®

Digicharger D4 User Manual

The New Benchmark in Intelligent Chargers

The Nitecore D4 is a universal smart charger compatible with almost all cylindrical
rechargeable batteries, thus eliminating the need to own several chargers. The D4 Charging LiFePO4 batteries
automatically detects Li-ion, Ni-MH and Ni-Cd batteries, and through manual selection is also To charge LiFePO4 batteries, simply press and hold the side “MODE” button for more than 2
capable of charging LiFePO4 batteries. Intelligent charging circuitry selects the optimal seconds right after the battery test completes and “LiFePO4” will appear on the LCD display
charging mode (CC, CV and dV/dt) for a given battery and each of the D4’s four to indicate the activation of LiFePO4 charging mode. To exit LiFePO4 charging mode, simply
microcomputer-controlled charging slots then monitors and charges the battery press and hold the side “MODE” for more than 2 seconds once again, or remove and reinstall
independently. Furthermore, an integrated digital LCD screen clearly displays charging the battery.
progress, voltage, current and time while an intelligent automatic power-off function
terminates current when charging is complete. Charging Small Capacity Batteries
The Nitecore D4: The world’s most advanced fully-automatic digital charger. It’s as simple as When charging batteries with a capacity lower than 750mAH (e.g. AAA, 10440 and 16340
insert, detect and charge. batteries), a low charging current is recommended to help extend battery life.
To select a low charging current, while in regular charging mode, simply press the side
“SLOT” button to select a desired battery slot and then press and hold the side “MODE”
Features button for more than 1 second until “LOW” is displayed on the LCD display indicating
activation of low current charging mode. To exit, simply press and hold the side “MODE”
• Capable of charging 4 batteries simultaneously
button for more than 1 second once again or remove and reinstall the battery.
• Each of the four battery slots monitors and charges independently
• Compatible with and identifies Li-ion (26650, 22650, 18650, 17670, 18490, 17500, 18350,
16340(RCR123), 14500, 10440), Ni-MH and Ni-Cd (AA, AAA, AAAA, C) rechargeable
batteries Nocturnal Charging Mode
• Optimized charging design for IMR batteries When charging a battery overnight, nocturnal charging mode is recommended. Simply press
• Integrated LCD panel clearly displays charging parameters and progress and hold the side “SLOT” button for more than 1 second in any state until the LCD backlight
• Two conveniently located side buttons allow easy selection of specific battery types and turns off thus activating nocturnal charging mode. This feature ensures a peaceful night’s
charging parameters sleep without being disturbed by the D4’s LCD backlight and blinking LEDs. To exit nocturnal
• Intelligent circuitry detects the battery type and status before entering automatic charge mode and turn the backlight on again, press and hold the side “SLOT” button for more than 1
mode (CC, CV, dV/dt) second again.
• Automatically detects battery power status and selects the appropriate voltage and charge
mode (with the exception of LiFePO4 batteries which require manual selection)
• Compatible with LiFePO4 batteries
• Compatible with small capacity batteries Battery Activation
• Automatically stops charging when complete For every installed battery, the D4 will activate the battery by charging it for 6 seconds at a
• Features over-charge prevention to protect batteries low current. If zero voltage is detected, “Err” will be displayed on the LCD screen. If activation
• Features temperature monitoring to prevent overheating fails the first time, please remove and reinstall the battery once again and activate for the
• Made from durable ABS (fire retardant / flame resistant) second time.
• Features reverse polarity protection Note: The D4 is not recommended for use with over-discharged (zero volt) UNPROTECTED
• Designed for optimal heat dissipation Li-ion batteries. Li-ion batteries without a protection circuit can potentially cause a fire or
• Certified by RoHS, CE, FCC and CEC explosion.
• Insured worldwide by Ping An Insurance (Group) Company of China, Ltd.

Specifications Overtime Prevention

The D4 is equipped with an advanced ‘overtime’ safety function. The D4 will individually
Input: AC 100-240V 50/60Hz 0.35A(MAX), DC 12V 1A
monitor the elapsed charging time for each battery slot and if a particular slot exceeds 20
Output voltage: 4.2V ±1% / 3.7V ±1% / 1.48V ±1%
hours, the D4 will automatically power off the slot and display full charging bars to indicate
Output current: 375mA x 4 / 750mA x 2
completion of the charging process. This feature reduces the risk caused by batteries of
Compatible with:
lesser quality.
Li-ion / IMR / LiFePO4:26650, 22650, 18650, 17670, 18490, 17500, 18350, 16340(RCR123),
14500, 10440
Ni-MH / Ni-Cd: AA, AAA, AAAA, C
Dimensions: 5.63” × 3.90” × 1.42” (143mm× 99mm×36mm)
Weight: 8.43oz (239g) (without batteries and power cord)
Precautions
1. The D4 is compatible with batteries of varying sizes, therefore when charging certain
batteries (such as 26650 and AAA), manual adjustment of the battery’s position within the slot
is recommended, as to ensure solid contact is made between both sides of the battery and
Operating instructions the charging slot’s metal contact points.
1. Plug one end of the power cord or car charging adapter into the D4 charger. Plug the other 2. The D4 should only be used indoors or inside a motor vehicle and under no circumstances
end of the cord into an applicable outlet. The LCD display and all battery indicator bars will should it be exposed to water, high humidity and low or high ambient temperatures.
illuminate as the charger runs a quick self-test. When testing is complete, the name of the 3. Do not disassemble or modify the charger.
product will appear on the screen, the bars will dim and the charger will enter into stand-by 4. Children under the age of 18 should be supervised by an adult when using the D4.
mode. If no batteries are detected within 1 minute, the charger will automatically enter Eco 5. The D4’s safe operating temperature is between 0ºC--40ºC。
Mode (the LCD backlight will turn off). When a battery is installed while in Eco Mode, simply 6. Do not use or store the charger near open flames, direct sunlight, heating devices or other
press any button to activate the LCD display. high-temperature environments.
2. The D4 features four charging slots, each of which charges and monitors a battery
independently. Rechargeable batteries of differing chemistries and voltages may be charged
simultaneously using either 1, 2, 3 or all 4 of the charging slots. When inserting a battery,
ensure the positive and negative ends correspond with the positive (+) and negative (-)
Warranty Service
All NITECORE® products enjoy a comprehensive after sale warranty service. A
symbols on the charger. Incorrect installation will result in failure to initiate the charging
malfunctioning NITECORE® charger may be exchanged for a replacement by a local
process.
authorized distributor/dealer within 12 months of purchase. Beyond 12 months, the warranty
Note: The D4 is capable of charging 3.7v Li-ion rechargeable cells, 1.2v, Ni-MH/Ni-Cd
covers labor costs and maintenance with the exclusion of accessories or replacement parts.
rechargeable batteries and 3.2v LiFePO4 batteries. See above for description of battery
The warranty is nullified in any of the following situations:
sizes.
1. The product(s) is/are broken down, reconstructed and/or modified under unauthorized
3. When a battery is first inserted the D4 will run a short test causing the battery indicators conditions.
bars to illuminate in sequence from the bottom to the top. When the test is complete, the D4 2. The product(s) is/are damaged through improper use.
will enter into charging mode. If any unusual circumstances have been detected, e.g. a 3. The product(s) is/are damaged by leakage of batteries.
backward battery installation, the battery indicator bars will blink rapidly and “Err” will be
For further details of Nitecore’s warranty service, please contact a regional distributor/dealer
presented on the screen to urge an immediate removal of the battery.
or send an email to [email protected]
4. While in charging mode, the battery indicator bars will blink rhythmically to indicate the
on-going charging process. The battery’s power status and charging progress is indicated by The Nitecore official website shall prevail in case of any product data changes.
the number of bars that illuminate steadily. The LCD display will also display battery voltage,
followed by charging current and elapsed charging time in sequence. Pressing the side Validation code and QR code on package can be verified on Nitecore
“MODE” button will cycle through these charging parameters. To view the charging progress website.
of a different charging slot press the side “SLOT” button to select a desired slot. When
charging is complete, all five battery indicator bars will illuminate steadily and “Chg.Finish”
will appear on the LCD display.
Note: When the D4 is charging three or four batteries, charging current will be set to 375mA.
Alternatively, when charging either one or two batteries, charging current will be set to
Please follow our facebook for
750mA.
SYSMAX Industry Co., Ltd. more info: NITECORE Flashlights
TEL: +86-20-83862000
WARNING: THE D4 IS RESTRICTED TO CHARGING Li-ion, IMR, 3.7V LiFePO4, Ni-MH and
FAX: +86-20-83882723
Ni-Cd RECHARGABLE BATTERIES ONLY. NEVER USE THE D4 FOR OTHER TYPES OF E-mail: [email protected]
BATTERIES AS THIS COULD RESULT IN BATTERY EXPLOSION, CRACKING OR LEAKAGE, Web: www.nitecore.com
Address： Rm1401, Glorious Tower, 850 East Dongfeng Road, Guangzhou,
CAUSING PROPERTY DAMAGE AND/OR PERSONAL INJURY. China 510600

Thanks for purchasing NITECORE!