HIGH PERFORMANCE BUTTERFLY VALVE HP 112

TECHNICAL DATA TO
Nominal diameter: DN 80 - DN 600 - Th
on
Face-to-face:: EN 558 Series 13 (di
others upon request tor

Flange accomodation: ASME Class 150

ASME Class 300
AS 4087 PN 16/21

Flange Surface Design: EN 1092 Form A/B

ASME RF, FF

Marking: EN 19

Tightness check
- for R-PTFE seat: EN 12266 (Leakage rate A)
- for Inconel seat: EN 12266 (Leakage rate B)
ISO 5208, Category 3
PR
Temperature range: -60°C bis +600°C
TU
Operating pressure: ≤ DN 150, 40 bar
> DN 150, 25 bar

Vacuum: up to 1mbar absolute

Double-flanged butterfly valve in double-eccentric construction. Re-

liable sealing even with extreme temperature and pressure condi-
tions.

The
perf
vers
Valv
FEATURES dev
- Shut-off and control valve for gaseous and liquid media ava
- Disc and shaft have double-eccentric bearing
- Seat ring systems available: R-PTFE, Inconel and Fire Safe
- Maintenance-free
- Long service life, even at high switching frequencies Kv
- Seal variants: - Th
soft-sealing (R-PTFE) max. 230°C the
metallic sealing (Inconel) max. 400°C tur
special material for temperatures > 400°C 86

- Th
ba
the
rie
GENERAL APPLICATIONS:
- Chemical and petrochemical industry - Pe

- Hot water and steam systems

- District heat supply
- Th
- Vacuum systems an
- Shipbuilding
- Av
- Gas process technology
Sealing system with inside metallic thrust collar.
- Heavy duty services For
our

3.6


HP 112
DIN_A4_Einzelseite.indd 1
03-06_HP112_2012.indd 2 13.06.2012 14:42:49
 HIGH PERFORMANCE BUTTERFLY VALVE HP 112

Fl/ A M

H1 □G Fl/ G
F

A
C

ØDa

Z1

Z2
B

E
HP 112 with bare shaft end according to EN ISO 5211

Po
Dimensions [mm]
1
DN Size A B C ØDa ØDa E F FL/A FL/G G H1 Z1 Z2 Weight [kg]
[mm] [in] CL 150* CL 300** CL 150 CL 300
2
80 3 142 109 251 191 210 114 95 F05 F07 12 15 - - 15 19
100 4 158 122 280 229 254 127 95 F05 F07 12 15 - - 20 24 3
150 6 195 152 347 280 318 140 98 F07 F10 14 18 62 47 32 50
200 8 225 190 415 343 381 152 98 F10 F12 17 18 123 116 50 70
250 10 268 220 488 407 444 165 103 F12 F12 22 23 180 174 70 90
4
300 12 300 255 555 483 521 178 118 F12 F14 27 28 230 226 105 150
350 14 345 304 649 534 585 190 128 F14 F14 27 28 276 270 155 210 5
400 16 375 340 715 597 648 216 136 F14 F16 36 36 317 311 205 255
450 18 412 366 778 635 711 222 156 F16 F16 36 36 384 380 245 315
6
500 20 441 399 840 699 775 229 166 F16 F16 46 46 428 423 295 385
600 24 524 468 992 813 914 267 255 F25 F25 55 55 501 494 470 615
7
* Acc. to ASME Class 150 max. 19,2 bar Subject to change without notice
**Acc. to ASME Class 300 DN 200 - DN 600 max. 25 bar 8
Acc. to ASME Class 300 DN 80 - DN150 max. 40 bar

F012-K1_2010.indd 1 1 2
DIN_A4_Einzelseite.indd
03-06_HP112_2012.indd 13.06.2012 14:42:50
 HIGH PEFORMANCE BUTTERFLY VALVE HP 112

MATERIAL SPECIFICATION AND PARTS LIST

25
15 26

8 18 28
27

12 7
10
14 16

2 9 6
4
17
5
17
3
21*
24
11
13 22

9 6
23
20
19
Pts. 21 - 23:
Cover plate for
valve >DN300

Pos. Description Material Material No. ASTM Pos.

Description Material Material No. ASTM
1 Body 14
Threaded pin
Carbon Steel GP240GH 1.0619 WCB Stainless steel A4-70 B8M
0 Stainless Steel G-X5CrNiMo19-11-2 1.4408 CF8M 15 Hex.-nut
2 Disc Stainless steel A4-70 B8M
Stainless Steel G-X5CrNiMo19-11-2 1.4408 CF8M 16 Spacer sleeve
3 Clamping ring Stainless steel X6CrNiMoTi17-12-2 1.4571 316 Ti
Steel S235JR 1.0038 283-C 17 Graphite seal (for metal seat)
Stainless Steel X2CrNiMo17-12-2 1.4404 316 L Graphite
Stainless Steel X6CrNiMoTi17-12-2 1.4571 316 Ti 18 Belleville spr. washer
4 Shaft 50CrV4 1.4310
Stainless Steel X4CrNiMo16-5-1 1.4418 19 Plug screw
5 Seat ring Stainless steel A2-50 B8 M
R-PTFE PTFE-Compound Machining steel 11SNPb30 1.0718 ni-pld. A29
Inconel Inconel 625 20/21* Seal
6 Shaft bearing Graphite / Copper*
Stainless Steel X5CrNiMo17-12-2 1.4401/PTFE 316 PTFE PTFE / Steel*
Stainless Steel X6CrNiMoTi17-12-2 1.4571 ni-pld 316 Ti 22 Cover plate
7 Gland flange Stainless steel X5CrNiMo17-12-2 1.4401 304
e
Stainless steel G-X5CrNiMo19-11-2 1.4408 CF8M Stainless steel G-X5CrNiMo19-11-2 1.4408 CF8M
8 Thrust collar 23 Hex.-socket screw
Stainless Steel X5CrNiMo17-12-2 1.4401 304 Stainless steel A4-70 B8M
Stainless Steel X2CrNiMo17-12-2 1.4404 304 24 Bearing ring
Stainless Steel X6CrNiMoTi17-12-2 1.4571 316 Ti Stainless steel X6CrNiMoTi17-12-2 1.4571 316 Ti
9 Bearing ring 25 Bracket
Stainless steel X6CrNiMoTi17-12-2 1.4571 chr-pld. 316 Ti Steel S235JR+AR 1.0038
Stainless steel X2CrNiMoN22-5-3 1.4462 chr-pld 26 Hex. bolt
10 Support washer Steel St galvanized
Stainless steel X6CrNiMoTi17-12-2 1.4571 316 Ti Stainless steel A2-70 B8
11 Taper pin 27 Washer
Stainless steel X4CrNiMo16-5-1 1.4418 Steel St galvanized
12 Shaft seal Stainless steel A4 8
Graphite 28 Hex. nut
PTFE Steel St galvanized
13 Hex. socket screw Stainless steel A2-70 8
Stainless steel A4-70 B8M
X1NiCrMoCuN25-20-7 1.4529 Other materials upon request.
Subject to change without notice

DIN_A4_Einzelseite.indd 3 23.07.2010 12:12:48

13.06.2012
07.05.2012 14:42:51
13:45:04
 HIGH PERFORMANCE BUTTERFLY VALVE HP 112

TORQUE Operating pressure

- The values specified are based DN Size 10 [bar] 16 [bar] 25 [bar] 40 [bar]
on the initial breakaway torque [mm] [in] R-PTFE Inconel R-PTFE Inconel R-PTFE Inconel R-PTFE Inconel
(disc disengages from seat, 80 3 28 55 30 65 34 90 38 100
torque then drops)
100 4 51 90 61 100 80 120 93 140
150 6 125 170 136 220 168 300 220 360
200 8 205 350 260 430 280 505 - -
250 10 485 505 550 620 600 860 - -
300 12 584 740 700 970 855 1280 - -
350 14 740 815 930 1050 1200 1370 - -
400 16 1150 1530 1640 2240 2460 2900 - -
450 18 1150 1700 1750 2500 2700 3500 - -
500 20 1210 2010 1800 2760 2800 4260 - -
600 24 4000 4500 4600 5740 6200 8080 - -
All values in Nm

PRESSURE/TEMPERA- 45
TURE DIAGRAM
40
Pressure control line for
GS-C25 body material 35
and metal seat DN
50
30 -D
N1
Pressure control line for 50
Pressure (bar)

1.4408 body material and 25

metal seat
20 DN
200
Pressure control line for - DN
600
R-PTFE 15
The diagram illustrates the
performance of the standard 10
R-PTFE-seat

version of our valve type HP.

Valves for higher pressure or 5
deviating temperature are
available upon request. 0
-100 -50 0 50 100 150 200 250 300 350 400 450 500 550 600
Temperature (°C)

Kv-VALUES Opening angle α°

- The Kv-values [m³ per hour] is DN Size
the flow of water at a tempera- [mm] [in] 20° 30° 40° 50° 60° 70° 80° 90°
ture of 5°C to 30°C (41°F to 80 3 7 30 50 68 82 97 113 115
86°F) at ∆p of 1 bar 100 4 22 60 97 119 164 199 223 251
150 6 63 109 162 250 391 588 814 845
- The Kv-values specified are
based on tests carried out by 200 8 96 168 301 509 742 1107 1581 1747
the Delfter Hydraulics Laborato- 250 10 264 458 682 980 1421 2083 2882 2889
ries, the Netherlands 300 12 397 625 956 1368 1938 2778 3794 3940
350 14 460 720 1100 1650 2500 3400 4800 5400
- Permissible velocity of flow
Vmax 4,5 m/s for liquids, 400 16 550 870 1250 2000 3200 4800 6800 8080
Vmax 70 m/s for gases 450 18 730 1200 1800 3100 4600 6400 8400 10500
500 20 920 1600 2600 4100 6000 8500 12100 12800
- The throttle function is linear at 600 24 1370 2250 3780 4950 9000 12500 17100 18500
an angle 30° to 70°
Subject to change without notice
- Avoid cavitation

For further values, please contact

our engineers.


www.ebro-armaturen.com
[email protected]

04.2012

DIN_A4_Einzelseite.indd 4 13.06.2012 14:42:51

07.05.2012 13:45:16