Date: 09/06/2023

To,
BSPA INFRATECH PVT LTD.
A-98,1st Floor, Shaheen Bagh,
Jamia Nagar, Okhla,
New Delhi-110025
Kind Attention: Mr. Uma Shankar Sah

Subject: Offer For Pre Engineered Fire Suppression System.

This is with reference to your enquiry please find below our competitive offer along with sales conditions for your kind
consideration.

Offer For Pre Engineered Fire Suppression System. Site Palam

Sr No. Product Product Description Qty Rate/Unit Net Value (INR)

Extinguishing Agent : 4 Kg Clean Agent HFC227ea

(UL Listed) with Zero Ozone Depletion Potential ,
EPA & SNAP Approved Can : Stored Pressure Type,
Deep drawn and Argon welded , M.S, Sheet metal
thickness 1.5 mm, 100% Hydraulic Pressure tested.
1 4KG HFC227ea 04 27000 108000
Can as per IS:15683 Valve : The valve DLP is nickel
KANEX CEAT
plated brass, equipped with a pressure gauge to
monitor the system pressure, with a ball valve
interfacing the tubing and the cylinder
,Working pressure 10-18 bar
Tube for automatic fire detection and suppression
system made by special modified Polyamide (PA),
Color Red RAL300, High grade quality, Inner
diameter 4mm, OuterDiameter 6 MM, Melting
Point approx. 222 degrees Celsius when heating up
with
10 K/minute, Burst Pressure 100 bar at 20°C.
Temperature range: minus 40°C to +80°C. Working
Pressure 20Bar at 20°C. Burst Temperature : when
2 FDT-FD 160 900.00 144000.00
Pressurised with dry Nitrogen at 16 bar pressure
approx 100°C to 110°C, UL approved as per UL 521
STANDARD FOR HEAT DETECTORS FOR FIRE
PROTECTIVE SIGNALING SYSTEMS
T Connection, Brass, Nickle plated, for 4x6 mm
Sensor Tube, quick and easy disassembly using
special tool, working pressure 15 bars at 15 Deg
T-CONNECTION- Temperature, temperature range-40 Deg C till + 80
3 08 1300.00 10400.00
FD Deg C, Elastometric Sealings, External Diameter
tube 6mm.
 End of Line Plug for Automatic fire suppression
tube used for fitting at the tube end to terminate
the point. Fitting made by brass nickel plated
4 material with Elastomeric sealings, Temperature 08 700 5600.00
range TS
range TS -20 Deg C till + 60 Deg C, made as per
PED Pressure Equipment Directives.
End of Line adapter with Pressure gauge for
Automatic fire suppression tube used for fitting at
the end of the tube for pressurizing and re
pressurizing the tube includes check Valve,
Pressure Gauge and fitting to connect to sensor
tubing. Tube connection 6mm, length 2.77``/71mm,
5 Gauge scale :0-20 bar. Fitting made by brass
EOA-FD (plated /unplated), Stainless steel, Elastomeric 4 2500.00 10000.00
Sealings, Copper Nickle plated, Temperature range
TS -20 Deg C till + 60 Deg C, made as per PED
Pressure Equipment Directives.
Pressure Switch to monitor Pressure drop in the
tube, switch point 5 Bars. Switch Type SPST,
Normally Open, Electric Rating : 120/240 VAC-375
6 PS-FD VA, 24 VAC-125 VA, Open 160 psi y-7, Close 185 4 5000.00 20000.00
psi y-5,Pressure switch + adaptor / 5bar / M10x1

KANEX MCU Master Control Unit 4 6000.00 24000.00

7
8 Installation Installation 4 3000.00 12,000.00
Sub Total 3,34,000.00
Please Note :
a) All Necessary Pre-Engineered systems documents will be provided.
b) 2 core x 1.5 cable we are providing approx. 1.5 meters cable per system if required extra then it will be
chargeable basis.
c) Offer is based on dimensions provided by you. The Fire detection tube qty is tentative and may vary
as per actual site installation. The extra detection tube will be on chargeable basis.

d) You need to provide UPS power supply to the master control units.
GST 60120.00
Amt:18%
GrandTotal
3,94,120.00
Amount (in Words) : Three Lakhs Ninety Four Thousand One Hundred Twenty rupees only
Sales Conditions
Delivery Terms : 2-4 WEEKS Payment Terms : 1 0 % ADVANCE, balance against PI
Freight Terms : E x t r a Validity of Offer : 30 Days
Packing And Forwarding Terms : Warranty Clause: 1 years
Special Notes:

For Real Value Safety Consultants

Rajeev Singh - 9810222585