PULSAPRO

HYDRAULIC DIAPHRAGM METERING PUMP

®

Flow:
up to 270 gph (1,022 lph)

Pressure:
up to 5,100 psi (350 bar)

Temperature:
up to 275°F (135°C)

Viscosity:
up to 1,000 cPs

API-675 ENGINEERED PRODUCTS

 PULSAPRO SERIES ®

PULSAFEEDER EXPERTISE MATERIALS OF CONSTRUCTION

For over 75 years, Pulsafeeder, Inc. continues to be a global leader in chemical dosing innovation Wet End: 316LSS, PVC, GF-PPL, GF-PTFE, Alloy C, Monel®, DuplexSS, PVDF, Titanium
and fluid handling technology. The PulsaPro Series is the next technological evolution for the Flat Diaphragm: PTFE, Metallic
Petroleum, Chemical Processing, Energy and Water Treatment markets. PulsaPro builds from its
legendary predecessor, Pulsa Series, with expanded performance, improved robustness, and new HYDRAtube Diaphragm: FKM, CSM, PFA
features to simplify operation and maintenance. HYDRAcone Diaphragm: FKM, CSM

PulsaPro pumps are positive displacement reciprocating metering pumps that combine the high Pump Body: Cast Iron
efficiency of a plunger pump with the sturdiness of a diaphragm seal to eliminate leakage. They Pump Base: Steel, Stainless Steel
provide maximum accuracy and repeatability with the dependability of a 5 year drive train warranty.
Available in a wide range of materials and diaphragm designs, PulsaPro pumps offer a diverse
range of fluid handling solutions.
MARKETS & TYPICAL APPLICATIONS
MARKETS: TYPICAL APPLICATIONS
PRODUCT SPECIFICATIONS ●● Chemical Processing ●● Amines ●● Defoamers
●● Flows up to 270 gph (1,022 lph) ●● Petrochemical ●● Oxygen Scavengers ●● Disinfectants
●● Pressures up to 5,100 psi (350 bar) ●● Oil & Gas ●● Oil additives ●● Acids
●● Steady state accuracy of +/-0.5% of set point ●● Power & Energy ●● Demulsifiers ●● Caustics
●● Repeatability of +/-0.5% of rated capacity ●● Wastewater Treatment ●● Methanol ●● Biocides
●● Linearity of +/-0.5% of rated capacity ●● Potable Water Treatment ●● Corrosion inhibitors ●● Ethylene Glycol
●● Full motion stroke length control mechanism ●● General Industries ●● Anti-scalants ●● Other Chemical Feed
●● Manual stroke length capacity control with 100:1 turndown
●● Fluid temperatures from -10 to 275°F (-23 to 135°C) MODELS
●● Viscosity up to 1,000 cPs
●● Net Positive Inlet Pressure (NPIP) required: 3 psi (0.2 bar)
●● Compliant to API-675, CE and ATEX standards
●● Diaphragm types: flat, double diaphragm with pressure leak detection, HYDRAtube or HYDRAcone
●● Modular configurations: simplex, duplex, triplex and multiplex up to 17 pumps
●● 4-bolt tie bar
●● Connection types: NPT, BSPT, raised-face flange
●● Motor frames: 56C, 143/145TC, 182/184TC, IEC71, IEC80, IEC90

PulsaPro 680 PulsaPro 880 PulsaPro 7120

Monel® is a registered trademark of Special Metals Corporation.

2 pulsa.com 3
 PULSAPRO TECHNOLOGY ®

PERFORMANCE
Flow (lph) FLAT DIAPHRAGM
2 19 189 1,893 18,927
10,000 688 The flat diaphragm construction is the standard design ensuring
high performance metering in a leak-free operation. PulsaPro
diaphragms are available in a variety of materials and can handle
5,100 psi (350 bar) a wide range of chemicals. As with all PulsaPro diaphragm
constructions, the flat diaphragm is hydraulically balanced and
operates stress free, providing exceptional life and accuracy.

DOUBLE DIAPHRAGM (FLAT)

Pressure (bar)
WITH LEAK DETECTION
Pressure (psi)

500 34
PulsaPro offers a rugged sandwich-style double diaphragm
construction for increased protection against leaks in the case
of a system upset that causes the primary diaphragm to fail.
PULSAlarm® provides a pressurized leak detection technology
to monitor the diaphragm integrity and can signal an alarm or stop
the pump at the first sign of diaphragm failure. PULSAlarm® is
designed to contain full rated pressure up to 3,000 psi (207 bar),

PULSAPRO 7120
PULSAPRO 880
PULSAPRO 680

and is rated NEMA Type 7, EEMAC7 Class 1, Division 1, Groups

COMING SOON

COMING SOON

COMING SOON
C & D, Class 1, Zone 1, Groups IIA & IIB; UL, cUL, CE, ATEX. An
optional pressure gauge is also available for visual indication of
25 2
diaphragm integrity at the pump.
1 5 50 500 5,000
Flow (gph)

DIMENSIONAL DRAWINGS HYDRATUBE®

The HYDRAtube® is the choice for sheer sensitive, high viscosity
fluids and slurries. Its straight, large, flow through design eliminates
PUMPS PulsaPro 680 PulsaPro 880 PulsaPro 7120
clogging and flow restrictions. It offers double diaphragm safety
A - inches 13.59 / 12.11 13.59 / 12.11 15.45 / 13.98 as standard as well as optional slurry valves. Available in FKM,
CSM or PFA, it can be utilized with the most corrosive or acidic
DISCHARGE PORT A - mm 345.2 / 307.7 345.2 / 307.7 392.5 / 355.1
chemicals. Optional ChemAlarm monitors the electrical conductivity
B - inches 6.00 6.00 7.76 of the intermediate liquid between the HYRDAtube® and secondary
G
B - mm 152.4 152.4 197.0 diaphragm to detect diaphragm failure and, can signal an alarm or
F
A
C - inches 0.13 0.13 0.13 stop the pump.
B
C - mm 3.4 3.4 3.4
D - inches
SUCTION PORT
C E 9.29 9.29 11.12
D - mm 235.9 235.9 282.4 HYDRACONE®
D E - inches 2.66 2.66 3.83 The HYDRAcone’s self-priming head features a conical elastomer
E - mm 67.6 67.6 97.2 diaphragm. It is particularly well suited for high-lift conditions, high
viscosities, and low density slurries. It has a straight, flow through
F - inches 16.37 / 8.00 16.37 / 8.00 16.37 / 8.00
DISCHARGE PORT
design and optional slurry valves. The HYDRAcone® is available
F - mm 415.8 / 203.1 415.8 / 203.1 415.8 / 203.1 in high performance fluorocarbon elastomers.
G G - inches 8.19 / 4.00 8.19 / 4.00 8.19 / 4.00
F G - mm 207.9 / 101.5 207.9 / 101.5 207.9 / 101.5
A
B Values shown are (max / min)
SUCTION PORT THE DIMENSIONS GIVEN MAY DIFFER DEPENDING ON PUMP CONFIGURATION.”
C E
4 pulsa.com 5
D
 F E AT U R E S & B E N E F I T S
PATENTED HYDRAULIC DIAGNOSTICS 4-BOLT TIE BAR
●● Immediate visual indication of pump performance ●● Provides stability and resistance to pipe stress
●● Simple to monitor diaphragm integrity & oil level ●● Helps to promote leak-free operation
●● Instantaneous auditing of system overpressurization ●● Allows for easy check valve removal without disconnecting piping

MANUAL STROKE ADJUSTMENT

PUSH-TO-PURGE VALVE
●● Large easy-grip hand wheel with easy-to-read dial
●● Releases entrained air trapped in the oil
●● Adjustable from 0%-100% stroke length
●● Visual indication of air bleed through diagnostic window
●● Resolution of +/-0.5% for accurate control
●● External spring-loaded button assists in hydraulic fluid priming
●● Integrated stroke lock mechanism to maintain desired setting

HYDRAULIC BYPASS VALVE PRECISION BALL VALVE DESIGN

●● Provides protection for pump overpressurization ●● Knife edge seats
●● Externally adjustable ●● Accurate, efficient flow transfer
●● Continuous visual inspection ●● Simple, three component design

HYDRAULIC PERFORMANCE VALVE

CLOSE-COUPLED DESIGN
●● Provides resilience to system upsets
●● Eliminates the potential for damage due to misalignment
●● Replenishes hydraulic oil on suction stroke only
●● Eliminates replacement costs due to misalignment wear and tear
●● Eliminates the need for process side dish plate
●● Motor rotation does not affect pump performance
●● Lowers NPIP requirement to 3 psi

MULTIPLE MOTOR
NON-VENTED GEARBOX DESIGN
MOUNTING ARRANGEMENTS
●● Fully sealed, non-vented gearbox prevents ingress of contaminants
●● Provide options for placement in existing footprints
●● Gearbox meets IP56 rating for use in the harshest environments
●● Vertical or horizontal mounting available
●● Super compact design allows for installation in the tightest areas
●● Sturdy, safe and secure

6 pulsa.com 7
C U S TO M E N G I N E E R I N G
ENGINEERED SOLUTIONS
Pulsafeeder, Inc. is a leader in providing metering pump
technologies for both stand-alone pumps and skid
mounted configurations. By listening to the needs of our
customers, Pulsafeeder engineers and fabricates skids
to your specifications, and ensures they are compliant
with industry and international standards.

We understand that each chemical has its own unique

set of challenges that must be taken into consideration in
the design, selection, and application of the pump systems.
No matter what chemicals you are dosing, safety, reliability,
and precise control are required to optimize the chemical
reaction and reduce operating costs.

Known for their rugged construction and dependability,

our pumps and systems are manufactured to the highest
level of performance and quality. Along with providing
integrated engineering solutions, we offer full warranty
packages along with exceptional after-sales service.

PARTS, KITS & ACCESSORIES

KOPKIT® (KEEP ON PUMPING KIT)

Designed to guard against unnecessary downtime and assure the highest level
of efficient and uninterrupted service from your pump. In the event of a breakdown,
KOPkit® will put you back in business fast!

METERING PUMP ACCESSORIES:

●● Pulsation Dampeners ●● Calibration Columns
●● Back Pressure Valves ●● Y-Strainers
●● Pressure Relief Valves

ENGINEERED PRODUCTS

Pulsafeeder, Inc.
D I S T R I BU TO R L O O K U P

2883 Brighton Henrietta Town Line Rd

Rochester, NY 14623
VISIT OUR

Phone: +1 (585) 292-8000

[email protected]
pulsa.com

© Copyright 2016 Pulsafeeder. All Rights Reserved. PulsaEPO_ PulsaPro_Rev1116