FX‑70-6MP ™

Multi-Purpose Marine Epoxy Grout

DESCRIPTION
CSI Specification: 03 63 00 Epoxy Grouting

FX-70-6MP™ Multi-Purpose Marine Epoxy Grout is a three-component, 100% solids, moisture-tolerant epoxy grout specifically
designed for underwater applications as part of the FX‑70 ® Structural Repair and Protection System.
WHERE TO USE FEATURES
ASSESSMENT

• As a high-strength epoxy grout component of the • Easily pumped or poured • Can be placed underwater
FX‑70 structural repair and protection system • High-strength, low without de-watering
• As a high-strength epoxy grout in wet or dry applications absorption, impact- • Resistant to chemical
• As an underwater repair mortar resistant grout and aggressive water
environments

PRODUCT DATA TECHNICAL INFORMATION

All testing performed at 73˚F (23˚C) and 50% R.H. All testing performed at 73°F (23°C) and 50% R.H. (+/- 2°F (1.1° C))
Generic Description Standard Flow2 High Flow1
Underwater Epoxy Grout Compression Strength
Packaging ASTM C579, Test Method B
FX70-6MPKT3-2 contains: 1 day 4,300 psi 29.6 MPa 3,600 psi 24.8 MPa
• 3 US gallon (11.4 L) epoxy kit + 2 days 5,500 psi 37.9 MPa 4,900 psi 33.8 MPa
(2) 50 lb. (22.7 kg) bags of filler 3 days 6,500 psi 44.8 MPa 6,000 psi 41.4 MPa
FX70-6MPKT3-3 contains: 4 days 8,700 psi 60.0 MPa 7,800 psi 53.8 MPa
• 3 US gallon (11.4 L) epoxy kit + 7 days 9,500 psi 65.5 MPa 7,900 psi 54.5 MPa
(3) 50 lb. (22.7 kg) bags of filler 28 days 11,000 psi 75.8 MPa 9,900 psi 68.3 MPa
FX70-MPKT15-10 contains: Flexural Strength
• 15 US gallon (56.8 L) epoxy kit +
ASTM C580, 7 days
(10) 50 lb. (22.7 kg) bags of filler
Ambient 3,500 psi 24.1 MPa 2,900 psi 20.0 MPa
FX70-MPKT15-15 contains:
• 15 US gallon (56.8 L) epoxy kit + Tangent Flexural Modulus
(15) 50 lb. (22.7 kg) bags of filler ASTM C580, 7 days
Color Ambient 3.8 x 10 5 psi 2,600 MPa 3.1 x 10 5 psi 2,100 MPa
Dark tan Tensile Strength
Mixing Ratio ASTM C307
Epoxy: 2A:1B 7 days 1,800 psi 12.4 MPa 1,700 psi 11.7 MPa
Filler: 100–150 lb. (45–68 kg) per Shrinkage (Unrestrained Linear)
3 US gallon (11.4 L) unit of epoxy ASTM C531 0.08% 0.09%
Product Yield Effective Bearing Area
1.07 ft.3 (0.029 m3) for 3 US gallon (11.4 L)
ASTM C1339 >85% – high
+ 2 bags mix
1.34 ft.3 (0.038 m3) for 3 US gallon (11.4 L) Density
+ 3 bags mix ASTM C905
Pot Life Uncured 131 lb./ft.3 20.61 KN/m3 118 lb./ft.318.56 KN/m3
45 minutes at 70°F (21°C) Bond Strength to Concrete
Storage ASTM C882
Store dry between 40° and 95°F (4°–35°C) 7 days 2,500 psi 17.2 MPa
Shelf Life
2 years in unopened packaging
VOC
2 g/L (mixed)

Notes 1. High flow = 3 US gallons (11.4 L) of epoxy to 100 lb. (45 kg) of filler
2. Standard flow = 3 US gallons (11.4 L) of epoxy to 150 lb. (68 kg) of filler

strongtie.com/RPS | (800) 999-5099 © 2018 Simpson Strong‑Tie Company Inc.

FX‑70-6MP™ Multi-Purpose Marine Epoxy Grout 2

LIMITATIONS
• Do not apply in water temperatures below 40°F (4°C) or above 95°F (35°C).
PLANNING

• Minimum application thickness is 1/2 in. (12.7 mm).

• Underwater product placement should be attempted only by certified and experienced diving contractors.

SURFACE PREPARATION
Surface must be at least 40°F (4°C) prior to application. All surfaces must be sound and free of loose rust, marine growth,
oil, and other contaminants. Consult a qualified professional engineer in all cases when section loss exceeds 25%.
Concrete: Prepare surface by high-pressure water-blasting or other mechanical means to achieve ICRI Guideline
310.2R CSP 6-9. Repair or replace any reinforcing steel as determined by a qualified professional engineer.
Steel: Prepare surface by high-pressure water-jetting or other mechanical means necessary to achieve SSPC-SP 12/
NACE 5 WJ-4. Repair or replace any structural steel elements with excessive section loss as determined by a qualified
professional engineer.
PREPARATION

Wood: Prepare surface by high-pressure water-blasting or other mechanical means necessary to achieve a sound
surface, free of all contaminants.
All submerged forms should be installed by certified professional divers. All forms must be sealed appropriately to
prevent grout leakage during installation.

MIXING
For optimal product performance, condition individual components to 70°F (21°C) and stir liquid components thoroughly
prior to use. Proportion Component “A” and Component “B” at a 2A:1B ratio by volume in a clean pail. Mix thoroughly
with a low-speed (300–600 rpm) drill and mixing paddle for 2–3 minutes, scraping unmixed material from sides
and bottom of mixing container as needed, taking care to prevent air entrapment. Continue mixing, and slowly add
Component “C” to avoid clumping, at a rate of 100–150 lb. per 3 US gallon unit of epoxy, scraping the sides and bottom
as needed. Mix for approximately 2–3 minutes or until a uniform consistency is achieved. For large pours requiring
multiple units, mix the liquid components as instructed above, then transfer the liquid to a mortar mixer and add
Component “C,” mixing to a uniform consistency.

APPLICATION
FX-70-6MP™ can be troweled, poured, pumped, or tremied. Properly mixed FX-70-6MP can be poured from the top
of the jacket through standing water. For pumping applications, pump properly mixed FX-70-6MP as follows: Install
EXECUTION

pumping ports at 90 degrees from tongue and groove joint, alternating sides. Place the first port approximately 1 ft.
(300 mm) from the bottom of the jacket. Place subsequent ports at a maximum 5 ft. (1.5 m) vertical spacing, alternating
sides. Begin pumping from the lowest port and move up from port to port. Do not exceed 10 ft. (3 m) pumping distance
from any individual port. All submerged forms should be inspected by a certified professional diver during the filling
process to check for leaks and proper placement. For tremie applications, make sure the hose extends all the way to the
bottom of the form. Fill the form to the desired level, allowing water to displace from the top of the form. Depending on the
depth of the pour and size of the vessel, the tremie hose may need to be retracted as the form fills to maintain flow.

strongtie.com/RPS | (800) 999-5099 © 2018 Simpson Strong-Tie Company Inc.

FX‑70-6MP™ Multi-Purpose Marine Epoxy Grout 3

CAUTION
Component “A”: May cause eye and skin irritation. May cause skin sensitization.
Component “B”: CORROSIVE! Harmful if swallowed. Harmful if absorbed through skin. Severe irritation to eyes.
Moderate skin irritant. Components of the product may affect the nervous system.
Component “C”: May cause serious eye and skin irritation or damage. Contains silica; do not breathe dust.
Protective Measures: The use of safety glasses and chemical-resistant gloves is recommended. Use appropriate
clothing to minimize skin contact. The use of a NIOSH-approved respirator is required to protect respiratory tract when
ventilation is not adequate to limit exposure below the permissible exposure limit (PEL). Refer to Safety Data Sheets
(SDS) available at strongtie.com/sds for detailed information.

FIRST AID
Eye Contact: Immediately flush eyes with plenty of cool water for at least 15 minutes while holding the eyes open.
If redness, burning, blurred vision, or swelling persists, seek medical advice.
Skin Contact: Remove product and wash affected area with soap and water. Do not apply greases or ointments.
Remove contaminated clothing. Wash clothing with soap and water before reuse. If redness, burning, or swelling
persists, seek medical advice.
Ingestion: DO NOT INDUCE VOMITING. Seek medical advice. Never administer anything by mouth to an
unconscious person. Rinse mouth out with water. Never leave affected person unattended. If vomiting occurs
spontaneously, lay affected person on their side, keeping head below hips to prevent aspiration of material into lungs.
Inhalation: Remove affected person to fresh air. If affected person continues to experience difficulty breathing, seek
medical advice.
SAFETY

CLEAN-UP
SPILLS
Liquid or Mixed Material Spills: Construct a dike to prevent spreading. Soak up with absorbent material such as
clay, sand or, other non-reactive material. Place in leak-proof containers. Keep out of sewers, storm drains, surface
waters, and soils.
Powder Spills: Sweep or vacuum material and place in a suitable container. Keep out of sewers, storm drains,
surface waters, and soils.
SURFACE CLEAN
Liquid or Mixed Materials: Wipe up uncured material with cotton cloths. If desired, scrub area with abrasive, water-
based cleaner and flush with water. If approved, solvents such as FX-Epoxy Cleaner, ketones (MEK, acetone, etc.),
or adhesive remover can be used. Cured material can be removed only by mechanical means.
Powder: Remove any residue with hot soapy water.
TOOLS AND EQUIPMENT
Liquid or Mixed Materials: Remove uncured material with FX-Epoxy Cleaner, ketones (MEK, acetone, etc.),
or adhesive remover. Cured material can only be removed by mechanical means.
Powder: Clean with hot soapy water immediately after use.
SKIN
Use a non-toxic, pumice-based soap, citrus-based hand cleaner, or waterless hand cleaner towel.
Never use solvents to remove product from skin.
DISPOSAL
Dispose of container and unused contents in accordance with federal, state, and local requirements. Containers may
be recycled; consult local regulations for exceptions.

LIMITED WARRANTY
This product is covered by the Simpson Strong-Tie RPS Product One-Year Limited Warranty, which is available
at strongtie.com/limited-warranties or by calling Simpson Strong-Tie at (800) 999-5099.

Distributor

IMPORTANT INFORMATION
It is the responsibility of each purchaser and user of each product to determine the suitability of the product for its intended use. Prior to using any product, consult a qualified design professional for
advice regarding the suitability and use of the product, including whether the capacity of any structural building element may be impacted by a repair. As jobsite conditions vary greatly, a small-scale
test patch is required to verify product suitability prior to full-scale application. The installer must read, understand, and follow all written instructions and warnings contained on the Limited Warranty,
product label(s), Product Data Sheet(s), Safety Data Sheet(s) and the strongtie.com website prior to use. For industrial use only by qualified applicators. KEEP OUT OF REACH OF CHILDREN!

WARNING! Cancer and reproductive harm — www.P65Warnings.ca.gov.

strongtie.com/RPS | (800) 999-5099 © 2018 Simpson Strong-Tie Company Inc. T-R-FX706MP | 9/13
UPDATED | 12/7/18