 m −20…+ 70 °C Pt 100 DIN EXL-IM-9182-… 1, 2
TFR-AN -2G3D Room temperature direct contact −30…+110 °C Pt 100 DIN EXL-IM-9182-… 1, 2, 22
FFR -2G Room humidity 30…100 %rF 0…1 kΩ EXL-IM-9182-… 1, 2
FFK -2G Duct humidity 30…100 %rF 0…1 kΩ EXL-IM-9182-… 1, 2
TFFR -2G Room combination temp./humidity 30…100 %rF, -10…+60 °C 0…1 kΩ, Pt 100 2 × EXL-IM-9182-… 1, 2
TFFK -2G Duct combination temp./humidity 30…100 %rF, -20…+60 °C 0…1 kΩ, Pt 100 2 × EXL-IM-9182-… 1, 2
DFK-07 -2G-FP Differential pressure (IP65) ∆P < 700 Pa x…y Ω EXC-5114B2A-RW-MA (Milliamp output), 1, 2
EXC-5114B2A-RW-V (Volt output)
DFK-17 -2G-FP Differential pressure (IP65) ∆P < 1700 Pa x…y Ω EXC-5114B2A-RW-MA (Milliamp output), 1, 2
EXC-5114B2A-RW-V (Volt output)
VFK-07 -2G-FP Volume control (IP65) 0…15 m/s x…y Ω on request 1, 2
SGR -2G Potentiometer Resistance 0…1 kΩ EXL-IM-9182-… 1, 2

www.schischek.com 37
Price list Catalogue
Product 2021

ExBin – Switching sensor series for hazardous locations!

Applications for differential pressure, temperature, humidity, fan belt monitoring and frost protection ...

HAZARDOUS LOCATIONS ZONE 1, 2, 21, 22

NO MODULE IN PANEL NEEDED

NO INTRINSIC SAFE CIRCUITS NEEDED

EASY INSTALLATION

EASY PARAMETERISATION

REDUCED INSTALLATION COST

ACTUAL VALUE INDICATION OFFSHORE/MARINE COATED VERSION

STAINLESS STEEL SOLUTION

38 www.schischek.com
Price list Catalogue
Product 2021

Content overview
Installation areas
Gas Dust Gas Dust Gas Dust
Product series Page 0 20 1 21 2 22 SA*
Switching sensors (thermostats, hygrostats, pressostats, fan belt protection, frost protection)
Overview switching (binary) sensors 38/44
ExBin-P pressure /differential pressure 0… 5.000 Pa 45    
RedBin-P pressure /differential pressure 0… 5.000 Pa 45  
InBin-P pressure /differential pressure 0… 5.000 Pa 45 
ExBin-FR frost protection thermostat −10… +15 °C 42    
RedBin-FR frost protection thermostat −10… +15 °C 42  
InBin-FR frost protection thermostat −10… +15 °C 42 
ExBin-A modules for adaptation of 1-5 passive, potential free, switching ExSens sensors 43    
RedBin-A modules for adaptation of 1-5 passive, potential free, switching ExSens sensors 43  
InBin-A modules for adaptation of 1-5 passive, potential free, switching sensors 43 
ExBin-D temperature and humidity thermostat for ExPro-B… sensors 44    
RedBin-D temperature and humidity thermostat for ExPro-B… sensors 44  
InBin-D temperature and humidity thermostat for InPro-B… sensors 44 
ExPro-B… thermostat /hygrostat sensors for operation in HVAC systems 45    
InPro-B… thermostat /hygrostat sensors for operation in HVAC systems 45 
ExLine switching module EXL-IR-9170-… for passive, potential free, switching ExSens sensors 46 
ExSens switching, passive temperature- / humidity- /pressure sensors 47 () ()  ()  
Special options for sensors
Overview special options for sensors 48
Overview heating system ..Polar for sensors 49
ExPolar / ExArctic heating system for sensors’ use in Ex areas down to −40 /−60 °C 49    
InPolar / InArctic heating system for sensors’ use in safe area down to −40 /−60 °C 49 
*SA = Safe area () = on request

www.schischek.com 39
Price list Catalogue
Product 2021

ExBin-../ RedBin-../ InBin-.. Sensors with switching output (relay) – Overview

Overview of the ExBin-.., RedBin-.. and InBin-.. sensor technology
Installation areas: The binary sensor concept offers especially in Ex-area huge benefits:
ExBin-..........................................Sensors for use in hazardous locations zone 1, 2, 21, 22 1. No intrinsically safe wiring required between the control panel and the sensor
RedBin- .......................................Sensors for use in hazardous locations zone 2, 22 2. No intrinsically safe circuit necessary inside the control panel
InBin-...........................................Sensors for safe area 3. No switching module needed in the electrical control panel
Application areas: 4. Reduced installation cost
Ex/Red/InBin-P.............................. Sensors for pressure and differential pressure monitoring 5. Easy installation
Ex/Red/InBin-FR ........................... Sensors for frost protection monitoring 6. Easy parameterisation
Ex/Red/InBin-D + ..Pro-B............. Sensors (active) for temperature and/or humidity monitoring 7. 1- and 2-stage versions available
Ex/Red/InBin-A + ExSens............ Sensors (passive) for temperature, humidity, pressure monitoring 8. Actual value indication
EXL-IR-9170-.. (Ex-i) + ExSens...... Sensors (passive) for temperature, humidity, pressure, filter 9. Optional in stainless steel (AISI 316) or with offshore/marine coating
and fan monitoring

Pressure, differential pressure (Filter/fan belt monitoring) – active ExBin-P-.., RedBin-P-.., InBin-P-..
Binary pressure /differential pressure auxiliary
ΔP ExBin-P ΔP switch 0…5.000 Pa, for direct connection of air
hoses. IP66 Aluminium die-cast housing with
integrated terminal box. Set points adjust-
able on site, output 1 potential-free make contact.
Integrated indication of actual value, illuminated.
normal wiring 2-stage version optionally available.

Frost protection thermostats – active ExBin-FR-.., RedBin-FR-.., InBin-FR-..

Frost protection thermostat mechanically adjust-
°C ExBin-FR able and switching. Setting range −10…+15 °C.
3 or 6 m capillary as sensor with a resolution of
40 cm effective range. Switching status display
with LED. IP66 Aluminium die-cast housing with
integrated terminal box. Output 1 potential-free
normal wiring make contact.

Thermostats, hygrostats – active ExBin-D, RedBin-D, InBin-D + ExPro-B.. respec-

tively InPro-B.. Sensor
°C ExBin-D Thermostats and /or hygrostats for connection of
Duct sensor
%rH + ExPro-B.. one ExPro-B.. respectively InPro-B.. sensor. Op-
erating range adjustable. Indication of actual value.
IP66 Aluminium die-cast housing with integrated
terminal box. Output 1 potential-free make contact.
normal wiring Room sensor 2-stage version optionally available.

1- or 2-channel switching module for passive sensors ExBin-A1/ A2, RedBin-A1/A2 + ExSens
switching sensors
°C ExBin-A 1- or 2-channel Ex-switching module for connection
%rH + ExSens of max. 2 passive, potential-free switching sensors.
Switching status display with LED. IP66 Aluminium
ΔP Ex-i wiring
(intrinsically safe)
die-cast housing with integrated terminal box. Output
depending on type 1-2 make contacts with collective
normal wiring supply unit.

Temperature, humidity, diff. pressure switching module for passive sensors EXL-IR-.. switching module + ExSens sensor
Ex-switching module for connection of one pas-
°C EXL-IR-.. sive, switching ExSens sensor, such as differential
%rH + ExSens pressure switch, frost protection thermostat or hy-
grostat through intrinsically safe electrical conduit.
ΔP Ex-i wiring Installation in control box onto DIN-rail. Output is
(intrinsically safe) potential-free.
normal wiring

Safe area Ex area

40 www.schischek.com
Price list Catalogue
Product 2021

ExBin-P/ RedBin-P/ InBin-P Pressure /differential pressure switch, binary

Explosion proof Industrial Features of ExBin-P-.., RedBin-P-.., InBin-P-..
ExBin-P-.. RedBin-P-.. InBin-P-.. Description Basics
Zone 1, 2, 21, 22 Zone 2, 22 NOT Explosion proof ExBin-P-.., RedBin-P-.. and InBin-P-.. are • No additional module in the panel required !
Gas + Dust Gas + Dust and only for pressure switches for HVAC systems, e.g. • No intrinsically safe wiring required !
certified according to certified according to use in safe area for differential pressure control for filter- or • 24 VAC/ DC supply
ATEX, IECEx, ATEX, IECEx, IP66 fan belt monitoring. • 1-channel: 1 potential-free contact
EAC, KOSHA EAC, CSA ..Bin-P-100 pressure switch allows an • 2-channel (optional): 2 potential-free
achievement of new applications with a contacts
smaller differential pressure range. • Switch-point is digitally adjustable
Additionally the ..Bin-P-100 has an adjust- • Indication of actual value (can be switched off)
able switch activation delay contact for • Switching status display over LED
applications which require a time-delayed • All parameters can be adjusted on site
fault indication, for example short opening without additional tools and measurement
of doors in clean room environment. devices
Delivery: • Aluminium housing IP66
1 Pressure switch with integrated • Integrated terminal box (ExBin.. with “Ex-e”)
terminal box, 3 tapping screws • ..Bin-P-100 with switch activation delay,
adjustable from 0…240 s
• Dimensions (H × W × D) 180 × 107 × 66 mm

ExBin-P-.. Differential pressure switch for zone 1, 2, 21, 22

Type Measurement range Safe overload Setting range Special feature Installation module
ExBin-P- 100 0… 100 Pa up to 5.000 Pa 1-stage adjustable switch-point in meas. range adjustable switch activation delay 0…240 s zone 1, 2, 21, 22
ExBin-P- 500 0… 500 Pa up to 5.000 Pa 1-stage adjustable switch-point in meas. range zone 1, 2, 21, 22
ExBin-P- 500-2 0… 500 Pa up to 5.000 Pa 2-stage adjustable switch-point in meas. range zone 1, 2, 21, 22
ExBin-P-5000 0…5.000 Pa up to 50.000 Pa 1-stage adjustable switch-point in meas. range zone 1, 2, 21, 22
ExBin-P-5000-2 0…5.000 Pa up to 50.000 Pa 2-stage adjustable switch-point in meas. range zone 1, 2, 21, 22

RedBin-P-.. Differential pressure switch for zone 2, 22

Type Measurement range Safe overload Setting range Special feature Installation module
RedBin-P- 100 0… 100 Pa up to 5.000 Pa 1-stage adjustable switch-point in meas. range adjustable switch activation delay 0…240 s zone 2, 22
RedBin-P- 500 0… 500 Pa up to 5.000 Pa 1-stage adjustable switch-point in meas. range zone 2, 22
RedBin-P- 500-2 0… 500 Pa up to 5.000 Pa 2-stage adjustable switch-point in meas. range zone 2, 22
RedBin-P-5000 0…5.000 Pa up to 50.000 Pa 1-stage adjustable switch-point in meas. range zone 2, 22
RedBin-P-5000-2 0…5.000 Pa up to 50.000 Pa 2-stage adjustable switch-point in meas. range zone 2, 22

InBin-P-.. Differential pressure switch for safe area

Type Measurement range Safe overload Setting range Special feature Installation module
InBin-P- 100 0… 100 Pa up to 5.000 Pa 1-stage adjustable switch-point in meas. range adjustable switch activation delay 0…240 s safe area
InBin-P- 500 0… 500 Pa up to 5.000 Pa 1-stage adjustable switch-point in meas. range safe area
InBin-P- 500-2 0… 500 Pa up to 5.000 Pa 2-stage adjustable switch-point in meas. range safe area
InBin-P-5000 0…5.000 Pa up to 50.000 Pa 1-stage adjustable switch-point in meas. range safe area
InBin-P-5000-2 0…5.000 Pa up to 50.000 Pa 2-stage adjustable switch-point in meas. range safe area

Accessories
Type Description/Technical data
Kit 2 Includes 2 meter pressure hose (inner diameter 6 mm) and 2 plastic fittings
MKR-VA/AL Mounting bracket for installation on round air-ducts (diameter up to 600 mm)
Special options and offshore kits see page 48

Pressure, differential pressure (Filter/Fan belt monitoring) – switching

ΔP

normal wiring

Safe area Ex area

www.schischek.com 41
Price list Catalogue
Product 2021

ExBin-FR/ RedBin-FR/ InBin-FR Frost protection thermostats

Explosion proof Industrial Features ExBin-FR-.., RedBin-FR-.., InBin-FR-..
ExBin-FR-.. RedBin-FR-.. InBin-FR-.. Description Basics
Zone 1, 2, 21, 22 Zone 2, 22 NOT Explosion proof ExBin-FR-.., RedBin-FR-.. and InBin-FR-.. • No additional module in the panel required !
Gas + Dust Gas + Dust and only for are frost protection thermostats for HVAC • No intrinsically safe wiring required !
certified according to certified according to use in safe area systems, e.g. for frost protection monitoring • 24 VAC/DC supply
ATEX, IECEx, ATEX, IECEx, IP66 of heating register s / heat exchangers. • Temperature sensoring by capillary with
EAC EAC, CSA 3 m or 6 m length (depending on type)
Delivery: • Min. reaction length of capillary ~ 40 cm
1 Frost protection thermostat with integra- • 1 potential-free contact
ted terminal box, with 3 m or 6 m capillary • Switch-point is adjustable mechanically
(depending on type), 3 tapping screws • Switching status display with LED
• Aluminium housing IP66
Recommended accessory: • Integrated terminal box (ExBin.. with “Ex-e”)
for ..Bin-FR-3: Kit 1.3 • Dimensions (H × W × D) 180 × 107 × 66 mm
for ..Bin-FR-6: Kit 1.6

ExBin-FR-.. frost protection thermostats for zone 1, 2, 21, 22

Type Capillary Temperature range Setting range Installation module
ExBin-FR-3 3m −10 ... +15 °C 1-stage adjustable switch-point in temperature range zone 1, 2, 21, 22
ExBin-FR-6 6m −10 ... +15 °C 1-stage adjustable switch-point in temperature range zone 1, 2, 21, 22

RedBin-FR-.. frost protection thermostats for zone 2, 22

Type Capillary Temperature range Setting range Installation module
RedBin-FR-3 3m −10 ... +15 °C 1-stage adjustable switch-point in temperature range zone 2, 22
RedBin-FR-6 6m −10 ... +15 °C 1-stage adjustable switch-point in temperature range zone 2, 22

InBin-FR-.. frost protection thermostats for safe area

Type Capillary Temperature range Setting range Installation module
InBin-FR-3 3m −10 ... +15 °C 1-stage adjustable switch-point in temperature range safe area
InBin-FR-6 6m −10 ... +15 °C 1-stage adjustable switch-point in temperature range safe area

Accessories
Type Description/Technical data
Kit 1.3 Capillary duct, assembly cramp and 4 assembly brackets for frost protection thermostat ..Bin-FR-3
Kit 1.6 Capillary duct, assembly cramp and 8 assembly brackets for frost protection thermostat ..Bin-FR-6
MKR-VA/AL Mounting bracket for installation on round air-ducts (diameter up to 600 mm)
Special options and offshore kits see page 48

Frost protection thermostat – switching

normal wiring

Safe area Ex area

42 www.schischek.com
Price list Catalogue
Product 2021

ExBin-A/ RedBin-A/ InBin-A Switching modules

Explosion proof Industrial Features of ExBin-A-.., RedBin-A-.., InBin-A-..
ExBin-A-.. RedBin-A-.. InBin-A-.. Description Basics
Zone 1, 2, 21, 22 Zone 2, 22 NOT Explosion proof ExBin-A-.., RedBin-A-.. and InBin-A-.. • No additional module in the panel required !
Gas + Dust Gas + Dust and only for modules are switching modules for direct • No intrinsically safe wiring required !
certified according to certified according to use in safe area mounting in Ex areas (except InBin-A) with • Mounting of module directly in Ex area
ATEX, IECEx, ATEX, IECEx, IP66 1 or 2 channels, for connection of 1 or 2 • 24 VAC/DC supply
EAC EAC, CSA passive, potential-free, switching sensors, • Sockets for 1 or 2 passive, potential-free,
for use in HVAC systems. switching sensors
Delivery: 1 module with sockets for 1 or 2 • 1 or 2 contacts with common supply unit
ExSens sensors (dependent on type), • 1 or 2 contacts with additional clamp for
3 tapping screws time switch relais, e.g. for 2 fan belt moni-
toring applications (time 120 sec.)
Accessory (optional): Binary sensors • Switching status display with LED
series ExSens, see next page • Aluminium housing IP66
• Integrated terminal box (ExBin.. with “Ex-e”)
• Dimensions (H × W × D) 180 × 107 × 66 mm

ExBin-A-.. Switching modules for 1 or 2 passive switching sensors for zone 1, 2, 21, 22
Type Description/Technical data Installation module Installation sensor*
ExBin-A-1 Module (1 channel) to connect 1 switching ExSens sensor in Ex area zone 1, 2, 21, 22 zone 0, 1, 2, 20, 21, 22
ExBin-A-2 Module (2 channel) to connect 2 switching ExSens sensors in Ex area zone 1, 2, 21, 22 zone 0, 1, 2, 20, 21, 22
*in acc. with certification of sensor !

RedBin-A-.. Switching modules for 1 or 2 passive switching sensors for zone 2, 22

Type Description/Technical data Installation module Installation sensor*
RedBin-A-1 Module (1 channel) to connect 1 switching ExSens sensor in Ex area zone 2, 22 zone 0, 1, 2, 20, 21, 22
RedBin-A-2 Module (2 channel) to connect 2 switching ExSens sensors in Ex area zone 2, 22 zone 0, 1, 2, 20, 21, 22
*in acc. with certification of sensor !

InBin-A-.. Switching modules for 1 or 2 passive switching sensors for safe area
Type Description/Technical data Installation module Installation sensor
InBin-A-1 Module (1 channel) to connect 1 switching sensor safe area safe area
InBin-A-2 Module (2 channel) to connect 2 switching sensors safe area safe area

Accessories
Type Description/Technical data
MKR-VA/AL Mounting bracket for installation on round air-ducts (diameter up to 600 mm)
Special options and offshore kits see page 48

1- or 2-channel switching module for passive switching sensors

Ex-i wiring
(intrinsically safe)

normal wiring

Safe area Ex area

www.schischek.com 43
Price list Catalogue
Product 2021

ExBin-D/ RedBin-D/ InBin-D Thermostats, hygrostats

Explosion proof Industrial Features of ExBin-D-.., RedBin-D-.., InBin-D-..
ExBin-D-.. RedBin-D-.. InBin-D-.. Description Basics
Zone 1, 2, 21, 22 Zone 2, 22 NOT Explosion proof ExBin-D-.., RedBin-D-.. and InBin-D-.. • No additional module in the panel required !
Gas + Dust Gas + Dust and only for modules are used together with ExPro- • No intrinsically safe wiring required !
certified according to certified according to use in safe area B../ InPro-B.. sensors as thermostats or • 24 VAC/DC supply
ATEX, IECEx, ATEX, IECEx, IP66 hygrostats in HVAC systems. • Socket for ExPro-B.. sensor
EAC EAC, CSA • Selectable on site if used for room or duct
Delivery: 1 Ex / Red/ InBin.. module with application
socket for 1 ExPro -B../ InPro-B.. sensor, • Switch-point for °C and %rH separately ad-
3 tapping screws justable (dependend on sensor type)
Required accessory (additional price): • 1-channel: 2 pot.-free contacts (1×°C, 1×%rH)
ExPro-B.. or InPro-B.. sensor • 2-channel: 4 pot.-free contacts (2×°C, 2×%rH)
• Display with indication of actual value
Ordering example for one thermostat in an • Switching status display with LED
air duct, 150 mm sensor length, with sensor • Aluminium housing IP66
in Ex zone 21. • Integrated terminal box (ExBin.. with “Ex-e”)
Types to order: • Dimensions (H × W × D) 180 × 107 × 66 mm
1 × ExBin-D-..
1 × ExPro-BT150 (Ex-i sensor)

ExBin-D-.. thermostats and/or hygrostats, dependend on sensor type ExPro-B.. for zone 1, 2, 21, 22
Type Description/Technical data Installation module Installation ExPro-B.. sensor
ExBin-D Module for connection of one ExPro-B.. sensor as thermostat and /or hygrostat, 1-stage zone 1, 2, 21, 22 zone 1, 2, 21, 22
ExBin-D-2 Module for connection of one ExPro-B.. sensor as thermostat and /or hygrostat, 2-stage zone 1, 2, 21, 22 zone 1, 2, 21, 22

RedBin-D-.. thermostats and/or hygrostats, dependend on sensor type ExPro-B.. for zone 2, 22
Type Description/Technical data Installation module Installation ExPro-B.. sensor
RedBin-D Module for connection of one ExPro-B.. sensor as thermostat and /or hygrostat, 1-stage zone 2, 22 zone 1, 2, 21, 22
RedBin-D-2 Module for connection of one ExPro-B.. sensor as thermostat and /or hygrostat, 2-stage zone 2, 22 zone 1, 2, 21, 22

InBin-D-.. thermostats and/or hygrostats, dependend on sensor type InPro-B.. for safe area
Type Description/Technical data Installation module Installation InPro-B.. sensor
InBin-D Module for connection of one InPro-B.. sensor as thermostat and /or hygrostat, 1-stage safe area safe area
InBin-D-2 Module for connection of one InPro-B.. sensor as thermostat and /or hygrostat, 2-stage safe area safe area

Accessories
Type Description/Technical data
MKR-VA/AL Mounting bracket for installation on round air-ducts (diameter up to 600 mm)
Special options and offshore kits see page 48

Example of combinations

44 www.schischek.com
Price list Catalogue
Product 2021

ExPro-B…/ InPro-B… Thermostat / hygrostat sensors

Explosion proof Industrial Features of ExPro-B.., InPro-B..
ExPro-B.. InPro-B.. Description Basics
Zone 1, 2, 21, 22 Only for use with ExPro-B.. sensors are used for measurements of • Sensors for connection to ExBin-D-.., RedBin-D-..,
Gas + Dust InBin-D.. transmitter! temperature and / or humidity in hazardous locations, for InBin-D-.. modules. Adaption via connector
EC type-approved NOT for use in exclusive use with ExBin-D-.. / RedBin-D-.. modules ! • ExPro-B../ InPro-B.. sensors can be optionally
with ExBin-D/RedBin-D Ex area! screwed to the housing at the back (duct measurement)
modules InPro-B.. sensors are suitable for temperature and / or or bottom (room measurement)
humidity measurement in safe areas, for exclusive use • When using humidity-sensors, the contamination and
with InBin-D-.. modules ! aggressiveness of the medium has to be regarded

Delivery: 1 sensor with connector

Example: room-humidity sensor, 50 mm length

Type: 1 × ExPro-BF-50
Attention: only in combination with:
1 × ExBin-D-.. or RedBin-D-..
(InBin-D-.. with InPro-B.. sensors)

Sensors for ExBin-D-.. and RedBin-D-.. modules

Type Function Measurement range Sensor length Main use Connectable to Installation area
ExPro-BT - 50 Thermostat −40…+ 80 °C 50 mm Room/Duct ExBin-D RedBin-D zone 1, 2, 21, 22
ExPro-BT -100 Thermostat −40…+ 125 °C 100 mm Duct ExBin-D RedBin-D zone 1, 2, 21, 22
ExPro-BT -150 Thermostat −40…+ 125 °C 150 mm Duct ExBin-D RedBin-D zone 1, 2, 21, 22
ExPro-BT -200 Thermostat −40…+ 125 °C 200 mm Duct ExBin-D RedBin-D zone 1, 2, 21, 22
ExPro-BF - 50 Hygrostat 0…100 %rH 50 mm Room/Duct ExBin-D RedBin-D zone 1, 2, 21, 22
ExPro-BF -100 Hygrostat 0…100 %rH 100 mm Duct ExBin-D RedBin-D zone 1, 2, 21, 22
ExPro-BF -150 Hygrostat 0…100 %rH 150 mm Duct ExBin-D RedBin-D zone 1, 2, 21, 22
ExPro-BF -200 Hygrostat 0…100 %rH 200 mm Duct ExBin-D RedBin-D zone 1, 2, 21, 22
ExPro-BTF- 50 Combination Thermostat / Hygrostat −40…+ 80 °C, 0…100 %rH 50 mm Room/Duct ExBin-D RedBin-D zone 1, 2, 21, 22
ExPro-BTF-100 Combination Thermostat / Hygrostat −40…+ 125 °C, 0…100 %rH 100 mm Duct ExBin-D RedBin-D zone 1, 2, 21, 22
ExPro-BTF-150 Combination Thermostat / Hygrostat −40…+ 125 °C, 0…100 %rH 150 mm Duct ExBin-D RedBin-D zone 1, 2, 21, 22
ExPro-BTF-200 Combination Thermostat / Hygrostat −40…+ 125 °C, 0…100 %rH 200 mm Duct ExBin-D RedBin-D zone 1, 2, 21, 22

Sensors for InBin-D-.. modules

Type Function Measurement range Sensor length Main use Connectable to Installation area
InPro-BT - 50 Thermostat −40…+ 80 °C 50 mm Room/Duct InBin-D safe area
InPro-BT -100 Thermostat −40…+ 125 °C 100 mm Duct InBin-D safe area
InPro-BT -150 Thermostat −40…+ 125 °C 150 mm Duct InBin-D safe area
InPro-BT -200 Thermostat −40…+ 125 °C 200 mm Duct InBin-D safe area
InPro-BF - 50 Hygrostat 0…100 %rH 50 mm Room/Duct InBin-D safe area
InPro-BF -100 Hygrostat 0…100 %rH 100 mm Duct InBin-D safe area
InPro-BF -150 Hygrostat 0…100 %rH 150 mm Duct InBin-D safe area
InPro-BF -200 Hygrostat 0…100 %rH 200 mm Duct InBin-D safe area
InPro-BTF- 50 Combination Thermostat /Hygrostat −40…+ 80 °C, 0…100 %rH 50 mm Room/Duct InBin-D safe area
InPro-BTF-100 Combination Thermostat /Hygrostat −40…+ 125 °C, 0…100 %rH 100 mm Duct InBin-D safe area
InPro-BTF-150 Combination Thermostat /Hygrostat −40…+ 125 °C, 0…100 %rH 150 mm Duct InBin-D safe area
InPro-BTF-200 Combination Thermostat /Hygrostat −40…+ 125 °C, 0…100 %rH 200 mm Duct InBin-D safe area

Accessories
Type Description/Technical data
MFK Mounting flange for duct-installation, for variable depth of immersion in the air duct
TH- VA Probe made of stainless-steel V4A 1.4571, length 150 mm for ..Pro-BT-200. Other lengths on request
Kit-FA-VA Sinter filter cap for humidity sensor (only up to 90 %rH)
MKR-VA/AL Mounting bracket for installation on round air-ducts (diameter up to 600 mm)

www.schischek.com 45
Price list Catalogue
Product 2021

ExLine Ex-switching module for potential free, binary signals in zone 0, 1, 2, 20, 21, 22
Explosion proof Features EXL-IR-9170-11-12-11s C2304 SV
EXL-IR-9170-.. EXL-IR-9170-.. Description Basics
Zone 0, 1, 2, 20, 21, 22 Module with intrinsically safe circuit to change a passive • 24 V DC supply
Gas + Dust potential free binary signal (e.g. contact) into a contact in • Inverse-polarity protection
certified according to the safe area. • Input: passive potential free binary sensor
ATEX, IECEx, CSA, Module must be installed in the safe area, sensor in the • Output: potential free contact in the safe area
FM/UL, EAC, INMETRO, hazardous location ! • LED operation indication
KOSHA • Applicable up to SIL 2
Delivery: 1 Ex-i module for DIN rail mounting • Dimensions (W × H × D) 17,6 × 99 × 114,5 mm
• Rail mounting according DIN
Accessory (optional): binary sensors type ExSens • Installation in safe area

EXL-IR-9170-11-12-11s C2304 SV switching module

Type Description/Technical data Installation module Installation sensor*
EXL-IR-9170-.. 1 module (rail mounting) for 1 passive binary sensor series ExSens safe area zone 0, 1, 2, 20, 21, 22
Optional:
N1 supply unit Input 120…240 VAC, output 24 VDC, max. 0,5 A, max. 4 pcs. EXL-IR-.. connectable. N1 supply unit is required only in case of 120…240 VAC supply !
*in acc. with certification of sensor !

46 www.schischek.com
Price list Catalogue
Product 2021

ExSens passive, switching sensors for zone 1, 2, 22

Explosion proof Features ExSens
ExSens passive, switching Description Basics
Zone 1, 2, 22 ExSens switching sensors for temperature, humidity • Sensors for installation in hazardous locations,
Gas + Dust or pressure measurement in hazardous locations with connected to a switching module type ExBin-A-..,
certified according to manufacturer certification in acc. with ATEX. The sensors RedBin-A-.. or EXL-IR-9170-..
ATEX are passive and potential free. • The module changes the passive binary signal into
Manufacturer certificate a contact in safe area
Delivery: 1 Sensor • Standard sensor design with integrated scale and
Ordering example for 1 frost protection thermostat adjustment
Type to purchase: 1 × TBK-FR-2G • Sensor is installed in the hazardous location,
module in the safe area

Sensors, connectable to switching modules type ExBin-A-.., RedBin-A-.., EXL-IR-9170-..

Type Function Range Sensor Information Connectable to module type Sensor in zone
TBR -2G Room thermostat 0…+40 °C, 1 K Contact, 2-pos ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2
TBR -2G3D Room thermostat (IP65) −35…+30 °C, 2-20 K Contact, 2-pos ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2, 22
TBR-2 -2G Room thermostat 2 stage 0…+60 °C, 1 K 2 × Contact, 2-pos 2 × ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2
TBR-AN-2G Room temperature direct contact 0…+60 °C, 5 ± 1 K (fix) Contact, 2-pos ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2
TBK -2G Duct thermostat (IP65) 0…+65 °C, 2-20 K Contact, 2-pos ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2
TBT -2G Sensor thermostat (IP54) 0…+90 °C, 3 K Contact, 2-pos L = 120 mm ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2
TBT-VA -2G Sensor thermostat with VA sleeve 0…+90 °C, 3 K Contact, 2-pos V4A ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2
TBK-FR-2G Frost protection thermostat (IP65) −10…+12 °C Contact, 2-pos capillary 6 m ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2
FBR -2G Room hygrostat 35…100 %rH, ~ 4 %rH Contact, 2-pos ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2
FBK -2G Duct hygrostat 35…100 %rH, ~ 4 %rH Contact, 2-pos L = 180 mm ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2
DBK -2G Differential pressure 20-300, 50-500, 100-1.000 Pa Contact, 2-pos ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2
DBK -2G3D Differential pressure (IP65) 40-125, 100-400, 350-1.400 Pa Contact, 2-pos ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2, 22
LGW-2G-…-SIL Differential pressure 0,04-0,3 /0,1-1 /0,25-5 /3-15 kPa Contact, single SIL EXL-IR-.. 1, 2
WFBK -2G Air paddle 2…8 m/s, paddle V2A Contact, 2-pos ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2
SWBT -2G liquid flow switch −20…+60 °C Contact, 2-pos ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2
NBW-K -2G Fan belt protection (IP65) up to < 20.000 m³/h Namur sensor + bracket ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2
NBW-G -2G Fan belt protection (IP65) more than > 20.000 m³/h Namur sensor + bracket ExBin-A-.., RedBin-A-.., EXL-IR-.. 1, 2

Accessories
Type Description/Technical data
Installation-Kit-1 for frost protection sensor type TBK-FR-2G, PG entries for capillary, 6 brackets, support bracket
Install-Kit-2-DBK includes 2 meter pressure hose (inner diameter Ø 6 mm) 2 plastic fittings

www.schischek.com 47
Price list Catalogue
Product 2021

..VA/..CT Special options for sensors – overview

Overview of special options of Schischek sensors for use under extreme weather conditions
Application area: Advantages:
Usage in hazardous locations under extreme weather conditions and / or for • Resistant against corrosive and / or maritime atmosphere
offshore /onshore applications. • Usage under extreme weather conditions
• Approved for offshore- / onshore applications
• Robust and thereby extended period of application time of sensors

Special options sensors Sensors

VA Cos/Bin/Reg Housing material in stainless steel (VA) or alu-

minium housing with offshore/marine coating (CT)
OVA for use under extreme weather conditions. OVA and
CT OCT version for offshore applications.

OCT
normal wiring VA/OVA CT/OCT

Safe area Ex area

..Cos/ ..Bin/ ..Reg Special options for sensors

Explosion proof Features ..Cos /..Bin / ..Reg-…-VA/ OVA/ CT/ OCT
Cos/Bin/Reg-…-..VA/..CT Special options Description Basics
available VA version with housing material in stainless steel similar VA:
for all sensors AISI 316, some parts nickel plated. • Housing material in stainless steel similar AISI 316,
In accordance with type OVA version also with stainless steel housing but suit- some parts nickel plated, resistant against corrosive/
maritime atmosphere, screws in stainless steel
for use in able especially for offshore applications.
Ex area or safe area CT version with aluminium housing and offshore/marine OVA:
• Basics like VA, but offered as offshore version with
coating­, resistant against corrosive and maritime atmos- additionally tubes for clamping ring Ø 6 mm in stainless
phere, some parts nickel plated. steel
OCT version with painted housing like CT, CT:
but suitable especially for offshore applications. • offshore/marine coated aluminium housing, resistant
against corrosive/maritime atmosphere
Delivery: 1 sensor with special option • Cable glands brass nickel plated, screws in stainless steel
OCT:
Ordering example: ExCos-P-250-CT • Basics like CT, but offered as offshore version with M20
cable glands and additionally with tubes for clamping
ring Ø 6 mm in stainless steel
For general basics see description of Cos/Bin/Reg.

..Cos/ ..Bin/..Reg-.. options

Type Description/ Technical data
Cos/Bin/Reg-..- VA Housing material in stainless steel similar AISI 316, some parts nickel plated, screws in stainless steel (surcharge)
Cos-P/Bin-P/Reg-V..-OVA Offshore version with seawater resistant stainless steel housing. M20 cable glands Ni-plated, pressure connection tubes and screws in stainless steel (surcharge)
Cos/Bin/Reg-..- CT Offshore/marine coated aluminium housing, resistant against corrosive and/or maritime atmosphere. Cable glands Ni-plated, screws in stainless steel (surcharge)
Cos-P/Bin-P/Reg-V..-OCT Offshore version with seawater resistant offshore/marine coated Al-housing. M20 cable glands Ni-plated, pressure connection tubes and screws in stainless steel (surcharge)
Kit-S8- CBR Cable glands 2 × M16 × 1,5 mm Ex-e (for cables Ø 5-10 mm) in brass nickel plated for replace the plastic cable glands of ..Cos /..Bin /..Reg sensors
Kit-Offs-GL-CBR Cable glands 2 × M20 × 1,5 mm Ex-d in brass nickel plated for armoured cables suitable for ..Cos / ..Bin /..Reg sensors
Kit-PTC- CBR Pressure tube connection in stainless steel 316 L for 6 mm clamp fittings

48 www.schischek.com
Price list Catalogue
Product 2021

ExPolar Heating system – overview

Overview of new heating system for use with Schischek sensors down to −40 °C
Application area: Advantages:
Usage in hazardous locations for temperatures down to −40 °C. • Especially for usage under high sub-zero temperatures (down to −40 °C)
• Usage directly in hazardous locations
• Adaptable on all Schischek sensors

Heating system for sensors ExPolar-..-CBR

°C ExPolar-..-CBR Adaptable on Schischek sensors type ExCos-..,

ExBin-.., ExReg-...

normal wiring

Safe area Ex area

ExPolar/ InPolar Heating system for ..Cos-.. / Bin-../Reg-.. sensors

Explosion proof Industrial Features ..Polar-…-CBR
ExPolar-…-CBR InPolar-…-CBR Description Basics
Zone 1, 2, 21, 22 NOT explosion proof Controlled heating system for use in sub- • 24/48 VAC/DC, 120/240 VAC
Gas + Dust and only for zero regions down to −40 °C. • 60 W
certified according to use in safe area
ATEX, IECEx, EAC IP66 Adaptable on Schischek sensors ..Cos-.., • −40 °C… +60 °C
..Bin-.. or ..Reg-... • ExPolar for zone 1, 2, 21, 22
Delivery: 1 heating system • InPolar for safe area
(adaptable)
Ordering example: ExPolar-240-CBR

ExPolar-…-CBR/InPolar-…-CBR
Type Adaptable on Operation temperature Supply Power* Installation area
ExPolar-…-CBR ExCos-../ ExBin-.. /ExReg-.. −40 °C up to +60 °C 24 VAC/DC 48 VAC/DC 120 VAC 240 VAC 60 W zone 1, 2, 21, 22
InPolar- …-CBR InCos-.. /InBin-.. /InReg-.. −40 °C up to +60 °C 24 VAC/DC 48 VAC/DC 120 VAC 240 VAC 60 W safe area
Supply voltage *Nominal value
Not suitable for VA versions !

Special option
Type Description/ Technical data
…Polar-…-…-CT Housing offshore / marine coated, resistant against corrosive /maritime atmosphere, some parts nickel plated (surcharge)

ExArctic/ InArctic Heating system for ..Cos-.. / Bin-../Reg-.. sensors

Explosion proof Industrial Features ..Arctic-..
ExArctic-CBR InArctic-CBR Description Basics
Hazardous Location Safe Area Controlled heating system with protective • −60 °C
housing for use down to −60 °C. • ExArctic for hazardous locations
Suitable for Schischek sensors ..Cos-.., ..Bin- • InArctic for safe area
.. or ..Reg-... • details and prices on request
• subject to change
Delivery: 1 heating system
1 protective housing
1 mounting material set
Schematic visualisation Schematic visualisation

www.schischek.com 49
Price list Catalogue
Product 2021

ExMag Electric door holder magnets according ATEX for zone 1, 2, 21, 22
Explosion proof Features ExMag (EXM)
ExMag Magnet Description Basics
Zone 1, 2, 21, 22 ExMag door holder magnets are electric magnets • Electric magnets, silicone free
Gas + Dust to keep doors open or closed as long as supply voltage • Force in acc. with type
certified according to is available. • 24 VDC power supply
ATEX, IECEx • 1 m cable, silicone and halogen free
DNV-GL Delivery: 1 magnet • Ex-e terminal box is required for electrical connection
Ordering example: 650 N magnet + anchor • The max. AC-ripple must not exceed 20%
+ Ex-terminal box
Type to purchase: 1 × EXM-650 + 1 GH 6
+ 1 × EXC-K4/S

Ex-m ExMag magnets

Type Force Supply Function Current Installation in
EXM- 650 650 N 24 VDC Magnet 44 mA Zone 1, 2, 21, 22
EXM-1300 1.300 N 24 VDC Magnet 65 mA Zone 1, 2, 21, 22
EXM-2000 2.000 N 24 VDC Magnet 160 mA Zone 1, 2, 21, 22

Accessories
Type Description/Technical data
GH-6 Anchor for EXM-650
GH-13/20 Anchor for EXM-1300 and EXM-2000
ExBox-3P Ex-e terminal box, IP66
EXC-K4/S Ex-e terminal box, IP66, with integrated fuse
EXC-T1 Ex-d push button
N1 supply unit Input 120…240 VAC, output 24 VDC, max. 0,5 A

ExComp different Ex-components

Explosion proof Features ExComp (EXC…)
ExComp Components Description Basics
Zone 1, 2, 21, 22 Different explosion proof products like switches, safety • No specific information
(in acc. to type) temperature sensors, .... • Data in acc. with every single product / type
Gas + Dust
certified according to
ATEX Delivery: 1 component
Ordering example: Switch 20 A, 6 pole
Type to purchase: 1 × EXC-R 20/6

ExComp components
Type Application Explosion proof Technical data
EXC-R 10/3... Switch II2G EEx ed IIC T6 10 A - 240/ 400 V - 2,5 /4,6 KW - 3 pole
EXC-R 20/3... Switch II2G EEx ed IIC T6 20 A - 240/ 400 V - 4,5 /9,0 KW - 3 pole
EXC-R 20/6... Switch II2G EEx ed IIC T6 20 A - 240/ 400 V - 4,5 /9,0 KW - 6 pole
EXC-R 40/3... Switch II2G EEx ed IIC T6 40 A - 240/ 400 V - 11 /20 KW - 3 pole
EXC-R 40/6... Switch II2G EEx ed IIC T6 40 A - 240/ 400 V - 11 /20 KW - 6 pole
EXC-DS1/VA Safety temperature sensor II2G EEx d IIC T6 Duct mounting, potential free contact, switching at 70°C…160°C (10°C steps)

50 www.schischek.com
Price list Catalogue
Product 2021

Content overview
Additional information Page
Product codes / definitions 52-53
Installation according to ATEX (Zone system) 54
Installation according to NEC 500 (Division system, North America) 55
Valve automation 56-57
Certification information 58-59
Information about ATEX directives 60
Labelling of explosion proof equipment according to ATEX 61
Explosion proof information 62
Information about zones, explosion groups and temperature classes 63
Ex applications 64-67
Rotork products (extraction) and service 68-73
Damper actuation focused 74-75

www.schischek.com 51
Product Catalogue

Product codes / definitions

Description ..Max quarter turn actuators
Ex Max - 5.10 - SF
S = integrated auxiliary switches, switching at 5° and 85°
F = spring return (german word for spring is “Feder”)
Y = modulating actuator 0…10 VDC or 4…20 mA and feedback signal
BF = fire damper actuator, intrinsically safe input for direct ExPro-TT connection (fire trigger)
F1 / F3 = actuator with fast spring return (number after letter F shows closing time in seconds,
e.g. in ~ 1 or 3 seconds)
C = actuator for direct communication with Ex/InReg controller

The numbers show the torque in Nm

Two numbers mean that the torque is selectable on site (e.g. 5 or 10 Nm)

Max is a rotary (quarter turn) actuator for dampers or rotary valves, such as ball or butterfly valves

Ex is for use in zone 1, 2 , 21, 22

Red is for use in zone 2, 22
In is for use in non classified industrial areas

Description ..Run valve actuators

Red Run - 5.10 - Y
Y = modulating actuator 0…10 VDC or 4…20 mA and feedback signal
U = floating control on/off, 3 pos. actuator with 0…10 VDC or 4…20 mA feedback signal

The numbers show the force in N

Two numbers mean that the force is selectable on site (e.g. 500 or 1000 N)

Run is a linear actuator for globe style control valves with a stroke between 5 and 60 mm

Ex is for use in zone 1, 2 , 21, 22

Red is for use in zone 2, 22
In is for use in non classified industrial areas

Description ..Cos analog transmitter

In Cos - P - 2500
The number shows the measuring range of the differential pressure sensor in ± Pa

P = differential pressure sensor

D = module for temperature/ humidity for connection of ExPro-C.. sensors

Cos analog transmitter with output 0…10 V or 4…20 mA

Ex is for use in zone 1, 2 , 21, 22

Red is for use in zone 2, 22
In is for use in non classified industrial areas

52
Product Catalogue

Product codes / definitions

Description ..Bin binary sensors
Ex Bin - P - 500 - 2
The number stands for a 2-stage adjustable switch-point in measurement range
Without number the sensor comes with 1-stage, adjustable switch-point in measurement range

The number shows the max. adjustment range of the differential pressure switch in Pa

P = differential pressure switch

D = thermostat-/ hygrostat modul for connection of ExPro-B.. sensors
FR = frost protection thermostat
A1 = switching module for connection of one passive switch
A2 = switching module for connection of two passive switches

Bin switching measuring module with output as a potential free contact (1 opener or 1 closer)

Ex is for use in zone 1, 2 , 21, 22

Red is for use in zone 2, 22
In is for use in non classified industrial areas

Description ..Pro-.. sensors for ..Cos-D or ..Bin-D modules

Ex Pro - CTF - 200
The number shows the length of the sensor in mm

T = temperature sensor
F = humidity sensor
TF = combisensor temperature / humidity
C = sensor for connection to Ex / Red/ InCos-D
B = sensor for connection to Ex / Red/ InBin-D

Pro-.. sensor for connection

Ex is for use in zone 1, 2 , 21, 22

In is for use in non classified industrial areas

Description ..Reg controller

Ex Reg - V - 300 - A
A = Type with analog signals for external communication

The number shows the control range of the controller in Pa (V-type only)

V = volume flow control / pressure control

Reg controller

Ex is for use in zone 1, 2 , 21, 22

In is for use in non classified industrial areas

53
Product Catalogue

Installation according to ATEX (Zone system)

Installation zones

Safe area Ex area

(Ordinary location) (Hazardous location)
Quarter-turn actuator
ExMax.. / RedMax..

5 4 3 2 1

Valve actuator
ExRun../ RedRun..

1 Explosion proof actuator (ExMax / RedMax, ExRun / RedRun) 4 Supply or control cable
2 Supply cable approximate ~ 1 m (39.4") 5 Supply or control cable reaches into the safe area…
3 Junction box in increased safety Ex-e technology

54
Product Catalogue

Installation according to NEC 500 (Division system, North America)

Installation FM / CSA Div. classes

Safe area Ex area

(Ordinary location) (Hazardous location)
Quarter-turn actuator
ExMax.. / RedMax..*

max. 18"
2

7 6 5 4 3 1

Valve actuator
ExRun../ RedRun..*

1 Explosion proof actuator (ExMax / RedMax, ExRun / RedRun) 5 Connecting device, max. length 0,46 m (18")
2 Elbow device … 6 Seal fitting for horizontal or vertical conduits …
3 Connecting device … 7 Connecting device reaches into the safe area …
4 Conduit box …

* Variants for North America on request!

55
Product Catalogue

Valve automation
Quarter-turn actuators Linear motion actuators

..Max ..Run
¼-turn actuator Linear actuator

Valve linkage Valve linkage

example example

Valve
example

Valve
example

56
Product Catalogue

Valve automation
Schischek valve linkages

~ 210 ~ 95
Option 1
You make the linkage yourself or source it

~ 80
somewhere else. In that case we would be
happy to provide you with all the actuator
dimensions necessary to do so. We can ~ 231
even give you STEP files you can import
directly into your CAD system.

36
M
4
(6

118,5
x)

18
-8
47,7

de

44
ep

70
74
37

35

V12
x)
(6

77,6 30
4

Title
4,

ExMax 5.10-Y / 15.30-Y

118,5 60
E X P L O S I O N P R O O F Dimensions
. . . . List of parts . Project Signed . .
. . . . Substitute for . Actuator Checked . .
. . . . Origin . ExMax Approved . .
. . . . Drawing No. Rev
Schischek GmbH
. . . . Mühlsteig 45
Gewerbegebiet V 090.0000.A4_Dimensions
A0 . . . D-90579 Langenzenn

Rev Description Date Vis Project No. . Scale 1:2 Sheet 1 / 1 A3

-A- -B- -C- -D- -E- -F- -X- -Y- -Z-

Flange
Square Two flat Fitting key Flange type DIN 5211 Thread Hole diameter Height thickness Distance Torque Nominal size Material
9 9 12 F03 M mm mm mm mm Nm DN standard

Option 21114 11
14
14
18
F04
F05
UNC
UNF
Zoll
Zoll
Zoll Zoll Zoll lb-in
-U-
Zoll
-V-
VA
AISI 316
17 17 22 F07 Increment
Schischek designs and delivers
19 the linkage
19 F10 mm mm
22 22 F12 Zoll Zoll

We can quote you a price27for a linkage

27
for
Other Other Other Other
any typical valve mounting pattern
mm
and stem
mm mm
Spindle
U Adapter plate Area for screw connecetion
(for example ISO 5211) without Zoll
knowing the
Zoll Zoll A
exact valve dimensions. A
V

E
D

When you order the linkage however, we

need the dimensions of the top plate / mount-
F

ing pattern as well as the stem shape and

dimensions to design the linkage. The cut
sheet for your valve will typically have that
information. Simply send us the cut sheet
and we will do the rest. X
Y

B C

Title

Customer Country Project

ExMax on ball valve
E X P L O S I O N P R O O F
. . . . List of parts . Project Signed . .
Armature . . . . Substitute for . Checked . .
Actuator type . . . . Origin . Approved . .
Type Manufacturer . . . . Schischek GmbH
Drawing No. Rev

2011.070.E0-USA
Mühlsteig 45
. . . .
Gewerbegebiet Süd 5
. . . . D-90579 Langenzenn

Rev Description Date Vis Project No. Scale 1:1.5 Sheet 1 / 1 A3

57
Product Catalogue

Certification with highest protection classes

ATEX • IECEx • IP66 • INMETRO • KOSHA • CSA • UL • EAC • DNV-GL

ATEX is a commonly used synonym for the ATEX directives of the European
Union. The name is derived from the French term “ATmosphère EXplosible”.
The directive encompasses explosion protection directives 2014/34/EU for equip-
ment and 1999/92/EG for work areas. ATEX directives are devised by the Director
General of the EU commission Enterprise and Industry in cooperation with the
member states, standardization organizations (CEN, CENELEC) and so called
“Notified Bodies” such as BAM, PTB, or TUEV to name examples from Germany.

IECEx is an internationally used process to certify electrical equipment used in

hazardous locations. The code defines a system to classify locations with poten-
tially explosive atmospheres caused by gases, dusts, or fibers for example.
The main goal of the International Electrotechnical Commission IEC with the
IECEx regulation is to reach global harmonization of codes governing use of
electrical apparatus in hazardous locations. IEC promotes mutual acceptance
of evaluations and reports among the testing labs and certifying bodies.

IP66
IP66 stands for Ingress Protection and denotes the protection of the device
against environmental factors, dust and rain for example, as well as protection of
living beings against dangers of touching high voltage circuits for example. The
first digit categorizes ingress of solid objects, the second ingress of water:
• IP6X = dust proof
• IPX6 = water jet proof (with specifies water pressure etc.)

INMETRO (National Institute of Metrology, Quality and Technology) is Brazil’s

government body responsible for the implementation of measurement, safety and
quality standards for electrical and electronic products. It guides the activities of
accreditation, inspection, testing and certification bodies in the country.

KOSHA (Korea Occupational Safety and Health Agency) aims to contribute to the
national economy by maintaining and improving the safety and health conditions
at work through the efficient implementation of projects such as research and
development, promotion of industrial accident prevention technologies, provision
of technical assistance and training on occupational safety and health, inspection
on dangerous facilities and equipment.

58
Product Catalogue

Certification with highest protection classes

ATEX • IECEx • IP66 • INMETRO • KOSHA • CSA • UL • EAC • DNV-GL

CSA is a global provider of testing and certification services.

CSA is also on the OSHA list of nationally recognized testing laboratories, NRTL.

UL is an independent organization that tests and certifies products with regards

to safety. UL tests and evaluates compliance of products, components, materials,
and systems against specific requirements. As a result the UL mark can be carried
as long as the standards are complied with. UL is one of the OSHA endorsed test-
ing labs. OSHA is the Occupational Safety and Health Administration and main-
tains a list of labs called NRTL, short for nationally recognized testing laboratories.

In the context of the Eurasian Customs Union new technical rules were continu-
ously introduced since June 12, 2012 in order to create a common economic area.
This also affects equipment intended for use in potentially explosive atmospheres.
As part of this change, the GOST-R Explosion protection certificate was replaced
by the new technical regulation TR CU 012/2011 “On the safety of equipment
for use in potentially explosive atmospheres”. Instead of the previously required
GOST-R Ex certificate, it is now necessary to obtain a EAC certification.
Likewise, the RTN approval process has been replaced by the TR CU regulations.

DNV GL offers classification and certification of ships as well as technical

assurance along with independent expert advisory services for the oil & gas and
energy industries. As a classification society they set technical rules for design
and construction of ships and issues them as design rules. Design rules do not
only contain strength calculations for design and dimensioning of ship construc-
tions but also technical requirements for installed equipment.

59
 Information about electrical explosion
protection according to ATEX directives *

Regulations for explosion protection The type plate and its components
ATEX Responsibilities especially to intrinsically safe circuits. Intrinsically
Since July 01, 2003 the rules of explosion protec- The responsibility for compliance with all regula- safe circuits and non-intrinsically safe circuits need
tion in the EU are set out by directive 94/9/EC (as of tions and directives, from production and planning to be separated. Minimum distances (tight string
April 20, 2016: 2014/34/EU) concerning equipment to installation, operation and maintenance, has length) between bare connections must be ob-
and protective systems for use in potentially explo- greatly increased. served, the cables must not produce any inadmis-
sive atmospheres. The aim was to replace national Each individual must be clear on the fact that he sible external inductance or capacitance. The maxi-
provisions in favor of uniform EU-wide rules and accepts personal responsibility as part of an overall mum admissible electrical limits of Ex-i equipment
regulations to establish uniform safety standards project: must be observed at all times. Intrinsically safe and
and to eliminate barriers to trade. In 1996, direc- • building owners non-intrinsically safe electrical circuits may not be
tive 94/9/EC (as of April 20, 2016: 2014/34/EU) • end-users connected together. Connections between two
was transposed into German law by the German • architects different intrinsically-safe circuits are permitted on
Equipment Safety Act (recast: Product Safety • consulting engineers / control companies the condition that a calculation shows that intrinsic
Act) and the Act on Explosion Protection, in short • inspection authorities safety is not compromised.
ExVO (11th GPSGV). While directive 94/9/EC (as • contractors / installers Intrinsically-safe circuits have to be marked as
of April 20, 2016: 2014/34/EU) defines construc- • manufacturers such. When marking is done by means of colors,
tion requirements, i.e. it is of particular interest to • product suppliers “light blue” color has to be used. This colour is rec-
manufacturers of explosion-proof equipment, op- • maintenance engineers ommended for all intrinsically safe circuits to pre-
erators of installations have to observe directive Example, for the labelling of a quarter turn actuator vent confusion and/or connection to a non-intrinsi-
1999/92/EC for the safety of workers endangered Manufacturer’s name, manufacturer’s address, cally safe circuit. Examples: cables, wiring, cable
by explosive atmospheres. In Germany, this direc- designation of type, electrical data (V, A, W, Hz) conduits, terminals, terminal boxes, cable glands ...
tive is transposed into German law by the Industrial ambient temperature if different from −20 to +40°C, A minimum distance of 50 mm between intrinsi-
Safety and Health Act (BetrSichV). unit serial number, in addition to the classification cally safe and non-intrinsically safe circuits has to
On April 20, 2016, the ATEX directive 94/9/EC will of Ex protection. be maintained, and a minimum distance of 6 mm
be replaced by the new directive 2014/34/EU. Many between two different intrinsically safe circuits.
changes in the new directive are not relevant for Ser.-No. 090.1036 19384001 During installation the cables of intrinsically safe
manufacturers of explosion-proof equipment.Most ExMax-15-SF and non-intrinsically safe circuits are to be routed
EPS 17 ATEX 1 132 X
of the essential content remains the same, for ex- IECEx EPS 17.0065X separately !
II 2 (2) G Ex db [ib Gb] IIC T6, T5 Gb
ample, Annex I “Criteria determining the classifica- II 2 (2) D Ex tb [ib Db] IIIC T80°C, T95°C Db Suggestion on how to design a panel
tion of equipment-groups into categories” and the It is necessary to keep intrinsically safe and non-
essential health and safety requirements (EHSR; intrinsically safe equipment separate. It is recom-
Annex II) of the directive do not change. Important
for both manufacturers as well as operators and Correct installation mended, in this case, that a sufficient distance be
kept, to avoid extra costs in the future.
plant manufacturers is that EC-type examination For the installation of electrical systems in areas Large transformers, frequency converters, large
certificates issued in accordance with directive with explosive atmospheres of group II, standards relays and other electric equipment that may in-
94/9/EC are still valid. A recertification according IEC 60 079-14 (EN 60079-14) or VDE 0165 apply. fluence intrinsically safe circuits by inductance or
to directive 2014/34/EU is therefore not required. In Germany however solely the Technical Rules capacitance should be installed at a sufficient dis-
ExVO for Occupational Safety grant the presumption of tance. As a precaution Ex-i equipment should have
Directive on the distribution of equipment and pro- conformity with the Industrial Safety and Health Act a suitable cover to protect it from incorrect han-
tection systems for potentially explosive areas – ex- (BetrSichV). dling. The appropriate standards and regulations
plosion protection ordinance 11.GSGV. Electric circuits of protection types d, e, q, o, m, p must be observed.
Ordinance on Industrial Safety and Health Installation in the control panel is identical to
Ordinance concerning the protection of safety and
health in the provision of work equipment and its
“standard” installation, however the procedures
for connecting Ex equipment must be followed. ATEX
use at work, concerning safety when operating in- This relates, for example to voltage, current, fuses
stallations subject to monitoring and concerning the and motor protection equipment, etc. The require-
organization of industrial safety and health at work. ments for specific products need to be taken from
their corresponding test certificates, standards and
Atmosphère
Certificates
Corresponding approvals and certificates are
required for electrical explosion protected equip-
regulations as well as from the user manual. It is
only permitted to work on electric circuits within the Explosible
Ex-area (for example when making connections in
ment. Testing must be carried out by an official test-
an Ex-e terminal box) when the voltage has been
ing agency (Notified Body, for example the PTB,
switched off. An Ex-e terminal box should only be
Physikalisch Technische Bundesanstalt in Braun-
opened after the voltage has been switched off.
schweig/Federal German Physical and Technical
Institute in Braunschweig). ATEX approvals are Electric circuits of protection type “i” (intrinsic safety)
also accepted in many countries and states outside For the planning and operation of switchgears and
Europe. control systems installed in the safe area, but which
contain circuits leading into the Ex-area, certain
requirements need to be considered. This applies

*from April 20, 2016 replacement of ATEX 94/9/EC directives with directives according to ATEX 2014/34/EU

60
Product Catalogue

Labelling of explosion
Labelling of explosion proof according
proof equipment equipment according
to ATEX 2014/34/EUto ATEX 2014/34/EU
Classification and labelling
Classification of hazardous
and labelling locations
of hazardous locations Classification
Classification Explosion
Explosion groups & classes
groups & Temperature Temperature classes
(gases, mists, vapours)
Flammable Hazardous locations Classification Product classification Equipment Explosion Examples depending on
medium Probability of a of hazardous protection group - explosion group
potentially explosive locations level - temperature class
atmosphere occuring Product Product (EPL)
group category
Ammonia Ethanol Petrol Acetal-de-
Continuously, for long Methane Cyclohe- Diesel fuel hyde
periods or frequently Zone 0 II IIA Ethane xene Fuel oil
Propane n-Butane n-Hexane
IIB
Gases, City gas
Acrylic
Ethylene
Ethylene
Ethyl glycol Ethyl ether
mists, Likely to occur Zone 1 II 1G Ga IIC nitrile oxide
Carbon
hydrogen
vapours
2G Gb
Hydrogen Acetylene Carbon
Infrequently and for short disulphide
periods only Zone 2 II 3G Gc

Attention: this list is only an extract of possible flammable

T1<450°C mediums and does not claim to be complete !
Continuously, for long
periods or frequently Zone 20 II
T2<300°C
T3<200°C
Dusts Likely to occur Zone 21 II 1D Da
T4<135°C
2D Db
Infrequently and for short T5<100°C
Zone 22 II 3D Dc
periods only
T6< 85°C
Notified bodies Product use depending on temperature class (T1 - T6). The temperature
class indicates the max. temperature of the exposed surface of the
Code Notified Body (NB) product. For dust explosion proof, the max. surface temperature is
number directly shown (e.g. T80°C).

0102 PTB (Germany) Temperature class

0158 EXAM (Germany)
Example:

II 2 G Ex db IIC T6 Gb NB 12 ATEX 1007 X

0158

II 2 D Ex tb IIIC T80°C Db
Prevents transmission of flameproof da 0,1, 2 IIIA flammable fibres
the explosion outside enclosure Exd db 1, 2 EN 60079-1
IIIB
dc 2
IIIC non conductive dust
For common use –
Prevents high increased Exe eb 1, 2
EN 60079-7
temperatures and sparks safety ec 2 conductive dust

ia 0,1,2,20,21,22 Code Dust classification

Low current /voltage supply intrinsic safety Exi ib 1,2,21,22 EN 60079-11
ic 2,22
pxb 1, 2, 21, 22
Positive pressure device pressurised Exp pyb 1, 2, 21, 22 EN 60079-2 long periods of For use under
apparatus pzc 2, 22
8 –
immersion special conditions X
ma 0,1,2,20,21,22 the effects of tem-
7 – porary immersion
Encapsulated moulding Exm mb 1,2,21,22 EN 60079-18
mc 2,22 6
totally protected strong jets of
against dust water
Parts immersed in oil to isolate
oil immersion Exo ob 1, 2
EN 60079-6 5
dust - limited low pressure jets
from explosive atmosphere oc 2 ingress from all directions This part is an Ex
solids objects sprays from all component and
4 > 1 mm directions certified as such and
Prevents transmission of Exq qb
explosion outside powder filling 1, 2 EN 60079-5 is therefore not
solids objects direct sprays up to suitable for use on
3 > 2,5 mm 60° from vertical its own U
solids objects direct sprays up to
As above, but for use in
protection “n” Exn nC 2
EN 60079-15 2
> 12,5 mm 15° from vertical CE conformity is
zone 2 nR 2
achieved by
solids objects vertical falling
1 incorporation into
ta 20, 21, 22 > 50 mm drops of water
equipment
protection by tb
Dust explosion proof
enclosure Ext 21, 22 EN 60079-31
no protection no protection
tc IP66
22 0

Protection principle Type of Code Sym- To use CENELEC IP Protection Protection Application Code
protection bol in zone against against
solids/dust water
Protection principle – Type of protection – EN 60079-0 General Requirements Ingress Protection EN 60529 Further information
© Rotork GmbH | Schischek Explosionproof

61
Product Catalogue

Where and when do I have to take explosion proof into consideration ?

Explosion proof means: “Protection of Life. Health. Assets.”
When does the danger of an explosion occur ? Is your system safe ? Typical Applications:
A danger of explosion occurs when a flammable • Chemical, pharmaceutical and industrial plants
We have the following situation NOW
medium (gas, vapor, mist or dust) is present in a • Refineries, petrol depots, gas stations
or in the FUTURE:
dangerous quantity.
Yes.No (Please check) • Paint and solvent shops
When does an explosion occur ? • Drying and coating cabinets
An explosion may occur when the following 3 com- □ □ Flammable materials are stored.
□ □ Flammable materials are used. • Laboratories in industry and schools
ponents are present at the same time:
• Water treatment works, power plants
• Flammable or combustible media □ □ Flammable materials are bottled.
• Compressor stations, gas works
• Oxygen □ □ Flammable materials are used during
the cleaning process. • All kinds of storekeeping and stocks
• Source of ignition
• All kinds of filling stations
□ □ Flammable materials are used in the
production process. • All kinds of cleaning stations
Explosion
□ □ Flammable materials will be produced • Mills, silos, silos for bulk goods
Flammable during the production process. • Offhore and onshore
Media
• Oil and gas pipelines
6 × “No”: Obviously you do not • Printing works, food industry, …
need explosion protection
Schedule:
at least 1 × “YES”: • Analyse whether you need explosion protection
Oxygen Source of When planning you have to consider rules, or not
ignition regulations and instructions concerning • Ask experts in order to analyse the risk
explosion protection • Define zones, areas, categories, explosion
groups and temperature classes
Example: ATEX directives, EN 60079-14
• Planning according to all necessary rules
and regulations
Typical sources of ignition Remarks:
• Choose the best supplier and the right product
Very often the cause of an accident is self-ignition, All information, tables, checklists and further docu-
mentation are only for your assistance and do not • Keep to the installation rules
hot surfaces and mechanically generated sparks.
claim to be complete. In no way do they replace • Check the labelling of the equipment
But there are also a lot of other sources of igni-
tion, caused by either mechanical and / or electrical official regulations and rules or even laws by the • Make sure that the appliance will be put into
equipment: authorities. We want to point out that it is very im- operation correctly
portant to undertake all measures for an exact clas- • Confirm a final inspection by the responsible
• Self-ignition
sification of the Ex-area. authority
• Extraordinary surface temperatures
• Guarantee regular and correct maintenance
• Open flames
according to the regulations
• Mechanically generated sparks
• The correct documentation has to be maintained
• Static electricity
• Lightning strike
From combustion to detonation
• Ultra-sonic Effect and reaction velocity increase significantly
• Chemical sources of ignition from combustion, deflagration, via explosion up to
• Electric sparks detonation. Explosions are more likely with gase-
• Electric arcs ous media and detonations with dust media.
• Adiabatic compression
• Adiabatic shock waves
Effect

• Electric circulating currents Detonation

Explosion

Deflagration

Combustion

Reaction velocity

62
Product Catalogue

Zones • Explosion groups • Temperature classes

Introduction Classification and labelling of hazardous locations
Areas with potentially explosive atmospheres are
Flammable Hazardous locations Classification Product classification Equipment
divided into zones, equipment has to be divided medium Probability of a of hazardous protection
into groups and categories. The marking on the potential explosive locations level
Product Product
identification plate of certified equipment indicates atmosphere occuring Group Category (EPL)
in which zone the explosion protected equipment
can be used. Continuously, for long
periods or frequently Zone 0 II
Division into product groups
Equipment is divided into group I and group II. Gases Likely to occur
Group I deals of underground mines and group II Vapours Zone 1 II 1G Ga
deals with all other applications. Mists
2G Gb
Division into zones Infrequently and for short
periods only Zone 2 II 3G Gc
Areas with potentially explosive atmospheres are
divided into six zones according to the probability of
how frequent and for which period of time a poten- Continuously, for long
tially explosive atmosphere (p.e.a.) exists. periods or frequently Zone 20 II
A distinction is made between combustible gases,
mists, vapors and combustible dust. For gases, Likely to occur
Dusts Zone 21 II 1D Da
mists and vapors zones 0, 1 and 2 exist, in which
the requirements for the chosen equipment in- 2D Db
crease from zone 2 to 0. Equipment in zone 0 must Infrequently and for short
periods only Zone 22 II 3D Dc
be built in a way "that even if a type of protection
fails or if two faults occur, that sufficient explosion
protection is guaranteed". Therefore for example a
passive, potential free sensor, installed in zone 0,
and connected to an intrinsically safe electric cir-
Zone 0, 1 and 2 Division into explosion groups
cuit (II 2 (1) G [Ex ia] IIC), needs its own approval.
Explosion protected equipment for gases, mists
Zones 20, 21 and 22 are for dust atmospheres, in
and vapors is divided into three explosion groups
which the requirements for the chosen equipment    (IIA-IIB-IIC) according to the type of protection be-
increase from zone 22 to 20. Equipment in zone 20
ing used. The explosion group is a means to meas-
and 21 need special approval.
 ure the ignitability of gases (potentially explosive at-
Division into equipment groups mospheres). The equipment requirements increase
Equipment groups determine, in which zones the from IIA to IIC.
equipment may be installed. Once again there 
are six categories. Categories 1G, 2G and 3G
are classifications for gas explosion protection
  
(G = Gas); thereby 1G equipment is suitable for use An example of a typical zone distribution would be filling
in zones 0, 1 and 2, 2G equipment is suitable for a barrel of petrol in an enclosed area.
use in zones 1 and 2 and 3G equipment is suit- 
able for use in zone 2. Categories 1D, 2D and 3D Zone 20, 21 and 22
are classifications for dust explosion protection (D
= Dust); thereby 1D equipment is suitable for use
in zones 20, 21 and 22, 2D equipment is suitable    Division into temperature classes
for use in zones 21 and 22 and 3D equipment is
Explosion proof equipment, installed within an Ex
suitable for use in zone 2.  area, is divided into 6 temperature classes (T1 to
T6). The temperature class is not – as it is often
wrongly believed – the operating temperature
 range of the equipment, but the maximum permis-
sible surface temperature of the equipment, in rela-
tion to + 40°C ambient temperature on any surface
An example of a typical zone distribution would be filling area, which may not be exceeded at any time. The
a grain silo in an enclosed area. maximum surface temperature must remain below
the ignition temperature of the surrounding medium
at all times. The equipment design requirements
Explosion groups, temperature classes increase from T1 to T6.
The equipment groups and categories determine,
in which zones the equipment may be installed,
whereas the explosion groups and temperature      
classes determine, for which mediums inside the      
zones, the equipment is suitable. The type of pro-
tection used is not a mark of quality but is instead
a constructive solution for selecting equipment for
explosion protection.    

63
Product Catalogue

Ex applications
Air safety dampers • Air control dampers • Fire / smoke dampers

Air damper control

Schischek actuators are approved for direct installation and operation
in explosive atmospheres, as they are of the highest explosion groups
and temperature class and are suitable for all gases, mists, vapors and
dust.
During installation please ensure that all cables are securely fixed
and connected in such a way that they are protected from mechanical
damage. For electrical connection an explosion protected terminal box
(type ExBox-...) has to be used.

Automatic air damper control

In this example the control system consists of an actuator and an Ex-
Cos-D transmitter with ExPro sensor. The combination can be installed
directly in an Ex area. The transmitter converts the sensor signal into
an active signal (0...10 VDC or 4...20 mA) for input in a PLC system.
The output signal from the controller goes directly to the actuator.
Between sensor and controller an additional Ex-i module and intrin-
sically safe (IS) circuit wiring are not required. For the actuator and
transmitter the maximum permissible surface temperatures have to be
taken into account.

      

Control of fire/smoke dampers
In applications for fire / smoke dampers, the actuator has to reliably re-
turn the damper to its safety position via an external switch / contact.
The actuator closes the damper mechanically by means of an internal
spring. The closing operation is triggered by a safety thermal trigger of
 type ExPro-TT-...
 

 

 

64
Product Catalogue

Ex applications
Heating • Cooling • Humidification • Diff.pressure control • VAV

Heating/ cooling control

In this example the control system consists of an actuator and an Ex-
Cos-D transmitter with ExPro sensor. The combination can be installed
directly into an Ex area. The transmitter converts the sensor signal into
an active signal (0...10 VDC or 4...20 mA) for input in a PLC system.
The output signal from the controller goes directly to the actuator.
Between sensor and controller an additional Ex-i module and intrin-
sically safe (IS) circuit wiring are not required. For the actuator and
transmitter the maximum permissible surface temperatures have to be
taken into account.

Humidity control
In this example the control system consists of a valve actuator and
an ExCos-D transmitter with ExPro sensor. The combination can be
installed directly into an Ex area. The transmitter converts the sensor
signal into an active signal (0...10 VDC or 4...20 mA) for input in a
PLC system. The output signal from the controller goes directly to the
actuator.
Between sensor and controller an additional Ex-i module and intrin-
sically safe (IS) circuit wiring are not required. For the actuator and
transmitter the maximum permissible surface temperatures have to be
taken into account.

Differencial pressure control/VAV

In this example the control system consists of an actuator and a differ-
ential pressure ExCos-P transmitter. The combination can be installed
directly in an Ex area. The transmitter converts the differential pressure
signal into an active signal (0...10 VDC or 4...20 mA) for input in a
PLC system. The output signal from the controller goes directly to the
actuator.
Between sensor and controller an additional Ex-i module and intrinsi-
cally safe (IS) circuit wiring are not required. The controller is located
in the safe area and delivers an output signal for example via a fre-
quency converter to control a fan (must be Ex protected) or a modulat-
ing damper actuator (also Ex protected) to maintain the required air
volume /pressure. The technical specifications can be found in the ap-
proval documents.

65
Product Catalogue

Ex applications
Thermostats • Humidistats • Pressostats • Filter monitoring

Thermostats
ExBin-D... modules with ExPro-BT... sensor are thermostats for use
in potentially explosive atmospheres. No intrinsically-safe electrical
circuits and no switching amplifiers need to be installed in the electri-
cal control-panel. The module may be installed directly in an Ex area,
depending on demand in zone 1, 2, 21 or 22.
The output contact can be used for follow-up functions (relays, con-
tacts, direct circuit, ...).

Hygrostats
ExBin-D... modules with ExPro-BF... sensor are hygrostats for use in
potentially explosive atmospheres. No intrinsically-safe electrical cir-
cuits and no switching amplifiers need to be installed in the electrical
control-panel. The module may be installed directly in an Ex area, de-
pending on demand in zone 1, 2, 21 or 22.
The output contact can be used for follow-up functions (relays, con-
tacts, direct circuit, ...).

  
Filter monitoring
ExBin-P... modules are pressostats like Ex-differential pressure switch-
es, e.g. for filter monitoring in potentially explosive atmospheres. No
intrinsically-safe electrical circuits and no switching amplifiers need to
be installed in the electrical control-panel. The module may be installed
directly in an Ex area, depending on demand in zone 1, 2, 21 or 22.


The output contact can be used for follow-up functions (relays, con-
 tacts, direct circuit, ...).


66
Product Catalogue

Ex applications
Drive (Fan) belt monitoring • Frost protection

Drive (fan) belt monitoring via differential pressure

ExBin-P... modules are pressostats like Ex-differential pres-
sure switches, e.g. for fan belt monitoring in potentially explo-
sive atmospheres. No intrinsically-safe electrical circuits and no
switching amplifiers need to be installed in the electrical control-
panel. The module may be installed directly in an Ex area, depending
on demand in zone 1, 2, 21 or 22. To indicate fan failure switching
modules are delivered with integrated time running relay with delay on
start up.
The output contact can be used for follow-up functions (relays, con-
tacts, direct circuit, ...).

Frost protection
ExBin-FR... are sensors for frost protection monitoring with a
capillary as measuring element for use in potentially explo-
sive atmospheres. No intrinsically-safe electrical circuits and no
switching amplifiers need to be installed in the electrical control-
panel. The module may be installed directly in an Ex area, depending
on demand in zone 1, 2, 21 or 22.
The output contact can be used for follow-up functions (relays, con-
tacts, direct circuit, ...).

Duct Fan
Fan belt monitoring via Namur sensor
EXL-IR-9170 switching modules in combination with connected Namur
sensor (inductive proximity switch) are suitable for non-contact V-belt
monitoring of fans in hazardous locations.
The switching module is installed in the safe area. Wiring is via an in-
trinsically safe Ex-i circuit. The proximity switch type Namur is installed
Ex area

in the hazardous location, depending on the sensor type and certifica-

tion in zone 1 or 2.
The input of the switching module is a passive, potential-free, binary
signal, the output is a potential-free, switching contact.
Safe area

normal circuit

Ex-i circuit
EXL-IR-9170 (intrinsically safe)

67
Keeping the World Flowing
Since 1957, Rotork has grown to be a major international business with sub-
sidiaries all around the world.
"For over sixty years, en-
When you turn on a tap or switch on a light, turn on a kettle or put fuel
in your car, a flow control product is being used somewhere in the process
gineers have relied upon
of delivering that service. Rotork for innovative,
dependable solutions to
We are recognised as global leaders, designing and building the most
reliable products, backed up by highly acclaimed customer service. manage the flow of
liquids, gases and pow-
Rotork has established manufacturing facilities, a global network of local of-
ders. From safety systems
fices and agents who can truly provide a worldwide service. You will be able
to locally source Rotork's products, supported by life-of-plant maintenance, that may be needed
repair and upgrade services. just once in a lifetime to
process controls that are
Committed to Innovation constantly on the move,
At every stage in the company's history, Rotork's engineers have focused Rotork flow control
on solving customer challenges and developing new solutions with levels products remain the clear
of engineering skill and creativity that our competitors still cannot match. choice, worldwide".
With every product that Rotork develops, you can be sure of one thing:
That quality and reliability are an integral part.

Serving the World

Rotork has always been committed to global supply, supporting operations
in some of the most remote and challenging environments.
We have established manufacturing facilities across the globe which together
with our own global network of local offices, regional Centres of Excellence
and agents provide over 800 Rotork outlets worldwide.

68
Electric Control Valve Actuators and Gears (Extraction)

IQT CK
range range

Multi-turn and part-turn electric actuators Modular design electric valve actuators
IQT part-turn 1-phase, 3-phase and DC electric actuators are CK range actuators are suitable for valves in non-hazardous
designed for isolating or regulating duties (S2 & S3 /Class A & B) locations. The modular product range facilitates a number of dif-
of up to 1,200 starts per hour. ferent control package configurations to meet your application
• Direct torque output range from 50 to 3,000 Nm requirements.
• Continuous position tracking at all times, even without power • Multi-turn output torque up to 10,800 Nm (8,000 lbf.ft)
• Extended life and mounting in any orientation with oil bath • Part-turn output torque up to 205,600 Nm (151,600 lbf.ft)
lubrication • Modular design provides an off-the-shelf solution for spares and
• IP66/68 certified upgrading
• Safe, motor-independent, handwheel operation available at • Plug and socket connection for easier field wiring
all times • Continuous valve position indication even during power loss
• Explosionproof and certified for safety applications (SIL2/3) • Non-intrusive setting via infrared or optional Bluetooth® with the
are available intelligent CKc - Centronik module
• Hollow output drive to accept rising valve stems
• Detachable base options
• Secure manual handwheel drive fully independent of the motor
drive train
• IP68 rating (8 m for 96 hrs) as standard provides enhanced
environmental protection

ROM/ROMpak Gears…
ranges ranges

Compact and lightweight part-turn actuators Valve gear operators and accessories
Electric, compact and lightweight part-turn actuators with Rotork offer a wide range of gearboxes spanning the following
efficient and simple gearing. categories:
• Torque range 8 to 800 Nm (6 to 590 lbf.ft) • Part-turn output manual gear operators
• On/off duty, manual override, self-locking, ISO flanges • Part-turn output motorised gear operators
• Available with local controls and phase rotation correction • Multi-turn output manual gear operators
• Wide range of supply voltages available • Multi-turn output motorised gear operators
• 1-phase, 3-phase and DC power supply options • Specialised application gear operators
• Watertight IP68 rating • Mounting kits and accessories
• High speed variant available
• Mechanical and LED local position indication
• Options: Bus communication, analogue control and feedback

69
Electric Control Valve Actuators (Extraction)

CMA
range

CML 1500 (Linear) CML (Linear) CMQ (Part-turn) CMR (Multi-turn)

Linear, part-turn and multi-turn actuators

The Rotork CMA delivers a range of sizes suitable for almost • Accurate and repeatable position control
all linear, part-turn and multi-turn control valves and other • 4-20 mA loop powered feedback signal
applications requiring exact position control and continuous • Options:
modulation. Suitable for demanding applications including - local controls including positional display
control valves, metering and dosing pumps. - Reserve Power Pack (RPP) including local controls and positional
• CML Linear up to 20 kN (4,500 lbf) seating thrust display
• CMQ Part-turn up to 124 Nm (1,100 lbf.in) seating torque - configurable ESD input for end of travel or stayput emergency
• CMR Multi-turn up to 45 Nm (400 lbf.in) rated torque shutdown function
• Powered by 1-phase or DC supplies
• Continuous modulation to S9 (IEC 60034), Class D duty (EN15714-2)
• Permanently lubricated and maintenance free drive train

CVA
range

CVL (Linear) CVQ (Part-turn) CVL-5000 (Linear)

Linear and part-turn precision modulating actuators

• CVL Linear: thrust range 890 to 22,241 N (200 to 5,000 lbf) • Analogue, digital and network control options
• CVQ Part-turn: torque range 54.2 to 271 Nm (480 to 2,400 lbf.in) • Watertight IP68, NEMA 4 & 6, explosionproof enclosures
• Compact, viable alternative technology when good quality • Non-intrusive setup / calibration using Bluetooth® wireless
instrument air is not available in hazardous areas technology
• Ultra-low energy consumption, suitable for solar powered • Options:
applications - 1-phase and DC power supply options
• Continuous, unrestricted modulation to S9 (IEC 60034), - PakscanTM, HART®, Profibus®, Foundation Fieldbus® and
Class D duty (EN15714-2) Modbus® available
• Unparalleled accuracy, repeatability, resolution and stiffness - Programmable fail-to-position option
• Perfect for demanding applications including control valves and - Hardwired control
metering pumps - Intrinsically safe I/O connections
• Comprehensive data logging - Manual override

70
Fluid Power Actuators (Extraction)

K-TORK GT /GTS
range ranges

Pneumatic vane actuators Pneumatic rack and pinion actuators

• Pneumatic actuators in double-acting and spring-return • Double-acting and spring-return pneumatic actuators
configurations • NEW: now also available in stainless steel (GTS range)
• Compact no-sideload, constant-torque design with • Torque output up to 15,300 Nm (GTS range 1,190 Nm)
output to 18,300 Nm (13,497 lbf.ft) • Fail close / fail open
• Certified to IP66M/IP67M and meets NEMA 4/4X • Extruded aluminium body with cast aluminium end caps
• Certified to ATEX 2014/34/EU (GTS range in stainless steel 316L)
• Complies with ANSI/AWWA C540-02 and C541-08 • Mechanical interfaces to ISO 5211, EN 15714-3-4,
• Conforms to VDI/VDE 3485 control accessory mounting NAMUR VDI / VDE 3845
standards • Certified to ATEX 2014/34/EU
• Modulating accuracy of 0.25% or better • Certified up to SIL3 as a single device (IEC 61508) by GT range
• Capable of millions of operations at fast cycle times • Travel stops in both open and close direction (GTS range)

RC200 Skilmatic SI
range range

Compact scotch yoke actuators Electro-hydraulic actuators

• Extremely compact scotch yoke pneumatic actuator • 1-phase, 3-phase or 24 VDC power supply
• Torque output up to 4,400 Nm (3,245 lbf.ft) • Linear output up to 5,500 kN (1,236,000 lbf)
• Contained spring module for safety and convenience • Part-turn output up to 500,000 Nm (368,781 lbf.ft)
• Double-acting and spring-return configurations • Configurable Partial Stroke Testing (PST)
• Fail close/fail open • Failsafe to close, open or lock in last position
• For on/off and modulating • Spring-return or double-acting
• Valve mounting dimensions per ISO 5211/DIN 3337 • Configurable via Bluetooth®
• Certified to ATEX 2014/34/EU • Data logger, recording up to 3,000 events
• Certified to PED 2014/68/EU • Watertight and explosionproof according ATEX, IEC and
• Suitable for use at SIL3 as a single device in accordance EAC, TÜV Functional Safety SIL certified to IEC 61508:2010
with IEC 61508 • Operating temperature −50 °C to +70 °C (−58 to +158 °F)
• Optional emergency manual override suitable to operate • Network options PakscanTM, Profibus®, Modbus®, HART®
the actuator in the event of fluid supply failure and Foundation Fieldbus®
• Positioning control option 4-20 mA input and output,
resolution 0.3%

71
 Site Services
Rotork Site Services provide our customers with the
extensive onsite technical expertise required to ensure the
successful functioning of installations anywhere around
„In each of our business ar-
the globe.
eas our Site Services Team
We provide a comprehensive selection of programs is dedicated to customer
around the topic Flow Control: service and support from
the commissioning of new
• Emergency service and scheduled service installations and support-
ing customised automated
• Actuator overhauls
processes to implementing
• Status checks retrofit packages.
The teams are available in
• Preventive maintenance service centers worldwide
• Installation of actuators on existing valves and are supplemented by
factory-trained specialists“.
• Plant shutdowns

• Certified inspection and safety checks

• Factory assembly of actuators to new valves

• Plant optimization

• Repairs and upgrades

• Rental service of actuators

• System automation projects

• Advanced automation projects

72
High Plant Availability through Preventative Maintenance
Rotork actuators are recognised as the best in the world for
reliability and safety in the most demanding applications.
To maintain this hard-earned leadership position, Rotork is
"Rotork actuators incorpo-
committed to helping clients to maximise the continuous, fault- rate intelligence to satisfy
free operation and working life of all their actuators. the increasing requirements
Rotork have over 60 years of flow control experience with of actuation, now and in
expertise in all actuation applications. Let Rotork leverage this the future. Intelligent Asset
Management makes it is easy
expertise during your planned maintenance periods to maximise
to identify potential issues,
operating efficiency of your site while reducing shutdown
plan predictive maintenance
duration and frequency. and improve your operating
processes".

73
Damper Actuation Focused

Switch boxes
and position indicators

Electric actuators with

or w/o spring return

Temperature triggers
for fire-dampers

Manual operators

74
One Air-Damper – Various Actuator Solutions!

Pneumatic control components

and air preparation

Pneumatic actuators
such as rack and pinion,
scotch/yoke, vane,
electro-hydraulic

Spring assembly

Positioners

Rotork
[email protected]
+49 9101 9081-15

75
 Rotork-Schischek Sales Worldwide

Greenland

Sweden
Iceland

Finland R u s s i a
Norway

Estonia

C a n a d a United Kingdom Latvia

Denmark Lithuania

Neth. Belarus
Ireland Poland
Germany
Bel.
Lux. Czech Rep. Ukraine
Licht. Austria
Slovakia Kazakhstan
Mold.
France Switz. Slovenia
Hungary Mongolia
Croatia Romania
Italy Bos. &
Herz. Serb.
Mont. Bulgaria
Albania Mace.
Georgia Uzbekistan Kyrgyzstan
Portugal Spain Armenia Azerb. N. Korea
United States Greece
Turkey Turkmenistan Tajikistan
Japan
Gibraltar S. Korea
Malta Cyprus Syria C h i n a
Morocco Tunisia
Lebanon
Iraq Iran Afghanistan
Israel
Jordan
Algeria Kuwait Nepal
Libya Pakistan Bhutan
Western Sahara Egypt Bahrain
Qatar
Mexico Bahamas (Occupied by Morocco)
Bangladesh
Saudi Arabia U.A.E.
Cuba India Hong Taiwan
Dom. Rep.
Mauritania Laos Kong
Puerto Rico
Oman
Jamaica Haiti Mali Niger
Belize Chad
Honduras Cape Verde Senegal Eritrea Yemen Thailand Philippines
Guatemala
Nicaragua Gambia Sudan Cambodia
El Salvador Guinea-Bissau Burkina Faso Dijbouti Vietnam
Trinidad & Tobago Benin
Costa Rica
Panama Guinea Nigeria
Venezuela Guyana Sierra Leone
Cote Togo Ethiopia
d'Ivoire
Ghana Central African Republic Palau
French Guiana Sri Lanka Brunei
Liberia Cameroon
Colombia Suriname
Somalia Malaysia
Equatorial Guinea Uganda
Kenya Singapore
Congo
Ecuador Gabon Rwanda
Dem. Rep.
of Congo Burundi Papua
I n d o n e s i a New Guinea
Peru Tanzania Solomon Islands
B r a z i l East Timor
Angola Somoa
Malawi
Zambia Vanuatu
Fiji
Bolivia
Zimbabwe Mauritius
Namibia Mozambique
Botswana Tonga
Paraguay
Chile A u s t r a l i a
Madagascar
Swaziland
Lesotho
South Africa
Argentina Uruguay

New Zealand

Rotork GmbH – Langenzenn / Germany

Rotork - Schischek Sales

Contact Your Local Dealer

Rotork GmbH
Muehlsteig 45
90579 Langenzenn
Germany
Tel. +49 9101 9081- 0
Fax +49 9101 9081-77
[email protected]
www.schischek.com

To find your local contact please visit:

www.schischek.com/contact/rotork-schischek-worldwide
www.rotork.com/en/contact-us/sales-service-locator

PUB113-001-00_02/24 Technical changes, product discontinuations, literal errors and mistakes reserved.

www.schischek.com